Ball valve C 200 PROP / C 200 DOS
|
|
- Amanda Conley
- 5 years ago
- Views:
Transcription
1 Ball valve C 00 PROP / C 00 DOS Additional options on request Silicone free PVC-U PP PVDF Nominal size DN 0 50 Nominal size /8 Nominal pressure PN 0 6 bar C 00 PROP Characteristics C 00 PROP Proportional ball valve based on the C 00 Reproducible settings by means of 90 scale disk Patented ball geometry with proportional characteristic curve (linearised connection of flow quantity and opening angle) Economic alternative for diaphragm valves Simple automation using electric variable speed actuators Reproducible settings by means of 90 scale disk / scale division 5 Flow rate max. 5,000 l/h (DN 50) Characteristics C 00 DOS Dosing ball valve based on the C 00 Finely adjustable using 80 opening angle Reproducible settings by means of 80 scale disk / scale division 5 Simple automation using electric variable speed actuators Flow rate max.,000 l/h (DN 5) Nominal size DN 0 5 Nominal size /8 Nominal pressure PN 0 6 bar C 00 DOS
2 Pictograph Ball valve C 00 PROP Options Makes: Valpes l (J&J) Wide-range voltage ranges: 5 0 V AC/DC V AC/DC Heating Failsafe manual electric Actuator PVC-U PP PVDF Connection Seal EPDM FPM Socket Thread Spigot Thread Flange C 00 PROP Basic nominal diameters: DN 8 DN 0 DN 5 DN 0 DN 5 DN DN 40 DN 50 DN 65 DN 80 DN 00 DN 5 DN 50 DN 00 DN 50 DN 00 DN 50 DN 400 available not available On request» silicone free Connection material (pipe connection) PVC-U socket DIN* Socket ANSI, BS, JIS Female thread Rp.457 female thread Rp Male thread R.040 female thread Rp Male thread R PP PVDF * incl. DN 0 socket DIN* Female thread Rp socket DIN* PE PP PE spigot (90 mm) spigot IR spigot (90 mm) PVDF spigot IR PP/St. flange ANSI GFK flange DIN PP/St. flange DIN, ANSI
3 Pictograph Ball valve C 00 DOS Options Makes: Valpes l (J&J) Wide-range voltage ranges: 5 0 V AC/DC V AC/DC Heating Failsafe manual electric Actuator PVC-U PP PVDF Connection Seal EPDM FPM Socket Thread Spigot Thread Flange C 00 DOS Basic nominal diameters: DN 8 DN 0 DN 5 DN 0 DN 5 DN DN 40 DN 50 DN 65 DN 80 DN 00 DN 5 DN 50 DN 00 DN 50 DN 00 DN 50 DN 400 available not available On request» silicone free Connection material (pipe connection) PVC-U socket DIN* Socket ANSI, BS, JIS Female thread Rp.457 female thread Rp Male thread R.040 female thread Rp Male thread R PP PVDF * incl. DN 0 socket DIN* Female thread Rp socket DIN* PE PP PE spigot (90 mm) spigot IR spigot (90 mm) PVDF spigot IR PP/st. flange ANSI GFR flange DIN PP/st. flange DIN, ANSI
4 Ball valve C 00 PROP / C 00 DOS Use Chemical and industrial plant engineering Application Proportional ball valve C 00 PROP: For precise and reproducible dosing of neutral or aggressive fluids free of solid particles for medium-strength volume flows for dosing applications with high linearity demands as an alternative for diaphragm valves manual or electric automation Dosing ball valve C 00 DOS For precise and reproducible dosing of neutral or aggressive fluids free of solid particles for low-strength volume flows and high dosing accuracy manual or electric automation Testing Requirements and testing according to DIN EN ISO 65 and ISO 99 Leakage rate A tested according to DIN EN 66 Flow medium Neutral and aggressive fluid or gaseous media free of solid particles, provided that the valve components coming into contact with the media are resistant at the operating temperature in accordance with the ASV resistance guide. Flow direction marked with arrow on the housing ASV resistance guide Process temperature see pressure/temperature diagram Process pressure see pressure/temperature diagram Nominal pressure (H O, 0 C) PN 0 6 bar Size C 00 PROP: DN 0 50 C 00 DOS: DN 0 5 Actuation manual: with hand lever electric: with electric variable speed actuator, DIN EN ISO 5 (additional option) Connection Union nut with connection thread suitable for plastic materials Material with medium contact Housing: PVC-U, PP, PVDF Ball: PVC-U, PP, PVDF Ball pivot: PVC-U, PP glass fibre reinforced, PVDF Ball seal: PTFE Sealing element, O-ring: FPM, EPDM Material without medium contact Hand lever, scale disc: ASA Fastening via two threaded inserts (Ensate inserts) in the mounting base Mounting position any; however, observe the flow direction Basic valve colour Housing: PVC-U, grey, RAL 70 Housing: PP, grey, RAL 70 Housing: PVDF, opaque, yellowish-white Hand lever: black, RAL 9005 Hand lever inlay: orange, RAL 004 Scale disc: orange, RAL 004 Device connection see pictograph Additional options Electric variable speed actuator Valpes Electric variable speed actuator JJ Accessories Retrofitting set for automatic valves 4
5 Ball valve C 00 PROP / C 00 DOS Pressure/temperature diagram The pressure/temperature limits of the materials are valid for the stated nominal pressures and a service life of 5 years. These values are guide values for flow medium types which do not negatively impact the physical and chemical characteristics of the valve material. It may be necessary to take diminution factors into consideration. The operating life of the wear parts depends on the conditions of use. P T Operating pressure Temperature 5
6 Ball valve C 00 PROP / C 00 DOS Flow Q at delta p bar C 00 PROP DN DN 40 Q (l/h) DN DN 5 DN 0 DN x ( ) C 00 DOS DN5 000 DN0 Q (l/h) DN x ( ) Q X Flow Scale graduation 6
7 Ball valve C 00 PROP / C 00 DOS with hand lever with hand lever Connection, PE spigot/socket d d h H h H M M Connection, PP-(PVDF-)spigot/ flange Connection female thread/ male thread D Rp h H L L L v L L L L E L L L v E E d b R D K D Basic valve dimensions d (mm) DN (mm) DN (inch) / /4 /4 / Dimension Housing material Union end variant b PVDF PP/St. flange DIN PP / PVC-U GFR flange DIN PP / PVC-U / PVDF PP/St. flange ANSI d PVDF PP/St. flange DIN PP / PVC-U GFR flange DIN PP / PVC-U / PVDF PP/St. flange ANSI D PVDF PP/St. flange DIN PP / PVC-U GFR flange DIN PP / PVC-U / PVDF PP/St. flange ANSI D PP / PVC-U / PVDF E h H PP / PVC-U / PVDF K PVDF PP/St. flange DIN PP / PVC-U GFR flange DIN PP / PVC-U / PVDF PP/St. flange ANSI L PP / PVC-U / PVDF PP/St. flange DIN/ANSI GFR flange DIN L PVDF PVDF spigot PP PP spigot PE spigot PVC-U PE spigot Male thread R,457 /, L PVDF PP PVC-U L PVDF PVDF socket DIN PP PP socket DIN PP female thread Rp PVC-U PVC-U socket DIN PVC-U socket ANSI PVC-U socket BS PVC-U socket JIS PVC-U female thread Rp ,457/,040- Female thread Rp M PP / PVC-U / PVDF M5 M5 M6 M8 M8 M8 R,457/,040- Male thread R Rp,457/,040/PP/PVC-U- Female thread Rp / /4 /4 / / /4 /4 / v PP / PVC-U / PVDF v M 7
8 Additional options Ball valve C 00 PROP / C 00 DOS Electric variable speed actuator with basic valve Variable speed actuator Valpes N N Dimensions, variable speed actuator Valpes d (mm) DN (mm) DN (inch) /8 / /4 /4 / h h H N N O H h O Dimensions, variable speed actuator J&J d (mm) DN (mm) DN (inch) /8 / /4 /4 / h h H N N O N N O h h H h Note Variable speed actuator J&J Electric actuators may not be installed in an over-head position! 8
9 Additional options Ball valve C 00 PROP / C 00 DOS Electric variable speed actuator Valpes Technical data Manufacturer: Valpes ER ER 0 Plus incl. heater, extendible Actuator type Low voltage Mains voltage Torque (Nm) 0 0 Voltage AC (V) Voltage DC (V) Manipulating time (s) Setting angle ( ) Power consumption (W) 5 5 Weight (kg) Duty cycle (%) Protection type (IP) Temperature ( C) Heating Included Included Options Fail-Safe/rechargeable battery pack Fail-Safe/rechargeable battery pack Variable speed actuator Variable speed actuator Variable speed actuator 9
10 Additional options Ball valve C 00 PROP / C 00 DOS Electric variable speed actuator Valpes Wiring diagram Manufacturer: Valpes ER Connection A Voltage supply Connection B Feedback, switch N - TP/PE L FC0 FCF FC FC FC FC FC FC 5V-0V 50/60Hz (V-48V DC) 00V-40V 50/60Hz (00V-50V DC) TP/PE ~ ~ SNAA P6 POSI SNAA mA / 4-0mA / 0-0V Connection B Actual value/set-point value current loop Connection A: Voltage supply Connection B: Feedback, switch A Voltage supply AC/DC Connection of the neutral conductor (N/AC) / Minus ( /DC) Connection of the phase / Plus (L/) Connection B: Actual value/set-point value current loop B Actual value/set-point value current loop 0 0 ma / 4 0 ma / 0 0 V Feedback / Actual value () ma / 4 0 ma / 0 0 V Feedback / Actual value ( ) ma / 4 0 ma / 0 0 V Set-point value ( ) ma / 4 0 ma / 0 0 V Set-point value () B Feedback FC Limit switch, valve»open«fc Limit switch, valve»closed«m Motor 4 FC COM 5 FC (NO) 6 FC COM 7 FC (NO) 8 FC (NC) 9 FC (NC) 0
11 Additional options Ball valve C 00 PROP / C 00 DOS Electric variable speed actuator J&J Technical data Manufacturer: J&J J incl. heater, extendible Actuator type Low voltage Mains voltage Torque (Nm) 0 0 Voltage AC (V) Voltage DC (V) Manipulating time (s) Setting angle ( ) Power consumption (W) 6 0V 9W; 0V 44W Weight (kg).8.8 Duty cycle (%) Protection type (IP) Temperature ( C) Heating Yes Yes Options Fail-Safe/rechargeable battery pack Fail-Safe/rechargeable battery pack Variable speed actuator Variable speed actuator Variable speed actuator
12 Additional options Ball valve C 00 PROP / C 00 DOS Electric variable speed actuator J&J Wiring diagram Manufacturer: J&J ST ST ST4 N - VAC/VDC L Modell H/L 0 Voltage supply Control signal connection Limit switches external Ausgang/Output Eingang/Input L Zu/Close Ausgang/Output L L Auf/Open Limit switches internal ST ST ST4 ST4 COM COM Eingang/Input - Voltage supply AC/DC Connection of the neutral conductor (N/AC) / Minus ( /DC) Connection of the phase / Plus (L/) Limit switches Connection of the voltage input COM (/L) Connection of the limit switch output (/L)»CLOSED«Connection of the limit switch output (/L)»OPEN«Control signal connection Connection Minus ( ) 4 0 ma / 0 0 V Input set-point value () 4 0 ma / 0 0 V Output Feedback / actual value ()
13 Ball valve C 00 PROP / C 00 DOS Basic valve with hand lever, connection socket Electric variable speed actuator Valpes / J&J with basic valve Position Quantity Designation Housing Ball DOS Ball PROP 4 Ball pivot 5 Union threaded neck 6 Hand lever 7 Union end 8 Union nut 9 Ball seat 0 O-ring O-ring O-ring O-ring 4 Ball seat 5 Locking slide 6 Hand lever inlay 7 Scale disc PROP 8 Scale disc DOS Position Quantity Designation Ball valve Mounting box, bottom section Mounting box, top section 5 Electric actuator 6 Drive adapter
Modular valve block MVB 100/200
Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution
More informationDiaphragm valve MV 309
Diaphragm valve MV 309 Nominal size DN 15 32 Nominal size 1/2 1 1/4 Pressure PN 6 bar Features pneumatic diaphragm valve DN 15 32 compact piston drive for medium pressure up to 6 bar (PTFE diaphragms)
More informationBall valve C 16. Nominal size DN Nominal size 2 6 Nominal pressure PN 6 10 bar.
Ball valve C 16 Nominal size DN 50 150 Nominal size 2 6 Nominal pressure PN 6 10 bar Features Special ball valve with fully encapsulated valve ball extremely low clearance volume high actuation reliability
More informationBall Valve C 200. Stem PVC-U PVDF PP, fiberglass-reinforced. Ball PVC-U PP PVDF. Ball Seat PTFE. Application chemical and industrial plants
Ball Valve C 00 Benefits Highend industrial valve Flexible toolbox with a broad range of product varieties Reliable material combination for safe handling of critical media Newly designed ergonomic handle
More informationBall Valve C 200. Stem PVC-U PVDF PP, fiberglass-reinforced. Ball PVC-U PP PVDF. Ball Seat PTFE. Application chemical and industrial plants
Ball Valve C 00 Benefits Highend industrial valve Flexible toolbox with a broad range of product varieties Reliable material combination for safe handling of critical media Newly designed ergonomic handle
More informationC 200 Modern Construction. Flexible Modular Design. Highest Safety.
Ball Valve Modern Construction. Flexible Modular Design. Highest Safety. The System At A Glance Ergonomic hand lever Position locking Safety Guard Double shaft seal with hand lever Intelligent interface
More informationBall Valve C 110. PVC-U PP PVDF - wafer flange socket end DIN-flange. Ball. Advantages. Ball seat. Application. Sealings. Utilisation.
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Ball Valve C 110 PVC-U PP PVDF - wafer flange
More informationFlowmeter DFM
Flowmeter DFM 165 50 Nominal size DN 10-65 Nominal size /8 2 1/2 Nominal pressure PN 10 bar Features Measuring range to 50,000 l/h suitable for a wide range of applications for gaseous medium types, water,
More informationPressure relief valve DHV 718
Pressure relief valve DHV 78 Benefits diaphragm controlled pressure relief valve with piston guidance simple design, reliable function particularly suitable for oscillating pumps constant, frictionless
More informationDiaphragm Valve MV 310
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Application chemical plants water treatment Utilisation
More informationDiaphragm Valve MV pneumatic - with pneumatically directly controlled actuator
Diaphragm Valve MV 0 - pneumatic - with pneumatically directly controlled actuator Advantage good control characteristics DN 5 - DN 50 equipped as standard with visual position indicator and manual emergency
More informationBall valve C 100 multi-part, high k v value, high stability
Ball valve C 00 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable and ball
More informationBall valve C 10 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C 0 valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and cannot be flushed
More informationAngle Seat Valve SV 300
Angle Seat Valve SV 00 Advantage corrosion resistant maintenance-free good control characteristics metal-free Application chemical plants industrial plants water treatment Utilisation for shut-off and
More informationBall valve C 100 multi-part, high k v value, high stability
Ball valve C 100 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable ball seat
More informationBall valve C 100 multi-part, high k v value, high stability
Ball valve C 00 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable and ball
More informationDiaphragm Valve MV 309
Diaphragm Valve MV 309 Benefits compact designed pneumtically operated valve standard with visual position indicator common installation length air connections acc. to NAMUR Application chemical and industrial
More informationWafer check valve RSK 500
Wafer check valve RSK 00 Advantage corrosion resistant simple installation as a wafer type flange fitting centring of the valve by the housing diameter body with O-ring, no additional flange s required
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationDiaphragm pressure gauge guard MDM 902 corrosion-free pressure transmission for aggressive media
Diaphragm pressure gauge guard MDM 902 corrosionfree pressure transmission for aggressive media Application chemical plants electroplating plants Utilisation for corrosionfree pressure transmission between
More informationPressure relief valve DHV 712-R set range: 0,3-10,0 bar
Pressure relief valve DHV 7R set range: 0,3 0,0 bar Benefits pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level of
More informationWafer check valve RSK 500
Wafer check valve RSK 00 Advantage corrosion resistant simple installation as a wafer type flange fitting centring of the valve by the housing diameter body with O-ring, no additional flange s required
More informationPressure Relief Valve Overflow Valve Type DHV 715 Type DHV 716 Type DHV 725
ASV Stübbe GmbH & Co. KG Hollwieser Straße D- Vlotho Fon + (). - Fax + (). - www.asv-stuebbe.de contact@asv-stuebbe.de Pressure Relief Valve Overflow Valve Type DHV Type DHV Type DHV High repeating accuracy,
More informationGEMÜ R680 Motorized diaphragm valve
Motorized diaphragm valve Features Standard integral optical position indicator Optional flow direction and installation position Insensitive to particulate media Motorized alternative for applications
More informationButterfly Valve K 220 for application in the harsh environment of the chemical industry
Butterfly Valve K 220 for application in the harsh environment of the chemical industry Advantage DN 20 to DN 400 liner as a element liner makes additional flange seals superfluous cost efficient and direct
More information2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position
More informationStrainer SF 305. Sealing FPM EPDM
Strainer SF 05 dvantage corrosion resistant transparent version (transparent PVC) for visual control of the degree of soiling easy to maintain pplication chemical plants industrial plants water treatment
More informationR677. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically
More informationDiaphragm valve T4 [hand operated]
Praher Kunststofftechnik GmbH DB/EV/DEEN/4/0/95A Subject to technical modifications! General: Body material: Seals: Diaphragm: Dimensions: Connections: -U, PP, PVDF EPDM, FPM EPDM, EPDM/PTFE DN5 DN5 d0
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
More information485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationR690. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ diaphragm valve has a low maintenance membrane actuator which can be controlled by air or inert gases. Normally Closed (NC), Normally Open (NO) and Double
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationGEMÜ 717 Manually operated ball valve
Manually operated ball valve Features igh flow rates Low weight Choice of various body materials and connection types vailable as shut off or control valve / and /way versions available Description The
More information600, 630. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical
More informationThermoplastic Vertical Sump Pump Type ETL
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33.7 99-0 Fax +49 (0) 57 33.7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Thermoplastic Vertical Sump Pump Type ETL dry-running
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way valve has a low maintenance piston actuator which can be controlled by inert gaseous media. It has an integral optical position
More information710, 717, 723. Ball Valve, Plastic
Ball Valve, Plastic Aufbau GEMÜ 710, 717 and 72 are 2/2 or /2-way plastic ball valves available in the sizes 1/2 to 2 (DN 8 to DN 50, GEMÜ 717 to DN 100). GEMÜ 710 has a corrosion resistant low maintenance
More informationDiaphragm valve, Plastic
Diaphragm valve, Plastic Construction The GEMÜ manually operated 2/2-way diaphragm valve has a low maintenance plastic bonnet. An optical position indicator is integrated as standard. Features Suitable
More informationASV sturdy and robust construction. DN 10 up to DN bar (PN 10) at 20 C. DMV 755: 1,0-9,0 bar DMV 765: 0,5-9,0 bar
Pressure Reucing Valve Type DMV Type DMV Print-No. / Design Size Max. Pressure Setting Range Pressure Setting Working Pressure Back lash Operating Security Maintenance Simple inline pipe connection ASV
More informationPNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
More informationN086, N186, N786. Pressure retaining valve, Plastic
Pressure retaining valve, Plastic Construction The GEMÜ N086, N186 and N786 pressure retaining valves are used to provide a constant back pressure in process plant. If the inlet pressure rises above a
More informationFlowmeter, Plastic 805 / 807 / 815 / / 825 / 832 / 835. Sectional drawing
Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in TrogamidT, suitable for inert media, and polysulfone, suitable for corrosive*
More informationpvc-u section guide application guide standards and approvals
pvc-u Unplasticised Polyvinyl Chloride (PVC-U) is the most widely used of all plastics used for pipe installations. It is rigid, versatile, and is suitable for both above or below ground installations.
More informationCATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.
CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional
More informationVertical Sump Pump Type ETL
Vertical Sump Pump Type ETL»dry running safe«technical data Flow rate Q up to 220 m 3 /h Head H up to 55 m Submersion depth 500 or 750 mm Suction extension up to 1800 mm Materials limits of use PP up to
More informationPraher S4 Ball Valve. manual valves. Praher Type S4 Ball Valve. Materials. Size. Pressure Rating. Features. Connections.
Praher S4 Ball Valve Praher Type S4 Ball Valve Descripti: In-line double uni ball valve with lockable handle Mounting: In any positi Maximum Fluid Pressure at 20 C: s 16mm to 7mm - 10bar; s 90mm to 110mm
More informationGEMÜ 205 Electrically operated solenoid valve
Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator
More information2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
2/2-way ball valve with electric rotary actuator, ball valve in, N 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position indicator
More informationPressure Reducing Valve V782
Pressure Reducing Valve V General Function The V Pressure Reducing Valve reduces the pressure within the system to a pre-set value. By using the differential pressure, the pressure reducing valve adjusts
More informationFlowmeter, Plastic 855 / 857 / 865 / / 875 / 880 / 885
Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in TrogamidT, suitable for inert media, and, suitable for corrosive* media
More informationDiaphragm Valve, Plastic 2/2 way, motorized
Diaphragm Valve, Plastic / way, motorized Construction Maintenancefree electric actuator Maintenancefree toothed belt drive Reversible synchronous motor Manual override Optical position indicator Features
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance plastic piston actuator which can be controlled by inert gaseous media. Normally Closed,
More information2 way ball valve S4 with integrated Praher Labeling System
Praher Plastics Austria GmbH DB/EN/DEEN///33 Technische Änderungen vorbehalten! way ball valve S4 Symbol photo Safety locking handle system This document does not constitute a guarantee, it is for initial
More informationUltrasonic filling level sensor UFM 200 / 600 C2 / C4 / R / MD
Ultrasonic filling level sensor UFM 200 / 600 C2 / C4 / R / MD Features UFM 600 up to 6 metres UFM 200 up to 2 metres for distance, volume and filling level measurement for containers, open basins or channels
More information3 way ball valve S4 hand operated
General: Symbolfoto Material: PVC-U / PP / PVDF Sealing material: EPDM / FPM Ball seating joint: PTFE Ball: T- oder L-Bohrung Dimensions: DN0 (DN5 / d6 / d/8 ) DN5 d0 d/ DN0 (DN5 / d5 / d/4 ) DN5 d d DN
More informationdisplay on the wall or in a panel away from the inline sensor SE30 for easy meter reading.
Analogue Flow Rate Indicator, DN 15...; PN 1...16 Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a large
More information2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
More informationSolenoid valve type 150 direct action
Solenoid valve type 50 direct action Function closed when deenergized (NC) direct action Valve Function Switching function NC: In the position of rest, the valve is closed by the spring force. When energized
More informationDiaphragm seal with threaded connection Plastic version Model
Pressure Diaphragm seal with threaded connection Plastic version Model 99.31 WIKA data sheet DS 99. for further approvals see page 5 Applications For aggressive, corrosive or environmentally hazardous
More information/ 855 / 857 / 861 / / 870 / 875 / 880 / 885. Variable Area Flowmeter, Plastic
Variable Area Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in PA transparent or Polysulphone suitable for inert or corrosive*
More informationFlow-rate curves for diaphragm valves Type 2730 plastic, 2731 forged, 2731 cast, 2731 GP cold formed pipe valve body
Flow-rate curves for diaphragm valves Page 1/12 In this documentation fl ow characteristics for the Bürkert diaphragm valves 273 and 2731 are given. These characteristics were determined with a pressure
More informationDistributed By Aetna Plastics Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General Size: ½ 2 Material: PVC, CP
Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM,
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a reduction gear and cam. The
More informationINSERTION flow sensor for continuous flow measurement
INSERTION flow sensor for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN)
More informationType Electrically Actuated Ball Valve
GF Piping Systems Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement
More informationType Electrically Actuated Ball Valve
Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement socket, threaded,
More informationPressure Relief Valve Overflow Valve Type DHV 715 Type DHV 716 Type DHV 725
Pressure Relief Valve Overflow Valve Type DHV Type DHV Type DHV DIBt* approve DIBt* approve High repeating accuracy, with union sockets or spigot ens Print / The optimal monitoring valves Sizes up to Operating
More information2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50
/- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5
More informationELADOS EMP-KKS Diaphragm Piston Pump Type
Diaphragm Piston Pump Type 00002 00014 Metering with smallest possible rate capability High reproducibility High metering accuracy even with degassing products Self-priming and self-venting with smallest
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More informationVKD DN PP-H. DUAL BLOCK 2-way ball valve
VKD DN 65 100 PP-H DUAL BLOCK 2-way ball valve VKD DN 65 100 FIP has developed a VKD DUAL BLOCK ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball
More informationi butt weld spigot i flanged end acc. to DIN PN 10 / 16
body material PVC-U PVC-C PP PVDF ball seat PTFE other seats iepdm ifpm i *) working temperature 0 C to 50 C 0 C to 90 C -20 C to 80 C nominal size DN to DN connection with pipe legth acc. to EN 558-1
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The pneumatically operated 2/2 way diaphragm valve GEMÜ is a corrosionresistant all plastic construction. It has a maintenancefree piston actuator which can be controlled
More informationGEMÜ 710 Pneumatically operated ball valve
Pneumatically operated ball valve Features High flow rates Choice of various body materials and connection types Available as shut off or control valve / and /way versions available Description The / and/or
More informationFK DN PVC-U Butterfly valve
.co.th FK DN 40 300 PVC-U Butterfly valve FK DN 40 300 The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring
More informationDK AND DK/CP DN 15 65
DK AND DK/CP DN 15 65 New diaphragm valves with maximised flow rate available in manual or pneumatically actuated versions. Manual versions are equipped with the innovative DIALOCK lockable handwheel.
More informationOur vision is to be the first choice in the needs of our customers that we see as business partners and to serve without sacrificing quality.
Armflow Pump Technologies B.V. has been established to serve the related industries by producing various pumps, air blowers and chemical dosing pumps for use in air and fluid transfer in environmental
More informationpvc-c manual valves inch sizes manual valves inch sizes Spears True Union 2000 Industrial Ball Valve
pvc-c Spears True Union 2000 Industrial Ball Valve Description: In-line double union ball valve with lockable handle Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 6-10 bar All
More informationControl Valve, Metal. Options Versions according to ATEX for manual and pneumatic operation on request
Control Valve, Metal Construction The GEMÜ 2/2-way control valve has a body with an integrated control mechanism which can be controlled by various operator types. Features Suitable for inert and corrosive*
More informationType 543. Three-way Ball Valve
Three-way Ball Valve Type 543 General Size: ⅜ 2 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged,
More informationControl Valve, Plastic/Metal
Control Valve, Plastic/Metal Construction The GEMÜ 2/2-way control valve has a stainless steel piston actuator. ll metallic actuator components are made of stainless steel. It is available with a normally
More informationELADOS EMP II Diaphragm Pump Type V
ELADOS EMP II Diaphragm Pump Type V3014-00240 Mechanical stroke adjustment Stroke frequency regulation Pulse control Pulse multiplication and division Pulse storage Standard signal drive Empty signal report
More information+GF+ PNEUMATIC ACTUATED BALL VALVE +GF+ PNEUMATIC ACTUATED BALL VALVE +GF+ PNEUMATIC ACTUATED BALL VALVE 3-16
+GF+ PNEUMATIC ACTUATED BALL VALVE Type 21/2 2-way True Union Pneumatically actuated ball valve for aggressive fluids and industrial applications. Based on the new Type 546 ball valve, the Type 21-2 uses
More informationMotor Valve GS 3 series 1/2 up to 10
Motor Valve 8038 GS 3 series 1/2 up to 10 Fast and high resolution motorvalve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and for
More informationDatasheet Pressure Reducing Valves V782/V82/V182
Datasheet Pressure Reducing Valves V78/V8/V8 Advantages - No auxiliary energy is required to operate the valve - Small standard tolerances due to the large control surface and the spiral spring - Can also
More informationButterfly Valve, Metal
Butterfly Valve, Metal Construction The motorized GEMÜ 2/2 way butterfly valve has a low maintenance electrical actuator with a powerful reversible DC motor. The secondary gear in the motor, consisting
More informationManual & Actuated Valves
GF Piping Systems Manual & Actuated Valves Technical Catalogue Issue 1 General Information The best choice Corrosion and chemical resistant products, systems and complete solutions from GF Piping Systems
More informationintroduction VKD Series Automated Ball Valves Product Data Sheet < STANDARDS >
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2464 ASTM D2466 ASTM D2467 ASTM D4101 ASTM F1498 ASTM F437 ASTM F439 IPEX VKD Series Automated Ball Valves offer a variety of advanced features
More informationCEPEX PLASTIC VALVES EXTREME SERIES
CEPEX PLASTIC VALVES EXTREME SERIES Technical Product Presentation Cepex presentation Cepexis one of the leading European (Spanish) manufacturers of plastic valves and fittings. For more than 30 years
More informationmanual valves inch sizes
Spears True Union 2000 Industrial Vented Ball Valve Description: In-line double union ball valve Maximum Fluid Pressure at 20 C: All sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 4-10 bar; all sizes flanged
More informationGlobe Control Valves. Steady, safe and economic
Globe Control Valves Steady, safe and economic Exner valves have proven themselves in the field of process engineering for over 50 years. As early as the sixties, Exner developed the first globe control
More informationELADOS EMP III Diaphragm Pump type
ELADOS EMP III Diaphragm Pump type 00160-00540 Mechanical stroke adjustment Stroke frequency regulation Pulse control Pulse multiplication and division Pulse memory Standard signal control Empty signal
More informationTKD dn PP-H. Dual Block 3-way ball valve
TKD dn 15 50 PP-H Dual Block 3-way ball valve TKD DN 15 50 FIP has developed a VKD DUAL BLOCK ball valve to introduce a high reference standard in thermosplastic valve design. TKD is a True Union diverting
More informationRotary Plug Valve BR 23e
PTFE-lined Rotary Plug Valve BR 23e Application: PTFE-lined rotary plug valve for aggressive media, especially due to high demands in chemical plants: Nominal diameter: DN 25, DN 50, DN 80 and NPS1, 2,
More informationProduct bulletin for: ST2 Ball valves with two-way and three-way BSPP threaded fittings
Product bulletin for: ST2 Ball valves with two-way and three-way BSPP threaded fittings ST2 Ball valves in conjunction with spring return and non-spring return VA-Actuators Developed for HVAC applications
More information