Product sheet Mechspace Pro
Handle eccentric loads Easy to manoeuvre and smooth Mechspace Pro is pneumatic moment absor bing manipulator for loads up to 50 kg and a moment up to 500 Nm. Mechspace Pro is easy to manoeuvre and provides ergonomic freedom of movement within a large working area. Beneficial moment absorbing capacity The moment absorbing features gives important advantages for complex material handling operations, and for gripping and rotation of eccentric loads. Impressive reach and flexibility Mechspace Pro is the natural choice where the working reach is of high importance, as for example when the operator is working under a protruding roof, inside a vehicle or in a working area with restricted accessibility. Pillar-mounted Mechspace Pro 70P can also be equipped with a mobile footplate for easy repositioning by forklift truck. Several pneumatic versions Each type of material handling requires its pneumatic solution. Mechspace Pro is available in several standard versions: counterbalanced for or loads, or in a pilot control version for balancing of varying loads in combination with an external control unit. Standard vs. utomotive Mechspace Pro is available in two pneumatic variants. The standard version is the natural solution for material handling and lifting technique within the general industry. For more demanding environments where increased reliability is required, such as in assembly processes in the automotive industry, we offer a variant utomotive using impulse signals via bistable valves for load switching. Many areas of applications Typical application areas for Mechspace Pro is handling of components and various forms of assembly work in the manufacturing and automotive industries. Mechspace Pro is the natural choice where the working reach is of high importance, as for example when the operator is working under a protruding roof, inside a vehicle or in a working area with restricted accessibility.
Mechspace Pro 70P
Overview Mechspace Pro 70/70P/50/50P Technical data 70 / 70P 50 /50P Mechspace Pro Max load kg 70 50 Media air, non-lubr. (0 μm) Max moment Nm 500 500 Noice level <70 db () Stroke SL mm 900 50 Work temperature 5-0 C (indoor use) Max tare weight kg 00 /95 00 / 330 ir consumption l n /cycle 8 6 Work pressure bar 5 (-7) 6 (5-7) See load table To MS Pro: 0,0 μm, FRL unit is included Mechspace Pro 70 Mechspace Pro 70P See also Movomech s selection of gripper tool arms for Mechspace Pro. Mechspace Pro 50P Mechspace Pro 50
Pneumatics and load charts Balanced -weight Handling of one balanced load; with an external actuator the operator selects Load or Without load. Balanced 3-weight Handling of two balanced loads; with external actuator the operator selects Load, Load, or Without load. Pilot control (various loads) precise and smooth handling of various loads using an external control unit. load cell (parallelogram) is available as standard option. Slow speed function The -weight and 3-weight pneumatic versions can be equipped with a slow speed function for a controlled lowering motion. Functional conditions are configured by the customer, and depend on the specific application. utomotive (M) The load is switched by bistable valves, ie. load alternation is done by impulse signals. For more information, please contact Movomech. M max [Nm] Load table Max load depends on incoming work pressure according to: D [m] x [mm] Work pressure (bar) Max load (kg) 70/70P Max load (kg) 50/50P 5 5,5 6 7 50 60 65 70 70 00 50 50 50 50 Load diagram Mechspace Pro can work with loads within the shaded graphics area for each model. Max moment M max at tool adapter. m max [kg] Max load m max at the tool adapter: includes tool arm, gripper tool and handled object. Load [kg] 70 / 70P Load [kg] 50 / 50P Must not be exceeded! Must not be exceeded! D [m] D [m] Not recommended due to unpredictable dynamic loads. Contact Movomech for advice. Not recommended due to unpredictable dynamic loads. Contact Movomech for advice.
800 765 5 PH PH Ft 800 B 70 ( :0 ) B B 800 70 kg Max load 500 Nm Max moment 900 mm Stroke SL 0-330 Rotation 0-330 Front rotation 8 l n /cycle 3 ir consumption 5 (-7) bar Work pressure 0 μm Filtration rate 00 kg Max tare weight E-E E-E Ø50 50 Ø66 M8x.5 (x) Fb Trolleys with minimized play are recommended Ø80 80 Interface to gripper tool B 73897 73897 Mechspace Pro 70, mech. Mechspace Pro 70, mech. SL=900 300 70700 inkl. tillbehör 73897-7330 inkl. tillbehör Mechspace Pro 70, mech. ( :0 ) 800 B B + + 3 + () + (/B) : Mechspace Pro 70 specification Load table Work pressure (bar) Max load (kg) 50 M8x.5 5 (x) 5,5 6 7 50 60 65 70 70 See load table and load diagram p. 5. 0-360 with rotation stops removed. 3 With max load and 5 bar. To Mechspace Pro: 0,0 μm, FRL unit is included. 80
3 B 3 8 9 7 6 5 7 6 5 0 3. Suspensions Ø (mm) Ft max (mm) Fb (mm) PH (mm) Eye bolt suspension (x) 6 H7 - - 65±0 73956 Fixed suspension (x) - 0 55-0 00±0 739567 739567 73956. Base model Mechspace Pro 70 73897 3a. Outbalanced pneumatics 3b. Pilot control pneumatics 7398 Eye bolt susp -weight 7330 Pilot control 7338 -weight M 733 Pilot control + slow speed function 7339 -weight + slow speed function 733 -weight M + slow speed function 7333 3-weight 733 3-weight M 3-weight + slow speed function 3-weight M + slow speed function 7335 7336 7337. Control unit 730 M M: utomotive Load cell (parallelogram) 7088 7339 3 7338 70880 M 73D Me F B-B Max. allowed load is 70 kg! Operating range variable load: 50 kg (max. 0 kg recommended). 5 70879 6 73397 7 73398 8 73337 9 73399 B B U M S 0 73399-vänster F 73380 S 7088 3 7338 H N 73383 P 5 73373 P Ø50 Ø50 7088 Parallellogram 70 kg C 6 73375 7 73369 M M Posit rt.nr 7708 7300 7803 73980 739590. Options B. Tool brackets Upper brake 7708 Clamp bracket for tube ** 739590 Front brake 7300 Weld-on bracket for tube ** 73980 Kit for manual pressure release * 7803 7709 Brake caliper-sub assembly 73077 MC6S M8x5 Hex socket head cap screw * Facilitates venting of Mechspcae Pro prior to repair and 3 73373 Push-in L-fitting QSML-M5- maintenance work. Mechspace Pro 70 : quantity= pc. elmechlift-monterad broms 5 6 7 Posit 73550 736 7898 73073 rt.nr MC6S M6x70 Hex socket head cap screw Push-in T-fitting QSMT-M5- Bromsok, del-smst Brake caliper, sub-assy Skruv MC6S Screw MC6S M8x5 M8x5 Vinkelkoppling, Push-in instick M5- L-fitting M5- Skruv MC6S Screw MC6S M6x70 M6x70 T-koppling, Push-in T instick M5- fitting M5- Schims- brake unit Shimsbricka Shim washer M6 Hexagon nut with torque part Låsmutter M6 Locking nut M6 Benämning BenämningDo BenämningDo 7803 Manual pressure release kit Étrier de frein, Bremssattel, R sous-ensembl Unterbaugrupp e e Vis MC6S Schraube M8x5 MC6S M8x5 Raccord L-Steckverschr coudé M5- aubung M5- Vis MC6S Schraube M6x70 MC6S M6x70 Raccord T-Steckverschr enfichable en aubung M5- T M5- Rondelle cale Passscheibe Écrou de Sicherungsmut blocage M6 ter M6 BenämningDok BenämningDo R/S ** Tube Ø50 is not included. ntal FRL unit 0,0 μm is included.
00 5 00 550 5 080 (PL-0) PL= 00 (000) 550 305 (PL+905) 380 (PL+980) 080 (PL-0) PL= 00 (000) 00 305 (PL+905) 380 (PL+980) 5 00 550 5 PL= 00 (000) 550 305 (PL+905) 380 (PL+980) PL= 00 ( 73 ( :0 ) (x) 70P B B 30 Ø66 M8x.5 (x) Ø50 50 800 70 kg Max load 500 Nm Max moment 900 mm Stroke SL 0-330 Rotation 0-330 Front rotation 8 l n /cycle 3 ir consumption 5 (-7) bar Work pressure 0 μm Filtration rate 00 kg Max tare weight 00 5 Pillar length PL Ø80 80 Interface 300 to gripper tool (x) 30 739605 Mechspace Pro 70P, pillar mounted, Mech. SL=900 73 300 739605 73897-7330 inkl. 73 tillbehör Mechspace Pro 70P, pillar mounted, Mechspace Mech. Pro 70, mech.. Optional pillar length PL ddition optional PL 739809 llowed PL: Pillar mounted: 000-3000 mm With mobile footplate: 000-000 mm (x) 30 + + 3 + () + (+PL) + (B/C/D) : Mechspace Pro 70P specification (x) 30 Load table Work pressure (bar) Max load (kg) 739605 Mechspace Pro 70P, pillar mounted, Mech. 5 5,5 6 7 See load table and load diagram p. 5. 0-360 with rotation stops removed. 3 With max load and 5 bar. To Mechspace Pro: 0,0 μm, FRL unit is included. 5 50 60 65 70 70 Standard pillar length PL with mobile footplate: 000 mm. 739605
00 5 00 07 07 550 080 (PL-0) 5 PL= 00 (000) 550 305 (PL+905) 380 (PL+980) 080 (PL-0) PL= 00 ( 73. Base model Mechspace Pro 70P 739605 B. Mobile footplate Weight (kg) 30 Mobile (x) footplate 80x80 5 76 Standard pillar length PL with mobile footplate: 000 mm. 739605 76 3a. Outbalanced pneumatics 3b. Pilot control pneumatics -weight -weight M 30 -weight (x) + slow speed function 7330 733 733 739605 7333 Mechspace Pro 70P, pillar mounted, Mech. -weight M + slow speed function 3-weight 733 3-weight M 7335 3-weight + slow speed function 7336 3-weight M + slow speed function 7337. Control unit Pilot control Pilot control + slow speed function 7338 7339 M: utomotive Load cell (parallelogram) 7088 739605 Mechspace Pro 70P, pillar mounted, Mech. B-B Max. allowed load is 70 kg! Operating range variable load: 50 kg (max. 0 kg recommended). Ø50 Ø50 C 7708 7300 7803 73980 739590 C. Options Upper brake Front brake Kit for manual pressure release * 7708 7300 7803 D. Tool brackets Clamp bracket for tube ** 739590 Mobil fotplatta, komplett Weld-on bracket for tube ** 73980 76 76 Mobil fotplatta, komplett 7709 Brake caliper-sub assembly 73077 MC6S M8x5 Hex socket head cap screw * Facilitates venting of Mechspcae Pro prior to repair and 3 73373 Push-in L-fitting QSML-M5- maintenance work. Mechspace Pro 70P : quantity = pc. elmechlift-monterad broms 5 6 7 Posit 73550 736 7898 73073 rt.nr MC6S M6x70 Hex socket head cap screw Push-in T-fitting QSMT-M5- Bromsok, del-smst Brake caliper, sub-assy Skruv MC6S Screw MC6S M8x5 M8x5 Vinkelkoppling, Push-in instick M5- L-fitting M5- Skruv MC6S Screw MC6S M6x70 M6x70 T-koppling, Push-in T instick M5- fitting M5- Schims- brake unit Shimsbricka Shim washer M6 Hexagon nut with torque part Låsmutter M6 Locking nut M6 Benämning BenämningDo BenämningDo 7803 Manual pressure release kit Étrier de frein, Bremssattel, R sous-ensembl Unterbaugrupp e e Vis MC6S Schraube M8x5 MC6S M8x5 Raccord L-Steckverschr coudé M5- aubung M5- Vis MC6S Schraube M6x70 MC6S M6x70 Raccord T-Steckverschr enfichable en aubung M5- T M5- Rondelle cale Passscheibe Écrou de Sicherungsmut blocage M6 ter M6 BenämningDok BenämningDo R/S ** Tube Ø50 is not included. ntal FRL unit 0,0 μm is included.
000 000 50 365 50 90 365 90 30 PH 30 PH PH PH B 88 50 M8x.5 (x) 50 kg Max load 500 Nm Max moment 50 mm Stroke SL 0-30 Rotation 0-330 Front rotation 6 l n /cycle 3 ir consumption 6 (5-7) bar Work pressure 0 μm Filtration rate 00 kg Max tare weight 600 0 00 Interface to gripper tool 600 Trolleys with minimized play are recommended B 70700 Mechspace Pro 50 Base model 70700 inkl. tillbehör 550 700 550 700 000 000 + + 3 + () + () : Mechspace Pro 50 specification Load table Work pressure (bar) Max load (kg) 5 6 7 00 50 50 50 70700 inkl. tillbehör 70700 inkl. tillbehör See load table and load diagram p. 5. 0-360 with rotation stops removed. 3 With max load and 6 bar. To Mechspace Pro: 0,0 μm, FRL unit is included.
SL SL 733835/37 7090/ 7093/5/7/9 c/c Pendulum 50 mm D=6,5 ntal 733835 BenämningDo R/S BenämningDo BenämningDo Benämning BenämningDok rt.nr Posit 50 mm D=6,5 Pendulum 733835 55 0 5 0 70 90-90 D=6,5,5 (x) 50 ufhängung R/S BenämningDo BenämningDok BenämningDo D=6,5 90-90 D=6,5 90-90 Pendulum Suspension 90-90 D=6,5 70938 Benämning Pendulum 90-90 D=6,5 BenämningDo Nedpendling ntal 365 365 PH PH 50 50 rt.nr 90-0 D=6,5 Pendulum 7090 L 0 0 L-0 0 30,5 50 L,5 50. Suspensions Height PH (mm) Posit Qty Suspension PH 50 Suspension PH 90-0* 50 90-30-70-0 - 733835-7090 733837 709 709 Pendulum x PH=50-370 D=6,5 C/C=800 Suspension x PH 50-370* 50-90-330-370 000 7093 7095 Suspension x PH 0-90* 0-50-90 000 7097 7099 Ø (mm) 6,5 0,5 * Cut to selected suspension height PH. Fits trolley HB./ HB3 Risk for collision When Mechspace Pro 50 is equipped with a front brake, the lifter must be lowered in order to avoid collision with the crane when utilizing a full stroke. The table below gives the recommended suspension height PH as a function of the stroke SL. SL (mm) PH (mm) rt. nr. 0-000 0-00 0-080 0-0 0-60 0-00 0-0 0-50 50 90 30 70 0 50 90 30 733835/37 7090/ 7090/ 7090/ 7090/ 7093/5 7093/5 7093/5. Base model Mechspace Pro 50 70700 FRL unit 0,0 μm is included. 3a. Outbalanced pneumatics 3b. Pilot control pneumatics -weight 7370 Pilot control 7378 -weight M 737 Pilot control + slow speed function 7379 -weight + slow speed function 737 -weight M + slow speed function 7373 3-weight 3-weight M 737 7375 3-weight + slow speed function 3-weight M + slow speed function 7376 7377. Control unit 707 FRL unit (B) with micro filter M: utomotive Load cell (parallelogram) 7889. Options Upper brake Front brake Kit for manual pressure release * 70700 Mechspace Pro 50 Base model 7708 B B 70755 7803 Max. allowed load is 70 kg! Operating range variable load: 50 kg (max. 0 kg recommended). * Facilitates venting of Mechspcae Pro prior to repair and maintenance work. Mechspace Pro 50 : quantity = pcs. 7708 70755 7803 70700 inkl. inkl. tillbehör
PL 30 PL 635 335 900 60 30 30 30 335 900 335 335 50 900 900 77-30 335 700 550 600 635 900 60 50 600 600 600 88 50P M8x.5 (x) 50 kg Max load 500 Nm Max moment 50 mm Stroke SL 0-30 Rotation 0-330 Front rotation 6 l n /cycle 3 ir consumption 6 (5-7) bar Work pressure 0 μm Filtration rate 330 kg Max tare weight 900 mm Pillar length PL 0 00 Interface to 77 gripper 77 tool 77 600 77 550 550 550 700 700 700 PL= ( :0 ) Ø (x) (x) - - - ( :0 ) 600 600 600 600 (x) (x) (x) 600 600 600 600 550 700 + + 3 + () + (+PL) + (B) : Mechspace Pro 50P specification - smst-mspace50p-dok smst-mspace50p-dok Load table Work pressure (bar) Max load (kg) smst-mspace50p-dok 5 6 7 00 50 50 50 smst-mspace50p-dok smst-mspace50p-dok 707 See load table and load diagram p. 5. 0-360 with rotation stops removed. (x) 3 With max load and 6 bar. To Mechspace Pro: 0,0 μm, FRL unit is included. 600 600
PL PL. Base model Mechspace Pro 50P 70705. Pillar FRL unit 0,0 μm is included. Pillar PL=900 7900 ( :0 ) ( :0 ). Optional pillar length PL ddition optional PL 739809 llowed PL: 700-00 mm 3a. Outbalanced pneumatics 3b. Pilot control pneumatics 707 FRL unit (B) with micro filter smst-ms smst-mspace50p-dok -weight 7370 Pilot control 7378 -weight M 737 Pilot control + slow speed function 7379 -weight + slow speed function 737 -weight M + slow speed function 7373 3-weight 737 3-weight M 7375 3-weight + slow speed function 7376 3-weight M + slow speed function 7377. Control unit M: utomotive Load cell (parallelogram) 7889 B. Options Upper brake Front brake Kit for manual pressure release * 7708 70755 7803 Max. allowed load is 70 kg! Operating range variable load: 50 kg (max. 0 kg recommended). * Facilitates venting of Mechspace Pro prior to repair and maintenance work. Mechspace Pro 50P : quantity = pcs. 7708 70755 7803 70700 Mechspace Pro 50
Mechspace Pro is extremely easy to manoeuvre and provides ergonomic freedom of movement within a large working area. Mechspace Pro 50 Mechspace Pro 50P Mechspace Pro s moment absorbing features gives important advantages for complex material handling operations, and for gripping and rotation of eccentric loads.
Mechspace Pro 50
For more information, contact your sales representative. MOVOMECH B Kabelvägen 9 S-9 09 Kristianstad, Sweden Telephone: +6 (0) - 8 9 00 Fax: +6 (0) - 8 9 8 E-mail: info@movomech.se Web: www.movomech.se Copyright 06 Movomech B 06-08-0