Uses a L96-08 vented gas cap

882 15

0701-0126 Side profile GAS TANKS FOR DRESSERS Now available in 17 1 /2 or 20 1 /2 widths One-piece tanks feature a 3 stretch Curved bottom for a custom look Includes a raw dash panel that replaces the existing dash Factory sealed powder coat primer on the inside of tanks 03-07 style fuel-injected tank accepts the stock OEM fuel-pump assembly and uses a L96-09 vented gas cap 0701-0190 0701-0127 96-06 style carb tanks include a filler plate/neck assembly; use a L96-09 vented gas cap Tanks have an approximate 6-gallon capacity Side profile Tanks fit with RWD Profile (0804-0247) and ProTour (0804-0248) Seats, sold separately, see page 132 NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending unit. FOR 96-07 FLTR/FLHT/FLHX MODELS 0701-0126 1 03-07 style fuel-injected gas tank (20 1 /2 ) $1,186.95 0701-0127 96-06 style carb gas tank (20 1 /2 ) 1,229.95 0701-0318 1 03-07 style fuel-injected gas tank (17 1 /2 ) 1,186.95 0701-0319 96-06 style carb gas tank (17 1 /2 ) 1,229.95 FOR 96-07 FLHR MODELS 0701-0189 1 03-07 style fuel-injected gas tank (20 1 /2 ) $1,229.95 0701-0190 96-06 style carb gas tank (20 1 /2 ) 1,229.95 0701-0320 1 03-07 style fuel-injected gas tank (17 1 /2 ) 1,229.95 0701-0321 96-06 style carb gas tank (17 1 /2 ) 1,229.95 1 Uses a L96-08 vented gas cap. 1914-0009 1914-0009 0701-0110 0701-0110 Side profile 0701-0114 Side profile 0701-0114 SMOOTH-TOP GAS TANKS Custom tanks for custom builders One-piece, single-cap design Handcrafted from 14- and 16-gauge steel Requires the use of an L96-09 vented gas cap and 22mm petcock Required mount kits may be used on any custom application NOTE: Not for use on fuel-injected models. CUSTOM TANK FOR 00-06 SOFTAIL 1914-0009 1 21 1 /4 L x 15 1 /2 W, (approx. 4.5 gal.) $799.95 CHOPPER-STYLE TANKS 0701-0110 Short, curved bottom, 23 3 /4 L x 12 1 /2 W 953.95 UNIVERSAL TANKS 0701-0114 5 tear-drop, std. mount 28 L x 16 W 868.95 0701-0115 5 tear-drop, recessed mount 25 L x 16 W 1,129.95 0704-0001 0704-0002 UNIVERSAL TANKS (CONT) 0701-0117 5 tear-drop narrow, recessed mount 25 L x 14 W $1,078.95 TANK MOUNTS 0704-0001 Frame mount kit 39.95 0704-0002 Recessed mount kit 71.95 1 Requires the relocation of gauges, indicator lights and ignition switch; FXSTD will require the use of a custom seat. WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 883

0701-0382 Gas It fuel 0502-0256 injetion kit 0701-0381 VINTAGE GAS TANKS Add a period-style bobber tank to your Softail Steel gas tank inspired by the Softail conversion Roland Sands Designs created and dubbed El Borracho Available for carbureted or fuel-injected models 0701-0315 Fuel-injected tank includes a RSD Gas It fuel injection kit that install with simple hand tools and no fabrication is required Tanks rest on a clever steel backbone cover that hides the OEM wiring and holds stock ignition switch to deliver a clean look Holds three gallons of fuel Roland Sands Design gas caps sold separately; see page 892 Matching seat kit, rear fender kit and handlebars also sold separately FOR 01-09 SOFTAIL MODELS W/ FUEL INJECTION 0701-0382 Gas tank kit (tank and cover, with Gas It kit) $1,761.95 FOR 00-06 SOFTAIL W/ CARB 0701-0381 Gas tank kit (tank and cover) 1,199.95 0701-0192 0701-0383 FOR 00-06 SOFTAIL W/ CARB (CONT) 0701-0315 Gas tank only $1,099.95 0502-0256 Backbone cover only 246.95 D-2 GAS TANKS Made with 16-gauge steel Works with most Pro-Street or Chopper frames Comes with recessed mounts and pop-up cap 0701-0193 0701-0384 T-BOLT GAS TANKS Made from heavy-gauge steel NOTE: Not for use on fuelinjected Features pop-up gas cap and recessed mounts models. 0701-0383 27 L $1,369.95 0701-0192 27 L $1,369.95 0701-0193 31 L $1,369.95 0701-0384 31 L 1,369.95 884 0701-0183 CUSTOM GAS TANKS Three types to choose from Narrow Mustang type features a single cap, two petcock outlets, straight mounting tabs and a hole-to-hole center line on mounting brackets of 17 1 /2 Extra Wide Mustang type features a high tunnel for the Fatbob look, one left side petcock outlet and a hole-to-hole center line on mounting brackets of 17 11 /16 1-Piece Fatbob style features a left side external petcock outlet, indent on tank bottom for rocker box clearance and a hole-to-hole center line on mounting brackets of 19 3 /4 0701-0184 NOTE: Not for use on fuel-injected models. NOTE: All tanks are pressure-tested and are bare metal; NOTE: Paughco recommends all tanks be mounted on leather spacers or bushings. fit before painting. NARROW MUSTANG TYPE (16 1 /2 L X 9 W X 7 D; TUNNEL MEASURES 2 1 /2 W X 2 1 /4 D) 0701-0183 2.2 gal. tank $150.95 EXTRA WIDE MUSTANG TYPE (16 1 /2 L X 12 W X 7 D; TUNNEL MEASURES 2 1 /2 W X 5 D) 0701-0184 3 gal. tank 150.95 1-PIECE FATBOB STYLE (19 1 /2 L X 13 W X 8 D; TUNNEL MEASURES 2 3 /16 W X 4 1 /4 D) 0701-0185 1 4.75 gal. tank 165.95 1 Will not work on any stock FXR or FLT. 0701-0185 WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.

1914-1863 1914-1813 0701-0167 Side profile Side profile Side profile ONE-PIECE TANKS 5.1-gallon tank is made from 16-gauge stamped steel Available in standard or 2 extended length Smooth-top tank eliminates the dash completely and requires custom mounting of gauges, ignition switch and dash lights Dash-style tank has mounting provisions for stock-style dash and ignition switch (not included) Tank with fuel gauge bungs accepts OEM-style or aftermarket fuel gauges Aero tank includes gas caps; screw-in cap tank requires the use of 82-E96 gas caps (sold separately) NOTE: Seat nose may require modification to fit properly with extended tanks. Some models may require sending unit modification. FOR 01-06 FXST, FLST W/ FUEL INJECTION AND 04-06 FXST, FLST W/ CARB (EXCEPT FXSTD) 1914-1861 1 Dash style with fuel gauge bung, single screw-in cap $389.95 0701-0167 1,2 2 extended w/ one screw bung and dummy bung for OEM gas gauge 359.95 1914-1863 1 2 extended dash style, dual screw-in caps 424.95 1914-1864 1 2 extended dash stye with fuel gauge bung, single screw-in cap 429.95 FOR 00-03 FXST, FLST W/ CARB (EXCEPT FXSTD) 1914-1813 Dash stye with fuel gauge bung, screw-in cap 369.95 1914-1814 2 extended dash style with fuel gauge bung, single screw-in cap 419.95 FOR 00-06 FXST, FLST W/ CARB (EXCEPT FXSTD) 1914-1810 2 extended smooth top, center fill, single Aero cap 499.95 1 Requires the use of petcock adapter OEM# 62842-00 or Drag P/N 0705-0024 when used in listed carb applications. 2 Will not fit EFI models. 0701-0010 DS-390071 Side profile 0701-0001 MUSTANG GAS TANK Fat Bob-style, low-tunnel tank holds approximately 3.3 gallons Features a 3 /8 NPT-style petcock mount with two 1 /4 NPT crossover fittings Available as a single- or dual-cap design Measures 19 3 /4 L (including mounting tabs) x 11 1 /2 W x 7 1 /2 H (approximately) NOTE: Not for use on fuel-injected models. 0701-0001 W/ single cap $99.95 0701-0010 W/ dual cap 107.95 DS-390071 ONE-PIECE EXTENDED GAS TANKS Smooth-top tanks eliminate the dash completely and will require custom mounting of ignition switch, dash lights and speedometer Tank measures 22 1 /2 L by 16 W Aero caps are included with tank; screw-in caps are not included and must be purchased separately (use 82-E96 style caps) Includes all necessary hardware NOTE: 96-99 models require the use of pre-96 petcock. SMOOTH-TOP STYLE TANKS FOR 84-99 FXST, FLST DS-390071 With single screw-in cap $354.95 DS-390392 With single Aero cap 449.95 WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. DS-390392 885

Side profile 2107-1737 2107-1737 ONE-PIECE 2 EXTENDED GAS TANKS Gas tanks are fully functional; no dummy extensions 2 stretch over stock length; capacity is approximately 4.2 gallons Available in a smooth-top style for use with standard screw-in caps or with locking aero cap Aero cap included; screw-in gas caps sold separately (use 82-E96 style) Smooth top tanks require custom gauge mounting Accept late-style petcock (22mm) Come complete with all necessary mounting hardware NOTE: Seat nose may require modification. DS-391291 Side profile DS-390391 Side profile DS-391335 FOR 82-94, 99-00 FXR 2107-1737 Single locking Aero cap $439.95 DS-391335 Dual screw-in caps 357.95 DS-391331 Side profile DS-391291 DS-390391 DS-391331 886 EXTENDED TWO-PIECE FLAT-SIDE GAS TANKS 2 extended tanks are fully functional; no dummy extensions welded to rear of tank 4 extensions comprised of fully functional 2 extended tanks with additional 2 dummy extensions welded to the rear of the gas tanks Tanks come in a raw finish and accept stock-style speedometer and dash Contoured to fit around the nose of most seats (some seats may require modification) Available in 5.2-gallon style for use with standard screw-in caps Aero caps are included with tank Screw-in caps are sold separately (use 82-E96 style) Sold as a set NOTE: 96-99 models require pre-95 screw-in gas caps and petcock. NOTE: See section for custom seats and seat pans to fit with extended tanks. 2 EXTENDED TANKS FOR 84-99 FXST, FLST, 85-86 FXWG AND FXSB DS-391291 5.2-gal. tank for use with dual screw-in caps $349.95 DS-390391 5.2-gal. tank with Aero locking caps 499.95 DS-391237 Side profile DS-391238 Side profile FAT BOB-STYLE GAS TANKS Distinctive reproduction gas tanks constructed of drawn steel Manufactured to exact OEM specifications 4 EXTENDED TANK FOR 84-99 FXST, FLST, 85-86 FXWG AND FXSB DS-391331 5.2-gal. tank for use with dual screw-in caps $419.95 DS-391238 NOTE: Stock dash may need to be shimmed. NOTE: 96-99 models require the use of pre-95 gas caps and petcock. TANKS FOR USE WITH 82-E96 SCREW-IN GAS CAPS (SOLD SEPARATELY) FOR 84-99 FXST, FLST, 85-86 FX/FXWG DS-391237 3.5-gal. Flatside tank; repl. OEM #s 61218-85 (right side) and 61426-85 (left side) $229.95 DS-391238 5-gal. Flatside tank; repl. OEM #s 61211-84A (right side) and 61228-84 (left side) 229.95 DS-391234 6-gal. Flatside tank 299.95 WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.

0701-0187 FATBOB GAS TANKS 4.2 gallon tank bolts to stock frame Comes with mounting kit and hose line fittings PART #0701-0186 features a left side rear external outlet for stock petcock; PART #0701-0187 features a left side center external outlet for stock petcock Measures 19 1 /4 L x 14 1 /2 W x 8 D; hole-to-hole center line on mounting brackets measures 14 5 /8 NOTE: Paughco recommends all tanks be mounted on leather spacers or bushings. NOTE: All tanks are pressure-tested and are bare metal; fit before painting. DS-391231 Side profile 0701-0186 0701-0187 For 95-03 XL models $353.95 0701-0186 For 82-94 XL models 353.95 FAT BOB-STYLE GAS TANKS Fat Bob-style tanks accept stock dash, speedo equipment and standard late-model (22mm) Harley petcocks Available in 3 1 /2- or 5-gallon versions Gas caps sold separately FOR 82-E96 SCREW-IN GAS CAP STYLE TANK FOR 48-84 FX, FL AND CUSTOM FRAMES TO 84 DS-391236 5-gal. tank; repl. OEM #s 61213-83 and 61229-83 $215.95 DS-391322 DS-391322 Side profile DS-391236 FOR EARLY TWIST-LOCK GAS CAP STYLE TANKS FOR 48-84 FX, FL AND CUSTOM FRAMES TO 84 DS-391230 3 1 /2-gal. tank $182.95 DS-391231 5-gal. tank 199.95 EXTENDED DASH-STYLE RUBBER-MOUNT QUICKBOB TANK KITS Fully functional extended design, 2 longer than a standard Quickbob tank Allows the lines of the tank to flow into the lines of the seat for a great custom look Tanks have cutout in rear for seat nose (some seats may need to be modified) 95-03 tank kit includes a three-light dash for use with the OEM electronic speedo (except customs), 6-post Fat Bob ignition switch, ignition switch relocation bracket, coil bracket and a screw-in gas cap 82-94 tank kit includes a three-light dash, dash base, 2:1 ratio speedo with trip reset (68-84 style face), rubber dampener, a 6-post Fat Bob ignition switch and a screw-in gas cap All tanks come with necessary mounting brackets 3.9-gallon fuel capacity Utilizes a 22mm petcock NOTE: When this gas tank is installed on 92 or later models and the OEM continuous venting system is eliminated or disconnected, you may not reuse your stock vented cap, but may replace it with an earlier version of the screw-type caps. DS-391348 For 95-03 XL models (exc. 1200S model) $536.95 DS-391322 For 82-94 XL models 579.95 WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 887

DS-391352 Side profile EXTENDED SMOOTH-TOP GAS TANK Higher-capacity (approximately 4-gallon) 2 extended tanks Mounts to stock location; requires use of a custom seat to match rear tank cut-out Accepts a 22mm petcock and latestyle screw-in cap (sold separately) NOTE: Will require a custom seat; stock seat will not fit. 0701-0098 For 04-06 XL $335.95 DS-391351 EXTENDED SMOOTH-TOP QUICKBOB RUBBER-MOUNT GAS TANKS Extended design of these tanks allows the lines of the tank to flow into the lines of the seat for a great custom look 2 longer than a standard QuickBob tank Available in a single- or dual-gas cap style Tanks have cutout in rear for seat nose (some seats may need to be shortened) 82-03 tanks feature screw-in bungs (use 82-E96 style caps) 3.9-gallon capacity Utilize a 22mm petcock Each tank comes with necessary mounting brackets NOTE: When gas tanks are installed on 92 and later models and the OEM continuous venting system is eliminated or disconnected, you may not reuse your stock vented cap, but may replace it with an earlier version of the screw-type caps. NOTE: Will not fit 1200S models. DS-390077 FOR 82-03 XL MODELS (REQUIRES DS-390077 IGNITION COIL RELOCATION KIT; SOLD SEPARATELY) DS-391351 Twin-cap style gas tank $381.95 DS-391352 Single-cap style gas tank 381.95 DS-390077 Ignition relocation kit 21.95 DS-391272 Side profile DS-391273 888 DS-390396 RUBBER-MOUNT QUICKBOB GAS TANKS One-piece 3.6-gallon replicas of the Harley Fat Bob tanks Available with a complete dash assembly or in a smooth-top design Each style tank comes with rubber mount brackets and hardware Speedometer not included, but any of the FL-style speedos (except DS-243870) may be used with DS-391273 tank on 82-94 models only When ordering speedo, be sure to match existing speedo ratio with the one you re ordering PART #DS-391284 mount kit with dash allows the use of the OEM electronic speedometer on 95-03 models (except customs); also includes coil and ignition switch relocation brackets (PART #DS-391273 tank only) NOTE: When this gas tank is installed on 92 and later models and the OEM continuous venting system is eliminated or disconnected, you may not reuse your stock vented cap, but may replace it with an 82-E96 version of the screw-type caps. NOTE: Will not fit 1200S models. DS-390340 DS-391272 DS-390395 DS-391284 DS-391285 FOR 82-03 XL MODELS DS-390396 Smooth-top with Aero cap $429.95 DS-391272 Smooth-top for use with screw-in caps 341.95 DS-391273 Dash style for use with screw-in caps (requires DS-391284 for mounting on 95-03 models) 399.95 DS-391284 Dash kit for 95-03 OEM electric speedo 81.95 DS-391285 Repl. rubber mounting kit for 82-03 42.95 GAS TANKS WITH CHROME AERO-STYLE GAS CAP Rubber-mounted bolt-on style flat-bottom tank is made from heavygauge steel Reinforced seams and extra-strong mounting tabs Tank has a 3.3-gallon high-tunnel design to add fuel capacity without looking tall Features a chrome aero-style locking gas cap with keys Accepts a 22mm petcock (right side) NOTE: May require seat nose modification and relocation of ignition switch on some models. DS-390340 For 82-94 XL $236.95 DS-390395 For 95-03 XL 269.95 WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.

GAS TANKS Bolt-on gas tanks for XL models are made of heavygauge steel with reinforced seams Come complete with extra-strong mounting tabs 2.9-gallon tanks are 2 wider than stock tanks 3.3-gallon tanks have high-tunnel design so they add fuel capacity without looking tall 3.3-gallon tanks may require seat nose modifications PART #DS-391220 uses a 3 /8 NPT petcock, all others use 22mm; petcocks sold separately later in this section DS-391223 Side profile NOTE: When this gas tank is installed on 92 and later models and the Original Equipment continuous venting system is eliminated or disconnected, you may not reuse your stock vented cap, but may replace it with an earlier version of the screw-type caps. NOTE: 54-78, 82-94 tanks have petcocks on the right side, 95-03 tanks have petcock on left side. DS-391226 2.9-gallon rubber mount tank for 95-03 XL $169.95 DS-391225 2.25-gallon rubber mount tank for 95-03 XL 149.95 DS-391224 2.25-gallon rubber mount tank for 82-94 XL 149.95 DS-391223 2.9-gallon rubber mount tank for 82-94 XL $169.95 DS-391220 2.9-gallon for 54-78 XL 149.95 WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. DS-391225 SECTION 15 UNIVERSAL GAS TANK BASE For use with Lowlife and Hardlife frames Made from 16-gauge steel Allows fabricators to start with a radius base and tunnel to fit Lowlife or Hardlife chassis or any other chassis with radius backbone Includes four flush mounts, petcock and fuel crossovers TIG welded into place Use in conjunction with Universal Tank Mount PART #0704-0004 FAT BOB-STYLE GAS TANK CONVERSION MOUNTS Complete tank mount kit adapts new rubber-mounted flatside fuel tanks to 84 and earlier solid tankmounted frames Two of the mounts bolt on; rear mount requires welding Include all mounting hardware, grommets and instructions DS-391300 54-84 frames $65.95 1913-3015 GAS TANK MOUNTING HARDWARE KITS Custom chrome-plated mounting kits Available in acorn nut or flat head Allen styles ACORN NUT-STYLE W/ STUD 1913-3015 For 00-09 FXST/FLST models $9.95 1913-3016 For 84-99 FXST/FLST models 9.95 1913-3014 For 91-03 Dyna models 19.95 2401-0119 For 04-09 XL models 19.95 1913-3007 For 96-03 XL models 30.95 1913-3016 CUSTOM BOLT KIT FOR FLAT SIDE TANKS Chrome-plated hardware replaces front OEM gas tank mounting bolts Includes four 5 /16-18 x 3 /4 flathead Allen bolts with recessed washers 0704-0003 Universal tank base $539.95 CUSTOM MOUNTING KIT FOR FLATSIDE TANKS Kit includes mount brackets, rubber mounts, hose protector, chrome-plated beveled washers and mounting screws Can be used to update the stock mounting hardware or for new constructions 1913-3014 FLAT HEAD ALLEN-STYLE W/ COUNTERSUNK WASHERS 1913-3006 For 98-09 FLT models $11.95 1913-3013 For 91-99 FXST/FLST models 11.95 DS-391357 For all 91-99 Softail models $14.95 DS-391301 For 84 FXST, FLST and all 85-99 models w/ split tanks $52.95 2401-0119 UNIVERSAL TANK MOUNT KIT For use with Lowlife and Hardlife frames Extra-thick cross members feature rubber isolated tank mounts to absorb vibration Minor fitment, fabrication and welding required 0704-0004 Universal tank mount kit $129.95 1913-3007 1913-3006 1913-3013 889

CUSTOM ONE-PIECE GAS TANK MOUNTING KIT Kit includes front and rear tank mounts, rubber grommets and hardware DS-391648 For most aftermarket FXST, FLST one-piece tanks on 84-99 models $42.95 IGNITION RELOCATION KIT Makes installing a large tank a much simpler task Moves ignition switch from the right front of fuel tank to the left rear cylinder head Allows you to retain the original ignition switch cover Also included is a new chrome-plated ignition coil mounting bracket and hardware NOTE: Coil bracket will not work on 98-03 1200 Sport models. DS-390077 For 95-03 XL models; repl. OEM #s 31723-71A and 31727-85 $21.95 WELDLESS TANK BUNG Use when an alternative fuel source is needed, like when installing a nitrous oxide wet kit on fuel-injected motorcycles or as a fitting for an oil tank Requires a 9 /16 hole for mounting; will work with any tank up to 5 /8 wall thickness 1 /8 NPT internal thread size CNC-machined from billet aluminum; includes a high-quality Viton O-ring for a positive seal, a stainless steel nut and washer and an 80 micron filter 0705-0043 Weldless tank bung $41.95 0705-0039 890 0705-0034 0705-0035 0705-0040 PETCOCK BUNGS Weld-on tank bungs are available in 22mm male (stock on Harley-Davidson carbureted fuel tanks after 1975) or 3 /8 NPT female (stock on pre-1975 Harley-Davidson fuel tanks) Designed to be welded directly to the fuel tank Great for custom tanks or repairing stock tanks Sold each 3 /8 NPT 0705-0039 Steel $9.95 0705-0040 Aluminum 11.95 22MM 0705-0034 Steel 9.95 0705-0035 Aluminum 11.95 FUEL TANK MOUNTING GROMMETS Rubber mounting grommets from Genuine James Gaskets Sold in 12 packs DS-391241 For 84-99 Softail, 85-86 FX/FXWG with OEM gas tanks and most aftermarket Fat Bob gas tanks; repl. OEM #11447 $1.95 (ea.) GAS TANK GROMMETS Rubber grommet with metal sleeve Sold each to consumer; sold to dealer in packs of 10 DS-391240 For 85-86 FX, FXWG and 84-99 Softail OEM gas tanks and most aftermarket Fat Bobstyle gas tanks; repl. OEM #11447 (grommet) and 5775 (sleeve) $1.95 (ea.) FUEL TANK TAB TRIM Add some sizzle to your Sportster s fuel tank Show-chromed mounting tabs feature chromed fasteners that securely hold the tank in place and look great doing it Sold in pairs 0521-0228 For 96-03 XL w/ stock fuel tank $39.95 DS-280459 DS-280458 REPLACEMENT GAS TANK BUNGS Weld-in style bungs used for custom-mounting filler hole in fuel tanks Accepts 82-E96 screw-in gas caps Available in vented or non-vented styles Sold each DS-280458 Vented $7.95 DS-280459 Non-vented 7.95 FUEL TANK MOUNTING BUSHINGS Gooden-Tight tank bushings Injection-molded high-grade polyurethane with two-piece air-pocketed design Chemical-resistant, weather-proof, 0704-0006 0704-0007 0704-0008 won t crack, break down or damage sheet metal or paint Can be used to mount virtually anything that would normally be rubber mounted Two-piece busing design make for easy installation Aluminum bushing i.d. is 5 /16 FOR 84-99 FXST, FLST, 85-86 FX, FXWG 0704-0006 Polyurethane bushings only (10-pk.) $34.95 0704-0007 CNC-machined aluminum bushing inserts (6-pk.) 42.95 0704-0008 Aluminum bushing inserts and polyurethane bushing combo (10-pk.) 79.95 FUEL TANK MOUNTING GROMMET KIT Kit includes six rubber grommets and two steel sleeves One kit required for a set of tanks 1913-3005 84-99 FXST/FLST, 85-86 FX/FXWG $8.95 WELD-ON GAS TANK EXTENSIONS DS-391253 Economical way to get the look of stretched gas tanks Curved to match the tank s natural curves Do not increase gas tank capacity Extension for 84-99 flat-side tanks require a shortened seat nose For custom dashes that fit these extensions, see section 16 NOTE: Installation is recommended by experienced professionals only. If tanks have a sealer in them, installation will cause the sealer to peel from tank. Remember to pressure-check tanks before resealing and painting. DS-391253 3 for 3 1 /2-gallon 84-99 flat-side tanks $163.95 DS-391254 3 for 5-gallon 84-99 flat-side tanks 163.95 0701-0095 6 for all 5-gallon flat side tanks 183.95 0701-0096 6 for 00-07 Softail (except Deuce) 183.95 0701-0097 6 for 93-07 FL 183.95 0701-0096 0701-0097 0701-0095

0703-0058 0703-0059 POP-UP GAS CAPS Fit is nearly flush when closed; opens easily with just a quarter-turn of the center of cap Billet aluminum construction that is polished and chrome-plated Vented and non-vented styles available to fit early and late-model screw-in style tanks FOR L96-09 MODELS (EXCEPT 04-09 XL) 0703-0060 Vented $39.95 0703-0061 Non-vented 39.95 FOR 82-E96 MODELS AND 04-09 XL 0703-0058 Vented 39.95 0703-0059 Non-vented 39.95 MALTESE CROSS GAS CAPS Billet aluminum construction, then polished and chrome plated Vented and non-vented styles available Fit early and late-model screw-in style tanks FOR L96-09 MODELS 0703-0056 Vented $37.95 0703-0057 Non-vented 37.95 FOR 82-E96 MODELS 0703-0054 Vented 37.95 0703-0055 Non-vented 37.95 CHROME SCREW-IN LOCKING GAS CAPS Locking caps go a long way towards preventing theft or vandalism Sold each 0703-0054 7805-0319 7805-0318 0703-0056 L96-09 STYLE 7805-0320 Vented $16.95 7805-0321 Non-vented 16.95 82-E96 STYLE 7805-0318 Vented 16.95 7805-0319 Non-vented 16.95 0703-0200 0703-0199 GAS CAPS WITH PAINT PROTECTORS Chromed low-profile gas caps feature screw-in paint protectors and ratchet-action cap Available in vented, non-vented and dummy styles Vented cap has right-hand threads and can be used in either the right side of double-capped tanks or in single-cap tanks Non-vented cap has left-hand threads and is used only in the left side of double-capped tanks The dummy cap replaces the OEM fuel gauge in tanks that feature the fuel gauge in the left side; does not feature a fuel gauge Sold each; comes complete with installation tool for paint protector FOR L96-09 H-D MODELS 0703-0199 Vented, RH thread $59.95 0703-0200 Non-vented, LH thread 49.95 0703-0201 Dummy style, repl. fuel gauge 29.95 DS-390135 CHROME SCREW-IN GAS CAPS Feature a provision for evaporative emissions control equipment Available with or without a vent for 82-05 models; sold individually 0703-0201 L96-09 MODELS DS-390281 W/ vent; repl. OEM #61272-92A $13.95 DS-390282 W/o vent; repl. OEM #61103-83B 13.95 82-E96 MODELS DS-390135 W/ vent; repl. OEM #61102-83A 13.95 DS-390136 W/o vent; repl. OEM #61103-83B 13.95 DS-390130 DS-390194 ORIGINAL-STYLE GAS CAPS Replacement gas caps for OEM and custom tanks, available with or without a vent Both are chromed and feature stamped steel construction (will not fit screw-in type tanks) DS-390130 Gas cap w/ vent; repl. OEM #61102-73 $10.95 DS-390131 Gas cap w/o vent; repl. OEM #61103-73 10.95 DS-390193 Gas cap w/ vent; repl. OEM #61103-35 7.95 DS-390194 Gas cap w/o vent; repl. OEM #61103-65 7.95 0703-0228 0703-0229 SCREW-IN LOCKING GAS CAPS Locking cap discourages fuel theft or tampering Lock has a swing-away cover to keep dirt and debris out of the locking mechanism Come with two keys Sold each L96-09 MODELS 0703-0230 Vented $19.95 0703-0231 Non-vented 19.95 82-E96 MODELS 0703-0228 Vented 19.95 0703-0229 Non-vented 19.95 891

DELUXE GAS CAPS One-piece, die-cast gas caps are completely chrome-finished and feature Nytrel/cork seals Vented version has a check ball valve to prevent leakage DS-390118 Both caps fit any tank using pre-82, early-type twist-on gas caps (will not fit screw-in type tanks) DS-390118 Deluxe cap w/ vent $12.95 DS-390119 Deluxe cap w/o vent 12.95 DS-390134 DS-390148 LIVE TO RIDE GAS CAPS Complete thread-in gas caps feature the Live To Ride/Eagle Spirit insignia 3 diameter available in chrome or chrome with a gold insignia Sold individually FOR ALL 82-E96 MODELS DS-390134 Chrome vented cap $18.95 DS-390137 Chrome nonvented cap 18.95 DS-390147 Chrome w/ gold insignia vented cap 27.95 DS-390148 Chrome w/ gold insignia nonvented cap 27.95 Baby Moon 0703-0162 0703-0163 Peaked BILLET ALUMINUM GAS CAPS Screw-in vented caps sport the Roland Sands Design logo Available in black anodized Contrast Cut or chrome finish that matches the Roland Sands Design Vintage gas tank kit, seat, seat kit, fender kit and handlebars FOR L96-09 H-D MODELS 0703-0162 Black anodized $89.95 0703-0163 Chrome 89.95 DUMMY GAS CAP For bikes with the fuel gauge on the left side Designed to match the Ness-Tech Low Gravity Baby Moon-style gas caps Quality construction, chrome finish DS-390102 Baby Moon $47.95 Flamed NESS-TECH LOW GRAVITY Scalloped SCREW-IN GAS CAPS Chrome billet caps are so thin you can barely tell they re on the tanks Feature a narrow knurled edge with ratcheting action cap so removal is easy Available in various styles Sold individually FOR L96-09 MODELS DS-390198 Peaked vented $47.95 DS-390223 Peaked non-vented 47.95 DS-390224 Baby Moon vented 47.95 DS-390229 Baby Moon non-vented 47.95 DS-390238 Flamed vented 47.95 DS-390273 Flamed non-vented 47.95 FOR 82-E96 MODELS DS-390150 Peaked vented 47.95 DS-390152 Baby Moon vented 47.95 DS-390153 Baby Moon non-vented 47.95 DS-390158 Flamed vented 47.95 DS-390159 Flamed non-vented 47.95 0703-0223 Scalloped vented 47.95 892 0703-0159 0703-0160 GAS CAP FOR L96-09 MODELS 0703-0159 Chrome, non-vented $66.95 0703-0160 Black, non-vented 66.95 0703-0153 Chrome, vented 66.95 0703-0154 Black, vented 66.95 2105-0039 2105-0042 2105-0048 2105-0050 BILLET GAS CAPS AND INTERCHANGEABLE INSERTS Two-piece design allows you to mix and match chrome and black anodized gas caps and insets to create a unique look Machined out of 6061 T-6 billet aluminum Gas caps and inserts are sold separately CHROME INSERTS 2105-0039 Iron Cross $39.95 2105-0041 Flame 39.95 2105-0047 Smooth 39.95 2105-0049 Ball-milled 39.95 BLACK INSERTS 2105-0040 Iron Cross $39.95 2105-0042 Flame 39.95 2105-0048 Smooth 39.95 2105-0050 Ball-milled 39.95

0703-0067 Shown painted 0703-0066 0703-0254 GAS CAPS Chrome, black, brass or raw vented caps Available with weld-in bungs for custom applications or with OEM bung inserts for stock tanks WITH STEEL WELD-IN BUNG 7805-2021 Classic, raw $209.95 0703-0066 Classic, chrome 194.95 0703-0202 Classic, brass 229.95 0703-0251 Classic, black 194.95 0703-0067 Hot Rod, chrome 194.95 WITH STEEL WELD-IN BUNG (CONT) 0703-0203 Hot Rod, brass $229.95 0703-0252 Hot Rod, black 194.95 0703-0164 Flip-top, chrome 185.95 WITH L96-09 OEM BUNG INSERT 0703-0110 Classic, chrome 177.95 0703-0203 0703-0164 WITH L96-09 OEM BUNG INSERT (CONT) 0703-0111 Classic, raw $142.95 0703-0253 Classic, black 194.95 0703-0254 Hot Rod, black 194.95 0703-0165 OEM flip-top, chrome 238.95 Bandit PAINT PROTECTOR Renegade WITH BUILT-IN STAINLESS GAS CAP Fits all screw-in gas tanks Protects expensive paint jobs from fuel nozzle chips and gas vapors; upgrades the look with a custom gas cap Easy installation Paint Protector simply screws into gas tank and is locked down with the church key provided, then gas cap screws into the Paint Protector, completely covering it Two styles to choose from: Bandit with peaked design and Renegade with smooth-domed design Paint Protector sleeve is machined from 6061 T-6 aircraft-quality billet aluminum; gas caps are machined from solid billet 303 stainless steel; all parts are polished Sold in pairs (one vented, one non-vented) or individually (one vented) FOR L96-09 MODELS DS-390081 Bandit gas cap (ea.) $50.95 DS-390080 Bandit gas caps (pr.) 100.95 DS-390083 Renegade gas cap (ea.) 50.95 DS-390082 Renegade gas caps (pr.) 100.95 FOR 82-E96 MODELS LMGC1041A Bandit gas cap (ea.) 50.95 LMGC1041 Bandit gas caps (pr.) 100.95 LMGC1042A Renegade gas cap (ea.) 50.95 LMGC1042 Renegade gas caps (pr.) 100.95 STAINLESS STEEL THIN GAS CAPS CNC-machined from 303 stainless steel Hand polished to a brilliant shine Available in two styles Sold in pairs (one vented, one non-vented) or individually (one vented) Bottle opener series comes with a Landmark gas cap key Renegade BOTTLE OPENER SERIES Less than 3mm above the tank FOR 82-E96 MODELS DS-390180 Renegade (pr.) $83.95 DS-390181 Renegade (ea.) 44.95 KNURLED SERIES Less than 4mm above the tank FOR L96-08 MODELS DS-390020 Renegade (pr.) $83.95 DS-390022 Bandit (pr.) 83.95 Knuried series Bottle opener series Renegade Bandit Bandit FOR 82-E96 MODELS (CONT) DS-390182 Bandit (pr.) $83.95 DS-390190 Repl. gas cap key 4.95 FOR 82-E96 MODELS DS-390170 Renegade (pr.) $83.95 DS-390171 Renegade (ea.) 44.95 DS-390172 Bandit (pr.) 83.95 2107-1500 0703-0063 BILLET GAS CAPS Constructed from a solid piece of 6061 billet aluminum Chrome-plated to show standards Replace stock vented and nonvented caps Crusader Maltese Cross cap has matching points cover, derby cover and inspection cover also available Sold each 0703-0236 0703-0235 FOR L96-09 STYLE TANKS 2107-1500 Warrior vented, chrome $43.95 0703-0063 Maltese vented, chrome 48.95 0703-0064 Maltese non-vented, chrome 48.95 0703-0220 Maltese vented, black 44.95 0703-0221 Maltese non-vented, black 44.95 0703-0235 Smoothie vented, chrome 49.95 0703-0236 Smoothie vented, black 49.95 0703-0237 Smoothie non-vented, chrome 49.95 0703-0238 Smoothie non-vented, black 49.95 FOR 82-E96 STYLE TANKS 0703-0239 Smoothie vented, chrome 49.95 0703-0240 Smoothie vented, black 49.95 0703-0241 Smoothie non-vented, chrome 49.95 0703-0242 Smoothie non-vented, black 49.95 DS-390038 DS-390039 FLUSH-MOUNT GAS CAPS High-tech look of aviation-style fuel fillers Simply screws into the stock opening in your gas tank Keyed entry permits the low profile and prevents unauthorized entry Outer rings prevent chips around gas opening Available in vented and non-vented styles for 83 and later screw-in style tanks (L96-09 tanks will require reusing the stock gas cap gasket) Sold each U.S. Patent #400838. DS-390038 Vented Fat Bob-style (right-hand thread) $49.95 DS-390039 Non-vented Fat Bob-style (left-hand thread) 49.95 0703-0219 Repl. key for DS-390038, DS-390039 3.95 893

0703-0247 SPOKE GAS CAPS Machined from billet aluminum Chrome finish Comes with steel weld-in bung For custom applications only 0703-0247 Non-vented $214.95 0703-0248 Vented 214.95 0703-0243 DEAD END GAS CAPS Machined from billet aluminum Chrome finish Comes with steel weld-in bung For custom applications only 0703-0245 0703-0243 Smooth, non-vented $214.95 0703-0244 Smooth, vented 214.95 0703-0245 Notched, non-vented 214.95 0703-0246 Notched, vented 214.95 0703-0209 POP-UP GAS CAP Features a weld-in, stainless steel bung with a pop-up aluminum gas cap Measures 2 3 /8 dia. 0703-0113 Flush mount gas cap $157.95 POP-UP CAP Pop-up vented gas cap assembly is available in steel construction Weld-in style, for custom applications 301170 Pop-up w/ steel bung $83.95 0703-0213 GAS CAPS AND BUNGS All styles are CNC-machined from billet aluminum Vented and non-vented caps available Caps with HD-style bung adapter fit 82-E96 right-hand screw-in style tanks Caps with weld-in bungs are for custom applications Bungs available separately for use with Covington gas caps NON-VENTED GAS CAPS WITH BUNG 0703-0206 Spoke cap, chrome, w/ steel weld-in bung $179.95 0703-0207 Spoke cap, raw, w/ steel weld-in bung 159.95 0703-0211 Sprocket cap, chrome, w/ weld-in steel bung 159.95 0703-0212 Sprocket cap, raw, w/ weld-in steel bung 139.95 VENTED GAS CAPS WITH BUNG 0703-0208 Spoke cap, chrome, w/ steel weld-in bung 179.95 0703-0209 Spoke cap, chrome for 82-E96 right-hand screwin style gas tanks 199.95 0703-0210 Spoke cap, raw, w/ steel weld-in bung 159.95 0703-0213 Sprocket cap, chrome, w/ weld-in steel bung 159.95 0703-0214 Sprocket cap, chrome for 82-E96 right-hand screw-in style gas tanks 199.95 0703-0215 Sprocket cap, raw, w/ steel weld-in bung 139.95 GAS TANK BUNGS 0703-0216 Aluminum weld-in bung for custom aluminum tank applications 27.95 894 ZOMBIE GAS CAP Leak-proof and oh so small Weld-in unit drops into any steel tank for a minimalist look Dimensions: bung measures 1.5 dia.; cap measures 1 3 /4 dia. 0703-0065 Zombie vented gas cap $115.95 KUSTOM KNOCK-OFF GAS CAP Latest additon to Chopper Inc. s Six Gun series.44 magnum bullets design Polished billet three-bar cap with steel weld-in bung O-ring sealed and vented For custom applications Made in U.S.A. 0703-0104 Knock-off custom gas cap $194.95

1914-1525 AERO GAS CAPS Replacement gas caps for Drag Specialties gas tanks that accept Aero caps Include keys, gasket and bolts 1914-1526 DS-390062 DS-390051 DS-390052 1914-1525 120mm vented (ea.) $65.95 1914-1526 95mm vented (ea.) 58.95 1914-1527 95mm non-vented (ea.) 58.95 1914-1528 95mm one vented/one non-vented (pr.) 115.95 DS-390066 4250AE 4250AEB DS-390054 4250AG A26S TBV45 DS-390060 FLUSH-MOUNT GAS CAPS Aircraft-style flush-mount polished gas caps are available in 2 1 /4 and 3 diameters 2 1 /4 diameter caps come with or without key locks Available in vented and non-vented versions Feature weld-in or bolt-in style bungs Bolt-in styles include bolts and nut plates, except PART #DS-390060 by Custom Cycle Engineering DESCRIPTION NON-LOCKING LOCKING WELD-IN STEEL BUNG 2 1 /4 dia. vented DS-390050 $158.95 DS-390062 $183.95 2 1 /4 dia. non-vented DS-390051 158.95 DS-390063 183.95 3 dia. vented DS-390052 167.95 - - WELD-IN ALUMINUM BUNG 2 1 /4 dia. vented DS-390054 158.95 - - BOLT-IN ALUMINUM BUNG 2 1 /4 dia. vented DS-390058 167.95 DS-390066 175.95 2 1 /4 dia. non-vented DS-390059 167.95 DS-390067 175.95 3 dia. vented DS-390060 171.95 - - FLUSH-MOUNT GAS CAPS Top-quality aircraft-style flush-mount gas caps from Newton Aluminum bolt-in cap kits come with mounting hardware Vent converter TBV45 converts all Newton caps to vented; available separately 4250AE 3 non-locking polished $179.95 4250AEB 3 non-locking black 179.95 4250AG 3 locking polished 187.95 A26S 1 1 /2 non-locking polished 159.95 TBV45 Vent valve converter 47.95 FLUSH-MOUNT LOCKING CAPS For use with Drag Specialties gas tanks that accept flushmount gas caps DS-390069 DS-390079 Gas cap set (one vented, one non-vented) $50.95 DS-390069 Vented gas cap (ea.) 27.95 DS-390127 DS-390126 LIVE TO RIDE /EAGLE SPIRIT GAS CAP COVERS Gas cap covers are a great way to detail a bike Available with a detailed chrome or gold-plated eagle/banner with the Live to Ride and the Eagle Spirit script recessed into each part Covers are held on by special adhesive tape and include one left- and one right-hand eagle emblem Sold in pairs FOR MOST 73-09 MODELS DS-390127 Gold $44.95 DS-390126 Chrome 21.95 DS-390196 DS-390191 DS-390192 DS-390167 PAINT SAVER PLUS BY CARLINI Easier-to-install Paint Savers use a nitrile rubber vapor seal Same highly polished stainless steel parts as the original Paint Savers Protects tank from being chipped or scratched when filling with gas May even conceal paint damage already present Available for standard filler necks and dummy filler necks with the fuel gauge Sold individually DS-390196 Paint Saver ring for L96-09 smooth-top tanks $29.95 DS-390191 Paint Saver Plus ring for 82-E96 tanks w/ welded lip 29.95 DS-390192 Paint Saver Plus ring for fuel gauge to match DS-390191 29.95 DS-390167 Paint Saver Plus ring for bayonet gas caps 29.95 895

ROUND SERIES Finned Wave Smooth Grooved Lightning Diamond Flamed Flag HEX SERIES FInned Smooth Oval Flag Hose outlet facing forward Hose outlet facing backward Hose outlet facing inward 896 POWER-FLO FUEL VALVES Valves feature a brass body with show-quality chrome plating Substantially higher fuel flow compared to OEM or aftermarket fuel valve Necessary for adequate fuel delivery even on stock motorcycles and a must for high performance Available for 75 and later models with a 22mm external thread, or pre-75 tanks internally threaded for 3 /8 NPT Adapter nut included on 22mm threaded valves Patents apply NOTE: All descriptions are made from a seated position on the motorcycle with a reference from outlet position to the reserve position of the fuel valve lever. DESCRIPTION 22MM ROUND 22MM HEX 3 /8 NPT ROUND 3 /8 NPT HEX DESCRIPTION 22MM ROUND 22MM HEX 3 /8 NPT ROUND 3 /8 NPT HEX 90 OUTLET FACING FORWARD 180 OUTLET FACING INWARD (CONT) Smooth DS-390240 DS-390231 DS-390245 DS-390209 Smooth DS-390260 DS-390235 DS-390265 DS-390211 Grooved DS-390241 - - - Grooved DS-390261 - - - Lightning DS-390242 - - - Lightning DS-390262 - - - Diamond DS-390243 - - - Diamond DS-390263 - DS-390268 - Flamed DS-390244 - - - Flamed DS-390264 - - - 90 OUTLET FACING BACKWARD Oval - DS-390510 - - Smooth DS-390250 DS-390233 DS-390255 - Smooth (down outlet) - DS-390237 - DS-390213 Grooved DS-390251 - - - Flag 2107-0000 2107-0001 Lightning DS-390252 - - - CHROME ADAPTER NUTS FOR 75-06 HD Diamond DS-390253 - DS-390258-3 /8 NPT x 22mm Flamed DS-390254 - - - (approximately 7 /8 ) - - DS-390208 DS-390208 180 OUTLET FACING INWARD 22mm to 22mm Finned DS-390506 DS-390509 - - (approximately 7 /8 ) 0705-0082 0705-0082 - - Wave DS-390507 - - - PRICE LIST PART # 0705-0082 $22.95 2107-0000 110.95 2107-0001 110.95 DS-390208 24.95 DS-390209 98.95 DS-390211 98.95 DS-390213 112.95 DS-390231 110.95 DS-390233 110.95 PART # DS-390235 $110.95 DS-390237 124.95 DS-390240 110.95 DS-390241 110.95 DS-390242 110.95 DS-390243 113.95 DS-390244 110.95 DS-390245 98.95 DS-390250 110.95 PART # DS-390251 $110.95 DS-390252 110.95 DS-390253 113.95 DS-390254 110.95 DS-390255 98.95 DS-390258 101.95 DS-390260 110.95 DS-390261 110.95 DS-390262 110.95 DS-390231 PART # DS-390263 $113.95 DS-390264 110.95 DS-390265 98.95 DS-390268 101.95 DS-390506 110.95 DS-390507 110.95 DS-390509 110.95 DS-390510 110.95

HIGH-FLOW FUEL VALVE WITH CUSTOM ROUND KNOB Custom knob features a detent for positive on position with ball-milled grooves that gives the valve a nice grip and a custom look Substantially higher fuel flow than OEM or aftermarket fuel valves Very universal; will work in any tank location Valve features a brass body with show-quality chrome plating Easy-to-read on, off and reserve positions 0705-0033 22mm round; 180 outlet facing inward $115.95 VACUUM FUEL VALVE Has the highest fuel flow of any vacuum-style fuel valve on the market The same safety feature as OEM vacuum fuel valves when valve is left in the on position with the motor off, fuel flow is shut off automatically High-quality, lustrous chrome finish is the same as Pingel s Power-Flo line of fuel valves Fits all 94-06 stock applications with 22mm external thread Will also fit 75-93 models if a vacuum source is tapped Outlet is a single 5 /16 hose barb and will accept the stock vacuum line NOTE: All descriptions are made from a seated position on the motorcycle with a reference from outlet position to the reserve position of the fuel valve lever. HEX STYLE 2107-0002 Left side mount, outlet facing forward; or right side mount, outlet facing back $178.95 2107-0003 Left side mount, outlet facing back; or right side mount, outlet facing forward 178.95 2107-0004 Universal configuration, outlet facing down 178.95 ROUND STYLE 0705-0083 Left side mount, outlet facing forward; or right side mount, outlet facing back 178.95 0705-0084 Left side mount, outlet facing back; or right side mount, outlet facing forward 178.95 0705-0085 Universal configuration, outlet facing down 178.95 IN-LINE CUSTOM FUEL VALVE Designed with the bike builder in mind Eliminates the need to worry about fuel valve location Simple on/off valve without reserve or filter 2107-0002 0705-0032 In-line fuel valve $82.95 FUEL VALVE REBUILD KIT Designed to rebuild Pingel 3 /8 NPT and 22mm single-outlet valves PART #DS-390225 includes all the special tools necessary, photos, instructions and enough components to rebuild three fuel valves PART #DS-390226 includes enough components to rebuild five fuel valves; does not include any of the tools A bench vise or press with a 6 1 /2 or larger opening is necessary for installing a rebuild kit DS-390225 0705-0085 NOTE: These kits are not designed for hose outlet down, dual or triple outlets, 1 /4 NPT or race valves. Pingel recommends these valves be sent directly to them for rebuilding. DS-390226 DS-390225 Fuel valve rebuild kit, complete $62.95 DS-390226 Fuel valve rebuild components only 75.95 CHOPPER VALVE Designed for use on bikes with custom fuel tanks that are raised high in front, which doesn t allow proper fuel pickup with a standard reserve fuel valve Keeps the bottom of the tank clean from fuel lines, giving universal options for mounting the fuel valve with mounting holes on the back of the valve Smooth, clean lines with a compact design that measures 1 1 /2 H x 2 L x 1 3 /8 D Easy-to-operate position selector knob with a ball detent for positive on/off/reserve locating Two straight out 5 /16 hose outlets Requires two hoses to be routed from the tank: one for on and one for reserve Provides exceptional fuel flow to feed the thirstiest big-inch motors CNC-machined from billet brass, polished and chromed 0705-0042 Chopper valve $195.95 POWER-FLO -6AN FUEL VALVE 0705-0058 Chrome-plated solid brass hex-design petcock features a -6AN outlet For use with S&S E and G series carbs Fitting sold separately DS-390285 For 75 and later model tanks with 22mm external threads $141.95 0705-0058 For pre-75 models and custom tanks with 3 /8 NPT fitting 111.95 DS-289141-6AN fuel fitting 33.95 0705-0051 0705-0029 THE GUZZLER FUEL VALVES This is a serious fuel valve for serious riders Hardcoat anodized billet aluminum and stainless steel construction Spring-loaded detents for DS-390501 positive on-off positioning; no reserve available Flows up to 211 ounces of fuel per minute DS-289141 0705-0028 DS-390285 DS-390504 Available with 3 /8 NPT or 22mm outlets (all single outlets 0705-0047 face down) Some styles available highly polished for that custom look 22MM POLISHED 0705-0049 Dual 90 5 /16 outlets $171.95 0705-0050 Single -6AN outlet 165.95 0705-0051 Single 5 /16 outlet 155.95 0705-0052 Single 3 /8 outlet 155.95 22MM DS-390503 Dual 90 5 /16 outlets 173.95 0705-0029 Single -6AN outlet 144.95 DS-390504 Single 5 /16 outlet 155.95 DS-390505 Single 3 /8 outlet 155.95 3 /8 NPT POLISHED 0705-0047 Single 5 /16 outlet 142.95 0705-0056 Single -6AN outlet 154.95 3 /8 NPT DS-390501 Dual 90 5 /16 outlets 159.95 0705-0028 Single -6AN outlet 132.95 DS-390502 Single 5 /16 outlet 141.95 5 /16 INLINE POLISHED 0705-0057 Single 5 /16 outlet 132.95 897

0705-0014 0705-0015 0705-0089 0705-0016 0705-0019 0705-0017 0705-0018 0705-0020 0705-0021 0705-0022 0705-0061 0705-0064 0705-0023 CLICK-SLICK PETCOCKS Manufactured from 360 brass and stainless steel ball bearings and components; available in either a chrome or raw brass finish Features detents for quick, effortless switching from On to Reserve to Off 90 movement between each detent ensures positive transition when riding Stainless steel internal ball bearings provide virtually friction-free petcock handle motion Valve position firmly held in place and unaffected by vibration Can be modified to fit custom tanks and/or be set to determine amount of reserve gas available with any custom gas tank 3 /8 NPT CHROME 0705-0014 Backward facing $107.95 0705-0015 Downward facing 107.95 0705-0016 Forward facing 107.95 0705-0017 Straight facing 107.95 0705-0018 6-AN 114.95 3 /8 NPT RAW BRASS 0705-0086 Backward facing 107.95 3 /8 NPT RAW BRASS (CONT) 0705-0087 Downward facing $107.95 0705-0088 Forward facing 107.95 0705-0089 Straight facing 107.95 22MM CHROME 0705-0019 Backward facing 107.95 0705-0020 Downward facing 107.95 0705-0021 Forward facing 107.95 22MM CHROME (CONT) 0705-0022 Straight facing $107.95 0705-0023 6-AN 114.95 22MM RAW BRASS 0705-0061 Backward facing 107.95 0705-0062 Downward facing 107.95 0705-0063 Forward facing 107.95 0705-0064 Straight facing 107.95 0705-0002 0705-0003 FUEL PETCOCKS 0705-0004 Hi-flow petcocks feature a round, smooth body with a chrome finish Three-position knob (on, off, reserve) with a 5 /16 fuel outlet Fits most stock tanks and custom tanks with a 22mm outlet 0705-0002 Inward facing outlet $74.95 0705-0003 Down facing outlet 74.95 0705-0004 Forward facing outlet 74.95 PETCOCK Constructed from triple show-chrome plated brass Features an adjustable 360 swivel outlet and clicking detent that allows for accurate and universal positioning Significantly outflows stock and modified petcocks NOTE: Not for fuel-injected models. 0705-0081 For stock and custom tanks with a 22mm outlet $79.95 898 DS-390216 HIGH-FLOW FUEL VALVE WITH SWIVEL SPIGOT Chrome fuel valve from Accel is designed to replace all right, left and rear spigot applications Unique design that incorporates a banjo-type spigot with a 180 swivel onto a high-flow fuel valve with a 22mm nut Fuel outlet nipple is 5 /16 NOTE: Won t fit 3 /8 NPT thread tanks. 5106 High-flow fuel valve w/ swivel spigot $100.95 DS-390217 DS-390218 DS-390219 HIGH-FLOW CHROME PETCOCK Features on, off and reserve with an easy-to-use knob, 5 /16 barbed fuel outlet and a fine wire-mesh screen Valve has 3 /8 NPT threads and comes with the 3 /8 NPT to 22mm adapter nut Fits all fuel tanks with 22mm outlet 5105 Accel high-flow petcock w/ nut $80.95 CHROME PETCOCKS Includes filter screen, three-position control and high fuel flow Available with 3 /8 NPT or 22mm thread fittings, straight or 90 outlet All are sold each 3 /8 NPT DS-390216 For stock H-D gas tanks through 74 or custom tanks; straight x 5 /16 rib spigot $21.95 DS-390217 For stock H-D gas tanks through 74 or custom tanks; 90 x 5 /16 rib spigot 21.95 DS-390214 For stock H-D gas tanks through 74 or custom tanks, straight x 5 /16 rib spigot 21.95 22MM DS-390218 Straight spigot; repl. OEM #s 62166-81, 62168-81 21.95 DS-390219 90 spigot; repl. OEM #62167-81 21.95

Back view 0705-0005 Front view FUEL TANK SELECTORS Custom-mounts the fuel valve at any location Ideal for custom builds and choppers where the bottom of the fuel tank shows Keeps fuel tank bottom clear of hoses or the petcock; allows you to get all the fuel out of raised front or stretched tanks by running hoses from the very low end of the fuel tank Needs two fuel hoses routed from gas tank: one for on and one for reserve (hoses sold separately) 0705-0005 Tank selector w/ face plate $222.95 0705-0059 Tank selector w/ one-hole bracket 245.95 0705-0060 Tank selector w/ two-hole bracket 245.95 FUEL VALVE ADAPTER Allows the mounting of any 22mm Pingel fuel valve on Buell models Bolts in place of the stock fuel valve A must for modified motors that need a higher-flow-rate fuel valve Fuel valve must be purchased separately FUEL TANK OUTLET PLUG Use to plug the outlet on fuel tanks that use either the fuelinjection or petcock adapter Also for use on aftermarket fuel tanks that have dual fuel outlets, but only one is required for use Polished chrome finish Includes O-ring seal Fits OEM and aftermarket fuel tanks that accept petcock adapter OEM #62842-00 (Drag PART #0705-0024) GAS VALVE Shut-off rod and seat assembly; features a left tank reserve NOTE: Fits earlier models if Linkert gas line is changed to 50-65 style. DS-390205 For 50-65 Big Twin models; repl. OEM #62033-41 $33.95 FUEL LINE FITTING COVER Streamlined, two-piece cover adds a touch of chrome Front view 0705-0027 For all 95-02 Buell models, except fuel-injected models $29.95 0705-0054 Fuel tank outlet plug $14.95 0706-0037 For fuel-injected 01-07 Softails, 02-07 FLT, FLHT and FLHR fuel-injected models and 04-07 fuel-injected Dyna models $39.95 PETCOCK COVER Highly decorative chrome cover offers a unique custom look Large hex knob provides easy operation Installs quickly over OEM petcock Fits 81-01 OEM petcocks DS-390359 Petcock cover $29.95 0705-0059 Back view CUSTOM PETCOCK COVERS Highly detailed, die-cast construction Designed for sidemount flat lever OEM-style petcocks Held in place by a stainless setscrew Available in gold or chrome finish BIG TWIN VALVE ADAPTER Offers better fuel flow and retains the stock crossover connection of your 35-65 Harley-Davidson split fuel tanks Don t let the stock fuel valve be the main jet the stock fuel valve setup simply cannot support the fuel demands of today s high-performance engine Stainless steel gas tank adapter and any 22mm threaded Pingel Power-Flo or Guzzler fuel valve (sold separately) will drastically improve your fuel supply 0705-0053 For 35-65 Big Twin split fuel tanks $42.95 TANK FITTING KIT FOR FUEL-INJECTION TO CARBURETOR CONVERSION Use when converting from OEM fuel-injection systems to use a carburetor in order to deliver adequate fuel for large-displacement engines Kit replaces the factory tank fittings, allowing the use of a high-quality, high-flow Pingel fuel valve to feed the carburetor Made of stainless steel Kits include adapter and plug or adapter only with O-rings or gaskets See Pingel fuel valves on page 896 NOTE: Due to tight tolerances in the tank fittings, a Pingel fuel valve is the only one that will fit. PART # DESCRIPTION 0705-0031 For 00-03 models w/ Delphi EFI (adapter and plug) $42.95 0705-0055 For 00-09 models w/ Delphi EFI (adapter only) 24.95 0705-0030 For 95-01 FLT/FLHT models w/ Magneti Marelli EFI (adapter and plug) 42.95 PETCOCK ADAPTER Allows the use of a 22mm petcock in a fuel tank designed for Delphi fuel injection Original equipment in 01-06 FXSTD Deuce, 03-06 Dressers and 04-06 Softail carbureted bikes Includes O-ring for a leak-proof seal Accepts any petcock that installs using a 22mm nut Chrome-plated finish for great looks 0705-0024 Petcock adapter; repl. OEM #62842-00 $16.95 GAS VALVE FITTING KIT Chrome-plated valve fitting kit is designed to use flexible hoses GOLD DS-390516 Eagle for 81-01 OEM petcock $50.95 CHROME DS-390360 Skull w/ chrome eyes for 81-01 OEM petcock 46.95 DS-390361 Skull w/ ruby eyes for 81-01 OEM petcock 57.95 0705-0055 0705-0030 Stock valve Stock valve w/ adapter NOTE: Not for Linkert carb. DS-193807 Stock 35-65 FL models (also fits Drag Specialties repl. gas valves) $20.95 DS-390516 DS-390360 0705-0011 0705-0012 CHROME (CONT) 0705-0010 Skull for 02-06 OEM petcock $57.95 0705-0011 Skull w/ ruby for 02-06 OEM petcock 68.95 0705-0012 Skull for Pingel petcock 57.95 0705-0013 Skull w/ ruby for Pingel petcock 68.95 SECTION 15 899

IN-LINE FUEL FILTERS Pingel high-flow custom fuel filters are available in aluminum machined satin or chrome finish Filters have a high-quality O-ring for a leak-proof seal Cleanable, reusable 40 micron filter element 1 3 /16 body length; 1 1 /2 o.d. Works great with Pingel s high-volume gas valves 0707-0005 0707-0008 DS-391662 DS-391666 0707-0005 3 /8 aluminum machined satin finish fuel filter (ea.) $28.95 0707-0006 3 /8 aluminum chrome finish fuel filter (ea.) 34.95 0707-0007 -6AN aluminum machined satin finish fuel filter (ea.) 38.95 0707-0008 -6AN aluminum chrome finish fuel filter (ea.) 44.95 DS-391662 5 /16 chrome fuel filter (ea.) $38.95 DS-391663 5 /16 aluminum machined satin fuel filter (ea.) 32.95 DS-391666 Repl. 40 micron bronze filter element w/ O-ring (ea.) 12.95 DS-391103 PEAK FLOW FUEL FILTERS Machined from 6061 T-6 billet aluminum, then polished and chrome-plated Filter element is made from pleated 304 stainless steel; filters down to 10 microns and still flows 6 gal. a minute Mini filter body measures 1 3 /4 L; super mini body measures 7 /8 L (less fittings) Replacement filter element available MINI FILTER DS-391102 1 /4 fittings $46.95 DS-391103 5 /16 fittings 46.95 DS-391104 3 /8 fittings 46.95 DS-391105 #4 AN fittings $46.95 DS-391106 #6 AN fittings 46.95 DS-391105 DS-391101 SUPER MINI FILTER DS-391100 1 /4 fittings $43.95 DS-391101 5 /16 fittings 43.95 DS-391107 Repl. filter element (ea.) 14.95 900 ANODIZED FUEL FILTERS Premium-quality custom Russell fuel filters with alloy cases and replaceable bronze elements Compact size for easy installation; available in two sizes and several colors 45000 1 /4, chrome $15.95 45010 1 /4, red 15.95 45020 1 /4, blue 15.95 45030 1 /4, black 15.95 45060 5 /16, chrome 15.95 14-34450 14-34460 UNIVERSAL FUEL FILTERS Sizes to fit 1 /4 or 5 /16 fuel lines Glass fuel filters have glass body with chrome end caps; include hose clamps and spare nylon filter element Metal high-performance fuel filters feature brass filter element, all-metal casing and hose clamps 45070 5 /16, red $15.95 45080 5 /16, blue 15.95 45090 5 /16, black 15.95 DS-391708 Repl. fuel filter element 6.95 14-34450 5 /16 glass filter $8.95 14-34460 5 /16 metal filter 7.95 14-34451 1 /4 glass fuel filter 8.95 14-34461 1 /4 metal filter 7.95 14-34455 Repl. filter (10-pk.).95 (ea.) ANODIZED ALUMINUM FUEL FILTERS Customize and protect with the same filter CNC-machined aluminum outer case Cleanable brass filter element inside Available in 1 /4 and 5 /16 sizes 14-34470 Red 1 /4 $7.95 14-34471 Blue 1 /4 7.95 14-34472 Black 1 /4 7.95 14-34473 Purple 1 /4 7.95 14-34474 Gold 1 /4 7.95 DS-391673 DS-391671 CLEAR FUEL FILTERS Glass filters feature chrome ends Available in two inlet sizes 1 /4 or 5 /16 i.d., and in mini (1 3 /8 ) and standard (2 3 /8 ) lengths Replacement filter elements available MINI FILTERS DS-391673 1 /4 inlet $10.95 DS-391671 5 /16 inlet 10.95 DS-391674 14-34430 Red 5 /16 $7.95 14-34431 Blue 5 /16 7.95 14-34432 Black 5 /16 7.95 14-34433 Purple 5 /16 7.95 14-34434 Gold 5 /16 7.95 DS-391672 DS-391675 DS-391676 STANDARD FILTERS DS-391674 1 /4 inlet $10.95 DS-391672 5 /16 inlet 10.95 REPLACEMENT ELEMENTS DS-391675 Short $2.95 DS-391676 Long 2.95

FUEL-INJECTION LINES Huge upgrade over the drab stock kit Lines are stainless steel braided Chromed hard line and fittings resistant to all chemicals found in gasoline HDFL005 Fuel-injection line for 95-99 FLHTCU-I, 98-99 FLHRC-I, 98-99 FLTR- I, 96-99 FLHTC-I, 96 FLTCU-I, 96-97 FLHR-I $159.95 STERLING CHROMITE II FUEL TANK CROSS-OVER LINES Only Sterling Chromite II uses the patented technology to create an exclusive braid that looks like chrome Perfectly matches color and weave of all other Magnum Sterling Chromite II cables and lines High-quality clear covering won t discolor and makes cleaning easy Polished chrome-plated ends Complete compression-style line assemblies Unique design eliminates leaks 0706-0005 FUEL TANK CROSSOVER LINES Replaces the stock rubber lower crossover lines with stainless steel lines Seals with compression fittings for a positive seal 0706-0016 CROSSOVER LINES 0706-0007 For 97-09 FLT/FLHT models $26.95 0706-0004 For 00-09 FXST/FLST models (except Deuce) 26.95 0706-0005 For 00-07 FXSTD 26.95 0706-0006 For 86-99 FXST/FLST models 28.95 0706-0003 For 93-05 Dyna models 26.95 REPLACEMENT WASHER 0706-0016 For fuel lines (6-pk.).95 PART # FITS MODEL LENGTH INCLUDING FITTINGS 0706-0024 86-99 Softail 11 1 /2 $44.95 0706-0025 00-09 Softail (except Deuce) 5 1 /2 44.95 0706-0026 00-07 FXSTD 7 44.95 0706-0027 97-09 FLT/FLHT/FLHR 10 1 /2 44.95 0706-0028 03 Dyna 5 1 /4 44.95 0706-0029 04-09 Dyna 5 3 /4 44.95 CUSTOM FUEL LINE CROSSOVER KIT Braided stainless steel, 9 long Allows equal gas flow to both sides of tank 1 /8 pipe thread fittings to tank and -3 chrome AN 90 hose ends For use with custom tanks that have 1 /8 NPT bungs in the bottom of the tank 0706-0008 Crossover kit $44.95 7807-0103 FUEL LINE CROSSOVER FOR CUSTOM TANKS Stainless steel braided #3 line Two chrome 90 fittings For use with custom tanks Available in 6 or 9 lengths 0706-0059 6 $28.95 0706-0060 9 29.95 DS-096648 FUEL LINE CROSSOVERS Braided stainless steel hose features 5 /16 i.d. for maximum fuel flow Attach to crossover tubes with compression fittings for a positive seal no more worm gear clamps 0706-0010 For 99-05 Dyna, 5 3 /4 $41.95 0706-0011 For 86-99 FXST/FLST, 10 3 /4 39.95 0706-0012 For 00-09 FXST/FLST, 5 1 /2 (except FXSTD) 34.95 0706-0031 For 00-07 FXSTD 33.95 0706-0030 For 97-09 FLT 41.95 DS-096648 Universal stainless steel crossover fuel line (not for FXR and Dyna) for 1 /4 outlets, 11 1 /2 45.95 DS-222617 Repl. seals for crossover fuel line (6-pk.) 7.95 7807-0104 0710-0041 7807-0102 STAINLESS BRAIDED HOSE AND 6-AN HOSE ENDS Designed to work with Pingel Power-Flo fuel valve PART #DS-390285 or any other fuel valve with a 6-AN fitting Black anodized 6-AN Swivel-Seal hose ends are available in straight or 90 styles Auto-Flex stainless hose is available in 3-ft. lengths Hose ends and hose sold separately 7807-0102 Auto-Flex stainless hose $25.95 7807-0103 Straight Swivel-Seal hose end (ea.) 11.95 7807-0104 90 Swivel-Seal hose end (ea.) 36.95 SMOOTH-STYLE CUSTOM OIL TANK Bolt-on oil tank with a custom wraparound look is easily installed Made of chromed-finish, heavygauge steel Conveniently located drain and chrome filler cap Battery opening measures 7 3 /8 L x 4 3 /16 W x 5 9 /16 D Features a 3.5 quart capacity with Softail-type oil line fittings and a two-piece front mounting bracket for easy installation Requires PART #DS-245262 drain plug DS-310231 Oil tank for 65-86 FX/FL $324.95 DS-245262 Chrome hex-head drain plug, 1 /8 NPT 2.95 0710-0040 CUSTOM OIL TANKS 3.5 quart capacity oil tanks in a chrome finish Features a 1 /4 pipe feed and return and 1 /8 pipe vent Center fill design Measures 6 in dia. and 11 1 /2 W FOR 84-99 FSXT/FLST 0710-0040 Round $295.95 0710-0041 Domed 295.95 901

OIL TANK 4-qt. oil tank for Pro-Maximus frame Raw finish 0710-0004 Oil tank $506.95 WINGED TOP MOUNT OIL TANK Available with a standard internal feed Has a raw finish and a top center filler hole For use in custom applications DS-360432 Winged standard feed oil tank $487.95 WINGED FXST/FLST OIL TANK Fat Guy winged oil tank for custom frames Also fit stock 84-99 FXST/ FLST models with minor modification (frame plate must be notched for center fill hole) 12 5 /8 wide Raw finish FOR CHOPPER GUYS FXST/FLST AND RIGID FRAME KITS DS-360265 Winged standard internal feed oil tank $487.95 CHOPPER-STYLE OIL TANK Features a top-mount design with internal feed lines 3 1 /2-qt. raw finish tank has a flat bottom, with plenty of room for the starter Fits all Chopper Guys Rigid frames and custom applications 0707-0002 Chopper-style oil tank $487.95 0710-0021 0710-0022 CUSTOM OIL TANKS Chrome-plated steel construction Includes mounting tabs Available in side or center fill Domed ends Designed with built-in battery box FOR 84-99 FXST, FLST AND CUSTOM RIGID FRAMES 0710-0021 Center fill $319.95 0710-0022 Side fill 319.95 CENTER-FILL WINGED OIL TANK Features chrome finish and a winged design that fills the gap between the tank and frame Includes filler cap and drain plug DS-310232 For 89-99 Softail models $199.95 DS-310109 902 CHROME WINGED OIL TANK Winged design fills in the gap between tank and frame Features a side-fill design oil spout Includes oil filler cap and drain plug DS-310113 For 89-99 Softail models $214.95 CHROME OIL TANK Features a side-fill design Includes oil filler plug DS-350150 DS-310109 Oil tank for 89-99 Softail models; repl. OEM #62498-89A $199.95 DS-350150 Repl. oil filler plug (ea.) 7.95

CHROME OIL TANKS A duplicate of the original equipment black oil tank, but this is highly polished and chrome-plated for exceptional looks Includes filler cap 0710-0046 For 97-03 XL: repl. OEM #62475-97/62888-99 $149.95 DS-310119 For 94-96 XL; repl. OEM #62475-94 144.95 DS-310102 For 83-93 XL; repl. OEM #62475-83 133.95 DS-310102 DS-310119 FXR OIL TANK Formed steel construction with a chrome finish Bolt-in application; uses OEM mounts Fittings, clamps and hoses included NOTE: Cap not included; must be purchased separately. 0710-0003 For 86-94 FXR and most aftermarket FXR frames $133.95 OIL TANK Replacement chrome oil tank comes with drain/fill plugs, cap assembly and gasket DS-310108 For 65-E82 FX, FL; repl. OEM #62483-81 $167.95 0710-0015 0710-0013 OVAL ALUMINUM OIL TANKS Available with center- or side-fill holes Feature a built-in battery box that measures 7 L x 4 W Accept 1 /8 NPT fittings (sold separately) Mount in the same manner as a FXST/FLST oil tank NOTE: Filler cap not included; uses 84-99 FXST/FLST-type cap. FOR LEFT-SIDE DRIVE 84-99 CUSTOM FXST/FLST/ RIGID FRAMES (11.5 W) 0710-0013 Retro finish, center fill $969.95 0710-0015 5 round, smooth, center fill 655.95 OIL FILLER HOUSING KIT Chrome die-cast aluminum housing Comes complete with fitting, gasket, hardware and rubber hose Converts 93-98 breather style to late-model method of breathing Uses OEM dipstick 7805-3032 For 93-06 FLT, FLHT; repl. OEM #s 62419-93, 62470-02 $49.95 0710-0028 FOR 00-09 FXST/FLST MODELS EXCEPT 08 FXCW/FXCWC (OEM REPLACEMENT) 0710-0027 Smooth, side fill $969.95 0710-0028 Maltese Cross, side fill 969.95 903

1105-0028 PLUS ONE OIL PAN Reduces engine oil temperature by 10 degrees on an 80 degree day Multiple integral baffles eliminate the stock plastic baffle with springs Baker +1 pan has the feed located in the rear and the return in the front for a more complete system circulation Structurally located integral boss for Alloy Art TXR stabilizer 2-piece is constructed of billet aircraft grade 6061 T-6 aluminum 1-piece pans are Cast A356 T-6 and available in silver or black FOR 99-08 FLT/FLHT/FLHR/FLHX/FLTR MODELS 1105-0025 2-piece billet; chrome $999.95 1105-0027 1-piece; silver 499.95 1105-0028 1-piece; black 499.95 FOR 93-98 FLT/FLHT/FLHR/FLHX/FLTR MODELS 1105-0026 2-piece billet; chrome $999.95 1105-0029 1-piece; silver 499.95 1105-0030 1-piece; black 499.95 OIL TANK BRACKET SET Replace the dull front and rear oil tank bracket on your late-model Softail with these chrome brackets NOTE: Rear bracket requires 5 /16-24 x 5 /8 bolts to mount on 93-99 models. DS-310255 For 84-99 Softail; repl. OEM #62704-84 (rear), 62707-84 (front) $26.95 OIL TANK-TO-FENDER BRACKET Chrome bracket mounts horseshoe-type oil tanks to rear fenders on hardtail and custom frames Sold individually PART # DS-310298 DESCRIPTION Tank-to-fender bracket; repl. OEM #62585-36 $6.95 OIL TANK EDGING TRIM Replacement-type, chrome edging trim DS-310225 For 71-86 FX and FXB and 65-84 FL and FLH; repl. OEM #62534-65 $11.95 904 VIBRATION MOUNTS For battery boxes, oil tanks or custom parts Meet or exceed all OEM specifications 2404-0032 Repl. OEM #69123-92; features two 5 /16-18 studs, each 1 /2 long $7.95 DS-350145-PK Repl. OEM #62563-65; /4-20 threaded studs and steel side plates; for mounting battery boxes and oil tanks (5-pk.) 2.95 0710-0002 0710-0001 OIL DIPSTICKS Billet machined aluminum with a chrome finish Caps feature knurled edges to allow a good grip Plastic dipsticks have all required markings Come with sealing gaskets 0710-0001 For 91-98 FXD; 93-98 FXDWG, repl. OEM #62685-95A $38.95 0710-0002 For 93-98 FLT/FLHT; repl. OEM #s 62640-93, 62607-93 25.95 TOP OIL TANK BRACKET GROMMET Rubber grommet with metal sleeve Sold each to the consumer; sold to dealers in packs of 10 DS-391240 Repl. OEM #s 11447 (grommet) and 5775 (sleeve) $1.95 (ea.) DS-330039 OIL PLUG TEMP GAUGE Sensitive to oil temperatures up to 350 F Chrome gauge bezel DS-330039 For all 00-09 FXST/FLST models $28.95 DS-330033 For 84-99 FXST, FLST; 82-94 FXR; 80-92 FLT; 79-01 XL (2 3 /4 L) 28.95 DS-330031 For FX, FL, FXWG (3 7 /8 L) 28.95 0710-0047 For 04-09 XL 55.95 LCD OIL TEMPERATURE GAUGES Billet aluminum with liquid crystal display Push-button readout with automatic shutoff 0710-0033 For 00-09 FXST, FLST $89.95 7805-3042 For 84-99 FXST, FLST 89.95 7805-3030 For 84-03 XL models 89.95 DS-330033 DS-330031 0710-0047 7805-3030

OIL PLUG Billet aluminum oil plug matches 1.5 pop-up gas cap Fits most stock and custom side-fill tanks 0710-0032 Maltese Cross, black powder-coat $99.95 CHROME OIL TANK CAP Chromed steel cap fits OEM oil tanks DS-350151 Oil tank cap for 65-E82 Big Twin and 52-78 XL; repl. OEM #62610-52A $33.95 DS-174813 Oil tank top gasket for 66-82 Big Twin; repl. OEM #62628-66 (10-pk.) ALUMINUM DIPSTICK CAPS CNC-machined aluminum six-gun oil caps.44 magnum style 0710-0005 Replace the sleeve that comes with the stock cap so dipstick can still be used 1 7 /16 i.d. Available in polished or anodized black finish FOR 91-05 DYNA GLIDES AND MODELS 0710-0005 Polished $74.95 0710-0012 Anodized black 106.95 DEAD END OIL DIPSTICK COVER OEM replacement Notched design 1.95 (ea.) DS-350151 0710-0012 0710-0066 For 99-06 Touring and FLHR models $36.95 ALUMINUM OIL TANK PLUGS CNC-machined aluminum six-gun oil caps.44 magnum style Available in polished push-in style 0710-0006 For 00-09 FXST/FLST; measures 1 5 /16 dia. $50.95 0710-0007 For 65-99 HD (except FLT and Dyna) and most aftermarket tanks, measures 1 3 /16 dia. 50.95 TRIDENT OIL FILLER CAP Die-cast cap is chrome plated Replaces the stock black oil cap Easy to install and use 0710-0048 For 93-06 Touring models and 99-05 Dyna models $29.95 0710-0061 0710-0049 OIL DIPSTICK CAPS Chrome-plated CNC-machined aluminum Attach to the existing dipstick; replace the OEM aluminum cap Grooved relief allows easy removal of the dipstick FOR 00-09 FXST/FLST 0710-0061 Warrior $67.95 0710-0062 Ball milled 67.95 0710-0059 Reflections 67.95 0710-0049 Crusader Cross 67.95 0710-0006 0710-0062 0710-0007 0710-0059 7805-0066 FOR 99-07 FLHT/FLTR/FLHR MODELS (1.5 I.D.) 7805-0066 Nasty $34.95 SECTION 15 OIL LINE ADAPTER Simplifies installation of rubber or braided lines Mirror-polished 316 stainless steel Sold each 0711-0083 For all Twin Cam B motors $54.95 0711-0157 0711-0158 OIL LINE FITTING KITS For installation of custom oil lines on Twin Cam B motors Available in chrome or black finish Use with Russell stainless or black oil lines for a professional look Accepts custom oil lines with AN6 and AN8 fittings 0711-0157 Black $28.95 0711-0158 Chrome 29.95 OIL LINE ADAPTERS Let you connect rubber or braided oil lines to your engine Work like compression fittings so no ugly hose clamps are visible Sold as a set of 3 0711-0059 For all Twin Cam B motors $139.95 OIL TANK LINE FITTINGS Chrome-plated oil line fittings are exact duplicates of original types Can be used with braided stainless steel or stock rigid steel lines Sold in packs of three DS-193814 36-64 Big Twin models $13.95 905

DS-245263 CHROME MOTOR CASE BREATHER FITTINGS Highly polished and plated fittings Sold each DS-245264 DS-245265 FOR ALL 65-92 BIG TWIN MODELS DS-245263 Straight 1 /4 NPT x 3/8 hose $3.95 DS-245264 90 1 /4 NPT street elbow (must use w/ PART #DS-245263) 5.95 DS-245265 45 1 /4 NPT street elbow (must use w/ PART #DS-245263) 7.95 DS-245250 DS-245257 DS-245259 DS-245200 DS-245205 DS-245270 DS-245252 DS-245274 DS-245258 DS-245260 DS-245261 HOSE AND TANK FITTINGS Chrome finish; sold individually DS-245200 45 elbow, 1 /8 male NPT to 1 /8 female NPT, for oil tanks, master cylinder, etc. $5.95 DS-245205 90 elbow, 1 /8 male NPT to 1 /8 female NPT, for oil tanks, pressure gauges, etc. 4.95 DS-245250 SAE inverted flare male connector, 3 /16 o.d. tube to male 1 /8 NPT, for H-D brake lines, etc. 2.95 DS-245252 3 /8 union, to splice oil lines, cooler installations, etc. 4.95 DS-245256 SAE inverted flare 90 male elbow, 3 /16 o.d. tube to male 1 /8 NPT, for H-D brake lines, etc. 4.95 DS-245257 SAE inverted flare 45 male elbow, 3 /16 o.d. tube to male 1 /8 NPT, for H-D brake lines, etc. 5.95 DS-245278 SAE inverted flare female connector, 3 /16 o.d. to female 1 /8 NPT, for H-D brake lines, etc. 4.95 DS-245258 Male 90 hose connector, 3 /8 hose to male 1 /8 NPT, for oil tanks, coolers, etc. 7.95 DS-245259 Male 90 hose connector, 5 /16 hose to male 1 /8 NPT, used on oil tanks, gas tanks, etc. 6.95 DS-245260 Male 90 hose connector, 1 /4 hose to male 1 /8 NPT, for oil tanks, coolers, etc. 6.95 DS-245270 Male hose connector, 1 /4 hose to male 1 /8 NPT, for oil tanks, custom fuel tanks, etc. 3.95 DS-245272 Male hose connector, 5 /16 hose to 1 /8 male NPT, for oil tanks, coolers, etc. 3.95 DS-245274 Male hose connector, 3 /8 hose to 1 /8 male NPT, for oil tanks, coolers, etc. 3.95 DS-245261 Hex socket plug, 3 /8 male NPT, for H-D petcocks, etc. 3.95 DS-245276 Hex socket plug, 1 /8 male NPT, for custom petcocks, etc. 2.95 0711-0116 0711-0117 DS-245272 0711-0118 HOSE AND TANK FITTINGS Steel with a black chrome finish Sold each DS-245276 DS-245278 0711-0116 45 fitting, 1 /8 male NPT to 1 /8 female NPT $16.95 0711-0117 Straight Barb fitting, 1 /8 male NPT to 3 /8 female NPT 13.95 0711-0118 90 fitting, 1 /8 male NPT to 1 /8 female NPT 14.95 0711-0126 0711-0127 0711-0130 0711-0131 0711-0129 906 OIL TANK BREATHER KITS Releases power-robbing pressure from oil tank and crank case; reduces blow-by and stops dipstick blowout Promotes proper oil flow and oil tank function Braided steel lines and stainless steel fittings; breather line coated with clear PVC Gasket, thread sealant, necessary hardware and installation instructions included FOR 99-05 DYNA MODELS 0711-0126 1 Stainless $120.95 0711-0127 1 Black 130.95 FOR 02-08 FLT MODELS 0711-0130 Stainless 189.95 0711-0131 Black 189.95 FOR 99-01 FLT MODELS 0711-0128 2 Stainless $120.95 0711-0129 2 Black 130.95 1 Requires removal of transmission/oil tank cover for installation. 2 Requires removal of dipstick housing for installation.

DS-246010 DS-246050 SECTION 15 STAINLESS STEEL BRAIDED ROCKER OIL LINES Stainless steel braided oil line sets are leakproof and designed for high-pressure applications Each set includes crossover and crankcase-to-rocker box lines DS-222132 DS-222133 DS-222132 For 66-84 Shovelhead $23.95 DS-222133 For 57-85 XL 26.95 CHROME ROCKER OIL LINES Chromed steel overhead oil line sets include crossover line and crankcase-to-rocker box line Complete with fittings and seals, which are also available separately DS-246005 DS-246010 Overhead oil line sets for 66-84 Shovelhead $16.95 DS-246005 Overhead oil line sets for 57-85 XL 16.95 DS-246050 Oil line tube fitting for 66-84 Shovelhead; 57-85 XL (ea.) 4.95 DS-174310 Oil line seals (ea.).95 0711-0035 STAINLESS STEEL BRAIDED OIL LINE KITS Direct replacements for OEM oil lines Compression and NPT fittings are chrome-plated Replacement washers are sold in 6-packs OIL LINE KITS 0711-0036 For L92-99 FXST/FLST models (4-line kit) $126.95 0711-0035 For 90-E92 FXST/FLST models (6-line kit) 173.95 0711-0034 For 87-89 FXST/FLST models (4-line kit) 146.95 0711-0042 For 92-98 Dyna models (3-line kit) 112.95 0711-0038 For 91-94 FXR models (5-line kit) 153.95 0711-0037 For 87-90 FXR models (4-line kit) 153.95 0711-0041 For 94-03 XL models (3-line kit) 112.95 0711-0040 For 91-93 XL models (4-line kit) 146.95 0711-0039 For 86-90 XL models (5-line kit) 126.95 REPLACEMENT WASHER 0711-0063 For oil lines (6-pk.).95 PRO SYSTEM INDIVIDUAL OIL LINES Designed for applications when a stock oil line kit won t work Feature pre-assembled, individual 3/8 i.d. braided stainless steel Teflon oil lines with rubber compression fittings Fit most standard 3/8 single-barb oil fittings Length given is the overall length, including the fittings Replacement seals for compression fittings available separately PART # LENGTH DS-222601 8 $29.95 DS-222602 9 29.95 DS-222603 10 29.95 DS-222604 11 30.95 DS-222605 12 30.95 DS-222606 13 31.95 DS-222607 14 31.95 DS-222608 15 32.95 DS-222609 16 32.95 DS-222610 17 33.95 DS-222611 18 33.95 DS-222612 20 34.95 0711-0063 PART # LENGTH DS-222613 22 $35.95 DS-222614 24 36.95 DS-222615 26 37.95 0711-0076 28 37.95 0711-0077 30 37.95 0711-0078 32 38.95 0711-0079 34 39.95 0711-0080 36 40.95 DS-222616 Repl. compression fitting seals (12-pk.) 17.95 OIL LINE KITS Oil line kits feature top-quality range of chrome steel screw-in fittings that replace existing OEM parts Provide exceptional performance and attractive look Eye-catching components are crimped onto stainless steel braided PTFElined hose, which eliminates the need for bulky, awkward hose clamps HDOL201 For 92-99 Softail $158.95 HDOL205 For 86-91 Softail 257.95 HDOL208 For 92-98 FXD 190.95 HDOL210 For 86-91 FXR 232.95 HDOL214 For 99-01 FLHT/FLHR/FLTR 216.95 HDOL211 For 94-98 FLH/FLT 183.95 HDOL212 For 84-89 FLT/FLHT 206.95 OIL LINE KITS Engineered to replace stock hoses and outdated clamps Designed to fit OEM oil tanks, but may work on aftermarket tanks Finished in high-luster chrome HDOL201 50002 For L92-99 FXST, FLST $167.95 50001 For 90-E92 FXST, FLST 244.95 50000 For 87-89 FXST, FLST 199.95 50003 For 87-90 FXR 211.95 50010 For 92-98 Dyna 205.95 50009 For 94-03 XL 149.95 OIL LINE HOSE KIT Oil hose feed kit for Softail bikes Built with stainless steel hose and crimped on chrome ends PART # DESCRIPTION 0711-0081 For 00-09 FXST/FLST models $56.95 907

0711-0046 UNIVERSAL STAINLESS STEEL BRAIDED OIL LINES Available in various lengths for any custom application Include 1 /8 NPT chrome compression fittings for easy installation Measured overall, including fittings 0711-0043 8 $26.95 0711-0044 9 27.95 0711-0045 10 27.95 0711-0046 11 28.95 0711-0047 12 28.95 0711-0048 13 25.95 0711-0049 14 29.95 0711-0050 15 30.95 0711-0051 16 31.95 0711-0122 0711-0052 17 31.95 0711-0053 18 32.95 0711-0054 20 33.95 0711-0055 22 34.95 0711-0056 24 35.95 0711-0057 26 36.95 0711-0063 Replacement seals sold in 6-pk..95 (ea.) 0711-0110 0711-0111 0711-0112 0711-0113 0711-0114 0711-0115 0711-0119 0711-0120 0711-0121 UNIVERSAL BRAIDED OIL HOSE AND FITTINGS Oil hose is made from black braided nylon that resists abrasion and corrosion; contains a secondary CPE style rubber liner with a nylon inner braid Very flexible yet will not collapse under extreme heat Use with -6 full flow hose ends and adapter fittings (sold separately) Fittings and ends are constructed of lightweight black anodized aluminum Hose ends feature a 37 angled sealing surface for a positive anti-leak seal 11 /32 OIL HOSES 0711-0122 6 $47.95 0711-0123 10 77.95 0711-0124 20 150.95 HOSE ENDS 0711-0110 -6, straight 12.95 0711-0111 -6, 45 swivel tube end 33.95 0711-0112 -6, 90 swivel tube end 34.95 0711-0125 -6, compression 19.95 ADAPTER FITTINGS 0711-0113 -6 x 1 /8, 45 flare to pipe 22.95 0711-0114 -6 x 1 /8, flare to pipe 5.95 0711-0115 -6 x 1 /8, 90 flare to pipe 13.95 0711-0119 -6 x 1 /4, flare to pipe 5.95 0711-0120 -6 x 1 /4, 90 flare to pipe 14.95 0711-0121 -6 x 1 /4, 45 flare to pipe 13.95 600-06 HD0100CH UNIVERSAL OIL LINE AND -6 COMPONENTS Premium-quality reusable oil line components Chrome steel fittings and Teflon hose are offered individually, so you can build the kit to suit your needs Fittings are used with our stainless steel braided PTFE-lined hose to provide optimal performance for any Big Twin 600-06 -6 stainless steel hose, 12 $117.95 HD0100CH Tank stub fitting 24.95 HD0103CH Straight 1 /8 NPT 24.95 HD4503CH 45 1 /8 NPT 36.95 HD9003CH 90 1 /8 NPT 36.95 HD-WASHER-6 Repl. oil line washer kit, 6-pack 8.95 0711-0138 0711-0151 UNIVERSAL OIL LINES AND FITTINGS Premium stainless steel braided hoses are available with female chromed steel swivel fittings that fit the universal chrome oil line fittings (sold separtately) Featuring durable PTFE hose liners NOTE: Oil line lengths are determined by measuring the distance between the flares of the female swivel fittings. OIL LINES 0711-0133 6 $39.95 0711-0134 7 39.95 0711-0135 8 40.95 0711-0136 9 41.95 0711-0137 10 41.95 0711-0138 11 42.95 0711-0139 13 43.95 0711-0140 14 44.95 HD4503CH 0711-0150 HD0103CH HD9003CH OIL LINES (CONT) 0711-0141 15 $45.95 0711-0142 17 46.95 0711-0144 19 48.95 0711-0145 20 47.95 0711-0146 21 49.95 0711-0147 24 51.95 0711-0148 26 51.95 FITTINGS 0711-0149 Straight 1 /8 NPT adapter $7.95 0711-0150 Straight 1 /4 NPT adapter 7.95 0711-0151 45 1 /8 NPT adapter 13.95 0711-0152 45 1 /4 NPT adapter 13.95 0711-0153 90 1 /8 NPT adapter 13.95 0711-0154 90 1 /4 NPT adapter 13.95 908 1204-0030 TWIN CAM VENT LINES Replace unsightly stock crankcase-to-oil tank vent line High-luster chrome finish 1204-0031 Match other Russell Pro System braided lines 1204-0030 For 99-05 Dyna $32.95 1204-0031 For 02-06 FLHT, FLHR, FLTR 62.95 0711-0082 For 99-01 FLHT, FLHR, FLTR 41.95 0711-0032 CRANKCASE VENT LINE Highly chromed steel construction Replaces the rubber OEM crankcase-to-oil tank line Includes fittings for easy installation 0711-0033 0711-0032 For 02-06 FLT; repl. OEM #45808-02 $49.95 0711-0033 For 93-06 FLT w/ Baker 6-speed transmission or conversion 59.95

0713-0042 0712-0030 0713-0042 0713-0045 OIL FILTER/OIL COOLER Filtration system designed to be used as an additional filter along with stock oil filter Drastically reduces contamination and viscosity breakdown Protects engine from cylinder/piston/ring/bearing wear, cylinder bore polishing and extreme oil temperatures Mounts above voltage regulator between frame rails to take advantage of air flow off front tire 0712-0103 Includes filter/cooler housing and mounting bracket, off-set oil filter adapter, braided steel lines and swivel fittings, spin-on oil filter and all necessary hardware CHROME 0713-0042 For 99-08 FXST/FLST and Dyna (except 06-08 Dyna Low Rider) $498.95 0713-0043 For 06-08 Dyna Low Rider 498.95 0713-0044 For 99-08 FLHT, FLHR, FLTR 498.95 BLACK CHROME 0713-0045 For 99-08 FXST/FLST and Dyna (except 06-08 Dyna Low Rider) 498.95 0713-0046 For 06-08 Dyna Low Rider 498.95 0713-0047 For 99-08 FLHT, FLHR, FLTR 498.95 REPL. OIL FILTER W/ O-RING 0712-0103 For Feuling Oil Filter/Oil Cooler 22.95 PHANTOM OIL FILTER KIT High-quality billet aluminum hidden oil filter system includes a weld-in and a bolt-in flange For horseshoe-style oil tanks installed in aftermarket Softail or Rigid style frames Cleans up front of motorcycle Changing filter is easy; no messy drain pans, no oil running down the front of your motorcycle and no wrenches needed Premium aircraft grade hardware, O-ring seals and complete instructions included NOTE: 2 1 /2 of flat surface area required; drilling and cutting required for installation NOTE: Will not fit center fill oil tanks. NOTE: Will not fit stock Softail models without modifications made to frame above oil tank. 0712-0030 Oil filter kit $229.95 10-28300 Repl. oil filter 3.95 DS-275035 DS-275031 SPIN-ON FILTER-COOLER KIT Polished billet aluminum filter housing with stainless mounting plate Mounts directly to any 3 /4-16 spin-on filter mount Provides oil cooling with easy oil filter changes Includes all necessary seals plus three high-efficiency replacement filters DS-275031 For 92-09 FLHT, 91-09 FXD, 92-09 FXST/FXR, 84-09 XL; replaces oil filter OEM #s 63731-99, 63813-90, 63796-77A, 63805-80, 63805-83 $190.95 DS-275032 Repl. O-ring and flow valve kit for DS-275031 4.95 DS-275112 Repl. oil filter (ea.) 8.95 OIL FILTER CANISTER/OIL COOLER External oil filter canister is made of polished and lacquered cast aluminum Comes with chromed brass hose fittings, machined aluminum cap with O-ring seal, 7 of 3 /8 oil line, four hose clamps and four tie-wraps Mounting hole size is 5 /16 and center-to-center is 1 3 /8 DS-275035 Perf-form filter canister $173.95 DS-275115 Repl. filter 8.95 FILTER CANISTER MOUNT Chrome mounting bracket allows easy horizontal mounting of any Perf-form filter canister over the voltage regulator in front of the engine Bolts to left front footpeg and kickstand frame lug ; sold individually DS-275040 Perf-form filter canister mount for 70-86 FX, FXST, FXWG and FL models $35.95 909

CHROME OIL FILTER/ REGULATOR MOUNT.250 machined-from-billet plate with oil passageways Predrilled to accept regulator Mounts to front motor mount Comes with mounting hardware and fittings and uses PART #s DS-275113/117 filter DS-190781 For 75-99 FX models $108.95 EXTERNAL OIL FILTER HOUSING A chromed replica of the oil filter that came stock on 40-57 Big Twin models Great for a restoration or for custom Shovelhead applications Replacement paper oil filter available separately DS-275100 DS-275100 Remote filter housing for 40-57 Big Twin and custom Shovelhead applications $57.95 DS-275202 Repl. filter 5.95 OIL FILTER MOUNTING BRACKET KIT Polished billet oil filter mounting bracket for Twin Cam engines was specially designed and created for the S&S 124 Twin Cam engines, but makes a great cosmetic and functional upgrade for engines built with stock Twin Cam crankcases as well No voids or other casting defects in the material to cause leaks Position of the filter has been shifted slightly to give additional clearance between the filter body and the crankcase for easier filter installation and removal Also machined to make it easy to install an oil cooler in the pressure-side of the system; if a cooler is not needed, simply install the pipe plugs in the threaded holes in the filter bracket, instead of the hose fittings 0712-0059 99-06 Twin Cam (except 06 Dyna) and all S&S T-series motors $133.95 BILLET OIL FILTER MOUNT Designed to mount directly to the engine case Conceals oil lines, clamps and fittings for a clean look Machined from billet aluminum and chromed to a mirror finish Fits Evo engines with mounting bosses in the engine case Comes complete with mounting bolts and fittings to accept 3 /8 oil hoses 0712-0038 For 92-99 80 Big Twins $232.95 0712-0036 DS-190479 BILLET OIL FILTER MOUNT Chrome-plated billet aluminum mount replaces cast OEM oil filter mount Available in a smooth or ball-milled style Tapped for 1 /4 NPT fittings (sold separately) Oil lines must be ordered separately FOR 92-99 FXST/FLST, FXR AND 91-98 DYNA GLIDE MODELS (OEM #26378-92/26381-92) 0712-0036 Smooth $165.95 DS-190479 Ball-milled 165.95 910 SLIMLINE BILLET OIL FILTER MOUNT Chrome-plated 1 /2 -thick billet aluminum mount with 3 /8 external fittings Provides a low-cost, slim oil filter mount FOR 92-99 80 BIG TWIN MODELS 0712-0035 Slimline $99.95 CHROME OIL FILTER MOUNT Designed to replace the OEM cast mount Includes oil filter adapter Mounts with OEM hardware 11 /16 threads accept OEM hard lines DS-275107 For all 92-99 Big Twin Evolution models; repl. OEM#26378-92A/26381-92A $42.95 CHROME BILLET OIL FILTER MOUNT Available in a smooth design Accepts OEM oil lines and hard line fittings DS-190771 For 92-99 Evolution Big Twin $169.95 CUSTOM OIL FILTER MOUNT Chrome filter mount features 3 /8 fittings and may be used with stainless steel or rubber lines Accepts all types of oil filters DS-275104 For 92-99 80 Evolution Big Twin models $39.95

DELUXE OIL LINE NACELLE COVER Blankets the area between the cam cover and the transmission Covers the oil lines and the exposed clutch cable where it enters the transmission cover Easily installed 0711-0155 For 07-09 FXST/FLST $69.95 OIL LINE NACELLE COVER Die-cast chrome cover dresses up the area between the cam cover and transmission Stock chrome oil lines exit through the cover for a high-tech appearance 0940-0495 For 00-06 FXST/FLST models $59.95 OIL HOSE COVER Brighten an unfinished area on stock bikes Die-cast aluminum with a beautiful chrome finish Includes mounting hardware 0940-0439 For 99-06 FLHT/FLHR/FLTR; repl. OEM #37946-99 $39.95 OIL LINE COVER/ SHROUD Oil lines disappear under a luscious layer of chrome Also covers the rough-cast area around the transmission Easy installation DS-305020 For 99-05 FXD $59.95 1902-0024 For 02-06 FLT 89.95 DS-305021 For 99-01 FLHR, 00-01 FLT 69.95 OIL LINE COVER Chrome two-piece cover hides that plain rubber oil line beneath the right side of your oil tank 0711-0058 For 00-06 FXST/FLST models $39.95 DS-305020 1902-0024 CHROME BILLET ALUMINUM OIL DRAIN Unique drain mounts cleanly and easily to the rear of the transmission mounting plate Utilizes existing OEM hardware (mounting bolt and hose clamp) Works on stock bikes as well as those running wide tires with offset transmissions Includes barbed oil line fitting and hex drive pipe plug DS-310241 For 86-99 FXST/FLST models $42.95 DS-310243 DS-310245 OIL FILTER DRAIN TRAYS Tired of hot oil running down your oil filter and all over your bike and floor? Once the filter has been loosened, these unique drain trays fit underneath the oil filter and against the filter mount to direct the oil into your catch pan not all over your bike or the floor Manufactured from a carefully selected polymer to resist chemical attack and dimensional distortion from the hot oil Easy to keep clean, and small enough to take with you on that long trip Indispensable in any shop, home garage or on the road ; sold each DS-310249 For 99-09 Twin Cam FLHT, FLHR, FLTR and 99-05 FXD $17.95 DS-310247 For 84-99 Evolution Big Twin 17.95 DS-310248 For L84-03 XL 18.95 NO-PAIN OIL DRAINS Specially modified quick-release coupling makes oil changes a snap Simply attach the drain hose to the special coupler, drain the oil, remove the hose from the coupler and refill the tank No more oily mess or fumbling with a hose plug DS-310245 installs in-line on the OEM drain hose on 89-99 FXST/FLST and 91-94 FXR models DS-310243 replaces the stock oil plug on early-style ( 1 /2-20) oil tanks and remains permanently on the tank by Custom Cycle Engineering DS-310245 In-line oil drain for 89-99 FXST/FLST and 91-94 FXR $77.95 DS-310243 1 /2-20 oil drain 71.95 911

2005-1400 DS-275109 0712-0021 DS-275108 DS-275119 0712-0023 0712-0012 SPIN-ON High-quality spin-on filters are a dependable replacement for most H-D models Available in chrome and black versions Twin Cam and V-Rod filters feature 10 micron paper 0712-0019 DS-275203 Filters with nut include a 17mm hex nut on the end of the filter for easy installation/removal DS-275201 DS-275206 DS-275202 0712-0018 DS-173527 DESCRIPTION BLACK BLACK WITH NUT CHROME CHROME WITH NUT For 99-09 Twin Cam models; repl. OEM #63798-99 DS-275109 $8.95 0712-0021 $9.95 DS-275108 $10.95 0712-0011 $12.95 For 80-98 FLT; 82-94 FXR; 84-99 FXST, FLST; L84-09 XL; repl. OEM #s 63796-77A, 63806-83 and 63805-80A DS-275204 7.45 0712-0019 9.95 DS-275203 10.95 0712-0009 12.95 For 91-98 Dyna Glide; repl. OEM #63813-90 DS-275119 8.95 0712-0023 9.95 DS-275118 10.95 0712-0012 12.95 For 02-09 V-Rod; repl. OEM #63793-01K 2005-1400 9.95 0712-0022 9.95 - - - - For L82-86 FLH, FX; 80-E84 XL; repl. OEM #s 63782-80A and 63810-80 DS-275206 7.95 0712-0132 9.95 DS-275205 10.95 0712-0018 12.95 For 53-82 FX/FL, 57-78 XL; repl. OEM #63840-53 DS-275201 1 4.95 - - - - - - Paper filter for 48-52 Panhead; 36-47 Knucklehead; 36-48 Flathead; repl. OEM #63840-48A DS-275202 1 5.95 - - - - - - Side mount oil filter gasket set for 48-64 FL DS-173527 11.95 - - - - - - 1 This is a drop-in filter. DS-275188 0712-0008 DS-275142 0712-0007 DS-275141 DS-275140 MAGNETIC RING High-quality spin-on-style oil filters Available in chrome or black Magnetic filters are designed with a magnetic ring in center to capture small particles of loose metal and come with pressure relief valves Twin Cam and V-Rod filters feature 10-micron paper Some filters come with a 17mm nut on the end of the filter for easy installation/removal 0712-0006 APPLICATION BLACK CHROME CHROME WITH NUT 02-09 V-Rod; repl. OEM #63793-01K 2005-0024 $13.95 - - - - 99-09 Twin Cam; repl. OEM #63798-99 (3 1 /4 ) - - DS-275188 $13.95 0712-0008 $14.95 91-98 FXD; repl. OEM #63813-90 (5 1 /2 ) DS-275142 12.95 DS-275127 13.95 0712-0007 14.95 84-99 FXST/FLST, 84-99 FLT/FLH, L84-08 XL, 82-94 FXR; repl. OEM #s 63796-77A, 63806-83, 63805-80A (3 1 /4 ) DS-275141 10.95 DS-275126 12.95 0712-0004 14.95 L82-86 FX/FL, 80-E84 XL; repl. OEM #s 63782-80, 63810-80 (2 1 /4 ) DS-275140 10.95 DS-275125 12.95 0712-0006 14.95 912 0712-0058 DS-275113 DS-275115 DS-275117 DS-275129 DS-275130 HD-2L PERF-FORM Black or chrome Perf-form oil filters have a proven service record Made from the best materials and allow for quick changes PART #s DS-275114 and HD-2L also fit our spin-on kits PART #s DS-275015 and DS-275017 and most H-D accessory spin-on kits HD-V Black filter for 02-08 V-Rod models; repl. OEM #63793-01K DS-275130 Chrome filter for 99-08 Twin Cam models (3.5 ) w/ anti-drain back valve DS-275111 Black filter for 99-08 Twin Cam models (3.5 ) w/ anti-drain back valve DS-275114 Chrome filter for all 80-98 5-sp.; 84-99 FXST, FLST; L84-08 XL; for all 94-02 Buell models (exc. Blast); repl. OEM #63796-77A (4.125 ) HD-2L Black filter for all 80-98 5-sp. (including fuel-injected models); 84-99 FXST, FLST; L84-08 XL; for all 94-02 Buell models (exc. Blast); repl. OEM #s 63805-80, 63806-83 (4.125 ) DS-275129 Chrome filter for all 91-98 Dyna Glide models; repl. OEM #63813-90 (5.5 ) DS-275128 Black filter for all 91-98 Dyna Glide models; repl. OEM #63812-90 (5.5 ) DS-275113 Chrome filter for L82-86 FXWG, 82-84 Shovelhead w/ factory spin-on kit; 80-E84 XL; repl. OEM #s 63810-80, 63782-80 (2.25 ) DS-275117 Black filter for L82-86 FXWG, 82-84 Shovelhead w/ factory spin-on kit; 80-E84 XL; repl. OEM #s 63810-80, 63782-80 (2.25 ) DS-275115 Drop-in filter for 53-82 FX, FL, 57-78 XL (4.5 ); repl. OEM #63840-53 0712-0058 Black filter for 00-09 Blast, 03-09 Firebolt XB9R, 05-09 Lightning City XXB9SX/Lightning XB12CG, 03-04 Lightning XB9S, 04-09 Firebolt XB12R/Lightning XB12S PRICE LIST PART # 0712-0058 $11.95 DS-275111 10.95 DS-275113 14.95 DS-275114 15.95 DS-275115 8.95 DS-275117 9.95 DS-275128 10.95 DS-275129 15.95 DS-275130 15.95 HD-2L 11.95 HD-V 11.95

K&N delivers a Race-Spec oil filter which is built with a synthetic media specifically designed to withstand the high concentrates of synthetic racing oils Built to racing specifications 17mm hex nut allows easy-on/easy wrench-off Synthetic filter media provides outstanding filtration at high-flow rates Predrilled for safety wire security Protected by a heavy-duty canister and a double-rolled base plate Check-valve/anti-drain back valve prevents drain-back and dry starts; where applicable Prelubed base gasket for optimum seal TUV production monitored and endorsed ensures the highest quality filters available Performance Gold (PG) filters do not include a bypass valve FITS MODEL REPLACES OEM # BLACK PG BLACK CHROME PG CHROME For 99-09 Twin Cam models 63798-99, 63731-99 KN-171B - KN-171C - For 91-98 Dyna Glide 63812-90, 63813-90 - - KN-173C - For 80-98 FLT, 82-94 FXR, 84-99 Softail, L84-09 XL; all 94-02 Buell models (exc. Blast) 63796-77A, 63805-80A - KN-170 - KN-170C For 02-09 V-Rod 63793-01K - - KN-174C - For L82-86 FL/FX 4-speed, 79-E84 XL 63782-80, 63810-80A - - KN-172C - For 02-09 Buell Blast 500 (all), 04-09 Firebolt XB12R 1200, 03-09 Firebolt XB9R 900, 03-09 Lightning/CityX XB9S/SX 900, 04-09 Lightning XB12S/SCG 1200 6380600Y 0712-0045 - - - PRICE LIST PART # PART # PART # PART # 0712-0045 $14.95 KN-170 14.95 KN-170C $16.95 KN-171B 14.95 KN-171C $16.95 KN-172C 14.95 EMGO Only the highest quality paper, metal and rubber are used to manufacture these top-grade filters Bonded with extra strong epoxy (polyvinyl acetate) for long life Clean oil makes engines last longer KN-173C $17.95 KN-174C 16.95 0712-0099 0712-0100 Sturdy steel canister houses the finest filtering media and internal components available Canister is slightly smaller in diameter than stock filters to make them easier to remove and install Designed with a direct bypass valve that routes bypass oil directly to the filter exit, which minimizes the amount of contaminants carried to the engine in the unfiltered bypass oil The nominal particle capture size is smaller than that of stock filters while the resistance to oil flow is nearly the same Available in black and chrome finish FOR 84-99 BIG TWIN 0712-0099 Black $10.95 0712-0100 Chrome 13.95 FOR 99-09 TWIN CAM 0712-0101 Black 10.95 0712-0102 Chrome 13.95 FITS MODEL REPLACES OEM # EMGO BLACK EMGO CHROME EMGO DROP-IN 91-98 Dyna Glide 63812-90, 63813-90 10-82430 10-82420 - 80-98 FLT, 82-94 FXR, 84-99 FXST/FLST, L84-09 XL; 63731-99/A, 63781-72R, 63796-77/A, 10-82410 10-82400 - all 94-02 Buell models (exc. Blast) 63798-99/A, 63805-80/A, 63806-83 10-82450 1 10-82440 1 - L82-86 FL/FX 4-speed, 79-E84 XL 63782-80, 63810-80A 10-07700 10-07800 - 53-82 FX/XL, 53-78 XL 63840-53 - - 10-28300 00-09 Buell Blast, 03-09 Buell Firebolt XB9R/ Buell Lightning XB9S, 04-09 Buell Firebolt XB12R/ Buell Lightning XB12S, 06-07 Ulysses XB12X 63806-00Y - - - 1 Micro-Tech filter. HIFLOFILTRO The original Hiflofiltro factory was founded in 1955 and has been manufacturing filters for the OEM motor industry since 1963 With the experience of more than five decades, constant research and development and featuring a completely modern production facility Hiflofiltro offers some of the best quality filters in the world TUV approved and production monitored to ensure OEM or better quality PRICE LIST PART # 10-07700 $5.95 10-07800 7.95 10-28300 3.95 10-82400 8.95 10-82410 5.95 10-82420 10.95 10-82430 7.95 10-82440 11.95 10-82450 7.95 Constructed using the best materials available One of the broadest ranges of aftermarket coverage FITS MODEL REPLACES OEM # BLACK HF171B HF173C CHROME 99-09 Twin Cam models (anti-drain back valve) 63798-99, 63731-99 HF171B $6.65 HF171C $8.85 91-98 Dyna Glide 63812-90, 63813-90 - - HF173C 11.65 80-90 FLT, 82-94 FXR, 84-99 Softail, L84-09 XL 63796-77A, 63805-80A HF170B 6.65 HF170C 9.00 L82-86 FL/FX 4-speed, 80-E84 XL 63782-80, 63810-80A - - HF172C 8.85 97-02 Cyclone M2, 94-02 Lightning S1/X1, 02 White Lightning X1W, 94-02 Thunderbolt S2/S2T/S3/S3T 63805-80A HF170B 6.65 HF170C - 9.00 00-09 Buell Blast, 03-09 Buell Firebolt XB9R/Buell Lightning XB9S, 04-09 Buell Firebolt XB12R/Buell Lightning XB12S 63806-00Y 0712-0044 7.20 - - 02-09 V-Rod - - - HF174C 8.85 High-quality filters are made to strict specifications to provide superior performance Micron rating of 10 traps microscopic dirt particles without restricting oil flow Pressure relief valve ensures regular oil flow Include all necessary O-rings or gaskets Available for spin-on applications PH6022 PH6065 FITS MODEL REPLACES OEM # BLACK CHROME 99-09 Twin Cam (anti-drain back valve) 63798-99, 63731-99 PH6022-91-98 Dyna Glide 63812-90, 63813-90 - PH6068 80-98 FLT, 82-94 FXR, 84-99 FXST/FLST, L84-09 XL; all 94-02 Buell models (exc. Blast) 63731-99/A, 63781-72R, 63796-77/A, 63798-99/A, 63805-80/A, 63806-83 - PH6065 L82-86 FL/FX 4-speed, 79-E84 XL 63782-80, 63810-80A - PH6019 00-09 Buell Blast, 03-09 Buell Firebolt XB9R/ Buell Lightning XB9S, 04-09 Buell Firebolt XB12R/ Buell Lightning XB12S, 06-07 Ulysses XB12X 63806-00Y PH4967 - PRICE LIST PART # PH4967 $9.00 PART # PH6019 $14.60 PART # PH6022 $10.30 PART # PH6065 $18.30 PART # PH6068 $19.60 OIL FILTER MAGNETS Polished ceramiccoated magnets Two mini magnets designed for smaller motorcycle filters No restriction in oil flow SAE-tested engine safe Rated to a temperature of 842 F Removes a majority of wear particulates down to.5 microns Improves engine efficiency Sold in pairs 0712-0139 Magna-Guard filter magnets $7.95 SECTION 15 913

0713-0005 0713-0002 0713-0003 0713-0059 0713-0030 0713-0025 0713-0007 914 0713-0054 OIL COOLERS INSTALLATION TIME MEASURED IN MINUTES EXTRA RIDING TIME MEASURED IN YEARS Cooler oil makes engines last longer simple as that! Jagg oil coolers feature cutting-edge technology to keep your engine cool under the most punishing conditions And because they re designed to look as good as they perform, they ll perfectly complement your bike s style Hoses and clamps are included with oil cooler kits ERED TO PERFORM Multipass oil flow configuration ensures the oil s utilization of the entire oil cooler Specially designed turbulators in each oil passageway gently stir oil, exposing it to more critical heat dissipation surface area for superior cooling with minimal oil pressure restriction Highly concentrated mini-louvered air fins allow maximum heat transfer NOTE: Vertical oil coolers do not fit touring models with lower fairings. NOTE: Ten-row coolers are recommended for 95 and larger motors. VERTICAL-MOUNT OIL COOLERS 6-ROW DELUXE 0713-0002 1 84-09 FXST/FLST models $226.95 0713-0002 82-99 FXR models 226.95 0713-0002 55-83 Panhead and Shovelhead 226.95 0713-0002 1 84-09 FLHT, FLHR, FLTR models 226.95 0713-0002 55-03 XL models 226.95 6-ROW SLIMLINE 0713-0003 1 84-09 FXST/FLST models 180.95 0713-0003 82-99 FXR models 180.95 0713-0003 55-83 Panhead and Shovelhead 180.95 0713-0003 1 84-09 FLHT, FLHR, FLTR models 180.95 0713-0003 55-03 XL models 180.95 HORIZONTAL-MOUNT OIL COOLERS 0713-0063 SIX-ROW LOW MOUNT 0713-0025 1 84-08 FXST/FLST models; black $190.95 J1270 1 84-08 FLHT, FLHR, FLTR models; black 190.95 0713-0007 1 84-08 FLHT, FLHR, FLTR models; chrome 226.95 J1390 96-02 Buell models (except XBs); black 279.95 TEN-ROW LOW MOUNT 0713-0054 1 84-09 FLHT, FLHR, FLTR models; black 226.95 0713-0064 6-ROW CHROME 0713-0005 1 84-09 FXST/FLST models $299.95 0713-0005 82-99 FXR models 299.95 0713-0005 55-83 Panhead and Shovelhead 299.95 0713-0005 1 84-09 FLHT, FLHR, FLTR models 299.95 0713-0005 55-03 XL models 299.95 TEN-ROW INLINE 0713-0029 84-09 FXST/FLST models; black 210.95 0713-0058 84-09 FXST/FLST models; chrome 279.95 0713-0030 84-09 FLHT, FLHR and FLTR models; black 210.95 0713-0059 84-09 FLHT, FLHR and FLTR models; chrome 279.95 1 Twin Cam models require use of oil filter adapter PART #J4600 or 0713-0031 to access oil supply. TEN-ROW LOW MOUNT (CONT) 0713-0063 1 84-09 FLHT, FLHR, FLTR models; chrome $299.95 0713-0064 1 91-09 Dyna models; black 226.95 0713-0065 1 91-09 Dyna models; chrome 299.95 1 Twin Cam models require use of oil filter adapters PART #J4600 or 0713-0031 to access oil supply.

J4600 Front J4400 Back J4400 Front OIL COOLER ADAPTERS Allow quick-and-easy access to oil supply for any oil cooler installation Advanced design allows hot oil to go through the oil filter before it is routed through the oil cooler, resulting in less overall restriction and pressure drop J4400 Adapter for all H-D models w/ front-mounted spin-on filters except fuel-injected Evolution and all Twin Cam models $85.95 J4600 Off-set adapter for fuel-injected Evolution and all Twin Cam models 110.95 0713-0031 Off-set adapter w/ automatic thermostat for fuel-injected Evolution and all Twin Cam models 150.95 0713-0048 J4600 Back 0713-0049 0713-0031 Back 0713-0031 Front PART #0713-0031 features an integrated automatic thermostatic actuator to ensure rapid engine warm-up 0713-0050 Anti-rotation kits (sold separately) ensure that the oil filter adapters PART #S J4600 and 0713-0031 cannot rotate during oil filter removal PART #0713-0050 upgrade nut is designed to replace the stock threaded oil filter mounting stem on applications where stem is too long, to ensure proper oil flow characteristics when installing adapter PART #J4400 4600GK Service kit (repl. gasket) for oil filter adapter PART #s J4600 and 0713-0031 $9.95 0713-0048 Off-set anti-rotation kit for adapter PART #s J4600 and 0713-0031, Twin Cam A models 9.95 0713-0049 Off-set anti-rotation kit for adapter PART #s J4600 and 0713-0031, Twin Cam B models 9.95 0713-0050 J4400 oil filter adapter upgrade nut for S&S motors 9.95 0713-0009 0713-0011 0713-0060 0713-0010 0713-0061 0713-0062 0713-0012 UNIVERSAL OIL COOLERS Ideal for custom and vintage builders, racing, or any need for a cooler Feature cutting-edge technology to keep your engine cool under the most punishing conditions Specially designed turbulators in each oil passageway gently stir oil, exposing it to more critical heat dissipation surface area for superior cooling with minimal increase in oil pressure restriction Highly concentrated mini-louvered air fins allow maximum heat transfer Do not include hoses or hardware 0713-0009 6 row; 2.5 W x 8.25 L x 1.5 thick; inline inlet/ outlet w/ 3 7 /8 oc top-mounting tabs $155.95 0713-0011 6 row; 2.5 W x 8.25 L x 1.5 thick; 90 inlet/outlet w/ 3 7 /8 oc bottom-mounting screws 155.95 0713-0012 6 row; 2.5 W x 8.25 L x 1.5 thick; 90 inlet/outlet w/ 3 7 /8 oc top-mounting screws 155.95 0713-0060 6 row; 2.5 W x 8.25 L x 1.5 thick; inline inlet/ outlet w/ 3 7 /8 oc bottom-mounting screws 155.95 CLAMPS For mounting Jagg s universal oil coolers, custom oil coolers, and many other applications Sold each 0713-0013 For 1 dia. frames $6.95 0713-0014 For 1 1 /8 dia. frames 6.95 0713-0015 For 1 1 /4 dia. frames 6.95 0713-0013 0713-0016 For 1 3 /8 dia. frames $6.95 0713-0017 For 1 1 /2 dia. frames 6.95 0713-0061 10 row; 4 W x 8.25 L x 1.5 thick; inline inlet/ outlet w/ 3 7 /8 oc bottom-mounting screws $195.95 0713-0062 10 row; 4 W x 8.25 L x 1.5 thick; 90 inlet/outlet w/ 3 7 /8 oc bottom-mounting screws 195.95 0713-0010 14 row; 5 W x 8.25 L x 1.5 thick; inline inlet/ outlet w/ 3 7 /8 oc top- and bottom-mounting tabs 235.95 OIL COOLER BYPASS VALVE Bypass valve J4000B works in conjunction with all oil coolers as a manual version of a thermostat Compact design blends into the oil lines, offering a less cluttered appearance J4000B By-pass valve for all oil coolers $64.95 915

916 SINGLE TUBE BILLET OIL COOLER 10 3 /4 long with 3 /8 i.d. hose fittings Double pinch frame clamps hold coolers firmly in place 0713-0021 Drops oil temperature by 20 degrees Available in a chrome or black/polished finish Requires an oil filter adapter for proper installation (sold separately) FOR 1 1 /8 FRAMES 0713-0021 Black w/ polished fins $205.95 0713-0023 Chrome 233.95 99-08 FLHT/I, FLHR/I, FLTR/I, FLHTCU/I (1 1 /8 AND 1 1 /4 CLAMPS) 1911-5010 Chrome $438.95 1911-5011 Black w/ polished fins 438.95 1911-5012 Black 438.95 91-09 FXD, FXDWG (1 1 /4 AND 1 1 /2 CLAMPS) 1911-5007 Chrome 429.95 0713-0023 FOR 1 1 /4 FRAMES 0713-0022 Black w/ polished fins $205.95 0713-0024 Chrome 233.95 TUBE OIL COOLERS Available in chrome, black with polished fins or all-black styles Coolers mount to the front down tube of the frame Twin Cam applications require an adapter to provide easy access to the oil supply (sold separately) Cooler includes required mounting hardware; hose clamps and oil line must be purchased separately (uses 3 /8 i.d. oil line) Measures approximately 10 1 /2 long with a 1 diameter BLACK OIL COOLER HOSE KIT Includes 3 of Russell Pro Classic black cloth braided hose and four Russell black anodized compression hose fittings A clean, no clamp installation on smooth barb oil cooler and filter adapters is provided by the fittings Gives you the perfect finishing touch to a durable cooler installation 0711-0156 Oil cooler hose kit $92.95 0711-0159 BRAIDED HOSE Braided hose is neoprene lined Can be used as fuel line or oil line For use with Goodridge hose finishers (sold separately) Available in stainless or black finish 1 /4 HOSE 0711-0090 6, stainless $44.95 0711-0091 10, stainless 67.95 0711-0092 25, stainless 160.95 5 /16 HOSE 0711-0093 6, stainless 44.95 0711-0094 10, stainless 74.95 0711-0095 25, stainless 176.95 91-09 FXD, FXDWG (1 1 /4 AND 1 1 /2 CLAMPS) (CONT) 1911-5008 Black w/ polished fins $429.95 00-09 FXST, FLST (1 1 /4 CLAMPS) 1911-5003 Chrome 438.95 1911-5004 Black w/ polished fins 438.95 1911-5005 Black 438.95 0711-0097 3 /8 HOSE 0711-0096 6, stainless $45.95 0711-0159 6, black 91.95 0711-0097 10, stainless 76.95 0711-0160 12 black 172.95 0711-0098 25, stainless 180.95 CHROME OIL COOLER KIT Kits mount to frame tubes with supplied clamps and reducers Available with or without a temperature gauge Comes with AN #6 fittings (use with -6 lines 0713-0052 found in most speed shops) DS-310204 If using standard 3 /8 hose, use breather fittings PART #DS-245263 (sold separately) Measures 12 L x 2.25 diameter CNC machined from billet aluminum and chrome plated 0713-0056 Replacement clamps available separately FOR 1 TO 1 1 /4 FRAME TUBES DS-310204 Oil cooler $330.95 0713-0052 Oil cooler w/ temp gauge 385.95 0713-0056 Replacement clamp 66.95 FOR 1 1 /2 FRAME TUBES 0713-0019 Oil cooler 330.95 0713-0051 Oil cooler w/ temp gauge 385.95 0713-0057 Replacement clamp 66.95 1911-5007 1911-5004 1911-5002 Stainless BRAIDED STAINLESS STEEL HOSE 0711-0104 1 /4 i.d. $121.95 0711-0105 5 /16 i.d. 123.95 0711-0106 3 /8 i.d. 125.95 65-84 FLH, FX, 84-99 FXST, FLST, FLHR/I, FLT/I, FLHR/I (1 1 /8 CLAMPS) 1911-5000 Chrome $438.95 1911-5001 Black w/ polished fins 438.95 1911-5002 Black 438.95 OIL COOLER COVER Quality black vinyl cover features hook-and-loop fasteners for easy installation and removal Keeps oil at the correct operating temperature when riding in cool weather Designed for use on OEM and Jagg Slimline oil cooler 8 L x 2 1 /4 W x 1 1 /4 D 3511-0001 Oil cooler cover $14.95 Copper BRAIDED STAINLESS AND COPPER HOSES 25 rolls of braided stainless steel or braided copper hoses for various OEM and custom applications STAINLESS STEEL BRAIDED HOSE Available in 3, 6, or 25 lengths, stainless steel braided hoses can be used for any oil and gas applications Available in natural/silver color DS-096605 1 /4 x 3 $18.95 DS-096615 1 /4 x 6 34.95 DS-096612 1 /4 x 25 139.95 DS-096606 5 /16 x 3 21.95 DS-096616 5 /16 x 6 39.95 BRAIDED COPPER HOSE 0711-0107 1 /4 i.d. $101.95 0711-0108 5 /16 i.d. 103.95 0711-0109 3 /8 i.d. 106.95 DS-096612 DS-096613 5 /16 x 25 $167.95 DS-096607 3 /8 x 3 22.95 DS-096617 3 /8 x 6 44.95 DS-096614 3 /8 x 25 167.95