-OVER 750 LOTS! Live/Webcast Auction LATE MODEL CNC INJECTION MOLDING FACILITY. Sale Date: Tuesday, 9 th November at 9:00 AM EST. Talhin/T Corporation

Transcription

1 By Order of Court Appointed Trustee Talhin/T Corporation Live/Webcast Auction Sale Date: Tuesday, 9 th November at 9:00 AM EST LATE MODEL CNC INJECTION MOLDING FACILITY New-2004 Husky 800 ton electric injection molder -OVER 750 LOTS! New-2004 Nissei 400 ton electric injection molder, New-2008 Advantage 100 ton chiller system Location: 2105 Solar Crescent & 5350 Pulleyblank St., Oldcastle (Windsor), Ontario N0R 1L0 Inspection: Monday, 8 th November from 9:00 AM to 4:00 PM or by appointment The auction will be conducted theatrestyle from the 2105 Solar Crescent site. Auction will be conducted in U.S. dollars Items Subject to Prior Sale

2 LATE MODEL CNC INJECTION MOLDING FACILITY OVER 750 LOTS! 1998 HPM MLH1100-WP ton injection molder, s/n 97455, w/ HPM PLC control, Yushin Netliner VNII-EA-850S robot 1999 NISSEI FV ton injection molder, s/n S91U002, w/ PLC control, Yushin Netliner VNII-EA-850S robot (3) 1998 KAWAGUCHI KM650B2 716 ton injection molder, s/n XL-XZ1043, XL-XZ1042, XB-XZ1021 w/ Yushin robot (various models) (29) INJECTION MOLDING MACHINES (Robots Sold Separately) New Available Nissei 500 ton injection molder & robot 2004 HUSKY Hylectric 800RS115/ ton electric injection molder, s/n , w/ Polaris control 2004 NISSEI NEX ton electric injection molder, s/n H36Y308, w/ Tact control, Yushin Webliner RAIIa-400 robot 2001 Engel 500 EX2000HP/ 1300HP/500WP 500 ton twin screw injection molder. s/n 71056, w/ Engel PLC control, Star TW-1500 BM robot (2) 1999 NISSEI FN ton injection molders, s/n S46U007, S46T026, w/ Nissei NC9300T control, Yushin Netliner VNXII robot Continued on next page HPM MLH1650-WP ton injection molder, s/n 97456, w/ HPM Command 9000 control, Yushin Netliner VNII-EA-850S robot New-1998 HPM 1100 ton injection molder & robot New-1999 Nissei 720 ton injection molder & robot 2 For further information, contact: BRYAN GOODMAN Tel: (410) ext bryan.goodman@go-dove.com Auction will be conducted in U.S. dollars Items Subject to Prior Sale

3 Live/Webcast Auction Tuesday, November 9 th at 9:00 AM EST Continued... (29) INJECTION MOLDING MACHINES 1998 VAN DORN DEMAG 500HT ton injection molder, s/n 0481, w/ Pathfinder 3000 control, Automation Engineering robot 1999 UBE UM500T 500 ton injection molder, s/n 83957, w/ Humma-X control, Yushin VNXII robot New Available Kawaguchi 716 ton injection molder & robot (2) 1999 & 1998 UBE 125/80B 500 ton injection molders, s/n 83077, 83073, w/ A.B. Panelview 900 control, Yushin VNXII robot (2) 2003 & 2002 NISSEI FN ton injection molders, s/n S28X082 w/ Yushin RAII-A-250 robot, s/n S28X047 w/ Yushin VNXII-250S robot (2) 1997 & 1995 KAWAGUCHI KM ton injection molders. s/n PB-XZ1173, PD-SZ1036, w/ Yushin VNXII- 250S robot New Shot Engel 500 ton twin screw injection molder & robot 2004 NEGRI BOSSI VE ton injection molder, s/n KAWAGUCHI KM220B 242 ton injection molder, s/n NC-SZ1055, w/ Yushin VN-EA-150S robot Continued on next page... New-1998 HPM 1650 ton injection molder & robot New-1998 Van Dorn Demag 500 ton injection molder & robot For details on this auction, please visit it our website: 3

4 LATE MODEL CNC INJECTION MOLDING FACILITY OVER 750 LOTS! Continued... (29) INJECTION MOLDING MACHINES (2) 1997 & 1995 KAWAGUCHI KM180B2 198 ton injection molders, s/n LA-XZ1254, LD-SZ1070, w/ Yushin robot (2) 1996 KAWAGUCHI KM ton injection molders, s/n JK-TZ1273, JK-TZ1272, w/ Yushin robot (2) 1998 & 1997 KAWAGUCHI KM50B2 55 ton injection molders, s/n DH-XZ1224, DA-YZ1269, (1) w/ robot New Available UBE 500 ton injection molder & robot ENGEL 450 ton tri-screw injection molder, s/n n/a CHILLERS & TEMPERATURE CONTROL UNITS 2008 ADVANTAGE Titan TIP-100W 100 ton chiller, s/n ADVANTAGE TTK P chiller ADVANTAGE TTK P cooling tower, s/n (15) ADVANTAGE temperature control units, various models (14) HUSKY, DME hot runners, various zone capacities New Available Nissei 309 ton injection molder & robot NEXTEQ SF :1 water control system New Available Kawaguchi 308 ton injection molder & robot New-2004 Negri Bossi 300 ton injection molder 4 For further information, contact: BRYAN GOODMAN Tel: (410) ext bryan.goodman@go-dove.com Auction will be conducted in U.S. dollars Items Subject to Prior Sale

5 Live/Webcast Auction Tuesday, November 9 th at 9:00 AM EST Kawaguchi 242 ton injection molder 2 Available Kawaguchi 198 ton injection molder & robot 2 Available Kawaguchi 154 ton injection molder & robot 2 Available Kawaguchi 55 ton injection molder & robot Advantage cooling tower Dri-Air dryer/hopper New-2008 Dri-Air computerized dryer/hopper New-2001 Novatec dryer/hopper MATERIAL HANDLING & GRANULATORS 2008 DRI-AIR HP-4-X-750 FM computerized dryer/hopper, s/n D NOVATEC MPC-500 dryer/hopper, s/n NOVATEC MPC-100 dryer/hopper, s/n 10A (15) CONAIR, DRI-AIR dryer hoppers, various models (12) MAGUIRE color blenders, various models NUCON WHITMAN central feed system, 15 hp (2) 12 dia x 30 H and 12 dia x 32 H material silos ROTOGRAN WO2224SD 40 hp granulator CONAIR 20 hp granulator (14) ROTOGRAN, RAPID, MOULD-TEK granulators, up to 15 hp RAW MATERIAL 13,000 kg of virgin plastic material 31,000 kg of regrind Also, cardboard & packaging material For details on this auction, please visit our website: 5

6 LATE MODEL CNC INJECTION MOLDING FACILITY OVER 750 LOTS! Conair dryer/hopper (2) Conair Franklin dryers (2) Material silos Granulators Mould-Tek central feed system BRIDGE CRANES 2008 DEMAG 27.5 ton overhead bridge crane, w/ approximately 46 double girder span, 2-speed control, s/n DEMAG 14 ton overhead bridge crane, w/ approximately 50 double girder span, 2-speed control Rotogran 40 hp granulator Hot runners DEMAG 10 ton overhead bridge crane, w/ 5 ton auxiliary hook, approximately 46 span, 2-speed control Late Model Demag 27.5 ton bridge crane 6 For further information, contact: BRYAN GOODMAN Tel: (410) ext bryan.goodman@go-dove.com Auction will be conducted in U.S. dollars Items Subject to Prior Sale

7 Live/Webcast Auction Tuesday, November 9 th at 9:00 AM EST CUTLER HAMMER switchgear Also, disconnects, panels, motor controls, cable and more! GARDNER DENVER 50 hp air compresssors 5 Ton Aux. Demag 10 ton bridge crane Also, adjustable pallet racks, mold racks, rigging equipment, floor scales, shop ladders, dumping hoppers, conveyors, electrical & plumbing hardware, hand & power tools, machine parts and much more! Switchgear Demag 14 ton bridge crane FACTORY EQUIPMENT ENERQUEST transformer, mod. EQS-34.5-TLO, s/n ;, wire 3-Ph-3w; max volts 27,600/34,500: Sys. Amp 600A; Cap. 25Ka-150kv-60 Hz Location: 2105 Solar Crescent & 5350 Pulleyblank St., Oldcastle (Windsor), Ontario N0R 1L0 Inspection: Monday, 8 th November from 9:00 AM to 4:00 PM or by appointment The auction will be conducted theatrestyle from the 2105 Solar Crescent site. Enerquest transformer Gardner Denver shop air compressor Pallet racking For details on this auction, please visit our website: 7

8 Information provided is believed to be accurate, but is not guaranteed. Detroit Metropolitan Wayne County Airport Directions: From Detroit Metropolitan Wayne County Airport to 2105 Solar Crescent: I-94 East toward Detroit for 5.7 miles. Take Exit 204, Rt. 39, Southfield Freeway. Drive 2 miles and merge onto I-75 North toward Detroit. Drive 7.3 miles and take Exit 47B toward Bridge to Canada. Stay straight to go onto Lafayette Blvd West which becomes West Fisher Freeway. Turn right onto Ambassador Bridge crossing into Canada. This becomes Provincial Rt. 3 South. Drive 8 miles and turn left onto Walker Rd., Rt. 11. Drive.6 mile and turn left onto Olympia Drive. Drive.2 mile and turn right onto Solar Crescent to auction site on the left. From Windsor Airport to 2105 Solar Crescent: Drive west on CR-42 toward 7th Conc. CR-42 becomes Division Street. Turn left onto Walker Road. Drive 2 miles and turn right onto Olympia Drive. Drive.2 miles and turn right onto Solar Crescent to auction site on the left. AIRPORT: Detroit Metropolitan Wayne County Airport OVERNIGHT ACCOMMODATIONS: FINANCING YOUR AUCTION PURCHASE Conserve your cash and increase your bidding power. Auction Lease provides equipment financing with approvals from $5,000 to $999,000. (800) Apply Online: Buy what appreciates, Lease what depreciates. J. Paul Getty 2105 Solar Crescent & 5350 Pulleyblank St., Oldcastle Holiday Inn Select 1855 Huron Church Road Windsor, Ontario N9C 2L6 (800) Please note that you use the services of at your own risk and expense. GoIndustry is not in any way liable for any acts or omissions of Hampton Inn & Suites 1840 Huron Church Road Windsor, Ontario N9C 2L5 (519) Sale Date: Tuesday, 9 th Nov. at 9:00 AM EST Location: 2105 Solar Crescent & 5350 Pulleyblank St., Oldcastle (Windsor), Ontario N0R 1L0 Inspection: Monday, 8 th November from 9:00 AM to 4:00 PM or by appointment TERMS OF SALE: NO WARRANTIES: Every item and lot in the Auction is sold: (a) AS IS, WHERE IS AND WITHOUT RECOURSE, and (b) with no warranties, guarantees or representation of any kind or variety, whether expressed, implied or otherwise. Some items subject to prior sale and removal. PAYMENT: May be made by cash, certified funds or company check with a confirming letter of guarantee from an acceptable issuing bank. SAMPLE BANK LETTER: This bank guarantees payment to GoIndustry DoveBid from (name of customer) on account # up to the amount of $. This letter is valid for purchases at the Talhin/T Corporation on Tuesday, November 9th. American Express, Visa, and MasterCard will be accepted for this sale. BUYERS PREMIUM: A discounted buyer s premium of 16% of the bid price will be added to the bid price for each lot for buyers who pay in the form of cash, cashier's check, company check (with a letter of guarantee) or wire transfer; the full buyer s premium of 18% shall apply for buyers who pay via credit card. REMOVAL: Small items must be removed by Friday, November 12th. All other items must be removed by Friday, November 26th. For complete Terms of Sale, visit our website at Downtown: Caesars Windsor Hotel & Casino 377 Riverside Drive East Windsor, Ontario N9A 7H7 (800) GoIndustry Dove Bid Appraisal Services: GoIndustry DoveBid s professional appraisal department values machinery, equipment and inventory throughout the world. From small quantities to multiple plants, our large accredited staff is available to service your appraisal needs. USPAP compliant and accepted by major financial institutions. Executive Office: (800) Call today for a no obligation quote. By Order of Court Appointed Trustee Talhin/T Corporation Live/Webcast Auction LATE MODEL CNC INJECTION MOLDING FACILITY -OVER 750 LOTS! BRYAN GOODMAN Tel: (410) ext bryan.goodman@go-dove.com