MRL lift Green Lift Fluitronic

Transcription

1 Leader with more than 750,000 lifts worldwide using GMV technology MRL lift Green Lift Fluitronic * See note on page 3. Ideal solution for up to floors

2 MRL lift Green Lift Fluitronic 3 GOOD REASONS TO CHOOSE GREEN LIFT FLUITRONIC for up to floors 1. Technical advantages No noise at top floor Small shaft size required (also pit and headroom) Low seismic vulnerability years warranty Quality guaranteed by strong GMV experience acquired thanks to: Over 750,000 lifts handled by GMV technology throughout the world. Over 100 million people per day using lifts equipped with GMV technology. Production units in three continents. 3. Up to 30% saving on the total price: For the buyer of the lift. For the end users, thanks to the all inclusive maintenance costs, without extra charges. COMPARISON WITH GEARLESS MRL TRACTION LIFTS OUR FLUITRONIC GREEN LIFT COMPETITORS MRL GEARLESS TRACTION LIFTS Black out The automatic system of return to floor with door opening is very reliable (based on the force of gravity) and is already installed. Black out The automatic system of return to floor with door opening is an expensive option and often requires an auxiliary energy supply. Safety Emergency operation It is equipped with a simple and efficient rescue system, based on the force of gravity. Emergency operation The emergency operation system is more complicated and often requires an auxiliary energy supply. Low seismic vulnerability Ecology Less energy consumption during standby There are no permanent magnets There are no hung loads (the engine is in the cabinet casing and there is no counterweight). Safer and less vulnerable in the event of an earthquake. No environmental problems Ecological lift thanks to the use of biodegradable ecofluids. The absence of frequency converters permits reduced energy consumption during standby. Risk of motor malfunction due to the demagnetization of the permanent magnets. There are hung loads (engine and counterweight). The hanging loads may cause damage to the lift and to the passengers in the event of an earthquake. Environmental problems Due to the production and the disposal of the permanent magnets (with high costs). The use of the frequency converters requires high energy consumption in standby. Economy Competitive price performance being equal, spare parts are easily available on the market hence less maintenance costs. Higher maintenance costs Warranty Up to 10 years warranty GMV offers an extension of the warranty up to 10 years as proof of the quality of its products. Legal warranty Normally 2 years warranty according to the law. 2

3 HYDRAULIC OIL? NO, FLUITRONIC EcoFluid Used instead of common mineral oil. No pollution risks in the event of oil leakage. Biodegradability index > 90% in compliance with standard CEC L33A93. in compliance with Directive 200/118/EC on the environment. It is classified HEES (acceptable from an ecofriendly point of view) as per ISOUNI 7434 regulation. EcoFluid Average yearly consumption of a residential lift ( ) Average yearly consumption of a residential lift ( ) MRL traction lifts Green Lift Fluitronic Run Standby Thanks particularly to the NGV digital electronic valve and to the very efficient, non oilimmersed new power units with «dry motor», the Green Lift Fluitronic guarantees the lowest energy consumption. As you can see from the above example, the consumption of the lift running for the condominium on average does not exceed High performances NGV electronic valve with digital technology allows high ride performance, with gradual and undetected acceleration and deceleration and accurate floor levelling (± 10 mm as per EN standard concerning disabled people). NGV Valve The Green Lift Fluitronic is already designed to comply with the latest safety rules. It complies with the A3 Amendment to the EN 81.2 rules, compulsory for all Final Tests starting from 01/01/2012. * Option to extend your warranty up to 10 year. For further information, please, call the phone number on the backside. 3

4 MRL lift Green Lift Fluitronic TMC Lift Car Examples Example 1 Walls: Faced 001 Beige Structure and corners: Prepainted sheet metal (Polimod) Dark Grey Ceiling: Ceiling with irregular holes (neon) Floor: PVC 501 Light grey Mirror: Half wall Example 2 Walls: Faced 00 Cherry wood Structure and corners: Prepainted sheet metal (Polimod) Dark Grey Floor: PVC501 Light grey Example 3 Walls: Faced 005 White Structure and corners: Scotch brite stainless steel Floor: PVC 502 Dark grey Example 4 Walls: Prepainted sheet metal (Polimod) 204 Light grey Structure and corners: Prepainted sheet metal (Polimod) Dark grey Ceiling: Neon with led light pipe Floor: Coconut 02 Red Mirror: Half wall 4 Example 5 Walls: Plastic laminated 103 Whitened oak Structure and corners: Scotch Brite stainless steel Floor: PVC 502 Dark grey Example Walls: Plastic laminated 102 Wenge Structure and corners: Prepainted sheet metal (Polimod) Dark Grey Floor: Coconut 01 Natural

5 Example 7 Walls: Plastic laminated 112 Yellow ochre Structure and corners: Prepainted sheet metal (Polimod) Dark Grey Ceiling: Neon with led light pipe Floor: PVC 502 Dark grey Example 8 Walls: Plastic laminated 110 Water green Structure and corners: Prepainted sheet metal (Polimod) Dark Grey Floor: Coconut 01 Natural Without mirror Example 9 Walls: Plastic laminated 113 Blue Structure and corners: Prepainted sheet metal (Polimod) Dark Grey Floor: Coconut 02 Red Example 10 Walls: Plastic laminated 108 Dark cherry wood Structure and corners: Scotch Brite stainless steel Ceiling: Ceiling with irregular holes (neon) Floor: PVC 502 Dark grey Example 11 Walls : Plastic laminated 109 Pearl aluminium Structure and corners: Scotch Brite stainless steel Ceiling: Neon with led light pipe Floor: Coconut 02 Red Glass wall panels Example 12 Walls: Scotch Brite stainless steel Structure and corners: Scotch Brite stainless steel Floor: PVC 501 Light grey 5

6 MRL lift Green Lift Fluitronic Colours and Materials Car Panels Faced 001 Beige 004 Light grey 005 White Prepainted sheet metal (Polimod) 201 Beige 204 Light grey 205 Dark grey Plastic laminated 112 Yellow ochre 110 Water green 113 Blue 109 Pearl aluminium 10 Stone silver frost finish 111 White grey stone Glass 801 Glass Stainless steel 301 Scotch brite* 302 Checkers 303 Linen Floor coatings PVC COCONUT 501 Light grey 502 Dark grey 01 Natural coconut 02 Red coconut

7 00 Cherry wood 007 Oak 103 Whitened oak 101 Birch 107 Light cherry wood 108 Dark cherry wood 102 Wenge 104 Ebony 105 Whitened Walnut 304 Leather 305 5WL *Available in AISI 430 or AISI 304 Dotted rubber 701 Grey 702 Black 7

8 MRL lift Green Lift Fluitronic Colours & Materials Car structure and corners Prepainted sheet metal (Polimod) Stainless steel 205 Dark grey 301 Scotch brite* *Available in AISI 430 or AISI 304 Landing doors and car door panels Prepainted sheet metal (Polimod) 201 Beige 204 Light grey 205 Dark grey Glass 801 Glass Stainless steel 301 Scotch brite* 302 Checkers 303 Linen 304 Leather 305 5WL *Available in AISI 430 or AISI 304 Ceilings Ceiling with irregular holes (neon) Standard delivery Ceiling with led spot lights Neon with led light pipe 8

9 GLASS WALL PANELS Panoramic glass walls with handrail available HANDRAIL Hand rail with epoxy painted alloy alluminium junctions. Chromed steel hand rail, 30 mm diameter, complying with EN lift rules. TMC LIFT CAR (tailor made) A tailor made car, with solid but lightweight structure, providing the ideal product for low energy consumption lifts. The simple assembly system allows easy insertion of the car panels, enabling a quick and economic restyling. CAR PUSHBUTTON IN COMPLIANCE WITH EN LIFT RULES CAR PUSHBUTTON LANDING DOORS PUSHBUTTON DOORS Easy assembly and adjustment of landing doors. Doors manufactured in Prepainted sheet metal (Polimod), Scotch Brite stainless steel or antivandal stainless steel Very quiet running due to a ball bearing roller on zincplated guides to avoid paint residues. Firerated landing doors, tested in compliance with EN class E 120 EI 30 EI 0 EI 90 EI 90 EI 120 Smaller door sills available 9

10 MRL lift Green Lift Fluitronic MRLT version: All material is situated in the shaft. Ideal solution when space is very important. Remote controls to be operated outside the shaft. SHAFT SECTION FRONT VIEW (on the bottom floor) Clear door width 2000 mm Frames height 2225 mm Min. Headroom 3300 mm Reduced headroom 2750 mm Standard position of remote controls box Landing pushbutton Clear door opening 2000 mm Frames height 2225 mm Controller placed at first served level Alternative position of remote controls box SHAFT PLAN max car travel 17 m Power unit Controller A Power unit type MRLT D B Min. pit 1100 Reduced pit 450 mm Standard position of remote controls box Landing pushbutton PL C Alternative position of remote controls box Available with reduced pit and/or head room Payload [kg] N. of passengers Entrances [No.] opposite 2 opposite 1 2 opposite Car dimensions [mm] A B PL C D (*) 1100 (**) (*) 1100 (*) 1100 (*) (*) 1100 (**) (*) 1400 (*) 1400 (*) GREEN LIFT FLUITRONIC MRLT Clear door opening [mm] /850/ /850/ /850/ /850/ /850/ / /900 Min. shaft dimensions with doors opening at side [mm] /1480/ /1500/ /1480/ /1500/ Min. shaft dimensions with central doors opening [mm] C /1800/ /1800/ /1800/ /1800/ /1800/ / /1920 D Standard speed [m/s] 10 Upward Downward Attention the measurements given in the table are indicative. For any feasibility contact our technical department Max car travel 17 m Standard speeds for each payload 0,40 0,52 0,2 0,8 0,40 0,48 (***) 0,52 0,2 (***) 0,2 0,74 (***) 0,8 1,00 (***) (*) Complies with EN rules (**) Power unit placed in the shaft rear wall at the car frame side (***) Possibility of downward speed different from upward speed only with electronic valve

11 MRLMC version: SHAFT SECTION Control panel and drive unit in a cabinet to be positioned in any place at the lowest floor, in order to simplify emergency and maintenance operations. This solution is still a MRL solution, but more convenient. Clear door opening 2000 mm Door frames height 2225 mm Min headroom 3300 mm With reduced headroom 2750 mm*** Controller Hauteur Height Power unit A max car travel 19 m B D Depth Profondeur Width MACHINERY CABINET Min. pit 1100 With reduced pit 450 mm*** PL C Cabinet type Width Dimensions [mm] Depth Height Payload [Kg] B C D F Available with reduced pit and/or head room Payload [kg] Standard speed [m/s] N. of passengers Upward Downward Car dimensions [mm] GREEN LIFT FLUITRONIC MRLMC Clear door opening [mm] (*) In compliance with EN rules (**) Possibility of downward speed different from upward speed only with electronic valve. (***) For capacity loads 900/1000 kg: minimum pit 500 mm minimum headroom 2800 mm Min. shaft dimensions with doors opening at side [mm] Min. shaft dimensions with central doors opening [mm] Entrances [No.] A B PL C D C D / / / /850/ /1500/ /1800/ (*) 1250 (*) 800/850/ /1500/ /1800/ /850/ /1550/ /1850/ opposite /850/ /1500/ /1800/ opposite 1000 (*) 1250 (*) 800/850/ /1500/ /1800/ opposite /850/ /1550/ /1850/ (*) 1400 (*) 800/ / opposite 1100 (*) 1400 (*) 800/ / / / opposite / / opposite / / / / opposite / / opposite / / Attention the measurements given in the table are indicative. For any feasibility contact our technical department Max car travel: 19 m up to 30 kg 1 m for higher payloads Standard speed for each payload up to 30 kg (for other payloads call GMV Technical Office) 0,40 0,52 0,2 0,8 0,40 0,48 (**) 0,52 0,2 (**) 0,2 0,74 (**) 0,8 1,00 (**) 11

12 GMV in the World Partners Distributors* BRAZIL GMV LATINO AMERICA ELEVADORES Ltda Tel CANADA OLSNA Inc. Tel CHINA BEIJING GMV HYDRAULIC ELEVATOR COMPONENTS Co. Ltd Tel / CZECH REPUBLIC GMV MARTINI CZ s.r.o. Tel/Fax: FRANCE GMV FRANCE Tel info@gmvfrance.fr GERMANY OILDINAMIC GMV AUFZUGSANTRIEBE GmbH Tel GREECE OILIFT S.A. Tel HUNGARY ITALIFT K.F.T.* Tel/Fax INDIA Componento Manufacturing & Trading PVT.LTD. infogmvindia@gmv.it ISRAEL AMBAR FORUM INTERNATIONAL LTD* Tel ITALY TECHNOLIFT S.r.l. Tel KOREA EL TECH LTD.* Tel LEBANON NICE LIFT SARL* Tel POLAND GMV POLSKA Sp. z o.o. Tel: PORTUGAL SICMALEVA Lda Tel QATAR AL MAAMOURA LIFTS&ESCALATORS W.L.L.* Tel / tonysokhon@almaamoura.com SPAIN GMV EUROLIFT, S.A. Tel SWEDEN GMV SWEDEN AB Tel: TURKEY GMV TURKEY Tel BULUT MAKINA ASANSOR* Tel UNITED ARAB EMIRATES GULF ELEVATORS CO. L.L.C.* Tel / UNITED KINGDOM GMV (UK) Ltd Tel. 0044(0) ITALIA GMV S.p.A Pero (MI) Via Don Gnocchi, 10 Tel Fax info@gmv.it This document is for information purposes only. We reserve the right to modify the reported specifications, in any part, without notice. It is recommended that you view actual samples of car finishes, as there may be slight differences than shown in literature