5PT10 / 5PT lb and 2000 lb Capacity Portable Davit Cranes SERIES

Transcription

1 5PT0 / 5PT0 SERIES Like a favorite tool in your toolbox, Thern oander Series portable davit cranes are ideal for many applications. Their sturdy design makes them both affordable and easy-to-use. 00 lb and 000 lb apacity Portable Davit ranes Portable Rugged and affordable Quick-Mount Winch racket Roller earing for Easy 60 Rotation Manual or Power Winch Operation Five orrosion-resistant Finishes Model 5PT0-M ase 5P0 Easy, No-Tools ssembly/disassembly Variety of ases -Year Warranty Made in the US HND / POWER / HYDRULI / IR WINHES DVIT RNES Winona, MN US

2 OMMNDER SERIES NEW FETURES LEVIS PIN The sheave clevis pin is now D-Shaped to prevent the clevis pin from roating when under light loads. QUIK-MOUNT WINH RKET variety of Thern winches can be attached to the bracket. fter a winch is attached to the bracket, the bracket is easily mounted (without tools) to the crane via quickconnect pins. 000 SERIES 5PT0 PITY 00 L 544 KG UXILIRY TTHMENT HOLE llows for various load attachments or two part line configurations. oom 4 lb / 5.4 kg oom Extension lb / 0.4 kg MST P cap (not visible) on top of the mast helps keep weather and debris out of the mast. ROTTION HNDLE The new rotation handle position does not interfere with the operation of the boom angle adjustment screw jack. SE EXTENSION The optional base extension is ideal for use with the flush mount or wall mount base options to maintain crane for obstacle clearance or when additional 5 is required. SE P ase cap with lanyard, keeps water and debris out when crane is removed. ROLLER/LL ERING Optional on the oander Series Davits, the specially designed roller/ball bearing at top of base requires no tools for installation. The roller/ball bearing allows smooth and easy 60 crane rotation under load. STINLESS STEEL LOK Stainless steel lock assembly keeps crane in position during winch operation and when not in use. Included with roller/ball bearing. Screw-jack lb / 5.5 kg Rotation Handle 7 lb /. kg Mast 6 lb / 6. kg Pedestal ase 5 lb /.6 kg earing 9 lb / 4. kg (5PT0RG) lb / 5.0 kg (5PT0RG) racket 4 lb /.8 kg Model Shown 5PT0-M ase 5P0 ase Extension 4 lb / 5.4 kg (5E0-5) 5 lb / 4.0 kg (5E0-5) Thern products are not for lifting people or things over people.

3 FETURES ND ENEFITS SERIES 5PT0 PITY 000 L 907 KG oom 7 lb /. kg 000 oom Extension 46 lb / 0.9 kg TRDITIONL FETURES MNUL OR POWER OPERTION Thern davit cranes can be configured with a manual winch for short, infrequent lifts or a power winch for longer lifts or heavier loads. hoose from Thern s spur or worm gear hand winches or power winches with 5//60V as well as pneumatic, hydraulic or D Volt power operation. ESY DJUSTLE OOM oom extends to four positions with quickrelease pin and adjusts angle with ratchet. ORROSION RESISTNT FINISH Electrostatic powder coated crane and stainless steel fasteners combine to resist corrosion in harsh environments. Other options available include: galvanized, stainless steel and epoxy finishes. Screw-jack lb / 5.5 kg Rotation Handle 7 lb /. kg Mast 67 lb / 0.4 kg Pedestal ase 67 lb / 0.4 kg Swaged all Fitting ESY SSEMLY/DISSSEMLY Quick-release clevis style stainless steel pins allow for easy assembly and quick disassembly for transport or storage. No tools required. QUIK DISONNET NHOR For quickly attaching or removing wire rope equipped with a swaged ball fitting - llows the operator to leave the wire rope attached to the load at all times and simply remove the rope from the winch and attach to the optional wire rope keeper or cable reel. Model Shown 5PT0-E ase 5P0 Keeper able Reel VRIETY OF SES Pedestal, flush and wall mount bases allow for a variety of mounting solutions and are easily installed to a variety of solid surfaces with anchor bolts or other fastening methods. ases sold separately. ase cap included with lanyard keeps water and debris out of base when crane is removed. Pedestal Flush Mount Wall Mount Wheel ase -YER WRRNTY Industry-leading two-year limited warranty on all our products.

4 RNES ND WINHES FINISHES rane Finishes for oander Series SERIES ll cranes come standard with Electrostatic Powder oat red finish. Four optional finishes also offered are Galvanized, 04 or 6 Stainless Steel, and corrosion-resistant Epoxy. ustom colors are available per customer request - Please contact factory. RED GL 04 SS 6 SS EPX Finish ode Model Number MDR 000 MDR 000 Options Description Powder oat (Red) RED 5PT0 5PT0 Standard N/ Red electrostatic powder coating applied to all cranes - Good Galvanized GL 5PT0G 5PT0G Optional/Extra n economical choice that provides extra protection - etter 04 Stainless Steel 04SS 5PT0S 5PT0S Optional/Extra Electro-polished for added protection - est 6 Stainless Steel 6SS 5PT0S6 5PT0S6 Optional/Extra higher level of corrosion protection - Premium Epoxy (Gray) EPX 5PT0X 5PT0X Optional/Extra -part epoxy is impact, fire, water, and slip-resistant - Premium WINHES For oander Series M M MX M Hand Winches Winch Winch Model No. Description Finish pprox. Ship Weight M M4P-K Spur gear hand winch with brake Zinc Plated 8 lbs.7 kg M 4WM-K Worm gear hand winch with brake Red Enamel 4 lbs 9. kg MX 4WMEGR-K Worm gear hand winch with brake Epoxy Paint (Gray) 4 lbs 9. kg M M4PSS-K Stainless steel spur gear hand winch with brake Stainless Steel 8 lbs.7 kg ll hand winches include disc brake for load control and steel gear covers to protect gears and help prevent injuries. NOTE: Worm gear requires more turns with less effort than a spur gear winch. Electric Winches EX Electric Winch Model No. Line Speed st Layer Full Drum Finish Power ontrol (Pendant) pprox. Ship Weight E E 4WP-K 8 fpm fpm Enamel Paint 5 Volt,, Single Phase 6 ft 85 lbs 9 kg EX 4WPEGR-K 8 fpm fpm Epoxy Paint 5 Volt,, Single Phase 6 ft 85 lbs 9 kg E4 E4X E K fpm fpm Enamel Paint 5 Volt, Single Phase 6 ft 0 lbs 50 kg E4X 4777EGR-K fpm fpm E4D 4777D-K fpm fpm Epoxy Paint Enamel Paint 5 Volt, Single Phase 6 ft 0 lbs 50 kg Volt, D 0 ft 05 lbs 48 kg E4D E4XD E4XD 4777DEGR-K fpm fpm Epoxy Paint Volt, D 0 ft 05 lbs 48 kg ll electric winches mount on boom via quick mount bracket and are equipped with internal break for load control.

5 SES ND WIRE ROPE SES (sold separately) For oander Series SERIES Select the appropriate base(s) for your application from the chart below. Matching your crane with multiple bases provides optimal worksite flexibility and an economical solution for servicing multiple lift stations. Wheel ase Pedestal Flush Wall Mount Finish Pedestal Flush Wall Wheel Extension* 5PT0 5PT0 5PT0 5PT0 5PT0 5PT0 5PT0 5PT0 5PT0 5PT0 Powder oat Paint 5P0 5P0 5F0 5F0 5W0 5W0 5R0 5R0 5E0-5 5E0-5 Galvanized 5P0G 5P0G 5F0G 5F0G 5W0G 5W0G 5E0-5G 5E0-5G 04 Stainless Steel 5P0S 5P0S 5F0S 5F0S 5W0S 5W0S 5E0-5S 5E0-5S 6 Stainless Steel 5P0S6 5P0S6 5F0S6 5F0S6 5W0S6 5W0S6 5E0-5S6 5E0-5S6 Epoxy Paint 5P0X 5P0X 5F0X 5F0X 5W0X 5W0X 5R0X 5R0X 5E0-5X 5E0-5X pproximate Ship Weight 56 lbs (5.4 kg) 7 lbs (. kg) 47 lbs (. kg) 6 lbs (8. kg) 5 lbs (.6 kg) 7 lbs (.7) 8 lbs (08.0) kg 5 lbs (59.) kg. lbs (4.9) kg 5 lbs (4.0) kg *Ideal for use with flush or wall mount bases to retain crane mast. (Use with other bases where additional is needed.) GL SS WIRE ROPE ssembly (sold separately) For oander Series Length Ratings* Galvanized ircraft able 04 Stainless Steel Rope 6 Stainless Steel Rope /6" Dia /4 Dia. /6" Dia. /4 Dia. /6" Dia. /4 Dia. 00 lbs () () 000 lbs (454 kg) 800 lbs (86 kg) 800 lbs (6 kg) 400 lbs (65 kg) 0 ft - 6 m W9-0NS W5-0NS WS9-0NS WS5-0NS WSS9-0NS WSS5-0NS 8 ft m W9-8NS W5-8NS WS9-8NS WS5-8NS WSS9-8NS WSS5-8NS 6 ft m W9-6NS W5-6NS WS9-6NS WS5-6NS WSS9-6NS WSS5-6NS 45 ft -.7 m W9-45NS W5-45NS WS9-45NS WS5-45NS WSS9-45NS WSS5-45NS 60 ft - 8. m W9-60NS W5-60NS WS9-60NS WS5-60NS WSS9-60NS WSS5-60NS 75 ft -.8 m W9-75NS W5-75NS WS9-75NS WS5-75NS WSS9-75NS WSS5-75NS 90 ft m W9-90NS - WS9-90NS - WSS9-90NS - Thern winches and cranes are sold without wire rope. However, we carry top quality wire rope assemblies optimally designed for use with our winches and cranes. The assemblies above are equipped with a swaged ball fitting and swivel (Enamel w/galvanized rope or Stainless Steel with SS rope) *ased on.5: design factor NOTE: /8" wire rope is available with a reduced load rating. Please contact the factory.

6 PERFORMNE oander 000 Lift elow Floor Level Lift elow Floor Diameteter M M Length Winch onfigurations Minimum (4) Maximum () M M M E E4 (ft) (m) (ft) (m) (in) () (ft) (m) / x - x - x / x - x - x / x - x - x / x - x - x / x - x - x / x - x - x / x - x - x For long lifts (Up to 40 ) please contact factory / x x x x x / x x x x x / x x x x x / x x x x x / x x x x x / x - x x / x - x - x / x - x - x / x - x - x / x / x Lift below floor level varies depending on boom position and base configuration. For long lifts (Up to 40 ft), please contact factory. Performance haracteristics are for standard products referred to in this manual. Non-standard products may vary from the original design. ontact Thern, Inc. for this information. Wire rope assemblies include a hood and a swaged ball fitting to work with quick disconnect anchor on winches and 6SS wire rope is also available. Please contact the factory. oander 000 Performance Ratings oom Load Rating Position / Range (lb) (kg) IMPORTNT: Thern products are not for lifting people or things over people. M It is the owner or operator s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. e sure to read the Owner s Manual supplied with the equipment before operating it. E E4 000 lift below floor level 4 (0 to 40 )

7 48 00 in lbs 00 lbs oander 000 On Pedestal ase Upright Reach & Height bove Floor 4 oom Position Hook 000 lbsreach Hook lbs Height.5 in. DI kg 6 kg 49 kg 60 (in) () (in) () in MST in sch 40 pipe 4.5 in 5.88 in in in Dimensions are for reference only and subject to change without notice. PERFORMNE 00 in in. DI lbs 00 lbs 000 lbs 45 kg 800 lbs 6 kg lbs 49 kg X.69 in [7 ] hole dia oander 000 on 86 in Flush or 84 Wall-Mount ase Reach & Height bove Floor.8 in 0 oander 000 Pedestal ase 5P0 5P0 5P0S 5P0X 750 lbs 5P0G 5P0S6 RNGE 86 in 84 oom Position Hook Reach Hook Height 4 (in) () (in) 000 lbs 800 lbs () 45 kg 6.5 in. DI.5 kgin. 94 DIkg in 48 7 in MST Dimensions are for reference only and subject to change without notice. oander 000 Flush ase 5F0 5F0 5F0G 5F0S 5F0S6 5F0X.8 in in 7 00 lbs 4.5 in sch 40 pipe 4.5 in 5.88 in X.69 in [7 ] hole dia 54 RNGE.8 in lbs 49 kg 86 in in 84 MST lbs lbs lbs 45 kg 05.8 in 4.5 in sch 40 pipe in 4.5 in in X.69 in [7 ] hole dia 800 lbs 6 kg 9.5 in. DI 89 MST RNGE.5 in. DI in sch 409 pipe 650 lbs 750 lbs 4.5 in kg in lbs lbs lbs 4X in [7 kg ] 950 hole lbs dia 550 lbs 40 kgin 49 kg 00 lbs MST 05 RNGE in 0 MST oander 4.5 in sch 40 pipe 000 Wall-Mount ase 5W0 5W0 5W0G 4X.69 [7 ] dia hole 5W0S 5W0S6 4.6 in 4.5 in 5.88 in 7 5W0X in reach in in sch 40 pipe 4X.69 [7 ] dia hole 4.5 in sch 40 pipe 4.5 in in in 5.88 in X.69 in [7 ] hole dia 9 54 RNGE RNGE 9.57 in in in RNGE 000 lbs 45 kg lbs 550 lbs 6 kg 49 kg 4 RNGE.8 in lbs 800 lbs 550 lbs kg in6 60 kgin94 7 kgin49 84 kgin in in sch 40 pipe IMPORTNT: It is the owner or operator s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. e sure to read the Owner s.8 Manual in 4X.69 [7 ] dia hole supplied with the equipment before operating it in in 5.88 in 68 40

8 750 lbs 00 lbs oander 000 on Wheel ase 000 lbs 45 kg 800 lbs 6 kg 550 lbs 49 kg 06 in 69 LUE PERFORMNE RNGE.5 in. DI in 69 MST 00 lbs GREEN RNGE 440 in kg LUE RNGE 00 lbs 750 lbs 000 lbs 45 kg 800 lbs 550 lbs 6 kg 49 kg in } IMPORTNT: rane DOES NOT rotate when assembled in 5R wheel base. oander 000 Wheel ase Reach & Height bove 750 lbs Floor oom Position Hook Reach Hook Height 00 lbs (in) () (in) () lbs lbs 9 45 kg kg 550 lbs 49 kg 7.5 in in 50.5 in 64 in dia.5 in. DI in 54.5 in 64 MST 06 in in in in lbs 45 kg 4.75 in 5.75 in lbs 6 kg 6 in dia lbs 49 kg 8 in 4.75 in 060 in lbs 4 0 in 750 lbs lbs in lbs.5 in. DI 89 MST GREEN RNGE LUE RNGE 7.5 in 4 in 44.5 in 5 in 69 8 in lbs 800 lbs 550 lbs 0 in kg 6 kg 49 kg 0 in in 4 in 44.5 in 5 in h oander 000 Wheel ase Load Ratings oom Position Leg Pos Leg Pos Leg Pos Leg Pos 4 (lb) (kg) (lb) (kg) (lb) (kg) (lb) (kg) /- /- SEE LOD RTINGS ON RNE /- DO NOT USE /-4 DO NOT USE Dimensions are for reference only and subject to change without notice. 7.5 in in in 467 in dia 76.5 in 64 4 in in 6 in dia 5 8 in 0 0 in in 76 IMPORTNT: It is the owner or operator s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. e sure to read the Owner s Manual supplied with the equipment before operating 5.75 init in 4 in 44.5 in 5 in m

9 oander 000 5PT0 Lift elow Floor Level Lift elow Floor Diameteter Length Winch onfigurations Minimum (4) Maximum () M M M E E4 (ft) (m) (ft) (m) (in) () (ft) (m) / x - x - x / x - x - x / x - x - 4 x / x - x - x / x - x - x / x - x - x / x - x - x / x x x x x / x x x x x / x x x x x / x x x x x / x x x lift below xfloor level x / x - x x For long lifts (Up to 50 ) please contact factory / x - x - x / x - x - x / x - x - x / x - x - x / x Lift below floor level varies depending on boom position and base configuration. For long lifts (up to 50 ) please contact factory. Performance haracteristics are for standard products referred to in this manual. Non-standard products may vary from the original design. ontact Thern, Inc. for this information. Wire rope assemblies include a hood and a swaged ball fitting to work with quick disconnect anchor on winches and 6SS wire rope is also available. Please contact the factory. oander 000 5PT0 Performance Ratings oom Position / Range st Layer Load Rating IMPORTNT: Mid-Drum Load Rating M Full Drum Load Rating (lb) (kg) (lb) (kg) (lb) (kg) M PERFORMNE Thern products are not for lifting people or things over people. M E4 000 oander 000 5PT0 Ratings with -Part Line Kit oom Position st Layer Load Rating Mid-Drum Load Rating 4 It is the owner or operator s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. e sure to read the Owner s Manual supplied with the equipment before operating it. E floor level (reference) lift below base level Full Drum Load Rating (lb) (kg) (lb) (kg) (lb) (kg) two part line 4 lift below floor level (0 to 50 )

10 in. DI 4 00 lbs 589 kg 500 lbs 680 kg 900 lbs 86 kg oander 000 On Pedestal ase 54 Upright Reach & Height bove Floor oom Position 9 Hook Reach Hook Height 000 (in) lbs 600 () lbs 00 lbs 00 (in) lbs () kg 589 kg 498 kg in in 84 7in MST Dimensions are for reference only and subject to change without notice. 5 in sch 40 pipe 4.5 in 5.88 in RNGE RNGE.57 in in PERFORMNE 4.5 in. DI 4 00 lbs 589 kg 500 lbs 680 kg 900 lbs 86 kg 600 lbs 75 kg RNGE 000 RNGE 00 lbs 00 lbs 589 kg 498 kg 0 in in 0 in 4X.69 in [7 ] hole dia oander 000 Pedestal ase 5P0 in in 5P0 5P0S 5P0EGR lbs 5P0G 5P0S6 589 kg MST 500 lbs kg 0 in RNGE 900 lbs kg 4 0 in lbs 589 kg 74 RNGE 500 lbs 00 lbs in sch 40 kg 680 pipe kg.57 in 500 lbs kg RNGE 900 lbs 5 98 in 86 kg 9 4 oom Position Hook Reach Hook Height RNGE 900 lbs kg lbs in 5.88 in 4.8 in (in) () (in) () RNGE 60 RNGE 54.5 in X lbs in lbs [700 ] lbshole dia 75 kg 589 kg 498 kg 98 in in. DI in lbs 00 lbs 00 lbs MST 600 lbs 00 lbs 00 lbs kg 589 kg 498 kg 75 kg 589 kg 498 kg 4.5 in. DI in. DI oander 000 on Flush or Wall-Mount ase Reach & Height bove Floor Dimensions are for reference only and subject to change without notice. oander 000 Flush ase 5F0 5F0 5F0G 5F0S 5F0S6 5F0EGR 5 in sch 40 pipe 4.5 in in 40 4X.69 [7 ] dia hole.5 in.88 in 5 5 in sch 40 pipe.5 in oander 5 in sch 40 pipe 000 Wall-Mount ase 5W0 5W0 5W0G 5W0S 4.5 in 5.88 in 68 4X.69 [7 ] dia hole 5W0S6 40 5W0EGR in 4 6 in 48 in 60 in 7 in 84 in X.69 [7 ] dia hole MST MST 7.06 in 4.5 in 5.88 in in 7.06 in 79 5 in sch 40 pipe 48 4X.69 [7 ] dia hole 4X.69 [7 ] dia hole 4.5 in 5.88 in 4.5 in in IMPORTNT: It is the owner or operator s responsibility to determine the suitability of the equipment to its intended use..5 in Study all applicable codes, manuals and regulations. e sure to read the Owner s Manual supplied with the equipment before operating it..88 in 5

11 PERFORMNE 500 lbs 680 kg oander 000 on Wheel ase in. DI 9 in in. DI MST 4 } in 78 in in 56 () (in) () in 77 4 in dia in 9 4 in 5 in in. DI 4 Leg Pos Leg Pos 4 (lb) (lb) (lb) (lb) (kg) DO NOT USE /- DO NOT USE /-4 DO NOT USE (kg). in 56 7 in in RNGE lbs 00 lbs 00 lbs kg 589 kg 498 kg 4.75 in 4 in 40.8 in 49.6 in 8 in in 4 in 40.8 in 49.6 in reach in dia 5 4 in dia in 688 in 77 /- / in in RNGE 8 in in dia 5 MST Leg Pos (kg) 6 in dia 00 lbs kg 500 7lbs in kg 900 lbs 86 kg 5 in 66.8 in 688 Leg Pos (kg) 9 95 oander 000 Wheel ase Load Ratings oom Position 94 7 in 78 Hook Height (in) 5.5 inmst in 0 oander 000 Wheel ase Reach & Height bove Floor 60 4 in dia 0. in in in 500 lbs kg RNGE lbs 48 in 86 kg lbs 00 lbs 00 lbs 75 kg 589 kg 498 kg 94 RNGE in lbs lbs 00 lbs kg 589 kg 498 kg lbs 589 kg Hook Reach 48 RNGE 9 in 0 oom Position 74 RNGE 900 lbs 86 kg IMPORTNT: rane DOES NOT rotate when assembled in 5R0 wheel base. 0 in lbs 589 kg 5 in in SEE LOD RTINGS ON RNE DO NOT USE Dimensions are for reference only and subject to change without notice. IMPORTNT: 4 in It is the owner or operator s responsibility to determine the suitability of the equipment to its intended use. 094 Study all applicable codes, manuals and regulations. e sure to read the Owner s Manual supplied with the equipment before operating it in 4 in 40.8 in 49.6 i m

12 ESSORIES ND OPTIONS ccessories for oander Series Item Part Number Description Roller/all earing ase nchor Kit 5PT0RG 5PT0RG-S 5PT0RG-S6 5PT0RG-SS 5PT0RG-SS6 5PT0RG-X N50-5 N50-5S N50-5S6 N6-6 N6-6S N6-6S6 5PT0RG 5PT0RG-S 5PT0RG-S6 5PT0RG-SS 5PT0RG-SS6 5PT0RG-X Red electrostatic powder coat paint finish - Good 04 Stainless steel electro-polished finish for added protection -etter 6 Stainless steel electro-polished finish for a higher level of protection - est 04 Stainless steel electro-polished finish for use with Stainless Steel ase only 6 Stainless steel electro-polished finish for use with Stainless Steel ase only -part epoxy paint (gray) finish for higher level of protection - Premium 4 Hilti Zinc Plated Steel fasteners / X 5.50 STL K-TZ 4 Hilti 04 Stainless Steel fasteners / X 5.50 SST04 K-TZ 4 Hilti 6 Stainless Steel fasteners / X 5.50 SST6 K-TZ 4 Hilti Zinc Plated Steel fasteners 5/8 X 6.00 STL K-TZ 4 Hilti 04 Stainless Steel fasteners 5/8 X 6.00 SST04 K-TZ 4 Hilti 6 Stainless Steel fasteners 5/8 X 6.00 SST6 K-TZ Drill-Drive Kit ED00-DW 0 V,.5 amp, 00rpm drill-motor to power drive the hand winch. Only available for cranes configured with the M winch option. Includes -/8 hex drive socket. able Spooler Headache all Keeper RW50 H0--5 H0-5-8 H0S--5 H0S-5-8 RK9-5S RK9-5S6 6 stainless steel reel winds up wire rope when detached from crane. Red Painted 0lb fits /6 to /4 Rope Red Painted 0lb fits /4 to /8 Rope Stainless Steel 0lb fits /6 to /4 Rope Stainless Steel 0lb fits /4 to /8 Rope Stainless steel bracket attaches to base or other structure to hold free end of the wire rope when detached from the crane. dditional Options for oander Series Thern offers a variety of additional options you can choose to enhance your davit crane. FTORY LOD TEST Upon request, Thern can test your crane prior to shipping, up to 5% of rated load. EXTENDED 5-YER WRRNTY Extend our standard -year warranty to 5 years. PE STmP - PROFESSIONL ENGINEER STmP vailable upon request at time of order. E mrk vailable upon request at time of order, E mark for products sold into the European union. TEX LSSIFITION Specially rated for use in explosive settings. vailable upon request at time of order. POWER WINH OPERTION electric in any voltage. D electric, hydrualic and pneumatic power winches available. ustom ELETRI ONTROLS Thern can build the high quality controls you need to operate your equipment. DRILL-DRIVELE WINH worm gear hand winch is also available for operation with a 400 rpm max drill motor option. LImIT SWITH dd an emergency safety shut-off to ensure safe operation. Form MS-046 ustomization ustomization is available for almost all Thern products and should always be performed by our engineers to assure the changes meet our stringent quality standards. elow are some of our more coon customization requests. Only factory modifications are covered under warranty. Special davit crane built to lift UV panels at water treatment facilities LONGER LIFT DISTNES ustomized winch and crane configurations to accoodate longer lifts. ustom OLORS & FINISHES ustom colors and finishes are available to match your unique application EXTENDED OOm ND msts Thern can extend mast s and boom lengths to fit your needs RELOTE THE WINH The winch can be relocated to fit confined spaces or restrictions SPEIL SES ustom bases or mounting requirements can be manufactured to meet your unique situation Thern, Incorporated orporate Headquarters 57 Industrial Park Road Winona, MN US Phone: Thern Europe Windmolen 7609 NN lmelo Netherlands Phone: europe@therneurope.eu