PAGE 264 Lock Cylinder & Keys 265 Keys 266 Door and Drawer 270 Multi Drawer 272 Flat Multi Drawer 273 Anti Tilt 275 Double Door 276 Large Door 278 Sliding Door 278 Roller Shutter 279 Glass Door 281 Glass Door Non Drilling 282 Accessories 284 Rotor Hasp Lock 285 Recreational Locks 286 Electronic Locks
Lock Cylinder and Keys Installation 1. With original key the cylinder core can be easily inserted directly into the lock housing. Removal 1. In the unlocked position, insert the removal key into the cylinder. 2. This releases the cylinder core from the housing. 3. Remove the cylinder core with the removal key from the housing. Key to Differ supplied with flap key and nickel key no assembly key required 600 different key combinations S Key numbers 326200 001-200 nickel plated 50 326204 201-400 nickel plated 50 326206 401-600 nickel plated 50 Keyed Alike supplied with flap key and nickel key no assembly key required 70 different key combinations Key numbers 326001-326070 001-070 nickel plated 50 264 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625
Keys Master Key red master key to unlock key numbers in its group 326802 master for cylinder cores 001-200 326803 master for cylinder cores 201-400 326804 master for cylinder cores 401-600 S Key numbers 326802 001-200 red / nickel plated 1 326803 201-400 red / nickel plated 1 326804 401-600 red / nickel plated 1 Grand Master red grand master key fits cylinder cores 001-600 special application limited availability Key numbers 326800 001-600 red / nickel plated 1 Removal Key yellow removal key suits all current BMB cylinder cores for core removal in the unlocked position only 326801 yellow / nickel plated 1 Blanks blanks for cylinder core groups S Key Numbers 326806 401-600 nickel plated 100 326807 201-400 nickel plated 100 326808 001-200 nickel plated 100 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625 265
Rim Lock Housing handed for drawers fixed from rear with 4 screws rosette included with housing can be used with striker plates, lockable knob and distance shim x = housing length 22mm for standard drawer fronts Door and Drawer 326300 nickel plated 20 Long Cylinder Rim Lock Housing handed for drawers fixed from rear with 4 screws rosette included with housing can be used with striker plates, lockable knob and distance shim x = cylinder length 32mm for double thickness drawer fronts and thick doors 326308 nickel plated 20 Long Latch Rim Lock Housing handed for R/H doors fixed from rear with 4 screws rosette included with housing can be used with striker plates, lockable knob and distance shim x = housing length 22mm extra long latch 22mm 326306 nickel plated 20 Interchangable Rim Lock Housing function switch to change from L/H to R/H door handed - left and right interchangable fixed from rear with 4 screws rosette included with housing can be used with striker plates, lockable knob and distance shim 326305 nickel plated 20 266 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625
Door and Drawer Slam Lock Housing function switch allows the lock to stay in open position or closed position latch snaps into position when lock is closed: when in function 2 postion latch will be held in open position by turning the key 180 anti-clockwise rosette included with housing Function 1 326350 nickel plated 20 Slam Lock Striker angled lip for smoother closing 326351 nickel plated 100 Inlaid Lock Housing non-handed fixed from rear with 2 screws rosette included with housing can be used with striker plates and distance shim 326310 nickel plated 20 Cam Lock Housing Wing Fixing accepts cam back plates as on pages 238 & 239 closure direction 90 rosette included with housing can be used with striker plates 326410 nickel plated 20 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625 267
Cam Lock Housing accepts cam back plates as on pages 238 & 239 non-handed cam locks are supplied with a standard 35mm straight cam can be used with striker plates S Suitable thickness Door and Drawer 326406 17mm nickel plated 20 326402 22mm nickel plated 20 326400 30mm nickel plated 20 Cam Lock Clamp fixes into the groove provided on the cam lock housing metal thickness up to 1.5m 326409 nickel plated 20 Stop Plate double door stop plate for use with camlocks holds second door without the need for barrel bolts or additional locks 326408 nickel plated 20 Back Plate Straight straight lever in 3 lengths 30mm, 45mm and 55mm for use with cam locks galvanised finish S L 326891 30 galvanised 20 326893 45 galvanised 20 326896 55 galvanised 20 268 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625
Door and Drawer Back Plate Notched hooked lever in 30mm length for use with cam locks galvanised finish L Size 326895 30 galvanised 20 Back Plate Offset cranked lever in two lengths 30mm and 50mm, both with 6mm crank for use with cam locks galvanised finish S L X 326897 30 6mm galvanised 20 326899 40 6mm galvanised 20 Konnect PVC Insulation Tape KPVC-BLK 19mm x 20m roll PVC insulation tape in black Konnect Silver Duct Tape KDUCT-SIL 48mm x 30m roll. Ideal for electrical insulation and harnessing of wires and cables. AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625 269
Multi Drawer Locking System Multi Drawer The BMB multi-drawer locking system allows the flexibility of using the BMB locks, bars and accessories to lock multiple inline drawers. The system consists of: lock bar - standard or channel pins - to suit standard and channel bar stop wedge locking bar guide - for non-recessed bar flat saddle - for recessed bar 1 Wing Front Mount Lock Housing 1 wing for fixing closer to the carcase edge fixed from rear with one screw rosette included with housing 12mm lift 180 locking travel 326370 nickel plated 20 2 Wing Front Mount Lock Housing fixed from rear with two screws rosette included with housing 17mm lift 180 locking travel 326372 nickel plated 20 Side Mount Inlay Lock Housing non handed fixed from rear with two screws rosette included with housing 600mm aluminium bar included with housing 326380 nickel plated 20 270 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625
Multi Drawer Standard Locking Bar use with multi drawer locks accepts arresting pins 326881, 326882 and 326883 S Length 326866 600mm aluminium 20 326867 1250mm aluminium 20 326868 1500mm aluminium 20 Pre Mounted Locking Bar use with multi drawer locks accepts additional arresting pins 326881, 326882 and 326883 if needed pre mounted with 326870 2 bar guides and 3 x 13mm pins S Length 326870 600mm aluminium 20 Non Recessed Guide fix to carcase for non recessed locking bars 326845 galvanised 40 Standard Arresting Pins use with standard locking bars S B 326881 13mm nickel plated 60 326882 16.5mm nickel plated 60 326883 19mm nickel plated 60 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625 271
Flat Multi Drawer Face Frame Lock fixed cylinder (non-removable) non handed retaining spring included nickel finiish S 326460 lock & key nickel 20 326885 master key grey / nickel 20 Standard Arresting Pins use with flat pack locking bars S B 326881 13mm nickel plated 40 326882 16.5mm nickel plated 40 326883 19mm nickel plated 40 Flat Saddle use with recessed locking bars zinc plated finish 326935 zinc plated 200 Stop Wedge fits on drawer side to engage arresting pins black finish 326888 black 20 272 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625
Anti Tilt Multi Drawer Anti-Tilt The BMB anti-tilt system uses several basic components to help eliminate the possibility of multiple drawers being opened at the same time on a pedestal causing it to become unbalanced and topple over. The system consists of: lock - 1 wing 12mm lift block - anti-tilt block to help eliminate the opening of two drawers at the same time bar - special bar with uneven pins M5 pin - to screw into bar and fit into bar catch catch - anti-tilt bar catch to hold the bar in place pins - to suit standard bar bar guide - to locate the bar flat saddle 1 Wing Front Mount Lock Housing 1 wing for fixing closer to the carcase edge fixed from rear with one screw rosette included with housing 12mm lift 180 locking travel 326370 nickel plated 20 Anti Tilt Drawer Block plastic screw on tilt block left and right hand assembly black finish S 326889 left hand plastic 80 326890 right hand plastic 80 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625 273
Anti Tilt Locking Bar designed to take 326884 - M5 arresting pin for anti tilt bar catch aluminium finish Length Anti Tilt 326900 1500mm aluminium 20 Anti Tilt Arresting Pin M5 thread for use with 326900 locking bar Length 326884 8mm nickel plated 20 Anti Tilt Bar Catch used to retain locking bar in raised position white finish 326887 white 100 Standard Arresting Pin use with anti tilt locking bars S B 326881 13mm nickel plated 60 326882 16.5mm nickel plated 60 326883 19mm nickel plated 60 Non Recessed Guide fix to carcase for non recessed locking bars galvanised finish 326845 galvanised 40 Flat Saddle use with recessed locking bars zinc plated finish 326935 zinc plated 200 274 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625
Double Door Double Latch Rim Lock Housing handed as per sketch rosette included with housing horizontal tongue to be secured with 7mm cranked striker vertical latch to be secured with striker plates as on page 247 or into a recessed grove includes 7mm crank striker 326416 nickel plated 20 Auto Catch double door auto catch eliminates the use of stop strips and barrel bolts interchangeable for top and bottom fixing strong durable ABS material black finish S 326874 top fixing black 50 327031 bottom fixing black 50 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625 275
Espangnolette Locks Large Door Three point locking systems used in areas where large doors are installed. By activating the central lock body with a key the upper and lower catch hooks engage with the locking bolts mounted on the cabinet s top and bottom. switchable L/H to R/H can be used with striker plate and lockable knob 326856 Espangnolette Rim Lock Housing interchangeable to R/H and L/H doors can be used with lockable knob 326856 on page 252 rosette included with housing 326329 nickel plated 20 Profile Rod D shape rod for Espangnolette Length 326826 1500mm nickel plated 50 Rod Guide screw on mounting 326822 nickel plated 20 276 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625
Large Door Catch Hook screw on mounting 326819 for right bottom or top left 326820 for left bottom or top right S 326819 nickel plated 50 326820 nickel plated 50 Locking Bolt locking bolt with mounting plate 326827 nickel plated 200 8mm 37mm 13.5mm Strike Plate metal lock strike plate for use with most locks including drawer-door and cam locks 37mm long with 28mm screw holes 426272 nickel plated 20 Stop Plate for use with double doors fixes to back of non locked doors allows lock housing to be set back further from the edge of the door non locked door must be closed first 326837 nickel plated 20 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625 277
Push Button Lock Housing suited to sliding doors doors can be locked without key by pushing lock cylinder non handed rosette included with housing Sliding Door 326390 nickel plated 20 Roller Shutter Lock Housing non handed fixed from rear with 4 screws rosette included with housing striker included with lock housing refer to page 252 Roller Shutter 326420 nickel plated 20 Tambour Door Lock Housing positive locking feature high security non handed fixed from rear with 2 screws striker included with lock housing 18mm diameter housing nickel plated / black finish 326996 nickel plated / black 20 278 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625
BMB BMB 20 Gleichschl. Verchromt 001 1920.100.001 Lock 1922.100.001 20 LOCKS 002 Brass 003 1240.700 Verschiedenschl. 1920.100.002 1920.100.003 1922.100.002 1920.100.000 1922.100.000 1922.100.003 1240.700 20 001 1920.100.001 1922.100.001 002 1920.100.002 1920.100.003 1922.100.002 1920.100.000 1922.100.000 22 Verschiedenschl. 1240.700 Glass Door 1922.100.003 1240.700 Aluminium Track Lock 30 003 20 22 push lock for aluminium track BMB removable core system accepts M5 extension pin 22 aluminium finish 1920.000 30 Verchromt 22 Gleichschl. 22 30 22 30 1921.000 327023 22 aluminium 20 1922.000 22 1920.000 Glasstärke 1921.000 6mm 1922.000 Thickness 1920.109 Pin Lock 0,5mm Verlängerungs- 1.069.A Verlängerungs- Glasstärke Verlängerungs- 6mm 1.069.A Thickness Verlängerungs0,5mm A B 1920.109 Lock 1.069.A glass case lock for sliding doors 6-8mm BMB keyed alike #001-002 16mm drilling to glass polished chrome finish For complete lock, must order 1 x A or B 1xC 1xD PARTS S Brass 1.069.A A Gleichschl. Verchromt 001 1920.100.001 1922.100.001 002 1920.100.002 1920.100.003 1922.100.002 1920.100.000 1922.100.000 003 Verschiedenschl. B D 1922.100.003 327024 #001 chrome 20 327025 #002 chrome 20 rosette polished 20.05mm spacer natural 20 C 327027 D 327028 1.073 C 1.073 Pin Lock Housing 1920.000 1921.000 1922.000 use with hinged glass doors unlock 180 clockwise suitable for glass 4-8mm thick requires a 26mm diameter drilling in the glass includes assembly washers and screws pin can locate into recessed hole orbehind an angled striker polished chrome finish 326425 Glasstärke polished chrome 20 6mm Thickness 0,5mm 1920.109 Stop Plate use with 326425 glass door pin lock adhesive backing can be used on left or right door polished chrome finish 326426 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625 polished chrome 20 279 1.073 2925_Artia CFH4 Locks.indd 279 13/03/2015 6:14 pm
Glass Door Lever Lock Housing use with hinged glass doors unlock 90 clockwise 26mm drilling to glass suitable for glass 4-10mm thick striker included cam length 21mm polished chrome finish 326430 polished chrome 20 Counter Component use with 326430 glass door lever lock polished chrome finish 326433 polished chrome 20 Edelstahl / Stainless steel finish 1240.000 Glass Push Lock Housing 26mm drilling to glass suitable for glass 4-8mm thick mounting washers and screws included polished chrome finish 326435 polished chrome 20 Drilling diagram Verlä stifte Seite Exten pleas page BMB Beschläge GmbH Tel.:+49(0)40 60904650 Fax:+49(0)40 52876672 Email: info@bmb-beschlaege.de www.bmb-beschlaege.de 280 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625
Glass Door Non Drilling Single Glass Door Set C F A 44 7 31 all components for 1 right hand glass door except lock core glass door lock non drilling fits 4-8mm glass suits BMB core removal system max door 500mm x 1000mm non drill hinges for inlay glass doors maximun opening 105 hinge arrests in open and closed position polished chrome finish PARTS S Qty Req. A 326437 lock polished chrome 1 Right Hand C 327019 stop polished chrome 1 E 327017 hinge left hand top/ right hand bottom polished chrome 1 E F 327018 hinge right hand top/ left hand bottom polished chrome 1 Double Glass Door Set E D F all components for double glass doors except lock core glass door lock non drilling fits 4-8mm glass suits BMB core removal system max door 500mm x 1000mm non drill hinges for inlay glass doors max opening 105 hinge arrests in open and closed position polished chrome finish PARTS S Qty Req. B A A 326437 lock polished chrome 1 B 326438 handle polished chrome 1 D 327014 stop polished chrome 2 E 327017 hinge left hand top/ right hand bottom polished chrome 2 F D E F 327018 hinge right hand top/ left hand bottom Installation polished chrome 2 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625 281
Accessories Lockable Knob BMB system compatable can be used with lock core for locking can be used as a knob non locking also available as plain screw on knob stainless steel finish 326856 S 326856 lockable stainless steel 20 Rosette cylinder rosette for 19mm bore holes 326810 nickel plated 20 Striker Plates metal lock strikers door use with drawer door and cam locks 426270 14mm fixing centres 426272 28mm fixing centres A S A B C 426270 20 13 8 nickel plated 20 426272 37 13.5 8 nickel plated 20 426270 426272 C B 282 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625
Accessories Stop Plate for use with double doors fixes to back of non locked doors allows lock housing to be set back further from the edge of the door non locked door must be closed first 326837 nickel plated 20 Recessed Striker Plate use with non rotating cam locks recessed for flush mounting 326847 nickel plated 20 Distance Shim used to help eliminate movement between back of drawer door and lock tongue black finish 326815 black 200 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625 283
Rotor Hasp Lock Rotor Hasp Lock Easy to install All components in a single pack Shackle diameter: 4 to 8mm Zinc Alloy Housing ABS Turn Knob Interchangable Right Hand Left Hand Cam Rotation 90º to 180º Suitable for padlock bolts up to 8mm in diameter S 327100 matt black 37 Bohrloch / Bore hole Ø 19mm 327101 matt silver 35 37 19 Anti Theft Security Feature The Rotor Hasp Lock has been designed so that in the event of somebody attempting to force entry without removal of the padlock the rotary knob will break free from the inner lock mechanism resulting in the latch not being able to rotate and the Locker remaining secure. In the case where forced entry has been attempted with a Rotor Hasp Lock the door can be opened by drilling straight throught the front of the internal lock mechanism with a 10mm steel drill bit; this will release the latch and allow the door to then be opened. Sollbruchstelle Predetermined Predetermined Breaking Point Friction Wafer with pressure spring Wiederstandsklammer mit Druckfeder Friction Wafer with pressure spring Konnect 25 Piece Metric Drill Set KSM3 1.0 13.0mm in 0.5 increments 135º split point cuts faster and reduced wandering Titanium Nitride Coating reduces heat and increases lubricity for extended life Fully ground precision tempered MX HSS increases drill life 284 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625
Recreational Locks FINISHED PRODUCT (A, B, C) A. Component Tener recessed push button latch and knob fitting lock body mounts on inside face of door boring through door required for knob and rosette 25mm diameter knob, suits 20mm door thickness brown plastic with brass plated knob / rosette, or matt nickel finish S A 270376 matt nickel 100 B 270379 matt nickel 100 C 270378 matt nickel 100 B. Component C. Component FINISHED PRODUCT (A, B, C) Tiera mini version of Tener 20mm diameter knob, suits 16mm door thickness brown plastic or matt nickel finish S A 270383 brown 100 A. Component A 270388 matt nickel 100 B 270387 matt nickel 100 C 270386 matt nickel 100 B. Component C. Component AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625 285
Varico Electronic Locking Device Includes: Varico control box Battery housing Battery pack (3.7V 2400mAh). Electronic Lock S VARICO CONTROL BOX exclusive to BATTERY HOUSING AND BATTERY PACK 3260661 black 3260681 silver Varico Lock Handle S 3261410 Suit BMB 180mm Modul 1000 Housing 3261420 Suit Hafele Design Symo 3000 Housing exclusive to Varico Lock Handle. Can be used with or without lock Cylinder. When using without lock cylinder, cap must be located in handle. 286 AUSTRALIA: www.artia.com.au 1800 008 591 NEW ZEALAND: 0800 267 625