DRUM HANDLING EQUIPMENT

Size: px

Start display at page:

Download "DRUM HANDLING EQUIPMENT"

Willis Stevenson
6 years ago
Views:

Heavy-duty Drum Trucks for 200/220L Drums Strong steel construction, Zinc Plated protection.

100mm nylon jockey wheels allow maximum stability when drums are loaded or unloaded.

options pneumatic or solid rubber Attachment for plastic drums an optional extra for each model DTZ80 Rough Terrain Negotiate

Wheels: 250mm pneumatic. 100mm nylon jockey. DTWHBB Industrial & Yard For smooth surfaces.

53 DTFBSR Industrial Steel-centred 250mm pneumatic 350kg DTWHBB Industrial & Yard Steel-centred 250mm solid rubber 350kg

or low volume 60 or 200L steel drums. Strong steel construction with a zinc-plated finish for full protection.

Wheel options: 300 x 4 pneumatic or 250mm solid rubber. DR64 TRIANGULAR CASTORS: 75mm nyl.

1 Heavy-duty Drum Trucks for 200/220L Drums Strong steel construction, Zinc Plated protection. Heavy sliding catch engages over drum lip. Wheel choices (as pictured). 100mm nylon jockey wheels allow maximum stability when drums are loaded or unloaded. Up to 350kg capacity Welded steel construction with zinc-plated finish for maximum corrosion resistance A range of wheel options pneumatic or solid rubber Attachment for plastic drums an optional extra for each model DTZ80 Rough Terrain Negotiate gravel surfaces, floor grates etc. Wheels: 426mm pneumatic. 100mm nylon jockey. DTFBSR Industrial Use on multi surfaces. Wheels: 250mm pneumatic. 100mm nylon jockey. DTWHBB Industrial & Yard For smooth surfaces. Wheels: 250mm Solid Rubber-tyred DTBWBB Drum Cradle Chain secures the drum. Fixed stand to lay horizontally. Wheels: 400mm pneumatic. MODEL SUITABLE FOR WHEELS CAPACITY DTZ80 Rough Terrain Steel-centred 426mm pneumatic 350kg SPECIAL PURPOSE HAND- TRUCKS Pg DTFBSR Industrial Steel-centred 250mm pneumatic 350kg DTWHBB Industrial & Yard Steel-centred 250mm solid rubber 350kg DTBWBB Drum Cradle 400mm plastic-centred pneumatic 350kg Combination Drum Truck Drum Dollies Designed for handling low weight or low volume 60 or 200L steel drums. Strong steel construction with a zinc-plated finish for full protection. Sliding catch secures drum. Can also be used as a General Purpose Hand Truck. Wheel options: 300 x 4 pneumatic or 250mm solid rubber. DR64 TRIANGULAR CASTORS: 75mm nyl. swivel CAPACITY: 300kg SIZE: 500m DR64 Triangular Heavy steel flat bar construction. For 200L steel drums. Castors: 75mm nylon swivel. Capacity: 300kg DTC HEIGHT: CAPACITY: LIP SIZE: DRUM TRUCK 1200mm 250kg 250mm x 360mm DDSQ SQUARE CASTORS: 75mm nyl. swivel CAPACITY: 400kg SIZE: 600mm x 600mm DDSQ Square Provides full mobility of drums throughout the factory. Heavy steel angle construction. For 200L steel drums. DTC/T Plastic Drum Tie-down A strong webbing and ratchet tie-down is available as an optional extra for securing plastic drums to the Drum-truck. DTC DR66 SQUARE CASTORS: 75mm nyl. swivel CAPACITY: 400kg SIZE 600mm x 600mm HEIGHT: 125mm DR66 Square General purpose. Welded angle steel with 18mm customwood deck. 54 SPECIALS CAN BE MADE TO SUIT CUSTOMERS UNIQUE REQUIREMENTS

Up to 250kg capacity Welded steel construction with zinc-plated finish for maximum

designed and built to provide safe and efficient handling of heavy and awkward drums of all

Drum Cradles DC1 Drum Cradle Ideal for 200L steel drums.

Rock back onto wheels to tilt drum horizontially to transport or decant.

WHEELS: 100mm black polypropylene DC4 Drum Cradle For 200L steel drums or 220L plastic

Position flat-bar lip under lower lip of drum and pull back to tilt horizontally to

Fit attachment DC4R (right) to freely rotate (steel) drums when resting horizontially.

WHEELS: 100mm black polypropylene DC4R SIZE: DRUM REVOLVING ATTACHMENT 590mmL x 480mmW

1120mm DTU DWS General Drum Handling DL70 Drum Lifter (right) Attach to 200 litre drums and

DL70 DTU Drum Tilting Unit (far left) Two models standard DTU for use with an overhead

Optional locking device available. Ratchet secures drum.

2 Up to 250kg capacity Welded steel construction with zinc-plated finish for maximum corrosion resistance Drum Tipping Cradles Designed for 200L steel drums with plastic drum options. DRUM HANDLING EQUIPMENT Drum Tipping Cradles Our specialised Drum Handling Equipment is designed and built to provide safe and efficient handling of heavy and awkward drums of all types. They re constructed from high quality steel and are very strong and robust. Drum Cradles DC1 Drum Cradle Ideal for 200L steel drums. Telescopic handles with sliding catches which engage the drum lip. Rock back onto wheels to tilt drum horizontially to transport or decant. DC1 DRUM CRADLE SIZE: 930mm Long (handles in) Add 560mm with handles out 500mmW x 510mmH WHEELS: 100mm black polypropylene DC4 Drum Cradle For 200L steel drums or 220L plastic drums. Position flat-bar lip under lower lip of drum and pull back to tilt horizontally to transport or decant. Fit attachment DC4R (right) to freely rotate (steel) drums when resting horizontially. DC4R Drum Revolving Attachment DC4 SIZE: DRUM CRADLE 900mmL (including lip) 550mmW x 480mmH WHEELS: 100mm black polypropylene DC4R SIZE: DRUM REVOLVING ATTACHMENT 590mmL x 480mmW WHEELS: 75mm black nylon DU Drum Upender Zinc-plated protection Capacity: 250kg Length: 1120mm DTU DWS General Drum Handling DL70 Drum Lifter (right) Attach to 200 litre drums and use lifting hook/overhead hoist. DL70 DTU Drum Tilting Unit (far left) Two models standard DTU for use with an overhead hoist, and a model with forklift pockets. Drums rotate freely on axis. Optional locking device available. Ratchet secures drum. DWS Drum Webbing Sling (left) For 60L & 200L steel drums and a number of plastic drums. Ratchet secures drum. DLS Drum Lifting Sling Lift drums vertically, horizontally, or angled to discharge contents. Use with a forklift truck or overhead hoist. DT Drum Tongs Lift drums horizontally using overhead hoist. Semi-automatic. Use with a forklift truck or overhead hoist. DLC Drum Lifting Clamp Elephant Lift drums vertically, horizontally or invert and dump contents. Self locking jaws. Use with overhead hoist. Capacity: 1000kg FOR DRUM PUMPS & TAPS SEE PAGE

Forklift Attachments Drum Grips & Clamps EASY SLIP-ON TYPE Up to

200L steel drums FDTU Forklift Drum Tilter Easily slide on to forks.

on to forks. Suitable for standard steel 200L drums.

FLB150 Forklift Drum Carrier Manipulate Drum from the Forklift.

DG360B Double AUTO PARROT BEAK GRIP Suitable for standard steel 200L

ATTACHMENTS Drum Lifting Trucks HDT25B Hydraulic Drum Truck STRADDLE

3 Forklift Attachments Drum Grips & Clamps EASY SLIP-ON TYPE Up to 680kg capacity Heavy, welded steel construction Designed to handle 200L steel drums FDTU Forklift Drum Tilter Easily slide on to forks. Drums rotate freely on axis with optional locking device available. Ratchet and chain secures drum. Maximum fork section: 135 x 50mm ADC1 Auto Drum Clamp Easily slide on to forks. Suitable for standard steel 200L drums. Also available: ADC2 Double Drum Maximum fork section: 180 x 50mm FLB150 Forklift Drum Carrier Manipulate Drum from the Forklift. Suitable for standard steel 200L drums, also Mauser L ring, and some plastic drums. Ratchet and chain secures drum. Capacity: 680kg Maximum fork section: 170 x 50mm DG360A Single DG360B Double AUTO PARROT BEAK GRIP Suitable for standard steel 200L and 60L drums also Mauser L-ring drums, CHH plastic drums and Fibreboard drums. Max. fork section: 135 x 50mm ASK US ABOUT OTHER MODELS OF FORKLIFT ATTACHMENTS Drum Lifting Trucks HDT25B Hydraulic Drum Truck STRADDLE LEG The claw grabs the drum lip hydraulic pump raises drum to desired height. Move easily on large roller wheels and easy steering rear braked castor. Capacity: 250kg. Lifting height: 345mm MK80 Mobile Drum Carrier Tighten the chain lever to secure drum to the collar. Lift and tilt to decant a full drum. 2 large roller wheels with easy steering rear castor 56

Up to 2500kg capacity Maximum capacity 2500kg at extension position 1.

Secured to the forklift by safety chains, the overall length when retracted is 1.3m, and when extended is 2m.

POCKETS: 185mm x 65mm SWL: 2500kg 1200kg 900kg 750kg UNIT WEIGHT: 100kg FJCS25 Wheelie Bin Tipper With two models available, one for 240L and

The bin is secured in the bin cradle with safety chains.

1000mm 100kg WB-660 500kg 165 x 65mm 1700kg 140kg Drum Heating Collar DHB/T Drum Heater (200/220L steel drums only) For heating, melting and

Heater is non-flameproof for operation on 230 volt AC mains. Maximum 2000W with thermostat control (supplied without input lead).

Drum Mixing Equipment Mixing blades are specially designed for bung-hole entry mixing in 60 & 200L drums.

4 Up to 2500kg capacity Maximum capacity 2500kg at extension position 1. Welded steel construction, fully zinc-plated for maximum corrosion resistance DRUM HANDLING EQUIPMENT Forklift Attachments Fixed Jib and Bin Tipper Fixed Jib Attachment Short. 2.5 tonne The Fixed Jib provides an additional lifting height with the extension beam being raised above the fork pockets. Secured to the forklift by safety chains, the overall length when retracted is 1.3m, and when extended is 2m. SAFE WORKING LOAD (SWL) PER POSITION: FJCS25 FIXED JIB ATTACHMENT POSITON: CAPACITY: 2500kg Maximum EXTENSION: FORK POCKETS: 185mm x 65mm SWL: 2500kg 1200kg 900kg 750kg UNIT WEIGHT: 100kg FJCS25 Wheelie Bin Tipper With two models available, one for 240L and another for 660L wheelie bins, the WB style tipper is operated from the forklift drivers seat by a pull-cord. The bin is secured in the bin cradle with safety chains. Enamel paint finish WB kg capacity WB L & 660L MODELS FORK LOAD UNIT MODEL CAPACITY POCKETS CENTRES WEIGHT WB kg 165 x 65mm 1000mm 100kg WB kg 165 x 65mm 1700kg 140kg Drum Heating Collar DHB/T Drum Heater (200/220L steel drums only) For heating, melting and thawing non-volatile liquids, solids and viscous materials such as greases, fats, gelatine, tar and heavy oil. Heater is non-flameproof for operation on 230 volt AC mains. Maximum 2000W with thermostat control (supplied without input lead). Standard temperature range 30º 110º, special 0º 40º. Drum Mixing Equipment Mixing blades are specially designed for bung-hole entry mixing in 60 & 200L drums. The stainless steel blades are lightweight and portable for speed and efficiency and set-up is simple. The mixers can be driven with a 1/2 electric drill or explosion-proof air drive motor (as pictured). Thick or cold fluids can be thinned by heating (see Drum Heater) for quicker mixing and dispensing. USUAL REQUIREMENTS BUNG ENTRY (2 BSP) 200L DRUM: M02 Mixer M16 Coupler M07 Motor Stand M14 Air Drive Motor ( rpm) 60L DRUM : M19 Mixer M24 Coupler M07 Motor Stand M14 Air Drive Motor ( rpm) ELECTRIC DRILL OPERATION Variable speed drill 1/2 chuck or larger. 200L DRUM: M02 Mixer 60L DRUM: M19 Mixer M14 Air Drive Motor M07 Motor Stand Galvanised M02 Mixing Blade 5-blade, Stainless Steel M16 Coupler S/S 57

Drum Pumps Rotary Pump Suitable for 2 outlets Drum Pump options designed for use with two inch outlets on 200L

Delivers up to18 litres per minute. Transfer fluids in both directions.

Includes 2.2m farm tank grade anti-static hose.

Always wear protective clothing and eye protection when dispensing chemicals. Don t mix applications; ie.

Lever Pump TQ01 General purpose, steel construction with three alternative O rings and chemical compatibility

Suitable for a wide variety of chemicals and solvents. Convenient bung opener cast on pump head. Pumps approx.

Siphons liquids from higher to lower levels. Pumping the bellows primes the pump and begins siphon action.

Siphons up to 20 litres per minute, handles light oils, kerosene and various types of light solvents.

5 Drum Pumps Rotary Pump Suitable for 2 outlets Drum Pump options designed for use with two inch outlets on 200L and 60L standard steel drums. TQ14 Cast alloy body with steel inlet/outlet tubing and heavy-duty handle. Delivers up to18 litres per minute. Transfer fluids in both directions. Ideal for transferring petrol, diesel fuels, heavy oil, machine oil, low viscosity oils and non-corrosive liquids. Includes 2.2m farm tank grade anti-static hose. IMPORTANT: Advise specific chemical applications to ensure correct usage. Always wear protective clothing and eye protection when dispensing chemicals. Don t mix applications; ie. one pump per fluid type. Lever Pump TQ01 General purpose, steel construction with three alternative O rings and chemical compatibility chart. Telescopic suction tube. Comes with 1.8m outlet hose (petrol resistant). Suitable for a wide variety of chemicals and solvents. Convenient bung opener cast on pump head. Pumps approx. 250ml per stroke, and handles liquids to SAE90. Siphon Pump TQ05 Polyethylene construction. Siphons liquids from higher to lower levels. Pumping the bellows primes the pump and begins siphon action. Simply loosen vent cap to stop the siphon flow. Pump bellows to dispense fluids to a higher level. Siphons up to 20 litres per minute, handles light oils, kerosene and various types of light solvents. Bung Spanner DBS3 430mm For removing bungs from steel or plastic drums. Fits most types of drum closure. Hand Pumps SUITABLE FOR BOATS, CARAVANS, MOTOR HOMES ETC. Diaphragm Hand Pump Self-priming Sigma Double-action Pump Cast-iron K model Classic Brass Pump 10 strokes per litre Ultra Pantry Pump Quality plastic pump Vertical plunger action Suitable for clear and light fluids water, petrol, diesel. Rocker Galley Pump Fresh or salt water 13 strokes per litre 58

2 and 3/4 Polyethylene, Polypropylene, Brass and Stainless Steel

Drum Taps KEY: BSP British Standard Pipe Thread NPS US National

Low Density Polyethylene TP02 Treacle Tap Molasses Gate.

loaded, Teflon seal, 2 BSP TP01 Polyethylene Flo-king.

action. 3/4 BSP TP07 Polypylene HDPE SPRING LOADED. Lever action.

3/4 BSP TP08 Polyethylene LLDPE Lever action.

Fire baffle 3/4 BSP TP04 Ball valve Nickel plated, brass body,

Male/Female, 3/4 BSP Special Purpose Taps TP15/58 Polyethylene

Aeroflow with 58mm cap for Plastic Industry and Rheem containers.

TP22 with optional nipple and elbow TP22 Stainless Ball Valve

Serviceable in-situ TP21 2 Piece. Teflon seal F-F 2 BSP.

(HDPE) TPA06 TPA02 TPA03 TPA01 TPB01 TPB02 TPB03 TPB04 TPA01 2

6 2 and 3/4 Polyethylene, Polypropylene, Brass and Stainless Steel Lever and screw-action models DRUM HANDLING EQUIPMENT Drum Taps 2 Drum Taps KEY: BSP British Standard Pipe Thread NPS US National Pipe (straight) Thread HDPE High Density Polyethylene LLDPE Linear Low Density Polyethylene TP02 Treacle Tap Molasses Gate. Gunmetal, 2 BSP TP02S Treacle Tap Molasses Gate Brass, spring loaded, Teflon seal, 2 BSP TP01 Polyethylene Flo-king. lever action 2 NPS 3/4 Drum Taps TP09 Polyethylene HDPE Screw action. 3/4 BSP TP07 Polypylene HDPE SPRING LOADED. Lever action. 3/4 BSP TP14 Polyethylene HDPE Front lever action. 3/4 BSP TP08 Polyethylene LLDPE Lever action. 3/4 BSP TP18 Brass SPRING LOADED. Self-closing, Teflon seal. Fire baffle 3/4 BSP TP04 Ball valve Nickel plated, brass body, chrome plated ball, Teflon seals. Male/Female, 3/4 BSP Special Purpose Taps TP15/58 Polyethylene LLDPE. Aeroflow with 58mm cap for Plastic Industry and Rheem containers. TP15/70 LLDPE. Aeroflow with 70mm cap for Carter Holt Harvey containers. TP22 with optional nipple and elbow TP22 Stainless Ball Valve (316) 3 Piece. Teflon seal F-F 2 BSP. Serviceable in-situ TP21 2 Piece. Teflon seal F-F 2 BSP. Seal serviceable TP20 1 Piece. Teflon seal F-F 2 BSP. (1 through body). Non-serviceable Drum Adaptors Polyethylene (HDPE) Bung Reducers (HDPE) TPA06 TPA02 TPA03 TPA01 TPB01 TPB02 TPB03 TPB04 TPA01 2 Mauser external / 2 BSP internal short TPA02 2 Rieke external / 2 BSP internal TPA03 2 Van Leer external / 2 BSP internal TPA06 IBC Shultz 60mm NW50 Butt Fem - 2 BSP TPB01 2 BSP external / 3/4 BSP internal TPB02 2 Mauser external / 3/4 BSP internal TPB03 2 Van Leer external / 3/4 BSP internal TPB04 2 Rieke external / 3/4 BSP internal 59

Drum Spill Containment Bins Offering complete protection against damaging and costly chemical spills,

Close spacing support bars allow for large or small drums up to 2000kg to be placed on the spill bin.

Australian Standards, being classified as portable units, and have zinc-plated finish.

No. OF DIMENSIONS SPILL UNIT MODEL DRUMS W x D x H CAPACITY WEIGHT SL 1 1 810 x 760 x 490mm 240 litres

1400 x 270mm 245 litres 40kg SBP 4 Plastic Spill Pallet Holds up to four 200L drums.

Drum Racking System These drum racking options provide a cleaner environment and a safer working area by

The racking system consists of the bolt together drum rack, and the spill containment tray which it stands

Each spill tray is fitted with a removable plug for emptying.

7 Drum Spill Containment Bins Offering complete protection against damaging and costly chemical spills, Spill Containment Bins are available for one, two and four 200 litre drums. Close spacing support bars allow for large or small drums up to 2000kg to be placed on the spill bin. All models have a spill capacity of at least 110% containment of the largtest drum in accordance with Australian Standards, being classified as portable units, and have zinc-plated finish. For 200L drums One, two and four drum units available Spillage capacity is 110% containment SL 4 SL 1 SL 2 No. OF DIMENSIONS SPILL UNIT MODEL DRUMS W x D x H CAPACITY WEIGHT SL x 760 x 490mm 240 litres 55kg SL x 610 x 440mm 250 litres 60kg SL x 1210 x 265mm 245 litres 70kg SBP x 1400 x 270mm 245 litres 40kg SBP 4 Plastic Spill Pallet Holds up to four 200L drums. Drip and spill containment unit integrated with IBC bund. Worksafe compliant. Drum Racking System These drum racking options provide a cleaner environment and a safer working area by protecting against costly and dangerous spills. The racking system consists of the bolt together drum rack, and the spill containment tray which it stands over. In the event of a spill, the tray can be easily removed without disturbing the drum rack. Each spill tray is fitted with a removable plug for emptying. Drum racking systems are fully zinc-plated RS2-2L RS2L A NUMBER OF DRUM RACKING OPTIONS ARE AVAILABLE RS2L DRUM RACKING SYSTEM WIDTH DEPTH HEIGHT RACK: 1330mm 600mm 831mm TRAY: 1210mm 1210mm 265mm Stand alone Drum Rack bolts together. Tray sits below and is forkliftable without disturbing the rack. RS3L RS3-3L 60 FOR DRUM TAPS SEE PAGE 58 59

Narrow Aisle Drum Truck. Drum Handling. Three-in-one Drum Carrier. Drum Transporter and Pouring Stand. Drum Handling. Capacity 300kg UDL

Narrow Aisle Drum Truck. Drum Handling. Three-in-one Drum Carrier. Drum Transporter and Pouring Stand. Drum Handling. Capacity 300kg UDL 41 Narrow Aisle Drum Truck Capacity 300kg UDL For transport and dispensing from 210ltr steel or plastic drums. Overall width of truck is less than a standard 210 ltr drum Use as truck for transporting