EQUIPMENT LEGS AND ACCESSORIES

EQUIPMENT LEGS ND ESSORIES 800-526-3694 1

lphabetical Index DESRIPTION PGE DESRIPTION PGE ESSORIES LUMINUM LEGS PPLINE LEGS RKETS, UNDERSHELF RKETS, QUIK ORNERS LMPS, SPRING ROSS RE FITTINGS ORNER RKETS E EQUIPMENT LEGS S PLSTI EONOLINE HEVY- DUTY S/S EXTR WIDE, STINLESS LD SEISMI/security F FITTINGS, ROSS RE FOOT INSERTS, DJUSTLE FLNGED STINLESS LD PLSTI Seismic restraint FOOT LEVELERS FORMED METL LEGS 25-26 21 21-22 26 25 26 25 25 10-17, 24 11 12 13-17 17 10 25 5-9 9 6 6 26 18 L LEG SSEMLIES LEG SOKETS LEGS, PPLINE LEGS, EQUIPMENT LEVELERS, FOOT M MOUNTING PLTES O ORDER FORMS H FRME SSEMLY STINLESS STEEL LEG SSEMLIES P PLTES, MOUNTING PLSTI LEGS, EQUIPMENT S SEURITY LEGS SHELF SUPPORTS SOKETS, LEG SPRING LMPS T THRED ONVERTER U UNDERSHELF RKETS 18, 19 3, 4 21-22 10-17 26 26 20 19 26 11 10 3 3, 4 26 23 26 H HOLE PLUG 26 HI-RISE DJUSTLE FOOT INSERTS 7 H-FRME SSEMLY 20 Member Organizations omponent Hardware Group is a proud member of the following organizations Products shown in this catalog may be listed and/or certified by one or more of the following regulatory agencies and will be designated by the following marks US NSF 61/9 UP ODE OMPONENT US FM PPROVED ll photographs and illustrations are considered to be a representation of the actual item. In some cases there may be slight variations. This catalog, copy, part numbers and unique method of illustrating products is copyrighted by omponent Hardware Group, Inc. ll rights reserved. No portion of this catalog may be reproduced in any form or by any means in whole or in part, without the written consent of omponent Hardware. omponent Hardware reserves the right to make any and all changes and to discontinue any of its products without notice. Not responsible for typographical errors. copyright 2016 omponent Hardware Group, Inc. #T-X021 07/2016 PRINTED IN U.S..

Leg Sockets & Shelf Supports ZIN PLTED STEEL LEG SOKETS STRIGHT OR FLRED MODELS VILLE LOKING SET SREW PROVIDED FOR SEURE SSEMLY PERMITS KD SHIPPING REF. MODEL NO. HEIGHT MTERIL PPLITION a26-0207- 3 (76mm) ZIN PLTED a a28-0207- 2-5/8 (66mm) ZIN PLTED (41mm) O.D. TUING or IPS Pipe STINLESS STEEL TUULR SHELF SUPPORTS FOR (41mm) O.D. TUING LONG ND SHORT LENGTH MODELS VILLE FURNISHED WITH LOKING SET SREWS N E USED S DJUSTLE POT RK ND SUPPORT REF. MODEL NO. HEIGHT PPLITION 24-0206- 1-7/8 (48mm) D 24-0207- 5-1/4 (133mm) D (41mm) O.D. TUING (41mm) O.D. TUING REF. 1-7/8 (48mm) REF. 2-1/4 REF. REF. D (57mm) 2-5/8 (66mm) 3 (76mm) 1-7/8 (48mm) 5-1/4 (133mm) 16 GUGE LL STINLESS STEEL LEG SOKET UNIQUE INTERIOR GEOMETRY TIGHTLY FITS THE DIMETER OF THE LEG INRESED SURFE ONTT IMPROVES STILITY 2 OUTSIDE DIMETER FOR OD TUING STIN STINLESS STEEL FINISH FLNGED TOP FOR ESE OF WELDING PERMITS KD SHIPPING TO REDUE FREIGHT OSTS LOKING SET SREW ENSURES SEURE SSEMLY MODEL NO. 19-1000 3.06 1.58 2.44 2.00 PTENT PENDING NSF STNDRDS GOVERNING THE USE OF SET SREWS IN NON-FOOD ZONES REQUIRE THE PLUGGING OF THE SOKET HOLE FTER FINL SSEMLY ND TIGHTENING. THIS MY E OMPLISHED Y PPLYING HRDENING TYPE SILIONE SELNT OR THE USE OF HOLE PLUG. STNDRD NSF TYPE PUSH-IN PLSTI HOLE PLUGS RE VILLE...SPEIFY 10-0020 WHEN ORDERING, SEE PGE 24. DDITIONL 5/16-24 SET SREWS RE VILLE...SPEIFY 18-X001 WHEN ORDERING. 800-526-3694 1

Stainless Steel Leg Sockets F ** D G * E E STINLESS STEEL LEG SOKETS FOR & O.D. LEG SSEMLIES ONSTRUTED OF 16 ga (1.5mm) STINLESS STEEL TUING PROVIDED WITH LOKING SET SREW TO SSURE SEURE SSEMLY MODELS VILLE WITH PLIN OR FLRED TOP FOR WELD ON PPLITIONS OR WELDED STINLESS STEEL MOUNTING PLTES PERMITS KD SHIPPING REF. MODEL NO. HEIGHT PPLITION DI. 16-0206- * 18-0203- 3-1/4 (82mm) 18-0206- 3-1/1 (78mm) E 18-0406- 3-1/8 (79mm) ** 18-9900- 3-1/1 (78mm) D 20-0206- 3-1/2 (89mm) F 20-0406- 3-9/1 (90mm) (41mm) O.D. TUING or I.P.S. PIPE G 18-0202- 2-7/1 (62mm) E 18-0402- 2-1/2 (64mm) O.D. TUING 2 (51mm) 2-7/1 (62mm) 2-7/1 (62mm) 2-7/1 (62mm) 2 (51mm) HGT. HGT. HGT. HGT. DI. REF. DI. REF. DI. REF. ** DI. REF. 2-3/4 (70mm) 3-1/2 (89mm) 3-1/2 (89mm) 2-1/4 (57mm) HGT. HGT. HGT. HGT. DI. REF. D DI. REF. E DI. REF. F DI. REF. G 2 *furnished without flared top **FURNISHED WITH 2 SET SREWS. MOUNTING PLTE HS (4) 5/1(8mm) DI. HOLES ON 2-5/8 (66mm) ENTERS. NSF STNDRDS GOVERNING THE USE OF SET SREWS IN NON-FOOD ZONES REQUIRES THE PLUGGING OF THE SOKET HOLE FTER FINL SSEMLY ND TIGHTENING. THIS MY E OMPLISHED Y PPLYING HRDENING TYPE SILIONE SELNT OR THE USE OF HOLE PLUG. STNDRD NSF TYPE PUSH-IN PLSTI HOLE PLUGS RE VILLE...SPEIFY 10-0020 WHEN ORDERING, SEE PGE 24. DDITIONL 5/16-24 SET SREWS RE VILLE...SPEIFY 18-X001 WHEN ORDERING. www.componenthardware.com

Foot Inserts For Round Tubing DJUSTLE FOOT INSERTS FOR ROUND TUING D E F G H onventional Round & Hex djustable Toes For Round Tubing and Pipe vailable in: Natural Finish Zamak Nickel Plated Zamak Thermoplastic, Gray or lack Stainless Steel lad DJUSTLE TO LEVEL EQUIPMENT ON JO SITE MOST TOES SUPPLIED WITH WRENH FLTS FOR ESY DJUSTMENT REF. MODEL NO. FOOT DESRIPTION TYPE HEIGHT DJ. LOD RTING PPLITION 10-0221- NIKEL PLTED ZMK 11/1 (18mm) 13/1 (21mm) 1100 (500) 1 (25mm) O.D. TUING 16 ga (1.5mm) & 18 ga (1.2mm) 10-0421- NIKEL PLTED ZMK 3/4 (19mm) 1-1/8 (28mm) 1400 (635) O.D. TUING 16 ga (1.5mm) D 10-0611- 10-0651- 10-0631- 10-0641- NTURL FINISH ZMK STINLESS STEEL LD THERMOPLSTI LK THERMOPLSTI GRY 1-3/8 (35mm) 1-3/8 (35mm) 1-1/8 (28mm) 1-1/1 (27mm) 1-1/1 (27mm) 200 (90) 200 (90) O.D. TUING 16 ga (1.5mm) or I.P.S. PIPE *OPTIONL POSI-GRIP LOKING RING MODEL NO. 10-0010- SPRING STEEL WITH LETS THT GRIP ND ITE TUING TO LOK FOOT TO TUE. E 10-0811- NTURL FINISH ZMK 1-1/8 (28mm) F* 10-0851- G 10-0852- STINLESS STEEL LD STINLESS STEEL LD ROUND (41mm) O.D. TUING 16 ga (1.5mm) 10-0831- THERMOPLSTI LK 1-3/8 (35mm) 1-1/1 (27mm) 200 (90) D 10-0841- THERMOPLSTI GRY 1-3/8 (35mm) 1-1/1 (27mm) 200 (90) H 11-0851- STINLESS STEEL LD 1 (25mm) 2 (51mm) 2300 (1040) 2 (52mm) O.D. TUING 16 ga (1.5mm) HEIGHT * Shown with optional Posi-Grip Locking Ring 800-526-3694 3

Seismic Restraint and Engineered Plastic djustable Foot Inserts STINLESS STEEL LD PLSTI DJUSTLE FOOT INSERT FOR ND (41mm) ROUND TUING Stainless Steel LD TOE Economical Offers a full adjustment WRENH FLTS ND Unique threading offers smooth, fast field adjustment Each model designed to suit either 16 ga (2mm) or 18 ga (1mm) round tubing Specially designed engineered plastic construction withstands today s harsh chemical cleansers in commercial kitchen environments *OPTIONL POSI-GRIP LOKING RING MODEL NO. 10-0010- SPRING STEEL WITH LETS THT GRIP ND ITE TUING TO LOK FOOT TO TUE. 2-1/1 (52mm) 2-11/1 (69mm) MODEL NO. PPLITION TYPE HEIGHT DJ. LOD RTING 10-1000 10-1500 (41mm) O.D Tubing 16 ga (1.5mm) & 18 ga (1.2mm) O.D Tubing 16 ga (1.5mm) & 18 ga (1.2mm) 1000 lbs (450 kg) 1000 lbs (450 kg) DJUSTLE SEISMI RESTRINT FOOT MODEL NO. 10-0852-S 7/1 Dia. (.44mm) hole in bottom of toe to permit secure anchoring to rebar in floor Meets SMN guidlines for seismic restraint of equipment Stainless steel clad zamak construction will not corrode For O.D. (41mm), 16 gauge (1.5mm) tubing pplications djustable round toe permits height adjustment Static load rating to 2000lbs (900kg) vailable with optional posi-grip locking ring for added pull-out strength *OPTIONL POSI-GRIP LOKING RING MODEL NO. 10-0010- SPRING STEEL WITH LETS THT GRIP ND ITE TUING TO LOK FOOT TO TUE. 7/1 (.44mm) DI. OPENING 4 www.componenthardware.com

djustable Foot Insert Features Full 3 djustment HI-RISE DJUSTLE FOOT INSERTS Full 3 (76mm) HEIGHT adjustment Rugged 2000 lbs STTI load rating Stainless steel flanged models VILLE Ideal for lengthy cafeteria lines and counters where floor pitch is a concern Eliminates costly field modification Maximum height adjustment helps avoid plumbing obstacles and other unforeseen conditions during installation of equipment djustable Foot Inserts, specified by Engineers and onsultants, are specifically designed to meet pending OSH requirements which suggest maximum counter and table adjustments to permit comfortable working environments. 3 (76mm) DJUSTLE FOOT INSERT TO SUIT (41mm) O.D. TUING 16 ga (1.5mm) MODEL NO. DESRIPTION TYPE HEIGHT DJ. LOD RTING 10-0881- STINLESS STEEL 10-0884- S/S FLNGED W/ (2) 11/32 (9mm) DI. MOUNTING HOLES FLNGED 3 (76mm) 3 (76mm) 2000 lbs (900 kg) 2000 lbs (900 kg) *OPTIONL POSI-GRIP LOKING RING MODEL NO. 10-0010- SPRING STEEL WITH LETS THT GRIP ND ITE TUING TO LOK FOOT TO TUE. 3-7/8" (99mm) 3-7/8" (99mm) EXTENSION 4-1/2" (114mm) HEIGHT 1-1/2" EXTENSION 4-1/2" (114mm) HEIGHT 1-1/2" HEIGHT 3 1/2" (89mm) 800-526-3694 5

Foot Inserts For Square Tubing DJUSTLE FOOT INSERTS For Square Tubing D vailable with ZIN, Nickel OR Stainless Steel lad FINISH djustable to level equipment on job site Wrench flats for easy adjustment 2 (51mm) MODEL OMPLETE WITH RETINING RING ND HEVY-DUTY ONSTRUTION HEIGHT REF. MODEL NO. FOOT DESRIPTION TYPE HEIGHT DJ. LOD RTING PPLITION D 14-0221- 14-0411- 14-0421- 14-0611- 14-0651- 15-0851- NIKEL PLTED ZMK NTURL FINISH ZMK NIKEL PLTED ZMK NTURL FINISH ZMK STINLESS STEEL LD STINLESS STEEL LD 11/1 (18mm) 1-3/8 (35mm) 1 (25mm) 7/8 (22mm) 1-1/8 (28mm) 1 (25mm) 1-1/8 (28mm) 1-1/8 (28mm) 2 (51mm) 1200 (550) 2300 (1040) 1 (25mm) SQ. TUING 16 ga (1.5mm) or 18 ga (1.2mm) SQ. TUING 16 ga (1.5mm) or 18 ga (1.2mm) SQ. TUING 16 ga (1.5mm) or 18 ga (1.2mm) 2 (51mm) SQ. TUING 16 ga (1.5mm) 6 www.componenthardware.com

Flanged Foot Inserts For Round & Square Tubing FLNGED DJUSTLE FOOT INSERTS For Round or Square Tubing or Pipe D E F G NOTE: Ref. D and E shown with optional posi-grip locking rings vailable with Stainless Steel lad OR Nickel Plated FINISH vailable with or without Mounting Holes djustable to level equipment on job site reduced flange models available FLNGE DI. HEIGHT REF. MODEL NO. FLNGE DESRIPTION HEIGHT DJ. LOD RTING Lbs/Ft (Kg/mm) PPLITION 14-0224- 1-3/1(30mm) DI. NIKEL PLTED ZMK 3/4 (17.5mm) 1/2 (12mm) 1200 (550) 1 (25mm) SQURE TUING 16 ga (1.5mm) & 18 ga (1.2mm) 14-0424- 2-1/8 (54mm) NIKEL PLTED zamak 1-3/8 (35mm) 1 (25mm) SQURE TUING 16 ga (1.5mm) OR 18 ga (1.2mm) D* 10-0654- 3-1/2 (89mm) DI. S/S WITH MOUNTING HOLES** 1-1/8 (28mm) I.P.S. PIPE OR O.D. ROUND TUING 16 ga (1.5mm) * 14-0653- * 14-0654- 3-1/2 (89mm) DI. S/S NO MOUNTING HOLES 3-1/2 (89mm) DI. S/S WITH MOUNTING HOLES** 1-1/8 (28mm) 1-1/8 (28mm) SQURE TUING 16 ga (1.5mm) OR 18 ga (1.2mm) E 10-9904- 2 (50mm) DI. S/S NO MOUNTING HOLES ) 1-1/8 (28mm)) (41mm) O.D. ROUND TUING FOR MRINE PPLITION 16 ga (1.5mm) D* 10-0853- D* 10-0854- 3-1/2 (89mm) DI. S/S NO MOUNTING HOLES 3-1/2 (89mm) DI. S/S WITH MOUNTING HOLES** 1-1/8 (28mm) 1-1/8 (28mm) (41mm) O.D. ROUND TUING 16 ga (1.5mm) F* 11-0854- 3-1/2 (89mm) DI. S/S WITH MOUNTING HOLES** 1 (25mm) 2 (51mm) 2300 (1040) 2 (51mm) O.D. ROUND TUING 16 ga (1.5mm) G* 15-0854- 3-1/2 (89mm) DI. S/S WITH MOUNTING HOLES** 1 (25mm) 2 (51mm) 2300 (1040) * Flanged Foot Models Have 12 G. (2.6mm) Stainless Steel Flange With #4 Satin Finish. ** Provided With (2) 11/32 (9mm) DI. Mounting Holes, Spaced 2-1/2 (64mm) O.. 2 (51mm) SQURE TUING 16 ga (1.5mm) OR 18 ga (1.2mm) 800-526-3694 7

Security /Seismic Heavy-Duty Leg ssemblies SEURITY/SEISMI EQUIPMENT LEGS STINLESS STEEL THREDED STEEL STUD OR WELDED MOUNTING PLTE PROVIDED FOR ESY MOUNTING OF LEGS TO EQUIPMENT FOOT INSERTS RE PROVIDED WITH 3-1/2 (89mm) DI. 11 ga (3mm) FLNGE LL LEGS MY E FURNISHED TO MEET SPEIFI REQUIREMENTS WITH SPEIL STUDS ND/OR MOUNTING PLTES LEGS MY E FURNISHED IN SETS OF FOUR WITH USTOMER S PRT NUMERS FOR KD SHIPPING MOUNTING PLTE HS (4) 5/1 (8mm) DI. MOUNTING HOLES ON 2-5/8 ENTERS FLOOR FSTENED STINLESS STEEL SEURITY/SEISMI EQUIPMENT LEGS MODEL NO. 47-9932- 50-9939- 88-9902- 90-9902- DESRIPTION (41mm) O.D. WITH WELDED MOUNTING PLTE (41mm) O.D. WITH 1/2-13 PROTRUDING STUD 2 (51mm) O.D. WITH WELDED MOUNTING PLTE 2 (51mm) O.D. WITH 3/4-10 PROTRUDING STUD Easily modified to meet SMN seismic restraint requirements. First, drill a 5/8 (16mm) diameter hole in flanged toe to accommodate anchored floor rod. Then, simply drill a 1/4 (6mm) diameter horizontal hole through toe portion which allows leg to be pinned to anchored rod. (Pin not furnished) 1/8 (3mm) 3-1/2 (89mm) 3/4 (19mm) DJ. MTERIL: FINISH: TOE DJUSTMENT: STTI LOD RTING: DJ. SPEIFITIONS (41mm) ND 2 (51mm) O.D. STINLESS STEEL TUING #4 STIN FINISH LEGS RE IN HEIGHT ND provide DJUSTMENT 2,000 lbs (900kg) PER LEG Security/Seismic Equipment Legs are specifically designed for Marine, Prison and Institutional applications where installations require Secured Floor-Fastened djustable Legs on equipment that may be subjected to sudden movement or shifting. Equipment Legs are available in both (41mm) and 2 (51mm) O.D. models with a protruding threaded stud or welded 3-1/2 (89mm) 11 gauge (3mm) square mounting plate. The 3-1/2 (89mm) dia. flanged foot has two 11/32 (9mm) dia. floor fastening holes on 2-1/2 (63mm) centers. 8 www.componenthardware.com

HIGH IMPT S PLSTI EQUIPMENT LEGS S Plastic Equipment Legs FOR IE MKERS, REH-INS, OMMERIL REFRIGERTORS, OUNTERS & OMMERIL INETS 2-3/8 (60mm) 3/4 (19mm) 2000 lbs (900 kg) PER LEG STTI LOD RTING LK MTTE FINISH 3-1/2 (89mm) SQURE TOUGH, DURLE, HIGH IMPT RESISTNT S PLSTI ODY VILLE WITH NON-REMOVLE METL TOE WITH NON-MRRING S PLSTI SE OR LK S NON-MRRING TOE FULLY DJUSTLE TOE WRENH FLTS ON TOE FOR ESY DJUSTMENT 3/4 (19mm) DJ. MINIMUM HEIGHT WITH DJUSTLE TOE ORROSION RESISTNT ZIN PLTING ON LL STUDS 3/4 (19mm) DJ. MTG PLTE HS (4) 5/1(8mm) DI. HOLES ON 2-5/8 (66mm) ENTERS S PLSTI EQUIPMENT LEGS MODEL NO. MOUNTING TYPE LEG OLOR FOOT TYPE P63-2003- 1/2-13 FLUSH STUD WITH 3-1/2 SQURE MOUNTING PLTE LK LK P61-4003- 1/2-13 PROTRUDING STUD LK NIKEL PLTED ZMK P62-4003- 5/8-11 PROTRUDING STUD LK NIKEL PLTED ZMK P63-4003- P64-4003-* 1/2-13 FLUSH STUD WITH 3-1/2 SQURE MOUNTING PLTE 1/2-13 FLUSH STUD WITH 2-1/2 x 3-5/8 RETNGULR NON-REMOVLE MOUNTING PLTE LK LK * NON-STOK ITEM, SEE PG 24 FOR MOUNTING PLTE DETILS NIKEL PLTED ZMK NIKEL PLTED ZMK 800-526-3694 9

Economy Zinc Die ast Equipment Legs EONOLINE EQUIPMENT LEGS DIE ST ZMK THREDED STEEL STUD OR REMOVLE MOUNTING PLTE PROVIDED FOR ESY MOUNTING OF LEGS TO EQUIPMENT FOOT INSERTS RE SHPED TO PERMIT QUIK HEIGHT DJUSTMENT LL LEGS MY E FURNISHED TO MEET SPEIFI REQUIREMENTS WITH SPEIL STUDS ND/OR MOUNTING PLTES LEGS MY E FURNISHED PKGED IN SETS OF FOUR WITH USTOMER S PRT NUMER S N OPTION FOR KD SHIPPING vailable in finishes of... NIKEL, LK EPOXY, GRY EPOXY DURLE, HIP-RESISTNT FINISH REMOVLE MOUNTING PLTE or PROTRUDING STUD WRENH FLTS ON TOE FOR ESY DJUSTMENT 2-3/8 (60mm) 3/4 (19mm) 1 (25mm) DJ EONOLINE DIE ST EQUIPMENT LEGS MODEL NO. MOUNTING TYPE LEG FINISH FOOT TYPE E61-2003-* LK EPOXY FURNISHED WITH E61-2104- 1/2-13 GRY EPOXY E61-4002- PROTRUDING NIKEL STUD E61-5002- NIKEL S/S E62-4002- FURNISHED WITH NIKEL E62-2104- 5/8-11 PROTRUDING GRY EPOXY E62-5002- STUD NIKEL S/S E63-2003- FURNISHED WITH LK EPOXY E63-4002- 1/2-13 FLUSH STUD NIKEL W/ 3-1/2 SQURE E63-2104-* REMOVLE GRY EPOXY E63-5002- MOUNTING PLTE** NIKEL S/S * Non-stock item, See page 24 FOR MOUNTING PLTE DETILS 3-1/2 (89mm) SQURE 1 (25mm) DJ MTG PLTE HS (4) 5/1 (8mm) DI. HOLES ON 2-5/8 (66mm) ENTERS. MTERIL: TOE DJUSTMENT: STTI LOD RTING: SPEIFITIONS DIE ST ZMK ONSTRUTION LEGS RE IN HEIGHT ND PROVIDE DJUSTMENT 2000 lbs (900 kg) PER LEG 10 www.componenthardware.com

Stainless Steel Equipment Legs HEVY-DUTY STINLESS STEEL EQUIPMENT LEGS THREDED STEEL STUD OR REMOVLE MOUNTING PLTE PROVIDED FOR ESY MOUNTING OF LEGS TO EQUIPMENT LL LEGS MY E FURNISHED TO MEET SPEIFI REQUIREMENTS WITH SPEIL STUDS ND /OR MOUNTING PLTES LEGS MY E FURNISHED PKGED IN SETS OF FOUR WITH USTOMER S PRT NUMER FOR KD SHIPPING D HEVY-DUTY STINLESS STEEL 2 (51mm) O.D. EQUIPMENT LEGS TPERED ODY with LRGE FLRED TOP REMOVLE MOUNTING PLTE FLUSH or PROTRUDING MOUNTING STUD REF. MODEL NO. DESRIPTION FOOT HEIGHT DJ. 77-5048- NOT SHOWN 78-5048- 79-5048- FURN. WITH REMOVLE MOUNTING PLTE FURN. WITH 3/4-10 FLUSH STUD FURN. WITH 3/4-10 PROTRUDING STUD 3-1/2 (89mm) SQURE MTG PLTE HS (4) 5/1(8mm) DI. HOLES ON 2-5/8 (66mm) ENTERS 1/8 (3mm) 2-3/8 (60mm) HEVY-DUTY STINLESS STEEL 2 (51mm) O.D. EQUIPMENT LEGS for WELDED PPLITIONS STEPPED SHPE or STRIGHT SHPE with LRGE 2-3/8 (60mm) DI. FLRED TOP REF. MODEL NO. DESRIPTION FOOT HEIGHT DJ. 72-0811 STEPPED ROUND D 52-9907- STRIGHT 2-3/8 (60mm) 2-3/8 (60mm) THESE LEGS RE NOT VILLE WITH MOUNTING PLTES OR STUDS. 3/4 (19mm) DJ. DJ. DJ. REF. MTERIL: FINISH: TOE DJUSTMENT: STTI LOD RTING: REF. REF. REF. D SPEIFITIONS 2 (51mm) O.D. STINLESS STEEL TUING #4 FINISH LEGS RE IN HEIGHT ND PROVIDE DJUSTMENT 2000 lbs (900 kg) PER LEG 800-526-3694 11

Stainless Steel Equipment Legs HEVY-DUTY STINLESS STEEL EQUIPMENT LEGS THREDED STEEL STUD OR REMOVLE MOUNTING PLTE PROVIDED FOR ESY MOUNTING OF LEGS TO EQUIPMENT FOOT INSERTS RE SHPED TO PERMIT QUIK HEIGHT DJUSTMENT LL LEGS MY E FURNISHED TO MEET SPEIFI REQUIREMENTS WITH SPEIL STUDS ND/OR MOUNTING PLTE LEGS MY E FURNISHED PKGED IN SETS OF FOUR WITH USTOMER S PRT NUMER FOR KD SHIPPING D E F HEVY- DUTY STINLESS STEEL 2 (51mm) O.D. EQUIPMENT LEGS REF. model no. description height 84-5048- W/ REMOVLE MOUNTING PLTE 86-5048- W/ 3/4-10 PROTRUDING STUD 85-9706- W/ 5/8-11 PROTRUDING STUD ND NON-MRKING LK NYLOn FLNGED TOE 2 (51mm) HEVY- DUTY STINLESS STEEL (41mm) O.D. EQUIPMENT LEGS REF. model no. description height D E F 48-5032- 48-5048- 50-9704- 50-5032- 50-5048- W/ REMOVLE MOUNTING PLTE W/ REMOVLE MOUNTING PLTE W/ 1/2-13 PROTRUDING STUD & non-marking black nylon flanged toe W/ 1/2-13 PROTRUDING STUD W/ 1/2-13 PROTRUDING STUD 4 (102mm) 4 (102mm) 4 (102mm) 3-1/2 (89mm) SQURE 1/8 (3mm) 2 (51mm) 3/4 (19mm) 3/4 (19mm) MODEL NO. 48-5032- IS NSF LISTED S HEVY-DUTY PPLINE LEG. MODEL NO. 48-5048- IS NSF LISTED S HEVY-DUTY EQUIPMENT LEG. 1/8 (3mm) HEIGHT 3-1/2 (89mm) SQURE 3/4 (19mm) HEIGHT (41mm) 3/4 (19mm) 4 (102mm) (41mm) DJ. 3-1/2 (89mm) DJ. DJ. REF. REF. REF. REF. D REF. E REF. F 12 MOUNTING PLTES HVE (4) 5/1(8mm) DI. HOLES ON 2-5/8 (66mm) ENTERS. SPEIFITIONS MTERIL: (41mm) ND 2 (51mm) O.D. STINLESS STEEL TUING FINISH: #4 FINISH STTI LOD RTING: 2000 lbs (900 kg) PER LEG www.componenthardware.com

Stainless Steel Equipment Legs HEVY-DUTY STINLESS STEEL EQUIPMENT LEGS (41mm) and 2 (51mm) diameter models available in 4 (102mm) and heights SUPPLIED WITH 3-1/2 (89mm) Square Removable mounting plate lack Thermoplastic glide reduces scratching of countertops and provides a contemporary Look Satin finish to match equipment 2000 lb (900 kg) static load rating D HEVY- DUTY STINLESS STEEL (41mm) and 2 (51mm) O.D. EQUIPMENT LEGS REF. model no. description height O.D. 48-5032- W/ REMOVLE 3-1/2 square MOUNTING PLTE 48-5048- W/ REMOVLE 3-1/2 square MOUNTING PLTE 77-5048- W/ REMOVLE 3-1/2 square MOUNTING PLTE D 84-5048- W/ REMOVLE 3-1/2 square MOUNTING PLTE *See page 26 FOR MOUNTING PLTE DETILS 4 (102mm) (42mm) (42mm) 2 (51mm) 2 (51mm) REF. 1/8 (3mm) 3-1/2 (89mm) SQURE REF. 1/8 (3mm) 3-1/2 (89mm) SQURE REF. 1/8 (3mm) 3-1/2 (89mm) SQURE REF. D 1/8 (3mm) 3-1/2 (89mm) SQURE 4 (102mm) 3-1/4 (83mm) 5-1/4 (133mm) 5-1/4 (133mm) 800-526-3694 13

Stainless Steel Equipment Legs Feature Full 3 djustments HEVY-DUTY STINLESS STEEL EQUIPMENT LEGS THREDED STEEL STUD, WELDED OR REMOVLE MOUNTING PLTE PROVIDED FOR ESY MOUNTING OF LEGS TO EQUIPMENT LL LEGS MY E FURNISHED TO MEET SPEIFI REQUIREMENTS WITH SPEIL STUDS ND/OR MOUNTING PLTES LEGS MY E FURNISHED PKGED IN SETS OF FOUR WITH USTOMER S PRT NUMER FOR KD SHIPPING 3/4 (19mm) 3 (76mm) DJ. HEVY-DUTY STINLESS STEEL 2 (51mm) O.D. EQUIPMENT LEGS with FULL 3 (76mm) DJUSTMEnt NON-MRKING LK NYLON TOE available with... REMOVLE MOUNTING PLTE WELDED MOUNTING PLTE PROTRUDING STUD 3-1/2 (89mm) SQURE. DJ. 3 (78mm) DJ. 1/8 (3mm) MTG PLTE HS (4) 5/1(8mm) DI. HOLES ON 2-5/8 (66mm) ENTERS MODEL NO. DESRIPTION HEIGHT 92-8048- 93-8048- 95-8048- FURNISHED WITH WELDED MOUNTING PLTE FURNISHED WITH REMOVLE MOUNTING PLTE FURNISHED WITH 3/4-10 PROTRUDING STUD MTERIL: FINISH: TOE DJUSTMENT: STTI LOD RTING: SPEIFITIONS 2 (51mm) O.D. STINLESS STEEL TUING #4 STIN FINISH LEGS RE IN HEIGHT ND PROVIDE 3 (76mm) DJUSTMENT 2000 lbs (900 kg) PER LEG 14 www.componenthardware.com

Extra Wide Stainless Steel lad Equipment Legs 2-1/2 OD HEVY DUTY STINLESS STEEL EQUIPMENT LEGS Extra wide 2-1/2 (64mm) diameter provides a stable leg base vailable with a 3/4-10 flush or protruding stud Full 2-1/2 height adjustment stainless steel construction 2500 lbs static load capacity Satin finish Ideal for heavy ranges, ovens & food processing equipment REF. MODEL NO. DESRIPTION HEIGHT 67-5048- FURNISHED WITH 3/4-10 FLUSH STUD 68-5048- FURNISHED WITH 3/4-10 PROTRUDING STUD 44-X341- FURNISHED WITH 3-1/2 (89mm) SQURE REMOVLE MOUNTING PLTE SQ 3-1/2 (89mm) SQ 2-5/8 (67mm) 1/8 (3mm) 5 (127mm) 5/1 (8mm) DI. OPTIONL MOUNTING PLTE 2-1/2 (64mm) DJ. hrome Plated Equipment Leg Model No. 99-9906- 4.13 (105mm).09 (2.3mm) HROME PLTED STEEL ONSTRUTION Equipment Leg with 1 (25mm) djustable Height djustable Foot is Stainless Steel lad 2000 lb Static Load apacity Matches Industry Standard Specification 1 (25mm) DJ. 4.5 (114mm) 3/8 HOLE 3 PL EQ SP ON 3-3/8.. 800-526-3694 15

S/S One Piece Leg ssemblies With Full 3 djustment STINLESS STEEL LEG SSEMLIES (41mm) O.D. STINLESS STEEL LEG SSEMLIES FULL 3 DJUSTMENT FETURE FOR STNDRD PPLITIONs Economical... eliminates cutting, deburring, polishing and waste FULL 3 (76 mm) DJUSTMENT INDUSTRY STNDRD SIZES SHIPPED FROM STOK ESILY UT TO USTOM LENGTHS IN FRITOR S SHOP PERMITS KD SHIPMENT STNDRD PKGING 25 PER RTON LL LEGS MY E FURNISHED PKGED IN SETS OF FOUR. IDENTIFIED WITH USTOMER PRT NUMER S N OPTION FOR KD SHIPPING. MODELS WITH PLIN TOP DJUSTLE ROUND TOE MODEL NO. LEG DI. LENGTH TOE TYPE 46-6048- 46-6080- 46-6160- 46-6272- 46-6288- (41mm) (41mm) (41mm) (41mm) (41mm) 10 (254mm) 20 (508mm) 34 (864mm) 3 (914mm) ROUND ROUND ROUND ROUND ROUND MODELS WITH PLIN TOP ND 3-1/2 (89mm) DI. FLNGED TOE WITH 2 MOUNTING HOLES* MODEL NO. LEG DI. LENGTH TOE TYPE 46-4048- 46-4080- 46-4160- 46-4272- 46-4288- (41mm) (41mm) (41mm) (41mm) (41mm) 10 (254mm) 20 (508mm) 34 (864mm) 3 (914mm) 3-1/2 (89mm) DI. S/S FLNGE 3-1/2 (89mm) DI. S/S FLNGE 3-1/2 (89mm) DI. S/S FLNGE 3-1/2 (89mm) DI. S/S FLNGE 3-1/2 (89mm) DI. S/S FLNGE MTERIL: FINISH: TOE DJUSTMENT: STTI LOD RTING: *NOTE: FLNGED FOOT MODELS HVE 3-1/2 (89mm) O.D., 12 G (2.6mm) STINLESS STEEL FLNGE WITH #4 STIN FINISH, ND (2) 11/32 (9mm) DI. MTG. HOLES SPED 2-1/2 (64mm) O.. SPEIFITIONS (41mm) DI., 16 ga (1.5mm) STINLESS STEEL TUING #4 STIN FINISH 3 (76mm) MINIMUM 2000 lbs (900 kg) PER LEG 16 www.componenthardware.com

ustom Stainless Steel Leg ssemblies STINLESS STEEL (41mm) & 2 (51mm) O.D. LEG SSEMLIES FOR USTOM PPLITIONs LL LENGTHS FROM 4 (102mm) to 3 (914mm) HOOSE FROM RRY OF OPTIONL TOPS ND DJUSTLE TOES PERMITS KD SHIPMENT SPEIFITIONS MTERIL: 16 ga (1.5 mm) STINLESS STEEL TUING FINISH: #4 STIN FINISH TOE DJUSTMENT: (40mm) MINIMUM MOUNTING PLTES: 11 ga (3mm) PLTED STEEL, 3-1/2 (89mm) SQURE WITH (4) 5/1 (8mm) DI. HOLES SPED ON 2-5/8 (66mm) ENTERS STTI LOD RTING: 2,000 lbs PER LEG NON-STOK ITEMS... LL FOR LED TIME STNDRD PKGING...25 PER RTON LL LEGS MY E FURNISHED PKGED IN SETS OF FOUR, IDENTIFIED WITH USTOMER PRT NUMER, ET. LEG SSEMLIES FOR USTOM PPLITION ORDERING INFORMTION FOR (41mm) & 2 (51mm) O.D. LEG SSEMLIES FOR (41 mm) O.D. LEG SSEMLIES USE PREFIX...46 THRU 50 (SHOWN SHDED PURPLE ON HRT). FOR 2 (51 mm) O.D. LEG SSEMLIES USE PREFIX...52 THRU 56. USTOM LEG TOPS VILLE PLIN WELDED PLTE REMOVLE PLTE FLUSH 1/2-13 STUD PROTRUDING 1/2-13 STUD OPTIONL TOES VILLE FLNGED NO HOLES FLNGED WITH HOLES S/S/ S/S ROUND 46-3 47-3 48-3 49-3 50-3 52-3 53-3 54-3 55-3 56-3 46-4 47-4 48-4 49-4 50-4 52-4 53-4 54-4 55-4 56-4 46-5 47-5 48-5 49-5 50-5 52-5 53-5 54-5 55-5 56-5 46-6 47-6 48-6 49-6 50-6 ROUND FOOT INSERTS NOT VILLE FOR 2 (51mm) DI. LEG SSEMLIES TO ORDER: SIMPLY SPEIFY LEG TOP ND DJUSTLE TOE DESIRED TOGETHER WITH THE LENGTH IN INHES REQUIRED. EXMPLE: (41mm) O.D. WITH PLIN TOP...SPEIFY 46 NYLON TIP...SPEIFY -2 24 (610mm) LENGTH...SPEIFY 24 (610mm). THE PRT NUMERS IN THE HRT PROVIDE LNKS TO OMMODTE NY LENGTH OF LEG ETWEEN 4 (102mm) ND 3 (914mm) IN 1/8 (3mm) INREMENTS. OMPONENT HRDWRE WILL USE THESE LNKS TO ONVERT YOUR INDIVIDUL DESIGN ND LENGTH REQUIREMENT INTO ITS OWN PRT NUMER. 800-526-3694 17

ORDER FORM-USTOM STINLESS STEEL H-FRME SSEMLY H46 SERIES USTOM STINLESS STEEL H-FRME SSEMLY L 16 GUGE STINLESS STEEL O.D. UPRIGHTS WITH O.D. ROSS MEMER OMPLETELY WELDED ND POLISHED STIN FINISH EONOMIL ONVENIENT WIDE RRY OF POP-IN DJUSTLE FOOT INSERTS VILLE PKED TWO/RTON FOR ESY KD SHIPMENT NON-STOK (90-120 DYS DELIVERY) QUNTITY ORDERS ONLY MUST SPEIFY DIMENSIONS,, WHEN ORDERING OD (41mm) OD TOE OPTIONS STINLESS STEEL 10-0851- STINLESS STEEL ROUND 10-0852- PLSTI (LK) 10-0831- PLSTI (GRY) 10-0841- METL DIE ST 10-0811- S/S 3 DJUSTLE 10-0881- L STINLESS STEEL FLNGED (NO HOLES) 10-0853- L STINLESS STEEL FLNGED (WITH HOLES) 10-0854- 3 DJUSTLE 10-0884- To Order: ompany Name ontact Person ddress Purchase Order No. Phone/email QTY -DIM -DIM -DIM DJ. FOOT *Please indicate none if no feet are required Return completed information to HG, or contact us. 18 1890 Swarthmore venue Lakewood NJ 08701 Tel. 800-526-3694 732-363-4700 Fax 732-364-8110 www.componenthardware.com

ppliance Legs REF. 2-3/8 (60mm) LUMINUM PPLINE LEGS 3/4 (19mm) LUMINUM DIE ST ONSTRUTION PROVIDES OUTSTNDING PERFORMNE T N FFORDLE PRIE VILLE FOR EQUIPMENT LEG ND 4 PPLINE LEG PPLITIONS 1 (25mm) DJ. POWDER OTED FINISH PROVIDES DURLE, HIP RESISTNT FINISH. SPEIL OLORS VILLE ON QUNTITY ORDERS. REF. 3/8-16 THD 3/8 (9mm) REF. MODEL NO. FINISH TYPE HEIGHT DJ. LOD RTING LS/FOOT(KG/mm) THRED 4 (102mm) 61-4002- NIKEL 62-5002- NIKEL S/S 1 (25mm) 1 (25mm) 2000 lbs (900 kg) 2000 lbs (900 kg) 1/2-13 PROTRUDING 5/8-11 PROTRUDING E60-1653 NIKEL FLNGE 4 (102mm) 1 (25mm) 2000 lbs (900 kg) 3/8-16 PROTRUDING PROVIDED WITH DI. FLNGED FOOT 1 (25mm) adj. HEVY DUTY S/S PPLINE LEG Model No. 99-9940- 4 (102mm) high 1/2 (51mm) dia. flange with plastic glide ontemporary design Ideal for coffee machines and beverage dispensers Satin finish SKID RESISTNT appline LEG IDEL FOR EVERGE DISPENSERS ND OTHER LRGE OUNTERTOP PPLINES 4 (102mm) high lack thermoplastic FINISH Static load capacity 200 LS Specially engineered slip resistant black rubber flanged toe compresses the rubber flange under load to minimize leg slippage on various work surfaces PTENT PENDING Model No. 60-0633-R 3/8-16 THD 5/8 (16mm) 4 (102mm) ( 38mm ) DJ. 800-526-3694 19

ppliance Legs D E F G H PPLINE LEGS 4 (102mm) HIGH PPLINE LEGS THERMOPLSTI LK, GRY or HROME PLTED STTI LOD PITY 200 lbs REF. MODEL NO. FINISH FOOT TYPE 60-0631 LK 60-0641 GRY 60-0623 HROME FLNGE D 60-0633 LK FLNGE 4 (102mm) HIGH PPLINE LEGS DIE ST METL with STIN NIKEL FINISH STTI LOD PITY 250 lbs REF. MODEL NO. FINISH FOOT TYPE E 60-1651 F 60-1653 STIN NIKEL STIN NIKEL FLNGE LEG TYPE * 60-16XX SERIES 60-06XX SERIES 1-7/1 (37mm) *across hex corners 3/8 (9mm) 5/8 (16mm) 2-1/2 (63mm) HIGH PPLINE LEGS THERMOPLSTI LK or GRY STTI LOD PITY 200 lbs REF. MODEL NO. FINISH FOOT TYPE THD THD G 60-0431 LK H 60-0441 GRY 4 (102mm) 1 DJ. (25mm) 4 (102mm) 1 DJ. (25mm) 3/8-16 THD 2-1/2 (63mm) 1 DJ. (25mm) DIMENSION IS 1-7/1(37mm) ROSS ORNERS. DIMENSION IS 5/8 (16mm). PROTRUDING STUDS HVE 3/8-16 THREDS 20 OPTIONL NON-SKID PDS VILLE: FOR 60 SERIES TOE...SPEIFY MODEL NO. 60-X003... FOR 60 SERIES FLNGED TOE...SPEIFY MODEL NO. 60-X001 www.componenthardware.com

ppliance Legs D E PPLINE LEGS F 1 (25mm) HIGH THERMOPLSTI PPLINE LEGS STTI LOD PITY 100 lbs REF. MODEL NO. FINISH FOOT TYPE 60-2205 LK ROUND 60-2210* GRY ROUND 60-2305 HROME ROUND D 60-2405 HROME *ROSS ORNERS *7/8 (22mm) *FURNISHED WITH 3/8-16 1/2 (13mm) 1 (25mm) 1/2 DJ (13mm) LK RUER FLNGE 1/4-20 THD 1/2 DI. (13mm) REF. E REF. F 1 (25mm) HIGH ZMK PPLINE LEG HET RESISTNT STTI LOD PITY 200 lbs MODEL NO. FINISH FOOT TYPE 60-2105 HROME ROUND THRED ONVERTER ESILY SREWS ON EXISTING PPLINE LEG TO ONVERT 1/4-20 PROTRUDING STUD THRED TO 3/8-16 THRED MODEL NO. 60-1438 5/8 (16mm) 2-1/2 (63mm) 1 (25mm) adj. PROVIDED WITH DI. FLNGED FOOT 2-1/2 (63mm) HIGH EONOMY SERIES PPLINE LEGS DIE ST ZMK with NIKEL PLTED POLISHED FINISH FLNGE FOOT 2000 lbs (900 kg) STTI LOD PITY PER LEG MODEL NO. E60-1453 OPTIONL NON-SKID FOOT PDS VILLE SPEIFY...E60-X010 FOR GREY SILIONE 4 (102mm) HIGH EONOMY SERIES PPLINE LEGS DIE ST ZMK with NIKEL PLTED MTTE FINISH FLNGE FOOT 2000 lbs (900 kg) STTI LOD PITY PER LEG MODEL NO. E60-1653 3/8-16 THD PROVIDED WITH DI. FLNGED FOOT 3/8 (9mm) 4 (102mm) 1 (25mm) adj. 800-526-3694 21

ppliance Legs 4 (102mm) HIGH EQUIPMENT LEG NIKEL PLTED ZMK DJUSTMENT 1/2-13 x 1/2 MOUNTING STUD TOE FOR ESY FIELD DJUSTMENT STIN FINISH STTI LOD PITY 2000 lbs MODEL NO. FINISH FOOT TYPE E41-4002- STIN NIKEL 1-45/64 (43mm) 3-1/4 (83mm) 4 (102mm) DJ 4 (102mm) HIGH HEVY DUTY PPLINE LEGS DESIGNED FOR LRGE OUNTERTOP PPLINES DIE ST ZMK DJUSTLE FLNGE FOOT OPTIONL NON-SKID FOOT PDS VILLE ROUGH, RUGGED THERMOPLSTI ODY WITH STEEL STUD WRENH FLTS FOR ESY INSTLLTION ND DJUSTMENT HOIE OF LK OR NIKEL PLTED MTTE FINISHES 2000 lbs (900 kg) STTI LOD PITY PER LEG 1/2 (13mm) 2 (51mm) 4 (102mm) adj. PROVIDED WITH 2 (51mm) DI. FLNGED FOOT MODEL NO. MOUNTING STUD DESRIPTION 70-1000 1/2-13 PROTRUDING 70-1010 1/2-13 FLUSH 70-1020 3/8-16 PROTRUDING 70-1010-M M12 FLUSH 70-2000 1/2-13 PROTRUDING 70-2010 1/2-13 FLUSH 70-2020 3/8-16 PROTRUDING 70-2000-M 70-2010-M M12 PROTRUDING M12 FLUSH 71-1020 3/8-16 PROTRUDING MTTE LK THERMOPLSTI ODY with MTTE NIKEL PLTED ZMK FLNGED FOOT MTTE NIKEL PLTED THERMOPLSTI ODY with MTTE NIKEL PLTED ZMK FLNGED FOOT hi-temp thermoplastic rated to 300 f constant, 350 f intermittent NOTE: optional non-skid neoprene foot pads available... specify MODEL no. a70-x011 when ordering 22 www.componenthardware.com

ccessories ROSS RE FITTINGS FOR O.D. LEGS and (41mm) O.D. LEGS Designed to mate and (41mm) O.D. vertical legs with O.D. horizontal cross rails. These die cast aluminum ROSS RE FITTINGS eliminate notching, welding and polishing. Ideal for knock-down shipping. END ROSS RE FITTING MODEL NO. 35-2020 TO SUIT VERTIL LEGS MODEL NO. 35-1020 TO SUIT (41mm) VERTIL LEGS OR (41mm) 3 (76mm) 1 (25mm) typical QUIK ORNER RKETS FOR DJUSTLE UNDERSHELVES FOR O.D. LEGS and (41mm) O.D. LEGS QUIK ORNER RKETS are pre-finished die cast aluminum components. They are easily fastened to pre-notched sheet metal undershelves to provide strong, secure, rigid undershelf support assemblies. djusting screws are provided for setting the undershelf to any desired height. Welding, grinding and polishing is eliminated and knock-down shipping is facilitated. orner and center brackets are designed for either or (41mm), O.D. tubing. Notching diagrams are provided with installation instructions. 2-5/8 (66mm) ORNER ROSS RE FITTING MODEL NO. 35-2010 TO SUIT VERTIL LEGS MODEL NO. 35-1010 TO SUIT (41mm) VERTIL LEGS OR (41mm) 3 (76mm) 3 (76mm) typical 1 (25mm) typical 2-5/8 (66mm) ORNER RKET MODEL NO. 37-2010 to suit MODEL NO. 37-1010 to suit (41mm) ENTER ROSS RE FITTING MODEL NO. 35-2030 TO SUIT VERTIL LEGS MODEL NO. 35-1030 TO SUIT (41mm) VERTIL LEGS OR (41mm) 3 (76mm) 4 (102mm) typical 1 (25mm) typical 2-5/8 (66mm) 4-3/4 (120mm) ENTER RKET MODEL NO. 37-2020 to suit MODEL NO. 37-1020 to suit (41mm) NSF STNDRDS GOVERNING THE USE OF SET SREWS IN NON-FOOD ZONES REQUIRES THE PLUGGING OF THE SOKET HOLE FTER FINL SSEMLY ND TIGHTENING. THIS MY E OMPLISHED Y PPLYING HRDENING TYPE SILIONE SELNT OR THE USE OF HOLE PLUG. STNDRD NSF TYPE PUSH-IN PLSTI HOLE PLUGS RE VILLE...SPEIFY 10-0020 WHEN ORDERING, SEE PGE 24. 800-526-3694 23

ccessories REMOVLE MOUNTING PLTES 11 ga (3mm) ZIN PLTED STEEL SQURE MOUNTING PLTES 3-1/2 x 3-1/2 (89mm x 89mm) MODEL NO. 44-X301- (1/2-13 TH D) MODEL NO. 44-X309- (5/8-11 TH D) MODEL NO. 44-X341- (3/4-10 TH D) RETNGULR MOUNTING PLTES 2-1/2 x 3-5/8 (63mm x 92mm) MODEL NO. 44-X327- REMOVLE/ONELED UNDERSHELF RKETS NIKEL PLTED STEEL FITS O.D. TUING 1/2 (13mm) ORNER RKET MODEL NO. 34-1010 ENTER RKET MODEL NO. 34-1012 (31mm) UNDERSIDE VIEW RKETS PROVIDED WITH 5/1 (8mm) DI. HOLE SET SREW HOLE PLUGS MODEL NO. 10-0020 TO OMPLY WITH NSF REQUIREMENTS... LL SET SREW SOKET OPENINGS MUST E PLUGGED FTER FINL SSEMLY ND TIGHTENING 1/2 (13mm) 3 (76mm) (31mm) FOR 5/1 SET SREWS MODEL NO. 60-2724 2-5/8 (66mm) THD 2-5/8 (66mm) FURNISHED WITH (4) 5/1 (8mm) DI. MOUNTING HOLES 1/2-13 THD 2-13/1 (71mm) FURNISHED WITH (4) 11/32 (9mm) SLOTTED MOUNTING HOLES KIK PLTE SPRING LMP model no. a76-4460 FITS ON PIPE, (41mm) and 2 (51mm) O.D. TUING ZIN PLTED STEEL 1 (25mm) DJUSTLE FOOT LEVELERS RUER USHIONED 5/16-18 THD 1-1/8 (28mm) 2-1/2 (63mm) NON-SKID NON-MRKING 7/1 (11mm) 1-9/1 (40mm) 1/2-13 THD MODEL NO. 60-4444 5/8 (16mm) 24 www.componenthardware.com

MODEL NO. PGE NO. MODEL NO. PGE NO. MODEL NO. PGE NO. MODEL NO. PGE NO. MODEL NO. PGE NO. Index 10-0010- 3, 4, 5 10-0020 24 10-0221- 3 10-0421- 3 10-0611- 3 10-0631- 3 10-0641- 3 10-0651- 3 10-0654- 7 10-0811- 3, 18 10-0831- 3, 18 10-0841- 3, 18 10-0851- 3, 18 10-0852- 3, 18 10-0852-S 4 10-0853- 7, 18 10-0854- 7, 18 10-0881- 5, 18 10-0884- 5, 18 10-1000 4 10-1500 4 10-9904- 7 11-0851- 3 11-0854- 7 14-0221- 6 14-0224- 7 14-0411- 6 14-0421- 6 14-0424- 7 14-0611- 6 14-0651- 6 14-0653- 7 14-0654- 7 15-0851- 6 15-0854- 7 16-0206- 2 18-0202- 2 18-0203- 2 18-0206- 2 18-0402- 2 18-0406- 2 18-9900- 2 19-1000 1 20-0206- 2 20-0406- 2 24-0206- 1 24-0207- 1 26-0207- 1 28-0207- 1 34-1010 24 34-1012 24 35-1010 23 35-1020 23 35-1030 23 35-2010 23 35-2020 23 35-2030 23 37-1010 23 37-1020 23 37-2010 23 37-2020 23 44-X301-24 44-X309-24 44-X327-24 44-X341-15, 24 46-4048- 16 46-4080- 16 46-4160- 16 46-4272- 16 46-4288- 16 46-6048- 16 46-6080- 16 46-6160- 16 46-6272- 16 46-6288- 16 47-9932- 8 48-5032- 12 48-5048- 12 50-5032- 12 50-5048- 12 50-9704- 12 50-9939- 8 52-9907- 11 60-0431 20 60-0441 20 60-0623 20 60-0631 20 60-0633 20 60-0633-R 19 60-0641 20 60-1438 21 60-1651 20 60-1653 20 60-2105 21 60-2205 21 60-2210 21 60-2305 21 60-2405 21 60-2724 24 60-4444 24 67-5048- 15 68-5048- 15 70-1000 22 70-1010 22 70-1020 22 70-1010-M 22 70-2000 22 70-2010 22 70-2020 22 70-2000-M 22 70-2010-M 22 71-1020 22 72-0811 11 76-4460 24 77-5048- 11 78-5048- 11 79-5048- 11 84-5048- 12 85-9706- 12 86-5048- 12 88-9902- 8 90-9902- 8 92-8048- 14 93-8048- 14 95-8048- 14 99-9906- 15 99-9940- 19 61-4002- 19 62-5002- 19 E60-1653 19 48-5032- 13 48-5048- 13 77-5048- 13 84-5048- 13 E41-4002- 22 E60-1453 21 E60-1653 E61-2003- E61-2104- E61-4002- E61-5002- E62-2104- E62-4002- E62-5002- E63-2003- E63-2104- E63-4002- E63-5002- P61-4003- P62-4003- P63-2003- P63-4003- P64-4003- 21 10 10 10 10 10 10 10 10 10 10 10 9 9 9 9 9 800-526-3694 25

1890 Swarthmore venue PO ox 2020 Lakewood NJ 08701 Tel. 800-526-3694 732-363-4700 Fax 732-364-8110 www.componenthardware.com