MINING & DRILLING PRODUCTS P Core Retrieval System
CORE BARREL ASSEMBLY, P -0-0 Core Barrel Assembly, 0 ft (.0 m) -0-0 Core Barrel Assembly, ft (. m) -0-0 Inner Tube Assembly, 0 ft (.0 m) -0-00 Inner Tube Assembly, ft (. m) 0 Locking Coupling, Conventional, Tang 00 Adaptor Coupling 00 Landing Ring A - 00 Outer Tube, 0 ft (.0 m) B - 00 Outer Tube, ft (. m) 00 Inner Tube Stabilizer 0000 Head Assembly A - 00 Inner Tube, 0 ft (.0 m) B - 00 Inner Tube, ft (. m) 00 Stop Ring 000 Core Lifter, Slotted 0 00 Core Lifter Case Note: Please refer to the P Core Barrel Options and Kits page for alternatives to the standard P Core Barrel components. A B A B 0.00.. www.di-corp.com info@di-corp.com
CORE BARREL OPTIONS AND KITS, P Item Part No Description 0 Locking Coupling, Conventional, No Tang 00 Locking Coupling, Full-Hole, Tang 0 Locking Coupling, Full-Hole, No Tang 00 Landing Indicator, Bushing, No OD Groove 00 Shut-Off Valve, Soft 00 Solid Spindle Spacer 0 Inner Tube Cap Assembly, With Thread Protector 0 Inner Tube Coupling 00 Graphite Core Barrel Plug 0 00 Gauge Assembly, Bit & Shell.00.. www.di-corp.com info@di-corp.com
HEAD ASSEMBLY, P - - 0000 Head Assembly, P 00 Spearhead Point 00 Spearhead Spring 00 Detent Plunger 00 Spearhead Pin 00 Spearhead Base 00 Latch Retracting Pin 0 Latch Retracting Case 0 Latch Body, Upper 00 Latch Pivot Pin 0 000 Latch Spring 00 Latch* 00 Landing Shoulder* 00 Stainless Steel Ball 00 Landing Indicator Bushing, OD Groove 00 Latch Body, Lower 00 Nord-Lock Washer 00 Hex Nut 00 Spindle 00 Shut-Off Washer* 0 00 Shut-Off Valve, Hard* 00 Tapered Shut-Off Washer* 00 Spindle Bearing, Upper 00 Spindle Bushing* 00 Spindle Bearing, Lower 00 Compression Spring 00 Shelf Locking Hex Nut 00 Inner Tube Cap Assembly, No Thread Protector* 00 Thread Protector, Inner Tube Cap* Note: Items with * are exclusive to the P Wireline System. All other items are common between H & P systems. Please refer to the P Core Barrel Options and Kits page for alternatives to the standard P Head Assembly components. 0 0.00.. www.di-corp.com info@di-corp.com
INNER TUBE CAP ASSEMBLY, P - - 00 Inner Tube Cap Assembly, P 00 Inner Tube Cap Body 00 Grease Fitting 00 Stainless Steel Ball 00 Check Valve Body.00.. www.di-corp.com info@di-corp.com
INNER TUBE CAP ASSEMBLY, P - - 0 Inner Tube Cap Assembly, P With Thread Protector 00 Inner Tube Cap Body 00 Grease Fitting 00 Stainless Steel Ball 00 Check Valve Body 00 Thread Protector, Inner Tube Cap.00.. www.di-corp.com info@di-corp.com
CONVERSION KIT, P - - 0 Conversion Kit, Link-Latch P to Edge Latch P 00 Edge Latch 000 Latch Spring 00 Latch Retracting Pin 00 Latch Pivot Pin 00 Drift Pin Tool - Latch Retracting Pin 00 Drift Pin Tool - Latch Pivot Pin 0 Conversion Instructions (not shown) 0 Parts Pouch (not shown).00.. www.di-corp.com info@di-corp.com
FLUID RETENTION KIT, NHP - - 000 Fluid Retention Kit, NHP 00 Stainless Steel Ball 00 Fluid Retention Bushing, Standard 0 Fluid Retention Bushing, Heavy Mud 000 Compression Spring, Light (Green) 000 Compression Spring, Medium (Blue) 000 Compression Spring, Heavy (Red) Note: Heavy mud fluid retention bushing (0) has a small groove machined into the OD of the part. A Parts Pouch is available separately (0)..00.. www.di-corp.com info@di-corp.com
OVERSHOT ASSEMBLY, P - - 0 Overshot Assembly, P 00 Cable Swivel Eye Bolt 00 Cable Swivel Collar 000 Thrust Bearing 00 Castle Nut 00 Cotter Pin 00 Grease Fitting 00 Cable Swivel Body 00 Jar Staff 00 Jar Tube 0 00 Locking Sleeve, Slotted 00 Hex Nut 00 Nord-Lock Washer 000 Overshot Head Assembly 00 Loading Fork Tool 0 Loading Funnel 0.00.. www.di-corp.com info@di-corp.com
OVERSHOT HEAD ASSEMBLY, P -0-000 Overshot Head Assembly, P 00 Overshot Head Body 00 Self Locking Set Screw 00 Compression Spring 000 Lifting Dog 00 Pivot Pin 00 Sway Pin 00 Pin Link 00 Self Locking Cap Screw 0 Spring Pin 0 0 Overshot Sleeve 0.00.. www.di-corp.com info@di-corp.com
CASING ADVANCER ASSEMBLY, PW - - 0 Casing Advancer Assembly, PW 0 Spearhead 00 Nord-Lock Washer 0 Release Shaft 00 Latch Body 00 Latch Shoe 0 Latch Shoe Spring 0 Locating Pin 000 Stop Latch Set ( parts) 00 Stop Latch Pin 0 0 Cotter Pin 00 Stop Latch Spring 00 Spacer Set (0 parts) 00 Bit Sub (c/w -/ API Reg. Box) 0 Loading Sleeve 0 Driver 0 0 - - 0 Inner Assembly Note: System consists of an Inner Assembly (with loading sleeve) and Driver. Driver has PW Casing thread connections. System works with P Overshot for insertion & retraction..00.. www.di-corp.com info@di-corp.com