Excellent for bending, bonding or straightening. Press bed of 50 Ton press moved by winch. Double speed pumps for fast ram moving without load.

Transcription

1 Excellent for bending, bonding or straightening Press bed of 50 Ton press moved by winch. Double speed pumps for fast ram moving without load. Gauge indicates metric Tons. Grid guard Handwinch 74

2 Excelent for bending, bonding or straightening M H W 1 L W 2 W Tons 133 kn 20 Tons 178 kn 30 Tons 267 kn 50 Tons 445 kn Stroke M L W W W2 H Shop Presses / Tools 75

3 With easy system for the hoisting of the working table The contra weight allows an effortless and fast positioning of the Designed and developed for relieving the operator from physical stress during hoisting of the working table. Supplied with double speed pump and a long hydraulic stroke Pump to be operated by foot or manually. D E W L SMS Tons SMS Tons Punch Plate rbor Plates Moveable ylinder Open Safety Guard SG51 losed Safety Guard SG51 Punch Set SP31/SP51 Safety Practices Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products. dapter 15 mm 20 mm 25 mm 30 mm 35 mm 76

4 Electrical Press with Remote ontrol New series of electrical presses with double acting cylinder. ll presses are supplied with 2 V rbor Plates and a punch plate. moveable Ram and winch to hoist the working table is included with the presses. means of the remote control. 1 D E max. H F SDE10013 G ylinder Pump 1 D E F G SED5513 HD5513 PE SED10013 HD10013 PE Operating by: Two - hands Safe two hands operation. Flashing warning light - when operating. ylinder Pump 1 D E F G SE5513 HD5513 PE SE10013 HD10013 PE Shop Presses / Tools SE10013 Punch Plate Winch rbor Plates 77

5 12-50 Ton With easy adjustable extension screw [2-20 Tons]. With rubber removable carry ring for easy storage of pump handle [2-20 Tons]. Safety valve against over-loading. ottle Jacks 8 Ton and more are supplied with a carry grip. D W F L E Tons 107 kn 20 Tons 178 kn 30 Tons 267 kn 50 Tons 445 kn 100 Tons 890 kn D E F L W ompact ompact and lightweight onvenient for storage 5 Tons 44 kn 5 Tons 44 kn 10 Tons 89 kn 20 Tons 178 kn Minimum Height Height J11050 palm of your hand. Hydraulic Lifting ase Size J x J x J x J x J11050 J11100 Interchangeable saddle on model J11050 and J

6 Ton ir operation reduces operator fatigue and increases speed Hydraulic system is protected from internal damage by a patented hose from the air motor, allowing compact storage or remote operation ØF L W Tons 178kN 20 Tons 178 kn 30 Tons 267 kn D E F L W Low Height Heat treated and chrome plated medium-carbon steel cylinder. hrome plated plunger improves longer seal life and optimum performance. U.S.Patented by-pass device protects hydraulic system from over travel damage. Hydraulic system is protected from internal damage by a patented ottle Jacks Toe Saddle Head Saddle Hydraulic Min. Height Min. Height Lifting ase Size 3 Ton / 27 kn J x Ton / 53 kn J x Ton / 89 kn J x Ton / 133 kn J x

7 Manual Pullers djustable in width. MP Ton MP Ton MP Ton MP Ton MP Ton MP Ton MP Ton MP Ton Manual Pullers an be used with either 2 or 3 jaws. The extra long jaws are adjustable in 4 positions. The jaws have a special cut-out to pull. (Ton) MP MP The jaws have a special cut-out to pull MP MP Manual Pullers (Ton) MP MP MP

8 Manual Pullers Min. MP MP MP R Manual Pullers Min. R PS PS PS Manual Pullers MP MP MP Position to Pull Position to Split Pullers Note: e sure to use the correct position for the required action in order to avoid damaging the Splitter-Set. 81

9 Hydraulic Pullers (Excluding ylinder) Pullers for Single cting ylinders. W ylinder (Optional) (Ton) Min. W W P1205 H PL1205 H ylinder (Optional) (Ton) Min. P2205 H P2205 Min. L R e PS PS R R P PS1204 e L PS mm Ø 38mm ylinder (Optional) (Ton) P1305 H Ø 24 mm P

10 (Excluding ylinder) Puller Kit (Ton) 2/3 Leg Puller 2 Leg Puller Splitter PK P1305 PL1205 PE1108+PE1118 PS ontent: 2/3 Leg Puller 2 Leg Puller Extensions for 2 Leg Puller Splitter P1305 PS1204 Position to Pull PE1118 Position to Split PE1108 PL1205 Note: e sure to use the correct position for the required action in order to avoid damaging the Splitter-Set. PH0503 ontent: Handpump P350 ylinder H0503 Gauge and Gaulle daptor Hose Fitting and oupler Pullers Hydraulic Set (Ton) Handpump Fitting Gauge + daptor Hose oupler ylinder PH P GW F3814 S H38-M H

11 (Excluding ylinder) ylinder (Optional) (Ton) Legs P2310 H / P2320 H2002T P2330 H3002T P2360 H6003T PL2310 H / PL2320 H2002T PL2330 H3002T PL2360 H6003T ylinder (Optional) (Ton) Legs P2310 H / P2320 H2002T P2330 H3002T P2360 H6003T P2399 H10003T PL2310 H / PL2320 H2002T PL2330 H3002T PL2360 H6003T Splitter pplication Internal Puller 84

12 Puller Kit Incl. 3-Leg Puller Incl. Self-entering 3-Leg Puller (ton) PK1010 PK1110 PK PK1020 PK1120 PK PK1030 PK1130 PK PK1060 PK1160 PK PK PK ontent: 2 Leg Puller Extension Legs Splitter Internal Puller (Excluding ylinder) Joining Nuts Point Protection 2/3 Leg Puller Joing Nuts Point Protection 2 Leg Pull Device Extension Legs Splitter Internal Puller ontent: Handpump Hollow ylinder Gauge and Gaulle daptor Hose Fitting and oupler Hydraulic Set (Ton) Handpump Fitting Gauge + daptor Hose oupler ylinder Saddle Pullers PH P350 Incl. GW F3814 S H PH P350 Incl. GW F3814 S H38-M H2002T PS20 15 PH P350 Incl. GW F3814 S H38-M H3002T PS30 18 PH P GW F3814 S H38-M H6003T PS60 46 PH P GW F3814 S H38-M H10003T PS

13 (Ton) 3 or2/3 Leg Puller Self-entering 3 or 2/3 Leg Puller 2 Leg Puller PK P2210 PK P2220 PK P2230 PK P2250 PK P2250 PK P2210 PK P2220 PK P2230 PK P2250 PK P2250 PK P2210 PK P2220 PK P2230 PK P2250 PK P2250 Set PE PE1146 PE PE1252 PE PE1358 PE PE1582 PE PE1582 PE PE1146 PE PE PE1358 PE PE1582 PE PE1582 PE PE1146 PE PE PE1358 PE PE1582 PE PE1582 Splitter Internal Puller Joining Nuts Point Protection PS1204 PI1210 JN05 PP10 35 PS1206 PI1220 JN10 PP20 60 PS1210 PI1230 JN30 PP PS1210D PI1250 JN50 PP PS1212 PI1250 JN50 PP PS1204 PI1210 JN05 PP10 44 PS1206 PI1220 JN10 PP20 83 PS1210 PI1230 JN30 PP PS1210D PI1250 JN50 PP PS1212 PI1250 JN50 PP PS1204 PI1210 JN05 PP10 50 PS1206 PI1220 JN10 PP20 93 PS1210 PI1230 JN30 PP PS1210D PI1250 JN50 PP PS1212 PI1250 JN50 PP

14 (Ton) Min. P P P P (Ton) Min. P P P P (Ton) Min. P P P P R1 1 2 Min. R1 R2 R2 PI /4 UNF 16h 5/8 14h PI UNF 8h 5/8 14h PI /4 UNF 7 h 1 14h 6.0 PI /8 UNS 5.5h 1 14h 6.4 R R Min. L R e PS PS PS Pullers e PS1210D PS L M Ø D R1 R2 R1 PE /8-18h 1/2-20h PE /8-18h 3/4-16h ØD M L PE h 1-14h PE /4-12h 1 1/4-12h PE /8-18h 1/2-20h PE /8-18h 3/4-16h R2 PE h 1-14h PE /4-12h 1 1/4-12h 87

15 POSILOK (Excluding ylinder) Safety cage design prevents jaws from slipping ylinders are removable for easy servicing Each puller includes a lift plate and a ram point set HGP503 HGP253 HGP153 HGP103 HGP053 ylinder Ram Stroke Reach Spread Range Jaw Style 5 Tons 44 kn HGP053 H External 10 Tons 89 kn HGP103 H External 15 Tons 133 kn HGP153 H External 25 Tons 222 kn 25 Tons 222 kn HGP253 H External HGP253IE H External/Internal 50 Tons 445 kn HGP503 H External 5 Ton Holding Force (Excluding Pump & ccessories) Hands free operation with foot pump control ir control valve for variable speed and added safety ast steel construction 52,000 PSI tensile strength Hydraulic pressure closes jaws, spring return opens jaws Safety Instructions section to review the best methods of operation. pg lways be prepared. 102 HV5 5 Tons 44 kn Jaw Width Jaw learance Jaw Opening

16 30 Ton & 60 Ton (Excluding ylinder) Ideal for pushing King Pin and Stub xle Pin replacement. Ø D E F L P P Hydraulic Set is not included We recommend the following set: Pullers / Press (Ton) Handpump Gauge + daptor Hose oupler ylinder Saddle 30 P1500 GW F H38-M H3002T PS P1500 GW F H38-M H6003T PS

17 20 Ton (Excluding ylinder) Ton PPE Pad Eyes are used to tie down loads on marine vessels, trucks, doc sides, oil rigs and many more applications. s Pad Eyes might be exposed to extreme loads and therefore need to be tested to make sure they are up to standard for the particular job. Our Pad Eye Testers are designed to test many types of pad eyes. 210 mm PPE20 30 Ton & 60 Ton Excluding Hydraulics Ton Ø PPE PPE PPE30 PPE30 90

18 Pin Type (Including ylinder) Kit: SP HFS05 HFS10 Stroke Oil Maximum Flange 5 Ton / 44 kn HFS X Ton / 89 kn HFS X 91 Designed for heavy duty industrial environment djustable jaw width for a wide range of applications and easy use Spare wedge attachment is included Ideal for wedging, prying and opening High strength forged steel Spring return for easy operation D E PITY 12 TON 3/8"- 18NPTF D E 3/8"- 18NPTF E Spreaders ylinder ylinder Effective rea (cm²) Oil (cc) Dimensions D E 0.5 Ton 4.9 kn SR Ton 9.8 kn SR Ton 98 kn SR100T N/ N/ / /

19 ompact and Heavy Duty Spacers include a straight chisel with a 60/40 angle, and works on all type of materials, including stainless steel hisel can be re-sharpened multiple times blade Our Recommendation This combination kit will work well with this foot pump P570FP pg46 (Tons) olt Range Nut Range Oil (cc) Dimensions D E F G H K Replacement lade NS M6-M NS NS M12-M NS NS M16-M NS NS M22-M NS NS M27-M NS NS M33-M NS NS M39-M NS V ag Very practical for service people. For easy and comfortable carry/transport of the equipment to the place of work while keeping your hands free. 92

20 4, 10 Ton Sets are portable for ease of use on the job site 10 ton set has wheels for easy transport Designed for pushing, spreading, pressing and more Tons 36 kn 10 Tons 89 kn Pump (R) ollapsed Height (cm) Plunger Effective rea (cm²) of ttachments * When extension tubes and/or offset attachments are used, the capacity is reduced. Maintenance Kits Ton omplete with 8 former attachments for a wide variety of pipe diameters. apable of bending high pressure/temperature tubing as well as standard hydraulic, gas, steel, aluminum and brass from 12.7mm up to 76.2mm, with included attachments. Ram range: 251mm Max. working pressure: 700 R : 82.8 Kg. 12,7mm 19,1mm 25,4mm 31,8mm 38,1mm 50,8mm 64mm 76,2mm 93

21 To transport containers safely Easy to operate and simple to move around or to store. containers. complete container lifting set contains: - art to move corner blocks. - 4 corner blocks with 25 Ton hydraulic cylinder. - Pump to operate the system. The set can be composed to your needs/requirements with air hydraulic, electric or gasoline/diesel pump. Support Plate L LS25 LS

22 inside or outside. uneven surfaces. Fits all ISO-containers. Transport trolleys: - MS 151/MS 201/MS 301 tandem trolley with turntable for steering. - MS 152/MS 202/ MS 302 ontainer Systems MS151/ MS201/ MS301 MS152/ MS202/ MS302 (ton) Wheels Ø of Wheels MS Ø 85 x 85 MS MS Ø 140 x 59 MS MS Ø 140 x 59 MS H1 H2 one Welded Twist Lock Twist Lock Use Indoor/Outdoor on Indoor/Outdoor on pavement Indoor/Outdoor on pavement 95

23 For mounting of O-Ring and Lock-Ring x extension pieces for use up to 52 are included. omplete set includes 2 x 5Ton column with an airhydraulic foot pump. Including accessories. With a safety chain. Including 2 hydraulic cylinders H0509. HM0509 To store the mounting clamp and all accessories. HM-rate With air hydraulic foot pump P1500. High pressure hoses S3814. HM

24 For Lifting Earth Moving Machine, Reach Stacker and Straddle arrier M25 M25 Mobile base plate. Lifts 25 Ton in single and 50 Ton in parallel use. Includes double handle, elevation discs and saddle. M50 M50 Mobile aluminum base plate. Lifts 50 Ton in single and 100 Ton in parallel use. Includes double handle and saddle. M100 M100 Mobile base plate. Lifts 100 Ton in single and 200 Ton in parallel use. Includes double handle and aluminum elevation discs. Stabilisation D E M M M Related Product: Stability Solutions We offer Stabilisation locks and Support Pads 98 pg Safety Practices Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products. 97

25 Stability solutions The stabilisation blocks are designed to provide superior crib stability compared to standard products. Unlike wooden products, the stabilisation blocks do not splinter or Lightweight and easy to handle, with anti-slip layers. Instead of snapping, cracking or collapsing it gradually deforms providing a visual warning of overload. Stabilisatioon locks olor Dimension D (Ton) Stackability Layer Height S 001 lack S 001Y Yellow S 002 lack S 002Y Yellow Interlocked ribbing Options Height of the stability tower is limited to 2 Stage 3 Stage Wedge for S 001 or S 002 SW 001 lack SW 002 lack In this photo, we see S 002 blocks set up for a 2 stage crib application. Stabilisation blocks are designed according to a system of interlocking blocks. In this photo, we see S 002 blocks set up for a 3 stage crib application. Safety First Loads must be evenly spread over the cribbing blocks. Pointloading to be avoided. Safety Practices Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Safety First When you are cribbing, do not mix different blocks. The blocks need to be identical. Wedges should be aimilar width as crib block. 98

26 Stability solutions The support pads are outrigger pads used for mobile cranes, truck mounted cranes, aerial working platforms, concrete pumps, containers, hydraulic jacks etc. Its purpose is to spread the weight over a larger surface offering better support while also protecting the surface. Support Pads Grip Dimension (Tons) SP x 400 x SP x 500 x SP x 600 x SP x 600 x SP x 1000 x Other sizes/capacities available on request. Stability solutions Ecological Light weight Easy to handle High durability Water-repellent Nearly unbreakable No rusting No Rotting Stabalisation Safety Practices Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products. 99

27 ompatibility heck Ton V Team Ton V Team Single cting ylinders H5502 R HSS502 H0500 R-50 - HFS51 H0501 R HSS51 55 H5504 R HSS504 H5506 R HSS506 5 H0503 R HSS53 H0505 R HSS55 H0507 R HSS57 H0509 R HSS H5513 R HSS5013 H7506 R HSS756 H7513 R H10006 R HSS1006 H10010 R HSS10010 H1001 R HSS101 Threaded ylinders H1002 R HSS102 H1004 R HSS HT T - HT T - 10 H1006 R HSS106 H1008 R HSS108 luminum ylinders HU2002T R-202 R202 - H1010 R HSS1010 H1012 R HSS1012 H1014 R H1501 R H1502 R HSS HU2004T R-204 R204 - HU2006T R-206 R206 - HU3002 R-302 R302 - HU3004 R-304 R304 - HU3006 R-306 R306 HS306 HU5002 R-502 R H1504 R HSS154 H1506 R HSS156 H1508 R HU5004 R-504 R554 - HU5006 R-506 R556 HS506 HU5010 R-5010 R H1510 R HSS1510 H1512 R H1514 R H2501 R H2502 R HSS252 H2504 R HSS254 H2506 R HSS256 H2508 R HSS258 H2510 R HSS2510 HU HU HU10002 R-1002 R HU10006 R-1006 R1006 HS1006 HU10010 R HL1001 RS-101 RSS101 HLS HL2002 RS-201 RSS202 HLS HL3002 RS-302 RSS302 HLS HL5002 RS-502 RSS502 HLS502 H2512 R H2514 R HSS H3008 R HSS308 V is a registered trademark of SF ompanies. Enerpac is a registered trademark of the ctuant orporation. Power Team is a registered trademark of SPX orporation. Simplex is registered of the ctuant orporation. 100 HL10002 RS-1002 RSS1002 HLS1002 Flat ody ylinders HF0503 RSM-50 RLS50 HPS50 5 HF0503 kit HF1005 RSM-100 RLS100 HPS HF1005 kit

28 ompatibility heck Ton V Team Ton V Team 20 HF2005 RSM-200 RLS200 HPS200 HF2005 kit HD1010 RR-1010 RD HD1012 RR HF3005 RSM-300 RLS300 HPS300 HF3005 kit HD3008 RR HD3014 RR-3014 RD HF5006 RSM-500 RLS500S HPS HF7506 RSM-750 RLS750S HPS HF10006 RSM-1000 RLS1000S HPS HF15006 RSM-1500 RLS1500S HPS1500 Pull ylinders 2 HP0205 R-25 RP25-5 HP0505 R-46 RP55-10 HP1006 R HD5506 RR-506 RD556 HD5506 HD5513 RR-5013 RD5513 HD5513 HD5520 RR-5020 RD HD7506 RR HD7513 RR HD10006 RR-1006 RD1006 HD1006 HD10013 RR RD10013 HD10013 Hollow Hole ylinders H1201T RH-120 RH120 HHS101 H1202T RH-121 RH121 HHS H1202XT RH-1211 RH121T - H1203XT RH-123 RH123 - H2002T RH-202 RH202 HHS H2006T RH-206 RH206 HHS206 H3002T RH-302 RH302 HHS H3006T RH-306 RH306 HHS306 H6003T RH-603 RH603 HHS H6006T RH-606 RH606 HHS H10003T RH-1003 RH1003 HHS1003 Lock Nut ylinders HLN5502 LL-502 R552L HFG502 HLN5504 LL HLN5506 LL-506 R556L HFG HLN5508 LL HLN5510 LL-5010 R5510L HFG506 HLN5512 LL HLN10002 LL-1002 R1002L - HLN10004 LL HFG1004 HLN10006 LL-1006 R1006L HFG HLN10008 LL HLN10010 LL R10010L - HLN10012 LL V Hand Pumps Team P601S P-39 P12 HP110 P1201S P-391 P55 - P350 P HP211 P1000 P-392 P59 HP212 P1201 P-77/P P2301 P-80 P159 HP227 P4301 P-801 P157 HP257 P8701 P-462 P460 HP245 P2301M P-84 P157D - P8701M P-464 P460D HP245D P240L P ir Pumps P600 P-133 P9 - P600H - P9H - P P6 - P1500L PRG-1102N P6R - P1500M - P6DM - P2000 PTG-1102N - HP1120 P3801 PTG-1105N P6-1 HP1121 P3801L - - HP1141 PR P174 - PR4003 P462 - PRD P172 - PRD P174 - ross-referencing / Engineering *For comparison purposes only. Products are not identical. To view complete cross over list go to 101

29 Industry Safety Standards Do not override the factory setting of relief valves. lways use a gauge to check system pressure. Read and understand all printed materials provided with and on this cylinder Do not exceed rated capacities Use only on hard level surface capable of sustaining the load Do not connect actuators to pumps with higher pressure ratings lways inspect hoses and connections for damage prior to use Keep hands and feet clear of work area LIFTING DEVIE ONLY! Immediately after lifting, support the load with appropriate means No alterations shall be made to this cylinder Failure to meet these markings may result in injury and/or property damage bleeds off the smaller effective area of the cylinder Provide a solid support for the entire cylinder base area. Use cylinder base attachment for more stability. The entire cylinder saddle must be in contact with the load. Movement of the cylinder must be parallel with the movement of the load. Do not use cylinder without saddle. This will cause plunger to mushroom Saddles distribute load evenly on the plunger. s with jacks, never place any part of your body under the load. Load must be on cribbing before venturing under. lways protect cylinder threads for use with attachments. Keep hydraulic equipment away from open Provide a level and solid support for the entire jack base area. The entire jack saddle must be in contact with load. Movement of the load must be in the same direction as jack plunger. Never place any part of your body under the load. Ensure the load is solidly supported before venturing under. Remove the jack handle when not in use. Use only on hard, level surfaces capable of sustaining the load. Immediately after lifting, support the load with appropriate means Failure to meet these warnings may result in personal injury as well as property damage. 102

30 Do not exceed the rated capacity of this device. Monitor pressure and load at all times. Verify load with calibrated load cell and indicator, accurate pressure gauge or equivalent devices. Release the hydraulic pressure before disconnecting hoses or couplers, and before servicing the pump or accessory. Immediately after lifting, support the load with appropriate means. Never rely on hydraulic pressure to support a load. Ensure that the chosen application is stable to work on and around. Do not subject the pump and its components to shock loads. Do not connect to applications which can return more oil to the reservoir than the pump reservoir can hold. No alterations shall be made to this device. Failure to meet these warnings may result in personal injury as well as property damage. TO VOID ELETROUTION HZRD: Do not use handle extender. Hand pumps should be easy to operate when used correctly. Fill pump only to recommended level. Fill only when connected cylinder is fully retracted. lean both coupler parts before connecting. Use dust caps when coupler parts are not connected. damage the valve. can destroy your seals and pump and will render your warranty null and void. Detach cylinder only when fully retracted or use shut-off valves or safety valves to lock-in cylinder pressure. Owner/Operator must read, understand and follow all printed material provided with this device before use. onnect ONLY to properly grounded electrical source. onnect to GFI outlet ONLY! For use in dry locations. void the use of extension cords. If used, extension cord lengths up to 7 meter shall be SJT-14X3 or heavier. For cords up to 15 meter, use SJT-12X3 or heavier. For extension cord lengths up to 30 meter, use SJT-10X3 or heavier. NEVER use a 3 prong adapter. Do not operate this device in an explosive atmosphere or in the presence of conductive liquids. ross-referencing / Engineering Keep hoses away from the area beneath loads. Do not kink hoses. ending radius should be at least 4½". Do not drive over or drop heavy objects on the hoses. 103

31 Ensure a longer life span of your equipment Hydraulic Fluids ir Line Lubricants Hydraulic and Pneumatic Filtration Proper Operation of Equipment ty, set up, operation, maintenance, trouble shooting, storage and warnings for all V products. : Key to Measurements Length ylinder Plunger Speed 60 Q ylinder Effective rea (cm 2 ) ylinder Plunger Speed (sec/cm 2 ) = 3 /min) 60 (sec) 1 (min) = kg 1 in =25.4 mm 1 kg =2.205 lbs 1 mm =0.039 in Force Force (kg ) = Hydraulic Working Pressure (kg/cm 2 ) ylinder Effective rea (cm 2 ) =2,000 lbs 1 in² =6.452 cm² =2,205 lbs 1 cm² =0.155 in² ylinder Oil L Oil (cm 3 ) = ylinder Effective rea (cm 2 ) ylinder Stroke (cm) Volume: Pressure: 1 in³ = cm³ =0.69 bar 1 cm³ =0.061 in³ 1 bar =14.5 psi ¼ Hose Oil Internal Diameter (mm 2 ) 4 Oil (cm 3 ) = 33 Length of Hose (m) Length of Hose (m) =61.02 in³ 1 kpa =0.145 psi 1 liter Internal Diameter (mm 2 ) 4 Oil (cm 3 ) = 72 Length of Hose (m) Length of Hose (m) =3.785 liter Temperature: ylinder Effective rea =231 in³ 0 F D2 4 ylinder Effective rea = (ylinder ore Diameter) 2 4 =3,785 cm³ 0 =

32 ylinders H 6 HL 16 HLN 22 HP 26 HDG 32 ccessoires 40 HG 10 HF 18 HLNF 24 HPD 27 HDU 36 HU 14 H 20 HT 25 HD 28 HD 38 Pages 6-41 Pumps P P Single cting Hand Pumps Double cting Hand Pumps 44 P 44 P P57 Foot Pumps 46 P ll Position ir Pumps Single cting ir Pumps Double cting ir Pumps 47 PR 48 PU Rotary ir Pumps Universal Motor Pumps 48 PE 1-Phase Electric Pumps 50 PE 3-Phase Electric Pumps 51 PG 52 PD Gas Engine Pumps Diesel Engine Pumps Pages ombo Kits H General Purpose ylinder ombinations 60 HL 61 HF Flat ody ylinder ombinations 60 HLN Lock Nut ylinder ombinations 61 H Hollow Hole ylinder ombinations 61 HU luminum ylinder ombinations 61 Pages ontrol Valves & ccessories Flow ontrol Valves 62 Gauge dapters 65 Pressure Switch 66 Hydraulic ouplers 67 Manifold locks 68 Fittings 71 Manifolds 64 Hydraulic Oil 66 Foot Pedals 66 Hydraulic Hoses 67 Directional ontrol Valves 69 Pressure Gauges 65 External Pressure dj 66 oupler Dust over 66 Solenoid Valves 68 Pump Mounted Valves 70 Pages Heavy Duty Presses 74 Hydraulic Manual Press ir/manual ottle Jacks 79 olt Puller/ King Pin Press 89 V ag Toe Jacks 79 Pad Eye Tester 90 Maintenance 93 Presses/ottle Jacks/Pullers Electrical Press 77 Pullers 80 Flange Spreaders 91 Pipe ender 93 Manual ottle Jacks 78 Hydraulic Gear Pullers 88 Spreaders 91 Mini Jacks 78 Hydraulic ench Vise 88 Hydraulic Nut Splitter w/ ase 92 Tools/ Equipment Pages ontainer Lifting System 94 Hydraulic Mounting lamp 96 Support Pads 99 ontainer Moving System 95 Movable ase Plates 97 Ring Mounting lamp-hydraulic 96 Stabilisation locks 98 Pages ross-reference & Engineering V ross Reference hart 100 Hydraulic Formula Reference 104 Safety Instructions 102 V in action 106 Maintaining Your Equipment 104 bout V 107 opyright 2016 SFEU ompanies ll rights reserved. ny copying or other use of the material in this catalog (text, illustrations, drawings, photos) without prior express written consent is prohibited. Information in this catalog is subject to change without prior notice. 105

33 106

34 Shinn Fu orporation was originally founded as Shinn Fu uto Supply ompany Ltd. by Mr. Michael Hung in 1971 based in Taipei, Taiwan. Shinn Fu has grown into the global leader of hydraulic lifting equipment in the automotive aftermarket. The insistence of producing and offering only the highest quality products has earned Shinn Fu a reputation for exceptional quality in the market. Started in 1972, Shinn Fu orporation started manufacturing hydraulic products for the professional and consumer markets. In 2004 the company began manufacturing for the industrial market with V Hydraulics. In 2009, due to substantial growth in the industrial market, the company expanded its facilities in Kansas ity, MO to better service the North merican market. 1996, began with the casting production in July 1997, and added with the N machining processing com. In order to provide the customers with excellent after-sales service, Shinn Fu has established worldwide brands: V Hydraulics, Omega Lift Equipment, Omega Mechanix and Pro-Lift for latest V information Visit the V website: Learn more about V New products Electronic atalogues ustom Solutions Trade shows Nearest Distributors & Service enters While every care has been taken in the preparation of this catalogue and all data contained within is deemed accurate at the time of printing, any product, or discontinue any product, contained within this catalogue without prior notice. are critical. ll information in this catalogue can be changed due to product improvements without prior notice. opyright 2016, Shinn Fu. ll rights reserved. ny copying or Shinn Fu catalogue of Omega Lift Equipment, Pro-Lift to meet your needs: To obtain your copy just give us a call, or visit our Internet site. 107