TRAI LER & VEHICLE ACC ESSO R I E S

Transcription

1 2014 TRAI LER & VEHICLE ACC ESSO R I E S P R E M I E R T O W I N G P R O D U C T S M A N U F A C T U R E R

2 DRAW-TITE GIVES YOU TOP QUALITY IN EVERY HITCH AND RECEIVER WE MAKE: Solid all-welded construction for maximum strength and safety Custom built according to manufacturer & model year to ensure perfect fit and top towing performance Computer-aided design and fatigue stress testing ensure a strong design that will withstand road abuse within specified capacities All hitches meet or exceed V-5 and SAE J684 standards and are inspected for quality and workmanship Backed by a nationwide limited lifetime warranty CLASS I SPORTFRAME Part No. Series 24XXX square receiver tube opening Economical Class I receiver style hitch Comes complete with removable drawbar, pin and clip Attaches to vehicle frame and/or bumper Weight Carrying Up to 2,000 lbs. Up to 200 lbs. CLASS II FRAME HITCH Part No. Series 36XXX square receiver tube opening Receiver style hitch with removable drawbar Comes complete with removable drawbar, pin and clip Neat appearance and all frame attachments Weight Carrying Up to 3,500 lbs. Up to 300 lbs. NOW YOU SEE IT, NOW YOU DON T! ONCE INSTALLED THE INVISIBLE HITCH IS COMPLETELY HIDDEN FROM VIEW! sold separately sold separately CLASS I/II INVISI-HITCH Part No. Series 285XX square receiver tube opening One piece construction for a stronger hitch and easier installation Direct attachment allows hitch to be affixed well under vehicle for minimum visibility when drawbar is removed Includes mounting hardware and easy to read instructions Removable drawbar & accessory adapter sold separately Weight Carrying Up to 3,500 lbs. Up to 300 lbs. A-3

3 CLASS III/IV SQUARE & ROUND TUBE MAX-FRAME RECEIVERS Part No. Series 75XXX 2 square receiver tube opening Max-Frame receivers are designed for customers with trucks, vans and sport utility vehicles Designed for today s stylish sport utility vehicles, round tube receivers complement vehicle appearance All frame attachments Ball mount, hitch ball, wiring and accessories sold separately J-Pin ready 75XXX ball mounts #23 and #53 are available (Max-Frame Program) Weight Carrying Up to 8,000 lbs. Up to 1,200 lbs. Weight Distributing Up to 12,000 lbs. Up to 1,200 lbs. CLASS III/IV MAX-E-LOADER RECEIVERS Part No. Series 41XXX 2 square receiver tube opening Max-E-Loader s long side bracket design distributes the towing load over a greater portion of the tow vehicle frame All frame attachments J-Pin ready Weight Carrying Up to 6,000 lbs. Up to 600 lbs. Weight Distributing Up to 12,000 lbs. Up to 1,200 lbs. Scan this barcode with your mobile phone for quick access to HitchMatch.net CARGO ACCESSORY MATCHING GUIDE What kind of cargo accessory can I use on my hitch? How much can I safely carry? Know the answers with HitchMatch, a revolutionary new hitch and accessory matching system. See inside back cover for program details. A-4

4 ULTRA FRAME RECEIVERS & ACCESSORIES ULTRA FRAME RECEIVERS With Cast Center Section CLASS V ULTRA FRAME RECEIVERS Part No. Series 419XX 2 square receiver tube opening Designed for full-size long wheelbase trucks, vans and utility vehicles with full frames and heavy-duty suspensions Ideal for high tongue weight applications (Example: Toy Hauler) Strong, secure heavy-duty side bracket design All frame attachments J-Pin ready NEW! Redesign of Ultra Frame receivers to include Cast Center Section New rugged appearance Cast steel material Bigger chain loops Tighter ball mount fit Reinforced pin hole CLASS V ULTRA FRAME RECEIVERS Weight Carrying Up to 15,000 lbs. Up to 1,500 lbs. Weight Distributing Up to 16,000 lbs. Up to 1,600 lbs. CLASS V ULTRA FRAME RECEIVERS WITH CAST CENTER SECTION Weight Carrying Up to 16,000 lbs. Up to 2,400 lbs. Weight Distributing Up to 16,000 lbs. Up to 1,600 lbs. NOTE: Contact Customer Service for availability of new Cast Center Section part numbers STYLE 3 STYLE 1 SOLID SHANK BALL MOUNTS Part No. Rating (lbs.) GTW/TW Ball Hole Size A Length B Rise C Drop ,000/1, /4 8-1/ ,000/1, / ,000/1, /4 8-1/ ,000/1, / ,000/1, /4 9-1/ ,000/1, /4 9-1/ Style HITCH BALLS All hitch balls designed with wrench flats Ball Shank Shank Drawbar GTW Dia. Finish Dia. Length Thickness GVWR A Zinc Chrome B C Range Rating 2-5/ /4 2-3/ , / # 1-1/4 2-3/4 3/8-1 14, / # 1-1/4 2-3/4 3/8-1 20,000 # Hitch ball requires use with like rated receiver & ball mount. Consult tow vehicle owners manual for maximum towing capacities. WEIGHT DISTRIBUTING TRUNNION STYLE Raised hitch ball platform eliminates the need for raised hitch balls Easy-to-use serrated washer Forged ball platform and spring bar mounts Rated up to 15,000 lbs. GTW / 1,500 lbs. TW Part No ## Weight Distibuting Hitch 15,000 lbs. 1,500 Use Shank #63970 or #63971 ## Designed to be used with Ultra Frame receivers A-5

5 SELECTING THE RIGHT BALL MOUNT & HITCH BALL LENGTH Distance from the center of the ball hole to the center of the pin hole SELECTING THE RIGHT BALL MOUNT Tow vehicle and trailer level Trailer not level LENGTH RISE Distance from the top of the shank to the top of the ball platform CORRECT For safe, comfortable towing, the trailer should always be set up to tow on a level plane. INCORRECT Sometimes a trailer s tongue is higher or lower than the ball mount on the vehicle, and a ball mount with a rise or a drop is required to level the trailer. RISE DROP Distance from the top of the shank to the top of the ball platform DROP MEASURING FOR THE PROPER BALL MOUNT 1. Measure from the ground to the top of the hitch. 2. Measure from the ground to the (inside) top of the trailer coupler, when level. 3. Subtract the height of the hitch ball (most are 2-1/2-3 high) from coupler measurement. 4. An 8 drop is needed to make the trailer level. THE DIFFERENCE IN THE TWO MEASUREMENTS IS THE AMOUNT OF BALL MOUNT RISE OR DROP REQUIRED. HITCH ACCESSORIES A DIAMETER B SHANK DIAMETER C SHANK LENGTH SELECTING THE RIGHT HITCH BALL Selecting the right hitch ball is a must for trouble-free towing. Always use the properly rated hitch ball for your towing system. Your towing system s maximum weight rating is always equal to the lowest rated item in the system Your hitching system cannot be upgraded to a rating higher than the maximum rating of your hitch For example, a 3,500 lbs. ball on a 2,000 lbs. max trailer weight-rated hitch does not increase your towing capacity to 3,500 lbs. Your hitching system is still rated at 2,000 lbs. Conversely, a 2,000 lbs. ball on a 3,500 lbs. max trailer weight-rated hitch decreases your maximum towing capacity to 2,000 lbs. The hitch ball diameter (A) must be the same diameter as the trailer coupler (1-7/8, 2, or 2-5/16 ). The shank diameter (B) of the hitch ball should be the same as the hole diameter in the (correct) ball mount you selected. The shank length (C) should be long enough to allow at least two threads to be visible when the hitch ball is installed and the nut completely tightened. B-1

6 HITCH ACCESSORIES HITCH BALLS Interchangeable Hitch Ball System Hitch Balls BALL MOUNTS Class I & II Drawbars Ball Mounts Solid Forged Ball Mounts Aluminum Solid Forged Ball Mounts Hollow Shank Ball Mounts Solid Shank Ball Mounts Titan Ball Mounts Cushioned Ball Mounts Towing Starter Kits Adjustable Ball Mounts Reversible Dual / Tri-Ball Mounts Super Titan Dual-Ball Mounts Titan Tri-Ball Mount HITCH ACCESSORIES Bumper Guard Reducer Bushing Receiver Adapters Reducer Sleeves Receiver Extensions PINTLE HOOKS AND ACCESSORIES Pintle Hooks / Mounts Pintle Accessories PINS / CLIPS / LOCKS / TUBE COVERS Pins and Clips Hitch / Trailer / Couplers Locks Tube Covers HITCH ACCESSORIES B-2

7 ELECTRICAL WIRING & ACCESSORIES T-ONE CONNECTORS Universal T-Connector T-One Connectors T-One Application Guide MODULITE POWER MODULES / CONVERTERS ModuLite Power Modules Taillight Converters Multi-Fit Wiring Harness 4-WAY FLAT CONNECTORS & WIRING 4-Way Flat Wire Harnesses 4-Way Flat Wire Harness w/coiled Cable 4-Way Round Pin Connectors 4-Way Flat Knockout Connector 4-Way Flat Connectors w/jacketed Cable 2-WAY FLAT CONNECTORS & WIRING 2-Way Flat Wire Harnesses DUST COVERS 4-Way /5-Way Flat Dust Covers 5-WAY FLAT CONNECTORS & WIRING 5-Way Flat Wire Harnesses 5-Way Flat Wire Harness w/coiled Cable 6-WAY ROUND PIN / SQUARE CONNECTORS & WIRING 6-Way Metal / Zinc Die Cast Connectors 6-Way Square Connectors 6-Way Super Sealed Car Ends with Cable 6-Way Molded Trailer End Connectors with Cable 6-Way / 7-Way Trailer Extensions 7-WAY RV BLADE CONNECTORS & WIRING 7-Way Thermo-Plastic / Metal Connectors 7-Way Super Sealed Car Ends with Cable 7-Way Molded Trailer End Connectors with Cable - RV Clocking 7-Way Cold Weather Molded Trailer End Connectors with Cable - Cold Weather Clocking 7-Way 90 Molded Plug with Cable / Application Chart 7-Way US Car Pre-Wired Cables 7-Way Trailer Extensions / Replacement Kit 7-WAY ROUND PIN AG / TRAILER CLOCKING CONNECTORS & WIRING 7-Way Round Pin AG Connectors 7-Way Molded Trailer End Connectors with Cable - Trailer Clocking Magnet Kit / Tandem Haul Adapter AG Light Enhanced Lighting Modules / AG Extension Harnesses AG Lighting VEHICLE / TRAILER ADAPTERS/JUMPERS Vehicle / Trailer Adapters/Jumpers ELECTRICAL ACCESSORIES Connector Mounting Brackets / Boxes Junction / Breaker Boxes Heavy Duty Flashers Primary Wire Wiring / Hardware Components Circuit Breakers Dielectric Silicone Compound / Grease / Tape AG LIGHTING - TECHNICAL AG Lighting - Technical WIRING DIAGRAMS Wiring Diagrams - 4-Way/5-Way/6-Way/7-Way ELECTRICAL WIRING & ACCESSORIES C-2

8 TIMED BRAKE CONTROLS 5520 BRAKE CONTROL 1 to 4 axle trailers Overload indicator Digital output indicator Up-front manual over-ride control Soft touch thumb wheels Front display allows viewing at almost any angle Stylish upgraded appearance Mounts in any position No leveling required Mounting hardware included Integrated Plug & Play port for 2-plug adapters Limited Lifetime Warranty Part No. Description Packaging 5520 Activator III Electronic Brake Control Clam - Draw-Tite NOTE: Plug & Play feature allows quick and easy connection. It adapts to all Cequent 2-Plug vehicle specific brake control wiring harnesses. BRAKE CONTROL 1 to 4 axle trailers Digital output indicator Thumb wheel output adjustment Overload indicator Plug & Play feature allows quick and easy connection Attractive point-of-purchase display packaging Limited Lifetime Warranty Part No. Description Packaging 5500 Activator II Electronic Brake Control Clam - Draw-Tite Note: Not recommended for use with BMW X5 Sport Utility Vehicles 5500 BRAKE CONTROLS 5100 BRAKE CONTROL 1 & 2 axle trailers Illuminated LED output indicator Slide adjustment output control Plug & Play feature allows quick and easy connection Attractive point-of-purchase display packaging 5 year limited warranty Part No. Description Packaging 5100 Activator Electronic Brake Control Clam - Draw-Tite Note: Not recommended for use with BMW X5 Sport Utility Vehicles H-9