Parts List GoPump C-series & R-series, Spec 000 or Higher
Table of Contents Dispenser Identification Number for GoPump... 3 Model Number Overview, How to Order, Contact Information... 4 Front View of the Outer Covering... 6 Description... 7 End View of the Outer Coverings and Parts... 8 Description... 9 Upper Panel, End Views for Spec 00x... 0 Upper Panel, End Views for Spec 00... Upper Compartment Parts... Description... 3 99-D Electronics Package... 4 Description... 5 Handle Switch Parts... 6 Description... 7 Junction Box and Parts, Power Supplies, Ballast, Relay, Lighting... 8 Description... 9 Chassis (Frame) Parts Remote Dispenser... 0 Description... Chassis (Frame) Parts Self-contained Dispenser... Description... 3 Meter, Outlets, Adapter Outlets, and Solenoid Valve Parts... 4 Description... 5 Inlet Parts... 6 Description... 7 Filters and Inlet Check Valve Assemblies... 8 Description... 9 SB-00 Meter... 30 Description... 3 Type 75 Pumping Unit... 3 Description... 33 Back Cover, Bennett Address & Contact Information... 34
DIN (Dispenser Identification Number) for GoPump Box Hydraulic Addition: C3R = Single Product, Single Hose, High Flow Remote 3
Model Number Overview Placing A Parts Order Go-C or Go-R Motor Size X Remote, -Product, -Hose N/A X Remote, -Product, -Hose N/A X4 Remote, -Product, -Hose N/A X3 Remote, -Product, -Hose High Flow N/A X3 Self-Contained, -Product, -Hose /3HP Intermittent X3D Self-Contained, -Product, -Hose, Heavy Duty 3/4HP Cont Duty X7 Self-Contained, -Product, -Hose 3/4HP Cont Duty X5 Self-Contained, -Product, -Hose () /3 Intermittent X5D Self-Contained, -Product, -Hose, Heavy Duty () 3/4HP Cont Duty Go-C Commercial series displays volume amounts only. Go-R Retail series displays money & volume amounts. GoPump series is available in an alcohol compatible model for use with ethanol/methanol. Parts for these units are NOT contained in this manual All orders must include The part number, description, and quantity required. The complete Ship To Address. The complete Bill To Address. A signed Purchase Order. Orders may be faxed to (3) 799-60 Orders may be mailed to: Bennett Pump Company or Bennett Commercial Pump Company 8 E. Pontaluna Road Spring Lake, Michigan 49456 Parts orders are accepted only from authorized Bennett Pump Company or Bennett Commercial Pump Company distributors and service representatives. BENNETT PUMP COMPANY BENNETT COMMERCIAL PUMP COMPANY 8 E. Pontaluna Road Spring Lake, Michigan USA 49456 Tel: in USA (800) 35-768 Technical Service Help in USA: (800) 43-6638 Tel if outside USA: (3) 798-30 Fax: (3) 799-60 Email for technical service: techhelp@bennettusa.com General email: sales@bennettusa.com 4
This Page Intentionally Blank 5
Front View of the Outer Covering 6 7 3 4 5 Shown Above C7 -Product, -Hose Outlets, with Gallon Upper Covers 6
Front View Of Outer Coverings - Descriptions Ref. No. Part No. Description Qty. 04567 Lens, Ad Panel (spec 000) 4.95 at widest point 05398 Lens, Ad Panel (spec 00 & up) 5.3 at widest point 04689 04688 04687 NOTE: Both Lens shown above are plain, no screening. For screened lens with product names or special graphics, Consult Factory. NOTE: Covers do not include Item #7 lens (order lens separately) Cover, White No Screening (Twins) Cover, Right Opening, White No Screening (Singles) Cover, Left Opening, White No Screening (Singles) --For Other Colors or Screening, Consult Factory 3 00437 Key 4 00375 058 Lock (includes lock, hex nut, & screw) Cam (arm that engages the lower door & upper cover) 5 054 Lower Door, RED (lock is not included with any doors) 04568 WHITE 0598 GREEN 05554 BLACK 0566 YELLOW 058 STAINLESS STEEL --For special colors or screened doors, Consult Factory-- 6 04570 Top Housing (Stainless Steel) 7 0483 Lens, Upper Cover,.5 x 8.75 (NOTE: Lens has double backed adhesive tape for easy installation on back of Covers (items #) 4 for twin for Single 7
End View of Outer Coverings and Parts 6 3&4 5 7 0 6 3 4 5 7 8 9 8
End View of Outer Coverings and Parts - Descriptions Ref. No. Part No. Description Qty. J70450 Handle Stop A740 Screw A500 Washer [ Single 4 Twin] H550 Handle [ Single Twin] 3 Model & Serial Plate (not available as a service part) 4 A400 Pop Rivet 4 5 Label, Underwriters Listing (not available as a service part) 6 J5600 Nozzle Holder Single Twin 7 J8690 Hose Hook Single Twin 8 N7430 Elbow, painted black Single Twin 9 A58370 Reducer x ¾ Single Twin 0 See Upper Panel End View Drawings on the two pages [ Single following Twin] 0457 NOTE: See Model Plate for Spec Number NOTE: See following pages for more panels Panel, lower, outlet side Single Twin 04573 Panel, lower, (opposite the hose side)-singles A4450 Screw (per nozzle holder) 3 A860 Screw (per hose hook) 4 A470 Washer (per hose hook) 5 A9008 Nut (per hose hook) 6 A4450 Screw, button head SOC Cap (per top cover) 4 7 A7960 Pin, Spirol (per handle) 9
Upper Panel, End Views for Spec 000 0
Upper Panel, End Views for Spec 00
Upper Compartment Parts 3 4 5 6 7 9 8 0
Upper Compartment Parts Descriptions Ref. No. Part No. Description Qty. J090 Nozzle Boot Single Twin 0565 Cap Screw (per nozzle boot) 3 3 0366 03998 03660 03996 Mask, Go-C, Volume Only Cutout Plain White, No Graphics White, USA spec Mask, Go-R, Money & Volume Cutout Plain White, No Graphics White, USA spec --For Other Colors or Screening, Consult Factory 4 048 Conduit, ¾ for field wiring 5 04358 Nut-Lock (per field wiring conduit) 6 04567 05398 Lens, Ad Panel (spec 000) 4.95 at widest point Lens, Ad Panel (spec 00) 5.3 at widest point NOTE: Both Lens shown above are plain, no screening. For screened lens with product name or special graphics, consult factory. [ Single 4 Twin] 7 045 0450 CPU/Master Display Volume Only CPU/Master Display Retail Single Twin 8 03655 Memory Board Single Twin 9 0453 Auxiliary Display Board Volume Only Auxiliary Display Board Retail 0 0077 Manager s Keypad Single Twin 3
99D Electronics Package for GoPump 5 6 3 0 4 7 8 9 4
99D Electronics Package for GoPump Descriptions Ref. No. Part No. Description 0366 Mask, Plain White, for Go-C 03998 Mask, Screened Gallons, for Go-C, Black on White 03660 Mask, Plain White, for Go-R 03996 Mask, Screened, Gallons & Dollars, for Go-R 045 CPU / Main Display Circuit Board, Go-C 0450 CPU / Main Display Circuit Board, Go-R 3 0453 Auxiliary Display Circuit Board, Go-C 045 Auxiliary Display Circuit Board, Go-R 4 0674 Pulser-Mounting, Assembly 708 & GoPump (x3/x33 has pulsers per hose outlet) 5 03786 Cable, CPU to Pulser (x3/x33 has pulsers per hose outlet) 6 0380 Cable, CPU to Aux Display 7 03794 Power Supply (encapsulated), 5volt 03795 Power Supply (encapsulated), 30volt 8 0379 Wire Assembly, CPU to Power Supply 9 0077 Manager s Keypad 0 03953 Totalizer Assembly (A GoPump Option) 03857 (not shown) Lens, Totalizer, Self-Adhesive 03655 Memory Circuit Board 0379 Sealing Standoff 055 Care Kit 0099 Fuse, -AMP, 50v, 5mm x 0mm for 5 or 30v Power Supply 04377 Fuse, /8-AMP, 50v, 5mm x 0mm for 5v Power Supply A59760 Relay, Solid State A48730 Gasket-3/8 x ½ A4960 Resistor, wire wound power Qty Per Hose 04700 Fuse, /6 Amp for 30volt Power Supply 5
Handle Switch Item #3 Nozzle Boot Item # Handle Spring Item # Handle Switch, pieces (Shown in the Off (open) Position) Item #4 Shaft & Lever Assembly 6
Handle Switch Description Ref. No. Part No. Description Qty per Hose 03788 Switch, Magnet, and Wire Assembly J69660 Spring for handle 3 J090 Nozzle Boot 4 03657 Shaft & Lever Assembly 7
Junction Box and Parts 5 8 5 4 6 4 *The JUNCTION box shown is for a twin selfcontained GoPump 9 7 5 5A 3 8 8
Junction Box and Parts Description Ref. No. Part No. Description N04400 Ballast (Optional), 5v, 60Hz N0580 Ballast (Optional), 5v, 50Hz N0590 Ballast (Optional), 30v, 60Hz N0580 Ballast (Optional), 30v, 50Hz 048 Junction Box Enclosure (M-000 and M-00x) Qty NOTE: The Junction Box Enclosure is sometimes referred to as a Ballast Box 3 J350 Bracket, Support 4 A8370 Screw 5 5A A430 J3380 Socket, Quickwire & Screw Washer 4 4 N0700 Wire Jumper 6 04358 Nut-lock (per field wiring conduit) 7 H330 Cover 8 A670 Screw Hex Hd Cap 4 9 E5360 Strip 0 Not used Not used A5330 Tube, Fluorescent, 3 Not used 4 03794 Power Supply Circuit Board, 5volt (per hose) 03795 Power Supply Circuit Board, 30volt (per hose) 5 03854 Relay Assembly, Self Contained (per product) 6 03797 Cover, CPU Power Wire Harness (per hose) 7 A900 Nut, Hex/Ext LW #6-3, FTA (per hose) 4 9
Chassis Frame Parts Remote Dispenser 7 6 3 5 4 0
Chassis (Frame) Parts Remote Dispenser Description Ref. No. Part No. Description Qty. 04564 05367 Frame, Upper Side, hose side Frame, Upper Side, No Hose per hose per single 04557 Frame, Front and Rear 3 04560 Rail, Support (connects front & rear frame and supports the deck assembly) 4 04558 Brace, Lower Corner (connects front & rear frame) 5 05 Valve, Manifold & Deck Assm for x4 Models (shown in photo), and x3/x33 see separate page for breakdown of parts for x4 and other models 6 Meter, Outlets, and Solenoid Parts see separate page for breakdown of parts 7 N78990 Cable Reel Assembly (Spring Rewind, includes heavy duty nylon cable). per hose in 4000 series NOTE: Cable Reel Assembly is standard for Go-R series dispensers. For Go-C series dispensers, the assembly is available as an option as a field installed kit. NOT SHOW N N35503 N355304 N35530 NOTE: Does not include hose clamp Hose Clamp for 5/8 ID Hose Hose Clamp for 3/4 ID Hose Hose Clamp for ID Hose per hose NOTE: Hose clamps are not furnished with new dispensers. Hose clamps are available as a service part only.
Chassis (Frame) Parts Self-Contained Dispenser 5 4 6 7 3
Chassis (Frame) Parts Self-Contained Dispenser Description Ref. No. Part No. Description Qty. Motor See Motor Chart Below Pulley See Pulley Chart Below A330 Screw-Allen Socket Set, 5/6 8 x 3/8 3 A609 V-Belt, 33 4 04479 Manifold, -product, twin, self contained 5 00535 Gasket, meter inlet 6 N680 Gasket, pumping unit to manifold 7 0456 Deck, Self Contained (M-000) Motor Chart Below Motor HP Voltage Hertz Phase Con/Int* Used in Model Numbers J630 /3 5/30 60/50 Int X3, X5 J9580 3/4 5/30 60/50 Con X3D, X5D, X7, X33 J740 / 5/30 60/50 Con X3 & X5 as an option H900 /3 0/380 60/50 3 Int X3, X5 J43550 / 0/380 60/50 3 Con X3 & X5 as an option H940 3/4 0/380 50 3 Con X3D, X5D, X7 N5730 3/4 30 50 Con X3D, X5D, X7 *Con/Int refers to Continuous Duty Cycle or Intermittant Duty Cycle Motor Pulley Chart Below Motor Pulley HP Hertz A4440 /3, /, 3/4 60 00037 3/4 50 00007 /3, / 50 3
Meter, outlet, adapter outlet, and solenoid valve parts 7 8 9 0 3 4 5 6 Outlet Assembly for x3 Item 4 o-ring 7 5 3 Item #6 Valve, Sealed conduit (not shown), Nipple, & Outlet (Service Assembly) 4
Meter Outlet, Adapter Outlet, and Solenoid Valve Parts - Descriptions Ref. No. Part No. Description 04439 04440 Meter Outlet, Meter to Solenoid Valve Meter Outlet, when no solenoid valve is used Per Hose Outlet Qty. 0558 0559 [NOTE: Remotes and xx7 Self-Contained have solenoid valves; xx3 and xx5 have solenoids only if optional prepay/preset feature is ordered] Valve Assm-Service, 5v, GoPump (includes sealed conduit.) Valve Assm-Service, 30v, GoPump (includes sealed conduit.) --NOTE: For mechanical dispensers (3900 & 4000 series), cut off connector and terminate wires at terminal strip 3 0343 U-bolt 4 A90 Nut 0 5 05045 Bracket, Outlet Support 6 00534 Screw, Soc Hd Cap (for Bracket, Outlet Support) 7 A0840 Pipe Plug, Countersunk head, 8 04444 Adapter, Outlet (solenoid to nipple) 9 A8440 3 Nipple (not shown) x -/ (exits through pump frame and into a painted black elebow) 0 087 SB00 Meter, Gallon Style 089 SB00 Meter, Liter Style NOTE: Gallon or Liter Style is NOT determined solely by the measurement display of the mechanical computer. It IS based upon the specific model style of the mechanical computer and the input gearbox assembly. For example, most dispensers use the 087 Gallon Style Meter even when the display output of the mechanical computer is for liters. Each meter has a metal part number tag attached for identification purposes. Check with factory if you are uncertain about a meter part number. See Separate Page for Breakdown of Meter Parts. 0444 Meter Outlet, Opposite Solenoid Side for x3 / x33 0444 Meter Outlet, Solenoid Side for x3 / x33 3 N66540 Tube 3 4 A94 O-ring (not shown) 6 5 A8440 Nipple 3 6 048 Valve, conduit, nipple, and 0444 outlet service kit 5
Inlet Parts & x3 MODELS 6
Inlet Parts Description Ref. No. Part No. Description Qty. 04443 Manifold, Inlet, xx4 model, and x3 model per dispenser 0480 Nipple, Black, -/ x 5 per inlet pipe 3 A3750 Union, -/ Pipe per inlet pipe 4 0486 Check Valve Assy (A390 Filter) (Remote models only) per meter See Separate Page for Breakdown 5 0456 Deck, Remote per dispenser 6 A670 Screw Hex Hd Cap 4 per check valve 7 A4706 05336 Seal, Square Used if 04443 manifold is unpainted Gasket, Flat Used if 04443 manifold is painted blue per check valve 8 A7430 Screw Hex Hd Cap 4 per check valve 9 N/A 0 J8040 Gasket, Pumping Unit Inlet (self contained models) per Pumping Unit 04536 Adapter Inlet, xx3, xx5, xx7 (self contained models) per Pumping Unit 7
Filters and Inlet Check Valve Assemblies 8
Filters and inlet check valve assemblies Description Ref. No. Part No. Description 04435 Body, Filter & Check Valve H940 Check Valve Assm 3 H38680 Cover, Check Valve 4 H38490 Gasket 5 A04400 Plug 6 A7760 Screw 4 Per Product Inlet Qty. 7 A390 N33350 N34730 8 N/A Filter, Paper, 35-micron (standard) Strainer, 00 Micron (optional) Sack, Filter (optional for use with N33350 Strainer) 9 N90500 Spring 0 N5470 Cover N60 Gasket A0990 Plug 3 N/A 4 A47990 Screw 4 5 00535 Gasket, Meter Inlet 6 --------- Pipe Dope applied to male threads on plug 7 N/A 8 N/A 9 /9 4/9 5/9 0485 N54770 A4700 A 04436 A7050 Adapter, Filter, Spin-On Assm. (optional) Includes: Adapter, Filter Seal, Square O-ring Casting Filter, Spin-On, 0-Micron (optional) 9
SB00 Meter 30
SB00 Meter Descriptions 3
Type 75 Pumping Unit 3
Type 75 Pumping Unit Descriptions Ref. Ref. 3 4 5 6 7 8 N90730 Pumping Unit - Type 75 N5060 N5060 N380 A5490 A58360 N33 N5490 N5480 N5470 Body (non-reverse float) Body (reverse float) Blade, Rotor * Clamp Connector, Male Cover, Atmos. Chamber Cover, Bypass Valve Cover, Control Valve Cover, Filter 6 43 44 45 46 47 48 J350 J50670 N5950 N6030 J56690 N33350 A390 N6930 Spring, Control Valve (H.D.) Spring, Filter Stator, H.D. Stop, Filter Insert Strainer Assembly-49 micron Metal Strainer (not shown) Paper Filter (not shown) *Tube, Vent Assy- 904 Tube, Vent Assy- 9033 & 9036 Tube, Vent Assy- 9044 & 9048 3 4 9 0 3 4 5 6 7 8 9 0 3 N88830 N88840 N690 N640 N670 N630 N60 N650 N660 N900 A9950 3N070 A9004 A48 A0990 Float, Non-Reversing Float Bushing, Non-Reversing Gasket, Atmos. Cham. Cover Gasket, Bypass Valve Gasket, Clamping Ring Gasket, Control Valve Cover Gasket, Filter Cover Gasket, Inlet (Separator) Gasket, Outlet (Separator) Insert Key *Nut, Tube *Nut O Ring Plug, Pipe /4 49 50 5 5 53 54 55 N480 N0730 A3090 H876904 A080 A470 A00030 Valve Assembly, Bypass Valve Assembly, Control Valve, Relief 30-50 psi Valve Assembly, Float Washer *Washer Washer, Lock 4 5 6 7 8 9 30 3 3 33 34 (9) 35 36 37 38 49 40 4 4 N0690 N380 N5590 A630 J6870 N0380 A48000 A3370 H350 A4704 N3830 A9950 A5350 A0690 A479903 A47990 A47990 A4800 J95603 3N080 Pulley Ring, Throw Out (H.D.) Ring, Clamping Ring, Retaining Rotor Support Assembly Assembly includes: Cover, Rotor Screw, M3.5 Flat Hd Seal, Lip (with plug) Seal, Retainer Seal, Square Rotor and Shaft Assembly Assy. includes Rotor, Shaft and the following: Key Ring, Retaining *Screw Screw, M8.5x5MM *Screw, M8.5x0MM Screw, M8.5x5mm Screw, M6 x0mm Separator & Air Eliminator *Sleeve, Tube 3 Ref 4 6 Ref. No. Part No. Description Qty. 8 9 0 3 4 4 6 KR036604 N690 N640 N670 N630 N60 N650 N660 E9930 A3370 A4704 Gasket Set Set includes: Gasket, Atmospheric Chamber cover Gasket, Bypass Valve Gasket, Clamping Ring Gasket, Con. Valve Cover Gasket, Filter Cover Gasket, Inlet (Separator) Gasket, Outlet (Separator) Gasket, Meter (Dwg. #9) Seal, Lip (with plug) Seal, Square *Not part of the pumping unit 33
Bennett Pump Company Bennett Commercial Pump Company 8 E. Pontaluna Road Spring Lake, Michigan USA 49456 Tel: (3) 798-30 Fax: (3) 799-60 Email: sales@bennettusa.com techhelp@bennettusa.com www.bennettusa.com www.bennettpump.com 34