Datasheet Pressure Reducing Valves V782/V82/V182
|
|
- Brian Norris
- 6 years ago
- Views:
Transcription
1 Datasheet Pressure Reducing Valves V78/V8/V8 Advantages - No auxiliary energy is required to operate the valve - Small standard tolerances due to the large control surface and the spiral spring - Can also be adjusted under working pressure - Largely maintenance-free and installable in any position - All parts which come into contact with the medium made of highly resistant plastics - Streamlined Housingshape enables high flow rates - V8 / V8 standard version with manometer Dimensions Type V8: d5dn0-d0dn00, 3/8" - " Type V8: d6dn0-d50dn0, 3/8" - /" Type V78: d6dn0-d50dn0, 3/8" - /" Materials Valve Body Type V8: PP, EPDM Type V8: PP, EPDM Type V78: PP, EPDM Connectors Solvent cement spigot DIN/ISO Fusion spigot DIN/ISO Springs Type V8: Belleville spring Type V8: Spiral spring Type V78: Spiral spring Sealing Materials Type V8: EPDM, EPDM-PTFE-coated Type V8: EPDM, FPM Type V78: EPDM, EPDM-PTFE-coated Nominal pressure PN in bar Type V8 DN0-DN50: 0.5-0, DN65 - DN80: 0.5-6, DN 00: 0.5- Type V8: Type V78: Approvals Function and design On the valve outlet, the pressure (P) acts on the piston (shown in red) which is linked to the spring (orange). The spring preload is adjustable by a screw. Thus it is possible to reach equilibrium of forces (adjusted outlet pressure). If the outlet pressure exceeds the preset value, the piston is lifted against the spring force. Due to this the valve closes and the outlet pressure decreases. If the outlet pressure is decreasing below the preset value the piston is forced downwards by the spring. Due to this the pressure reducing valve opens until equilibrium state is reached again. This prevents to exceed the set outlet pressure. This means regardless a decreasing or increasing inlet pressure the outlet pressure stays at a constant level - the outlet pressure (working pressure) is not linked to the inlet pressure. The higher the pressure on the outlet side, the more the valve closes. The more the pressure on the outlet side decreases below the preset value the more the valve opens.
2 V78 V Valve body 0. Locknut. Upper valve body. Adjusting screw 3. Diaphragm. Hexagonal socket-head bolt. Piston. Cap 5. Compressor 5. Hexagonal socket-head bolt with nut and covering cup 6. Spring plate 6. Valve bottom with O-ring 9. Compression spring 7. Ring seal. Valve body. Adjusting screw. Upper valve body. Hexagonal socket-head bolt 3. Diaphragm 3. Washer. Piston. Cap 7. Pressure plate (top) 5. Hexagonal socket-head bolt 8. Pressure plate (bottom) 6. Valve bottom with O-ring 9. compression spring 8. O-Ring 0. Locknut V8 < 0 5. Valve body. Adjusting screw. Upper valve body. Cap. Piston 5. Hexagonal socket-head bolt 6. Spring plate 6. Valve bottom with O-ring 9. compression spring 8. O-Ring 0. Locknut 0. Piston base P / T-Diagram P (bar) PP-H, PVDF T ( F) PVDF PP Types V8, V8, V78, V86, V86, V786, P0, V9, V95, V5, Z700, Z70, V85, V85 PVC-U T ( C) PP PVDF P (psi) P P: Permissible pressure in bar, psi / T: Temperature in C, F The pressure temperature diagram is based on a lifetime of 5 years and the medium water or similar media.
3 Type V78 Type V8 3
4 Type 8
5 Dimensions V78 d DN Zoll L L I H h D PVC-U cement PP/PVDF fusion PVDF-HP / PP buttfusion BCF / IR mm mm Inch mm mm mm mm mm mm 6 0 3/8" /" /" " /" /" V8 d DN Zoll D h H L L L L PVC-U cement PVDF-HP / PP buttfusion BCF / IR PP/ PVDF PP/PVDF fusion PP/ PVDF mm mm Inch mm mm mm mm mm mm mm 6 0 3/8" /" /" " /" /" " /" " "
6 V8 d DN Zoll D h H L L L L PVC-U cement PVDF-HP/PP buttfusion PP / PVDF PP / PVDF PP/ PVDF fusion BCF / IR mm mm Inch mm mm mm mm mm mm mm 6 0 3/8" /" /" " /" /" Specifications Pressure ranges for all pressure regulating valves shall be the following: DN 0 50 from 0 up to max. 0 bar DN from 0 up to max. 6 bar DN 00 from 0 up to max. bar Following types and sizes shall be available: compact Pressure Reducing Valve with an integrated manometer, sizes DN 0-00 mm (V8) compact Pressure Reducing Valve offering easy adjustment and real time visual control of the actual pressure reduction on the integrated manometer, sizes DN 0-0 mm (V8) compact Pressure Reducing Valve, offering an easy adjustment, excellent flow rate and very low hysteresis, sizes DN 0-0 mm (V78) Planning Fundamentals The following link will lead you to the Georg Fischer Planning Fundamentals. These detailed documents will support you by choosing the right valve for your application. 6
Pressure Reducing Valve V782
Pressure Reducing Valve V General Function The V Pressure Reducing Valve reduces the pressure within the system to a pre-set value. By using the differential pressure, the pressure reducing valve adjusts
More informationDiaphragm valve, Plastic
Diaphragm valve, Plastic Construction The GEMÜ manually operated 2/2-way diaphragm valve has a low maintenance plastic bonnet. An optical position indicator is integrated as standard. Features Suitable
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way valve has a low maintenance piston actuator which can be controlled by inert gaseous media. It has an integral optical position
More informationN086, N186, N786. Pressure retaining valve, Plastic
Pressure retaining valve, Plastic Construction The GEMÜ N086, N186 and N786 pressure retaining valves are used to provide a constant back pressure in process plant. If the inlet pressure rises above a
More information600, 630. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance plastic piston actuator which can be controlled by inert gaseous media. Normally Closed,
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The pneumatically operated 2/2 way diaphragm valve GEMÜ is a corrosionresistant all plastic construction. It has a maintenancefree piston actuator which can be controlled
More informationR677. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically
More informationDiaphragm Valve MV 310
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Application chemical plants water treatment Utilisation
More informationGEMÜ 205 Electrically operated solenoid valve
Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationR690. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ diaphragm valve has a low maintenance membrane actuator which can be controlled by air or inert gases. Normally Closed (NC), Normally Open (NO) and Double
More information3 way ball valve S4 hand operated
General: Symbolfoto Material: PVC-U / PP / PVDF Sealing material: EPDM / FPM Ball seating joint: PTFE Ball: T- oder L-Bohrung Dimensions: DN0 (DN5 / d6 / d/8 ) DN5 d0 d/ DN0 (DN5 / d5 / d/4 ) DN5 d d DN
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationDiaphragm Valve, Plastic 2/2 way, motorized
Diaphragm Valve, Plastic / way, motorized Construction Maintenancefree electric actuator Maintenancefree toothed belt drive Reversible synchronous motor Manual override Optical position indicator Features
More informationDiaphragm valve T4 [hand operated]
Praher Kunststofftechnik GmbH DB/EV/DEEN/4/0/95A Subject to technical modifications! General: Body material: Seals: Diaphragm: Dimensions: Connections: -U, PP, PVDF EPDM, FPM EPDM, EPDM/PTFE DN5 DN5 d0
More informationType 543. Three-way Ball Valve
Three-way Ball Valve Type 543 General Size: ⅜ 2 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged,
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationType 561/562 Cone Check Valve
Type 561/562 Cone Check Valve Standard Features Size 3/8 4 Material Body: PVC, CPVC, PROGEF Standard, Polypropylene, SYGEF PVDF, ABS Spring (562 only): Stainless Steel Optional: Nimonic C/Hastelloy C,
More informationGeorge Fischer Zero Static Valve Type 319 and 319-HTR
Diaphragm Valves George Fischer Zero Static Valve Type 39 and 39-HTR The Type 39 Zero Static Valve is ideally suited to eliminate dead legs in ultrapure water systems. Ergonomic, snap-on handwheel easy
More informationModular valve block MVB 100/200
Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution
More informationStrainer SF 305. Sealing FPM EPDM
Strainer SF 05 dvantage corrosion resistant transparent version (transparent PVC) for visual control of the degree of soiling easy to maintain pplication chemical plants industrial plants water treatment
More informationAngle Seat Valve SV 300
Angle Seat Valve SV 00 Advantage corrosion resistant maintenance-free good control characteristics metal-free Application chemical plants industrial plants water treatment Utilisation for shut-off and
More information2 way ball valve S4 with pneumatic actuator
General: Material: Sealing material: Ball seating joint: Dimensions: PVC-U / PP / PVDF EPDM / FPM PTFE DN0 DN80 d6 d0 3/8 4 symbol photo PVC Solvent socket Solvent spigot Threaded socket Fixed flange Backing
More informationCorrosion Resistant and Ultra-Pure Rotameters for Accurate Measurement of Liquids and Gases
Corrosion Resistant and Ultra-Pure Rotameters for Accurate Measurement of Liquids and Gases Rotameters Markets/Applications George Fischer rotameters are ideally suited for a multitude of corrosive and
More informationGeorge Fischer Pneumatically Actuated Diaphragm Valve DIASTAR Type 025/028
George Fischer Pneumatically Actuated Diaphragm Valve DIASTAR Type /8 Diaphragm Valves - Pneumatic º All-plastic actuator made of PP-GF º Compact design º Lightweight º Comprehensive line of accessories
More informationDiaphragm pressure gauge guard MDM 902 corrosion-free pressure transmission for aggressive media
Diaphragm pressure gauge guard MDM 902 corrosionfree pressure transmission for aggressive media Application chemical plants electroplating plants Utilisation for corrosionfree pressure transmission between
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
More information+GF+ PNEUMATIC ACTUATED BALL VALVE +GF+ PNEUMATIC ACTUATED BALL VALVE +GF+ PNEUMATIC ACTUATED BALL VALVE 3-16
+GF+ PNEUMATIC ACTUATED BALL VALVE Type 21/2 2-way True Union Pneumatically actuated ball valve for aggressive fluids and industrial applications. Based on the new Type 546 ball valve, the Type 21-2 uses
More informationBall Valve C 110. PVC-U PP PVDF - wafer flange socket end DIN-flange. Ball. Advantages. Ball seat. Application. Sealings. Utilisation.
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Ball Valve C 110 PVC-U PP PVDF - wafer flange
More informationDiaphragm valve MV 309
Diaphragm valve MV 309 Nominal size DN 15 32 Nominal size 1/2 1 1/4 Pressure PN 6 bar Features pneumatic diaphragm valve DN 15 32 compact piston drive for medium pressure up to 6 bar (PTFE diaphragms)
More informationGEMÜ R680 Motorized diaphragm valve
Motorized diaphragm valve Features Standard integral optical position indicator Optional flow direction and installation position Insensitive to particulate media Motorized alternative for applications
More information2 way ball valve S4 with integrated Praher Labeling System
Praher Plastics Austria GmbH DB/EN/DEEN///33 Technische Änderungen vorbehalten! way ball valve S4 Symbol photo Safety locking handle system This document does not constitute a guarantee, it is for initial
More informationDistributed By Aetna Plastics Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General Size: ½ 2 Material: PVC, CP
Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM,
More informationPNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
More information485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
More informationFlowmeter DFM
Flowmeter DFM 165 50 Nominal size DN 10-65 Nominal size /8 2 1/2 Nominal pressure PN 10 bar Features Measuring range to 50,000 l/h suitable for a wide range of applications for gaseous medium types, water,
More informationi butt weld spigot i flanged end acc. to DIN PN 10 / 16
body material PVC-U PVC-C PP PVDF ball seat PTFE other seats iepdm ifpm i *) working temperature 0 C to 50 C 0 C to 90 C -20 C to 80 C nominal size DN to DN connection with pipe legth acc. to EN 558-1
More informationType Electrically Actuated Ball Valve
GF Piping Systems Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement
More informationINSERTION Adaptor for analysis
INSERTION Adaptor for analysis Type can be combined with... Universal adaptor for type 8202 and 8222 ELEMENT s in pure, aggressive or contaminated liquids Adaptation into standard piping systems or conversion
More informationDiaphragm Valve MV 309
Diaphragm Valve MV 309 Benefits compact designed pneumtically operated valve standard with visual position indicator common installation length air connections acc. to NAMUR Application chemical and industrial
More informationPressure relief valve
Pressure relief valve Operating manual Series DHV 712 Version BA-2015.10.20 EN Print-No. 300 510 TR MA DE Rev001 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 32602 Vlotho Germany Phone: +49 (0) 5733-799-0
More information2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50
/- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5
More informationType 514, 515, 517, 519
Diaphragm Valve Type 514, 5, 517, 519 General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM, NBR, PTFE/EPDM, PTFE/FPM,
More informationPressure relief valve DHV 718
Pressure relief valve DHV 78 Benefits diaphragm controlled pressure relief valve with piston guidance simple design, reliable function particularly suitable for oscillating pumps constant, frictionless
More informationKM-165, KM-185, KM-200 OVERVIEW. Flow Monitor & Flow Indicator. Features. Operation
Flow Monitor & Flow Indicator KM-165, KM-185, KM-200 OVERVIEW Operation Float measuring principle Application Cooling systems and cooling circuits Mechanical engineering Pharmaceutical industry Chemical
More informationType 375. True Union Ball Valve
True Union Ball Valve Type 3 General Size: ⅜ 4 Material: PVC, CORZAN CPVC, or PPn Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged, PPro-Seal electrofusion socket
More informationRotameters Rotameters
Rotameters Type 807 Rotameter - Polyamie omplete Assembly PV Socket Ens, EPDM Seals, Stanar Tube Stanar Float 98 807 622 ^ 98 807 60 ^ 0.22-2.20 98 807 62 ^ 98 807 6 ^ 0.44-4.40 2 98 807 624 ^ 98 807 62
More information2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
More informationCATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.
CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional
More informationTechnical Data. Flow Meter Schwertberg, Poneggenstr. 5 Austria/Europe Fax +43/7262/ Tel.
Technical Data. Flow Meter. Tel. +43/7262/61179-0 4311 Schwertberg, Poneggenstr. 5 Austria/Europe info@praher-valves.com Fax +43/7262/61203 Float-type flow meter Float-type flow meter DN Inches da Measuring
More informationBall valve C 200 PROP / C 200 DOS
Ball valve C 00 PROP / C 00 DOS Additional options on request Silicone free www.asv-stuebbe.com/products/instrumentation PVC-U PP PVDF Nominal size DN 0 50 Nominal size /8 Nominal pressure PN 0 6 bar C
More informationSIGNET Vortex Flow Sensors ENGLISH
DN X DN X DN X DN X DN X DN X DN X SIGNET Vortex Flow Sensors ENGLISH 37000.090 C12/00 English 1. Mounting Location... 1 2. Installation... 1 3. Wiring Preparation... 2 4. Wiring Options Frequency Output
More informationLock it in with IPEX DK Series Dialock. Diaphragm Valves. IPEX DK Series Dialock Diaphragm Valve VALVE AVAILABILITY
IPEX DK Series Dialock Diaphragm Valve Lock it in with IPEX DK Series Dialock Diaphragm Valves IPEX is pleased to introduce our new DK Series Dialock Diaphragm Valves, available in manual and pneumatically
More informationPressure relief valve DHV 712-R set range: 0,3-10,0 bar
Pressure relief valve DHV 7R set range: 0,3 0,0 bar Benefits pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level of
More informationWafer check valve RSK 500
Wafer check valve RSK 00 Advantage corrosion resistant simple installation as a wafer type flange fitting centring of the valve by the housing diameter body with O-ring, no additional flange s required
More informationSolenoid Valve, Plastic
Solenoid Valve, Plastic Construction The EMÜ directly controlled 2/2-way plastic solenoid valve has a high performance coil which is hermetically separated from the medium by means of a flexible PTFE bush.
More informationPressure Regulating Valves Product Guide
Pressure Regulating Valves Product Guide Table of Contents Pressure Regulating Valves Pressure Reducing: Standard (V182/82)...6 Pressure Reducing: High Performance (V782)... 11 Pressure Retaining: Standard
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
More informationType Electrically Actuated Ball Valve
Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement socket, threaded,
More informationdisplay on the wall or in a panel away from the inline sensor SE30 for easy meter reading.
Analogue Flow Rate Indicator, DN 15...; PN 1...16 Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a large
More informationSignet 7000/7001 Vortex Flow Sensors * *
DN X DN X DN X DN X DN X DN X DN X Signet 7000/7001 Vortex Flow Sensors *3-7000.090* 3-7000.090 Rev. F 10/05 English English 1. Mounting Location... 1 2. Installation... 1 3. Wiring Preparation... 2 4.
More informationBall Valves George Fischer Type 353, 354, 355 COLORO Ball Valves. Technical Features
Ball Valves George Fischer Type 5, 54, 55 COLORO Ball Valves The George Fischer Type 5, 54, and 55 plastic ball valves feature: monobloc structure provides high safety level: user cannot dissassemble or
More informationELADOS EMP IV E00 Diaphragm Pump type
ELADOS EMP IV E00 Diaphragm Pump type 01400 02100 Single phase motor with winding protection, standard Plastic external housing, metal internal housing High delivery capacity at low number of strokes Safety
More informationDK DN PP-H. DIALOCK 2-way diaphragm valve
DK DN 15 65 PP-H DIALOCK 2-way diaphragm valve DK DN 15 65 The DK DIALOCK diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
More information710, 717, 723. Ball Valve, Plastic
Ball Valve, Plastic Aufbau GEMÜ 710, 717 and 72 are 2/2 or /2-way plastic ball valves available in the sizes 1/2 to 2 (DN 8 to DN 50, GEMÜ 717 to DN 100). GEMÜ 710 has a corrosion resistant low maintenance
More informationMembranventil Kunststoff, DN Diaphragm Valve Plastic, DN GEMÜ 600 Antriebsgröße Code 2-4 Actuator size Code 2-4
Membranventil Kunststoff, DN - 50 Diaphragm Valve Plastic, DN - 50 DE GB ORIGINAL EINBAU- UND MONTAGEANLEITUNG INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS GEMÜ 600 Antriebsgröße Code -4 Actuator
More informationDiaphragm Valve MV pneumatic - with pneumatically directly controlled actuator
Diaphragm Valve MV 0 - pneumatic - with pneumatically directly controlled actuator Advantage good control characteristics DN 5 - DN 50 equipped as standard with visual position indicator and manual emergency
More informationpvc-c manual valves inch sizes manual valves inch sizes Spears True Union 2000 Industrial Ball Valve
pvc-c Spears True Union 2000 Industrial Ball Valve Description: In-line double union ball valve with lockable handle Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 6-10 bar All
More informationC 200 Modern Construction. Flexible Modular Design. Highest Safety.
Ball Valve Modern Construction. Flexible Modular Design. Highest Safety. The System At A Glance Ergonomic hand lever Position locking Safety Guard Double shaft seal with hand lever Intelligent interface
More informationDiaphragm seal with threaded connection Plastic version Model
Pressure Diaphragm seal with threaded connection Plastic version Model 99.31 WIKA data sheet DS 99. for further approvals see page 5 Applications For aggressive, corrosive or environmentally hazardous
More informationHigh Purity PVDF/PP Valves and Flowmeters
High Purity PVDF/PP Valves and Flowmeters Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Quality is important for us Your reliable partner Since 1988, GEMÜ has been an Industry
More informationSR50 Series Pressure Regulating (Reducing) Valves
PDF Published July 7, SR5 Series Pressure Regulating (Reducing) Valves The Chemline SR 5 Series Pressure Regulating (Reducing) valves maintains a set downstream pressure independent of higher variable
More informationAdvanced PE Single Wall Piping System
Advanced PE Single Wall Piping System 8 - Specification Black Polyethylene (Advanced PE) Piping System REV:IN0512PE Materials: Pipe Production: ASTM D3350 cell classification PE445584C. Resin shall comply
More information+GF+ 546 Double Union Ball Valves
71 PRICE LIST 1 May 2018 Plastic Systems offers the broadest range of high quality thermoplastic valves available from stock in New Zealand. These valves are ideally suited for chemical handling and other
More informationGEMÜ 717 Manually operated ball valve
Manually operated ball valve Features igh flow rates Low weight Choice of various body materials and connection types vailable as shut off or control valve / and /way versions available Description The
More informationVA Air Release Valves Submittal Data Sheet. Job or Customer: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: introduction
Submittal Data Sheet Job or Customer: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: Date Date Date introduction < STANDARDS > IPEX VA Air Release Valves are of a unique design,
More informationDiaphragm Pumps for Air, Gases and Vapours LABOPORT Mini Diaphragm Vacuum Pumps and Compressors
Data Sheet E 1 LABOPORT Mini Diaphragm Vacuum Pumps and Compressors Series LABOPORT N 8 K_.18 Pumps Technical features: 1% oil-free transfer Pure transferring, evacuation and compression of gases Version
More information3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
More informationHygienic butterfly valves VZFB
Product range overview Version Type Based on standard Nominal width DN Process valve nominal pressure PN With clamp CC VZFB-A ASME BPE 1 10 4 1½ 2 2½ 3 4 Page With welded end WW VZFB-D DIN 11851 DN25 10
More information611, 671. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features
More informationFlowmeter, Plastic 805 / 807 / 815 / / 825 / 832 / 835. Sectional drawing
Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in TrogamidT, suitable for inert media, and polysulfone, suitable for corrosive*
More informationWafer check valve RSK 500
Wafer check valve RSK 00 Advantage corrosion resistant simple installation as a wafer type flange fitting centring of the valve by the housing diameter body with O-ring, no additional flange s required
More informationProbe holders for analytical probes
Probe holders for analytical probes For many different types of installations and applications Large range of probe holders General purpose, water treatment, food & beverage, pharmaceutical applications
More informationExploded views of the liquid ends
Liquid ends Sigma/ 2 Liquid end Sigma/ 2 130-DN 1 and 30-DN 2 PVT 1 2 3 6 4 P_SI_0024 Fig. 1: Liquid end Sigma/ 2 130-DN 1 and 30-DN 2 PVT Pos. Description Type 1600, 16090, Type 0430, 07120, 07220 1 Spring
More informationmanual valves inch sizes
Spears True Union 2000 Industrial Vented Ball Valve Description: In-line double union ball valve Maximum Fluid Pressure at 20 C: All sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 4-10 bar; all sizes flanged
More informationManual & Actuated Valves
GF Piping Systems Manual & Actuated Valves Technical Catalogue Issue 1 General Information The best choice Corrosion and chemical resistant products, systems and complete solutions from GF Piping Systems
More informationSilverLine S647, S660, S670. Diaphragm Valves, Plastic/Metal
Diaphragm Valves, Plastic/Metal Construction GEMÜ SilverLine is a range of simple yet robust plastic and metal diaphragm valves for the control of liquids and gases. Valve bodies are available in PVC-U,
More informationINSERTION flow sensor for continuous flow measurement
INSERTION flow sensor for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN)
More informationFlow-rate curves for diaphragm valves Type 2730 plastic, 2731 forged, 2731 cast, 2731 GP cold formed pipe valve body
Flow-rate curves for diaphragm valves Page 1/12 In this documentation fl ow characteristics for the Bürkert diaphragm valves 273 and 2731 are given. These characteristics were determined with a pressure
More information611, 671. Diaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic
More informationPipe Nipples / Solvent Cement / Pipe Clips 11. Diaphragm Valves / Knife Gate Valves 21
TABLE OF CONTENTS Pipe Sizing 1 Pipe 2 Tee s 3 Elbows 4 Couplings 5 Adaptors, Caps & Plugs 6 Unions 7 Reducer Bushing 8 Wye s / Clamp on Saddles 9 Flanges 10 Pipe Nipples / Solvent Cement / Pipe Clips
More informationRotameters. Variable Area Flow Meters
Variable Area Flow Meters Rotameters General Size: ⅜ 2½ Total Flow Range:. 264 gpm Tube Material: PA, PSU, PVC transparent Seal: EPDM, FPM Float: PVDF, PVDF-HP transparent En Connection: Solvent cement
More informationSolenoid valve type 150 direct action
Solenoid valve type 50 direct action Function closed when deenergized (NC) direct action Valve Function Switching function NC: In the position of rest, the valve is closed by the spring force. When energized
More informationBall Valve C 200. Stem PVC-U PVDF PP, fiberglass-reinforced. Ball PVC-U PP PVDF. Ball Seat PTFE. Application chemical and industrial plants
Ball Valve C 00 Benefits Highend industrial valve Flexible toolbox with a broad range of product varieties Reliable material combination for safe handling of critical media Newly designed ergonomic handle
More informationDK AND DK/CP DN 15 65
DK AND DK/CP DN 15 65 New diaphragm valves with maximised flow rate available in manual or pneumatically actuated versions. Manual versions are equipped with the innovative DIALOCK lockable handwheel.
More informationGEORGE FISCHER. Solenoid Valves. General Information. Product Features
Solenoid Valves General Information Solenoid valves from George Fischer play a major role in industrial systems engineering due to their outstanding quality. The comprehensive range a large number of different
More informationControl Valve, Plastic/Metal
Control Valve, Plastic/Metal Construction The GEMÜ 2/2-way control valve has a stainless steel piston actuator. ll metallic actuator components are made of stainless steel. It is available with a normally
More information