HOE MAKING SERIES CATAOG NO. 000 HIGH PERFORMANCE HOE MAKING APPICATIONS IJET RI SERIES IJET INCORPORATE www.ijetusa.com
Inexable S-Cut 40º Specifications - rilling epth 3x iameter PARTS l l Screw Wrench TS-0750-AMS TS-078-AMS TS-08-AMS TS-0875-AMS TS-038-AMS TS-000-AMS TS-047-AMS TS-06-AMS TS-03-AMS TS--AMS TS-88-AMS 3/4 5/3 /6 7/8 /6-3/64 -/6-3/3 -/8-3/6 5.44 6.4 6.338 6.535 7.83 7.874 8.070 8.67. 3.4 3.464 3.77 4.5 4.5 4.74.5.5.5.5.5.5.5 ESW-06 ESW-06 ESW-06 SW-0307 SW-0307 SW-30 SW-30 SW-30 CSW-355 CSW-355 CSW-355 T- T- T- INSERTS TS-0750 TS-078 TS-08 TS-0875 TS-038 TS-000 TS-047 TS-06 TS-03 TS- TS-88 40º Specifications - rilling epth 5x iameter TS-0750-AM TS-078-AM TS-08-AM TS-0875-AM TS-038-AM TS-000-AM TS--AM TS-88-AM PARTS l Screw Wrench 3/4 5/3 /6 7/8 /6 -/8-3/6 7.5 7.76 7. 8.307.055.5 0.430 0.60 4.74 4.88 5.36 5.748 5.05 6..5.5.5.5 ESW-06 ESW-06 ESW-06 SW-0307 SW-0307 SW-30 CSW-355 CSW-355 l T- T- INSERTS TS-0750 TS-078 TS-08 TS-0875 TS-038 TS-000 TS- TS-88 Note: All cutters are supplie without inserts. --
Inexable S-Cut Inserts CATAOG NUMBER IMENSION JC505 STOCK TS-0750 3/4 TS-078 5/3 TS-08 /6 TS-0875 7/8 TS-038 TS-000 /6 TS-047-3/64 TS-06 -/6 TS-03-3/3 TS- -/8 TS-88-3/6 Recommene Cutting Conitions WORK MATERIA RATE.750 TOO IAMETER.78.8.875.38 0.047.06.03..87 ow Carbon Steel AISI 00,530.3,470 4.7,40 4.,30.,0.,0.8,00.,080.0,050.6,00. 60.5 AISI 050,70.,0 4.6,80 4.,00.,00. 50.4 0 0. 0.8 0.4 0..6 (Heat Treate/45RC),00 6. 80 5. 40 5.6 5. 80 4. 4.6 730 4.4 70 4.3 4. 680 4. 640 3.8 Alloy Steel AISI 440,70.7,0.,80.8,00 0.,00 0. 50.4 0 0. 0.8 0.4 0..6 Tool Alloy Steel AISI H- 770 7.7 740 7.4 70 7. 660 6.6 60 6. 580 5.8 550 5.5 540 5.4 530 5.3 50 5. 40 4. Harene Alloy (Heat Treate/45RC) 50 4.08 40 3. 470 3.76 440 3.5 40 3.8 380 3.04 370.6 360.88 350.8 340.7 30.56 Stainless Steel AISI 304,00 0. 80.8 40.4 8.7 80 8. 7.6 730 7.3 70 7. 7.0 680 6.8 640 6.4 Cast Iron,530,470,40,30,0,0,00,080,050,00 60 3.0...7 8.3 7.3 6.4 6..8.3 4.4 Aluminum Alloy 660 Heat Treate,530.,470.8,40.3,30 0.5,0.8,0.,00 8.7,080 8.6,050 8.4,00 8. 60 7.7-3-
S-Cut rill.406.48.453.4687.4843.56.53.5468.565.603..6406.656.678.6875.703.787.7343.7656 3.66 3.66 3.66 3.858 3.858 4.5 4.5 4.5 4.448 4.448 4. 4. 4. 5.8 5.8 5.34 5.34 5.34 5.5 5.5 5.44 5.44 5.44.377.377.377.535.535.6.6.6....007.007.36.36.36.5.5.677.677.677.834.834.... 0 SC-0-0375-AMS SC-0-03-AMS SC-0-040-AMS SC--04-AMS SC--043-AMS SC--045-AMS SC--046-AMS SC--048-AMS SC--050-AMS SC--05-AMS SC--053-AMS SC-4-054-AMS SC-4-056-AMS SC--057-AMS SC--05-AMS SC--060-AMS SC-6-06-AMS SC-6-064-AMS SC-7-065-AMS SC-7-067-AMS SC-7-068-AMS SC-8-070-AMS SC-8-07-AMS SC--073-AMS SC--075-AMS SC--076-AMS Specifications l.78.768.8.88.8437.853.8750.806.06.8.375.53.687.843 0.0.03.046.06.078.03.0..40.6.7.87 6.4 6.4 6.338 6.338 6.338 6.535 6.535 6.73 6.73 6.73 7.83 7.83 7.83 7.480 7.480 7.874 7.874 8.070 8.070 8.070 8.67 8.67 3.4 3.4 3.464 3.464 3.6 3.6 3.6 3.77 3.77 4.04 4.04 4.5 4.5 4.5 4.74 4.74 0.50 SC-0-078-AMS SC-0-07-AMS SC--08-AMS SC--08-AMS SC--084-AMS SC--085-AMS SC--087-AMS SC-3-08-AMS SC-3-00-AMS SC-3-0-AMS SC-4-03-AMS SC-4-05-AMS SC-5-06-AMS SC-5-08-AMS SC-5-00-AMS SC-6-0-AMS SC-6-03-AMS SC-7-04-AMS SC-7-06-AMS SC-7-07-AMS SC-8-0-AMS SC-8-0-AMS SC---AMS SC--4-AMS SC---AMS SC-30-7-AMS SC-30-8-AMS Specifications l rilling epth 3 x iameter -4- l
rilling epth 5 x iameter Specifications SC-0-0375-AM SC-0-03-AM SC-0-040-AM SC--04-AM SC--043-AM SC--045-AM SC--046-AM SC--048-AM SC--050-AM SC--05-AM SC--053-AM SC-4-054-AM SC-4-056-AM SC--057-AM SC--05-AM SC--060-AM SC-6-06-AM SC-6-064-AM SC-7-065-AM SC-7-067-AM SC-7-068-AM SC-8-070-AM SC-8-07-AM SC--073-AM SC--075-AM SC--076-AM l 4.448.65.406.48.453.4687.4843.56.53.5468.565.603..6406.656.678.6875.703.787.7343.7656 4.448 4.448 4.84 4.84 5.03 5.03 5.03 5.36 5.36 5.36 5.6 5.6 6.0 6.0 6.0 6. 6. 6.6 6.6 6.6 6.88 6.88 7.5 7.5 7.5 Recommene Cutting Conitions.65.65.5.5.677.677.677.834.834.834 3.88 3.88 3. 3. 4. 4.. 0 Specifications SC-0-078-AM SC-0-07-AM SC--08-AM SC--08-AM SC--084-AM SC--085-AM SC--087-AM SC-3-08-AM SC-3-00-AM SC-3-0-AM SC-4-03-AM SC-4-05-AM SC-5-06-AM SC-5-08-AM SC-5-00-AM SC-6-0-AM SC-6-03-AM SC-7-04-AM SC-7-06-AM SC-7-07-AM SC-8-0-AM SC-8-0-AM SC---AM SC--4-AM SC---AM SC-30-7-AM SC-30-8-AM S-Cut rill l.78 7.76 4.74.768.8.88.8437.853.8750.806.06.8.375.53.687.843 0.0.03.046.06.078.03.0..40.6.7.87 7.76 7. 7. 7. 8.307 8.307 8.503 8.503 8.503.055.055.5.5.5.448.448.84.84.84 0.03 0.03 0.43 0.43 0.43 0.6 0.6 4.74 4.88 4.88 4.88 5.36 5.36 5.33 5.33 5.33 5.748 5.748 5.05 5.05 5.05 6.06 6.06 6.47 6.47 6.47 6.574 6.574 6. 6. 6. 0.50 WORK MATERIA RATE.375 TOO IAMETER.437.500.56.65.750.8.875 0.06. ow Carbon Steel AISI 00 AISI 050 (Heat Treate/45RC) Alloy Steel AISI 440 Alloy Tool Steel AISI H- Harene Alloy (Heat Treate/45RC) Stainless Steel AISI 304 Cast Iron Aluminum Alloy 660 Heat Treate,300 3.0,840 4.7,380 8.3,830 8.3,380.0 830 3.3,380 8.8,750 33.0,0.7,70.7,570.6,80 7.,570.7,80.4 70.84,80 7.08,360 8.3,0.,0.,530.,0 6.,530.3,0. 60.76,0 6.,0 7.5,0.5, 7.0,360 0.,00 6.,360.6,00 8. 60.44,00 6.,040 4.5, 0.,530.3,0.76 0 5.5,0. 0 7.4 550. 0 5.5,830.0,530.,70.7,00 8.6 4.6,00 0. 6. 460.84 4.56,530 8.4,70 7.6,80.8 40 7.5 70 4.3 40.4 70 5.7 40.68 70 4.6,40 6.,80 7.,00 0. 6.6 3. 8.7 5. 30.56 3.,30.7,00 6.5 50.5 6.08 570 3.4 7.6 570 4.6 340.36 570 3.4,0.8 50 5.7.0 70 5.76 540 3. 70 7. 540 4.3 30.8 540 3.4,080.0 5.4 8.5 680 5.44 50 3. 680 6.8 50 4. 30.4 50 3.06,00. 5. -5-
Sigma rill l 40 with Coolant Through X-H-SM Type Specifications - rilling epth 4 x iameter X-H-SM 500 X-H-SM 656 X-H-SM 8 X-H-SM 6 X-H-SM 3 X-H-SM 38 X-H-SM 3438 X-H-SM 354 X-H-SM 3750 X-H-SM 306 X-H-SM 406 X-H-SM 4 X-H-SM 4375 X-H-SM 453 X-H-SM 4688 X-H-SM 4844 X-H-SM 5000 X-H-SM 56 X-H-SM 53 X-H-SM 546 X-H-SM 565 X-H-SM 578 X-H-SM 537 X-H-SM 604 X-H-SM X-H-SM 6406 X-H-SM 6563 X-H-SM 678 X-H-SM 6875 X-H-SM 703 X-H-SM 788 X-H-SM 7344 X-H-SM 7500 l.500 3.0.46.656 3.346.654.656.8.6.3.38.406.4.453.56.53.565.604..6406.6563.678.6875.703.788.7344 3.6 3.6 3.858 4.4 4.4 4.33 4.58 4.58 4.74 4.74 4. 5.8 5.3 5.3 5.3 5.5 5.70 5.06 5.06 6.0 6.63 6.63 6.63 6.80 6.80 7.83 7.83 7.83.77...6.087.65.36.36.50.677.677.835.835. 3.0 3.8 3.8 3.8 3.504 4. 4. 4.58 4.58 4.58.3.4..6563.703 X-H-SType Specifications - rilling epth 6 x iameter X-H-S 500 X-H-S 656 X-H-S 8 X-H-S 6 X-H-S 3 X-H-S 38 X-H-S 3438 X-H-S 354 X-H-S 3750 X-H-S 306 X-H-S 406 X-H-S 4 X-H-S 4375 X-H-S 453 X-H-S 4688 X-H-S 4844 X-H-S 5000 X-H-S 56 X-H-S 53 X-H-S 546 X-H-S 565 X-H-S 578 X-H-S 537 X-H-S 604 X-H-S X-H-S 6406 X-H-S 6563 X-H-S 678 X-H-S 6875 X-H-S 703 X-H-S 788 X-H-S 7344 X-H-S 7500 l.500.6.656.656.65.8.6.3.38.406.4.453.56.53.565.604..6406.6563.678.6875.703.788.7344 4.4 4.4 4.33 4.58 4.74 4. 4. 5.8 5.3 5.5 5.70 5.70 5.06 6.0 6. 6. 6.46 6.63 6.80 7.087 7.087 7.83 7.480 7.480 7.874 8.07 8.68 8.68 8.465.83.480.480.638.835. 3.0 3.0 3.504 3.66 3.8 3.8 3.88 4.04 4. 4. 4.58 4.74 4.843 4.843 5.03 5.7 5.7 5.354 5.47 5.66 5.787 5.787 5.84.3.4..6563.703-6-
.0.406.63.78.875.03.87.343.500.656.8.6.3.38.406.4.453.53.565..83.33.44.58.835.835 3.07 3.07 3.68 3.465 3.465 4.58 4.74 4.74 4. 5.36 5.36 5.36 5.630 5.06 6.33.063.063.4.60.47.47.575.575.73.80.80.087.087.83.83.83.58.77.835.835 3.03 3.8 3.8 3.8 4.04.0.406.63.78.875.03.87.343.500.656.8.6.3.38.406.4.453.53.565. SH-S Type.0.406.63.78.875.03.87.343.500.656.8.6.3.38.406.4.453.56.53.565.604...047.65.83.44.44.58.58.756.. 3.0 3.0 3.0 3.504 3.504 4. 4. 4.370 4.370 4.58 4.58 4.58 0.70 0.787 0.866 0.45.04.04.0.0.0.33.33.457.457.457.575.63.63....008.008.008.008.6.6.05.05.83.83.83.0.406.63.78.875.03.87.343.500.656.8.6.3.38.406.4.453.56.53.565.604. SH-S-0 SH-S-04 SH-S-0 SH-S-07 SH-S-08 SH-S-00 SH-S-0 SH-S-03 SH-S-05 SH-S-06 SH-S-08 SH-S-0 SH-S-03 SH-S-03 SH-S-035 SH-S-037 SH-S-040 SH-S-04 SH-S-043 SH-S-045 SH-S-046 SH-S-048 SH-S-050 SH-S-05 SH-S-053 SH-S-054 SH-S-056 SH-S-057 SH-S-05 SH-S-060 SH-S-06 Specifications - rilling epth x iameter l SH- Type Specifications - rilling epth 4 x iameter l SH--0 SH--04 SH--0 SH--07 SH--08 SH--00 SH--0 SH--03 SH--05 SH--06 SH--08 SH--0 SH--03 SH--03 SH--034 SH--035 SH--037 SH--040 SH--04 SH--043 SH--045 SH--046 SH--048 SH--050 SH--053 SH--056 SH--06-7- Hosoi rill l 40
ijet-rilling Series Recommene Cutting Conitions For Sigma rill WORK MATERIAS ow Carbon Steel AISI 00 (S0C) AISI 04 (S50C) AISI 04 Heat Treate/HRC45 Alloy Steel AISI 445 (SCM445) Alloy Tool Steel AISI (SK) Gray Cast Iron AISI 0 (FC00, FC50) Noular Cast Iron (FC) RATE..87.50.3.375.437.500.56.65.687.750 35 54, 8 45, 36 54 3,00 43, 7, 40,000, 35,000 6, 40, 34,000 0,000 30,600 7,000 6,600 0,000 30,000 5,, 8, 4, 3,300, 8,600 TOO IAMETER,450,450 4,00,450,00,450 4,350,,,0, 8,0,,300 8,50,50 0,50 6,50,0 6,00,00 7,00 4,00 7 4 0 8 0 4 750 7 750 4 7 750 0 Recommene Cutting Conitions For Hosoi rill WORK MATERIAS ow Carbon Steel AISI 00 (S0C) AISI 04 (S50C) Alloy Steel AISI 445 (SCM445) Alloy Tool Steel AISI (SK) Gray Cast Iron GM38M (FC00) Noular Cast Iron GM45M (FC) Stainless Steel AISI 304 (SUS304) Titanium Alloy Inconel RATE. 4,000 30 3,350 0 3,000 8 4,000 3 3, 7 4 3, 0,500,50,000,,550 8 3, 8,300,0 4,,450,450 4 600 600 3 600,00, 7,,500 7,50 4,50 0 500 500 500 TOO IAMETER.87.50.3.375.437.500.56.65, 8,550 4,450 6,300 4, 0, 6,750,550 7,,50,750 4,550 450 450 450.550 8,,00,050,550, 7,350 6,50,00,350,50 350 350 350,50,00 0,00 7,00 300 300 300 ijet Incorporate 45807 Helm Street Plymouth, MI 4 U.S.A. Phone -74-IJET 734-454-00 Fax 734-454-35 No part of this catalog may be printe, copie or reprouce without the expresse written permission of IJET, Inc.