WEDNESDAY, MAY 30, 2018 *** 10:30 A.M. EDT *** WELCOME TO THE AUCTION SALE OF TERMS & CONDITIONS

Transcription

1 WEDNESDAY, MAY 30, 2018 *** 10:30 A.M. EDT *** WELCOME TO THE AUCTION SALE OF FORMER ASSETS OF TEK-MOTIVE, INC. 110 COMMERCE STREET, EAST HAVEN, CONNECTICUT, UNITED STATES, TERMS & CONDITIONS THIS SALE WILL BE CONDUCTED IN US FUNDS FINAL PAYMENT IN FULL IMMEDIATELY AFTER THE AUCTION A BUYER S PREMIUM OF 16.0% FOR ALL ONSITE BIDDERS AND 18.0% FOR ALL WEBCAST (REMOTE) BIDDERS WILL APPLY AT THIS SALE NO PAYMENTS WILL BE ACCEPTED BY OUR SITE SUPERVISOR REMOVAL DETAILS: SMALL ITEMS NO LATER THAN 5:00 PM ON THURSDAY, MAY 31, 2018 REMAINING ITEMS NO LATER THAN 5:00 PM ON WEDNESDAY, JUNE 13, 2018 CI DESIGNATES THAT A PROPER CERTIFICATE OF INSURANCE, ADDING CORPORATE ASSETS INC. AS AN ADDITIONAL INSURED AND A WORKERS COMPENSATION CLEARANCE CERTIFICATE, IS REQUIRED BEFORE ANY ITEM MARKED CI CAN BE MECHANICALLY REMOVED. FURTHERMORE, PROPERLY AUTHORIZED RIGGER RELEASE INSTRUCTIONS, IN WRITING, ARE REQUIRED BEFORE A RIGGER CAN COMMENCE REMOVAL OF THESE ITEMS NO ITEMS MAY BE REMOVED WHILE AUCTION IS IN PROGRESS NO EXCEPTIONS! THANK YOU 373 Munster Avenue, Toronto, ON, Canada M8Z 3C8 Tel Fax: NOW ACCEPTING: Visit for specific terms and conditions.

2 1 1 DEWALT 8" DOUBLE END BENCH 2 1 DEWALT 8" DOUBLE END BENCH 3 1 DEWALT 8" DOUBLE END BENCH 4 1 DEWALT 8" DOUBLE END BENCH 5 1 DEWALT 8" DOUBLE END BENCH 6 1 DEWALT 8" DOUBLE END BENCH 7 1 8" DOUBLE END BENCH 8 1 DEWALT 8" DOUBLE END BENCH 9 1 DEWALT 8" DOUBLE END BENCH " DOUBLE END BENCH 11 1 MFG N/A AIR RIVETER 12 1 CINCINNATI 18 ROYAL FLOOR TYPE DRILL PRESS WITH 8" THROAT (CI) 13 1 ENCO BENCH TYPE DRILL PRESS WITH 3800 RPM, 8" THROAT (CI) 14 1 CRAFTSMAN 3 SPEED VERTICAL BAND SAW WITH 18" THROAT, 24"X19" TABLE, 2 HP, S/N: 15 1 GROB VERTICAL BAND SAW WITH 18" THROAT, 24"X24" TABLE, BLADE WELDER/CUTTER, S/N: 16 1 JOHNSON JH10A HORIZONTAL BAND SAW WITH 14"X10" CAPAC- ITY, S/N: (CI) 18 1 MFG N/A BRAKE LATHE 19 1 ARBOR PRESS 20 1 BRIDGEPORT VERTICAL MILLING MACHINE WITH 32"X9" TABLE, SPEEDS TO 4250 RPM, 0.5 HP, S/N: (CI) " MACHINE VISE 22 1 BRIDGEPORT SERIES I VERTICAL MILLING MACHINE WITH ANALIM 2 AXIS DRO, 42"X9" TABLE, SPEEDS TO 4200 RPM, 2 HP, SERVO TYPE 140 POWER FEED, S/N: (CI) " MACHINE VISE 24 1 NARDINI-MSC 1640E TOOL ROOM LATHE WITH 16" SWING, 38" BETWEEN CENTERS, 1" SPINDLE BORE, 10" 3 JAW CHUCK, SPEEDS TO 2000 RPM, INCH/ METRIC THREADING, S/N: 25 1 BLANCHARD NO. 11 ROTARY SURFACE WITH 16" MAGNETIC CHUCK, 15 HP, S/N: 26 1 RUEMELIN 20" X 30" SHOT BLAST CABINET S/N: 27 1 BLISS NO. 19 OBI MECHANICAL PUNCH PRESS WITH 10 TON CAPACITY, S/N: 4609 (CI) 28 1 GRIEVE HENRY HX-500 ELECTRODE STABILIZING OVEN S/N: (CI) 29 1 MFG N/A 4" BELT SANDER 30 1 DUST COLLECTION ENCLOSURE (CI) 31 1 BUTCHER BLOCK TABLE 32 1 WORK BENCH 33 1 WORK BENCH 34 1 WORK BENCH 35 1 LOT/ CABINET WITH CONTENTS 36 1 BALTEC RN231 INSERTION S/N: BALTEC RN231 INSERTION S/N: BALTEC RN231 INSERTION S/N: BALTEC RN231 INSERTION S/N: BALTEC RN231 INSERTION S/N:

3 41 1 SPX POWER TEAM SPE15013DS S, 42 1 SPX POWER TEAM SPE15013DS S, 43 1 SPX POWER TEAM SPE15013DS S, 44 1 SPX POWER TEAM SPE15013DS S, 45 1 SPX POWER TEAM SPE15013DS S, 46 1 SPX POWER TEAM SPE15013DS S, 47 1 SPX POWER TEAM SPE15013DS S, 48 1 SPX POWER TEAM SPE15013DS S, 49 1 SPX POWER TEAM SPE15013DS S, 50 1 SPX POWERTEAM HYDRAULIC CYLINDER 51 1 ENERPAC IPH10030 HYDRAULIC H-FRAME PRESS WITH 100 TON CAPACITY, ENERPAC E4 Z CLASS DIGITAL 1.5 HP HYDRAULIC POWER PACK, 52 1 ENERPAC IPH10030 HYDRAULIC 53 1 ENERPAC IPH10030 HYDRAULIC 54 1 ENERPAC IPH10030 HYDRAULIC 2

4 55 1 ENERPAC IPH10030 HYDRAULIC 56 1 ENERPAC IPH10030 HYDRAULIC 57 1 ENERPAC IPH10030 HYDRAULIC 58 1 ENERPAC IPH10030 HYDRAULIC 59 1 ENERPAC IPH10030 HYDRAULIC 60 1 ENERPAC IPH10030 HYDRAULIC 61 1 ENERPAC IPH10030 HYDRAULIC 62 1 ENERPAC IPH10030 HYDRAULIC 63 1 SPX POWERTEAM 10HP 64 1 SPX POWERTEAM 10HP 65 1 SPX POWERTEAM 10HP 66 1 SPX POWERTEAM 10HP 67 1 SPX POWERTEAM 10HP 68 1 SPX POWERTEAM 10HP 69 1 SPX POWERTEAM 10HP 70 1 SPX POWERTEAM 3HP 71 1 SPX POWERTEAM 3HP 72 1 SPX POWERTEAM 3HP 73 1 ENERPAC 3HP HYDRAULIC POWER PACK 74 1 ENERPAC 3HP HYDRAULIC POWER PACK 75 1 ENERPAC 3HP HYDRAULIC POWER PACK 76 1 ENERPAC 3HP HYDRAULIC POWER PACK 77 1 ALLTECH ENGINEERING (2014) CGS2-HD DISC BRAKE PAD SURFACE /SLOTTER/ CHAMFER WITH 12 HP 12" DIAMOND PLATED COARSE AND FINE GRINDING CUP WHEELS, 12 HP 8" DIAMOND PLATED THIN SLOTTING WHEEL, (2) 9 HP DIAMOND PLATED CHAMFER CONE WHEELS, S/N: CGS (CI) 78 1 DONALDSON TORIT DFT3-6 CARTRIDGE TYPE DUST COLLECTOR WITH 5 HP MOTOR, S/N: IG (CI) 79 1 HYTROL 6" PADDLED BELT INCLINE CONVEYOR (CI) 3

5 80 1 ALLTECH ENGINEERING (2003) CGS2-HD DISC BRAKE PAD SURFACE /SLOTTER/ CHAMFER WITH 12 HP 12" DIAMOND PLATED COARSE AND FINE GRINDING CUP WHEELS, 12 HP 8" DIAMOND PLATED THIN SLOTTING WHEEL, (2) 9 HP DIAMOND PLATED CHAMFER CONE WHEELS, S/N: CGS2- HD (CI) 81 1 DONALDSON TORIT DFT3-6 CARTRIDGE TYPE DUST COLLECTOR WITH 5 HP MOTOR, S/N: IG (CI) 82 1 HYTROL 6" PADDLES INCLINE BELT CONVEYOR (CI) 83 1 LOT/ DISC BRAKE PAD GRINDING DIES AND MOLD 84 1 LOT/ DISC BRAKE PAD GRINDING DIES AND MOLD 85 1 LOT/ MISC. ALLTECH PARTS 86 1 CORSTEEL CH1742 SURFACE /SLOTTER/CHAMFER WITH 25 HP 14" DIAMOND PLATED GRINDING CUP WHEEL, 10 HP 10" DIAMOND PLATED THIN SLOTTING WHEEL, (2) 10 HP DIAMOND PLATED CHAMFER CONE WHEELS, S/N: 87 1 UNITED AIR SPECIALISTS SFC6-3 CARTRIDGE TYPE DUST COLLECTOR WITH 10 HP MOTOR, S/N: (CI) 88 1 HYTROL PADDLED INCLINE BELT CONVEYOR (CI) 89 1 LOT/ CORSTEEL PARTS WITH BENCH 90 1 ALL-FILL BULK TUBE FILLING MACHINE WITH CERBUS SHA 600 CONTROL (RETROFIT 2009) S/N: " STAINLESS STEEL ROTARY UNSCRAMBLER TABLE " STAINLESS STEEL ROTARY ACTUATOR TABLE 93 1 CUSTOM MFG MATERIAL TRANSFER AND STORAGE DRUM DUMPSTER (CI) 94 1 CUSTOM MFG MATERIAL TRANSFER AND STORAGE DRUM DUMPSTER (CI) 95 1 CORSTEEL (2011) HYDRAULIC CURING PRESS WITH EZ DURAPANEL TOUCH SCREEN PLC CONTROL, 400 TON CAPACITY, 15" STROKE, 2.5" DAYLIGHT CLEARANCE, 20" CYLINDER BORE, S/N: 96 1 CORSTEEL (2006) SS6D PRE HYDRAULIC CURING PRESS WITH UNIOP PLC CONTROL, 400 TON CAPACITY, 46" LIFTING TABLE, 15" STROKE, 2.5" DAYLIGHT CLEARANCE, 20" CYLINDER BORE, S/N: CH (CI) 97 1 CORSTEEL S86D PRE HYDRAULIC CURING PRESS WITH UNIOP PLC CONTROL, 400 TON CAPACITY, 46" LIFTING TABLE, 15" STROKE, 2.5" DAYLIGHT CLEARANCE, 20" CYLINDER BORE, S/N: CH (CI) 98 1 CORSTEEL (2011) HYDRAULIC DUAL LAYER PREFORM PRESS WITH EZ DURAPANEL SE SERIES TOUCH SCREEN PLC CONTROL, 75 TON CAPACITY, 12" STROKE, 31" DAYLIGHT CLEARANCE, 8" CYLINDER BORE, 18.5"X18.5" BED, 15,267 HRS, S/N: N/A 99 1 CORSTEEL (2012) PF HYDRAULIC PREFORM PRESS WITH UNIOP PLC CONTROL, 75 TON CAPACITY, 12" STROKE, 24" DAYLIGHT CLEARANCE, 8" CYLINDER BORE, 18.5"X18.5" BED, S/N: CH (CI) CORSTEEL 75-TNDL-PREF HYDRAULIC PREFORM PRESS WITH 75 TON CAPACITY, 12" STROKE, 24" DAYLIGHT CLEARANCE, 8" CYLINDER BORE, 18.5"X18.5" BED, S/N: CH (CI) LOT/ BRAKE PAD DIES LOT/ BRAKE PAD DIES LOT/ BRAKE PAD DIES LOT/ BRAKE PAD DIES 4

6 105 1 LOT/ BRAKE PAD DIES LOT/ BRAKE PAD DIES LOT/ BRAKE PAD MOLDS LOT/ BRAKE PAD MOLDS LOT/ BRAKE PAD MOLDS LOT/ BRAKE PAD MOLDS LOT/ BRAKE PAD MOLDS LOT/ BRAKE PAD MOLDS LOT/ MISC. CORSTEEL PRESS PARTS METFIN (2005) SERIES I MODEL 600 ROTO BLAST SYSTEMS WITH GE FANUC QUICK PANELVIEW TOUCH SCREEN PLC CONTROLS, 6 CU/FT, 20 HP, SINGLE WHEEL, INTEGRAL DUST COLLECTOR, LOADER, S/N: 1007 (CI) METFIN (2005) SERIES I MODEL 600 ROTO BLAST SYSTEMS WITH GE FANUC QUICK PANELVIEW TOUCH SCREEN PLC CONTROLS, 6 CU/FT, 20 HP, SINGLE WHEEL, INTEGRAL DUST COLLECTOR, LOADER, S/N: 1068 (CI) LOT/ METFIN MISC. SPARE PARTS NORDSON CK-1800 ELECTROSTATIC POWDER COATING SYSTEM WITH NORDSON CONTROL, (4) VERSA SPRAY GUNS, NORDSON MR- 150 ROUND FEED HOPPER, NORDSON CYCLO-KINETIC SEPARATOR, 90"X48"X56" BOOTH CANOPY, S/N: LOT/ NORDSON MISC. PARTS (CI) 118A 1 DIEMCO 4 NOZZLE POWDER COATING BOOTH LOT/ RADIANT ENERGY SYSTEMS DUAL ZONE INFRA-RED CONVEYOR OVEN LINE CONSISTING OF LOTS 120,121,122 (CI) MFG N/A 40" RUBBERIZED GLUE APPLICATOR MACHINE S/N: DEIMCO 12' X 4' INCLINE CHAIN BELT CONVEYOR S/N: FORMER ASSETS OF TEK-MOTIVE, INC RADIANT ENERGY SYSTEMS DUAL ZONE INFRA-RED CONVEYOR OVEN WITH DIGITAL TEMPERATURE CONTROLS, 400 DEG. F. MAX. TEMP., 50"X3" APERTURE, ADJUSTABLE SPEED S/N: GLOBAL FINISHING SOLUTIONS FAST-PAK SPRAY BOOTH WITH 121"X108"X97" INTERIOR DIMENSIONS, POWER, LIGHTS, EXHAUST, FIRE CONTROL, S/N: GRIEVE WTC NATURAL GAS BATCH OVEN WITH 325 DEG. F. MAX. TEMP., 5 HP, PARTLOW MRC 5000 HUMIDITY METER, HONEYWELL DIGITAL TEMPERATURE GAUGE, 74"X60"X90" INTERIOR DIMENSIONS, S/N: (CI) CONTROLLED PYROLYSIS ATR NATURAL GAS CLEANING FURNACE WITH 800 DEG. F. MAX. TEMP., HONEYWELL DIGITAL TEMPERATURE CONTROL, 84"X84"X66" INTERIOR DIMENSIONS, S/N: PATTERSON KELLEY TWIN SHELL MIXER WITH 30 CU/FT. CAPACITY, 10 HP SHELL, S/N: (CI) PATTERSON KELLEY TWIN SHELL MIXER WITH 20 CU/FT. CAPACITY, 5 HP SHELL, S/N: (CI) PATTERSON KELLEY TWIN SHELL BENCH TYPE MIXER S/N: N/A QUINCY (2017) QDGV-30 ROTARY SCREW AIR COMPRESSOR WITH 30 HP, AIRLOGIC DIGITAL CONTROL, 1080 HOURS RECORDED AT TIME OF LISTING, S/N: ITJ (CI) 129A 1 HPS 40KVA TRANSFORMER MTA (2014) DEO175 DRY ENERGY HYBRID AIR DRYER, S/N: (CI) 130A 1 MTA DRY ENERGY REFRIGERATED AIR COMPRESSOR 5

7 131 1 QUINCY QR-5120 TANK MOUNTED PISTON TYPE AIR COMPRESSORS WITH 15 HP, S/N: QUINCY QR-5120 TANK MOUNTED PISTON TYPE AIR COMPRESSORS WITH 15 HP, S/N: INGERSOLL-RAND T30 TANK MOUNTED PISTON TYPE AIR COMPRESSOR WITH 7.5 HP, S/N: NAR CURTIS PISTON TYPE TANK MOUNTED AIR COMPRESSOR S/N: 134A 1 SCALE PISTON TYPE AIR COMPRESSOR SPEEDAIRE PORTABLE SHOP COMPRESSOR S/N: N/A MTA AIR DRYER, S/N: MTA (2011) TAE-EVO 161 CHILLER UNIT WITH 40,000 HP, 149 DEG. F. MAX. TEMP., S/N: (CI) DONALDSON TORIT DFT3-12 CARTRIDGE TYPE DUST COLLECTOR WITH 15 HP MOTOR, S/N: IG (CI) DONALDSON TORIT SDF- 4 CARTRIDGE TYPE DUST COLLECTOR WITH 5 HP MOTOR, S/N: IG (CI) TORIT DUST COLLECTOR S/N: LANTECH Q-SERIES SEMI- AUTOMATED STRETCH WRAPPING SYSTEM, S/N: SHANKLIN T71 SHRINK TUNNEL WITH SHANKLIN CONTROL, TUNNEL SIZE 36"X68.5"X92", SPEEDS TO 150 FT./MIN, S/N: T WITH SHANKLIN F1AC FORM FILL SEAL SHRINK WRAPPER WITH SHANKLIN PLC CONTROL, 16"X6" MAX. PACKAGE SIZE, S/N: FAC (CI) CHICAGO TAPERS AUTOMATED BOX TAPING MACHINE S/N: VIDEOJET P3400 DIGITAL LABEL PRINTER/APPLICATOR S/N: VIDEOJET EXCEL 2000 OPAQUE DIGITAL INKJET CODING MACHINE, S/N: W8 (CI) VIDEOJET 1520 DIGITAL INKJET CODING MACHINE, S/N: C22ZH MITSUBISHI 2FBC25 ELECTRIC FORKLIFT WITH 5000 LB. CAPACITY, 36V, 198" MAX. REACH, 3 STAGE MAST, INDOOR TIRES, SIDE SHIFT, ROTARY FORK ATTACHMENT, S/N: A2BC MITSUBISHI 2FBC18 ELECTRIC FORKLIFT WITH 3100 LB. CAPACITY, 36/48V, 190" MAX. REACH, 3 STAGE MAST, INDOOR TIRES, SIDE SHIFT, S/N: A2BC TOYOTA 7FBCU18 ELECTRIC FORKLIFT WITH 2900 LB. CAPACITY, 36V, 189" MAX. REACH, 3 STAGE MAST, SIDE SHIFT, INDOOR TIRES, S/N: TOYOTA 7FBEU18 ELECTRIC FORKLIFT WITH 2900 LB. CAPACITY, 36V, 189" MAX. REACH, 3 STAGE MAST, SIDE SHIFT, INDOOR TIRES, S/N: MITSUBISHI FBC15 ELECTRIC FORKLIFT WITH 2700 LB. CAPACITY, 36/48V, 189" MAX. REACH, 3 STAGE MAST, INDOOR TIRES, S/N: AFB MITSUBISHI FBC18N ELECTRIC FORKLIFT WITH 1900 LB. CAPACITY, 36/48V, 188" MAX. REACH, 3 STAGE MAST, INDOOR TIRES, SIDE SHIFT, S/N: A4BC NORTHEAST 36V CHARGER (CI) NORTHEAST 36V CHARGER (CI) BISHAMON 3000LBS CAPACITY BISHAMON 3000LBS CAPACITY BISHAMON 3000LBS CAPACITY BISHAMON 3000LBS CAPACITY 6

8 159 1 BISHAMON 3000LBS CAPACITY BISHAMON 3000LBS CAPACITY SHIPPING SCALE ELANTECH ALMP1720 PLASTIC SEALING MACHINE S/N: LIFTING BASKET LOT/ PRESS CONTROLS WITH TABLE CRAFTSMAN 10" TABLE SAW ARC WELDER DO ALL SURFACE MSC UNIVERSAL MILL (NO HEAD) " MACHINE VISE LOT/ (11) SECTIONS OF PALLET LOT/ (6) SECTIONS OF PALLET LOT/ (6) SECTIONS OF PALLET LOT/ (6) SECTIONS OF PALLET LOT/ (6) SECTIONS OF PALLET LOT/ (6) SECTIONS OF PALLET LOT/ (4) SECTIONS OF PALLET LOT/ (7) SECTIONS OF PALLET LOT/ (7) SECTIONS OF PALLET LOT/ (7) SECTIONS OF PALLET LOT/ (6) SECTIONS OF PALLET LOT/ (3) SECTIONS OF PALLET LOT/ (3) SECTIONS OF PALLET LOT/ (3) SECTIONS OF PALLET LOT/ (4) SECTIONS OF PALLET FORMER ASSETS OF TEK-MOTIVE, INC LOT/ (4) SECTIONS OF PALLET LOT/ (4) SECTIONS OF PALLET LOT/ (5) SECTIONS OF PALLET LOT/ (6) SECTIONS OF PALLET LOT/ (5) SECTIONS OF PALLET LOT/ (5) SECTIONS OF PALLET LOT/ (5) SECTIONS OF PALLET LOT/ (5) SECTIONS OF PALLET LOT/ (5) SECTIONS OF PALLET LOT/ (4) SECTIONS OF PALLET JOHN DEERE 870 TRACTOR WITH JOHN DEERE 3TN84-RJK DIESEL ENGINE, JOHN DEERE 440 ARTICULATED BUCKET ATTACHMENT WITH 73" BUCKET, 3309 HRS RECORDED AT TIME OF LISTING, S/N: N/A HUDSON TWIN AXLE FLAT DECK TRAILER WITH 16'X8' WOOD PLANK DECK, LOADING RAMPS, SPARE TIRE WELL, VIN: N/A LOT/ PLASTIC BINS LOT/ PLASTIC BINS LOT/ CABINETS AND WORK TABLES LOT/ FIRE PROOF CABINET A-FRAME LADDER SHIPPING SCALE LOT/ BARREL TIPPER AND DOLLY LOT/ CARTS STEP LADDER LIFTING CART DIE CART LOT/ FANS LOT/ FANS STEP LADDER 7

9 211 1 STEP LADDER STEP LADDER LOT/ TABLES LOT/ WIRE MESH BINS LOT/ OIL DRIP TRAYS LOT/ TABLES PUMP TRUCK PUMP TRUCK PUMP TRUCK LOT/ EQUIPMENT GUARDS BELT CONVEYOR LOT/ ROLLING DRYING RACKS MORSE BARREL TIPPER LOT/ PALLET UP RIGHTS LOT/ SURPLUS EQUIPMENT DIE CART LOT/ SHOP CARTS STEP LADDER FIRE PROOF CABINET DIE CART TABLE LOT/ SHOP FANS TABLE TABLE TABLE LOT/ WIRE MESH BINS LOT/ WIRE MESH BINS TRANSFORMER 239A 1 TRANSFORMER 8