APG Updated APG
|
|
- Barrie Thomas
- 6 years ago
- Views:
Transcription
1 MASTER CONTENTS Updated Contents Features / Benefits...-2 Specification...-4 How To Order...-4 Nomenclature...-6 Selection Gearmotors C-Face and Separate Reducers Dimensions Gearmotors C-Face Reducers Separate Reducers Mounting Positions Gearmotors C-Face Reducers Separate Reducers Engineering / Technical MASTER XL COMBOGEAR MOTO DRIVE ULTIMA ULTIMA PULLEYS -1
2 FEATURES/BENEFITS MASTER MASTER XL American Parallel Gearing High Power Density means lower initial costs through... Smallest possible envelope Riser blocks accomodate multiple motor frames per reducer size OPTIMIZED GEAR GEOMETRY Reduced helix angle for less thrust Case-carburized and precision-ground helical gears MINIMUM BEARING SPANS Mid-case bearing supports for less shaft deflection 5000 hours L10 life at full-rated load Features / Benefits USER FRIENDLY Shipped installation ready Factory filled with long life synthetic lube Modular design inputs for easy field modifications RUGGED DESIGN with ease of service features Designed with service in mind Easy access to seals & internal components No special tooling required to service Never a throw away with routine service practices Service support & parts available through nationwide distribution network Detailed service and repair manual online at COMBOGEAR CAST IRON HOUSING Computer modeled Low profile ULTIMA PULLEYS MOTO DRIVE PATENTED COUPLING SYSTEM The patented C-adapter utilizes a cross split, keyed hollow bore and a clamp collar to reduce fretting corrosion. Easy C-face motor removal is the result. -2
3 MASTER High power density FHP through 75 HP 1.2 through 129.7:1 AGMA ratios C-face reducers Integral gearmotors Shaft-in separate reducers Foot or flange mounts User friendly for lower operational costs USDA approved finish Factory filled with premium lubricant - USDA H2 approved High efficiency - 98% per gear stage Easy C-face motor installation/removal Durable design and maintainable Easy access to seals and internal parts from both ends of the reducer Pry slots on end covers Joint sealant - eliminates leaking gaskets Extended routine service cycles Other available options NEW! Pre-Engineered variable speed packages with preassembled motor and gearboxes, matched with a versatile Variable Frequency Drive in a NEMA 4X/12 enclosure. Available in several versions and common voltages: - upsize horsepower rated packages through 50 HP - drop-in replacement for the Reeves MotoDrive. The Reeves INNOVAdrive is an identical foot-print and shaft location replacement for 1/2 HP through 7-1/2 HP Reeves MotoDrive Available now. On-Line catalog coming soon. Call for details, ratings and CAD drawings. Premium/special purpose motors: -Energy efficient motors -Brakemotors -Washdown motors - Servo and synchronous motor compatibility flanges High ratio capability XT-washdown gearcase option Premium E-Z KLEEN modification - Nylon 11 coated housing - Stainless steel hardware - Electroless nickel plated output shaft Designed For Your Needs FEATURES/BENEFITS C-Face Reducer Separate Reducer Gearmotor E-Z KLEEN C-Face Gearmotor MASTER XL COMBOGEAR MOTO DRIVE ULTIMA PULLEYS -3
4 SPECIFICATION - HOW TO ORDER MASTER MASTER XL COMBOGEAR The Speed Reducer shall be suitable for C-face, separate, or integral gearmotor construction in either base or output flange mountings, and available in single, double, or triple reduction ratios. The reducer housing and covers shall be constructed of corrosion resistant, class 30 gray iron with cast internal ribbing for added strength. All housings and end covers shall be either doweled or tenoned, and precision machined to assure accurate alignment for all gear sets. Gearing shall be of single helical design, and crown shaved or ground to provide an ellipsoid tooth form to eliminate tooth end wearing and assure meshing in the strongest tooth area. All gears shall be case carburized to insure a high surface durability and resilient tooth core for greater impact resistance and longer service life. Specification HOW TO ORDER Reducers and Gearmotors have part numbers assigned that can be found on the selection pages. Refer to the part number when ordering. Always specify mounting position if other than standard, and specify flange mounting and accessories/ modifications, if required. The input pinion shall be of the shank pinion design that is assembled by being pressed and cross pinned into place. Reducer bearings shall be the taper roller or ball type and provide a minimum 25,000 hour average life. All seals shall be of the spring loaded type, made of viton (input seals) and nitrile rubber (output seals.) Reducer gears and bearings shall be splash lubricated using an extended life synthetic hydrocarbon lubricant containing additives that enhance oxidation stability and provides protection against rust. The lubricant allows a wide operating temperature range of -10 F to 165 F ambient and meets USDA class H-2 standards. C-face reducers shall be of the cross split hollow bore and clamp collar design so as to eliminate backlash at the motor connection, and eliminate, or minimize, fretting corrosion between the motor shaft and the reducer stub shaft. Refer to the following procedure for selection assistance. MOTO DRIVE ULTIMA How To Order Step 1: For applications with one start/hr. or less and nonpulsating load (starting factor = 1.0) skip Steps 2 and 3 and proceed to Step 4. For applications with more than one start/hr. proceed to Step 2. Step 2: Determine inertia ratio. Inertia Ratio = Driven Inertia Driving Inertia Where: Driving Inertia is defined as the motor inertia. This value must be provided by the motor manufacturer. On Gearmotors, driving inertia data is available from your MASTER Sales Engineer or Application Engineering. Driven Inertia is defined as the load inertia referred to the motor speed. The load inertia must be provided by the driven machine manufacturer. For assistance contact application engineering or see the following formulas. Rotating Driven Inertia = Load Inertia x Linear Driven Inertia = W x Where: ( ) 2 V 6.28 N W = Weight (Lbs.) V = Linear Velocity (Ft./Min.) N = Motor RPM ( ) 2 Load RPM Motor RPM If these values are unobtainable proceed to Step 3. NOTE: Gearbox Inertias, not addressed above, are typically negligible. If required, inertia values for the unit may be obtained from your MASTER Sales Engineer or Application Engineering. PULLEYS -4
5 HOW TO ORDER Step 3: With inertia ratio determined, use Chart 1 to select starting factor. Chart 1: Starting Factors Unknown Starts Inertia Ratios Inertia HR > > > Ratio If starting frequency is greater than 25 starts/hr., contact application engineering at Step 4: Determine Driven Machine Factor from Chart 2 below. Chart 2: Driven Machine Factor Driven Load Classification Duration of Medium Heavy Prime Mover Service Per Day Uniform Shock Shock Intermittent 2 hrs Electric Up to 10 hours Motor hours Multi-cylinder Internal Intermittent 2 hrs Combustion Up to 10 hours Engine hours Single Cylinder Internal Intermittent 2 hrs Combustion Up to 10 hours Engine hours Step 5: Determine service factor. Service Factor = Starting Factor x Driven Machine Factor Step 6: Reducer Selection- Using the service factor obtained in Step 5, calculate the equivalent HP by multiplying the demand HP to be transmitted by the service factor. Equivalent HP = Demand HP x Service Factor Nominal Efficiency Where: Single Reduction Nominal Eff. = 0.98 Reduction Nominal Eff. = 0.96 Reduction Nominal Eff. = 0.94 Gearmotor Selection - Determine class of service from Chart 3. For service factors greater than 2.0, a MASTER reducer must be selected. Step 7: Reducer Selection - From rating tables pages D1-7 through D1-48, make reducer selection based on input RPM, ratio, and equivalent HP. Gearmotor Selection - Go to the desired HP Gearmotor Selection Table for the appropriate class of service and output RPM (or reduction ratio). This will indicate gearcase size, motor frame size, output torque, and output OHL capacity. Step 8: Check overhung loads by using the following formula: OHL = Chart 3: Class of Service Service Factor 126,000 x HP x Fc x Lf PD x RPM Where: OHL = Overhung Load (lbs.) HP = Demand Horsepower Fc = Load Connection Factor Chain Drive: Fc = 1.00 Synchronous Belt Drive Fc = 1.10 Spur or Helical Gear Fc = 1.25 V-Belt Drive Fc = 1.50 Flat Belt Drive Fc = 2.50 Lf = Load Location Factor. For Lf of low speed shaft see page D1-85. PD = Pitch Diameter (inches) Class of Service I > II > III RPM = Revolutions per Minute (output) To minimize overhung load and increase bearing life, load centerline should be located as close to the shaft shoulder as possible. For applications where OHL exceeds catalogued values contact Application Engineering or use the reducer selection tables to select the next largest size gearcase. MASTER XL MASTER COMBOGEAR MOTO DRIVE ULTIMA PULLEYS -5
6 NOMENCLATURE Reducers And Gearmotors MOTOR HP-IF G CONSTRUCTION MOTOR HP-IF M CONSTRUCTION BLANK-IF R CONSTRUCTION OR IF NO MOTOR ATTACHED Nomenclature XXX - XXX - X X X X - X - XXX.XX - XXX MOTOR FRAME-IF G CONSTRUCTION MOTOR FRAME-IF M CONSTRUCTION BLANK-IF R CONSTRUCTION MASTER XL STAGES OF REDUCTION S = D = T = TRIPLE GEARCASE CONSTRUCTION G = INTEGRAL GEARMOTOR M = C-FACE MOTORIZED R = SEPARATE REDUCER GEARCASE SIZE-1 THROUGH 8 MASTER COMBOGEAR FOOTMOUNT (A) OR FLANGE MOUNT (F) CLASS OF SERVICE 1, 2 OR 3-IF G CONSTRUCTION BLANK-IF M CONSTRUCTION BLANK-IF R CONSTRUCTION THROUGH MOUNTING POSITION - SEE PAGE -77 & 78 FOR GEARMOTORS -79 & 80 FOR REDUCERS -81 FOR SEPARATES MOTO DRIVE NOMENCLATURE EXAMPLES MOTOR HP - 15 HP MOTOR FRAME TY REDUCTION TY - D G 5 A A1 REDUCTION SEPARATE REDUCER CONSTRUCTION SIZE 3 S R 3 A C2 INTEGRAL GEARMOTOR CONSTRUCTION FOOT MOUNT SIZE :1 NOMINAL FOOT MOUNT C2 MOUNTING POSITION ULTIMA CLASS 2 SERVICE 11.4:1 NOMINAL A1 MOUNTING POSITION MOTOR FRAME - 184TC TRIPLE REDUCTION 184TC - T M 6 F AF5 C-FACE REDUCER CONSTRUCTION SIZE 6 FLANGE MOUNT 86.5:1 NOMINAL AF5 MOUNTING POSITION PULLEYS -6
7 MASTER Selection SELECTION 1/3 HP Gearmotors CLASS I (See selection procedure, page -4) TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.lb.) NUMBER FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP NOTE: All Motors Used On Integral Gearmotors Are Premium Efficient, TEFC Continuous Duty, 40º C Ambient, Design B, Class F Insulation, 1.15 Service Factor, 1750 RPM, /460 Volts CLASS III TRIPLE CLASS II Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.lb.) NUMBER FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP TRIPLE FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.lb.) NUMBER FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP (1) At one shaft diameter from the shaft shoulder. Measured in lbs. NOTE: 3 ft. lb. brake available. Brake coils are single phase, 60 Hz, 230/460 volts AC. NOTE: Integral Gearmotors Are Not Available In Case s 1 & 2 COMBOGEAR MASTER XL MOTO DRIVE ULTIMA PULLEYS -7
8 SELECTION MASTER MASTER XL COMBOGEAR 1/2 HP Gearmotors CLASS I (See selection procedure, page -4) TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.lb.) NUMBER FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP CLASS II TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in. lb.) NUMBER FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P 2200 AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP CLASS III MOTO DRIVE NOTE: All Motors Used On Integral Gearmotors Are Premium Efficient, TEFC Continuous Duty, 40º C Ambient, Design B, Class F Insulation, 1.15 Service Factor, 1750 RPM, /460 Volts ULTIMA PULLEYS Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.lb.) NUMBER FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP NOTE: Integral Gearmotors Are Not Available In Case s 1 & 2 TRIPLE FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP (1) At one shaft diameter from the shaft shoulder. Measured in lbs. NOTE: 3 ft. lb. brake available. Brake coils are single phase, 60 Hz, 230/460 volts AC. -8
9 MASTER 3/4 HP Gearmotors CLASS I TRIPLE (See selection procedure, page -4) Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP NOTE: All Motors Used On Integral Gearmotors Are Premium Efficient, TEFC Continuous Duty, 40º C Ambient, Design B, Class F Insulation, 1.15 Service Factor, 1750 RPM, /460 Volts CLASS III TRIPLE CLASS II TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP SELECTION Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP (1) At one shaft diameter from the shaft shoulder. Measured in lbs. NOTE: 3 ft. lb. brake available. Brake coils are single phase, 60 Hz, 230/460 volts AC. NOTE: Integral Gearmotors Are Not Available In Case s 1 & 2 COMBOGEAR MASTER XL MOTO DRIVE ULTIMA PULLEYS -9
10 SELECTION MASTER MASTER XL COMBOGEAR 1 HP Gearmotors CLASS I (See selection procedure, page -4) TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP CLASS II TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP CLASS III MOTO DRIVE ULTIMA NOTE: All Motors Used On Integral Gearmotors Are Premium Efficient, TEFC Continuous Duty, 40º C Ambient, Design B, Class F Insulation, 1.15 Service Factor, 1750 RPM, /460 Volts PULLEYS TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP FB56P AP NOTE: Integral Gearmotors Are Not Available In Case s 1 & 2 (1) At one shaft diameter from the shaft shoulder. Measured in lbs. NOTE: 3 ft. lb. brake available. Brake coils are single phase, 60 Hz, 230/460 volts AC. -10
11 MASTER SELECTION 1-1/2 HP Gearmotors CLASS I (See selection procedure, page -4) TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP NOTE: All Motors Used On Integral Gearmotors Are Premium Efficient, TEFC Continuous Duty, 40º C Ambient, Design B, Class F Insulation, 1.15 Service Factor, 1750 RPM, /460 Volts CLASS III TRIPLE CLASS II Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER TRIPLE FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP FB143P AP (1) At one shaft diameter from the shaft shoulder. Measured in lbs. NOTE: 6 ft. lb. brake available. Brake coils are single phase, 60 Hz, 230/460 volts AC. NOTE: Integral Gearmotors Are Not Available In Case s 1 & 2 COMBOGEAR MASTER XL MOTO DRIVE ULTIMA PULLEYS -11
12 SELECTION MASTER MASTER XL COMBOGEAR 2 HP Gearmotors CLASS I (See selection procedure, page -4) TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP CLASS II TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP MOTO DRIVE ULTIMA NOTE: All Motors Used On Integral Gearmotors Are Premium Efficient, TEFC Continuous Duty, 40º C Ambient, Design B, Class F Insulation, 1.15 Service Factor, 1750 RPM, /460 Volts CLASS III PULLEYS TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP FC145P AP (1) At one shaft diameter from the shaft shoulder. Measured in lbs. NOTE: 6 ft. lb. brake available. Brake coils are single phase, 60 Hz, 230/460 volts AC. NOTE: Integral Gearmotors Are Not Available In Case s 1 & 2-12
13 MASTER SELECTION 3 HP Gearmotors CLASS I (See selection procedure, page -4) TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY ,767 AQ TY ,160 AQ NOTE: All Motors Used On Integral Gearmotors Are Premium Efficient, TEFC Continuous Duty, 40º C Ambient, Design B, Class F Insulation, 1.15 Service Factor, 1750 RPM, /460 Volts CLASS lll TRIPLE CLASS II Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER TRIPLE TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY ,767 AQ TY ,160 AQ (1) At one shaft diameter from the shaft shoulder. Measured in lbs. Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY ,767 AQ TY ,160 AQ NOTE: 10 ft. lb. brake available. Brake coils are single phase, 60 Hz, 230/460 volts AC. NOTE: Integral Gearmotors Are Not Available In Case s 1 & 2 COMBOGEAR MASTER XL MOTO DRIVE ULTIMA PULLEYS -13
14 SELECTION MASTER MASTER XL COMBOGEAR 5 HP Gearmotors CLASS I (See selection procedure, page -4) TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY ,870 AQ TY ,844 AQ TY ,805 AQ TY ,945 AQ TY ,933 AQ CLASS II TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY ,870 AQ TY ,844 AQ TY ,805 AQ TY ,945 AQ TY ,933 AQ CLASS III MOTO DRIVE ULTIMA NOTE: All Motors Used On Integral Gearmotors Are Premium Efficient, TEFC Continuous Duty, 40º C Ambient, Design B, Class F Insulation, 1.15 Service Factor, 1750 RPM, /460 Volts TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY ,870 AQ TY ,844 AQ TY ,805 AQ TY ,945 AQ TY ,933 AQ NOTE: Integral Gearmotors Are Not Available In Case s 1 & 2 (1) At one shaft diameter from the shaft shoulder. Measured in lbs. PULLEYS NOTE: 15 ft. lb. brake available. Brake coils are single phase, 60 Hz, 230/460 volts AC. -14
15 MASTER SELECTION 7-1/2 HP Gearmotors CLASS I (See selection procedure, page -4) TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY ,004 AQ TY ,805 AQ TY ,766 AQ TY ,208 AQ TY ,918 AQ TY ,900 AQ NOTE: All Motors Used On Integral Gearmotors Are Premium Efficient, TEFC Continuous Duty, 40º C Ambient, Design B, Class F Insulation, 1.15 Service Factor, 1750 RPM, /460 Volts CLASS III TRIPLE CLASS II Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER TRIPLE TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY ,870 AQ TY ,004 AQ TY ,805 AQ TY ,766 AQ TY 12,000 22,208 AQ TY 12,000 26,918 AQ TY 12,000 32,900 AQ (1) At one shaft diameter from the shaft shoulder. Measured in lbs. Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY ,870 AQ TY ,004 AQ TY ,805 AQ TY ,766 AQ TY ,208 AQ TY ,918 AQ TY ,900 AQ COMBOGEAR MASTER XL MOTO DRIVE ULTIMA PULLEYS -15
16 SELECTION MASTER MASTER XL COMBOGEAR 10 HP Gearmotors CLASS I (See selection procedure, page -4) TRIPLE CLASS II Case Motor Torque MODEL Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER RPM Ratio Frame OHL (1) (in.-lb.) NUMBER TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP PULLEYS MOTO DRIVE ULTIMA TY ,575 AP TY ,575 AP TY ,160 AP TY ,160 AP TY ,005 AP TY ,688 AP TY ,740 AP TY ,740 AP TY ,688 AP TY ,610 AP TY ,610 AP TY ,891 AP TY 12,000 35,891 AP TY ,867 AP TY 12,000 43,867 AP TRIPLE NOTE: All Motors Used On Integral Gearmotors Are Premium Efficient, TEFC Continuous Duty, 40º C Ambient, Design B, Class F Insulation, 1.15 Service Factor, 1750 RPM, /460 Volts CLASS III TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY ,575 AP TY ,160 AP TY ,005 AP (1) At one shaft diameter from the shaft shoulder. Measured in lbs TY ,740 AP TY 12,000 23,688 AP TY 12,000 29,610 AP TY 12,000 35,891 AP TY 12,000 43,867 AP
17 MASTER 15 HP Gearmotors CLASS I (See selection procedure, page -4) TPL SELECTION Case Motor Torque MODEL Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER RPM Ratio Frame OHL (1) (in.-lb.) NUMBER TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY ,800 AQ TY ,800 AQ TY ,341 AQ TY ,341 AQ TY ,863 AQ NOTE: All Motors Used On Integral Gearmotors Are Premium Efficient, TEFC Continuous Duty, 40º C Ambient, Design B, Class F Insulation, 1.15 Service Factor, 1750 RPM, /460 Volts CLASS III CLASS II Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER TRIPLE TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY AQ TY ,800 AP TY ,341 AP (1) At one 56 shaft diameter 31.4 from 7 the shaft 215TYshoulder. 5750Measured 15,863 in AP lbs TY 12,000 19,740 AP TY 12,000 24,008 AP TY 12,000 29,610 AP TY 12,000 35,532 AP TY 12,000 44,415 AP TRIPLE TY ,863 AP TY ,740 AP TY ,008 AP TY ,610 AP TY 12,000 35,532 AP TY 12,000 44,415 AP TY 12,000 53,836 AP COMBOGEAR MASTER XL MOTO DRIVE ULTIMA PULLEYS -17
18 SELECTION MASTER MASTER XL COMBOGEAR 20 HP Gearmotors CLASS I (See selection procedure, page -4) TRIPLE CLASS II Case Motor Torque MODEL Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER RPM Ratio Frame OHL (1) (in.-lb.) NUMBER TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY ,677 AP TY ,677 AP TY ,096 AP TY ,096 AP TY ,400 AP TY ,400 AP TY ,788 AP TY ,788 AP TY ,150 AP TY ,150 AP TY ,320 AP TY 12,000 26,320 AP TY ,011 AP TY 12,000 32,011 AP TY ,480 AP TY 12,000 39,480 AP TY 12,000 47,376 AP TY 12,000 47,376 AP TY 12,000 59,220 AP TY 12,000 59,220 AP TY 12,000 71,782 AP TY 12,000 87,733 AP MOTO DRIVE ULTIMA PULLEYS TRIPLE CLASS III NOTE: All Motors Used On Integral Gearmotors Are Premium Efficient, TEFC Continuous Duty, 40º C Ambient, Design B, Class F Insulation, 1.15 Service Factor, 1750 RPM, /460 Volts TRIPLE Case Motor Torque MODEL RPM Ratio Frame OHL (1) (in.-lb.) NUMBER TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY AP TY ,677 AP TY ,096 AP TY ,400 AP TY ,788 AP TY 11,500 21,150 AP TY 11,500 26,320 AP TY 11,200 32,011 AP TY 10,500 39,480 AP (1) At one shaft diameter from the shaft shoulder. Measured in lbs. -18
2009 CUSTOM CLASSICS CATALOG
2009 CUSTOM CLASSICS CATALOG CONTENTS DODGE Custom Classics Introduction D1-1 - D1-4 Introduction DODGE APG D2-1 - D2-88 MASTER XL D3-1 - D3-96 DODGE Combination TIGEAR D4-1 - D4-87 REEVES MOTODRIVE D5-1
More informationFEATURES / BENEFITS... 2 SPECIFICATION / HOW TO ORDER... 4 NOMENCLATURE... 11
CONTENTS QUANTIS RHB FEATURES / BENEFITS.................................... 2 SPECIFICATION / HOW TO ORDER........................... 4 NOMENCLATURE......................................... 11 GEARMOTORS
More informationMASTER SPECIFICATION XL RIGHT ANGLE GEARING XL PARALLEL GEARING
SPECIFICATION XL RIGHT ANGLE GEARING The speed reducer shall be suitable for integral gearmotor construction, readily adaptable for C-face mounting, in either integrally cast feet, output flange, multi-mount,
More informationMASTER SPECIFICATION XL RIGHT ANGLE GEARING XL PARALLEL GEARING
SPECIFICATION XL RIGHT ANGLE GEARING The speed reducer shall be suitable for integral gearmotor construction, readily adaptable for C-face mounting, in either integrally cast feet, output flange, multi-mount,
More informationCONTENTS ComboGear Updated 5/17/2016
MASTER CONTENTS Updated 5/17/2016 Contents Features / Benefits...CG-2 Specification...CG-4 How To Order...CG-4 Nomenclature...CG-4 Easy Selection...CG-5 Selection Using Rating Tables...CG-12 Dimensions...CG-23
More informationCONTENTS. Adaptable TIGEAR Right Angle Speed Reducers. Specification... How To Order...
CONTENTS Right Angle Speed Reducers Features/Benefits... G4--2 Specification... How To Order... G4--4 G4--5 Nomenclature Easy Selection...... G4--5 G4--6 Selection/Dimensions... Mounting Positions... G4--10
More informationXL Right Angle and Parallel Reducers and Gearmotors
CONTENTS XL Right Angle and Parallel Reducers and Gearmotors Contents Updated 11-7-2016 Features / Benefits XL Right Angle Reducers and Gearmotors...XL-2 XL Parallel Reducers and Gearmotors...XL-3 Specification
More informationProduct Brochure. Quantis gearmotors & reducers
Product Brochure Quantis gearmotors & reducers We provide motors, generators and mechanical power transmission products, services and expertise to save energy and improve customers processes over the total
More informationHighly Efficient, Grease Lubricated, Compact Design. Hypoid gearing delivers efficiencies up to 85% and smooth, quiet operation
Highly Efficient, Grease Lubricated, Compact Design Grease lubricated design is maintenance free, requires no oil changes and is up to 85% efficient across all ratios Hypoid gearing delivers efficiencies
More informationUniversal Series Style Reference Guide
STF Universal Series Style Reference Guide SVF Accessories Dimensions P. 161 Dimensions P. 162 ST SB SV Ratio Multipliers In-Line Helical (ILH) Universal Series Universal Series STL Dimensions P. 163 SVL
More informationC o n t e n t s. SmartBox Overview...2
C o n t e n t s SmartBox Overview.......................2 Catalog Notes............................4 H Series SmartBox.....................7 Versions...............................8 Nomenclature.........................9
More informationHub City Spartan Aluminum Worm Gear Drives
Spartan Aluminum Worm Gear Features C-2 Selection Instructions C-3 Descriptions C-4 Single Reduction Ratings C-5 Single Reduction Dimensions C-6 to C-7 Double Reduction Worm-Worm Ratings C-8 Double Reduction
More informationHub City Spartan Aluminum Worm Gear Drives
Spartan Aluminum Worm Gear Features C-2 Selection Instructions C-3 Descriptions C-4 Single Reduction Ratings C-5 Single Reduction Dimensions C-6 to C-7 Double Reduction Worm-Worm Ratings C-8 Double Reduction
More informationTIGEAR 2 Sp e e d Re d u c e r s
TIGEAR 2 REDUCERS TIGEAR 2 Sp e e d Re d u c e r s Eng i n e e r i n g Th a t Ra i s e s Th e Ba r Never before have greater advancements been made in speed reducer technology. TIGEAR-2 is the only complete
More informationSpeed Reducers and Gearmotors
ofc BEVEL BUDDYBOX Speed Reducers and earmotors CATALO 13.605.50.001 Bevel Buddybox Rugged Spiral Bevel Output Modular Cyclo Input Compact Size Two-Year Warranty Eccentric Cam and Roller Assembly Housing
More informationREEVES MOTO DRIVE BASIC PRICING
REEVES BASIC PRICING PARALLEL GEARING LIST PRICE X G50 HP SIZE LIST HP SIZE LIST HP SIZE LIST 050 $2,451 100 $4,560 300 $12,988 051 3,081 111 5,250 331 15,751 1/4 052 3,357 121 6,079 332 18,515 053 3,648
More information2000HG SELECTION AND PRICING
2000HG SELECTION AND PRICING Sterling Electric offers a full range of Helical Gear Products to meet the demanding applications found in today s industry. Our standard cast iron product design lends itself
More informationSHAFT MOUNT & SCREW CONVEYOR REDUCERS. Cleveland
SHAFT MOUNT & SCREW CONVEYOR REDUCERS Cleveland SHAFT MOUNT & SCREW CONVEYOR REDUCER FEATURES Shaft Mount reducers available in sizes 2 Screw Conveyor reducers available in sizes 2 6 Suitable for AGMA
More informationHub City TM Worm Gear Drives
Worm Gear Features -2 to -6 Factory Options -7 Rating Parameters -8 Pre-Selection Information -9 How To Select and Order Standard Models -10 Single Reduction -11 to -56 Single Reduction Model Index -12
More informationSHAFT MOUNT REDUCERS. For Additional Models of Shaft Mount Reducers See Sections F & J G-1
SHAFT MOUNT REDUCERS PowerTorque Features and Description... -2 Nomenclature... -4 Selection Instructions... -5 Selection By Horsepower... -7 Mechanical Ratings... -12 Dimensions... -14 Accessories...
More informationCHILL CAST BRONZE WORM GEAR, HARDENED STEEL WORM
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 GF5032BG F-932-50-B7-G Baldor Electric CO. Catalog Number Manufacturer Description Weight per unit Product Category Features
More informationD-90 Type DE Double Enveloping Worm Gear Speed Reducers.
T D-90 Type DE Double Enveloping Worm Gear Speed Reducers www.winsmith.com WINSMITH D-90 TYPE DE S NEW DOUBLE ENVELOPING WORM GEAR REDUCERS HIGH POWER HIGH EFFICIENCY COMPACT DESIGN WORM SHAFT Heat-treated
More informationmodel HP Servo AccuDrive Family of Products
model 09090.01 AccuDrive Family of Products Series W Model RG Series S Series P Series E/LE ACCUDRIVE PRECISION PRODUCTS Now you can get design flexibility and lasting performance from our complete family
More informationCOMPACT HELICAL PARALLEL DRIVES
HB ITY POWRATIO 2 OMPAT HLIAL PARALLL DRIVS OMPAT HLIAL PARALLL DRIVS J ompact Helical Parallel Product eatures...j2 to J3 Selection Procedure...J4 Descriptions...J6 Mounting Positions...J7 Model Selection
More informationCYCLO HBB. ofc. Gearmotor. Premium Efficient Motor Edition. Catalog
ofc CYCLO HBB HELICAL BUDDYBOX Gearmotor Premium Efficient Motor Edition Catalog 07.401.90.001 Helical Buddybox EP.NA Motors Enhanced Performance (EP.NA) integral motors represent exceptional value to
More informationSERIES 12 SUB-FHP RIGHT ANGLE DC GEARMOTORS
SERIES 12 SUB-FHP RIGHT ANGLE DC GEARMOTORS SERIES 12 SUB-FHP Electrical Specifications: Both SCR (90 volt) and Low Voltage (12 volt) right angle gearmotors. the 90 volt motors are performance matched
More informationQUICK REFERENCE Stock Sub-FHP Gearmotors
Parallel Shaft PZ Series QUICK REFERENCE Stock Sub-FHP P240 & P300 Series AC Single & Three Phase Single Phase 115V 12-100 In-Lbs Page 102 Single Phase 115/230V 43-391 In-Lbs Page 103 DC SCR & Low Voltage
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationSlide-Rite & Slide-Rite CR Gearbox
Gearboxes Gearbox and CR Gearbox Pages 2 through 7 Float-A-Shaft (FAS) Gearbox Pages 8 through 24 Visit www.tolomatic.com for the latest updates, CAD files and ordering. GEARBOXES www.tolomatic.com 1 GEARBOXES
More informationGROVE GEAR IRONMAN HIGH EFFICIENCY HELICAL-INLINE GEAR REDUCERS & GEAR+MOTOR SOLUTIONS
GROVE GEAR IRONMAN HIGH EFFICIENCY HELICAL-INLINE GEAR REDUCERS & GEAR+MOTOR SOLUTIONS R SERIES FEATURES AND BENEFITS ALL GEARING is HARDENED AND GROUND (AGMA class 10 or better) for enhanced efficiency
More informationSPARTAN ALUMINUM WORM GEAR DRIVES. For Cast Iron Worm Gear Drives See Section B. New Ratings and Ratios! See Pages C-7, C-10, C-13 C-1
SPARTAN ALUMINUM WORM GEAR DRIVES Spartan Aluminum Worm Gear Features......................................-2 Selection Instructions.........................................................-3 Mounting
More informationFEATURES/BENEFITS. Type E-Xtra DODGE Type E One Bearing, One Seal For Dusty or Damp Environments
Type E-Xtra DODGE Type E One Bearing, One Seal For Dusty or Damp Environments The Original DODGE Type E Bearing, Only Better New Dodge manufactured bearings increase load ratings 13-14% depending on size
More informationPower Transmission solutions for every
Power Transmission solutions for every IRONMAN GR Series Stainless Steel ironman High Efficiency Gear Reducers washguard Recognized throughout the world as a leader in industrial-duty gear reducers, GEAR+MOTORS
More informationIronHorse Cast-Iron Worm Gearboxes 2 2 Gearbox Selection Factors 2 2. Service Factors and K Factors 2 2
Cast-Iron Worm Gearboxes Chapter 2 Table of Contents IronHorse Cast-Iron Worm Gearboxes 2 2 Gearbox Selection Factors 2 2 Service Factors and K Factors 2 2 IronHorse Cast-Iron Worm Gearbox Specifications
More informationViking In-Line Helical Gear Reducers
Page 615.1 Gear Ratio Range: (varies by reducer size) Output Speeds (with 1750 rpm input) Reducer Horsepower Range: From 2.63:1 to 38.0:1 (Varies by reducer size) 46 665 rpm.5 HP (.37 kw) to 350 HP (261
More informationGrove Gear IRONMAN High Effiiciency Helical - Bevel Gear Reducers
Grove Gear IRONMAN High Effiiciency Helical - Bevel K Series Features and Benefits standard double lip Seals provide extra protection against entry of contaminants or loss of lubrication. Bearing spans
More informationDURST. Over 3 hr. per day and incl.
pump drive selection guide Max. Max Input Input Flywheel Ratio Pump Pump Centre Approx. HP* Torque Style# Housing Inc. OR Dec. Adaptors Distance Weight Model (kw) Lb.ft (nm) Size kg 1PD06 495 1040 P,S
More informationViking Helical Gear Reducers
Page 610.1 Issue J Gear Ratio Range: (varies by reducer size) 1.87:1 to 7.95:1 Output Speeds (with 1750 rpm input) Reducer Horsepower Range: 950 to 220 rpm 1.4 HP (.1 kw) to 49.8 HP (37.2 kw) THREE SIZES
More informationFeatures/Benefits...G2-3. Specifications...G2-7. Nomenclature...G2-8. Easy Selection...G2-9
CONTENTS Features/Benefits...G2-3 Gearing Reference Specifications...G2-7 Nomenclature...G2-8 Easy Selection...G2-9 Selection Selection...G2-12 pplication and Class Numbers...G2-14 Class I Selections...G2-15
More informationQUICK REFERENCE Stock Sub-FHP Gearmotors
QUICK REFERENCE Stock Sub-FHP AC Single & Three Phase DC SCR & Low Voltage Parallel Shaft PZ Series Single Phase 115V 12-100 In-Lbs Page 166 DC SCR 90 & 180V 10-100 In-Lbs 36-100 In-Lbs torque Page 156
More informationGrove Gear Ironman High Efficiency Helical - Inline Gear Reducers and GEAR+MOTOR Solutions
BRAVO Grove Gear Ironman and GEAR+MOTOR Solutions R Series Features and Benefits ALL GEARING is HARDENED AND GROUND (AGMA class 10 or better) for enhanced efficiency and noise reduction. Double reduction
More informationF Series: OFFSET Versatile Outputs
Features 4.3:1 to 552:1 ratios (higher ratios available. Contact STOBER.) Quiet running (
More informationPrecision on the highest level
6 - line Precision on the highest level The series is the standard Neugart inline high precision planetary gearhead for applications with very high precision requirements. Whether high torque density,
More informationQUICK REFERENCE Stock Sub-FHP Gearmotors
QUICK REFERENCE Stock Sub-FHP Right-Angle Worm Type 10 & 13 Series AC Single & Three Phase Single Phase 115/230V 14-113 In-Lbs Page 155 DC SCR & Low Voltage DC SCR 90 & 180V 5-135 In-Lbs Low Voltage (12V)
More informationGROVE GEAR IRONMAN HIGH EFFICIENCY HELICAL-BEVEL GEAR REDUCERS K SERIES FEATURES AND BENEFITS
GROVE GEAR IRONMAN HIGH EFFICIENCY HELICAL-BEVEL GEAR REDUCERS K SERIES FEATURES AND BENEFITS standard double lip Seals provide extra protection against entry of contaminants or loss of lubrication. Bearing
More informationtechnology made in Italy
technology made in Italy GB RD * * VS made in China Technology Made in Italy Since 1955 Varvel has been making speed reducers and variators for light industry applications. Reliable partner in power transmission
More informationCA1600 Effective Date: August, 2004
Gear Products CA1600 Effective Date: August, 2004 Why Baldor? For over 80 years, Baldor has strived to provide customers with the best value and reliability in industrial products. To be considered by
More information+1 (800) Gear Reducers STOCK PRODUCTS CATALOG. Industry. DRIVING & Controlling WorldWideElectric.net
+1 (800) 808-2131 2017-2018 Gear Reducers STOCK PRODUCTS CATALOG ndustry DRVNG & Controlling WorldWideElectric.net VST OUR WEBSTE www.worldwideelectric.net Table Of Contents SHAFT MOUNT REDUCERS PAGE MULTPLER
More informationWASHGUARD Gear Reducers & GEAR+MOTOR
Single Reduction WASHGUARD Gear Reducers & GEAR+MOTOR With gear reducers in epoxy painted cast iron, polished aluminum and stainless steel, Grove Gear offers a solution for any washdown application. GOOD
More informationAll Products Catalog We Provide Solutions
All Products Catalog We Provide Solutions A Regal Brand We Listen Define your critical application and business needs, and we ll help you determine the right path to success. and Provide Solutions. We
More informationViking s helical gear reducers are available in three basic sizes, each size offering several gear ratios.
PARTS & ACCESSORIES: SIZES A, B & C Section 610 Page 610.1 Issue L Gear Ratio Range: (varies by reducer size) 1.87:1 to 7.95:1 Output Speeds (with 1750 rpm input) 950 to 220 rpm Reducer Horsepower Range:
More informationMECHANICAL POWER TRANSMISSION. Quantis gearmotors & reducers
MECHANICAL POWER TRANSMISSION Quantis gearmotors & reducers 2 DODGE MECHANICAL QUANTIS GEARMOTOR Dodge Quantis We provide motors and mechanical power transmission products, services and expertise to save
More informationSUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS
SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS 12-100 In-Lbs Single phase gearmotors, totally enclosed for continuous duty, general purpose applications. Permanent TEFC split capacitor designs are rated
More informationCONTENTS. DODGE QUANTIS Gold Gearmotors
CONTENTS DODGE QUANTIS Gold Gearmotors QUANTIS Features / Benefits........................................................... QG-3 How to Order / Nomenclature...................................................
More informationDodge Torque-Arm II The Legacy Continues
Torque-Arm II Dodge Torque-Arm II The Legacy Continues The Dodge Torque-Arm II surpasses all other reducers on the market because of its industry proven design and patented features. This powerful line
More informationThe Available Solution CYCLO DRIVE. Gearmotors & Speed Reducers. Series
The Available Solution CYCLO DRIVE Gearmotors & Speed Reducers 6000 Series WHAT DO YOU THINK OF THIS? THESE ARE THE ADVANTAGES OF THE NEWEST CYCLO, 6000 SERIES: More frame sizes, gear ratios and motor
More informationALUMINUM RATIO MULTIPLIERS
More Than Just a Motor Company ALUMINUM RATIO MULTIPLIERS Bulletin 7052 FEATURES 7 5 1 2 3 9 6 8 4 10 1 2 3 4 Lightweight Aluminum Construction is up to 75% lighter and 35% smaller than cast iron reducers
More informationGearboxes. Gearboxes
254 Brammer provide a comprehensive nationwide industrial repair service. Strategically located Gearbox Centres around the UK Complete service from emergency repair or gearbox replacement to scheduled
More informationFor new perspectives. WPLE - line WPLE
54 - line For new perspectives The is the logical refinement of our PLE series. This bevel gearbox series was designed especially for space-saving installation in a right-angle position of the motor/gearbox
More informationDC MOTORS NEMA FRAME SCR RATED
NEMA FRAME SCR RATED NEMA FRAME MOTORS SCR RATED High voltage permanent magnet DC motors are typically used with an SCR (thyristor) controller in applications requiring adjustable speed and constant torque
More information180VC WITH B5 FLANGE / M ,6 0, / M l 5,0 0,7 192 / M ,0 0,9 223
METRIC (IEC) FRAME THYRISTOR RATED DC METRIC (IEC) FRAME MOTORS IP54 These metric dimensioned motors are built to IEC 34-1 electrical and mechanical standards. The IEC 63 and smaller frames are stocked
More informationAF / AFR Series. AFR Series
AF / AFR Series haracteristic Highlights Equipped with solid uncaged needle roller bearings, provides maximum contact points to increase stiffness and generates high output torque. True helical gear design
More information2000RA WORM GEAR REDUCER
2000RA WORM GEAR REDUCER INSTALLATION AND MAINTENANCE MANUAL February 22, 2010 Indianapolis, Indiana (800) 866-7973 Hamilton, Ontario (800) 809-0330 e-mail: sales@sterlingelectric.com www.sterlingelectric.com
More informationALL PRODUCTS CATALOG
ALL PRODUCTS CATALOG W E P R OV I D E S O L U T I O N S WE LISTEN Define your critical application and business needs, and we ll help you determine the right path to success. AND PROVIDE SOLUTIONS. We
More informationSeries 2000 Inline Helical Gear Drives & Gear Motors
A L T R A I N D U S T R I A L M O T I O N Series 2000 Inline Helical Gear Drives & Gear Motors INTRODUCING NEW GEARING SOLUTIONS FROM BOSTON GEAR This well recognized Altra Industrial Motion brand has
More informationProduct Brochure Power and productivity go hand in hand Mechanical power transmission products
Product Brochure Power and productivity go hand in hand Mechanical power transmission products With Dodge mechanical power transmission products, you get more than just power. You get the widest range
More informationFIXED MOUNT MIXERS FRG, FRH, FRG-C & FRH-C SERIES
FIXED MOUNT MIXERS FRG, FRH, FRG-C & FRH-C SERIES modular design for easy adaptation between sealed, closed, and open tanks. quick shipping usually within 2 days based on configuration selected. durable
More informationGearmotors Parallel Shaft - PZ Series - DC
90 & 180 - TENV - PZ Series Price Model Frame P X XL XH 4 40 1 40 M1115002.00 496 985.620 PZ5-30A 450 90 0.46 155 3.00 3.25 9.28 7.72 S, US 40 1 40 M1125046.00 496 985.623 PZ5-30A 450 180 0.19 155 3.00
More informationPerformance: Spiral Bevel Series
Performance: Spiral Bevel Series GAM can. If you don t see exactly what you need, let us know. We can modify the VC Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More information4 Project planning for drives
Error! B ookmark not d efined.error! Bookmark not defin ed. Additional publications.1 Additional publications For more details on the subject of project, visit the documentation section of the SEW-EURODRIVE
More informationAC Motor Brakes. General Information. Features. Add-On Brakes. Spring Applied Power-Off Operation. Motor Brake Coil Current. Mounting.
Spring Applied Power-Off Operation Power-Off Operation Inertia Dynamics AC-style, spring applied motor brakes are designed to decelerate or park inertial loads when the voltage is turned off, either intentionally
More informationSUB-FHP DC GEARMOTORS PARALLEL SHAFT GEARMOTORS
10-100 In-Lbs Torque 36-100 In-Lbs Torque Electrical Specifications: SCR Rated Totally enclosed, permanent magnet DC gearmotors, performance matched for continuous duty service over a 60:1 speed range.
More informationSeries J Shaft Mounted Gearbox
Series J Shaft Mounted Gearbox Technical Up to - 600kW / 57,000 Nm Industrial Gearbox CJ-2.00GBA1211 PRODUCTS IN THE RANGE Serving an entire spectrum of mechanical drive applications from food, energy,
More informationHOW TO ORDER SPECIAL FINISHES
HOW TO ORDER There are two ways to specify DODGE Bearings. Most of the product offerings have part numbers with listings shown throughout this catalog. Use of part numbers ensures accurate order processing.
More informationHow To Use Maximum Rating Tables
How To Use for Double Reduction Gear Reducers are shown on pages 193-196. 1 Locate the Input RPM and Output RPM columns in the charts beginning on page 204. Scroll down the Input RPM column to locate a
More informationSPECIFICATION HOW TO ORDER QUANTIS QUANTIS
The DODGE speed reducer is suitable for c-face, separate, or integral gearmotor construction in either foot or output flange mountings, and available in single, double or triple ratios. The DODGE RHB and
More informationHYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 14 / A / 103 / 0309 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 14 / A / 103 / 0309 / E Pump Drives - Gearboxes Mechanical Dry Clutches Hydraulic Clutches Pump Adaptors CONTENTS Pump Drives AM
More informationRELATED PRODUCTS. TORQUE-ARM Hydraulic Taper Bushed Speed Reducers. *Char-Lynn is a registered trademark of EATON. Reducer Size
TORQUE-ARM II TORQUE-ARM MAXUM Concentric TIGEAR-2 HYDROIL CHAR-LYNN* COMPATIBLE 6B SPLINE REDUCER New hydraulically powered DODGE TORQUE-ARM Twin Taper bushed speed reducers with 6B spline, SAE A 2-bolt
More informationINVOLUTE TOOLING CORPORATION
MANUFACTURERS OF DRIVES AND TRANSMISSIONS OFFICE: 13, JORBAGH, NEW DELHI - 110 003, INDIA, TEL: +91(011)24621453 FAX: +91(011) 24603609 WORKS: PLOT-65, SEC-27C, FARIDABAD - 121 003. INDIA, TEL: +91(0129)
More information800 Series Gear Reducers Built For Industrial Use
800 Series Built For Industrial Use Precision mounting surfaces and extra threaded bolt holes on top and bottom for flexibility and to accept a wide range of stock mounting accessories. Cast iron NEMA
More informationA REGAL-BELOIT COMPANY. More Than Just a Motor Company WASHGUARD WASHDOWN DUTY PT PRODUCTS ELECTRIC MOTORS, GEARMOTORS AND DRIVES.
A REGAL-BELOIT COMPANY More Than Just a Motor Company WASHGUARD WASHDOWN DUTY PT PRODUCTS ELECTRIC MOTORS, GEARMOTORS AND DRIVES Bulletin 1500 WASHGUARD WHITE EPOXY Enhanced Performance in Wet, Humid Areas
More informationHub City HERA - High-Efficiency Right Angle Gear Drives
Hub City - High-Efficiency Right Angle Gear Drives Features H-2 Online Tools and Apps H-3 Why? and Ordering Information H-4 Selection and Ratings H-5 Dimensions H-6 Accessories H-7 to H-10 Engineering
More informationSome customers opt to manually power their actuators. In those cases hand wheels are usually the preferred drive component.
EXTERNAL POWER SOURCE AND GEAR REDUCER All actuators require an external power source. Whether this power source be an electric motor or hand wheel Duff-Norton has the required component. Customers who
More informationPARALLEL SHAFT DRIVES
ARALLEL SHAT RIVES Introductory Information...-2 re-selection Information...-3 Quick Selection Tables...-4, 5 Rating and imensions Helical Ratio ultipliers...-6 to -9 odel 22 - Single Reduction Speed Reducer...-10,
More informationSpherical Roller Bearings Units: Rexnord PT Select Series
Excerpt from Rexnord Bearings Catalog #BR101-100EN Spherical Roller Bearings Units: Rexnord PT Select Series Contents Page Features and Benefits 192 Nomenclature 193 Engineering 194 Dimensions Pillow Blocks
More informationIntroduction. Stainless Steel Cover. Removable Carriage Plate. Mounting Platform. Limit Switch & Bracket. Aluminum Beam.
Introduction The HepcoMotion SBD is an exceptionally rugged, quiet and precise linear unit. It uses super-smooth Hepco LBG caged linear ball guides having such high load capacity that system life is rarely
More informationLONG LENGTH DESIGN MANUAL CONTENTS PAGE. Introduction Long Length features & benefits... 2 Long Length belting programme... 7
DESIGN MANUAL LONG CONTENTS PAGE LENGTH Introduction Long Length features & benefits... 2 Long Length belting programme... 7 Drive Design Belt drive selection procedure... 8 Belt pitch selection guides...
More information2000HB K-SERIES HELICAL BEVEL GEAR REDUCER
2000HB K-SERIES HELICAL BEVEL GEAR REDUCER INSTALLATION AND MAINTENANCE MANUAL January 22, 2018 7997 Allison Avenue, Indianapolis, IN 46268 Website: www.sterlingelectric.com (800) 866-7973 FAX (317) 872-0907
More informationCyclo Modular System General Information Gearmotors General Information Helical Buddybox Type Designation... 12
Front Cover Buddy Box In preparing our new catalogue we have made every effort to present the information in a clear and concise manner. We hope you will find the format to be satisfactory, enabling you
More informationVIS (Valve-In-Star) Hydraulic Motor
VIS (Valve-In-Star) Hydraulic Motor VIS 30 Series VIS 40 Series VIS 45 Series The next step in the evolution of low speed high torque (LSHT) hydraulic motors. EATON Low Speed High Torque Motors E-MOLO-MC001-E5
More informationFeatures And Benefits.IMPERIAL... B14-2.IMPERIAL-IP... B14-4.IMPERIAL-HD... B14-6 ISAF-HYD... B14-10.ISN / ISNX-HYD... B14-12
CONTENTS - IP, ISAF and ISN Features And Benefits..................................................................... B14-2.-IP... B14-4.-HD... B14-6 ISAF-HYD...................................................................
More information6 Project Planning for Components on the Input Side
Gear units with IEC or NEMA adapter AM ( GK) Project Planning for Components on the Input Side.1 Gear units with IEC or NEMA adapter AM ( GK) GK Figure 14: Helical-worm gear unit with adapter AM 04588AXX
More information.1 Standard Features NORDBLOC.1 SERIES. Intelligent Nordbloc Drivesystems. Innovative Design F1012
Intelligent Nordbloc Drivesystems.1 Standard Features NORDBLOC.1 SERIES F1012 Bearing Design The design of the bearing systems is a key innovation in the new NORDBLOC.1 units. The output bearing is greatly
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationQUANTUM PARALLEL SHAFT FAN DRIVE by Amarillo Gear Company
QUANTUM PARALLEL SHAFT FAN DRIVE by Amarillo Gear Company The patented Quantum Parallel Shaft Fan Drive for dry cooling systems reflects a long history of quality workmanship and reliability. Amarillo
More information2000HG NEW STYLE HELICAL GEAR RATIO MULTIPLIER. INSTALLATION AND MAINTENANCE MANUAL May 4, Indianapolis, Indiana (800)
2000HG NEW STYLE HELICAL GEAR RATIO MULTIPLIER INSTALLATION AND MAINTENANCE MANUAL May 4, 2017 Indianapolis, Indiana (800) 866-7973 e-mail: sales@sterlingelectric.com www.sterlingelectric.com 7997 Allison
More informationTECHNICAL SERVICE MANUAL
TECHNICAL SERVICE MANUAL VIKING HELICAL GEAR REDUCERS "A", "B", AND "C" SIZES SECTION TSM 610 PAGE 1 OF 9 ISSUE E CONTENTS Special Information 2 Lubrication 2 Installation 3 Operation 3 Disassembly 3 Assembly
More informationINSTALLATION AND OPERATION
WARNING: Because of the possible danger to persons(s) or property from accidents which may result from the improper use of products, it is important that correct procedures be followed. Products must be
More informationPRODUCT OVERVIEW HIGHEST PRECISION
PRODUCT OVERVIEW If you need high precision gear reducers at a reasonable cost and you value innovation and excellent service, take a close look at our product line. You ll find a wide range of products
More informationK/KL Series: RIGHT ANGLE Versatile Outputs
ServoFit Planetary & Modular Gearheads K/KL Series: RIGHT ANGLE Versatile Outputs STOBER K Series helical/bevel gear drives are the most versatile ServoFit right angle gearheads. With mounting flexibility
More information