GLOBAL METAL FABRICATING AND FORMING INC.

Transcription

1 WEDNESDAY, JUNE 21, 2017 *** 10:30 A.M. EDT *** WELCOME TO THE AUCTION SALE OF GLOBAL METAL FABRICATING AND FORMING INC BARRON ROAD, NIAGARA FALLS, ONTARIO, CANADA, L2E 6S5 TERMS & CONDITIONS FINAL PAYMENT IN FULL IMMEDIATELY AFTER THE AUCTION A BUYER S PREMIUM OF 16.0% FOR ALL ONSITE BIDDERS AND 18.0% FOR ALL WEBCAST (REMOTE) BIDDERS WILL APPLY AT THIS SALE NO PAYMENTS WILL BE ACCEPTED BY OUR SITE SUPERVISOR REMOVAL DETAILS: SMALL ITEMS NO LATER THAN 5:00 PM ON THURSDAY, JUNE 22, 2017 REMAINING ITEMS NO LATER THAN 5:00 PM FRIDAY, JULY 7, 2017 CI DESIGNATES THAT A PROPER CERTIFICATE OF INSURANCE, ADDING CORPORATE ASSETS INC. AS AN ADDITIONAL INSURED AND A WORKERS COMPENSATION CLEARANCE CERTIFICATE, IS REQUIRED BEFORE ANY ITEM MARKED CI CAN BE MECHANICALLY REMOVED. ITEMS NOT PRICED THAT REQUIRE RIGGING WILL BE CAD $30.00 PER LIFT OR CAD $ PER HOUR PLUS MATERIALS I.E. SKIDS, BOXES, WRAPPING, ETC. FOR ITEMS MARKED TBD, THE RIGGING FEES ARE YET TO BE DETERMINED ALL PRICES ARE AS LOADED ON YOUR TRUCK AND IN ACCORDANCE WITH THE TERMS AND CONDITIONS OF SALE TRANSPORTATION IS EXTRA FURTHERMORE, PROPERLY AUTHORIZED RIGGER RELEASE INSTRUCTIONS, IN WRITING, ARE REQUIRED BEFORE A RIGGER CAN COMMENCE REMOVAL OF THESE ITEMS NO ITEMS MAY BE REMOVED WHILE AUCTION IS IN PROGRESS THE EXCLUSIVE RIGGER FOR THIS SALE: CANADIAN INDUSTRIAL SERVICES PHONE: DON@TEAMCIS.CA NO EXCEPTIONS! THANK YOU 74 Berkeley Street, Toronto, Ontario, M5A 2W7 Tel Fax: NOW ACCEPTING: Visit for specific terms and conditions.

2 1 1 UNIBOR MAG BASE DRILL 2 1 ROTABROACH MAG BASE DRILL 3 1 HOLEMAKER MAG BASE DRILL 4 1 SLUGGER MAG BASE DRILL 5 1 SLUGGER MAG BASE DRILL 6 1 HOUGEN MAX MAG BASE DRILL 7 1 HITATCHI MAG BASE DRILL 8 1 LOT/ HOLE CUTTERS 9 1 LOT/ HOLE CUTTERS 10 1 BOSCH BOSCHHAMMER HEAVY DUTY ROTARY HAMMER DRILL 11 1 LOT/ CONCRETE DRILLS 12 1 MAKITA ANGLE DRILL 13 1 MAKITA ANGLE DRILL 14 1 MILWAUKEE RECIPROCATING SAW 15 1 MILWAUKEE RECIPROCATING SAW 16 1 HEAVY DUTY ELECTRIC DRILL 17 1 HITACHI DH40FR ROTARY HAM- MER DRILL 17A 1 HITACHI DH40FR ROTARY HAM- MER DRILL 18 1 MILWAUKEE HEAVY DUTY ELEC- TRIC DRILL 19 1 DEWALT HEAVY DUTY ELECTRIC DRILL 20 1 DEWALT ELECTRIC DRILL 21 1 MAKITA ELECTRIC DRILL 22 1 LOT/ ELECTRIC DRILLS 23 1 LOT/ ELECTRIC DRILLS 24 1 LOT/ ELECTRIC DRILLS 25 1 LOT/ ELECTRIC DRILLS 26 1 STIHL MS440 GAS POWERED CHAIN SAW 26A 1 STIHL M5441C GAS POWERED CHAINSAW 27 1 BOSCH 7 1/4" CIRCULAR SAW 28 1 MAKITA 7 1/4" CIRCULAR SAW 29 1 RYOBI 7 1/4" CIRCULAR SAW 30 1 MILWAUKEE 10 1/4" CIRCULAR SAW 31 1 MAKITA ABRASIVE CUT OFF SAW 32 1 DEWALT ABRASIVE CUT OFF SAW 33 1 POWER FIST ABRASIVE CUT OFF SAW 34 1 LOT/ 550 LB. CAP. CHAIN WINCHES 35 1 LIFTING MAGNET 36 1 LIFTING MAGNET 37 1 LOT/ TORQUE WRENCHES 38 1 LOT/ DEWALT CORDLESS TOOLS 39 1 MAKITA CORDLESS DRILL AND CHARGER (NO BATTERIES) 40 1 MASTER CRAFT HEAT GUN 41 1 HITACHI CJ65VA2 ELECTRIC JIG SAW 42 1 ELECTRIC BUFFER 43 1 PNEUMATIC NAILER 44 1 LOT/ PNEUMATIC NEEDLE SCALERS 45 1 LOT/ PNEUMATIC TOOLS 46 1 LOT/ PNEUMATIC RIVETERS 47 1 HEAVY DUTY ANGLE GRINDER 48 1 HEAVY DUTY ANGLE GRINDER 49 1 HEAVY DUTY ANGLE GRINDER 1

3 50 1 HEAVY DUTY ANGLE GRINDER 51 1 HEAVY DUTY ANGLE GRINDER 52 1 HEAVY DUTY ANGLE GRINDER 53 1 HEAVY DUTY ANGLE GRINDER 54 1 HEAVY DUTY ANGLE GRINDERS 55 1 LOT/ MAKITA ANGLE GRINDERS 56 1 LOT/ MAKITA ANGLE GRINDERS 57 1 LOT/ MAKITA ANGLE GRINDERS 58 1 LOT/ MAKITA ANGLE GRINDERS 59 1 LOT/ ELECTRIC DIE GRINDERS 60 1 PNEUMATIC 1" IMPACT GUN 61 1 PNEUMATIC 1" IMPACT GUN 62 1 ELECTRIC 3/4" IMPACT GUN 63 1 ELECTRIC 3/4" IMPACT GUN 64 1 ELECTRIC 3/4" IMPACT GUN 65 1 ELECTRIC 1/2" IMPACT GUN 66 1 ELECTRIC 1/4" IMPACT GUN 67 1 MASTER CRAFT MAXIMUM 1/2" CORDLESS IMPACT GUN WITH CHARGER AND 2 BATTERIES 68 1 LOT/ HAND TOOLS 69 1 LOT/ PIPE WRENCHES " PIPE WRENCH " PIPE WRENCH " PIPE WRENCH 73 1 LOT/ WRENCHES 74 1 LOT/ WRENCHES 75 1 LOT/ WRENCHES 76 1 LOT/ SOCKETS 77 1 LOT/ SOCKETS 79 1 JET 3/4" DRIVE SOCKET SET 80 1 LOT/ RACHETS 81 1 HYDRAULIC JACK SET 82 1 ENERPAC HYDRAULIC JACK 83 1 PULLER SET 84 1 MASTER CRAFT 2 US GALLON AIR COMPRESSOR 85 1 HEATER 86 1 LOT/ HYDRAULIC JACKS AND STANDS 87 1 LOT/ COME-A-LONGS /2 TON COME-A-LONG TON CHAIN FALL TON CHAIN FALL 91 1 TOOL BOX CART 92 1 TOOL BOX CART 93 1 LOT/ EXTENSION CORDS 94 1 EMERGENCY SPILL KIT 95 1 LOT/ BESSEY CLAMPS 96 1 LOT/ BESSEY CLAMPS 97 1 LOT/ BESSEY CLAMPS 98 1 LOT/ BESSEY CLAMPS 99 1 LOT/ BESSEY CLAMPS LOT/ BESSEY CLAMPS LOT/ BESSEY CLAMPS LOT/ BESSEY CLAMPS LOT/ BESSEY CLAMPS LOT/ BESSEY CLAMPS LOT/ BESSEY CLAMPS LOT/ BESSEY CLAMPS 78 1 LOT/ SOCKETS 2

4 107 1 POWER FIST HYDRAULIC 16 TON PIPE BENDER POWER FIST COMPACT FLOOR PIPE BENDER TABLE TYPE WELDING POSITIONER AIRCO OXY/ACC TRACK CUTTER LOT/ OXY/ACC TORCH CADDIES WITH HOSES LINCOLN ELECTRIC SQUARE WAVE TIG-350 WITH BERNARD CHILLER S/N: AC ESAB HELIARC 352 AC/DC TIG WELDER S/N: N/A LINDE L-TEC HELIARC 250HF SQUARE WAVE TIG WELDER S/N: N/A HYPERTHERM POWERMAX 1000 G3 SERIES PLASMA CUTTER WITH CABLES AND GUN, S/N N/A MULTIQUIP WHISPERWELD DLW-300ESA DIESEL WELDER GENERATOR WITH KUBOTA INLINE 4 DIESEL ENGINE, CABLES AND GUN, S/N N/A LINCOLN ELECTRIC RANGER 8 GAS POWERED WELDER GENERATOR WITH CABLES AND GUN, S/N N/A MILLER MILLERMATIC 251 DIGITAL MIG WELDERS WITH CABLES AND GUN, S/N N/A MILLER MILLERMATIC 251 DIGITAL MIG WELDERS WITH CABLES AND GUN, S/N N/A MILLER MILLERMATIC 251 DIGITAL MIG WELDERS WITH CABLES AND GUN, S/N N/A COMPARC MM-302 DIGITAL MIG WELDER WITH COMPARC COM604 WIRE FEEDER, CABLES AND GUN, S/N N/A MILLER DELTAWELD 650 MIG WELDER WITH MEMCO WIRE FEEDER, CABLES AND GUN, S/N N/A MILLER CH300 MIG WELDER WITH MILLER MILLERMATIC S-54D WIRE FEEDER, CABLES AND GUN, S/N N/A HOBART RC250 MIG WELDER WITH CANOX MIGMATIC C-S 54A WIRE FEEDER, CABLES AND GUN, S/N N/A HOBART CYBERPRO 302 MIG WELDER WITH MILLER 70 SERIES WIRE FEEDER, CABLES AND GUN, S/N N/A ARCWELD 650A MIG WELDER WITH MFG N/A WIRE FEEDER, CABLES AND GUN, S/N N/A CANOX C-650-BW MIG WELDER WITH CANOX WIRE FEEDER, JIB ARM, CABLES AND GUN, S/N N/A LINDE L-TEC UCAR VI-450SS MIG WELDER S/N N/A LINDE L-TEC VI-300 MIG LINDE L-TEC VI-300 MIG LINDE L-TEC VI-300 MIG LINDE L-TEC VI-300 MIG LINDE L-TEC VI-253 MIG LINDE L-TEC VI-253 MIG LINDE L-TEC VI-253 MIG LINDE L-TEC VI-253 MIG LINDE L-TEC VI-253 MIG 3

5 138 1 LINDE L-TEC VI-253 MIG LINDE L-TEC VI-252 MIG LINDE L-TEC VI-250 WELDING POWER SOURCE, S/N N/A CEBORA 181C MIG WELDER, S/N N/A LINCOLN ELECTRIC IDEALARC 250 ARC WELDER, CABLES AND GUN, S/N N/A LINCOLN ELECTRIC IDEALARC 250 ARC WELDER, CABLES AND GUN, S/N N/A LOT/ GOUGING AND ARC ELECTRODES LOT/ MIG WIRE LOT/ ARC ELECTRODES LOT/ WELDING SUPPLIES LOT/ WELDING SUPPLIES LOT/ WELDING SUPPLIES LOT/ WELDING SUPPLIES GULLCO ELECTRODE STABILIZING OVEN DRY ROD II ELECTRODE STABILIZING OVEN JET 8" DOUBLE END GRINDER JET 8" DOUBLE END GRINDER CRAFTEX 8" DOUBLE END GRINDER TRADEMASTER 6" DOUBLE END GRINDER BOLDER DOUBLE END PEDESTAL GRINDER KING INDUSTRIAL COMBINATION 6" X 48" BELT AND 12" DISC SANDER KING INDUSTRIAL COMBINATION 6" X 48" BELT AND 12" DISC SANDER KING INDUSTRIAL COMBINATION 6" X 48" BELT AND 12" DISC SANDER RIDGID 535 PIPE THREADER RIDGID 535 PIPE THREADER RIDGID No. 460 TRISTAND KING CANADA BENCH TYPE DRILL PRESS DUREX FLOOR TYPE DRILL PRESS KING INDUSTRIAL FLOOR TYPE DRILL PRESS ARBOR PRESS BUSY BEE BO13 HORIZONTAL BAND SAW VERTICUT ROLL-IN TYPE VERTICAL BAND SAW, S/N N/A DO-ALL DBW-15 VERTICAL BAND SAW WITH 20" THROAT, 30" X 24" T-SLOT TABLE, BLADE SPEEDS TO 5200RPM, BLADE WELDER, S/N: (CI) 170R 1 RIGGING FEE FOR LOT #170 SERVICES - $ PLUS TAXES POWERFIST 10,000 PSI H-FRAME SHOP PRESS (CI) HANSFORD DAVIS KEY SEATER WITH 31" X 20" T-SLOT TABLE, S/N: N/A (CI) 172R 1 RIGGING FEE FOR LOT #172 SERVICES - $ PLUS TAXES DAHLI DL -GH950 UNIVERSAL MILL WITH 53" X 12" T-SLOT TABLE, SPEEDS TO 3800RPM, FAGOR 3 AXIS DRO, S/N: (CI) 4

6 173R 1 RIGGING FEE FOR LOT #173 SERVICES - $ PLUS TAXES " MACHINE VISE KBC T4MVIS VERTICAL MILL WITH 42" X 9" T-SLOT TABLE, SPEEDS TO 4200RPM, 2.2HP, S/N: N/A (CI) 175R 1 RIGGING FEE FOR LOT #175 SERVICES - $ PLUS TAXES FIRST LC-18VSG VERTICAL MILL WITH 49" X 9" T-SLOT TABLE, SPEEDS TO 4500RPM, DYNAMICS 2 AXIS DRO, S/N: (CI) 176R 1 RIGGING FEE FOR LOT #176 SERVICES - $ PLUS TAXES " MACHINE VISE NANTONG XJ632SA VERTICAL MILL WITH 44" X 9" T-SLOT TABLE, SPEEDS TO 4760RPM, ALIGN POWER TABLE, VERTICAL SLOTTING HEAD, S/N: (CI) 178R 1 RIGGING FEE FOR LOT #178 SERVICES - $ PLUS TAXES " MACHINE VISE TOS SN50C GAP BED ENGINE LATHE WITH 22" SWING OVER BED, 28" SWING IN THE GAP, 78" BETWEEN CENTERS, 2" SPINDLE BORE, 10" 4 JAW CHUCK, SPEEDS TO 2000RPM, IN/MM THREADING, STEADY REST, COOLANT, S/N: (CI) 180R 1 RIGGING FEE FOR LOT #180 SERVICES - $ PLUS TAXES RUNMASTER RUN B GAP BED ENGINE LATHE WITH 22" SWING OVER BED, 31" SWING IN THE GAP, 59" BETWEEN CENTERS, 3 " SPINDLE BORE, 12" 4 JAW CHUCK, SPEEDS TO 1600RPM, FAGOR 2 AXIS DRO, IN/MM THREADING, STEADY REST, COOLANT, S/N: (CI) 181R 1 RIGGING FEE FOR LOT #181 SERVICES - $ PLUS TAXES CHIENYEH CY405X1000G ENGINE LATHE WITH 14" SWING OVER BED, 36" BETWEEN CENTERS, 2" SPINDLE BORE, 8" CHUCK, SPEEDS TO 1200RPM, IN/MM THREADING, STEADY REST, COOLANT, S/N: N/A 182R 1 RIGGING FEE FOR LOT #182 SERVICES - $ PLUS TAXES STANDARD MODERN 1340 TOOL ROOM LATHE WITH 14" SWING, 43" BETWEEN CENTERS, 1 " SPINDLE BORE, 6" 3 JAW CHUCK, SPEEDS TO 2000RPM, IN/MM THREADING, S/N: (CI) 183R 1 RIGGING FEE FOR LOT #183 SERVICES - $ PLUS TAXES " 4 JAW CHUCK " 4 JAW CHUCK " 3 JAW CHUCK " 3 JAW CHUCK " 3 JAW CHUCK " 4 JAW CHUCK " 3 JAW CHUCK MAS KOSOSVIT V050 RADIAL ARM DRILL, TRAVELS 32", SPEEDS TO 2500RPM, IN/MM THREADING, S/N: 4161 (CI) 5

7 191R 1 RIGGING FEE FOR LOT #191 SERVICES - $ PLUS TAXES " X 40" X 20" T-SLOT BOX TABLE UNION BFT100/IV TABLE TYPE HORIZONTAL BORING MILL WITH 4" SPINDLE DIAMETER, 59" X 52" T-SLOT TABLE, TRAVELS 91.5" LONGITUDINAL,91" TRAVERSE, 75.5" VERTICAL, 35" QUILL TRAVEL, SPEEDS TO 710RPM, #50 TAPER, HEIDENHEIN 2 AXIS DRO, S/N: 9951 (CI) 193R 1 RIGGING FEE FOR LOT #193 SERVICES - $3, PLUS TAXES LOT/ 50 TAPER TOOL HOLDERS " X 18 1/2" ANGLE PLATES " MACHINE VISE " MACHINE VISE " MACHINE VISE LOT/ DRILL VISES BENCH VISE WITH PEDESTAL LOT/ ANGLE PLATES " X 12" METAL SURFACE PLATE LOT/ DRILLS LOT/ DRILLS LOT/ DRILLS LOT/ END MILLS LOT/ END MILLS LOT/ TAPS AND DIES LOT/ TAPS LOT/ TAP AND DIE HANDLES LOT/ REAMERS LOT/ CUTTERS LOT/ FACE MILLS LOT/ LATHE TOOLING LOT/ BORING BARS LOT/ CARBIDE INSERTS LOT/ DRILLS WITH CABINET LOT/ TOOL SLEEVES LOT/ DRILL CHUCKS LOT/ DRILL CHUCKS LOT/ LIVE CENTERS LOT/ CENTERS TAPING HEAD LOT/ TOOL HOLDERS LOT/ 40 TAPER TOOL HOLDERS LOT/ 40 TAPER TOOL HOLDERS LOT/ OFF SET MICROBORE TOOL HOLDERS LOT/ 1,2,3 BLOCKS, PARALLELS AND V-BLOCKS LOT/ DEPTH GAUGES LOT/ INSPECTION EQUIPMENT LOT/ CYLINDRICAL SQUARE AND RING GAUGES LOT/ HEIGHT GAUGES " VERNIER " VERNIER " OUTSIDE MICROMETER SET BLOCK GAUGE SET STARRETT MACHINEST LEVEL " X 15" T-SLOT ANGLE TABLE LOT/ TIE DOWN CLAMPING 6

8 240 1 LOT/ THREAD GAUGES LOT/ THREAD GAUGES LOT/ THREAD GAUGES LOT/ THREAD GAUGES LOT/ THREAD GAUGES LOT/ THREAD GAUGES LOT/ DRILLS TOOL BOX CART PARTS WASHER LOT/ TOOL BOX CARTS DIE CART LOT/ CLAMPS LOT/ DRILLS LOT/ COLLETS TAPER TOOL HOLDER WITH COLLETS TAPER TOOL HOLDER WITH COLLETS BROACH AND GUIDE SET LOT/ GRINDING WHEELS LOT/ GRINDING WHEELS JET CAPTAIN ELECTRIC HACK SAW TELEDYNE PINE BENDER S/N: (CI) TELEDYNE PINE BENDER S/N: (CI) TELEDYNE PINE BENDER S/N: (CI) TELEDYNE PINE BENDER S/N: (CI) TELEDYNE PINE BENDER S/N: N/A (CI) JOB SITE TOOL BOX JOB SITE TOOL BOX JOB SITE TOOL BOX WIRE RACKS HYD-MECH S20A SERIES 2 AUTOMATIC HORIZONTAL BAND SAW WITH DIGITAL PROGRAMMABLE MICRO PROCESSOR CONTROL, 3HP, BUNDLING/FEEDING VISE, MITRE CAPABILITY, COOLANT, S/N: (CI) 269R 1 RIGGING FEE FOR LOT #269 SERVICES - $ PLUS TAXES COSEN AH-330ER HORIZONTAL BAND SAW WITH 3HP, BUNDLING/FEEDING VISE, MITRE CAPABILITY, COOLANT, S/N: N/A (CI) 270R 1 RIGGING FEE FOR LOT #270 SERVICES - $ PLUS TAXES ROLLER CONVEYOR ROLLER CONVEYOR LOT/ ROLLER CONVEYOR LOT/ METAL SAW HORSES LOT/ METAL SAW HORSES LOT/ METAL SAW HORSES LOT/ ROLLER STANDS GLOBAL/HYPERTHERM CNC PLASMA BURN TABLE WITH HYPERTHERM POWERMAX 105 PLASMA POWER SOURCE, 32' X 8' BURN TABLE, TRAVELS 33' X 8', 8" OVER TABLE, S/N: N/A (CI) 278R 1 RIGGING FEE FOR LOT #278 SERVICES - $3, PLUS TAXES MFG N/A PLATE ROLLS WITH 128" BENDING LENGTH, 10" ROLLS, S/N: N/A (CI) 7

9 280R 1 RIGGING FEE FOR LOT #280 SERVICES - $ PLUS TAXES PROMECAM RG 305 HYDRAULIC PRESS BRAKE WITH 300 TON CAPACITY, 16' OVERALL BENDING LENGTH, 178" IN BETWEEN HOUSINGS, S/N: N/A (CI) 281R 1 RIGGING FEE FOR LOT #281 SERVICES - $4, PLUS TAXES ' 4 WAY DIE ALLSTEEL 7010 HYDRAULIC PRESS BRAKE WITH 70 TON CAPACITY, 10' OVERALL BENDING LENGTH, 101" IN BETWEEN HOUSINGS, AUTOGAUGE G24 PROGRAMMABLE SINGLE AXIS CNC BACK GAUGE, S/N: 422 (CI) 283R 1 RIGGING FEE FOR LOT #283 SERVICES - $1, PLUS TAXES LOT/ BRAKE DIES SCOTCHMAN HYDRAULIC IRON WORKER, S/N: (CI) 285R 1 RIGGING FEE FOR LOT #285 SERVICES - $ PLUS TAXES LOT/ PUNCHES AND DIES JLG (2007) G9-43A TELEHANDLER FORKLIFT WITH 9000LBS CAPACITY, 43' MAX VERTICAL REACH, JOHN DEERE 99 HP DIESEL ENGINE, (ONLY 860 HOURS RECORDED ON METER AT THE TIME OF LISTING), S/N CLARK C500Y305 LPG OUTDOOR FORKLIFT WITH 8000LBS CAPACITY, 147" MAX REACH, 2 STAGE MAST, OUTDOOR CHAINED TIRES S/N: Y ALLIS CHALMERS ACC 30 LPS LPG FORKLIFT WITH 2850LBS CAPACITY, 156" MAX REACH, SINGLE STAGE MAST, CUSHION TIRES S/N: AFE STERLING (2002) TANDEM AXLE FLATBED BOOM TRUCK WITH CATERPILLAR C-12 INLINE 6 DIESEL ENGINE, EATON 8 SPEED MANUAL TRANSMISSION, 21' X 8' BED (RECENTLY REFURBISHED BOARDS), TEREX BT TON CAPACITY HYDRAULIC BOOM CRANE WITH MAX 134' REACH, POWER WINDOWS, POWER LOCKS, APPROX. 276,922KM (RECORDED ON ODOMETER), VIN: 2FZHAZA5X3AK8C A 1 FORD F350 (2012) CUBE VAN TRUCK WITH 6.4L V8 DIESEL ENGINE, AUTOMATIC TRANSMISSION, 2WD, CUBE BOX, VIN: N/A 290B 1 DEVAIR 33 GALLON HEAVY DUTY INDUSTRIAL GAS POWERED COMPRESSOR S/N: N/A (CI) 290C 1 KODIAK SXB5500HXS 120/240V GAS POWERED PORTABLE GENERATOR S/N: C D 1 LOT/ OXY-ACETYLENE TORCH GAUGES AND HOSE 290E 1 LOT/ REMAINING CONTENTS OF CARGO AREA FORD F150XL (2011) PICKUP TRUCK WITH 3.7L V6 ENGINE, AUTOMATIC TRANSMISSION, 2WD, REESE TRAILER BRAKE CONTROLLER, APPROX. 139,568KM (RECORDED ON ODOMETER) VIN: 1FTEX1CMXCFA FORD RANGER (2011) PICKUP TRUCK WITH 4.0L V6 ENGINE, 5 SPEED MANUAL TRANSMISSION, 2WD, APPROX. 98,000KM (RECORDED ON ODOMETER) VIN: 1FTKRFEE3BPA

10 293 1 FORD F350 (2004) FLATBED TRUCK WITH 5.4L V8 ENGINE, AUTOMATIC TRANSMISSION, 2WD, 9' X 6' CUSTOM ALUMINUM BOX, APPROX. 92,039KM (RECORDED ON ODOMETER) VIN: 1FDSF34L44ED FORD F250XL (2000) PICKUP TRUCK WITH 5.4L V8 ENGINE, AUTOMATIC TRANSMISSION, 2WD, APPROX. 311,757KM (RECORDED ON ODOMETER) VIN: 1FTNX20L5YEC GMC SIERRA (2005) 1500 PICKUP TRUCK WITH 4.8L V8 ENGINE, AUTOMATIC TRANSMISSION, 2WD, APPROX. 356,219KM (RECORDED ON ODOMETER) VIN: 1GTEC19V05Z MISKA TANDEM AXLE FLAT DECK TRAILER WITH 16' X 8' DECK (RECENTLY REFURBISHED BOARDS) 1500LBS CAPACITY VIN:2R9UTD MFG N/A SINGLE AXLE ENCLOSED FLAT DECK TRAILER WITH 8' X 5' DECK VIN: N/A WIP TANDEM AXLE PROJECT TRAILER VIN: N/A DV SYSTEMS 5HP PISTON TYPE TANK MOUNTED AIR COMPRESSOR S/N: (CI) PRO POINT 60 GALLON TANK MOUNTED AIR COMPRESSOR SEARS CRAFTSMAN 2 HP COMPRESSOR MOD-U-BLAST PORTABLE SAND BLASTER LOT/ EXTENSION AND "A" FRAME LADDERS LOT/ HARDWARE LOT/ CONTENTS OF RACK (HARDWARE) LOT/ SAFETY HARNESSES LOT/ CHAIN FALLS LOT/ LIFTING STRAPS PARTS WASHER LOT/ TORCHES LOT/ CONTENTS OF CABINET LOT/ CONTENTS OF CABINET LOT/ SURPLUS MATERIALS LOT/ WIRE RACK WITH CONTENTS LOT/ WIRE RACK WITH CONTENTS POWER FIST 1 TON CHAIN FALL WIRE RACK WITH WHEELS LOT/ TABLE WITH CONTENTS (PUNEUMATIC FITTINGS) LOT/ BIN WITH CONTENTS LOT/ STEP STOOLS ALTO-SHAAM CONVECTION OVEN PRO-POINT BENCH GRINDER STANDS LOT/ SKID WITH CONTENTS (VACUUM SEALER) KVA TRANSFORMER KVA TRANSFORMER LOT/ PARTS BIN RACKS WITH WHEELS TOPCON LASER TRANSIT WITH TRIPOD CST/BERGER 24X TRANSIT TOP-JR TRANSIT TRANSIT LOT/ TRIPODS BROCO TORCH 9

11 333 1 LOT/ 40 TAPER TOOL HOLDERS LOT/ 40 TAPER TOOL HOLDER WITH COLLETS LOT/ PARTS CABINET WITH DRILLS TEST CENTER BED PARTS CABINET LOT/ CONTENTS OF SHELF (HARDWARE AND CASTERS) LOT/ CONTENTS OF SHELVES LOT/ HARDWARE LOT/ STRAPPING CADDY BENCH VISE BENCH VISE BENCH VISE LOT/ SHOP FANS LOT/ SURPLUS MATERIALS LOT/ SURPLUS MATERIALS LOT/ SURPLUS MATERIALS LOT/ SURPLUS MATERIALS LOT/ BLACK LEXAN SHEETS LBS CAP. SPREADER BEAM LOT/ 2 TON SHEET LIFTERS LOT/ 2 TON SHEET LIFTERS MAGNETIC SHEET LIFTER MAGNETIC SHEET LIFTER LOT/ LIFTING CHAINS TOOL BOX CART PORTABLE POWER SOURCE WHEEL HAND CART HYDRAULIC PALLET JACK LOT/ RUBBER FLOOR MATTS FORKLIFT LIFTING BOOM ATTACHMENT JOB SITE TOOL STORAGE CONTAINER WEBSTER 3 HP COMPRESSOR LOT/ PAINT SPRAYER WITH PAINT POTS LOT/ MACHINERY DOLLIES POWERFIST TRAILER MOUNTED ELECTRIC LOG SPLITTER WITH 31 TON CAPACITY S/N: N/A LOT/ ROLLER STANDS DIE CART PORTABLE POWER SOURCE LOT/ BALANCE OF ROOM (RACKS AND CABINETS NOT INCLUDED) LOT/ PORTABLE GANTRY SYSTEM LOT/ STEEL PLATFORMS LOT/ SURPLUS MATERIALS (RACK NOT INCLUDED) LOT/ SURPLUS MATERIALS (RACK NOT INCLUDED) LOT/ SURPLUS MATERIALS (RACK NOT INCLUDED) LOT/ SURPLUS MATERIALS (RACK NOT INCLUDED) LOT/ SURPLUS MATERIALS (RACK NOT INCLUDED) LOT/ SHEET STEEL MATERIAL LOT/ SHEET STEEL MATERIAL LOT/ SHEET STEEL MATERIAL LOT/ SHEET STEEL MATERIAL LOT/ SHEET STEEL MATERIAL 10

12 384 1 LOT/ STEEL PLATFORMS BURN CONTAINER LOT/ SURPLUS EQUIPMENT (MOTORS AND ROLLERS) LOT/ SURPLUS METALS (STEEL "I" BEAMS AND ANGLED STEEL) LOT/ SURPLUS MATERIALS SEA CONTAINER WITH CONTENTS HAIER 46" FLATSCREEN TV LOT/ FLATSCREEN MONITORS, KEYBOARD AND MOUSE (NO CPU) LOT/ FLATSCREEN MONITORS, KEYBOARD AND MOUSE (NO CPU) LOT/ FLATSCREEN MONITORS, KEYBOARD AND MOUSE (NO CPU) LOT/ iphone SMART PHONES USB HEADSET MICROPHONE 11