Board-to-wire/Wire-to-wire HCM.64 non-waterproof low profile type connector for automobile corresponding to the miniaturization of the automotive electrical equipment. Comply with the performance specification for automotive electrical connector systems, and corresponds to various purposes and mounting design. Features Low profile, Miniaturization in the direction of mating Using the short length female terminal, low profile in the direction of mating is realized Variations We have an abundant variation of PC board lock mechanism, lock type, wire-to-wire type and so on, according to your needs. Reliability and achievement Ensuring the reliabilities of an indispensable characteristic and mechanism etc. to the connector for automobile, this product has several adoption results proven in automotive electrical equipment miniaturized rapidly. Specifications Current rating: A AC, DC (.mm 2, Single circuit) Voltage rating: 14V AC, DC Temperature range: -4 C to +1 C (including temperature rise in applying electrical current) Contact resistance: Initial value/2mω max. After environmental testing/2mω max. Insulation resistance: 2MΩ min. Withstanding voltage: 1,V AC/minute Applicable wire: SE/ AVSS/ CAVS.3mm 2 to.mm 2 Contact JST if Lead-Free product is required. Contact JST for details. 1
Board-to-wire/Wire-to-wire HIT AIT HCM MIO CPT BMD CIT HIC SQS SQM SQH SQS2 SQW SQF SHUNT RING FEL FMT FOX CN EA1 WPZ JUNCTION BOX INDEX 11 Female terminal 2.(.98) Female connector Inner lock type 11.(.433) 12.46(.491) 32.78(1.291) 11.6(.47) 3 =7.62(.3) HCMPB-4-S 11 =27.94(1.1) HCMPB-12-S Type Inner lock SHCM-A3T-P2 SHCM-A4T-P2 11.(.433) 1.(.91) 32.78(1.291) 11 =27.94(1.1) 4 12 12 Applicable wire range Conductor (mm 2 ).3 to..2 4 =1.16(.4) Insulation O.D. mm(in.) 1.4 to 2.1 (. to.83) 1.2 to 1.7 (.47 to.67) Copper alloy, tin-plated (reflow treatment) HCMPB-A-S HCMPB-A12-S HCMPB-4-S HCMPB-A-S HCMPB-12-S HCMPB-A12-S : PBT, natural (white) : PBT, blue Q ty/reel,, 6 2 2
Board-to-wire HCM Female connector Outer lock type W/CPA type 1.7(.423) 1.(.91) 8.(.31) 12.46(.491) 8.9(.32) 4 =1.16(.4) HCMPB--S 12.(.494) 3 =7.62(.3) [2.8(.819)] 1.8(.622) Double-row type Double-row type HCMDPB-8-S Type Outer lock W/CPA Double-row Double-row 17.4(.691) =12.7(.) 1.(.91) 6 8 9 9.2(.364) HCMPB-C6-S 12.(.494) 4 =1.16(.4) HCMDPB-9-S HCMPB--S HCMPB-C6-S HCMDPB-8-S HCMDPB-9-S : PBT, natural (white) : PBT, blue CPA housing (Only for 6 circuits): Glass-filled PBT, red 3 4 4 12
Board-to-wire HIT AIT HCM MIO CPT BMD CIT HIC SQS SQM SQH SQS2 SQW SQF SHUNT RING FEL FMT FOX CN EA1 WPZ JUNCTION BOX INDEX 13 Header Top entry type Inner lock type 2.(.98)dia. 17.78(.7) 1.16(.4) Outer lock type circuits 6 circuits Screw hole type 1 17.78(.7) 1.16(.4) 2.32(.8) 1 6 12.7(.) 1.24(.6) 26.32(1.36) 2.32(.8) 1 4 7.62(.3) 12.7(.) 6.8(.268) 8.(.33) 12.(.472) 12.(.472) 1.8(.42) BB-HCMSS-R 433 : Glass-filled PBT, natural (white) 6 BB-AHCMSK B6B-HCMSK : Glass-filled PBT, natural (white) 4 B4B-HCMSS-RA 3 : Glass-filled PBT, natural (white) 288 24
HCM Header Side entry type Hook pin type 4 circuits 3 circuits 1.24(.6) 19.(.7) 1 4 7.62(.3) 13.97(.) 1.24(.6) 19.(.7) 1 4 13.97(.) 12.8(.4) 1.8(.42) 12.8(.4) 1.8(.42) 4 3 S4B1-HCMSS S4B1A-HCMSS 16 16 : Glass-filled PBT, natural (white) Reinforcement: Brass, nickel-undercoated, tin-plated (reflow treatment) 14
Wire-to-wire HIT AIT HCM MIO CPT BMD CIT HIC SQS SQM SQH SQS2 SQW SQF SHUNT RING FEL FMT FOX CN EA1 WPZ JUNCTION BOX INDEX Male terminal Male connector [23.8(.939)] 7.2(.283) 8.9(.32) 12.(.492) 17.8(.71) 3.8(1.213) 14.6(.77) 4 =1.16(.4) Female connector 8.6(.341) 4 =1.16(.4) 1.(.91) SHCMW-A3T-4 Applicable wire range Conductor (mm 2 ).3 to. Insulation O.D. mm(in.) 1.4 to 2.1 (. to.83) Brass, tin-plated (reflow treatment) HCMWSB--K 2 PBT, black HCMWPB--K PBT, black Q ty/reel, Q ty/bag Q ty/bag 1
HCM PC board layout 1.1 +.1 (.43 +.4 )dia. 1.1 +.1 3.4 +.1 (.43 +.4 )dia. (.134 +.4 )dia. 2.32±.1(.8±.4) Assembly layout BB-HCMSS-R HCMPB--S 16.(.6) BB-HCMSS-R 1.3 +.1 (.3 +.4 )dia. 2.±.(.98±.2) 2.4±.(.1±.2) 1.16±.(.4±.2) 4.4±.(.17±.2) 2.4±.(.1±.2) 7.62±.(.3±.2) HCMPB-4-S 17.(.689) B4B-HCMSS-R4 1.1 +.1 (.43 +.4 )dia. 1.1 +.1 3 +.1 (.43 +.4 )dia. (.118 +.4 )dia. HCMPB-A-S 17.(.689) BB-AHCMSK HCMPB-4-S BB-AHCMSK 13.97±.1(.±.4) 1.3 +.1 (.3 +.4 )dia. 2.±.(.98±.2) 2.4±.(.1±.2) 1.16±.(.4±.2) 7.62±.(.3±.2) 2.4±.(.1±.2) 9.4±.(.37±.2) S4B1-HCMSS 2.2 +.1 3 +.1 (.87 +.4 )dia. 1.1 +.1 (.118 +.4 )dia. (.43 +.4 )dia. 13.97±.1(.±.4) B4B-HCMSS-R4 S4B1-HCMSS S4B1A-HCMSS Note: 1. Tolerances are non-cumulative: ±.mm (±.2") for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 17.(.689) B6B-HCMSK Top entry type Side entry type Wire-to-wire type Crimping machine, Applicator Strip terminal SHCM-A3T-P2 SHCM-A4T-P2 Crimping machine AP-K2N Dies MK/SHCM-A3-2 MK/SHCM-A4-2 Crimp applicator MKS-L Crimp applicator with dies APLMK SHCM-A3-2 APLMK SHCM-A4-2 34.1(1.343) HCMWPB--K Note: When crimping operation is conducted by using other than above applicator and die set, JST cannot guarantee the performance of connector. 2.7 +.1 (.16 +.4 )dia. 2.±.(.98±.2) 2.4±.(.1±.2) 12.7±.(.±.2) 2.4±.(.1±.2) 9.4±.(.37±.2) HCMWSB--K 16