COMPANY OVERVIEW ESTABLISHED IN 1988 PAGE 02

Transcription

1

2 COMPANY OVERVIEW MANGANESE STORAGE IN BRISBANE CME was established in 1988 and has since grown to become one of the largest suppliers of crushing equipment and consumables to the mining and quarrying industries in Australia, South East Asia, Africa and the Middle East. Now part of the H-E Parts International group of companies, CME has offices in Perth, Sydney, Brisbane and Melbourne and employs around 90 people, including experienced trades persons, applications engineers and crushing and screening specialists. CRUSHER LEAVING CME PERTH A FULLY INTEGRATED SUPPLY AND SERVICE COMPANY ESTABLISHED IN 1988 COMPANY O YOONSTEEL FOUNDRY PAGE 02 CME s core business is the supply of world class manganese crusher liners and crusher parts. A fully integrated supply and service company, CME also sells new and refurbished crushers and screens, carbide overlay and Q&T steels and a range of fabricated and OEM materials handling equipment.

3 YOONSTEEL MANGANESE CRUSHER LINERS CME is the sole Australian distributor for Yoonsteel Malaysia Sdn Bhd, considered by many in the mining industry to be the world s leading manufacturer of manganese crusher liners. Yoonsteel employs around 700 people and has an annual output of around 30,000 tonnes, more than the total consumption of crusher liners in Australia. Yoonsteel 21% manganese crusher liners have been proven to consistently outperform other brands by up to 35% in most crushing applications and up to 60% in high wear applications. The improved wear life of Yoonsteel manganese liners results in lower crushing costs and higher productivity through less frequent and more predictable manganese change-outs. To further improve liner performance, CME has designed wear simulation software to optimise liner profile design to achieve desired product specification, increased throughput, reduced power draw or a combination of these parameters. Yoonsteel 21% manganese liners offer: Longer wear life (liners retain initial profile longer, resulting in more reliable product sizing and less recirculation) Fast work-hardening properties Reliable change-out scheduling Reduced downtime through less change-outs Increased production MANTLE Lower overall liner costs over time VERVIEW JAW LINERS BOWL LINERS CRUSHER BACKING CME offers a range of crusher backing compounds to accommodate both temperature extremes and rapid and extended setting times.

4 CRUSHER SPARE PARTS With offices located in Perth, Sydney, Brisbane and Melbourne and a multi million dollar inventory of spare parts, CME can guarantee prompt delivery of spare parts to local and overseas markets. CME is the OEM supplier for Cedarapids ElJay MVP and Rollercone spares and carries an extensive range of parts to suit the largest gyratory, jaw and cone crushers as well as VSI and HSI crushers and screens. Australia s largest range of aftermarket crusher spares PERTH STORES PAGE 04

5 CEDARAPIDS MVP CONE CRUSHER MVP550 CONE CRUSHER COMMISSIONED IN THE PILBARA MACS Mobile Aggregate Crushing System TEREX CEDARAPIDS CME is the sole distributor in the Western region of Australia for the Terex Cedarapids range of cone crushers and screens. The Terex Cedarapids product range includes: ElJay Rollercone MVP: MVP280, MVP380, MVP450, MVP550 ElJay Rollercone Classic: RC45, RC54, RC66 ElJay Rollercone II: RC45, RC54 ElJay Flat Screens: TSH 16x5, TSH 16x6, TSH 20x6, TSH 20x7, TSH 20x8 MACS Mobile Aggregate Crushing System 2 or 3 stage crushing plant producing up to 600 tph CEDARAPIDS SCREEN

6 AUSPACTOR VERTICAL SHAFT IMPACT CRUSHER The Auspactor VSI, designed and manufactured in Australia by CME, is the benchmark in VSI performance and cost effectiveness. CME s Auspactor VSI is used in quarries and metalliferous mining operations where it is essential to meet strict product specifications for: Particle shape Manufactured sand Fines for mineral extraction With the unique design and flexibility of the Auspactor rotor, many VSI owners have retrofitted the Auspactor rotor to reduce maintenance costs and improve shape and productivity. CME s Auspactor VSI crusher offers: Higher productivity with lower wear cost Compact design Low maintenance Low operating costs High capacity Readily available spare parts Experienced team of dedicated VSI technicians LILO rotors Suitable for trailer or track mounting High tolerance to hard, abrasive, fine, wet or sticky feed materials Easy access for inspection of machine internals Suits high or standard profile rotors Machine isolated from frame and motor by rubber mounts Reliable, proven bearing cartridge design Generous discharge openings AUSPACTOR ROTOR Auspactor VS300RR AUSPACTOR VS300RR INSTALLED IN UAE TRACKED AUSPACTOR VS100RR CRUSHING SILICA QUARTZ PAGE 06 AUSPACTOR VS200RR MODEL DRIVE MAX kw MAX FEED SIZE [SINGLE PASS] TYPICAL MASS TPH VS75 SINGLE VS100 SINGLE VS200 SINGLE VS200 DUAL 2X VS300 SINGLE VS300 DUAL 2X

7 CME JAW CRUSHER Designed and manufactured by CME Perth, CME s jaw crusher design incorporates the following innovative features: Heavy-duty construction for long life and reliability High stroke for maximum capacity Open pitman construction for ease of inspection Hydraulically operated gap adjustment Optional fully automatic, self-tensioning pullback rod assembly Application-specific jaw liner design Footprint can be adapted to allow easy replacement of your existing machine Suitable for automatic bearing lubrication (optional) CME JAW CRUSHER CME 42x HD JAW CRUSHER INSTALLED ON A MOBILE TRAILER CME JAW CRUSHER SCHEMATIC Designed and manufactured in Australia

8 SERVICE As part of its national service network CME offers complete in house and site repair and maintenance services from fully equipped workshops in Perth and Brisbane. CME PERTH WORKSHOP Grizzly fingers & pa Apron feeder 55 TONNE OVERHEAD CRANE LIFTING AN MP1000 CRUSHER BASE PAGE 08 ON-SITE SERVICE Servicing the mining, quarrying and recycling industries

9 GRIZZLY FINGERS & PANELS CME has developed a range of self-clearing grizzly assemblies, which prevent fine material from being retained between the grizzly fingers, minimising the amount of fine material being sent to crushers. This not only improves the life of the crusher liners, but allows higher tonnage rates to be achieved - especially with sticky material that has a tendency to block most grizzly assemblies. APRON FEEDER PANS & PARTS CME supplies apron feeder pans in Yoonsteel manganese steel for a wide range of applications, and can customise these parts to suit individual requirements. Both the design and metallurgy can be customised to improve pan life and resolve common problems such as product leakage. GRIZZLY FINGERS APRON FEEDER PANS nels, pans & parts IRON ORE BIN LINED WITH WEAR PLATE WEAR PLATE CME offers an extensive range of chromium carbide clad plate and quenched and tempered wear plate to suit all wear plate applications, along with a 10 x 5 metre CNC plasma cutter and 600 tonne brake press for the fabrication of chutes, crusher mainframe liners and ore bins. CRUSHER DISCHARGE CHUTE LINED WITH WEAR PLATE WEAR BARS & BUTTONS CME supplies a range of wear bars, buttons and chocky bars, a combination of high chromium white iron metallurgically bonded to a mild steel backing plate, providing maximum impact and abrasion resistant protection for your equipment. WEAR PRODUCTS

10 ROSTA DAMPING & OSCILLATING TECHNOLOGY CME is the Australian distributor for the Swiss manufactured ROSTA product range. Utilising a unique rubber inlay element, ROSTA is the engineering ingenuity behind CME s vibrating screen suspension system, motorbases for constant belt tensioning and impact tables, the ultimate conveyor belt protector. 1.7 X 1.5 METRE IMPACT TABLES INSTALLED IN THE PILBARA IMPACT TABLE ROSTA MOTORBASE PART OF THE H-E ROSTA MB 100X750 MOTORBASE ON A PUMP IN NEWMAN PAGE 10 SCREEN RETROFITTED WITH ROSTA AB OSCILLATING MOUNTS ROSTA MOTORBASE

11 emanufactured components and equipment to the global mining, uarry H-E and PARTS heavy INTERNATIONAL construction industries. We provide our customers ith a superior alternative to many of the traditional OEM channels by In 2008 CME became a part of the H-E Parts International ombining quality, competitive pricing and responsiveness. group of companies; a leading independent supplier of parts, remanufactured components and equipment to the global mining, quarry and heavy construction industries. H-E Parts International Birrana provides is a its specialist customers in the with design a superior and manufacture of wheel groups for mobile mining alternative to many equipment. of the traditional From its four OEM service channels centers by in Australia, the company has remanufactured over 14,000 assemblies, aiding its customers in obtaining millions of additional maintenance combining quality, competitive pricing and responsiveness. free service hours. Established in 1974, Birrana has expertise in brake, final drive, differentials, axle and suspension systems. Crown Parts and Machinery Established in 1974, Crown manufactures and distributes parts and components for off-highway mining trucks and shovels. With operations in North and South America, and sales offices in Africa and Asia, Crown provides a direct source of high quality parts and remanufactured components to the mining and heavy construction industry. The company offers complete in-house solutions to its customers, providing onsite evaluations and design services globally. Crushing and Mining Equipment Serving customers since 1988, CME has grown to become one of the world s largest suppliers of crushing equipment, replacement parts and consumables to the mining and quarrying industries. Operating from Australia, Indonesia and The United Arab Emirates, the company supplies the highest quality parts and components as well as world-class manganese liners to leaders in the mining and construction materials industries. The company also designs and manufactures customized crusher plants to suit unique customer demands. Dom-Ex Located in the United States has been in business for over 25 years serving the mining and construction industries worldwide with quality new, rebuilt and used replacement parts and components for heavy equipment such as haul trucks, shovels, drills, loaders and dozers. Dom-Ex s equipment division sells reconditioned machines for such manufacturers as Caterpillar, Komatsu, Dresser, Euclid, Hitachi, Bucyrus, P & H, Unit Rig, Terex and Volvo to mines, quarries and contractors around the world. H-E Parts Distribution a global supplier of quality replacement parts for heavy construction machinery, including Caterpillar, Komatsu and John Deere equipment. H-E Parts Distribution combines the strengths of over 100 years of company history and expertise and the resources of three highly respected aftermarket parts companies; GraceTrack Services, GETCO and TractoAmerica. From its 5 North American warehouse PARTS INTERNATIONAL world wide basis. GROUP OF COMPANIES locations, the company offers the highest quality, availability and competitive pricing on a Warehouse / Repair and Sales Offices Manufacturing Center

12 Perth Office Brisbane Office Cnr Lee Rd & Macedonia St, Naval Base 9 Lions Park Dr, Yatala QLD 4207 Australia WA 6165 Australia PO Box 662, Beenleigh QLD 4207 Australia T: T: F: F: perth@crushingandmining.com.au brisbane@crushingandmining.com.au Sydney Office Melbourne Office Unit 2 / 64 Edward St, Riverstone C:/ Unit 2 / 64 Edward St, Riverstone NSW 2765 Australia NSW 2765 Australia T: T: F: F: sydney@crushingandmining.com.au melbourne@crushingandmining.com.au