Gumnut Crochet Designs from Aus

Size: px
Start display at page:

Download "Gumnut Crochet Designs from Aus"

Transcription

1 Table Top Christmas Tree Decoration Skill Level Intermediate A beginner who has access to google and u- tube, should be able to complete this project with some research into any stitches or steps which are unfamiliar Copyright Please do not sell the pattern or infer it as your own. You may use this pattern to sell any items you complete. Please refer to Gumnut Crochet as the designer. Materials Used Gauge Gauge is not critical to this project. Different yarn type and different ply will change size. Size 4 ply cotton x 50 gram dark green or light green 4 ply cotton yarn small quantity red, blue, brown, white Size 3.25 mm crochet hook Tapestry needle 16 mm safety eyes Fiberfill Stitch marker x 2 Purchased bells or beads 22 cm in height Stitches Used US Terminology Sc single crochet Fl front loops Bl back loops Ch chain 2 sc in next sc sc increase 2 hdc in next hdc increase Sc 2 tog- sc decrease Sl st slip stitch Hdc half double crochet Sc dec sc decrease Sc inc sc increase Dc double crochet Dc dec double crochet decrease Christmas Tree Page 1

2 Christmas Tree worked in continuous rounds, starting with base R1. In main colour, magic circle 6, or ch 2, sc 6 in second chain from hook R2. (2 sc in each sc) 12 sc R3. (sc in next sc, 2 sc in next sc) 18 sc R4. (sc in each of next 2 sc, 2 sc in next sc) 24 sc R5. (sc in each of next 3 sc, 2 sc in next sc) 30 sc R6. (sc in each of next 4 sc, 2 sc in next sc) 36 sc Use a stitch marker to mark the beginning of each row. It avoids having to count each multiple as well as each stitch. R7. (sc in each of next 5 sc, 2 sc in next sc) 42 sc R8. (sc in each of next 6 sc, 2 sc in next sc) 48 sc R9. (sc in each of next 7 sc, 2 sc in next sc) 54 R10. (sc in each of next 8 sc, 2 sc in next sc) 60 sc R11. (sc in each of next 9 sc, 2 sc in next sc), sl st to close round if making colour change here 66 sc If making colour change, fasten off old colour, change to new colour, ch 1 and sc in same ch space R12. in back loops only, sc in each sc 66 sc Base completed, forming sides of tree R13. Sc in each sc 66 sc R14. (Sc in each of next 20 sc, sc dec) 63 sc R15. Sc in each sc 63 sc Christmas Tree Page 2

3 R16. (sc in each of next 19 sc, sc dec) 60 sc R17. Sc in each sc 60 sc R18. (sc in each of next 18 sc, sc dec) 57 sc R19. Sc in each sc 57 sc R20. (sc in each of next 17 sc, sc dec), if making colour change, sl st to close round 54 sc If making colour change, fasten off old colour, change to new colour, ch 1 and sc in same ch 1 space R21. In back loops, sc in each sc 54 sc R22. (sc in each of next 16 sc, sc dec) 51 sc R23. Sc in each sc 51 sc R24. (sc in each of next 15 sc, sc dec) 48 sc R25. Sc in each sc 48 sc R26. (sc in each of next 14 sc, sc dec) 45 sc R27. Sc in each sc 45 sc R28. (sc in each of next 13 sc, sc dec) 42 sc R29. Sc in each sc 42 sc -R30. (sc in each of next 12 sc, sc dec) if changing colour sl st to close round 39 sc Christmas Tree Page 3

4 If making colour change, fasten off old colour, change to new colour, ch 1 and sc in same ch 1 space R31. In back loops sc in each sc 39 sc R32. (sc in each of next 11 sc, sc dec) 36 sc R33. Sc in each sc 36 sc R34. (sc in each of next 10 sc, sc dec) 33 sc R35. Sc in each sc 33 sc R36. (sc in each of next 9 sc, sc dec) 30 sc R37. Sc in each sc 30 sc R38. (sc in each of next 8 sc, sc dec) 27 sc R39. Sc in each sc 27 sc R40. (sc in each of next 7 sc, sc dec) 24 sc R41. Sc in each sc 24 sc R42. (sc in each of next 6 sc, sc dec) 21 sc Insert Eyes 8 sc apart R43. Sc in each sc 21 sc R44. (sc in each of next 5 sc, sc dec) 18 sc Christmas Tree Page 4

5 R45. Sc in each sc 18 sc R46. (sc in each of next 4 sc, sc dec) 15 sc R47. Sc in each sc 15 sc R48. (Sc in each of next 3 sc, sc dec) 12 sc R49. Sc in each sc 12 sc R50. (sc in each of next 2 sc, sc dec) 9 sc R51. (sc in each sc, sc dec) 6 sc R51. Fasten off, close, gap, weave in ends Tree Edging R1. Holding piece upside down, sl st into any front loop from R R R. Ch 2, 7 dc in same st, (skip 2, 8 dc in next st) repeat to end Fasten off, weave in ends Nose in red R1. Ch 2, 6 sc in second chain from hook, or magic circle 6 6 sc R2. (sc in next 2 sc, 2 sc in next sc) 8 sc R3. Sc in each sc 8 sc R4. (sc in next 3 sc, 2 sc in next sc) 10 sc Christmas Tree Page 5

6 R5. Sc in each sc 10 sc Fasten off, leaving long tail to sew nose to tree. Weave in ends. Mitten and Arm (Make 2) Thumb Rd1. Rd2. Ch 2, 4 sc in second chain from hook, or magic circle 4 sc 4 sc Sc in each sc 4 sc Fasten off, leaving long tail Glove Rd1. Ch 4, sc in second chain from hook, sc in each of the next 2 sc, 3 sc in next sc, continuing on opposite side of foundation chain, sc in each of the next 2 sc, 3 sc in next sc 10 sc Rd2-3. Sc in each sc 10 sc Joining Thumb to Glove Rd4. Sc thumb to glove, sc 4 sc around thumb, join to glove again with sc, sc around glove 14 sc Rd5. Sc in each sc - 14 sc Rd6. (Sc in each of next 5 sc, sc 2 tog) 12 sc Rd7. (Sc in next sc, sc 2 tog) sc 8 Rd8. Sc in each sc - 8 sc Fasten off white, in arm colour, Rd10. In back loops, sc in each sc 8 sc Rd Sc in each sc - 8 sc Christmas Tree Page 6

7 Fasten off leaving long tail to sew to body. Fill, without stretching stitches, leaving top off arm loosely filled. Sew to body Boots make 2 in red yarn R1. Ch 8, sc in second chain from hook, sc in each of the next 5 sc, 3 sc in next sc, continuing on opposite side of foundation chain, sc in each of the next 6 sc, 3 sc in next sc 18 sc R2. 2 sc in next sc, sc in each of next 6 sc, 2 sc in each of next 3 sc, sc in each of next 6 sc, 2 sc in last 2 sc 24 sc R3. 2 sc in next sc, sc in each of next 7 sc, (2 sc in next sc, sc in next sc) x 2, 2 sc in next sc, sc in each of next 8 sc, 2 sc in next sc, sc in next sc, 2 sc in next sc 30 sc R4. Sc in each sc 30 sc R5. Sc in back loops 30 sc If changing colour for R6, sl st to close round. Do not fasten off red. Sl st blue yarn, ch 1 and sc into same ch space. At end of R6, sl st to close round, fasten off blue, sl st red yarn, ch 1, sc into same ch space. R6-9. Sc in each sc. 30 sc R10. In back loops sc in each of next 8 sc, (sc2 tog) x 6, sc in each of next 10 sc 24 sc R11. Sc in each of next 7 sc, (sc 2 tog) x 4, sc in each of next 7sc, sc 2 tog, 19 sc R Sc in each sc 19 sc Fasten off leaving a long tail to sew piece to base of tree. Fill lightly, whip stitch edges together, sew to tree Christmas Tree Page 7

8 Boot Edge R1. Sl st into any front loop from R5, sc in each front loop 30 sc Fasten off, weave in ends, decorate with bow or button, or leave as is. Hat R1. Ch 2, 6 sc in second chain from hook, or magic circle 6 6 sc R2. Sc in each sc - 6 sc R3. (Sc in each of next 2 sc, 2 sc in next sc) 8 sc R4-5. Sc in each sc 8 sc R6. (Sc in each of next 3 sc, 2 sc in next sc) 10 sc R7-8. Sc in each sc 10 sc R9. (Sc in each of next 4 sc, 2 sc in next sc) 12 sc R Sc in each sc 12 sc R13. (Sc in each of next 5 sc, 2 sc in next sc) 14 sc R Sc in each sc 14 sc R16. (Sc in each of next 6 sc, 2 sc in next sc) 16 sc R Sc in each sc 16 sc R19. (Sc in each of next 7 sc, 2 sc in next sc) 18 sc R20-21 Sc in each sc - 18 sc R22. (Sc in next 2 sc, 2 sc in next sc), sl st to close round for colour change 24 sc R23. With contrast yarn, ch 1, sc in same ch space, sc in each sc 24 sc To put a roll on the edge, complete another 4 row in contrast yarn and roll up. Pompom in contrast colour R1. Ch 2, 6 sc in chain or do magic circle with 6 sc 6 sc R2. (Sc in next 2 sc, 2 sc in next) 8 sc Christmas Tree Page 8

9 R3. (Sc in next 3 sc, 2 sc in next sc) 10 sc R4. (Sc in next 4 sc, 2 sc in next sc) - 12 sc R5. (Sc in next 4 sc, sc 2 tog) 10 sc R6. (Sc in next 3 sc, sc 2 tog) 8 sc R7. (Sc in next 2 sc, sc 2 tog) 6 sc Fill lightly R8. (Sc 2 tog) Fasten off, leaving long tail, weave in ends, sew to top of hat Christmas Stocking R1. Ch 4, sc second chain from hook, sc in next ch, 3 sc in next ch, turn working in foundation ch, sc in each of next 2 sc, 3 sc in last 10 sc R2. Sc in each sc 10 sc R3. Sc in next sc, (sc 2 tog) x 2, sc in each o f next 5 sc - 8 sc R4. Sc in next sc, (sc 2 tog) x 2, sc in each of next 3 sc 6 sc R5-8. Sc in each sc - 6 sc In last sc, sl st tog to close round for colour change. Fasten off yarn. In white, ch 1, sc in same ch R9. In white, sc in each sc 6 sc Fasten off, weave in end. Sew to tree. Sew on some balls or bells as desired Christmas Tree Page 9

Gumnut Crochet Designs from Aus

Gumnut Crochet Designs from Aus Easter Chicken For toys, its best to use a smaller hook size than yarn normally suggests in order to keep the stitches close and reduce stuffing showing Skill Level Intermediate to advanced. Copyright

More information

Gumnut Crochet Designs from Aus

Gumnut Crochet Designs from Aus Platypus with some research into any stitches or steps which are unfamiliar Copyright Please do not sell the pattern or infer it as your own. You may use this pattern to sell any items you complete. Please

More information

Rose Quartz. Abbreviations. Necessary Materials. Head. Pattern by Erica Knorr

Rose Quartz. Abbreviations. Necessary Materials. Head. Pattern by Erica Knorr 1 Rose Quartz Pattern by Erica Knorr Abbreviations Ch chain Sc single crochet Hdc half double crochet Dc double crochet Sc2tog single crochet two together 4 dc-cl four double crochet cluster stitch St

More information

Furls. Amigurumi Birds. Crochet. designed by Brenna Eaves

Furls. Amigurumi Birds. Crochet. designed by Brenna Eaves Furls Crochet Amigurumi Birds designed by Brenna Eaves Three Birds with One Pattern This Amigurumi Bird pattern will include the instructions for three styles of birds: an English Robin, a Northern Cardinal

More information

Doily Pumpkin. By Kristin Baird

Doily Pumpkin. By Kristin Baird Doily Pumpkin By Kristin Baird So, the inspiration for this little ditty, came from a doily pattern I found using the pineapple stitch. I had to modify the pattern quite a bit to make the shape I was looking

More information

#C2CTemperatureBlanket #itsallinanutshell

#C2CTemperatureBlanket #itsallinanutshell C2C Blanket #C2CBlanket #itsallinanutshell Pattern Version 5 a design by Esther Dijkstra Version Control Version 5 Document merged with temperature chart and year removed. Version 4 Changed point at which

More information

Braided Cable Handle Tote by Amanda Silveira for Amybelbags

Braided Cable Handle Tote by Amanda Silveira for Amybelbags An easy tote with braided cables that continue into the handles. A perfect first cable or felting project. Available in three sizes! Finished Sizes: Large: 13 wide x 9-1/2 high x 3 deep. Handle height

More information

INSTALLATION GUIDE MANUAL SHADE

INSTALLATION GUIDE MANUAL SHADE PRODUCT OVERVIEW 6 7 8 9 10 11 12 5 4 3 2 1 3" Fascia 1. Idle End Plug 2. Shade Band 3. Clutch 4. 3" Fascia Bracket 5. 3" Fascia Bracket Cover 6. 3" Chain Diverter 7. 3" Chain Diverter Cover (required

More information

INSTALLATION INSTRUCTIONS www.collegehillshonda.com Accessory FULL NOSE P/N 08P35-SVA-100B Application 2009 CIVIC 2-DOOR Si Publications No. AII 40334 Issue Date SEP 2008 Put this information in the glove

More information

Skyline 4 Fascia Fabrication & Installation Instructions

Skyline 4 Fascia Fabrication & Installation Instructions Components Needed Page 2 Tools Needed Page 2 System Diagram Page 3 Instructions Step 1: Install Brackets Page 4 Step 2: Install Pre-assembled Shade Page 4 Step 3: Install Fascia Clip Page 4 Step 4: Cut

More information

WARNING!! C-659 SUBKIT FIGURE 4

WARNING!! C-659 SUBKIT FIGURE 4 '0-'0 DODGE / TON TRUCKS '03-' DODGE 3/ & TON TRUCKS (WILL FIT /, 3/ & TON MEGA CAB SHORT BED) WARNING!! BRAKE, FUEL, AND ELECTRICAL LINES MAY NEED TO BE LOOSENED OR REPOSITIONED TO PROVIDE CLEARANCE FOR

More information

Adjusting Carbs For Re-Jetting (Procedure written for an Intruder 1500 LC) NEWLY UPDATED: APRIL 2003

Adjusting Carbs For Re-Jetting (Procedure written for an Intruder 1500 LC) NEWLY UPDATED: APRIL 2003 SECTION ONE: Get Prepared - Tools Adjusting Carbs For Re-Jetting (Procedure written for an Intruder 1500 LC) NEWLY UPDATED: APRIL 2003 Courtesy of: Half-Crazy Get a manual impact driver (the kind you hit

More information

VR482 Hay Rake OPERATOR & PARTS MANUAL. Last Updated: May 12, 2014

VR482 Hay Rake OPERATOR & PARTS MANUAL. Last Updated: May 12, 2014 VR482 Hay Rake OPERATOR & PARTS MANUAL Last Updated: May 12, 2014 Bridgeview Manufacturing Inc. P.O. Box 4 Gerald, SK S0A 1B0 (306) 745-2711 www.bridgeviewmanufacturing.com bmi@sasktel.net Your Authorized

More information

ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time.

ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. T E C H N I C A L B U L L E T I N BEFORE INSTALLING BELT Omni-Pro

More information

PARTS CATALOGUE FOR KH-970 KNITTING MACHINE. Note: Parts marked * are new for KH-970 And not interchangeable with other models.

PARTS CATALOGUE FOR KH-970 KNITTING MACHINE. Note: Parts marked * are new for KH-970 And not interchangeable with other models. PARTS CATALOGUE FOR KH-970 KNITTING MACHINE Note: Parts marked * are new for KH-970 And not interchangeable with other models. PARTS FOR CARRIAGE UPPER PART Ref. No. Parts No. Description Revised Q ty

More information

TYPE 4 BEARING INSTALLATION IN COMPOSITE HULLS.

TYPE 4 BEARING INSTALLATION IN COMPOSITE HULLS. TYPE 4 BEARING INSTALLATION IN COMPOSITE HULLS. Our tapered Type 4 bearings designed to be installed with our GRP housings These bearings and housings are available in two mounting styles, designed to

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory FULL NOSE P/N 08P35-TS8-100 Application 2013 CIVIC 2-DOOR Publications No. AII 13062 Issue Date NOV 2012 Put this information in the glove box with the vehicle owner

More information

Installation Service INSTRUCTIONS

Installation Service INSTRUCTIONS Installation Service INSTRUCTIONS type 4 rudder bearings Aluminium hull : p2 Composite hull : p3 Instructions for both versions : p4to 13 TYPE 4 BEARING INSTALLATION IN METAL HULLS For a new installation

More information

INSTALLATION MANUAL COUPLED SHADE PRODUCT OVERVIEW. 1. Idle End Shade

INSTALLATION MANUAL COUPLED SHADE PRODUCT OVERVIEW. 1. Idle End Shade INSTALLATION MANUAL COUPLED SHADE PRODUCT OVERVIEW 1. Idle End Shade 4 3 2 2. Intermediate Bracket 3. Drive End Shade 4. Clutch 5. Stop Bead (attached in field) 6. Stainless Steel Bead Chain 1 7. Chain

More information

Specifications Application For medium materials For heavy materials For extra heavy materials

Specifications Application For medium materials For heavy materials For extra heavy materials LT2 B875 Mark II Twin Needle Needle Feed Split Needle Bar Lock stitcher with Large Hook (and Thread Trimmer) Specifications 3 5 7 Application For medium materials For heavy materials For extra heavy materials

More information

Rekluse Motor Sports. The z-start Clutch GAS GAS. 200, 250, and strokes. 400 and strokes

Rekluse Motor Sports. The z-start Clutch GAS GAS. 200, 250, and strokes. 400 and strokes Rekluse Motor Sports The z-start Clutch GAS GAS 200, 250, and 300 2-strokes 400 and 450 4-strokes Installation Guide Copyright 2002-2004 Rekluse Motor Sports z-start Revision 3.000 RMS100 Gas Gas z-start

More information

PERFORMANCE HOOD VENTS CONTENTS: Left Side Hood Vent (1) Right Side Hood Vent (1) Mounting Bracket, Inner (2) Mounting Bracket, Outer (2) OE Hood Temp

PERFORMANCE HOOD VENTS CONTENTS: Left Side Hood Vent (1) Right Side Hood Vent (1) Mounting Bracket, Inner (2) Mounting Bracket, Outer (2) OE Hood Temp CONTENTS: Left Side Hood Vent (1) Right Side Hood Vent (1) Mounting Bracket, Inner (2) Mounting Bracket, Outer (2) OE Hood Template (1) HARDWARE: Mounting Bracket, Inner X 2 Phillips Screw X 8 Mounting

More information

Standard Lockers Series Double Tier Installation Instructions

Standard Lockers Series Double Tier Installation Instructions Thank you for selecting Salsbury s standard double tier lockers. These instructions are intended to assist you in assembling the lockers. Note that a 6 feet high locker is shown. Hole locations on the

More information

1-3/8 Designer Metals Telescoping Traversing Rod Installation Instructions

1-3/8 Designer Metals Telescoping Traversing Rod Installation Instructions 1-3/8 Designer Metals Telescoping Traversing Rod Installation Instructions Please read and follow all installation instructions provided for proper operation and enjoyment of your new drapery hardware

More information

USE THE PARTS LIST BELOW TO MAKE SURE YOUR KIT IS COMPLETE BEFORE INSTALLATION. IF ANY PIECES ARE MISSING, PLEASE CONTACT:

USE THE PARTS LIST BELOW TO MAKE SURE YOUR KIT IS COMPLETE BEFORE INSTALLATION. IF ANY PIECES ARE MISSING, PLEASE CONTACT: 1947-1954 Chevy Truck Coil-Spring Front End Tech line: 1-855-693-1259 www.totalcostinvolved.com Read and understand these instructions before starting any work! USE THE PARTS LIST BELOW TO MAKE SURE YOUR

More information

Piping Cord & Pins SECTION P. Piping Cord, Upholstery & Carpet Sundries. Castors, Miscellaneous products & Display Material

Piping Cord & Pins SECTION P. Piping Cord, Upholstery & Carpet Sundries. Castors, Miscellaneous products & Display Material Piping Cord & Pins Piping Cord, Upholstery & Carpet Sundries Castors, Miscellaneous products & Display Material SECTION P Pins & Tacks UPHOLSTERY PINS and TACKS 1533 1534 1815 1097 1533 2 PRONG ANTIMACASSAR

More information

PART# Tri-Valve Exhaust For SL 17 A/B, 17 K, KM 37 & KMB 18/28 Band Masks

PART# Tri-Valve Exhaust For SL 17 A/B, 17 K, KM 37 & KMB 18/28 Band Masks Tools needed: Medium size flat blade screwdriver PART# 525-752 Tri-Valve Exhaust For SL 17 A/B, 17 K, KM 37 & KMB 18/28 Band Masks Inch Pound Torque screwdriver with medium size flat blade Small cutting

More information

Contents. Section 5: Adjustments Ball Detect Adjustment Transport Band Tension Adjustment

Contents. Section 5: Adjustments Ball Detect Adjustment Transport Band Tension Adjustment Contents Section 5: Adjustments... 5-3 1. Ball Detect Adjustment... 5-3 2. Transport Band Tension Adjustment... 5-5 3. Transport Band Drive Belt Tension Adjustment... 5-7 4. Ball Cushion Adjustment...

More information

Raxiom Factory GPS Rear Back-up Camera Kit (07-17 Wrangler)

Raxiom Factory GPS Rear Back-up Camera Kit (07-17 Wrangler) Raxiom Factory GPS Rear Back-up Camera Kit (07-17 Wrangler) Installation Time: 2.5-3Hrs Tools Required: 7mm Socket & Driver 10mm Socket 10mm Open end wrench Knife / Razor blade Zip-ties Wire Cutters Needle

More information

TONNEAU INSTALLATION GUIDE

TONNEAU INSTALLATION GUIDE TONNEAU INSTALLATION GUIDE Warranty, Care & Maintenance EASY AS 1-2-3! NORMAL INSTALLATION TIME 30 MINUTES For Warranty Issues, Contact UnderCover Directly (866) 900-8800 www.undercoverinfo.com Page 1

More information

SLIMRACK SLIDE-OUT MOTOR AND DRIVE BLOCK REPLACEMENT

SLIMRACK SLIDE-OUT MOTOR AND DRIVE BLOCK REPLACEMENT SLIMRACK MOTOR AND DRIVE BLOCK Purpose This document provides instructions on replacing the motor and drive block installed on a SlimRack Slideout system. Safety Read all instructions and safety labels

More information

CUSTOM PRODUCTS INDEX

CUSTOM PRODUCTS INDEX 5/17-50 CUSTOM PRODUCTS INDEX Product Draperies Swags Board Mounted Valances Rod Mounted Valances Cornices Soft Shades Bedding and Accessories Pages D-1 - D-202 SC-1 - SC-27 VB-1 - VB-38 VR-1 - VR-31 C-1

More information

Sewing. Simply FRESH IDEAS WITH FABRIC. transform it. floral accessories. transform it. cat toy. school essentials. saddle bag

Sewing. Simply FRESH IDEAS WITH FABRIC. transform it. floral accessories. transform it. cat toy. school essentials. saddle bag Simply Sewing FRESH IDEAS WITH FABRIC HOW TO PRINT THIS PATTERN Print out this 30-page PDF on to A4 paper. Trim away the shaded border from each page and position the pages as below to assemble the pattern

More information

Product information on Audi Genuine Accessories

Product information on Audi Genuine Accessories Audi Genuine Accessories Product information on Audi Genuine Accessories Audi A5 Coupé 27.02.2008 Information subject to change Page 1 Contents page Sport and design...3 Front spoiler with blade...3 Rear

More information

SEAT COVER INSTALLATION MANUAL

SEAT COVER INSTALLATION MANUAL SEAT COVER INSTALLATION MANUAL for Bucket Seats Step 1 Headrest Removal Headrests need to be removed prior to installation of the seat cover. Most headrests remove by pressing the adjustment button located

More information

Stitch a beautiful wrist corsage with seed beads and Tila beads

Stitch a beautiful wrist corsage with seed beads and Tila beads NETTING / BEAD WEAVING Aster raelet Stith a eautiful wrist orsage with seed eads and Tila eads designed y Dawn Arnote Tila spokes form petals rising from a netted ase in this statement raelet. FCT-SC-010917_10

More information

Rekluse Motor Sports. The z-start Clutch CRF 250X. Installation Guide Copyright 2002 Rekluse Motor Sports z-start Revision RMS116 CRF 250X

Rekluse Motor Sports. The z-start Clutch CRF 250X. Installation Guide Copyright 2002 Rekluse Motor Sports z-start Revision RMS116 CRF 250X Rekluse Motor Sports The z-start Clutch CRF 250X Installation Guide Copyright 2002 Rekluse Motor Sports z-start Revision 3.000 RMS116 CRF 250X 191-216 Manual Revision: 103105 Rekluse Motor Sports, inc.

More information

2 Wild Dog 4x4 (Pty) Ltd. Other Accessories

2 Wild Dog 4x4 (Pty) Ltd. Other Accessories 2 Wild Dog 4x4 (Pty) Ltd. Other Accessories Wild Dog 4x4 Soft Shackle Stock Code Length open Inner Length WLL /SWL Break Load (mm) Closed (mm) (Tonnes) (Tonnes) WDSE010004 530 200 1 4 WDSE010006 590 200

More information

ARDUINO 2WD SMART ROBOT CAR KIT

ARDUINO 2WD SMART ROBOT CAR KIT EN ARDUINO 2WD SMART ROBOT CAR KIT P a g e 2 PARTS LIST Please make sure that the following pieces are included in your kit Component Quantity Remarks Arduino Sensor Shield v5.0 1 Align pins using needle

More information

Christmas time is here bracelet word chart

Christmas time is here bracelet word chart Christmas time is here bracelet word chart IF YOU PREFER A WORD CHART TO A GRAPH FOR PEYOTE BANDS, THIS IS FOR YOU! By Karen Bruns Supplies Bracelet 6 in. (17.1 cm) 110 Miyuki Delica cylinder beads»» 1

More information

USE THE PARTS LIST BELOW TO MAKE SURE YOUR KIT IS COMPLETE BEFORE INSTALLATION. IF ANY PIECES ARE MISSING, PLEASE CONTACT:

USE THE PARTS LIST BELOW TO MAKE SURE YOUR KIT IS COMPLETE BEFORE INSTALLATION. IF ANY PIECES ARE MISSING, PLEASE CONTACT: 1953-1956 Ford Truck Coil-Spring Front End Tech Line: 1-855-693-1259 www.totalcostinvolved.com Read and understand these instructions before starting any work! USE THE PARTS LIST BELOW TO MAKE SURE YOUR

More information

WOC & WOC Top & Back Installation Instructions

WOC & WOC Top & Back Installation Instructions Shown with optional Sun Roof WOC-900500-2 & WOC-900501-2 Top & Back Installation Instructions Install Order! Heater Door System Wiper on to Windshield Windshield Rear Panel Top Panel Tools needed: 5/16

More information

Rekluse Motor Sports. The z-start Clutch LTR 450. Installation Guide Copyright 2002 Rekluse Motor Sports z-start Revision 3.

Rekluse Motor Sports. The z-start Clutch LTR 450. Installation Guide Copyright 2002 Rekluse Motor Sports z-start Revision 3. Rekluse Motor Sports The z-start Clutch LTR 450 Installation Guide Copyright 2002 Rekluse Motor Sports z-start Revision 3.000 RMS166 LTR 450 191-266 Manual Revision: 032306 Rekluse Motor Sports, inc. 110

More information

Self-Stabilizing Hand Truck Table of Contents:

Self-Stabilizing Hand Truck Table of Contents: ASSEMBLY INSTRUCTIONS Self-Stabilizing Hand Truck Table of Contents: Parts List... 2 Assembly Instructions...3-6 For safe, efficient product use, Magline recommends inspecting equipment regularly and replacing

More information

Installation Instructions

Installation Instructions Roller & Roman Shades Lifting Systems Cassette and Sure-Lift EZ Lift Cordless EZ Pull Standard and Cassette R-Series Clutch SL-Series Clutch Spring Roller Fascias and Valances 3, 4 Flat and 4 Curved Fascia

More information

Assembly Instructions. General Information. Installation Instructions. 12, 15 and 20 Series Drill Small Seeds Option. Used with:

Assembly Instructions. General Information. Installation Instructions. 12, 15 and 20 Series Drill Small Seeds Option. Used with: Installation Instructions! Used with: 1200, 1210 and 1220 Drills 1500, 1510 and 1520 Drills 2000, 2010 and 2020 Drills 12, 15 and 20 Series Drill Small Seeds Option When you see this symbol, the subsequent

More information

Seat Cover Installation for Bucket Seats

Seat Cover Installation for Bucket Seats for Bucket Seats Step 1 Headrest Removal Headrests need to be removed prior to installation of the seat cover. Most headrests remove by pressing the adjustment button located at the base of the post (Figure

More information

S Q UA R E T U B E T R A I L E R J A C K OWNER S MANUAL

S Q UA R E T U B E T R A I L E R J A C K OWNER S MANUAL S Q UA R E T U B E T R A I L E R J A C K OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may

More information

Roller Shade Installation Instructions

Roller Shade Installation Instructions Roller Shade Installation Instructions Standard Installation p - 2 - Cordless Installation p - 6 - Cassette Installation p - 10- Motorization Solar Panel Installation p - 12 - Motorization Remote Control

More information

INSTRUCTION MANUAL FOR DODGE GRID-LIGN FLEXIBLE COUPLINGS

INSTRUCTION MANUAL FOR DODGE GRID-LIGN FLEXIBLE COUPLINGS INSTRUCTION MANUAL FOR DODGE GRID-LIGN FLEXIBLE COUPLINGS Sizes 1020-1140 T10 (Close Coupled, Horizontally Split Cover) T20 (Close coupled, Vertically Split Covers) T31 (Full Spacer ) T35 (Half Spacer

More information

Figure 8-1. Frame and External Parts - Coil Chain Models.

Figure 8-1. Frame and External Parts - Coil Chain Models. Figure 8-1. Frame and External s - Coil Chain Models. Ref. Quantity Required 1/4 Ton 1/2 Ton 1 Ton 1 BAH-105 Bolt - Suspension Bracket 2 2 2 2 BAH-108 Lockwasher - Shakeproof, External 2 2 2 3 BAH-107

More information

Installation of the Toyota Celica TWM Performance Short Throw Shift Kit Plastic Shifter Assembly

Installation of the Toyota Celica TWM Performance Short Throw Shift Kit Plastic Shifter Assembly Installation of the 1992-1993 Toyota Celica TWM Performance Short Throw Shift Kit Plastic Shifter Assembly Page 1 1. Remove the stock shift knob and boot cover 2. Carefully slide an exacto knife under

More information

Service Information Chevrolet Camaro 3.6L LFX Engine. Camshaft Position Actuator Replacement - Bank 1. Document ID:

Service Information Chevrolet Camaro 3.6L LFX Engine. Camshaft Position Actuator Replacement - Bank 1. Document ID: Service Information 2014 Chevrolet Camaro 3.6L LFX Engine Camshaft Position Actuator Replacement - Bank 1 Document ID: 2900815 Special Tools Removal Procedure EN49982-1 Timing Chain Retainer EN49982-2

More information

LEXUS RX350/450h TOWING HITCH Preparation. Part Number: PT General Applicability All Vehicles with tow package

LEXUS RX350/450h TOWING HITCH Preparation. Part Number: PT General Applicability All Vehicles with tow package Preparation Part Number: PT228-48210 Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Hitch 2 1 Trailer Hitch Plug 3 1 LH Mounting Bracket 4 1 RH Mounting Bracket General Applicability All Vehicles

More information

Installation Instructions

Installation Instructions Instructions Created by an: Revised 7-11-17 LRT 2005-2017 3/1 Leveling/ Lift Kit for Toyota Tacoma by Low Range Off-Road (SKU# LR-LRTACO) Installation Instructions Suggested Tools: CAUTION: Safety glasses

More information

TOYOTA FJ CRUISER PERFORMANCE SHOCKS Preparation Adjustable Pole Jack

TOYOTA FJ CRUISER PERFORMANCE SHOCKS Preparation Adjustable Pole Jack Preparation Part Number: Adjustable Pole Jack PTR13-35100/Front PTR13-35101/Rear Kit Contents: Item # Quantity Reqd. Description 1 1 Front or Rear TRD Off-Road Shock Assy (w/ Dust Cover) 2 1 Cotter Pin

More information

GrilleGuy.com, LLC. Installation Instructions and Care guide : Scion tc : Honda S2000 : Honda Civic

GrilleGuy.com, LLC. Installation Instructions and Care guide : Scion tc : Honda S2000 : Honda Civic Installation Instructions and Care guide : 2005 2009 Scion tc : 2000 2003 Honda S2000 : 2004 2005 Honda Civic Thanks again for purchasing your custom grille insert from the GrilleGuy. The following are

More information

Replace-a-Top. Installation Instructions. 60th Anniversary Top INSTALLATION TIME SKILL LEVEL TOOLS. Vehicle Application:

Replace-a-Top. Installation Instructions. 60th Anniversary Top INSTALLATION TIME SKILL LEVEL TOOLS. Vehicle Application: Installation Instructions Replace-a-Top 60th Anniversary Top Vehicle Application: Jeep Wrangler CJ5 1976 1983 Part Number: 51117 Fits the OEM bows and door frames. www.bestop.com - We re here to help!

More information

Installation Manual TWM Performance Kia Forte Short Shifter

Installation Manual TWM Performance Kia Forte Short Shifter Installation Manual TWM Performance Kia Forte 2009+ Short Shifter Begin the installation by parking on a flat surface, as you will have to engage and disengage the hand brake and shift from gears to neutral.

More information

12 Electricity and Circuits

12 Electricity and Circuits 12 Electricity and Circuits We use electricity for many purposes to make our tasks easier. For example, we use electricity to operate pumps that lift water from wells or from ground level to the roof top

More information

Continuous Cord Loop Designer Series Roller Shades

Continuous Cord Loop Designer Series Roller Shades Shade Maintenance Leveling a Crooked Shade 1. Pull down shade until roller is exposed. Do not pull further to avoid pulling cloth off roller. 2. Stick a 5" strip of masking tape into the roller at opposite

More information

205 Gti Covers & Trim Let us be seated

205 Gti Covers & Trim Let us be seated 205 Gti Covers & Trim Let us be seated Owner & Proprietor. David C Hickman This is the general price list for the items offered by us. (Rev. 16, amended 4/7/18) It is provisional and may be subject to

More information

Rekluse Motor Sports. The z-start Clutch. Cannondale

Rekluse Motor Sports. The z-start Clutch. Cannondale Rekluse Motor Sports The z-start Clutch Cannondale Installation Guide Copyright 2002-2004 Rekluse Motor Sports z-start Revision 3.000 RMS105 Cannondale 191-205 Manual Revision: 091304 Rekluse Motor Sports,

More information

STANTON 120 DUTCH ROLL. If you are missing any of the following items, please contact Stanton Video immediately (602)

STANTON 120 DUTCH ROLL. If you are missing any of the following items, please contact Stanton Video immediately (602) STANTON 0 DUTCH ROLL If you are missing any of the following items, please contact Stanton Video immediately (60) 9-9505. Cradle. Trolley. Dovetail. Servo 5. Tilt Shaft 6. Safety Clips () 7. Ladder Chain

More information

SunStar Lockstitch Industrial Sewing Machines

SunStar Lockstitch Industrial Sewing Machines SunStar Lockstitch Industrial Sewing Machines Electronic and Programmable Sewing Machines: - SunStar SPS/A(B) 1306/1507/1310 Electronic Pattern Sewing Machine - SunStar SPS E-1507 Electronic Pattern Sewing

More information

Installation instructions

Installation instructions Service Installation instructions Audi A3 (8V3) 2012 Roof bars 8V3.071.126 for vehicles with bright moulding package (PR no. 4ZB) and roof bars 8V3.071.126.L for vehicles with black moulding package (PR

More information

Thermal Wraps. GT Exhaust Accessories Installation and Operation Manual. Rev. A. Copyright 2012 GT Exhaust, Inc. All Rights Reserved

Thermal Wraps. GT Exhaust Accessories Installation and Operation Manual. Rev. A. Copyright 2012 GT Exhaust, Inc. All Rights Reserved Thermal Wraps GT Exhaust Accessories Installation and Operation Manual Rev. A Copyright 2012 GT Exhaust, Inc. All Rights Reserved Published: December 20, 2012 NOTICE The instructions herein must be expressly

More information

Responsible Unit: Facilities Management

Responsible Unit: Facilities Management Policy Sponsor: Assistant Vice President Approval Date: January 2010 Mobile Overhead Cranes Safe Work Instructions Responsible Unit: Revisions: Service: Trade Services Shop: Mechanical & Welding Hazards

More information

Parts. STUB ROLL SUPPORTS (x2) come with XT10SCA XT10SCA XT10SCA. SCA STUB ROLL TRANSFER KIT (inc. Stub Roll Supports and Transfer Arm)

Parts. STUB ROLL SUPPORTS (x2) come with XT10SCA XT10SCA XT10SCA. SCA STUB ROLL TRANSFER KIT (inc. Stub Roll Supports and Transfer Arm) Parts : H21 System: 84TR (smoke) Dispenser Dimensions HxWxD (Inches): 15.5 x 12.94 x 9.25 (39.37 x 32.87 x 23.50 cm) Roll Towel Product Options: RB350A (Tork Advanced, 350, White) RB425 (Tork Advanced,

More information

SGS India Private Limited, Consumer Testing Services-Laboratory, No. 134, 2 nd Floor, Sivashakthi Nagar, College Road, Tirupur, Tamil Nadu

SGS India Private Limited, Consumer Testing Services-Laboratory, No. 134, 2 nd Floor, Sivashakthi Nagar, College Road, Tirupur, Tamil Nadu Last Amended on 03.12.2015 Page 1 of 7 I. TEXTILE MATERIALS 1. Yarn) Linear Density SO-IN-CTS-C02-QU-001 (Version 3.2) ASTM D1907/D1907 M-12 ASTM D 1059: 2001 ISO 7211-5: 1984 BS ISO 7211-5: 1984 ISO 2060:

More information

3500-LB. TRAILER JACK OWNER S MANUAL

3500-LB. TRAILER JACK OWNER S MANUAL 3500-LB. TRAILER JACK OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious

More information

Cargo Control. Tie Down Straps & Transport Chain

Cargo Control. Tie Down Straps & Transport Chain Cargo Control Tie Down Straps & Transport Chain CARGO CONTROL WARNINGS & INFORMATION Quality assurance and general information: We at Super Slings Inc. offer a full line of ratchet straps, tie downs, e-track

More information

TOYOTA FJ CRUISER OFF-ROAD SHOCKS Installation Preparation

TOYOTA FJ CRUISER OFF-ROAD SHOCKS Installation Preparation Installation Preparation Part Number: PTR13-35060 - Front PTR13-35061 - Rear Kit Contents Item # Quantity Reqd. Description 1 1 Front or Rear TRD Off-Road Shock Assy (w/ Dust Cover) 2 1 Cotter Pin Front

More information

CAUTION. INSTALLATION INSTRUCTIONS Part Number Hidden Winch Kit with special XD 9000 Short Drum Winch For Ford F-150 Truck

CAUTION. INSTALLATION INSTRUCTIONS Part Number Hidden Winch Kit with special XD 9000 Short Drum Winch For Ford F-150 Truck INSTALLATION INSTRUCTIONS Part Number 69110 Hidden Winch Kit with special XD 9000 Short Drum Winch For Ford F-150 Truck As you read these instructions, you will see NOTES, CAUTIONS and WARNINGS. Each message

More information

GO! Qube 8" Something's Fishy Beach Bag Finished Size: 16½" x 23" x 4" (excluding handles)

GO! Qube 8 Something's Fishy Beach Bag Finished Size: 16½ x 23 x 4 (excluding handles) GO! Qube 8" Something's Fishy Beach Bag Finished Size: 16½" x 23" x 4" (excluding handles) For use with GO! Qube Mix & Match 8" Block (55776) Fabrics are from the Cotton Couture Solids and Pets a Plenty

More information

Installation instructions for Alpha Racing Quickshifter/Blipper for a pre-2014 S1000RR

Installation instructions for Alpha Racing Quickshifter/Blipper for a pre-2014 S1000RR Skill Level: Intermediate Installation instructions for Alpha Racing Quickshifter/Blipper for a pre-2014 S1000RR Tools Required: Alen keys/socket/drivers Torx keys/sockets/drivers Metric box wrenches and

More information

Clutch Operated Roller Shade with Fascia Installation Instructions

Clutch Operated Roller Shade with Fascia Installation Instructions Clutch Operated Roller Shade with Fascia Installation Instructions Tools Required for Installation: Power Drill & Drill Bits Installation Screws Level Pliers Measuring Tape Step #1 Bracket Installation

More information

TOL Designs. Tank Overlay and Dash. tech

TOL Designs. Tank Overlay and Dash. tech tech TOL Designs Story by Jason R. Hoard Photos by Jesse B. Nelson Hopefully, you have been following our customization of this 2009 Electra Glide. We started with a Misfit Slip Fit neck rake kit, Glenndyne

More information

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER. SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions

More information

$1.00 FOR THE TQIO/RCIO

$1.00 FOR THE TQIO/RCIO $1.00 FOR THE TQIO/RCIO m mm HDBBYSHOP Champion Jay Halsey has an impressive track record. One of Jay's advantages is a whisper smooth tranny thanks to his dad, Jim. Now you can build a Halsey transmission!

More information

HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT

HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 9/23/2009 1 of 6 ITEM 1 QTY 8 Parts List PART NUMBER DESCRIPTION 3/8" CONICAL TOOTHED WASHER TOOLS REQUIRED #2 PHILLIPS SCREWDRIVER #2 STUBBY SCREWDRIVER 8mm SOCKET 13mm SOCKET RATCHET 12" EXTENSION TORQUE

More information

New Coil-Spring Front End on Original Stock Chassis

New Coil-Spring Front End on Original Stock Chassis 1949-1954 Chevy Car Coil-Spring Front End Tech line: 1-855-693-1259 www.totalcostinvolved.com Read and understand these instructions before starting any work! USE THE PARTS LIST BELOW TO MAKE SURE YOUR

More information

Please confirm that all parts are present before beginning the factory exhaust system removal and db Performance Exhaust system installation.

Please confirm that all parts are present before beginning the factory exhaust system removal and db Performance Exhaust system installation. Please take time to read and understand these installation instructions. We recommend that the installation of this system be performed by a qualified service center or professional muffler installer who

More information

TOYOTA PRIUS LOW-DECK CARGO TRAY Preparation

TOYOTA PRIUS LOW-DECK CARGO TRAY Preparation Preparation Part Number: PT908-476 Kit Contents Cargo Tray Seat Back Cover driver side Seat Back Cover pass. side Hardware Bag Contents Additional Items Required For Installation Conflicts Vehicles with

More information

SAFETY. Your safety and the safety of others is very important.

SAFETY. Your safety and the safety of others is very important. SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions

More information

TONNEAU INSTALLATION GUIDE

TONNEAU INSTALLATION GUIDE TONNEAU INSTALLATION GUIDE Warranty, Care & Maintenance Model 1080 GMC Sierra Ext/Crew Cab 5.7' Short Bed 2007-Current EASY AS 1-2-3! NORMAL INSTALLATION TIME 30 MINUTES For Warranty Issues, Contact UnderCover

More information

Educational Robot. Revision 2.0

Educational Robot.  Revision 2.0 Educational Robot www.ridgesoft.com Revision 2.0 IntelliBrain-Bot Assembly Guide 1 Introduction This document provides instructions to guide you through assembly of your IntelliBrain -Bot. It takes approximately

More information

Assembly Manual. Assembly Instructions Read Carefully 2.1. Parts included: Tools suggested: Electric Drill

Assembly Manual. Assembly Instructions Read Carefully 2.1. Parts included: Tools suggested: Electric Drill 2.1 Assembly Manual Tools suggested: Parts included: Electric Drill 3/8ths bit 5/16ths bit Phillips screw driver Cutting pliers 1/2 inch socket wrench 1/2 inch wrench or crescent wrench 8 mm socket wrench

More information

Trigger Assembly Replacement Instructions Trigger Assembly Kit (ARMORTAK)

Trigger Assembly Replacement Instructions Trigger Assembly Kit (ARMORTAK) Trigger Assembly Replacement Instructions Trigger Assembly Kit (ARMORTAK) Trigger Assembly Kit Part # ARMORTAK Standard Repair Time: 45 Minutes Trigger Assembly Kit Video available at: fifthwheel.com/armor

More information

Rekluse Motor Sports, Inc. The z-start Clutch. Husaberg ( )

Rekluse Motor Sports, Inc. The z-start Clutch. Husaberg ( ) Rekluse Motor Sports, Inc. The z-start Clutch Husaberg (1989-2003) Installation Guide Copyright 2002-2004 Rekluse Motor Sports z-start Revision 3.000 RMS125 Husaberg 89-03 191-225 Manual Revision: 012805

More information

Installation Instructions

Installation Instructions GM 2500-3500 22K Industry Standard SuperRail Custom Mounting Kit #2328 Industry Standard Super 5 th #1900 Gross Trailer Weight (Maximum) 16,000 lbs. Vertical Load Weight (Max. Pin Weight) 4,000 lbs. #2100

More information

The Go Baby Go Build Manual

The Go Baby Go Build Manual The Go Baby Go Build Manual The step-by-step guide to creating your own Go Baby Go Car 4488 Shockwave Robotics and Pacific University Index 1. List of Mat erials 2. Mechanical Assembly a. Installing the

More information

Installation Manual Short Shift Kit 2000 and up Toyota Celica 2000 and up MR Spyder

Installation Manual Short Shift Kit 2000 and up Toyota Celica 2000 and up MR Spyder Page 1 Installation Manual Short Shift Kit 2000 and up Toyota Celica 2000 and up MR Spyder 1. Unscrew the shift knob and remove the boot. 2. Remove cover which houses the lighter assembly. There are four

More information

INSTALLATION GUIDE. Clutch Cable Actuated Models Manual Revision:

INSTALLATION GUIDE. Clutch Cable Actuated Models Manual Revision: REKLUSE MOTOR SPORTS The z-start Pro Clutch INSTALLATION GUIDE Clutch Cable Actuated Models 191-800 Manual Revision: 061810 2002 Rekluse Motor Sports Rekluse Motor Sports, Inc. 110 E. 43rd Street Boise,

More information

Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.

Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered. Serving the Truck & Trailer Industry Since 1944 Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com Indianapolis, IN

More information

C I R R U S COWLING DESCRIPTION

C I R R U S COWLING DESCRIPTION COWLING 1. DESCRIPTION Serials 22-0002 thru 22-019, 22-0821 thru 22-711: The engine cowling, fabricated from fiberglass and epoxy, consists of one upper and two lower halves. A one-piece (22-0002 thru

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS For 63600 and 64040 Front Bumper and Winch Mount For Ford Super Duty Trucks As you read these instructions, you may see NOTES, CAUTIONS and WARNINGS. Each message has a specific

More information

9F1760/9F1761 COBB Sport Springs Ford Focus ST

9F1760/9F1761 COBB Sport Springs Ford Focus ST 9F1760/9F1761 COBB Sport Springs 2013+ Ford Focus ST Installation Instructions Congratulations on your purchase of the COBB Sport Springs for your 2013+ Ford Focus ST. These instructions should only be

More information

Cassette Systems Fabrication & Installation Instructions Cassette 80, 100, 120

Cassette Systems Fabrication & Installation Instructions Cassette 80, 100, 120 Cassette Systems Fabrication & Installation Instructions Cassette 80, 100, 120 All Cassette Components 2 Cassette Systems Tools Needed page 4 Cassette 80 page 5-12 System Diagram- page 5 System Diagram-

More information

SERVICING MANUAL FOR SPINALIS CHAIRS Outline of Servicing Procedures

SERVICING MANUAL FOR SPINALIS CHAIRS Outline of Servicing Procedures SERVICING MANUAL FOR SPINALIS CHAIRS Outline of Servicing Procedures Individual steps of servicing procedures for repairs of SpinaliS chairs are outlined below. All steps can be performed by a single person

More information