BREEDVELD & WEAVER HYDRAULICS APPLICATION

Size: px

Start display at page:

Download "BREEDVELD & WEAVER HYDRAULICS APPLICATION"

Stanley Chambers
6 years ago
Views:

1 GENERAL SALES REPAIR TECHNISCHE HANDELSONDERNEMING BREEDVELD & WEAVER HYDRAULICS

3 GENERAL SALES REPAIR TECHNISCHE HANDELSONDERNEMING BREEDVELD & WEAVER HYDRAULICS

4 GENERAL BREEDVELD & WEAVER HISTORY On 25 April 1955 the company was founded and seated in the heart of Rotterdam at the Bolwerk. At this time the only activities were repair and sales of hydraulic jacks, rolling and small tools for the automotive industry. In 1958 the company moved to a larger building of approximately 200m 2 in the Fabrieksdwarsstraat in Rotterdam with a small workshop for all kinds of hydraulics. Since 1960 the sale of hydraulic products had grown enormously and from that time on several wellknown hydraulic brands were sold and repaired. In de following years the company continued to grow and in 1970 it moved to Vlaardingen, a city at about 10 minutes from Rotterdam in the middle of of the Europoort. A building of 850m 2 was bought, with a workshop of 200m 2 equipped with lathes, drilling, sawing, welding and testing machines. In this workshop six technicians were active with the repairing, special new building and assembling of hydraulics. In 1990 the company moved to its present location of 2200m 2, featuring a sales department, an entire new workshop for special new building, assembly and repair of cylinders, pumps, power units, low and high pressure hydraulics, a service-workshop and a new warehouse for parts and seals in order to be able to work with more efficiency and to offer our clients more support and service. At this moment we have eight people at work at the sales and administration department and the repair/special new building/assembly department consists of twelve technicians. Today BREEDVELD & WEAVER is active in all sectors of industry, from the smallest workshop to the largest factory. On construction sites and offshore platforms, in research and test laboratories, power-stations and on chemical plants, in the automotive industry, astronautics and the national railroad the Nederlandse Spoorwegen and in the material handling industries. Wherever there is a need for hydraulic power the hydraulic products of BREEDVELD & WEAVER prove to be an effective solution! With a wide range of known and reputable brands like, GALTECH, HYDRASHEAR, LARZEP, MEGA, RIKEN, SIMSON, BOSCH and VICKERS we offer high quality products at a good price.

5 GENERAL MISSION The mission of BREEDVELD & WEAVER is to supply, service and develop professional and quality hydraulic components and/or systems which provide us and our clients a clear surplus. GOALS BREEDVELD & WEAVER is a company that supplies products to industry, construction, infrastructure, engineering and service industry. BREEDVELD & WEAVER pursues a innovative way of working and aims to offer leading, integral and durable solutions for a wide range of applications, in cooperation with its partners. BREEDVELD & WEAVER will continue to apply and expand its know-how and expertise in order to be able to participate in projects from the design stage to the actual construction. This demands a careful and constant strive for a solid financial base. BREEDVELD & WEAVER strives to offer its employees an optimal and stable work environment. An environment in which creativity and innovative ideas are stimulated. BREEDVELD & WEAVER considers social involvement to be a matter of course. Innovation, a clear, open and honest style of doing business, having regard to law and regulations, a transparent organisation structure, care for the environment, customer care and sustainable business are core values of the day-to-day thinking and acting.

Corporate information 21-11-2013 Company name : Technical trading company BREEDVELD & WEAVER B.V. GENERAL Address : George Stephensonweg 33 ZIP code/city : 3133 KJ Vlaardingen Postal address : P.O.

6 Corporate information Company name : Technical trading company BREEDVELD & WEAVER B.V. GENERAL Address : George Stephensonweg 33 ZIP code/city : 3133 KJ Vlaardingen Postal address : P.O. box AD Vlaardingen Telephone : (+31) (0) Telefax, general : (+31) (0) Telefax, administration : info@breedveld-weaver.nl info@brewe.nl Website : Incorporated : Legal form : Limited liability company since CoC register no. : in Rotterdam V.A.T. no. : NL B01 Bank relation : ABN-AMRO - office Coolsingel in Rotterdam IBAN no. : NL63ABNA Bank account no. : BIC (swift) code : ABNA NL2A UWV GAK no. : Management : Mr A.F. Breedveld Mr A.C. van Iwaarden Company description : Technical trading company in hydraulic according to the equipment, jacks and lifting tools, import, registration of the export and wholesale of garage equipment, Chamber of Commerce equipment, tools and machines, repair of hydraulic equipment. Supplier/dealer of : Larzep, Mega, Reelcraft, Riken, Simson, SPX Power Team, Vickers a.o. General conditions : Registered at the Chamber of Commerce. A copy can be sent to you on request or you can download it from our website Quality system/control : arbitrary in each department ISO standardization : none Company certification : none

BREEDVELD & WEAVER B.V. is located in the industrial area De Vergulde Hand. On Highway A20 Rotterdam-Hoek van Holland, take AFRIT 8 (exit 8) Vlaardingen-West.

7 BREEDVELD & WEAVER B.V. is located in the industrial area De Vergulde Hand. On Highway A20 Rotterdam-Hoek van Holland, take AFRIT 8 (exit 8) Vlaardingen-West. Follow the road signs HAVENS , go through Marathonweg. Cross over the railroad tracks and turn right, onto Maassluissedijk. Take the first right onto George Stephensonweg. You will find us on the left side of the road, number 33. GENERAL TECHNISCHE HANDELSONDERNEMING BREEDVELD & WEAVER HYDRAULICS G. STEPHENSONWEG 33 NL-3133 KJ VLAARDINGEN THE NETHERLANDS TEL (+31) (0) P.O. BOX 154 NL-3130 AD VLAARDINGEN THE NETHERLANDS FAX (+31) (0) info@breedveld-weaver.nl

8 TECHNISCHE HANDELSONDERNEMING BREEDVELD & WEAVER HYDRAULICS G. STEPHENSONWEG 33 NL-3133 KJ VLAARDINGEN THE NETHERLANDS TEL (+31) (0) P.O. BOX 154 NL-3130 AD VLAARDINGEN THE NETHERLANDS FAX (+31) (0)

9 GENERAL SALES REPAIR TECHNISCHE HANDELSONDERNEMING BREEDVELD & WEAVER HYDRAULICS

(hand) pumps and cylinders for industrail

Hydraulic lifting tables, cranes, trolley

Hose reels Hydraulic rams, hand pumps and

units for industrial, transport Hydraulic

valves and valves for industrial, marine

10 BREEDVELD & WEAVER imports/supplies: ENERPAC Hydraulic high pressure tools, (hand) pumps and cylinders for industrail and marine applications. Hydraulic bottle jacks, trolly jacks, bench presses and body repair kits. Hydraulic lifting tables, cranes, trolley jacks and benders Hydraulic high pressure Hose reels Hydraulic rams, hand pumps and electric-hydraulic pumps up to 2000 bar. SALES Proportional directional control valves. Hydraulic components. Hydraulic motors, pumps, gear boxes and presses. Hydraulic directional control valves, valves accumulators and hydraulic power units for industrial, transport and marine applications. Hydraulic components. Oil resevoirs. Hydraulic components. Quick release couplings. Filters. Gear pumps. Hydraulic pumps, directional control valves and valves for industrial, marine and transport applications. Quick release couplings.. Filters. Gear pumps and gear motors. Quick release couplings. Gear pumps. Hydraulic components. Automotive equipment Hydraulic wire rope cutters, manually or electric-hydraulic operated types. Gear pumps. REPARATIE-INRICHTING VOOR ALLE MERKEN HYDRAULISCHE APPARATUUR, KRIKS EN HEFW ERKTUIGEN. IMPORT - EXPORT

Compact hydraulic power units 12-380V, directional control

Hydraulic and mechanical wire rope cutters. Hydraulic cutters.

Couplings an bell-housings/flange adaptors used in Kompakt units

Hydraulic seals. Bolting tools. Hydraulic motors and pumps.

Directional control valves and hydromotors.

valves, valves and auxiliary plates. Valves.

Manually operated directional control valves, selectors, and

11 Valves and directional control valves. Filters and tank accessoiries. Gear pumps. Compact hydraulic power units V, directional control valves and auxilary plates. Gear pumps. Hydraulic and mechanical wire rope cutters. Hydraulic cutters. Accumulators. Valves. Hand pumps. Couplings an bell-housings/flange adaptors used in Kompakt units (micropowerpack). Hydraulische pumps, motors and components. Hydraulic seals. Bolting tools. Hydraulic motors and pumps. Axial piston pumps and motors, oribit motors. Directional control valves and hydromotors. Hydraulic wire rope cutters, manually or electric-hydraulic operated pump models. High pressure hydraulic rams and mechanical rams. Compact hydraulic power units V, directional control valves, valves and auxiliary plates. Valves. Valves and integrated components. Manually operated directional control valves, selectors, and special valves. Hydraulic wire rope cutters. Gauges. Hydraulic pumps, valves and directional control valves. In most cases other brands can also be supplied or repaired by us. REPARATIE-INRICHTING VOOR ALLE MERKEN HYDRAULISCHE APPARATUUR, KRIKS EN HEFW ERKTUIGEN. IMPORT - EXPORT

12 TECHNISCHE HANDELSONDERNEMING BREEDVELD & WEAVER HYDRAULICS G. STEPHENSONWEG 33 NL-3133 KJ VLAARDINGEN THE NETHERLANDS TEL (+31) (0) P.O. BOX 154 NL-3130 AD VLAARDINGEN THE NETHERLANDS FAX (+31) (0)

13 GENERAL SALES REPAIR TECHNISCHE HANDELSONDERNEMING BREEDVELD & WEAVER HYDRAULICS

Revision and repair of hydraulics REPAIR Already 50 years of experience in repairing hydraulic components. We are especially experienced in repairing hydraulic cilinders.

14 Revision and repair of hydraulics REPAIR Already 50 years of experience in repairing hydraulic components. We are especially experienced in repairing hydraulic cilinders. Due to favourable prices and extensive stocks of chrome axles in various mm- and inch-sizes, we are able to give a quotation in advance. In consultation quick turnaround is possible. We also supply parts, seals, u-cups, wipers, o-rings and repair sets for various kinds of hydraulic equipment.

Revision/repair of hydraulic cylinders Our service and repair department is equipped with up-to-date tools, a testing installation and other facilities.

Repair and/or overhaul of hydraulic cylinders is possible in most cases. It is therefore important to check if it is more profitable to repair and/or overhaul in case of failure or damage.

We also have great expertise in repairing, remanufactoring and testing cylinders and parts to specifications of old, damaged or not available or discontinued types, and/or to your specific needs,

15 Revision/repair of hydraulic cylinders Our service and repair department is equipped with up-to-date tools, a testing installation and other facilities. A team of well trained hydraulic engineers ensures a skilled revision and/or repair of most hydraulic cylinders. Even when they are not originally supplied by us. Repair and/or overhaul of hydraulic cylinders is possible in most cases. It is therefore important to check if it is more profitable to repair and/or overhaul in case of failure or damage. Just contact our chief engineer for a repair cost quote. REPAIR Modifying and upgrading shafts/rods, seals, bearing strips are a part of our daily activities. We also have great expertise in repairing, remanufactoring and testing cylinders and parts to specifications of old, damaged or not available or discontinued types, and/or to your specific needs, and/or manufacturers specifications. Rebuilding of old or discontinued cylinders and/or parts to specifications of the old model or to your specific needs is also one of our specialities. Price quotes and continious evaluation will give you as customer insight the progress of the repair. Repaired and overhauled cylinders are returned with a standard test report on request. Certification surveys can also be conducted in co-operation with institutes like Veritas, D.N.V., Lloyds and T.N.O.

hydraulic equipment and tools of many brands we operate a seperate service repair department.

, can be installed quickly, which results in a minimum delay in your activities.

up to 2800 bar and static rams up to 400 tonnes. Pumps, rams and mechanical jacks etc.

16 Repair of pumps, rams, etc. For servicing and repairing manual, pneumatic and electric driven pumps, rams, jacks, hydraulic equipment and tools of many brands we operate a seperate service repair department. Maintenance is an important issue and extends the lifetime of your hydraulic tools and equipment. Due to a extensive inventory, replacement parts, like hydraulic hoses, gauges and seals etc., can be installed quickly, which results in a minimum delay in your activities. The use of genuine seals and/or other service parts ensures a good and economical repair in most cases. REPAIR Our test facilities enable us to conduct various testing methods, like testing pumps up to 2800 bar and static rams up to 400 tonnes. Pumps, rams and mechanical jacks etc. should be dismounted, inspected and tested at least once every year by order of the Dutch Labour Inspectorate. We gladly carry out these services for you. Trade-in of equipment, pumps and/or pallet trucks that is damaged or needs to be repaired is possible. After assessment and an estimation of the repair costs a trade-in offer can be made on request.

and complete systems we operate a specialised department.

17 Repair of pump units, valves, etc. For repairing, constructing and modifying electric driven pump units, valves and complete systems we operate a specialised department. On request we are able to conduct full or partial repair of the hydraulic system or unit. Even the annual maintenance and testing of your pumps and systems can be carried out by us. REPAIR For testing pumps and systems we use a PLC-controlled test facility. We are also able to revise large valves equipped with electric directional control valves which meet the EEx-d requirements. After repair and/or replacement the valves will be set, adjusted and tested.

18 TECHNISCHE HANDELSONDERNEMING BREEDVELD & WEAVER HYDRAULICS G. STEPHENSONWEG 33 NL-3133 KJ VLAARDINGEN THE NETHERLANDS TEL (+31) (0) P.O. BOX 154 NL-3130 AD VLAARDINGEN THE NETHERLANDS FAX (+31) (0)

19 GENERAL SALES REPAIR TECHNISCHE HANDELSONDERNEMING BREEDVELD & WEAVER HYDRAULICS

Monopile upending and guidance system MPI

installation vessel of MPI the "Resolution"

being possible with the 350 tonnes revolving

These monopiles are used for the wind park

20 Monopile upending and guidance system MPI "Resolution" During April 2005 the installation vessel of MPI the "Resolution" (TIV1) was fitted with a new monopile upending and guidance system, used for installing larger and heavier monopiles than being possible with the 350 tonnes revolving crane. These monopiles are used for the wind park Barness in Furness near the Isle of Man in the United Kingdom. The monopiles have a length of 60 mtrs, a diameter of 4.60 meters and a weight of 480 tonnes. The monopile upending and guidance system, classed by DNV, is equipped with hydraulic gripping and closing cylinders supplied by BREEDVELD & WEAVER.

The monopiles are loaded into the system

21 The monopiles are loaded into the system using diepladers up to the point of overturn. A hydraulically controlled winch overturns and moves the system overboard, using the hydraulic cylinders for gripping and positioning the monopile. Max. monopile weight: 600 tonnes Max. monopile diameter: 4.0 to 6.0 mtrs Upending angle: 0-90 dgrs Upending speed: 9 min. If you have any questions or would like to receive information about a similar product, project or application, please contact our Sales Manager Mr. A.C. van Iwaarden or visit our website

Hydraulic tension in a modern glass roof The design of a new bank building in Madrid, Spain, incorporates a glass dome roof,

A steel tubular ring, made of large square tube segments, is mounted on top of a circular concrete wall.

consisting of special rafters and wires, by 4 rods (M36), which are leading through to the inside of the steel ring.

Before the glass panels could be attached, the supporting structure, with a diameter of 31,1 meters, had to be simultaneously

This was done by using the brackets and thirtysix 30 tonnes cylinders, after which the entire structure could be fastened,

The 36 ENERPAC single acting cylinders RCS 302, electric pump unit and hoses with a total length of 400 meters, including

22 Hydraulic tension in a modern glass roof The design of a new bank building in Madrid, Spain, incorporates a glass dome roof, with a minimum of glass panel joints. The construction of this glass roof embodies an architectural masterpiece. A steel tubular ring, made of large square tube segments, is mounted on top of a circular concrete wall. Specially made brackets, situated on the outside of the ring, are connected to the supporting structure of the roof, consisting of special rafters and wires, by 4 rods (M36), which are leading through to the inside of the steel ring. The large glass panels will be fitted to the rafters, creating the actual roof. Before the glass panels could be attached, the supporting structure, with a diameter of 31,1 meters, had to be simultaneously tensioned at 36 points. This was done by using the brackets and thirtysix 30 tonnes cylinders, after which the entire structure could be fastened, thus forming a rigid construction. The 36 ENERPAC single acting cylinders RCS 302, electric pump unit and hoses with a total length of 400 meters, including manifolds etc. were supplied by BREEDVELD & WEAVER. Also, the client participated in a operating and safety course, which contributed to a safe and smooth progress of the project, within the estimated time. If you have any questions or would like to receive information about a similar product, project or application, please contact our Sales Manager Mr. A.C. van Iwaarden or visit our website

Side loader Hooymeijer is a transport company

feet containers with a maximum of 22 tonnes.

receive information about a similar product,

23 Side loader Hooymeijer is a transport company which focusses on special transports and loading and unloading of ships (stevedoring). One of the unique trucks Hooymeijer has developed is the side loader. This truck uses a side load system to load 20 feet containers with a maximum of 22 tonnes. The hydraulic cylinders and systems are supplied by BREEDVELD & WEAVER. If you have any questions or would like to receive information about a similar product, project or application, please contact our Sales Manager Mr. A.C. van Iwaarden or visit our website

Hydraulic seafastening system installation vessel Marine Projects International constructs, installs and provides maintenance

For constructing the foundations, installing the towers called monopiles and mountingthe turbines and rotors MPI developped the

BREEDVELD & WEAVER supplied the system with 24 600 tonnes special double acting cylinders and 24 330 tonnes special double acting

Before carrying out the various proceedings like installing the monopiles the vessel jacks up using eight extendable legs which

24 Hydraulic seafastening system installation vessel Marine Projects International constructs, installs and provides maintenance services for offshore wind parks in the Northsea and other regions. For constructing the foundations, installing the towers called monopiles and mountingthe turbines and rotors MPI developped the Turbine Installation Vessel 1 (TIV1) Resolution, a unique ship equipped with a hydraulic Seafastening system. BREEDVELD & WEAVER supplied the system with tonnes special double acting cylinders and tonnes special double acting cylinders. The special cylinders are furnished with several ceramic coatings. Before carrying out the various proceedings like installing the monopiles the vessel jacks up using eight extendable legs which are then hydraulicly fastened, thus creating a stable platform. If you have any questions or would like to receive information about a similar product, project or application, please contact our Sales Manager Mr. A.C. van Iwaarden or visit our website

Salvaging freighter Tricolor On 14 December 2002 the Norwegian freighter Tricolor with a total length of

Authorities ordered the Tricolor to be removed, as it was perceived to represent a danger to shipping and

It was cut into 9 sections using a cutting wire, after which the separate sections were transported to

During cutting the grit-covered bushes mounted along the high-tension steel cable are kept in place using

These rams were supplied by BREEDVELD & WEAVER.

25 Salvaging freighter Tricolor On 14 December 2002 the Norwegian freighter Tricolor with a total length of 190 meters, sank as a result of a collision in thick fog out of the Belgian-French coast. Authorities ordered the Tricolor to be removed, as it was perceived to represent a danger to shipping and the environment. Because of its size and bad condition, the wreck could not be salvaged in one piece. It was cut into 9 sections using a cutting wire, after which the separate sections were transported to Zeebrugge for further scrapping on land. Prior to cutting the wire is strung under the wreck. During cutting the grit-covered bushes mounted along the high-tension steel cable are kept in place using 100 tonnes double acting hollow plunger rams, fitted with accumulators to maintain a constant pressure. These rams were supplied by BREEDVELD & WEAVER. If you have any questions or would like to receive information about a similar product, project or application, please contact our Sales Manager Mr. A.C. van Iwaarden or visit our website

Allignment system wind turbine towers Some 10 kilometers off

offshore wind turbine park is being constructed by Airtricity

MegaWatts. The turbines, with a capacity of 3.

meters are the single largest ever used.

called monopiles, with a base diameter of 5 meters, onto

Again, BREEDVELD & WEAVER supplied the allignment systems

return cylinders including shut-off valves, hoses,

If you have any questions or would like to receive

26 Allignment system wind turbine towers Some 10 kilometers off the coast of Arklow in the east of Ireland the first Irish offshore wind turbine park is being constructed by Airtricity consisting of 7 turbines, with a total capacity of 25,2 MegaWatts. The turbines, with a capacity of 3.6 MW, a weight of 290 tonnes and a rotor diameter of 104 meters are the single largest ever used. Prior to permantly installing the 72 meters high towers, called monopiles, with a base diameter of 5 meters, onto their seabed foundation, they have to be hydraulicly alligned. Again, BREEDVELD & WEAVER supplied the allignment systems consisting of 7 sets with a total of 42 single acting spring return cylinders including shut-off valves, hoses, connectors, manifolds and 7 two-stage hand pumps. If you have any questions or would like to receive information about a similar product, project or application, please contact our Sales Manager Mr. A.C. van Iwaarden or visit our website

Allignment system wind turbine towers Some 7 to 8 kilometers off the North Wales

consisting of 30 wind turbines, with a total capacity of 60 MegaWatts.

base diameter of 4 meters, onto their seabed foundation, they have to be hydraulicly

An ENERPAC allignment system, supplied by BREEDVELD & WEAVER, is used for this

This system consists of 10 sets with a total of 60 cylinders including shut-off

27 Allignment system wind turbine towers Some 7 to 8 kilometers off the North Wales coast between Prestatyn and Rhyl, a wind turbine park is being constructed, consisting of 30 wind turbines, with a total capacity of 60 MegaWatts. Prior to permanently installing the 67 meters high towers, called monopiles, with a base diameter of 4 meters, onto their seabed foundation, they have to be hydraulicly alligned. An ENERPAC allignment system, supplied by BREEDVELD & WEAVER, is used for this purpose. This system consists of 10 sets with a total of 60 cylinders including shut-off valves, hoses, connectors, 10 manifolds and 10 hand pumps. If you have any questions or would like to receive information about a similar product, project or application, please contact our Sales Manager Mr. A.C. van Iwaarden or visit our website

BREEDVELD & WEAVER suplied the eight 200 tonnes cylinders with a stroke of 50 mm, used for the pipeline fastening system of the

28 J-Lay Tower IHC Gusto developed the Modular J-Lay Tower for Heerema, a system designed for subsea pipelaying, and can be mounted on a wide range of installation vessels. BREEDVELD & WEAVER suplied the eight 200 tonnes cylinders with a stroke of 50 mm, used for the pipeline fastening system of the tower. If you have any questions or would like to recieve information about a similar product, project or application, please contact our Sales Manager Mr. A.C. van Iwaarden or visit our website

Aquadigger Royal Boskalis Westminster is constructing Palm Island,

One of the unique vessels used is the Aquadigger.

cylinders for use in these specific conditions like salt water and

TOEPASSING If you have any questions or would like to receive

29 Aquadigger Royal Boskalis Westminster is constructing Palm Island, an artificial island off the coast of Dubai, Middle-East. One of the unique vessels used is the Aquadigger. BREEDVELD & WEAVER carried out the overhaul and modified the large cylinders for use in these specific conditions like salt water and hard rock bottom. TOEPASSING If you have any questions or would like to receive information about a similar product, project or application, please contact our Sales Manager Mr. A.C. van Iwaarden or visit our website

Anchor chain cutter Offshore Rentals Ltd.

Several weeks later this was rewarded with the order to

30 Anchor chain cutter Offshore Rentals Ltd. supplies rental equipment for all aspects of oil and gas exploration. During maintenance large anchor chains are cut using two 500 tonnes double acting cylinders. BREEDVELD & WEAVER carried out a swift repair. Several weeks later this was rewarded with the order to supply 2 new ENERPAC electric high pressure pumps PPN 9483 with which a new system was built. If you have any questions or would like to receive information about a similar product, project or application, please contact our Sales Manager Mr. A.C. van Iwaarden or visit our website

Hydraulic injection moulds oil and gas well

organisation in the oil and gas exploration,

The various plugs are produced using hydraulic

The electric-hydraulic pump units, cylinders and

31 Hydraulic injection moulds oil and gas well cementing plugs Weatherford, a leading worldwide organisation in the oil and gas exploration, produces cementing plugs for oil and gas wells. The various plugs are produced using hydraulic operated injection moulds. The electric-hydraulic pump units, cylinders and controls of these systems were supplied by BREEDVELD & WEAVER. If you have any questions or would like to receive information about a similar product, project or application, please contact our Sales Manager Mr. A.C. van Iwaarden or visit our website

Lifting highway viaduct BREEDVELD & WEAVER supplied

used for lifting a 2400 tonnes highway viaduct.

cylinders which have a stroke of 300 mm and are

other components for safely moving this viaduct.

information about a similar product, project or

32 Lifting highway viaduct BREEDVELD & WEAVER supplied Freyssinet (formerly Samaco) an ENERPAC lift system used for lifting a 2400 tonnes highway viaduct. The system consists of tonnes single-acting cylinders which have a stroke of 300 mm and are equipped with a lock nut, used for mechanicly locking the load during lifting. The systems also includes several pumps, hoses and other components for safely moving this viaduct. If you have any questions or would like to receive information about a similar product, project or application, please contact our Sales Manager Mr. A.C. van Iwaarden or visit our website

Computer controlled testing BREEDVELD & WEAVER supplied Fa. Loggers with the ENERPAC computer controlled hydraulic testing system designed for testing rubber shock absorbers.

33 Computer controlled testing BREEDVELD & WEAVER supplied Fa. Loggers with the ENERPAC computer controlled hydraulic testing system designed for testing rubber shock absorbers. Loggers manufactures absorbers which are used in a wide range of industries and branches like the offshore industry, defence market (in particular the Navy) and transport. During testing, the computer records pressure, distance and force with great accuracy and exports the results to a TXT-file, which can be imported in Excel to generate and print test graphs. A good example of computer-aided hydraulic applications. If you have any questions or would like to receive information about a similar product, project or application, please contact our Sales Manager Mr. A.C. van Iwaarden or visit our website

34 TECHNISCHE HANDELSONDERNEMING BREEDVELD & WEAVER HYDRAULICS G. STEPHENSONWEG 33 NL-3133 KJ VLAARDINGEN THE NETHERLANDS TEL (+31) (0) P.O. BOX 154 NL-3130 AD VLAARDINGEN THE NETHERLANDS FAX (+31) (0)

BREEDVELD & WEAVER HYDRAULICS

BREEDVELD & WEAVER HYDRAULICS GENERAL SALES REPAIR APPLICATION TECHNISCHE HANDELSONDERNEMING HYDRAULICS GENERAL HISTORY On 25 April 1955 the company was founded and seated in the heart of Rotterdam at the Bolwerk. At this time the