EQUINE FORGINGS LTD.

Transcription

1 TUESDAY, DECEMBER 6, 2016 *** 10:30 A.M. EST *** WELCOME TO THE AUCTION SALE OF SURPLUS ASSETS OF EQUINE FORGINGS LTD. 577 INDUSTRIAL DRIVE, FORT ERIE, ONTARIO, L2A 5M4 TERMS & CONDITIONS FINAL PAYMENT IN FULL IMMEDIATELY AFTER THE AUCTION A BUYER S PREMIUM OF 18.0% FOR ALL WEBCAST (REMOTE) BIDDERS WILL APPLY AT THIS SALE NO PAYMENTS WILL BE ACCEPTED BY OUR SITE SUPERVISOR REMOVAL DATE: SMALL ITEMS NO LATER THAN 5:00 PM ON WEDNESDAY, DECEMBER 7, 2016 REMAINING ITEMS NO LATER THAN 5:00 PM TUESDAY, DECEMBER 13, 2016 CI DESIGNATES THAT A PROPER CERTIFICATE OF INSURANCE, ADDING CORPORATE ASSETS INC. AS AN ADDITIONAL INSURED AND A WORKERS COMPENSATION CLEARANCE CERTIFICATE, IS REQUIRED BEFORE ANY ITEM MARKED CI CAN BE MECHANICALLY REMOVED. (SEE CENTER INSERT FOR A SAMPLE CERTIFICATE) FURTHERMORE, PROPERLY AUTHORIZED RIGGER RELEASE INSTRUCTIONS, IN WRITING, ARE REQUIRED BEFORE A RIGGER CAN COMMENCE REMOVAL OF THESE ITEMS NO ITEMS MAY BE REMOVED WHILE AUCTION IS IN PROGRESS NO EXCEPTIONS! THANK YOU 74 Berkeley Street, Toronto, Ontario, M5A 2W7 Tel Fax: NOW ACCEPTING: Visit for specific terms and conditions.

2 1 1 1 LOT/ OUTSIDE MICROMETERS - SIZES 9"-10", 8"-9", 7"-8", 5"-6" 2 1 LOT/ OUTSIDE MICROMETERS - SIZES 9"-10", 4"-5", 3"-4", 2"-3" 3 1 2"- 6" CYLINDER GAUGE 4 1 BLOCK GAUGE SET 5 1 DELTA-ROCKWELL 12" DISC SANDER S/N: DELTA-ROCKWELL 10" DOUBLE END PEDESTAL GRINDER 7 1 EX-CELL-O 6" TOOL GRINDER S/N: N/A 8 1 DECKEL 30/ TOOL CUTTER/ GRINDER 9 1 ROYAL 916 HORIZONTAL BAND SAW WITH 16"X9" CAPACITY, ROLL-OFF CONVEYOR S/N: J DOALL MODEL ML VERTICAL BAND SAW WITH 16" THROAT, 24"X24" TABLE, 10" MAX. WORK HEIGHT, COOLANT, BLADE WELDER/GRINDER S/N: MFG. UNKNOWN SWING ARM CLICKER PRESS S/N: N/A 12 1 ELUND M-26 FLOOR-TYPE DRILL PRESS WITH 26"X26" TABLE, SPEEDS TO 2400 RPM, MACHINE VISE S/N: GREENERD NO.5 5 TON ARBOR PRESS 14 1 MFG. UNKNOWN DOUBLE END PEDESTAL GRINDER S/N: N/A 15 1 MILLER SYNCROWAVE 300 PORTABLE TIG WELDER WITH MILLER RADIATOR-1 COOLING SYSTEM, CABLES AND GUN S/N: JE BRIDGEPORT DUAL HEAD VERTICAL MILL WITH 60"X9" TABLE, SPEEDS TO 4200 RPM, TRUE-TRACE 1110 HYDRAULIC TRACER ATTACHMENT WITH 3 HP HYDRAULIC POWER PACK S/N: J125982/J BRIDGEPORT VERTICAL MILL WITH 60"X9" TABLE, SPEEDS TO 2700 RPM, TRUE-TRACE 1090 HYDRAULIC TRACER ATTACHMENT WITH 5 HP HYDRAULIC POWER PACK S/N: J89374

3 PRINCE-HUNTER BEAVERPAL VERTICAL MILL WITH 45"X10" TABLE, SPEEDS TO 3000 RPM, MITUTOYO 2 AXIS DRO, 6" MACHINE VISE S/N: N/A 19 1 MODERN NO.2 UNIVERSAL MILL WITH 52"11" TABLE, SPEEDS TO 1000 RPM S/N: N/A 20 1 CINCINNATI NO.3 UNIVERSAL MILL WITH 62"X15" TABLE, SPEEDS TO 1300 RPM, COOLANT, 8" MACHINE VISE S/N: 4A3P1K VAN NORMAN IR UNIVERSAL MILL WITH 42"X10" TABLE, SPEEDS TO 2000 RPM, 12" DIA. ROTARY TABLE S/N: N/A 22 1 VAN NORMAN IR UNIVERSAL MILL WITH 42"X10" TABLE, SPEEDS TO 2000 RPM, 6" MACHINE VISE S/N: N/A 23 1 ATLANTIC 4000 SERIES JIG BORER WITH 18"X12" TABLE, SPEEDS TO 2300 RPM, ACU-RITE 2 AXIS DRO, 6" MACHINE VISE S/N: COLCHESTER TRIUMPH 2000 GAP BED ENGINE LATHE WITH 16" SWING, 50" BETWEEN CENTERS, 2" SPINDLE BORE, SPEEDS TO 2000 RPM, INCH/ METRIC THREADING, 10" 3 JAW CHUCK S/N: N/A 25 1 COLCHESTER MASCOT 1600 GAP BED ENGINE LATHE WITH 20" SWING, 80" BETWEEN CENTERS, 3" SPINDLE BORE, SPEEDS TO 1600 RPM, INCH/ METRIC THREADING, 16" 4 JAW CHUCK, STEADY REST S/N: N/A 26 1 EASTCO-SPARCATRON ES2200 SINKER-TYPE EDM WITH FUTABA PULSCALE 3 AXIS DRO S/N: NIAGARA 36-F MANUAL FOOT SHEAR WITH 36"X16 GA. CAPACITY S/N: BOVAR-SCHULTZ CHALLENGER DELUX HYDRAULIC SURFACE GRINDER WITH 10"X5" MAGNETIC CHUCK S/N: N/A 29 1 NORTON HYDRAULIC SURFACE GRINDER WITH 24"X8" MAGNETIC CHUCK, COOLANT S/N: N/A 30 1 BROWN & SHARPE NO.5 MANUAL SURFACE GRINDER WITH 24"X8" MAGNETIC CHUCK, COOLANT S/N: N/A

4 DOALL D-6 MANUAL SURFACE GRINDER WITH 18"X6" MAGNETIC CHUCK, COOLANT S/N: SUNNEN PRECISION HONING MACHINE S/N: N/A 33 1 TOWNSEND TEXTRON DOUBLE HEAD RIVETER S/N: N/A 34 1 LAKE ERIE ENGINEERING 4 POST HYDRAULIC PRESS WITH 20" DIAMETER RAM, APPROX. 750 TON CAP. S/N: N/A 35 1 NIAGARA 7B OBI PRESS WITH EST. 70 TON CAPACITY S/N: N/A 36 1 MFG. UNKNOWN DOUBLE SIDED HYDRAULIC C-FRAME IRON WORKER S/N: N/A 37 1 ABEX-DENISON WUPA-2 TR HYDRAULIC PRESS WITH 2 TON CAPACITY, 2 " DIAMETER PISTON S/N: KITAMURA MYCENTER-3X CNC VERTICAL MACHINING CENTER WITH FANUC SERIES O-M CNC CONTROL, 32"X16" TABLE, TRAVELS: X-29", Y-17", Z-18", 23" MAX. DISTANCE FROM SPINDLE NOSE TO TABLE TOP, SPINDLE SPEEDS 20-12,000 RPM, CAT 40 SPINDLE TAPER, 24 STATION ATC, 10 HP, COOLANT, CHIP CONVEYOR, MYCENTER AUTOMATIC PALLET CHANGER S/N: CLARK EC ELECTRIC INDOOR FORKLIFT WITH 4000 LB. CAPACITY, 182" VERTICAL LIFT, SIDE SHIFT S/N: E STATICON 24V BATTERY CHARGER S/N: RAYMOND 20R40 TT ELECTRIC REACH TRUCK WITH 4000 LB. CAPACITY, 175" VERTICAL LIFT, 1174 HOURS RECORDED ON METER S/N: STATICON 24V BATTERY CHARGER S/N: RAYMOND 40-R60TF ELECTRIC REACH TRUCK WITH 6000 LB. CAPACITY, 128" VERTICAL LIFT, 24V BATTERY S/N: RAYMOND 900-E4RTN ELECTRIC REACH TRUCK WITH 4000 LB. CAPACITY, 144" VERTICAL LIFT, 24V BATTERY S/N: ROLLING A-FRAME GANTRY WITH 1 TON CM LODESTAR HOIST

5 RBS EQUIPMENT SHRINK WRAP PACKAGING MACHINE WITH 350 DEG. MAX. TEMP. HEAT TUNNEL, HYDRAULIC SORTING CHUTE S/N: N/A M-MATIC CASE SEALING SYSTEM TAPE MACHINE S/N: N/A 50 1 ALVA-ALLEN BT TON MECHANICAL OBI PUNCH PRESS S/N: N/A 51 1 HYDRAULIC POWER PACK HP HYDRAULIC POWER PACK 53 1 LOT/ HYDRAULIC POWER PACK AND COMPONENTS 54 1 HYDRAULIC POWER PACK HP HYDRAULIC POWER PACK 56 1 HYDRAULIC POWER PACK 57 1 SPARE REEVES DRIVE 58 1 SPARE REEVES DRIVE 59 1 SPARE REEVES DRIVE 60 1 PRAB 16" CHIP CONVEYOR 61 1 SIGMA SYSTEMS VIBRATORY BOWL FEEDER UNIT 62 1 MFG. UNKNOWN ENCLOSED VIBRATORY BOWL FEEDER 63 1 MFG. UNKNOWN ENCLOSED VIBRATORY BOWL FEEDER 64 1 PERFORMANCE FEEDERS PORTABLE ENCLOSED VIBRATORY BOWL FEEDER 65 1 PERFORMANCE FEEDER ENCLOSED VIBRATORY BOWL FEEDER 66 1 PERFORMANCE FEEDER ENCLOSED VIBRATORY BOWL FEEDER 67 1 INGERSOLL-RAND SSR EP60 ROTARY SCREW AIR COMPRESSOR WITH 60 HP, 27,653 HOURS RECORDED ON METER S/N: D COMPAIR 6000 ROTARY SCREW AIR COMPRESSOR WITH 50 HP, 55,988 HOURS RECORDED ON METER S/N: L OWAMAT 4 OIL/WATER SEPARATOR 70 1 MFG. UNKNOWN BLOWER FAN 71 1 MFG. UNKNOWN BLOWER FAN 72 1 ROLLAWAY PORTABLE DUST COLLECTOR WITH SNORKEL

6 ROLLAWAY PORTABLE DUST COLLECTOR WITH SNORKEL 74 1 AEROVENT PORTABLE SHOP FAN 75 1 AEROVENT PORTABLE SHOP FAN 76 1 AEROVENT PORTABLE SHOP FAN SECTIONS OF PALLET RACK (NO SECTIONS OF PALLET RACK (NO 79 8 SECTIONS OF PALLET RACK (NO 80 5 SECTIONS OF PALLET RACK (NO 81 4 SECTIONS OF PALLET RACK (NO 82 4 SECTIONS OF PALLET RACK (NO SECTIONS OF PALLET RACK (NO 84 9 SECTIONS OF PALLET RACK (NO 85 1 LOT/ REMAINING (6) SECTIONS OF PALLET RACK IN MACHINE SHOP (NO SECTIONS OF PALLET RACK (NO 87 5 SECTIONS OF PALLET RACK (NO 88 3 SECTIONS OF PALLET RACK (NO 89 1 LOT/ PALLET RACK CROSS BEAMS 90 1 LOT/ PALLET RACK CROSS BEAMS 91 5 STEEL PARTS BINS 29" H X 28" W X 35" L 92 5 STEEL PARTS BINS 29" H X 28" W X 35" L 93 5 STEEL PARTS BINS 29" H X 28" W X 35" L 94 5 STEEL PARTS BINS 29" H X 28" W X 35" L 95 5 STEEL PARTS BINS 29" H X 28" W X 35" L 96 5 STEEL PARTS BINS 29" H X 28" W X 35" L 97 5 STEEL PARTS BINS 29" H X 28" W X 35" L 98 5 STEEL PARTS BINS 21" H X 35" W X 45" L

7 STEEL PARTS BINS 21" H X 35" W X 45" L STEEL PARTS BINS 21" H X 35" W X 45" L LOT/ WOODEN PALLETS THROUGHOUT PLANT (APPROX. 700) LOT/ COLLAPSIBLE PLASTIC SKIDS THROUGHOUT PLANT (APPROX. 16) LOT/ CANTILEVER A-FRAME MATERIAL RACK WITH SURPLUS METAL DRAWER TOOL CABINET (NO DOOR HIGHBOY CABINET (NO WOODEN WORK BENCH WITH 5" BENCH VISE (NO STEEL WELDING BENCH WITH 45"X30"X1.5" STEEL TOP (NO DOOR STEEL SHOP CABINET (NO STEEL WORK BENCH WITH 6" RECORD BENCH VISE (NO SINGLE DOOR STEEL SHOP CABINET (NO LOT/ 2 DOOR STEEL SHOP CABINET AND WOOD TOP WORK BENCH (NO STEEL WORK BENCH (NO DOOR STEEL SHOP CABINET (NO TIER 4 DOOR STEEL SHOP CABINET (NO WOOD TOP WORK BENCH (NO LOT/ (2) SINGLE DRAWER WOOD TOP SHOP BENCHES WITH (1) 6" BENCH VISE (NO STEEL WORK BENCH WITH 6" RECORD BENCH VISE (NO STEEL WORK BENCH WITH 6" RECORD BENCH VISE (NO DRAWER WOOD TOP WORK BENCH (NO "X30"1" STEEL PLATE WHEEL OIL CART

8 DENISON HYDRAULIC PRESS HYDRAULIC RIVETING MACHINE WITH BALTEC RNE280 RIVETER H-FRAME SHOP PRESS BUTLER 26" SHAPER WITH 26" MAX. STROKE, 500 RPM, 100 MAX. CYCLES/ MIN. S/N: N/A MFG. UNKNOWN UNCOILER KARDEX KARDVEYER SERIES 80 MECHANIZED ROTARY STORAGE SYSTEM KARDEX KARDVEYER SERIES 80 MECHANIZED ROTARY STORAGE SYSTEM SULLAIR 40 HP ROTARY SCREW AIR COMPRESSOR S/N: SULLAIR 40 HP ROTARY SCREW AIR COMPRESSOR S/N: N/A MFG. UNKNOWN DESICCANT AIR DRYER TBD X-V REEVES MOTODRIVE VARIABLE SPEED MASTER POWER TRANSMISSION LOT/ SKIDS OF SPARE PARTS - MOTORS, PUMPS, VALVES, GEARBOXES LOT/ (4) COMMERCIAL BLOWER FANS LOT/ MOTORIZED ROLLER CONVEYOR SECTIONS STEEL PRESSURE VESSEL /2 HP DUAL BLOWER /3 HP BLOWER MFG. UNKNOWN ENCLOSED SHOP FAN RELIANCE 20 HP DC MOTOR RELIANCE 10 HP DC MOTOR WITH DRIVE SEW 5:1 RATIO GEAR REDUCER HYDRAULIC POWER PACK PORTABLE ADJUSTABLE INCLINE BELT CONVEYOR TOLEDO VORTEX 10,000 LB. X 2 CAP. PLATFORM SCALE WITH TOLEDO 8132 DRO CARDINAL 5000 LB. CAP. PLATFORM SCALE WITH CARDINAL 708 DRO

9 WEIGH-TRONIX BD 2424A PROGRAMABLE WEIGH SYSTEM ADJUSTABLE INCLINE BELT CONVEYOR WEIGH-TRONIX 250 LB. CAP. BENCH SCALE AUTOQUIP SERIES LB. CAP. HYDRAULIC LIFT TABLE LIFTALL 2000 LB. CAP. PORTABLE HYDRAULIC LIFT CART PORTABLE A-FRAME GANTRY LB. CAP. ROLLING SHOP LADDER LOT/ WOOD TOP WORK BENCH AND STEEL WORK BENCH (NO STEEL WORK BENCH WITH 6" WILTON BENCH VISE (NO PACKAGING BENCH (NO LOT/ OFFICE FURNITURE (FURNITURE ONLY) LOT/ OFFICE FURNITURE (FURNITURE ONLY) LOT/ OFFICE FURNITURE (FURNITURE ONLY) LOT/ OFFICE FURNITURE (FURNITURE ONLY) LOT/ TABLES DRAWER LATERAL FILE CABINET DRAWER LATERAL FILE CABINET DRAWER LATERAL FILE CABINET DRAWER LATERAL FILE CABINET ARGO B-5V CNC VERTICAL MILLING MACHINE WITH FANUC OMD CNC CONTROL, TRAVELS: X-40", Y-20", Z-20", CAT 40 SPINDLE, 3D CONTURING, INFINITY PROGRAM EXECUTION S/N: (LOCATED IN WALLENSTEIN, ON) KAWASAKI (2000) FS06N ROBOT WITH C30 CONTROL S/N: 0130 (LOCATED IN WALLENSTEIN, ON) KAWASAKI (2000) FS06N ROBOT WITH C30 CONTROL S/N: N/A (LOCATED IN WALLENSTEIN, ON) AIRLOCX 7" PNEUMATIC MACHINE VISE AIRLOCX 7" PNEUMATIC MACHINE VISE ATS STEP FEEDER WITH 18"X15" APERTURE

10 LOT/ 9 DRAWER TOOL CABINET WITH CONTENTS DRAWER TOOL CABINET LOT/ 12 DRAWER TOOL CABINET WITH CLAMPING HARDWARE DOOR HIGHBOY CABINET SUNNEN MBB-1660 HORIZONTAL HONE WITH 16" MAX. STROKE, 0.06" - 6.5" MANDREL DIAMETER S/N: LOT/ SUNNEN HONING STONES, MANDRELS AND ACCESSORIES HARDINGE HCT-CF TURRET LATHE WITH 13" BETWEEN CENTERS, SPEEDS TO 3000 RPM, 1" SPINDLE BORE, 8 STATION TURRET S/N: VARANAMO FU-3 UNIVERSAL MILL WITH SPEEDS TO 1500 RPM, 60"X13" T-SLOT TABLE S/N: 1702 WITH PNEUMATIC CLAMP FIXTURE CINCINNATI HORIZONTAL MILL WITH SPEEDS TO 1500 RPM, 35"X10" T-SLOT TABLE S/N: N/A WITH PNEUMATIC CLAMP FIXTURE BALTEC DUAL HEAD RIVETER WITH (2) BALTEC RNE281 RIVETERS WITH SPEEDS TO 1660 RPM, (2) BALTEC DIGITAL CONTROL UNITS S/N: N/A VSI SPINNOMATIC TM-10 PNEUMATIC RIVETER WITH SPEEDS TO 1200 RPM, PALM CONTROLS S/N: BLACK & WEBSTER BW-100 ORBITAL RIVETER WITH SPEEDS TO 1700 RPM S/N: MFG. UNKNOWN RIVETER S/N: N/A BRACKER RN301 PORTABLE RIVETER WITH SPEEDS TO 1450 RPM S/N: SPINNOMATIC TM-30 HYDRAULIC RIVETER WITH SPEEDS TO 1725 RPM S/N: SPINNOMATIC TM-30 HYDRAULIC RIVETER WITH SPEEDS TO 1725 RPM S/N: SPINNOMATIC PM-30 FLOOR TYPE RIVETER WITH SPEEDS TO 1800 RPM S/N: 783 MISSING DIRECTIONAL VALVE BRACKER RN280 PNEUMATIC RIVETER WITH SPEEDS TO 1680 RPM S/N: 25400

11 BALTEC RN180 PNEUMATIC RIVETER WITH SPEEDS TO 1620 RPM S/N: BALTEC RNE080 PNEUMATIC RIVETER WITH SPEEDS TO 1700 RPM S/N: BRACKER RN002 RIVETER WITH SPEEDS TO 1720 RPM S/N: ORBITFORM B-250 RIVETER WITH SPEEDS TO 1700 RPM S/N: N/A GRANT MFG. 82B PEDESTAL TYPE MANUAL RIVETER GRANT MFG. 82B PEDESTAL TYPE MANUAL RIVETER DENISON MULTIPRESS 6 TON HYDRAULIC PRESS WITH 10" STROKE, 2" DIAMETER RAM, 2.75" CYLINDER BORE, 6" THROAT, 6 STATION 21" DIAMETER TURNTABLE S/N: A59S DENISON MULTIPRESS 4 TON HYDRAULIC PRESS WITH 6 STATION 21" DIAMETER TURN TABLE S/N: V DENISON MULTIPRESS 6 TON HYDRAULIC PRESS WITH 3 " DIAMETER RAM, 6 STATION 21" DIAMETER TURN TABLE S/N: DENISON 6 TON HYDRAULIC PRESS WITH 3 " DIAMETER RAM, 16"X11" TABLE S/N: 6996-SO DENISON MULTIPRESS WUPA-2 TR 2 TON PNEUMATIC PRESS S/N: DUMORE MULTI-HEAD HYDRAULIC DRILL WITH SPEEDS TO 1140 RPM, 9" THROAT S/N: N/A AMERICAN VIBRATORY FEEDER SYSTEM WITH SOUNDPROOF ENCLOSURE S/N: N/A HOPPMAN EP04/06 CRS INCLINE CONVEYOR WITH HOPPER HOPPMAN EP04/06 CRS INCLINE CONVEYOR WITH HOPPER FMC HOPPER/VIBRATOR WITH 21"X21" APERTURE FMC HOPPER/VIBRATOR WITH 21"X21" APERTURE FMC HOPPER/VIBRATOR WITH 21"X21" APERTURE

12 MCKNIGHT AUTOMATION CUSTOM FEEDING/INSERTING MACHINE WITH 14" DIA. VIBRATORY BOWL FEEDER S/N: N/A " DIA. VIBRATORY BOWL FEEDER VIBROMATIC 18" DIA. X 14" DEEP STAINLESS STEEL VIBRATORY BOWL VIBROMATIC 18" DIA. X 14" DEEP STAINLESS STEEL VIBRATORY BOWL VIBROMATIC 18" DIA. X 14" DEEP STAINLESS STEEL VIBRATORY BOWL VIBROMATIC 12" DIA. X 4" DEEP STAINLESS STEEL VIBRATORY BOWL VIBROMATIC 12" DIA. X 4" DEEP STAINLESS STEEL VIBRATORY BOWL VIBROMATIC 12" DIA. X 4" DEEP STAINLESS STEEL VIBRATORY BOWL HARDINGE CONQUEST CS-GT CNC GANG TOOL LATHE WITH GE FANUC 18T CNC CONTROL, SPEEDS TO 6000 RPM, 5 HP SPINDLE MOTOR, 3 TOOLING STATIONS, HOURS RECORDED ON METER, COOLANT, CHIP CONVEYOR S/N: GT LNS HYDROBAR MINI-SPRINT CNC BAR FEED WITH LNS CNC CONTROL, 150" CAP. S/N: N/A ELMES 300 TON 4 POST HYDRAULIC DIE PRESS WITH 16" DIAMETER RAM, APPROX.14" STROKE, 24"X24" BED, 25"X21" TOP PLATE S/N: CHING CHOW HL TON 4 POST HYDRAULIC DIE PRESS WITH APPROX. 13" STROKE, 34"X28" BED, 21"X15" BETWEEN POSTS S/N: WATSON-STILLMAN 250 TON 4 POST HYDRAULIC DIE PRESS WITH 18" DIAMETER RAM, APPROX. 8" STROKE, 34"X34" BED, 28"X28" BETWEEN POSTS S/N: N/A HYDRAULIC POWER CORP TON 4 POST HYDRAULIC DIE PRESS WITH 16" STROKE, 30" DAYLIGHT, 14" SHUT HEIGHT, 30"X24" BED S/N: MFG. UNKNOWN 200 TON H-FRAME HYDRAULIC DIE PRESS WITH 12" DIAMETER RAM, APPROX. 12" STROKE, 20"X13" BED S/N: N/A MFG. UNKNOWN 2 POST HYDRAULIC PRESS S/N: N/A

13 WATERBURY FARREL NO. 20 THREAD ROLLER WITH 3/8" MAX. THREAD DIAMETER, 3" MAX. THREAD LENGTH, 4" MAX. SHANK LENGTH, VIBRATORY BOWL FEEDER S/N: N/A HYTROL MODEL-TR INCLINE BELT CONVEYOR WITHHOPPER/FEEDER S/N: N/A CAMPBELL 3W BUCKET ELEVATOR, APPROX. 130" H WITH 11" W BELT WAGNER 500 TON STRAIGHT SIDE PRESS WITH 24 "" MAX. SHUT HEIGHT, 67"X35" BED, 54"X31" TOP PLATE, PALM CONTROL, GEMCO AUTOMATION CONTROL UNIT, $200,000 COMPLETE REBUILD 2006, NEW CLUTCH, SOFT START, CSA Z COMPLIANT S/N: N/A COLT CSMC COIL CRADLE WITH 12" MAX. WIDTH PNEUMATIC FEEDER, 5 HP MOTOR, PENDANT CONTROL S/N: SMERAL LE-400C 400 TON GAP FRAME PRESS, WITH 5 "" MAX. STROKE, 14" SHUT HEIGHT, 40 MAX. STROKES PER MINUTE, 49"X34" BED, 37"X22" TOP PLATE S/N: LITTELL 408-C20 COIL CRADLE WITH 0.125"X8" CAP. AND MECHANICAL FEEDER S/N: MFG. UNKNOWN PNEUMATIC FEEDER LITTELL 416-C20 COIL CRADLE WITH 0.125"X12" CAP. AND MECHANICAL FEEDER S/N: MFG. UNKNOWN PNEUMATIC FEEDER DURANT COIL CRADLE WITH 10" MAX. WIDTH MECHANICAL FEEDER S/N: N/A DURANT MD-6 STR 6" STRAIGHTENER S/N: N/A LOT/ WIRE FEEDER, STRAIGHTENER AND CUTTER LOT/ WIRE FEEDER, STRAIGHTENER AND WIRE VISE WIRE FEEDER WITH STRAIGHTENER CIRCULAR SAW ATTACHMENT "X24" ROLLER CONVEYOR HP HYDRAULIC POWER PACK

14 PABCO 7.5 HP HYDRAULIC POWER PACK HP HYDRAULIC POWER PACK AEC PSW HP PORTABLE CHILLER WITH RANGE OF DEGREES S/N: 30F "X37" NORMAN WADE DRAFTING TABLE LOT/ TURNTABLES HIGH VISCOCITY PUMPS

15 NOTES: