Section 5A Exhaust BT to 1984, XL to 1985 Baffles-Brackets-Clamps... 6,14-17 Drag Pipes... 7-9 Exhaust Reproductions...2-6, 13 Hardware... 14 Mufflers... 10-12 Heat Shields... 2-6, 13, 18-19 Cycle Shack FXR...11 Ironhead 1957-85...8 Paughco Dual & Dresser...3-5 Staggard Duals...7, 9-10 V-Twin Dresser...2-4, 6 PRESTON CYCLE PRODUCTS INC. 5A-1
Stock 2 Into 1 Note: All systems 4 piece construction except 1965-69 model which is 3 piece incorporating the Y-flat pipe construction. 95800 95831 95801 95806 95839 Early Style Two into One Exhaust 1936-69 Once hard to find two into one exhaust pipe system designed to replace stock style systems. Will fit rigid or swing arm frames. Made from 1-3/4 tubing chrome plated, order clamps separately. PCP Years Finish Model 95831 1936-47 Chrome FL-EL 95832 1941-47 Chrome Knuckle 95833 1941-47 Black Knuckle 95836* 1948-57 Chrome Pan 95838 1948-57 Black Pan 95837* 1958-64 Chrome Pan 95839 1965 only Chrome Pan FL-74 3 pc 95840 1966-69 Chrome Shovel FL-FLH 3 pc NOTE* Y-pipe features correct saddle and flat pipe includes riveted bracket. 1 3/4 O.D. Stock Type 2 into 1 - Chrome Pipes Single type for 1970-84 FLH type fits Shovelheads when the front pipe is inside front frame tubes. 95800 Kick 1970-84 FL-FLH 95823 Kick 1970-84 FL-FLH, Paughco 95806 K & E 1970-84 FLH with heat shields 95801 Electric only, 1970-84 FL-FLH 95804 1980-84 FLT Chrome 3 Piece Heat Shield For use on 1970-84 2:1 exhaust. 45561 16505 16509 16506 Exhaust Repair Ports Aluminum castings to be welded on broken or damaged heads. Use PCP# 16506 steel pipe flanges to repair Shovel pipe flanges. Sold in pairs. PCP Years Models 16505 1948-65 Panhead 16509 1966-84 Shovel 16506 1966-83 Shovel Black 2 into 1 Exhaust Header Set 3 Diameter turn out pipe. For use with forward controls only. Will not fit with footboards or mid controls. 95954 1970-84 FL 5A-2 PRESTON CYCLE PRODUCTS INC.
True Dual Exhaust 95827 Installed True Dual Chrome Exhaust Systems These systems feature a single pipe for each side. Each pipe is independent, rear pipe for the left and front pipe for the right without intersection. Panhead styles fit with or without mousetrap. 1-3/4 O.D. Order 2 piece heat shield set separately. PCP PAUGHCO Application 95825 1948-64 Panhead 95826 1965 Panhead 95828 1970-84 Shovelhead FLH 95827 95918 1970-84 Shovelhead FLH 95829 1980-84 Shovelhead FLT Panhead S Pipe Crossover Systems 1948-65 Paughco 1-3/4 single and dual crossovers for rigid and swingarm frame panheads. Four different systems that feature front squish pipes. Complete your exhaust system by combining these headpipes with tailpipe extensions or universal mufflers. Heat shields are recommended. Crossovers for Swingarm Frames Only Designed for models with electric start. 95826 3 Piece single crossover with mounting bracket 95811 4 Piece crossover duals that can be used with a kicker Crossovers for Rigid and Swingarm Frames These systems are for use on kickstart models only, but they will also work with a mousetrap. 95810 4 Piece crossover duals with mounting bracket 95825 2 Piece single crossover with mounting bracket 94033 94031 Heat Shields PCP Fitment 94033 Crossover on #95811 94031 Crossover on #95809 PRESTON CYCLE PRODUCTS INC. 5A-3
Paughco Shovelhead S Pipe Crossover Systems 1966-69 Paughco 1-3/4 single and dual crossovers for rigid and swingarm frame Shovelheads. Three different systems that feature front squish pipes. Complete your exhaust system by combining these headpipes with tailpipe extensions or universal mufflers. Crossovers for Swingarm Frames Only Designed for models with kick or electric start. 95828 3 Piece single crossover with mounting bracket 6050 4 Piece crossover duals 6050 Crossovers for Rigid and Swingarm Frames These systems are for use on kickstart models only. 95809 3 Piece single crossover with mounting bracket 75100 Cross over pipe only for #95809 Heat Shields 94033 Crossover on #6050 94034 2 Piece exhaust covers for #6050 94033 Black Replica Panhead Exhaust Kit Pipes have a black painted finish and include flex tube covers, installation hardware and parkerized clamps. 95846 FL 48-57 T/L Chrome Crossover Pipe Shovelhead For FL models 1970-84. 95774 65494-70 scraping on right hand turns, d Panhead Exhaust Header Set Black 4 piece pipe set for FL 58-64. 95847 5A-4 PRESTON CYCLE PRODUCTS INC.
Paughco 95800 Paughco Crossover Systems 1980-83 Touring 1-3/4 Single and dual crossover headpipe sets for 1980-83 Shovelhead 5 speed FLT and FLHT models. Complete your exhaust system by combining these headpipes with tailpipe extensions or universal mufflers. Heat shields are recommended. Single and Dual Crossover Headpipe Set 95829 2 Piece single crossover with mounting bracket 2-Into-1 Headpipes 95804 Headpipes only Heat Shields PCP Fitment 94028 Front shield on #95829, #95815 and #95804 94029 Low front shield on #95815 and #95804 94056 Rear pipe on #95829 and crossover on #95815 94058 Rear pipe on #95815 94023 Rear pipe on #95804 Paughco Crossover Systems FL 1970-84 1-3/4 Independent and crossover pipes for 1970-84 Shovelhead FL models with swingarm frames. Two different crossover systems and a set of 2-into-1 head pipes for 1970-84 Shovelhead engines in 4 speed swingarm frames with kick or electric start. Complete your exhaust system by combining these headpipes with tailpipe extensions or universal mufflers. Heat shields are recommended. Single and Dual Crossover Headpipe Set 6049 3 Piece crossover duals 2-Into-1 Headpipe Set Accepts the stock kickarm and clears the floorboards and HD factory highway bars. 95800 Headpipe set only Heat Shields PCP Fitment 94017 Front heat shield for #95827, #6049 and #95800 94018 Low front heat shield for #6049 and #95800 94033 Crossover on #6049 94059 Snail heat shield for left side crossover on #6049 94033 PRESTON CYCLE PRODUCTS INC. 5A-5
Dual Exhaust to 1984 95811 6050 Chrome Dual Pipe Cross Over Systems Do not include mufflers, clamps or shields. 95809 Panhead 1949-57 rigid mechanical w/mousetrap 94031 Shield for above 95810 Panhead 1958-64 w/mousetrap 94032 Shield for above 95811 Panhead 1965 only w/mousetrap K&E (4 pc) 94033 Shield for above 6050 Shovelhead 1966-69, 4 piece K&E 6049 Shovelhead 1970-84, 3 pc K&E 94036 Shield for above 95815 FLT 1980-83 (3 pieces) 94038 Shield for above 94033 94031 16331 FLH Dual Exhaust Pipe Clamp Kits Order pipe support separately for 1958-84. 16331 1958-65 16332 1966-69 16333 1970-84 3759 1958-84 Right side support tube 3762 1958-84 Left side support tube 16333 Rear Cross-over Pipe Clamp Bolts to rear cylinder base. Each 16237 1954-61, cad (65510-54) 16335 1962-64, chrome (65510-61) 5A-6 PRESTON CYCLE PRODUCTS INC.
Staggered Duals 95879 95876 75016 75014 95886 95877 Paughco 1-¾ Close Fit Staggered Duals 1966-69 Exhaust systems will fit all 1966-69 kick or electric start Shovelhead engines in swingarm frames. Will not fit rigid frames with mechanical brakes. Can also be used on Panhead bottoms with Shovelhead top ends. Has slider channels to ease installation. Heat shields are recommended. 95876 40 Slash cut drag pipes 95891 38 Tapered muffler pipes 95877 38 Slash cut muffler pipes 95878 38 Super slash cut muffler pipes 75016 Hanger bracket 75013 Rear heat shield Paughco 1-¾ S-Pipe Staggered Duals 1966-69 Chrome 3-piece exhaust system features an inside-the-frame front squish pipe, an over-the transmission rear pipe for 66-69 generator Shovelhead. Will fit rigid or swingarm frames with kickstart only. Will not work with large FLH battery. Has slider channel for easy installation. Heat shields are recommended. 95879 40 Slash cut drag pipes 95886 38 Tapered muffler pipes 75014 S-Pipe hanger clamp 75015 Rear heat shield 21060 21061 95874 Paughco 1-¾ Staggered Duals 1966-69 Shovel Chrome outside-the-frame front pipe and rear pipe that routed in front of the transmission. Will fit all 66-69 Shovelhead with swingarm frames and rigid frames if the mechanical brake crossover tube is removed. Has slider channel for easy installation. Heat shields are recommended. 95874 40 Slash cut drag pipes 95875 38 Tapered muffler pipes 75012 Rear heat shield Fiberglass Exhaust Wrap PCP Width Length Colour 21060 2 25 Light Brown 21061 2 25 Copper PRESTON CYCLE PRODUCTS INC. 5A-7
Staggard Duals 6205 Muffler Pipes-Cycle Shack 1957-85 These classic staggered duals feature our exclusive 16 gauge one-piece construction, 1-3/4 O.D. head pipes, 2-1/2 O.D. mufflers, all steel baffles, show-chrome, and the famous Cycle Shack fit for all Ironhead Sportsters, 1957-85 (will not fit 1979 models). When used on 1980-85 models, use our #2067 brake pedal stop). Mount bracket BK-4 included. 6205 2 Tapered style (PHD-212T) Paughco 1-¾ Staggered Dual Exhaust Complete, 38 long exhaust systems are designed for shovelhead 4 speed FX models with kick or electric start and a swing out kicker arm. Features slider channels and includes a hanger bracket for installation. Heat shields for the front and rear pipes are recommended. PCP Style 95900 Super slash cut 95901 Tapered muffler set 95902 Megaphone muffler set Heat Shields PCP Fitment 94017 Front pipe 94016 Rear pipe 82123 Hanger bracket Cycle Shack Staggered Duals--1979 XL s A 1-3/4 exhaust system made exclusively for the 1979 Sportster. Includes mounting bracket. 6224 Tapered style (PHD-117T) 5A-8 PRESTON CYCLE PRODUCTS INC.
Staggered Duals 95881 95904 95905 95882 Paughco 1-¾ Staggered Duals XL 57-78 38 Long, chrome muffler sets with slider channels. 95881 Tapered 95882 Super slash cut Paughco 1-¾ Staggered Duals FXR 82-83 Complete exhaust systems for Shovelhead FXR, FXRS rubbermount models. Has slider channels on mufflers to bolt to the stock HD hanger bracket. Heat shields are recommended. 95904 38 Tapered muffler pipes 95905 38 Super slash muffler pipes 94017 Front heat shield 75018 Rear heat shield 95887 95892 95888 Paughco 1-¾ Over the Transmission Exhaust Chrome 38 muffler pipes have slider channel for easy installation. Rear heat shield is highly recommended. Fits swingarm FX models 71-84. For kickstart only. Will not work with FXE battery. 95887 Tapered mufflers 95888 Super slash cuts 75015 Rear heat shield 94017 Front heat shield 95893 Paughco 2-Into-1 Panhead Headpipes 3-Piece sets. 1948-57 models have a mechanical brake S pipe. 1958-65 models with stock frame and kick or electric start use a hydraulic brake S pipe. 95892 Mechanical brake headpipes 95893 Hydraulic brake headpipes 75020 Rear heat shields for #95892 and #95893 PRESTON CYCLE PRODUCTS INC. 5A-9
Drag Pipes 95855 Paughco FX Slash Cut Drag Pipes 40 long drag pipes are designed for shovelhead 4 speed FX models with kick or electric start and a swing out kicker arm. Features slider channels for use with hanger bracket #82123. Heat shields for the front and rear pipes are recommended. PCP Style 95903 Slash cut 95986 Chrome Up Sweep Header Sets by Paughco Pipe and bracket set will accept straight fishtail extensions or mufflers which are sold mounted separately. Three piece systems feature an S type front pipe for better ground clearance PCP# 95855 and #95986 will not fit with electric start wrap around oil tank. PCP#95854 and #95987 can only be used with FXE type battery box. PCP# 95855 must be used with hydraulic brakes only. Type 95835 1948-57 Pan Rigid (3 pce system) 95853 1958-65 Pan Swing arm (3 pce system) 95855 1966-69 Early Shovel Rigid (3 pce system) 95986 1970-84 Late Shovel Rigid 95987 1970-84 Late Shovel Swing arm Heat Shields PCP Fitment 94017 Front pipe 94016 Rear pipe 82123 Hanger bracket Flash Gordon Fishtail Muffler Chrome 24 baffled fishtail muffler with 2-½ diameter to fit 1-¾ pipes. Sold each. 94774 94511 94512 Bobber Style Mufflers Replaces the Y pipe on rigid frames. Fits Panhead or Knucklehead. PCP Type Finish 94511 Upsweep Chrome 94512 Straight Black Chrome Scalloped Fishtail Mufflers Straight through without baffles. 1-7/8 diameter to fit 1-3/4 pipes. Set of two. 94070 5A-10 PRESTON CYCLE PRODUCTS INC.
Mufflers 95701 Cycle Shack Mufflers for FXR-FXRS-FXLR Replacement mufflers for the 1982-86 FXR-FXRS-FXLR models. Choice of classic tapered, bold SS, or stylish turn-out styles to give your FXR a new look and improved performance with these low restriction show-chrome beauties. Includes hidden channel mounts and T-bolts for mounting to factory support tube. Uses stock clamps. Sold in pairs. 3534 Turn-Out mufflers for 1982-86 FXR-FXRS Turn Out Mufflers for Big Twin 1958-84 4 Speed By using FLT muffler clamps #16227 these mufflers can be installed on 1980-84 FLT s. Great for single or dual exhaust use on FLH models. 3 diameter. Slots and brackets on rear of muffler. Mount track on back. 95700 30 Long x 3 body O.D. (pair) 95701 36 Long x 3 body O.D. (each) 3078 3 Body clamps (pair) 629 1-7/8 End clamps (pair) 6329 94700 95735 94701 95706 94701 Chrome Original Style XL and FX Mufflers OEM seam type replaces 65230-65 for Sportsters and Superglides. 2-1/2 body O.D. Sold Each 94700 1958-61 Sportster (65230-58) 17 94701 1962-64 Sportster (65230-62) 19 94702 1965-76 Sportster (65230-65A) 19¼ 1971-76 FX, FXE 1967-69 Side Draft Muffler - Chrome Chrome plated replica of OEM 65240-67 on FLH models. For restoration or nostalgic look on later models, 3-1/4 Dia. x 28 long, 1-3/4 inlet. sold each. 95702 Chrome muffler 95707 95706 Installed Cigar-Type Mufflers - Chrome (Each) Chrome plated, these mufflers are exact replacements for all 1950-66 FL, FLH. 1-3/4 Inlet, 3-1/4 Body Diameter. PCP Fits Length 6329 1950-57 24, (Preston) (65235-50) 95735 1950-57 24 Black (Preston) 95706 1950-57 24 USA made (65235-50) 95707 1958-66 22 USA made (65240-58) 3095 All Stainless clamp, body (65293-58) 629 All Inlet clamps (pair) 1970-84 FLH Muffler - Chrome OEM type construction featuring diagonal cut end with fluted side markings, replaces 65242-70B. 28 Long. 1-¾ Inlet. 95704 Chrome muffler 3-1/4 body O.D. 3079 3-1/4 Body clamps (pair) 628 1-3/4 End Clamp (each) PRESTON CYCLE PRODUCTS INC. 5A-11
Fishtails & Tips 6042 Classic Fishtail Muffler Show-chrome muffler with an antique style tip. This clean, bracketless muffler allows left or right side mounting and has a 1-3/4 inlet. 31½ long with 2-1/2 body O.D. 6507 94000 6043 FL Style Fishtail Mufflers Show-chrome replica of the 1958-66 FL muffler. This clean, bracketless muffler allows left or right side mounting and has a 1-3/4 inlet. Available in two lengths. 3-1/4 body O.D. 6042 28 long (65244-62) (each) 6043 33 long (65258-88T) (each) 95750 94001 Unbaffled Fishtail Straight Pipes for 1 3/4 94000 30 Fishtail straight pipe, 1 7/8 O.D. pre 85 (each) 94001 36 Fishtail straight pipe, 1 7/8 O.D. pre 85 (each) 6351 6352 Chrome FLT-FLHT Muffler Sets 1980-84 Mufflers fit the existing clamps and hangers. PCP Type Length O.D. 95750 Fishtail 30 2.5 629 End clamp Fishtail Mufflers - Chrome 2-3/4 diameter with inlet to fit 1-3/4 O.D. pipes. Steel baffle core. Clamps sold seperately. 6351 30 long (each) 6352 36 long (each) 3077 Body clamps 2-3/4 (pair) 629 End clamps 1-7/8 (pair) Knucklehead Stock Replacement Muffler Replaces OEM 65251-41. Fits all Big Twins 1941-49. Muffler body O.D. 3 1/4 93005 Black (1001-41) 93006 Chrome 3-1/4 O.D. Fishtail Tips for 1-3/4 Pipes Chrome exhaust tips slip over the outlet of the muffler or straight pipe. Available in 1-3/4 inlet diameter, these classic fishtail tips measure 7 long and 5-5/8 high. (Sold each). 3774 Fishtail 1-3/4 diameter x 7 length Chrome Three Fin Rocket Mufflers 22 Dual muffler set features OE style duo-glide mufflers with three fin rocket style muffler tips. Fits FL 1958-84. 94779 5A-12 PRESTON CYCLE PRODUCTS INC.
Early Exhaust Pieces Rear Cylinder Pipe For use with single exhaust 94503 Knuckle 1936-47 chrome (65493-36) 94504 Pan 1948-65 chrome (65493-48) 94505 Shovel 1966-69 chrome (65493-66) Front Cylinder Header Pipe 94500 Knuckle 1936-47, chrome (65440-36) 94524 As above, black 94501 Pan 1948-65, chrome (65440-48) 94502 Shovel 1966-69 (65443-66) Rear Cross-over Pipe Chrome to fit into rear header pipe and cross over to left side PCP Years OEM 94520 1948-64 65494-61 94521 1965-69 65494-65 94522 1970-84 65494-70 Rear Exhaust Pipes Chrome for Big Twin with crossovers. 94506 1958-64 Pan (65496-61) 94508 1966-69 Shovel, for most aftermarket dual exhaust only Rear Cross-over Pipe Clamp Bolts to rear cylinder base, sold each 16237 1954-61, cad (65510-54) 16335 1962-64, chrome (65510-61) BT Stock Exhaust Connector (Flat) and Y Pipes 94510 (A) 9 Flat, chrome 1936-64 (65465-36) 94516 Flat replica with rivets, chrome 1936-64 (65465-36) 94515 (B) Y 16 exact replica, chrome 1958-64 (65505-58) 94518 As above, black 1958-64 (65505-58) 94519 (B) Y 10-1/2, chrome 1941-57 (65505-41) 94514 As above, black 1941-57 (65505-41) 94523 (C) Combo exact replica, chrome 65-69 (65538-65) Front Pipe to Frame Clamps For 1936-65. Includes 65512 37A pipe clamp and 65513 58 to frame, black finish, for secure installation. 16235 Set (parkerized) 16236 Frame clamps ( each) Chrome Flex Exhaust Covers (Sold Each) For all Big Twin 74 & 80, 1-3/4 and 1-1/2 to fit all 45 models. Slides on. Use on 1948-65 Panhead with 2 piece exhaust system. Model I/D 2419 74 & 80 1-7/8, 10-1/4 to 13-1/2 Left Side Cross Over Heat Shields Fits Paughcho left side pipe 1948-64 and stock 1961-64 cross over. 94009 PRESTON CYCLE PRODUCTS INC. 5A-13
Mounting Hardware FL Muffler Support Tubes (Black finish) For use on 1958-84 FL 4 speed. 3759 Right (65318-58A) 3762 Left (65318-59B) Cycle Shack Mounting Brackets Supports are available to fit Cycle Shack s muffler and drag pipes. A universal strap bracket is also available to fit most other pipes. Black finish. 6651 FLH electric start only PHD-118 series (BK-3) 6652 XL PHD-112 and PHD-117 series mufflers and PHD-110 and PHD-210 drag pipes (BK-4) 27007 12 Strap bracket for rear pipe on PHD-121 series muffler and PHD-111 and PHD-113 series Shotgun pipes (BK-6) 6654 Early FLH PHD-125 series pipes (BK-7) 732 Pair of 12 long universal strap brackets to fit other pipes for the H-D 74 engine produced with mounting studs. Not for use with adjustable channel mount. (BK-74) FXR Exhaust Bracket Mounting Block Fits all FXR 1982-86 models. Replaces 65780-82. Each. 27242 Brake Pedal Stop The 1980-E87 Sportster have a combination mounting bracket and brake pedal stop welded to the stock pipes. When the pipes are replaced, it is necessary to either cut off and re-use the stock brake pedal stop or to use our #2067 which does not have to be welded to the new pipes. 2067 T-Bolt Set For use with muffler pipes that have channel type mounting. Includes nut. 797 5/16 x 18 bolt set (pair) 4700 1982 FXR Exhaust Pipe Bracket-Zinc 27271 Rear (65671-82) Floorboard Bracket FLH 1970-84 This bracket must be used to replace the right side factory floorboard mount if you want to retain floorboards on an FLH when using our series muffler pipes and drag pipes. 2066 Right Rear Mount Bracket 1970-84 1970-on foot board mount stud replaces 50655-70, zinc plated. 4700 5A-14 PRESTON CYCLE PRODUCTS INC.
Exhaust Clamps Offset Bracket For exhaust systems. 730 Sportster Front Pipe Clamp Replaces OEM 65514-58. Use on all 1958-78 XL s. Also can be used as a universal hanger. Chrome plated. Sold each. 1436 Exhaust Port Clamps Unique design allows bolt to be nearer the exhaust pipe for positive clamping strength. Also permits easy access with wrenches. Exceptionally strong chromed steel with allen bolts. Sold in pairs. 635 Sportster XL 1957-85 Chrome Universal Flat Straps Sold Each 636 Panhead 1948-65 580 3 632 6 581 8 16209 16203 Frame Mounting Clamp Sets 1 Frame clamp for mounting exhaust pipes or foot pegs. Sold in pairs. PCP Finish 16203 Chrome 16209 Black FLT Muffler Clamps Choose body or inlet clamps for 1979-84 when installing custom mufflers, sold in pairs. PCP OEM Item Finish Year 16227 3 I.D. Body clamp Chrome 1980-84 Super Manifold Clamps These high quality stainless steel aircraft clamps are designed with a heat treated T-bolt and self-locking nut. 5478 All XL s 1957-84 (sold in pairs) Stainless Steel Muffler Body Clamp Set Sold as a pair for 2-½ muffler body. Fits 1952-56 K and 1957-76 XL. Replaces 65279-57. 20112 Kreem Blue Shield Internal exhaust pipe sealant designed to prevent pipe blueing on properly tuned motors. Since blueing is caused by excessive heat, it may still occur if an engine is not in proper tune or if the carburetor is jetted too lean. Slight blueing may occur on pipes with extremely sharp bends coming from heads. Install on new, clean pipes only. 78008 Each PRESTON CYCLE PRODUCTS INC. 5A-15
Exhaust Clamps P Clamps- 1/8 Thick steel by 7/8 wide with an adjustable flat bar measuring approximately 6-½ long. PCP Size Finish UM Application and Use 787 1-½ Chrome Each 788 1-¾ Chrome Each 778 2 Chrome Each Center Clamps PCP Size Finish UM Application and Use 774 1-¼ Chrome Pipe and muffler 775 1-3/8 Chrome Pipe and muffler 627 1-½ Chrome Pipe and muffler 776 1-5/8 Chrome Pipe and muffler 628 1-¾ Chrome Pipe and muffler 629 1-7/8 Chrome Pair Pipe and muffler 3768 2 Chrome Each Pipe and muffler Aircraft Style Exhaust Clamp- 1/8 Thick rolled steel design to allow the allen bolt to be closer to the pipe. PCP Size Finish UM Application and Use 3318 Chrome Pair 1948-65 Panhead (65274-88T) 3314 Chrome Pair 1957-85 XL (65273-88T) 16239 Chrome Pair 1957-85 XL Extra wide Header Clamp Set PCP Size Finish UM Application and Use 16568 Stainless steel Pair 1948-65 FL 2-1 with hex bolt (65519-48) 16288 Stainless steel Set 1952-56 K model, 1957-78 XL 16568 Knuckle Clamp Set 1937-40 19002 Parkerized 19211 Chrome FL, EL Exh/Clamps 1937-69 Clamps front lower exhaust pipe to frame. Replaces 65512-37. 19219 Chrome BT Clamp Set Knuckle 1941-47 & Panhead 1948-57. 19004 Parkerized 19212 Chrome BT Exhaust Clamp Set For 2:1 exhaust. Order exhaust and header clamps separately. Fits 1958-65 Panhead/Shovelhead PCP Description 19213 2 chrome and 2 SS clamps 19214 2 SS and 2 black clamps 5A-16 PRESTON CYCLE PRODUCTS INC.
Exhaust Clamps & Baffles Hanger Clamps with OEM Style Short Strap PCP Size Finish UM Application and Use 2549 2-7/8 Chrome Each Mount muffler body to frame 3079 3-¼ Chrome Pair Mount muffler body to frame 3095 3-¼ Stainless Steel Each Mount muffler body to frame 94201 3-¼ Chrome Each Mount muffler body to frame Hanger Clamps with Medium Strap- Mounting tabs must be drilled PCP Size Finish UM Application and Use 94202 3 Chrome Pair 94203 3-¼ Chrome Pair 94204 3-½ Chrome Pair Hanger Clamps with 4-½ long strap PCP Size Finish UM Application and Use 3075 1-7/8 Chrome Pair Mount muffler body to frame 3076 2-½ Chrome Pair Mount muffler body to frame 3077 2-¾ Chrome Pair Mount muffler body to frame 3066 2-7/8 Chrome Pair Mount muffler body to frame 3078 3 Chrome Pair Mount muffler body to frame 3080 3-½ Chrome Pair Mount muffler body to frame Pipe Baffles-Sold Each PCP I.D. Length Description 3317 1-¾ 4 Mini, all steel 831 2 4 Mini, all steel 3556 1-¾ 12 Extra long, all steel 3557 2 12 Extra long, all steel 3315 2-3/8 SS Silencer baffle for Cycle Shack pipes. Not straight through. PRESTON CYCLE PRODUCTS INC. 5A-17
Heat Shields 45206 94012 94013 1970-84 FLH Heat Shield Set 5 Piece set includes 2 for the left and three for the right side to fit dual crossover systems. 59701 B Chrome Universal Straight Heat Shields Heat shields include mounting clamps and are available for 1 3/4 or 2 1/4 pipes. Sold each. For 2-1/4 Pipes 45206 4 heat shield 94014 E A For 1-3/4 Pipes 94012 10 heat shield 94013 12 heat shield 94014 18 heat shield F E Chrome Heat Shields for FLH 1970-84 Stock replacement for models listed. Worm clamps included. PCP OEM App. Item 3767 65561-70 Front A 3764 65563-70 Rear B 95601 65565-70A Lower Y C 94011* as above 10 C 94030 65703-65B Left top E 3770 65707-77 Left vertical F *Notch for rear pipe fits other 2:1 FL style headers 3760 Heat Shield Fits the lower part of the front pipe on FL crossover dual or 2-into-1 exhaust systems for Softail models. 94011 10 Long with notch 1164 7 Long. Fits 1-1/2 to 2 O.D. pipes. Universal Heat Shields Fit 1 3/4-2 Pipes. Includes clamps for installation. Each. PCP Length Type 3760 9 Perforated 45153 8 Flame 45154 11 Flame 5A-18 PRESTON CYCLE PRODUCTS INC.
Heat Shields Chrome XL-XLS Pipe Shield Replaces 65532-82A on XL-XLS 1983-85 models. 45559 Chrome Heat Shields Stock replacement shields include worm clamps. 45563 1980-84 FXWG (65556-80) 3771 3769 Sportster Exhaust Pipe Heat Shields Chrome covers for 1957-on stock or drag pipes. 3769 65728-66 Front 1958-84 3771 65702-68B Rear 1958-84 3766 65698-66 Rear early small type 1957-84 Chrome Hot Spot Cover These Chromed Hot Spot Covers fit FL s where the front cylinder pipe meets the rear cylinder pipes. Just push to snap on. 464 Fits FL s 1970-84 Early Heat Shield - Chrome Chrome, replica Spoon as OEM 65700-38. 94002 5-1/2 Type 94003 9 Type Chrome Heat Shields 3171 Front FLT 1981-91 Muffler/Drag Pipe Heat Shields Designed to fit with either drag or muffler type pipes. Covers do not have cut out for cross-over tube. Sold in sets. 94019 Smooth FXE Shovelhead Chrome Short Exhaust Heat Shield Fits over 1-¾ exhaust pipes on FL 58-84. 45389 PRESTON CYCLE PRODUCTS INC. 5A-19
Gaskets Dual Copper Clad Exhaust Gasket Asbestos gasket sandwiched between two sheets of copper. The ultimate in sealing. 25177 10 pack 2662 Shovel Exhaust Port Fasteners Machined head port bolts are designed to interference fit with special E clip locks and custom patterned offset washers. The bolt holds the pipe secure by thread tension and clamps the pipe to the head by wedging the patterned washers against the pipe while the washers are, in turn, wedged between the pipe and the E clip locks fitted to the bolt heads. 2509 Shovelhead 1966-84, includes copper/asbestos gaskets Exhaust Stud Nut & Gasket Kit, 74 and 80 This new improved kit prevents thread stripping in head using permanent studs. Kit includes 2 studs, 2 Sure seal flange gaskets, 2 chrome nugget nuts and lock washers. 2662 Kit fits Shovelhead 1966-84 25175 Gaskets only (10 pack) 25175 Exhaust Pipe Port Rings Only Stamped steel exhaust pipe mounting rings for all 1966-83 Big Twins. 16506 Pair Crossover Gaskets Steel gaskets are used for installation in the crossover tube between the front and rear exhaust pipes. Fits all XL and FXR 1982-on. Each 79470 65781-82 Genuine James Exhaust Gaskets. PCP Description 79473 Exhaust port ring 66-83 all Shovel (65834-68-A) (10) 79474 Steel core, 1966-84 Shovel (65834-68-SC2) (2 pk) 79475 Fire ring 66-84 all 1200, 1340 Shovel (65834-68-SC) (10) 79477 Paper backed steel core fire-ring 1966-84 Shovel (65834-68-X2) (2 pk) 79479 Compressed wire, square profile exhaust mount gaskets 1966-84 Shovel (65834-98-X2) (2 pk) 5A-20 PRESTON CYCLE PRODUCTS INC. Black Exhaust Port Flange Allen Head Bolts Fits Shovelheads 1966-84. (3201W) 940 Sold in 10 Packs.