CONTENTS. Adaptable TIGEAR Right Angle Speed Reducers. Specification... How To Order...

CONTENTS Right Angle Speed Reducers Features/Benefits... G4--2 Specification... How To Order... G4--4 G4--5 Nomenclature Easy Selection...... G4--5 G4--6 Selection/Dimensions... Mounting Positions... G4--10 G4--26 Modifications/Accessories... G4--27 Renewal Parts... G4--37 Engineering/Technical... G4--42 Part Number Index... Keyword Index... INDEX--1 INDEX--21 For More Information About... TIGEAR... Combination TIGEAR... G3--1 G5--1 G4--1

FEATURES/BENEFITS DODGE C--FACE ADAPTABLE TIGEAR 3 Bellows Design Compression Chamber 2 Open Ball Bearing 1 Input Seal 4 Hardened Steel Worm Shaft 5 Fine-Grain Continuous or Chill-Cast Bronze Worm Gears 6 7 Single-Lip Seals on Output G4--2 Rugged, Corrosion-Resistant, Cast Iron Housing

FEATURES/BENEFITS DODGE C--Face 1 Special radial lip design effectively pumps lucubration back into the oil sump while simultaneously sealing out external contaminants. The special lip design, used in conjunction with precision, plunge ground seal journals, extends the seal service life by creating less drag, less heat and reduced shaft wear. 2 Open ball bearings allow lubrication and cooling of input seal 3 Bellows design compression chamber minimizes gearcase pressure. 4 Motor adapter removal permits easy access to input worm shaft. Assures simple seal and/or bearing replacement. 5 These worm gears feature a copper tin alloy for superior wear resistance, a computer designed gear geometry, and an optimized gear contact pattern for reduced break-in time and maximum thermal performance. 6 A rugged, cast iron housing ensures long years of service, even in corrosive environments. Each model has interchangeable, optional bolt-on feet, which allow industry-standard mounting dimensions. 7 Bi--rotational lip seals reduce drag on the output shaft for improved efficiency. The plunge ground, 10-20 RMS seal journal surface provides a smooth finish for optimum seal performance. PROVEN RELIALUBE SYSTEM REQUIRES NO PERIODIC MAINTENANCE. Factory-filled, synthesized hydrocarbon lubricant Wide ambient operating temperature range Special compression chamber minimizes gearcase pressure No open path to the environment No conventional vent plugs Minimized seepage and contamination paths Complete cast iron gearcase G4--3

SPECIFICATION The speed reducer shall be a single reduction wormgear reducer incorporating a 3 piece coupled, C-Face input configuration. The reducer shall be manufactured in the United States of America. Worm gear geometry shall be a single enveloping design. The gearcase, bearing housings, and motor adapter shall be manufactured from Class 30 gray iron. A bolt-on foot shall be available. Output configurations offered shall be solid shaft and hollow shaft straight bore. The reducer shall be sealed with no direct passage from the oil sump to the ambient atmosphere. No thru-drilled fastener holes shall be present. A compression chamber within the gearcase shall provide pressure release. Lubrication shall be a factory supplied synthesized hydrocarbon that requires no periodic changes and is filled to a level suitable for all approved mounting positions. This standard fill meets USDA Class AA, H2 food grade lubricant specifications. USDA Class AA, H1 food grade, and low temperature lubricants shall be available to accommodate different applications. The gearing shall consist of a hardened steel worm shaft and a copper tin bronze alloy worm gear for superior wear resistance. All units shall have the wormgear set properly centered during assembly to produce an optimum contact pattern. Solid output shafts shall incorporate tapered roller bearings shimmed for proper running clearances. Seals shall operate on plunge ground journals having a 10-20 µin. finish. Joints shall be sealed with a silicon rubber or anaerobic sealant. No gaskets shall be used. All reducer fasteners shall be grade 5 minimum. Motor mounting bolts and input/output keys shall be provided. When properly service factored to account for the thermal limitations of the reducer, the standard construction shall be suitable for washdown duty in ambient temperatures from -10 F to +165 F. For continuous operation in ambient conditions above 80 F contact DODGE Application Engineering. EASY PAGES G4--6-G4--9 DIMENSIONS PAGES G4--13-G4--23 PAGES G4--27-G4--36 G4--4

/ NOMENCLATURE reducers are designed for operation with NEMA C--Face electric motors. Basic reducer part numbers and the appropriate motor adapter kits are found in the selection tables. Accessories are listed in the modification section of this catalog. All reducers and accessories have a part number. To create a complete assembly, specify the basic reducer part number and the motor adapter part number along with the part numbers of any accessories required. reducers are designed for coupled input service. For belted input requirements, consult Dodge application engineering. 6052256 Basic Reducer Size A175S, 30:1, hollow output (page G4--16) Nomenclature: A175S030N000 6052669 Motor adapter kit size 175 & 200, 56C (page G4--16 & G4--27) 6042752 Size A175 output flange kit (page G4--31) NOMENCLATURE SERIES SIZE OUTPUT TYPE RATIO A ADAPTABLE 133 B BASIC UNIT 005 STD SHAFT 007 150 010 S SHAFT MOUNT 012 175 STRAIGHT BORE 015 018 200 P SHAFT MOUNT 020 w/plug-in Shaft 025 262 030 Y BASIC UNIT 040 350 SPECIAL OUTPUT 050 SHAFT 060 N M U OPTIONS NO BASE STANDARD MOUNTING BASE BENT METAL OUTPUT FLANGE MOTOR FRAME 056 140 180 000 071 080 090 112 SHAFT POSITION L1 K1 LK BLANK CENTER DISTANCE (Distance between axis of input & output shafts) Sizes - 133 1.330 Sizes - 150 1.500 Sizes - 175 1.750 Sizes - 200 2.000 Sizes - 262 2.625 Sizes - 350 3.500 EASY PAGES G4--6-G4--9 DIMENSIONS PAGES G4--13-G4--23 PAGES G4--27-G4--36 G4--5

EASY In the following tables, TIGEAR reducers have been pre-selected for standard motor horsepowers at commonly applied service factors. All selections are for 1750 rpm motors. For selections at other motor speeds refer to the selection procedure using the rating tables. Each block in the selection table provides the following information: Gearcase Size - Worm gear center distance. For example, a size 133 has a 1.33 center distance. Output Torque - Torque that will be produced at the output shaft when the particular motor is loaded to its nameplate rated horsepower. Output OHL - The continuous overhung load that may be applied to the output shaft at one shaft diameter from the seal face. Two methods are available to the designer using the selection tables. The horsepower method, applied in cases where motor horsepower is known, is useful when interchanging with a competitive unit or utilizing an available motor. The torque method requires a knowledge of driven load torque requirements and provides the most economical reducer selection. Both methods assume the desired ratio or output rpm is known. HORSEPOWER METHOD OF Step 1: Step 2: Step 3: Referring to the reducer service factor table on page G4--10. determine the appropriate service factor. Locate the selection table configured for the required service factor. Read down from motor horsepower and across from rpm/ratio to locate the appropriate selection block. TORQUE METHOD OF Step 1: Step 2: Step 3: Step 4: Referring to the reducer service factor table on page G4--10. determine the appropriate service factor. Locate the selection table that applies to the required service factor. Find the row that represents the applicable output rpm/ratio and read across the torque line until the torque value equals or exceeds driven load requirements. Read up from the selection block to determine required motor horsepower. PAGES G4--5 DIMENSIONS PAGES G4--13-G4--23 PAGES G4--27-G4--36 G4--6

EASY 1.00 SERVICE FACTOR 1750 RPM INPUT MOTOR HORSEPOWER RPM RATIO 0.25 0.33 0.5 0.75 1 1.5 2 3 5 SIZE 133 133 133 133 133 150 175 200 262 350 5 Torque 31 lb in 44 lb in 72 lb in 113lbin 154 lb in 237 lb in 322 lb in 494 lb in 835 lb in OHL 397 lb 397 lb 397 lb 397 lb 397 lb 644 lb 614 lb 615 lb 866 lb SIZE 150 150 150 150 150 200 200 262 233 7.5 Torque 46 lb in 66 lb in 107 lb in 168 lb in 229 lb in 356 lb in 479 lb in 730 lb in OHL 731 lb 731 lb 731 lb 731 lb 731 lb 734 lb 734 lb 1015 lb SIZE 133 133 133 133 150 175 200 262 350 175 10 Torque 61 lb in 86 lb in 140 lb in 219 lb in 299 lb in 462 lb in 626 lb in 957 lb in 1610 lb in OHL 417 lb 417 lb 417 lb 417 lb 770 lb 722 lb 738 lb 1060 lb 1758 lb SIZE 150 150 150 150 200 200 262 138 12.67 Torque 79 lb in 111 lb in 179 lb in 279 lb in 376 lb in 575 lb in 800 lb in OHL 832 lb 832 lb 832 lb 832 lb 797 lb 797 lb 1049 lb SIZE 133 133 133 150 175 262 262 350 117 15 Torque 90 lb in 126 lb in 202 lb in 317 lb in 435 lb in 682 lb in 918 lb in 1385 lb in OHL 434 lb 434 lb 434 lb 872 lb 775 lb 1210 lb 1210 lb 1872 lb SIZE 150 150 150 200 200 262 262 97 18 Torque 110lbin 153 lb in 246 lb in 376 lb in 510 lb in 817 lb in 1099 lb in OHL 838 lb 838 lb 838 lb 890 lb 890 lb 1181 lb 1181 lb SIZE 133 133 133 175 175 262 350 350 88 20 Torque 116lbin 162 lb in 258 lb in 408 lb in 553 lb in 896 lb in 1168 lb in 1780 lb in OHL 452 lb 452 lb 452 lb 826 lb 826 lb 1203 lb 2124 lb 2124 lb SIZE 133 133 175 175 262 262 350 350 70 25 Torque 140 lb in 195 lb in 319 lb in 493 lb in 711 lb in 1084 lb in 1422 lb in 2167 lb in OHL 459 lb 459 lb 872 lb 872 lb 1312 lb 1312 lb 2235 lb 2235 lb SIZE 133 133 150 175 262 350 350 58 30 Torque 156 lb in 216 lb in 348 lb in 552 lb in 815 lb in 1226 lb in 1661 lb in OHL 464 lb 464 lb 995 lb 945 lb 1373 lb 2168 lb 2168 lb SIZE 133 133 150 262 262 350 350 44 40 Torque 197 lb in 272 lb in 439 lb in 734 lb in 993 lb in 1516 lb in 2050 lb in OHL 484 lb 484 lb 1108 lb 1428 lb 1428 lb 2425 lb 2425 lb SIZE 150 175 200 262 350 350 35 50 Torque 239 lb in 336 lb in 545 lb in 872 lb in 1184 lb in 1821 lb in OHL 1179 lb 1123 lb 1105 lb 1457 lb 2550 lb 2550 lb SIZE 150 175 200 262 350 350 29 60 Torque 274 lb in 385 lb in 624 lb in 1006 lb in 1366 lb in 2096 lb in OHL 1260 lb 1217 lb 1124 lb 1481 lb 2602 lb 2602 lb Output torque and output overhung load are tabulated for each selection. PAGES G4--5 DIMENSIONS PAGES G4--13-G4--23 PAGES G4--27-G4--36 G4--7

EASY 1.25 SERVICE FACTOR 1750 RPM INPUT MOTOR HORSEPOWER RPM RATIO 0.25 0.33 0.5 0.75 1 1.5 2 3 5 SIZE 133 133 133 133 150 175 175 262 350 350 5 Torque 31 lb in 44 lb in 72 lb in 113lbin 155 lb in 239 lb in 322 lb in 496 lb in 825 lb in OHL 397 lb 397 lb 397 lb 397 lb 644 lb 614 lb 614 lb 866 lb 1556 lb SIZE 150 150 150 150 200 200 262 262 233 7.5 Torque 46 lb in 66 lb in 107 lb in 168 lb in 232 lb in 356 lb in 481 lb in 730 lb in OHL 731 lb 731 lb 731 lb 731 lb 734 lb 734 lb 1015 lb 1015 lb SIZE 133 133 133 150 175 200 262 262 350 175 10 Torque 61 lb in 87 lb in 140 lb in 220 lb in 302 lb in 465 lb in 632 lb in 957 lb in 1610 lb in OHL 417 lb 417 lb 417 lb 770 lb 722 lb 738 lb 1060 lb 1060 lb 1758 lb SIZE 150 150 150 200 200 262 262 138 12.67 Torque 79 lb in 111 lb in 179 lb in 277 lb in 376 lb in 594 lb in 800 lb in OHL 832 lb 832 lb 832 lb 797 lb 797 lb 1049 lb 1049 lb SIZE 133 133 133 175 175 262 262 350 117 15 Torque 90 lb in 126 lb in 202 lb in 320 lb in 435 lb in 682 lb in 918 lb in 1385 lb in OHL 434 lb 434 lb 434 lb 775 lb 775 lb 1210 lb 1210 lb 1872 lb SIZE 150 150 200 200 200 262 97 18 Torque 110lbin 153 lb in 242 lb in 376 lb in 510 lb in 817 lb in OHL 838 lb 838 lb 890 lb 890 lb 890 lb 1181 lb SIZE 133 133 150 175 262 262 350 350 88 20 Torque 116lbin 162 lb in 260 lb in 408 lb in 587 lb in 896 lb in 1168 lb in 1780 lb in OHL 452 lb 452 lb 893 lb 883 lb 1203 lb 1203 lb 2124 lb 2124 lb SIZE 133 133 175 200 262 262 350 70 25 Torque 140 lb in 195 lb in 319 lb in 502 lb in 711 lb in 1084 lb in 1422 lb in OHL 459 lb 459 lb 872 lb 934 lb 1312 lb 1312 lb 2235 lb SIZE 133 150 175 262 262 350 350 58 30 Torque 156 lb in 219 lb in 357 lb in 602 lb in 815 lb in 1226 lb in 1661 lb in OHL 464 lb 995 lb 945 lb 1373 lb 1373 lb 2168 lb 2168 lb SIZE 133 150 200 262 350 350 44 40 Torque 197 lb in 277 lb in 459 lb in 734 lb in 982 lb in 1516 lb in OHL 484 lb 1108 lb 1078 lb 1428 lb 2425 lb 2425 lb SIZE 175 175 262 262 350 350 35 50 Torque 244 lb in 336 lb in 565 lb in 872 lb in 1184 lb in 1821 lb in OHL 1123 lb 1123 lb 1457 lb 1457 lb 2550 lb 2550 lb SIZE 175 200 262 350 350 29 60 Torque 281 lb in 397 lb in 654 lb in 1001 lb in 1366 lb in OHL 1217 lb 1124 lb 1481 lb 2602 lb 2602 lb Output torque and output overhung load are tabulated for each selection. PAGES G4--5 DIMENSIONS PAGES G4--13-G4--23 PAGES G4--27-G4--36 G4--8

EASY 1.50 SERVICE FACTOR 1750 RPM INPUT MOTOR HORSEPOWER RPM RATIO 0.25 0.33 0.5 0.75 1 1.5 2 3 5 SIZE 133 133 133 133 150 175 200 262 350 350 5 Torque 31 lb in 44 lb in 72 lb in 113lbin 155 lb in 239 lb in 326 lb in 496 lb in 825 lb in OHL 397 lb 397 lb 397 lb 397 lb 644 lb 614 lb 615 lb 866 lb 1556 lb SIZE 150 150 150 150 200 262 262 233 7.5 Torque 46 lb in 66 lb in 107 lb in 168 lb in 232 lb in 357 lb in 481 lb in OHL 731 lb 731 lb 731 lb 731 lb 734 lb 1015 lb 1015 lb SIZE 133 133 133 150 175 262 262 350 350 175 10 Torque 61 lb in 87 lb in 140 lb in 220 lb in 302 lb in 469 lb in 632 lb in 951 lb in 1610 lb in OHL 417 lb 417 lb 417 lb 770 lb 722 lb 1060 lb 1060 lb 1758 lb 1758 lb SIZE 150 150 150 200 200 262 262 138 12.67 Torque 79 lb in 111 lb in 179 lb in 277 lb in 376 lb in 594 lb in 782 lb in OHL 832 lb 832 lb 832 lb 797 lb 797 lb 1049 lb 1049 lb SIZE 133 133 150 175 262 262 350 350 117 15 Torque 90 lb in 126 lb in 204 lb in 320 lb in 447 lb in 682 lb in 907 lb in 1385 lb in OHL 434 lb 434 lb 872 lb 775 lb 1210 lb 1210 lb 1872 lb 1872 lb SIZE 150 150 200 200 262 262 97 18 Torque 110lbin 153 lb in 242 lb in 376 lb in 535 lb in 817 lb in OHL 838 lb 838 lb 890 lb 890 lb 1181 lb 1181 lb SIZE 133 133 175 200 262 350 350 350 88 20 Torque 116lbin 162 lb in 263 lb in 414 lb in 587 lb in 862 lb in 1168 lb in 1780 lb in OHL 452 lb 452 lb 826 lb 883 lb 1203 lb 2124 lb 2124 lb 2124 lb SIZE 133 175 175 262 262 350 350 70 25 Torque 140 lb in 200 lb in 319 lb in 524 lb in 711 lb in 1050 lb in 1422 lb in OHL 459 lb 872 lb 872 lb 1312 lb 1312 lb 2235 lb 2235 lb SIZE 133 150 175 262 262 350 350 58 30 Torque 156 lb in 219 lb in 357 lb in 602 lb in 813 lb in 1226 lb in 1661 lb in OHL 464 lb 995 lb 945 lb 1373 lb 1373 lb 2168 lb 2168 lb SIZE 150 150 262 350 350 350 44 40 Torque 200 lb in 277 lb in 476 lb in 715 lb in 982 lb in 1516 lb in OHL 1108 lb 1108 lb 1428 lb 2425 lb 2425 lb 2425 lb SIZE 175 200 262 262 350 350 35 50 Torque 244 lb in 345 lb in 565 lb in 872 lb in 1184 lb in 1821 lb in OHL 1123 lb 1105 lb 1457 lb 1457 lb 2550 lb 2550 lb SIZE 200 262 262 350 350 29 60 Torque 289 lb in 415 lb in 654 lb in 1001 lb in 1366 lb in OHL 1124 lb 1481 lb 1481 lb 2602 lb 2602 lb Output torque and output overhung load are tabulated for each selection. PAGES G4--5 DIMENSIONS PAGES G4--13-G4--23 PAGES G4--27-G4--36 G4--9

USING RATING TABLES Because the efficiency of worm gear speed reducers varies from approximately 60 to 90%, it is important to consider the horsepower/torque conditions at both input and output in a given application. In a situation where motor horsepower is known (e.g., competitive interchange or when a particular motor is available), selection can be done based on input ratings. Where a gearbox is being selected by a designer who knows driven equipment loads, the reducer is selected from the output torque capacity. HORSEPOWER METHOD OF Step 1: Determine Service Factor Referring to the reducer service factor table, determine the appropriate service factor. Step 2: Determine Equivalent Horsepower Multiply the motor horsepower by the service factor obtained in step 1. Step 3: Calculate Required Ratio Divide the motor shaft rpm by the reducer output shaft rpm. Step 4: Determine Unit Size Refer to the rating tables and read across from ratio row and down from motor rpm column to select a unit whose mechanical input horsepower rating meets or exceeds the equivalent horsepower. Step 5: Check Thermal Rating when mechanical input horsepower rating is shaded. Compare the thermal input horsepower rating of the reducer selected to the motor horsepower. Thermal rating should always equal or exceed applied motor horsepower. For continuous duty operation in ambient temperatures above 80 F contact DODGE Engineering. Prime Mover Electric Motor Electric Motor with Frequent Starts and Stops Reducer Service Factors Duration of Service Per Day Occasional 1 / 2 hour Intermittent 2 hours 10 hours 24 hours Occasional 1 / 2 hour Intermittent 2 hours 10 hours 24 hours Driven Machine Load Classification Uniform 0.80 0.90 1.00 1.25 0.90 1.00 1.25 1.50 Medium Shock 0.90 1.00 1.25 1.50 1.00 1.25 1.50 1.75 Heavy Shock 1.00 1.25 1.50 1.75 1.25 1.50 1.75 2.00 Overhung Load To determine overhung load, divide the torque required by the pitch radius of the sprocket, sheave, etc. and multiply by the appropriate factor as follows: Chain Drive 1.00 Synchronous Belt Drive 1.10 Spur or Helical Gear 1.25 V-Belt 1.50 Flat Belt 2.50 The calculated overhung load must not exceed the output overhung load rating. For loads acting at more than one shaft diameter from the seal face use the following conversion factors: Distance in Shaft Diameters from Output Seal Face Multiply Overhung Load Capacity by this Factor 1D 1.00 2D 0.65 3D 0.45 4D 0.35 5D 0.30 PAGES G4--5 EASY PAGES G4--6-G4--9 DIMENSIONS PAGES G4--13-G4--23 PAGES G4--27-G4--36 G4--10

TORQUE METHOD OF Step 1: Determine Service Factor Referring to the reducer service factor table, determine the appropriate service factor. Step 2: Determine Equivalent Torque Multiply the torque required to drive the load at the output of the reducer by the service factor obtained in Step 1. (If drive components, e.g. chain or belt drives, are used between reducer and driven equipment be sure to account for them when calculating output torque at the reducer.) Step 3: Calculate Required Ratio Divide the motor shaft rpm by the reducer output shaft rpm. Step 4: Determine Unit Size Refer to the rating tables and read across from ratio row and down from motor rpm column to select a unit whose mechanical output torque rating meets or exceeds the equivalent torque. Step 6: Select Motor Hp From available motors, select a horsepower that is equal to or greater than the value from Step 5: When the nearest motor horsepower is greater, check service factor at input by dividing rated input horsepower by actual motor horsepower. If the service factor is less than the value from Step 1, a larger reducer may be required. Step 7: Check Thermal Rating Compare the thermal input horsepower rating of the reducer selected to the motor horsepower. Thermal rating should always equal or exceed applied motor horsepower. For continuous duty operation in ambient temperatures above 80 o F contact DODGE Engineering. Step 5: Determine Required Motor Horsepower First, calculate the output horsepower using the following equation where output torque is the torque required to drive the load at the output of the reducer. Output Speed x Output Torque Output HP = 63025 Then calculate the required motor horsepower using the following equation to account for reducer efficiency: Required Motor Horsepower = Output Hp x Rated Input Hp Rated Output Hp PAGES G4--5 EASY PAGES G4--6-G4--9 DIMENSIONS PAGES G4--13-G4--23 PAGES G4--27-G4--36 G4--11

Size A133 MECHANICAL RATINGS INPUT RPM BASIC MOTOR ADAPTER SHAFT RATIO RATING DATA 2500 1750 1450 1170 580 REDUCER 56C 140TC POSITION Output Rpm 500 350 290 234 116 6052010 6052638 6052645 HOLLOW Mechanical Input Hp 1.42 1.13 0.94 0.80 0.50 6050009 6052638 6052645 K1 5 Output Torque (lb in.) 155 175 174 184 226 6050016 6052638 6052645 L1 Mechanical Output Hp 1.23 0.97 0.80 0.68 0.42 6050023 6052638 6052645 LK Output OHL (lbs.) 397 397 397 397 397 Output Rpm 250 175 145 117 58 6052027 6052638 HOLLOW Mechanical Input Hp 1.05 0.80 0.69 0.59 0.34 6050030 6052638 K1 10 Output Torque (lb in.) 218 234 243 254 292 6050047 6052638 L1 Mechanical Output Hp 0.86 0.65 0.56 0.47 0.27 6050054 6052638 LK Output OHL (lbs.) 417 417 417 417 417 Output Rpm 167 117 97 78 39 6052034 6052638 HOLLOW Mechanical Input Hp 0.82 0.63 0.55 0.50 0.25 6050061 6052638 K1 15 Output Torque (lb in.) 242 261 271 304 294 6050078 6052638 L1 Mechanical Output Hp 0.64 0.48 0.42 0.38 0.18 6050085 6052638 LK Output OHL (lbs.) 434 434 434 434 434 Output Rpm 125 88 73 59 29 6052041 6052638 HOLLOW Mechanical Input Hp 0.71 0.54 0.46 0.41 0.21 6050092 6052638 K1 20 Output Torque (lb in.) 264 283 286 311 304 6050108 6052638 L1 Mechanical Output Hp 0.53 0.39 0.33 0.29 0.14 6050115 6052638 LK Output OHL (lbs.) 452 452 452 452 452 Output Rpm 100 70 58 47 23 6052058 6052638 HOLLOW Mechanical Input Hp 0.54 0.39 0.34 0.29 0.17 6050122 6052638 K1 25 Output Torque (lb in.) 238 234 246 257 282 6050139 6052638 L1 Mechanical Output Hp 0.38 0.26 0.23 0.19 0.10 6050146 6052638 LK Output OHL (lbs.) 459 459 459 459 459 Output Rpm 83 58 48 39 19 6052065 6052638 HOLLOW Mechanical Input Hp 0.50 0.41 0.38 0.31 0.17 6050153 6052638 K1 30 Output Torque (lb in.) 243 277 308 305 304 6050160 6052638 L1 Mechanical Output Hp 0.32 0.26 0.24 0.19 0.09 6050177 6052638 LK Output OHL (lbs.) 464 464 464 464 464 Output Rpm 63 44 36 29 15 6052072 6052638 HOLLOW Mechanical Input Hp 0.42 0.34 0.29 0.23 0.12 6050184 6052638 K1 40 Output Torque (lb in.) 249 281 286 276 269 6050191 6052638 L1 Mechanical Output Hp 0.25 0.20 0.16 0.13 0.06 6050207 6052638 LK Output OHL (lbs.) 484 484 484 484 484 Output Rpm 50 35 29 23 12 6052089 6052638 HOLLOW Mechanical Input Hp 0.30 0.23 0.20 0.17 0.11 6050214 6052638 K1 50 Output Torque (lb in.) 204 210 224 236 262 6050221 6052638 L1 Mechanical Output Hp 0.16 0.12 0.10 0.09 0.05 6050238 6052638 LK Output OHL (lbs.) 498 498 498 498 498 Output Rpm 42 29 24 20 10 6052096 6052638 HOLLOW Mechanical Input Hp 0.25 0.19 0.17 0.15 0.09 6050245 6052638 K1 60 Output Torque (lb in.) 187 199 210 220 244 6050252 6052638 L1 Mechanical Output Hp 0.12 0.09 0.08 0.07 0.04 6050269 6052638 LK Output OHL (lbs.) 506 506 506 506 506 NOTE: Shaded ratings are thermally limited. See page G4--24 for thermal capabilities. Basic units do not include required motor adapter. Order appropriate motor adapter along with basic reducer to create a complete assembly. Basic reducers are shipped without a base. Order mounting base kit number SF96061 if required. DIMENSIONS PAGE G4--13 MOUNTING POSTIONS PAGE G4--26 PAGES G4--27-G4--36 G4--12

DIMENSIONS Size A133 45_ 6.41 SOLID OUTPUT 9.00 8.00 4.00 1.94 6.29 6.50 1.33 5.13 3/16 SQ. x1.00lg KEY 1.71 0.6245 ± P.0005 1.62 1.00 4.50.44 3.25 2.00 4--HOLES EQ. 2.12 1.44 SPACED AS SHOWN ON 4.24 2.88 5.875 B.C. 8.53 2.00 4.00 1/4--20 TAP 0.50 DEEP. 8TYP.--4TOP& 4BOTTOM 45_ HOLLOW OUTPUT 6.41 9.00 4.26 2.13 6.29 6.50 1.33 1.71 5.13.44 4--HOLES EQ. SPACED AS SHOWN ON 5.875 B.C. 4.50 1/4--20 TAP 0.50 DEEP. 8TYP.--4TOP& 4BOTTOM 1.62 3.25 2.12 4.24 8.53 0.628 ±P.001 3/16 x 3/32 x 1 CUSTOMER KEYSEAT 3.38 1.00 2.00 1.44 2.88 1.69 NOTE: For input shaft dimensions, refer to page G4--25. PAGE G4--12 MOUNTING POSTIONS PAGE G4--26 PAGES G4--27-G4--36 G4--13

Size A150 MECHANICAL RATINGS INPUT RPM BASIC MOTOR ADAPTER REDUCER SHAFT RATIO RATING DATA 2500 1750 1450 1170 580 56C 140TC POSITION Output Rpm 500 350 290 234 116 6052102 6052652 6052645 HOLLOW Mechanical Input Hp 2.00 1.52 1.32 1.13 0.61 6050276 6052652 6052645 K1 5 Output Torque (lb in.) 223 240 249 263 280 6050283 6052652 6052645 L1 Mechanical Output Hp 1.77 1.33 1.15 0.98 0.52 6050290 6052652 6052645 LK Output OHL (lbs.) 589 644 697 720 886 Output Rpm 333 233 193 156 77 6052119 6052652 6052645 HOLLOW Mechanical Input Hp 1.38 1.13 1.01 0.88 0.52 6050306 6052652 6052645 K1 7.5 Output Torque (lb in.) 224 261 280 301 347 6050313 6052652 6052645 L1 Mechanical Output Hp 1.19 0.97 0.86 0.74 0.43 6050320 6052652 6052645 LK Output OHL (lbs.) 687 731 752 805 856 Output Rpm 250 175 145 117 58 6052126 6052652 6052645 HOLLOW Mechanical Input Hp 1.47 1.13 1.00 0.83 0.50 6050337 6052652 6052645 K1 10 Output Torque (lb in.) 314 341 362 367 436 6050344 6052652 6052645 L1 Mechanical Output Hp 1.25 0.95 0.83 0.68 0.40 6050351 6052652 6052645 LK Output OHL (lbs.) 727 770 793 863 863 Output Rpm 167 117 97 78 39 6052133 6052652 HOLLOW Mechanical Input Hp 1.08 0.81 0.77 0.66 0.34 6050399 6052652 K1 15 Output Torque (lb in.) 327 345 391 412 405 6050405 6052652 L1 Mechanical Output Hp 0.86 0.64 0.60 0.51 0.25 6050412 6052652 LK Output OHL (lbs.) 783 872 872 872 872 Output Rpm 125 88 73 59 29 6052140 6052652 HOLLOW Mechanical Input Hp 0.85 0.71 0.66 0.53 0.30 6050450 6052652 K1 20 Output Torque (lb in.) 325 378 423 414 451 6050467 6052652 L1 Mechanical Output Hp 0.65 0.53 0.49 0.38 0.21 6050474 6052652 LK Output OHL (lbs.) 863 893 893 893 893 Output Rpm 100 70 58 47 23 6052157 6052652 HOLLOW Mechanical Input Hp 0.63 0.46 0.39 0.33 0.19 6050481 6052652 K1 25 Output Torque (lb in.) 292 301 299 315 344 6050498 6052652 L1 Mechanical Output Hp 0.46 0.33 0.27 0.23 0.13 6050504 6052652 LK Output OHL (lbs.) 948 948 948 948 948 Output Rpm 83 58 48 39 19 6052164 6052652 HOLLOW Mechanical Input Hp 0.63 0.52 0.50 0.41 0.22 6050511 6052652 K1 30 Output Torque (lb in.) 315 366 418 416 416 6050528 6052652 L1 Mechanical Output Hp 0.42 0.34 0.32 0.26 0.13 6050535 6052652 LK Output OHL (lbs.) 995 995 995 995 995 Output Rpm 63 44 36 29 15 6052171 6052652 HOLLOW Mechanical Input Hp 0.52 0.50 0.34 0.33 0.17 6050542 6052652 K1 40 Output Torque (lb in.) 327 439 346 413 394 6050559 6052652 L1 Mechanical Output Hp 0.32 0.31 0.20 0.19 0.09 6050566 6052652 LK Output OHL (lbs.) 1074 1108 1108 1108 1108 Output Rpm 50 35 29 23 12 6052188 6052652 HOLLOW Mechanical Input Hp 0.40 0.29 0.26 0.23 0.14 6050573 6052652 K1 50 Output Torque (lb in.) 290 287 305 325 366 6050580 6052652 L1 Mechanical Output Hp 0.23 0.16 0.14 0.12 0.07 6050597 6052652 LK Output OHL (lbs.) 1179 1179 1179 1179 1179 Output Rpm 42 29 24 20 10 6052195 6052652 HOLLOW Mechanical Input Hp 0.30 0.25 0.22 0.19 0.12 6050603 6052652 K1 60 Output Torque (lb in.) 233 274 287 304 341 6050610 6052652 L1 Mechanical Output Hp 0.15 0.13 0.11 0.09 0.05 6050627 6052652 LK Output OHL (lbs.) 1260 1260 1260 1260 1260 NOTE: Shaded ratings are thermally limited. See page G4--24 for thermal capabilities. Basic units do not include required motor adapter. Order appropriate motor adapter along with basic reducer to create a complete assembly. Basic reducers are shipped without a base. Order mounting base kit number SF96062 if required. DIMENSIONS PAGE G4--15 MOUNTING POSTIONS PAGE G4--26 PAGES G4--27-G4--35 G4--14

DIMENSIONS Size A150 45_ 6.42 SOLID OUTPUT 9.08 8.62 4.31 1.94 6.50 1.50 5.73 3/16 SQ. x1.00lg KEY 6.62 1.87 0.7495 ±.0005.44 4--HOLES EQ. SPACED AS SHOWN ON 5.875 B.C. 4.50 1/4--20 TAP 0.50 DEEP. 8TYP.--4TOP& 4BOTTOM 8.92 1.75 3.50 5.00 2.50 2.19 4.38 1.13 2.25 1.52 3.04 45_ HOLLOW OUTPUT 6.42 9.08 4.77 2.39 6.62 6.50 1.50 1.87 5.73.44 4--HOLES EQ. SPACED AS SHOWN ON 5.875 B.C. 4.50 1/4--20 TAP 0.50 DEEP. 8TYP.--4TOP& 4BOTTOM 8.92 1.75 3.50 5.00 2.50 1.003 ±.001 1/4 x 1/8 x 1 CUSTOMER KEYSEAT 3.90 1.13 2.25 1.52 3.04 1.95 NOTE: For input shaft dimensions, refer to page G4--25. PAGE G4--14 MOUNTING POSITIONS PAGE G4--26 PAGES G4--27-G4--35 G4--15

Size A175 MECHANICAL RATINGS INPUT RPM BASIC MOTOR ADAPTER SHAFT RATIO RATING DATA 2500 1750 1450 1170 580 REDUCER 56C 140TC POSITION Output Rpm 500 350 290 234 116 6052201 6052669 6052676 HOLLOW Mechanical Input Hp 3.38 2.63 2.26 2.00 1.10 6050634 6052669 6052676 K1 5 Output Torque (lb in.) 386 426 440 478 515 6050641 6052669 6052676 L1 Mechanical Output Hp 3.06 2.37 2.02 1.78 0.95 6050658 6052669 6052676 LK Output OHL (lbs.) 586 614 628 639 801 Output Rpm 250 175 145 117 58 6052218 6052669 6052676 HOLLOW Mechanical Input Hp 2.22 1.75 1.50 1.16 0.64 6050665 6052669 6052676 K1 10 Output Torque (lb in.) 487 541 555 524 567 6050672 6052669 6052676 L1 Mechanical Output Hp 1.93 1.50 1.28 0.97 0.52 6050689 6052669 6052676 LK Output OHL (lbs.) 688 722 738 824 824 Output Rpm 167 117 97 78 39 6052225 6052669 6052676 HOLLOW Mechanical Input Hp 1.59 1.25 1.01 0.85 0.52 6050696 6052669 6052676 K1 15 Output Torque (lb in.) 499 549 529 542 644 6050702 6052669 6052676 L1 Mechanical Output Hp 1.32 1.02 0.81 0.67 0.40 6050719 6052669 6052676 LK Output OHL (lbs.) 735 775 775 775 775 Output Rpm 125 88 73 59 29 6052232 6052669 6052676 HOLLOW Mechanical Input Hp 1.25 1.00 0.81 0.75 0.45 6050726 6052669 6052676 K1 20 Output Torque (lb in.) 496 553 529 602 694 6050733 6052669 6052676 L1 Mechanical Output Hp 0.98 0.77 0.61 0.56 0.32 6050740 6052669 6052676 LK Output OHL (lbs.) 826 826 826 826 826 Output Rpm 100 70 58 47 23 6052249 6052669 HOLLOW Mechanical Input Hp 1.05 0.79 0.68 0.58 0.29 6050757 6052669 K1 25 Output Torque (lb in.) 502 524 530 555 524 6050764 6052669 L1 Mechanical Output Hp 0.80 0.58 0.49 0.41 0.19 6050771 6052669 LK Output OHL (lbs.) 872 872 872 872 872 Output Rpm 83 58 48 39 19 6052256 6052669 HOLLOW Mechanical Input Hp 0.91 0.75 0.63 0.54 0.33 6050788 6052669 K1 30 Output Torque (lb in.) 485 552 548 573 653 6050795 6052669 L1 Mechanical Output Hp 0.64 0.51 0.42 0.35 0.20 6050801 6052669 LK Output OHL (lbs.) 945 945 945 945 945 Output Rpm 63 44 36 29 15 6052263 6052669 HOLLOW Mechanical Input Hp 0.75 0.58 0.50 0.45 0.25 6050818 6052669 K1 40 Output Torque (lb in.) 499 527 536 607 603 6050825 6052669 L1 Mechanical Output Hp 0.50 0.37 0.31 0.28 0.14 6050832 6052669 LK Output OHL (lbs.) 1016 1058 1058 1058 1058 Output Rpm 50 35 29 23 12 6052270 6052669 HOLLOW Mechanical Input Hp 0.61 0.44 0.38 0.33 0.19 6050849 6052669 K1 50 Output Torque (lb in.) 475 477 471 495 524 6050856 6052669 L1 Mechanical Output Hp 0.38 0.27 0.22 0.18 0.10 6050863 6052669 LK Output OHL (lbs.) 1123 1123 1123 1123 1123 Output Rpm 42 29 24 20 10 6052287 6052669 HOLLOW Mechanical Input Hp 0.41 0.34 0.31 0.27 0.17 6050870 6052669 K1 60 Output Torque (lb in.) 350 402 431 461 524 6050887 6052669 L1 Mechanical Output Hp 0.23 0.19 0.17 0.14 0.08 6050894 6052669 LK Output OHL (lbs.) 1217 1217 1217 1217 1217 NOTE: Shaded ratings are thermally limited. See page G4--24 for thermal capabilities. Basic units do not include required motor adapter. Order appropriate motor adapter along with basic reducer to create a complete assembly. Basic reducers are shipped without a base. Order mounting base kit number SF96063 if required. DIMENSIONS PAGE G4--17 MOUNTING POSITIONS PAGE G4--26 PAGES G4--27-G4--35 G4--16

DIMENSIONS Size A175 45_ 9.61 6.74 SOLID OUTPUT 8.62 4.31 1.75 6.50 1.75 6.10 3/16 SQ. x1.00lg KEY 6.99 1.99 0.8745 ±.0005.44 4--HOLES EQ. SPACED AS SHOWN ON 5.875 B.C. 4.50 5/16--18 TAP 0.75 DEEP. 8TYP.--4TOP& 4BOTTOM 2.09 4.19 2.75 5.50 9.49 4.88 2.44 1.38 2.75 1.78 3.55 45_ HOLLOW OUTPUT 6.74 9.61 5.11 2.56 6.50 1.75 6.10 6.99 1.99.44 4--HOLES EQ. SPACED AS SHOWN ON 5.875 B.C. 4.50 2.09 4.19 2.75 5.50 1.003 ±.001 1/4 x 1/8 x 1--1/4 CUSTOMER KEYSEAT 1.38 2.75 1.78 3.55 5/16--18 TAP 0.75 DEEP. 8TYP.--4TOP& 4BOTTOM 9.49 2.12 4.24 NOTE: For input shaft dimensions, refer to page G4--25. PAGE G4--16 MOUNTING POSITIONS PAGE G4--26 PAGES G4--27-G4--35 G4--17

Size A200 MECHANICAL RATINGS RATIO RATING DATA INPUT RPM MOTOR ADAPTER SHAFT 2500 1750 1450 1170 580 BASIC 56C 140TC 180TC POSITION Output Rpm 500 350 290 234 116 6052294 6052669 6052676 6052683 HOLLOW Mechanical Input Hp 4.35 3.20 3.20 2.63 1.30 6050900 6052669 6052676 K1 5 Output Torque (lb in.) 507 528 636 642 624 6050917 6052669 6052676 L1 Mechanical Output Hp 4.02 2.93 2.93 2.39 1.15 6050924 6052669 6052676 LK Output OHL (lbs.) 627 615 621 689 689 Output Rpm 333 233 193 156 77 6052300 6052669 6052676 HOLLOW Mechanical Input Hp 2.88 2.06 1.89 1.75 0.90 6050931 6052669 6052676 K1 7.5 Output Torque (lb in.) 488 493 543 620 624 6050948 6052669 6052676 L1 Mechanical Output Hp 2.58 1.83 1.67 1.53 0.77 6050955 6052669 6052676 LK Output OHL (lbs.) 701 734 787 808 906 Output Rpm 250 175 145 117 58 6052317 6052669 6052676 HOLLOW Mechanical Input Hp 2.53 2.00 1.88 1.51 0.93 6050962 6052669 6052676 K1 10 Output Torque (lb in.) 560 626 704 695 837 6050979 6052669 6052676 L1 Mechanical Output Hp 2.22 1.74 1.62 1.29 0.77 6050986 6052669 6052676 LK Output OHL (lbs.) 735 738 795 823 823 Output Rpm 197 138 114 92 46 6052324 6052669 6052676 HOLLOW Mechanical Input Hp 2.06 1.62 1.51 1.22 0.83 6050993 6052669 6052676 K1 12.67 Output Torque (lb in.) 562 624 696 693 908 6051006 6052669 6052676 L1 Mechanical Output Hp 1.76 1.37 1.26 1.01 0.66 6051013 6052669 6052676 LK Output OHL (lbs.) 764 797 797 797 797 Output Rpm 167 117 97 78 39 6052331 6052669 6052676 HOLLOW Mechanical Input Hp 1.81 1.40 1.33 1.13 0.75 6051020 6052669 6052676 K1 15 Output Torque (lb in.) 573 624 711 737 949 6051037 6052669 6052676 L1 Mechanical Output Hp 1.52 1.16 1.09 0.91 0.58 6051044 6052669 6052676 LK Output OHL (lbs.) 793 892 892 892 892 Output Rpm 139 97 81 65 32 6052348 6052669 6052676 HOLLOW Mechanical Input Hp 1.53 1.25 1.14 0.92 0.65 6051051 6052669 6052676 K1 18 Output Torque (lb in.) 563 644 700 696 929 6051068 6052669 6052676 L1 Mechanical Output Hp 1.24 0.99 0.89 0.71 0.48 6051075 6052669 6052676 LK Output OHL (lbs.) 846 890 890 890 890 Output Rpm 125 88 73 59 29 6052355 6052669 6052676 HOLLOW Mechanical Input Hp 1.41 1.13 1.06 0.88 0.62 6051082 6052669 6052676 K1 20 Output Torque (lb in.) 570 638 711 729 977 6051099 6052669 6052676 L1 Mechanical Output Hp 1.13 0.89 0.82 0.67 0.45 6051105 6052669 6052676 LK Output OHL (lbs.) 883 883 883 883 883 Output Rpm 100 70 58 47 23 6052362 6052669 6052676 HOLLOW Mechanical Input Hp 1.20 0.94 0.88 0.78 0.42 6051112 6052669 6052676 K1 25 Output Torque (lb in.) 583 639 707 774 782 6051129 6052669 6052676 L1 Mechanical Output Hp 0.93 0.71 0.65 0.57 0.29 6051136 6052669 6052676 LK Output OHL (lbs.) 934 934 934 934 934 Output Rpm 83 58 48 39 19 6052379 6052669 HOLLOW Mechanical Input Hp 1.02 0.83 0.77 0.65 0.43 6051143 6052669 K1 30 Output Torque (lb in.) 551 624 689 702 868 6051150 6052669 L1 Mechanical Output Hp 0.73 0.58 0.53 0.43 0.27 6051167 6052669 LK Output OHL (lbs.) 1008 1008 1008 1008 1008 Output Rpm 63 44 36 29 15 6052386 6052669 HOLLOW Mechanical Input Hp 0.82 0.67 0.64 0.55 0.35 6051174 6052669 K1 40 Output Torque (lb in.) 556 628 714 748 873 6051181 6052669 L1 Mechanical Output Hp 0.55 0.44 0.41 0.34 0.20 6051198 6052669 LK Output OHL (lbs.) 1078 1078 1078 1078 1078 Output Rpm 50 35 29 23 12 6052393 6052669 HOLLOW Mechanical Input Hp 0.71 0.58 0.54 0.41 0.23 6051204 6052669 K1 50 Output Torque (lb in.) 566 639 700 646 659 6051211 6052669 L1 Mechanical Output Hp 0.45 0.36 0.32 0.24 0.12 6051228 6052669 LK Output OHL (lbs.) 1105 1105 1105 1105 1105 Output Rpm 42 29 24 20 10 6052409 6052669 HOLLOW Mechanical Input Hp 0.58 0.50 0.44 0.35 0.19 6051235 6052669 K1 60 Output Torque (lb in.) 528 624 647 624 624 6051242 6052669 L1 Mechanical Output Hp 0.35 0.29 0.25 0.19 0.10 6051259 6052669 LK Output OHL (lbs.) 1124 1124 1124 1124 1124 NOTE: Shaded ratings are thermally limited. See page G4--24 for thermal capabilities. Basic units do not include required motor adapter. Order appropriate motor adapter along with basic reducer to create a complete assembly. Basic reducers are shipped without a base. Order mounting base kit number SF96064 if required. DIMENSIONS PAGE G4--19 MOUNTING POSITIONS PAGE G4--26 PAGES G4--27-G4--35 G4--18

DIMENSIONS Size A200 9.89 10.93 6.89 7.93 SOLID OUTPUT 9.38 4.69 2.19 6.50 9.06 7.49 8.77 2.00 6.62 1/4 SQ. x1--1/4 KEY 2.24 0.9995 ±.0005 0.44 0.53 4--HOLES EQ. SPACED AS SHOWN ON 5.875 B.C. 7.250 B.C. 4.50 8.50 3/8--16 TAP 0.74 DEEP. 8TYP.--4TOP& 4BOTTOM 5.00 5.91 2.50 3.00 DIMENSIONS IN BLOCKS APPLY WHEN 180 FRAME MOTOR ADAPTER PLATE IS IN PLACE. 4.88 2.44 1.44 2.88 1.91 3.81 45_ HOLLOW OUTPUT 6.89 7.93 9.89 10.93 5.35 2.69 6.50 9.06 7.49 8.77 2.00 6.62 2.24 0.44 0.53 4--HOLES EQ. SPACED AS SHOWN ON 5.875 B.C. 7.250 B.C. 4.50 8.50 3/8--16 TAP 0.74 DEEP. 8TYP.--4TOP& 4BOTTOM 5.00 5.91 2.50 3.00 1.440 ±.001 3/8 x 3/16 x 2 CUSTOMER KEYSEAT DIMENSIONS IN BLOCKS APPLY WHEN 180 FRAME MOTOR ADAPTER PLATE IS IN PLACE. 4.24 2.12 1.44 2.88 1.91 3.81 NOTE: For input shaft dimensions, refer to page G4--25. PAGE G4--18 MOUNTING POSITIONS PAGE G4--26 PAGES G4--27-G4--35 G4--19

Size A262 MECHANICAL RATINGS INPUT RPM RATIO RATING DATA 2500 1750 1450 1170 580 MOTOR ADAPTER SHAFT BASIC REDUCER 56C 140TC 180TC POSITION Output Rpm 500 350 290 234 116 6052416 6052690 6052706 6052713 HOLLOW Mechanical Input Hp 5.97 5.00 4.65 4.26 3.00 6051266 6052690 6052706 6052713 K1 5 Output Torque (lb in.) 699 829 927 1048 1454 6051273 6052690 6052706 6052713 L1 Mechanical Output Hp 5.55 4.61 4.27 3.89 2.68 6051280 6052690 6052706 6052713 LK Output OHL (lbs.) 833 866 922 990 1040 Output Rpm 333 233 193 156 77 6052423 6052690 6052706 6052713 HOLLOW Mechanical Input Hp 4.85 4.06 4.02 3.46 1.85 6051297 6052690 6052706 6052713 K1 7.5 Output Torque (lb in.) 837 993 1184 1253 1312 6051303 6052690 6052706 6052713 L1 Mechanical Output Hp 4.43 3.68 3.63 3.10 1.61 6051310 6052690 6052706 6052713 LK Output OHL (lbs.) 966 1015 968 1058 1183 Output Rpm 250 175 145 117 58 6052430 6052690 6052706 6052713 HOLLOW Mechanical Input Hp 4.25 3.75 3.50 2.78 2.05 6051327 6052690 6052706 6052713 K1 10 Output Torque (lb in.) 962 1201 1348 1312 1891 6051334 6052690 6052706 6052713 L1 Mechanical Output Hp 3.82 3.34 3.10 2.44 1.74 6051341 6052690 6052706 6052713 LK Output OHL (lbs.) 1014 1060 1083 1193 1193 Output Rpm 197 138 114 92 46 6052447 6052690 6052706 HOLLOW Mechanical Input Hp 3.54 3.03 2.77 2.27 1.50 6051358 6052690 6052706 K1 12.67 Output Torque (lb in.) 989 1197 1312 1312 1739 6051365 6052690 6052706 L1 Mechanical Output Hp 3.10 2.62 2.38 1.92 1.26 6051372 6052690 6052706 LK Output OHL (lbs.) 1049 1049 1049 1049 1049 Output Rpm 167 117 97 78 39 6052454 6052690 6052706 HOLLOW Mechanical Input Hp 3.15 2.73 2.50 2.00 1.54 6051389 6052690 6052706 K1 15 Output Torque (lb in.) 1032 1261 1380 1346 2007 6051396 6052690 6052706 L1 Mechanical Output Hp 2.73 2.33 2.12 1.67 1.23 6051402 6052690 6052706 LK Output OHL (lbs.) 1082 1210 1210 1210 1210 Output Rpm 139 97 81 65 32 6052461 6052690 6052706 HOLLOW Mechanical Input Hp 2.69 2.35 2.00 1.63 1.01 6051419 6052690 6052706 K1 18 Output Torque (lb in.) 1052 1296 1315 1312 1573 6051426 6052690 6052706 L1 Mechanical Output Hp 2.32 2.00 1.68 1.35 0.80 6051433 6052690 6052706 LK Output OHL (lbs.) 1181 1181 1181 1181 1181 Output Rpm 125 88 73 59 29 6052478 6052690 6052706 HOLLOW Mechanical Input Hp 2.44 2.13 1.81 1.50 0.93 6051440 6052690 6052706 K1 20 Output Torque (lb in.) 1046 1285 1302 1325 1580 6051457 6052690 6052706 L1 Mechanical Output Hp 2.07 1.79 1.50 1.23 0.73 6051464 6052690 6052706 LK Output OHL (lbs.) 1203 1203 1203 1203 1203 Output Rpm 100 70 58 47 23 6052485 6052690 6052706 HOLLOW Mechanical Input Hp 2.07 1.88 1.52 1.25 0.65 6051471 6052690 6052706 K1 25 Output Torque (lb in.) 1071 1367 1312 1320 1309 6051488 6052690 6052706 L1 Mechanical Output Hp 1.70 1.52 1.21 0.98 0.48 6051495 6052690 6052706 LK Output OHL (lbs.) 1265 1312 1312 1312 1312 Output Rpm 83 58 48 39 19 6052492 6052690 6052706 HOLLOW Mechanical Input Hp 1.91 1.59 1.34 1.13 0.60 6051501 6052690 6052706 K1 30 Output Torque (lb in.) 1127 1312 1312 1346 1341 6051518 6052690 6052706 L1 Mechanical Output Hp 1.49 1.21 1.01 0.83 0.41 6051525 6052690 6052706 LK Output OHL (lbs.) 1373 1373 1373 1373 1373 Output Rpm 63 44 36 29 15 6052508 6052690 6052706 HOLLOW Mechanical Input Hp 1.74 1.01 1.01 0.92 0.75 6051532 6052690 6052706 K1 40 Output Torque (lb in.) 1264 1003 1193 1312 1974 6051549 6052690 6052706 L1 Mechanical Output Hp 1.25 0.70 0.69 0.61 0.45 6051556 6052690 6052706 LK Output OHL (lbs.) 1418 1428 1428 1428 1428 Output Rpm 50 35 29 23 12 6052515 6052690 6052706 HOLLOW Mechanical Input Hp 1.49 1.13 0.94 0.79 0.50 6051563 6052690 6052706 K1 50 Output Torque (lb in.) 1291 1339 1312 1312 1517 6051570 6052690 6052706 L1 Mechanical Output Hp 1.02 0.74 0.60 0.49 0.28 6051587 6052690 6052706 LK Output OHL (lbs.) 1444 1457 1457 1457 1457 Output Rpm 42 29 24 20 10 6052522 6052690 HOLLOW Mechanical Input Hp 1.16 0.88 0.83 0.69 0.38 6051594 6052690 K1 60 Output Torque (lb in.) 1146 1190 1312 1312 1312 6051600 6052690 L1 Mechanical Output Hp 0.76 0.55 0.50 0.41 0.20 6051617 6052690 LK Output OHL (lbs.) 1481 1481 1481 1481 1481 NOTE: Shaded ratings are thermally limited. See page G4--24 for thermal capabilities. Basic units do not include required motor adapter. Order appropriate motor adapter along with basic reducer to create a complete assembly. Basic reducers are shipped without a base. Order mounting base kit number SF96065 if required. DIMENSIONS PAGE G4--21 MOUNTING POSITIONS PAGE G4--26 PAGES G4--27-G4--35 G4--20

DIMENSIONS Size A262 11.80 12.80 8.11 9.11 SOLID OUTPUT 11.25 5.63 2.50 6.50 9.00 8.74 9.99 2.625 8.61 1/4 SQ. x1--1/4 KEY 0.44 0.53 4--HOLES EQ. SPACED AS SHOWN ON 5.875 B.C. 7.250 B.C. 4.50 8.50 3/8--16 TAP 0.69 DEEP. 8TYP.--4TOP& 4BOTTOM 6.38 7.38 3.19 3.69 2.87 DIMENSIONS IN BLOCKS APPLY TO 180 FRAME MOTOR ADAPTER. 2.12 4.25 2.94 5.88 1.69 3.38 1.1245 ±.0005 45_ HOLLOW OUTPUT 11.80 12.80 8.11 9.11 6.62 3.31 6.50 9.00 8.74 9.99 2.625 8.61 0.44 0.53 4--HOLES EQ. SPACED AS SHOWN ON 5.875 B.C. 4.50 8.50 3.19 3/8--16 TAP 6.38 0.69 DEEP. 3.69 1.941 ±.001 8TYP.--4TOP& 7.38 1/2 x 1/4 x 2--1/2 7.250 B.C. 4BOTTOM CUSTOMER KEYSEAT 2.87 DIMENSIONS IN BLOCKS APPLY TO 180 FRAME MOTOR ADAPTER. 2.12 4.25 2.79 5.57 1.69 3.38 NOTE: For input shaft dimensions, refer to page G4--25. PAGE G4--20 MOUNTING POSITIONS PAGE G4--26 PAGES G4--27-G4--35 G4--21

Size A350 MECHANICAL RATINGS RATIO RATING DATA INPUT RPM 2500 1750 1450 1170 580 BASIC MOTOR ADAPTER SHAFT REDUCER 56C 140TC 180TC POSITION Output Rpm 500 350 290 234 116 6052539 6052690 6052706 6052713 HOLLOW Mechanical Input Hp 12.55 10.00 8.78 7.64 4.81 6051624 6052690 6052706 6052713 K1 5 Output Torque (lb in.) 1481 1672 1764 1893 2351 6051631 6052690 6052706 6052713 L1 Mechanical Output Hp 11.75 9.29 8.12 7.03 4.33 6051648 6052690 6052706 6052713 LK Output OHL (lbs.) 1478 1556 1592 1647 1790 Output Rpm 250 175 145 117 58 6052546 6052690 6052706 6052713 HOLLOW Mechanical Input Hp 9.03 7.63 7.01 6.48 4.52 6051686 6052690 6052706 6052713 K1 10 Output Torque (lb in.) 2073 2476 2730 3052 4123 6051693 6052690 6052706 6052713 L1 Mechanical Output Hp 8.22 6.88 6.28 5.67 3.79 6051709 6052690 6052706 6052713 LK Output OHL (lbs.) 1669 1758 1859 1994 1994 Output Rpm 167 117 97 78 39 6052560 6052690 6052706 6052713 HOLLOW Mechanical Input Hp 6.80 5.36 5.00 4.55 3.24 6051747 6052690 6052706 6052713 K1 15 Output Torque (lb in.) 2263 2512 2852 3142 4318 6051754 6052690 6052706 6052713 L1 Mechanical Output Hp 5.99 4.65 4.38 3.89 2.66 6051761 6052690 6052706 6052713 LK Output OHL (lbs.) 1887 1872 1986 2161 2020 Output Rpm 125 88 73 59 29 6052577 6052690 6052706 6052713 HOLLOW Mechanical Input Hp 5.58 4.63 4.12 3.75 2.50 6051839 6052690 6052706 6052713 K1 20 Output Torque (lb in.) 2391 2776 2954 3292 4176 6051846 6052690 6052706 6052713 L1 Mechanical Output Hp 4.74 3.85 3.40 3.06 1.92 6051853 6052690 6052706 6052713 LK Output OHL (lbs.) 1872 2124 2124 2124 2124 Output Rpm 100 70 58 47 23 6052584 6052690 6052706 6052713 HOLLOW Mechanical Input Hp 4.70 4.00 3.55 3.17 2.09 6051860 6052690 6052706 6052713 K1 25 Output Torque (lb in.) 2445 2911 3077 3367 4189 6051877 6052690 6052706 6052713 L1 Mechanical Output Hp 3.88 3.23 2.83 2.50 1.54 6051884 6052690 6052706 6052713 LK Output OHL (lbs.) 2084 2235 2235 2235 2235 Output Rpm 83 58 48 39 19 6052591 6052690 6052706 6052713 HOLLOW Mechanical Input Hp 4.09 3.50 3.09 2.78 1.81 6051891 6052690 6052706 6052713 K1 30 Output Torque (lb in.) 2486 2966 3125 3420 4189 6051907 6052690 6052706 6052713 L1 Mechanical Output Hp 3.29 2.75 2.40 2.12 1.29 6051914 6052690 6052706 6052713 LK Output OHL (lbs.) 2168 2168 2168 2168 2168 Output Rpm 63 44 36 29 15 6052607 6052690 6052706 HOLLOW Mechanical Input Hp 3.20 2.70 2.50 2.25 1.94 6051921 6052690 6052706 K1 40 Output Torque (lb in.) 2406 2797 3074 3366 3754 6051938 6052690 6052706 L1 Mechanical Output Hp 2.39 1.94 1.77 1.56 1.30 6051945 6052690 6052706 LK Output OHL (lbs.) 2319 2425 2425 2425 2425 Output Rpm 50 35 29 23 12 6052614 6052690 6052706 HOLLOW Mechanical Input Hp 2.73 2.31 2.12 2.00 1.30 6051952 6052690 6052706 K1 50 Output Torque (lb in.) 2453 2852 3091 3554 4189 6051969 6052690 6052706 L1 Mechanical Output Hp 1.95 1.58 1.42 1.32 0.77 6051976 6052690 6052706 LK Output OHL (lbs.) 2550 2550 2550 2550 2550 Output Rpm 42 29 24 20 10 6052621 6052690 6052706 HOLLOW Mechanical Input Hp 2.39 1.85 1.75 1.57 1.14 6051983 6052690 6052706 K1 60 Output Torque (lb in.) 2474 2602 2918 3155 4126 6051990 6052690 6052706 L1 Mechanical Output Hp 1.64 1.20 1.12 0.98 0.63 6052003 6052690 6052706 LK Output OHL (lbs.) 2591 2602 2602 2602 2602 NOTE: Shaded ratings are thermally limited. See page G4--24 for thermal capabilities. Basic units do not include required motor adapter. Order appropriate motor adapter along with basic reducer to create a complete assembly. Basic reducers are shipped without a base. Order mounting base kit number SF96066 if required. DIMENSIONS PAGE G4--23 MOUNTING POSITIONS PAGE G4--26 PAGES G4--27-G4--35 G4--22

DIMENSIONS Size A350 45_ 13.62 14.62 9.18 10.18 SOLID OUTPUT 14.12 7.07 3.12 6.50 9.00 3.50 3/8 SQ. x2--1/4 KEY 0.44 0.53 4--HOLES EQ. SPACED AS SHOWN ON 5.875 B.C. 7.250 B.C. 4.50 8.50 10.74 11.99 7/16--14 TAP 0.75 DEEP. 8TYP.--4TOP& 4BOTTOM 7.50 8.88 3.75 4.44 3.99 10.57 DIMENSIONS IN BLOCKS APPLY TO 180 FRAME MOTOR ADAPTER. 2.00 4.00 2.50 5.00 3.69 7.38 1.4995 ± 0.0005 45_ HOLLOW OUTPUT 13.62 14.62 9.18 10.18 7.37 3.69 6.50 9.00 3.50 0.44 0.53 4--HOLES EQ. SPACED AS SHOWN ON 5.875 B.C. 7.250 B.C. 4.50 8.50 10.74 11.99 7/16--14 TAP 0.75 DEEP. 8TYP.--4TOP& 4BOTTOM 7.50 8.88 3.75 4.44 3.99 DIMENSIONS IN BLOCKS APPLY TO 180 FRAME MOTOR ADAPTER. 10.57 2.191 ±.001 1/2 x 1/4 x 3--5/8 CUSTOMER KEYSEAT 2.00 4.00 2.50 5.00 3.16 6.32 NOTE: For input shaft dimensions, refer to page G4--25. PAGES G4--22 MOUNTING POSITIONS PAGE G4--26 PAGES G4--27-G4--35 G4--23

INPUT THERMAL HP RATINGS CASE SIZE RATIO INPUT RPM 133 150 175 200 262 350 2500 1.36 1.59 2.14 2.65 5.00 6.95 1750 1.13 1.52 2.55 3.00 5.00 6.61 5 1450 0.94 1.32 2.26 2.63 4.64 6.48 1170 0.80 1.13 2.00 2.59 4.37 6.35 580 0.50 0.61 1.10 1.30 3.00 5.22 2500 -- 1.38 -- 2.18 3.66 -- 1750 -- 1.13 -- 2.06 3.67 -- 7.5 1450 -- 1.01 -- 1.89 3.57 -- 1170 -- 0.88 -- 1.75 3.46 -- 580 -- 0.52 -- 0.90 1.85 -- 2500 1.05 1.29 1.68 2.00 3.38 5.50 1750 0.80 1.13 1.70 2.00 3.00 5.10 10 1450 0.69 1.00 1.50 1.78 2.95 4.90 1170 0.59 0.83 1.16 1.51 2.78 4.71 580 0.34 0.50 0.64 0.93 2.10 4.19 2500 -- -- -- 1.66 3.16 -- 1750 -- -- -- 1.61 3.03 -- 12.67 1450 -- -- -- 1.51 2.77 -- 1170 -- -- -- 1.22 2.27 -- 580 -- -- -- 0.83 1.50 -- 2500 0.82 1.03 1.41 1.50 2.70 4.08 1750 0.63 0.81 1.25 1.40 2.43 3.79 15 1450 0.55 0.77 1.01 1.33 2.30 3.78 1170 0.50 0.66 0.85 1.13 2.00 3.78 580 0.25 0.34 0.52 0.75 1.54 3.24 2500 -- -- -- 1.32 2.69 -- 1750 -- -- -- 1.25 2.35 -- 18 1450 -- -- -- 1.14 2.00 -- 1170 -- -- -- 0.92 1.63 -- 580 -- -- -- 0.65 1.01 -- 2500 0.71 0.85 1.16 1.30 2.44 3.36 1750 0.54 0.71 1.00 1.13 2.29 3.15 20 1450 0.46 0.66 0.81 1.06 1.81 3.04 1170 0.41 0.53 0.75 0.88 1.50 3.00 580 0.21 0.30 0.45 0.62 0.93 2.49 2500 0.54 0.63 1.05 1.12 2.05 3.16 1750 0.39 0.46 0.79 0.94 1.88 3.00 25 1450 0.34 0.39 0.68 0.88 1.52 2.90 1170 0.29 0.33 0.58 0.78 1.25 2.81 580 0.17 0.19 0.29 0.42 0.65 2.09 2500 0.50 0.63 0.83 0.90 1.69 3.00 1750 0.41 0.52 0.75 0.83 1.57 2.70 30 1450 0.38 0.50 0.63 0.77 1.34 2.70 1170 0.31 0.41 0.54 0.65 1.13 2.70 580 0.17 0.22 0.33 0.43 0.60 1.81 2500 0.42 0.52 0.73 0.79 1.32 2.09 1750 0.34 0.50 0.58 0.67 1.01 2.00 40 1450 0.29 0.34 0.50 0.64 1.01 2.13 1170 0.23 0.33 0.45 0.55 0.92 2.25 580 0.12 0.17 0.25 0.35 0.75 1.94 2500 0.30 0.40 0.61 0.71 1.00 2.00 1750 0.23 0.29 0.44 0.58 0.92 1.80 50 1450 0.20 0.26 0.38 0.54 0.88 1.55 1170 0.17 0.23 0.33 0.41 0.79 1.30 580 0.11 0.14 0.19 0.23 0.50 1.13 2500 0.25 0.30 0.41 0.58 1.08 1.82 1750 0.19 0.25 0.34 0.50 0.88 1.67 60 1450 0.17 0.22 0.31 0.44 0.83 1.41 1170 0.15 0.19 0.27 0.35 0.69 1.16 580 0.09 0.12 0.17 0.19 0.38 1.05 PAGE G4--5 PAGES G4--10-G4--22 MOUNTING POSTIONS PAGES G4--26 PAGES G4--27-G4--35 G4--24

DIMENSIONS INPUT SHAFT DIMENSIONS B A C D E F Case Size A B* C D E(Key) F (Keyway Length) 133 2.81 0.96 0.81 0.625 +.0000 / --.0006 3/16 Square 0.68 150 2.82 0.96 0.81 0.625 +.0000 / --.0006 3/16 Square 0.68 175 3.14 0.96 0.81 0.750 +.0000 / --.0006 3/16 Square 0.68 200 3.29 0.96 0.81 0.750 +.0000 / --.0006 3/16 Square 0.68 262 4.31 1.11 1.06 0.875 +.0000 / --.0006 3/16 Square 0.93 350 5.38 1.11 1.06 0.875 +.0000 / --.0006 3/16 Square 0.93 * ± 1/32 PAGE G4--5 PAGES G4--10-G4--22 MOUNTING POSTIONS PAGES G4--26 PAGES G4--27-G4--35 G4--25

MOUNTING POSITIONS K1 L1 LK S1 K2 K4 K5 L2 L4 L5 S2 S4 S5 DIMENSIONS PAGES G4--13-G4--23 PAGES G4--27-G4--35 G4--26

MODIFICATIONS/ ACCESSORIES MOTOR ADAPTER KIT The basic reducers listed in the ratings tables on pages G4--12 -- G4--22 do not include the required motor adapter. In order to create a complete reducer assembly, order a basic reducer and one of the motor adapters which are also listed in the ratings tables and in the table at right. Each kit includes the motor adapter and required mounting hardware, a flexible 3 piece coupling and motor mounting bolts. Adaptable TIGEAR reducers are designed for coupled input service. For belted input requirements, refer to Seperate TIGEAR on pages G3--28 to G3--29. 56C 140TC 180TC A133 6052638 6052645 -- A150 6052652 6052645 -- A175 6052669 6052676 -- A200 6052669 6052676 6052683 A262 6052690 6052706 6052713 A350 6052690 6052706 6052713 Motor Adapter (Includes 3--piece coupling and mounting hardware) Basic Reducer PAGE G4--5 PAGES G4--10-G4--24 ENGINEERING/TECHNICAL PAGES G4--42-G4--43 G4--27

MODIFICATIONS/ ACCESSORIES IEC METRIC MOTOR ADAPTER KIT IEC Metric motor adapters are available with B5 flanges. Each kit includes the motor adapter and mounting hardware, a flexible 3-piece coupling and motor mounting bolts. G(DIA.) Reducer Size IEC Adapter Size Kit Number A133-150 IEC71 6052720 A133-150 IEC80 6052737 A133-150 IEC90 6052744 A175-200 IEC71 6052751 A175-200 IEC80 6052768 A175-200 IEC90 6052775 A262-350 IEC71 6052782 A262-350 IEC80 6052799 A262-350 IEC90 6052805 A262-350 IEC100/112 6052812 B A C(DIA.) D F(DIA.) E SIZE FRAME A B C D E F G A133 71 80 90 5.59 5.57 5.96 8.18 8.16 8.55 6.30 7.87 7.87 6.19 6.98 6.98 130 MM 165 MM 165 MM M8 TAP 11 11 110 MM 130 MM 130 MM A150 71 80 90 5.60 5.99 6.38 8.26 8.49 8.88 6.30 7.87 7.87 6.51 7.31 7.31 130 MM 165 MM 165 MM M8 TAP 11 11 110 MM 130 MM 130 MM A175 71 80 90 5.92 6.28 6.70 8.79 9.15 9.57 6.30 7.87 7.87 6.89 7.31 7.31 130 MM 165 MM 165 MM M8 TAP 11 11 110 MM 130 MM 130 MM A200 71 80 90 6.06 6.43 6.84 9.06 9.43 9.84 6.30 7.87 7.87 7.34 8.17 8.17 130 MM 165 MM 165 MM M8 TAP 11 11 110 MM 130 MM 130 MM A262 71 80 90 10/112 7.24 7.64 8.03 8.54 10.93 11.33 11.72 12.23 6.30 7.87 7.87 9.85 8.65 9.41 9.41 10.41 130 MM 165 MM 165 MM 215 MM M8 TAP 11 11 14 110 MM 130 MM 130 MM 180 MM A350 71 80 90 100/112 8.31 8.71 9.10 9.61 12.75 13.15 13.54 14.05 6.30 7.87 7.87 9.85 10.64 11.42 11.42 12.41 130 MM 165 MM 165 MM 215 MM M8 TAP 11 11 14 110 MM 130 MM 130 MM 180 MM PAGE G4--5 ENGINEERING/TECHNICAL PAGES G4--42-G4--43 G4--28