Hire Equipment
Table of Contents Product Code Page Cembre RHC131 Hydraulic Crimp Head 65200650 3 Prysmian G14 Crimp Head 65200649 3 Cembre TC04 hydraulic cutter head 65200646 3 Cembre ECW-H3D hydraulic press head 65200648 3 Foot operated double speed pump 65200645 4 110v Power Pack 65200644 4 Overhead Line Winch 65200651 5 Cable Drum Trailer 1550Kg Drum Capacity 65200653 6 ABC Overhead / Underground Winch 65200652 7 Triple Drum Trailer Stacked 65200654 8 Triple Flat Bed Braked Trailer 65200655 9 2
Prysmian G14 Crimp Head The "G" shaped Cembre RHC131 hydraulic presshead, complete with male Quickfit coupler for connection to Cembre hydraulic pump units with a working pressure of 700bar Suitable for compression lugs up to 400mm 2 and splices up to 185mm 2. Cembre ECW-H3D hydraulic press head G shaped compression head delivers a compressive force of 14 tonnes. Can crimp copper connectors up to 630mm2 Can crimp aluminium connectors up to 400mm2 Full range of U type dies can be employed when used with a PUADP adaptor Cembre TC04 hydraulic cutter head Designed to accept un-insulated crimp lugs and splices between 400mm 2-630mm 2. The ECW-H3D can also be used for a range of insulated terminals, overhead-line and earthing applications. Featuring a removable die holder, this crimping tool is able to accept C-shape die sets with the use of the AU230-130D adaptor die, This Cable Cutter is suitable for Cutting Copper, Aldrey, Aluminium, Aluminium-Steel Cables and Steel Ropes, Aluminium and Steel Rods with a Max Overall Diameter of 40mm 3
Foot operated double speed pump 110v Power Pack Foot operated double speed pump, developing a maximum pressure of 700 bar. The pump is supplied with 3 m long high pressure flexible hose complete with female self-lock quick coupler. Pressure can be withdrawn at any time during operation by depressing the release lever. A solid shaped stand gives the pump stability during operation. Cembre 110v Power Pack Cembre 700 bar (10 000 psi)110 volt power pack with hand remote 4
Overhead Line Winch The next generation of the proven 902 winch, widely regarded as the industry standard, this machine has proven reliability, due mainly to its excellent design & manufacture. The engineered robustness allows use in almost any environment. The machine can be used for either new construction or refurbishment works, with the use of rope drums or split drums respectively. The cable winch trailer is fitted with a dead mans handle, which means if the control is released the load is maintained. Hydraulically controlled prop legs and Linespreader make operation simple and quick. RTA compliant 12V road lighting, overun and parking braking system are standard. The machine is supplied with a shaft, split drum tensioning device and weatherproof cover but drums / accessories are delivered separately, for details please see Winch Accessories. Pulling Force Speed Engine Weight Dimensions 3000kg 0-100m/min Briggs & Stratton 22hp Electric Start 800kg (without rope/drums) 1520kg (with rope drums) 3200 x 2350 x 1700mm 5
Cable Drum Trailer 1550Kg Drum Capacity Cable Drum Trailer Specification Gross Weight 2000Kg Unladen Weight 450Kg Drawbar Load 100Kg Axle Weight 1900Kg Drawbar Height 450mm Overall Length 3300mm Overall Width 2300mm Coupling Type 30mm or 40mm Eye, 50mm Ball Spindle Diameter 50mm c/w Locking Collars Tyres 195 x 14C Brakes Overrun Auto-reverse Lights Road going EEC Mudguards Thermoplastic Prop Stands 48mm Sliding type to rear Jockey Wheel Heavy duty 48mm diameter telescopic type Finish 2 Coat Commercial Standard Drum Lift 25cc/Stroke Hand Pump operating 2off Single Acting Rams via Flow Divider for a balanced lift. Once raised, the Cable Drum is mechanically locked in the travelling position Cable Drum Capacity Cable Drum Weight 1550Kg Cable Drum Max Diameter 2150mm Cable Drum Min Diameter 750mm Cable Drum Width 1400mm 6
ABC Overhead / Underground Winch This particular winch is designed for use on both Overhead Lines and Underground Cables. A very compact and lightweight trailer winch the 210 has a dynamometer which allows us to preset the pulling force at 850kg which can be adjusted upto 1,000kg for specific occasions. This makes the machine ideally suited to ABC work. A split drum for re-conductoring work or 8mm x 500m paracore rope and rope drums for new construction are available seperately. When used on underground cable work the additional seperately supplied boom is required to allow horizontal line pulls in ducts and open trenches. Pulling Force Speed Engine Weight Up to 1000kg 0-15m/min Honda 4-stroke 8hp 260kg (without rope) 7
Triple Drum Trailer Stacked In the past it has been necessary to have several vehicles simply to enable all of the equipment required to be transported to the site. Now all that is required is one vehicle to tow the three phase conductor stringing winch and one to tow the 3 Drum Cable Drum Trailer. The trailer can be loaded, with all 3 drums, in the depot. The loading of the 3 drums should take no more than 10 minutes, and then straight out to site for almost immediate stringing to commence. The trailer is a one man operation, with a centrally located operation station where control of the individually disc braked drums can be maintained up to a torque of 500Nm. Dimensions Unladen Weight L5.19 x W2.22 x H2.74m 1100kg Max Drum Diameter 1.2m Max Drum Width 1.05m Max Drum Weight 710kg 8
Triple Flat Bed Trailer Braked A uniquely versatile tool, a single operator can independently control the tension of all three conductors. Ideally suited to the needs of cost conscious installation crews who require fast turnarounds and maximum productivity. Supplied with a full set of detachable stabilisers to maximise trailer stability during tensioning. Fitted with smooth operating disk brake for conductor control. Advantages: Low centre of gravity Off set drums to enhance stability during towing Independent disc braking of each drum Standard drum drive pin location Convenient storage area for stabilisers (located in base frame) Specifications: Trailer Length: Width: Height: Weight (net): Weight (gross): 4710mm 1768mm (without stabilisers) 1777mm (without drums or stabilisers) 1100kg 3100kg Drum Max Diameter: Max Width: Braking Capacity: Drum Hole: Drum Weight (Max): 1220mm 830mm 60kgm 65 or 80mm (specify) 640kg (x3) 9