WEir Oil & Gas. Excellent Oil & Gas Solutions

Transcription

1 WEir Products & Services

2 Pressure Pumping Systems SPM Products Design Features and Benefits Can be applied to all existing SPM fluid end designs A combination of optimized geometry, improved manufacturing processes and alternative materials resulted in patentpending technology that is designed to improve the life of conventional SPM fluid ends. Reduces cost of ownership over pump life Reduces capital outlay in fluid end inventory Increases frac pump efficiency and utilization Utilization of readily available existing fluid end materials When used with proprietary stainless steel, delivers up to 5x the life of conventional SPM fluid ends SPM Duralast Fluid End Technology Conventional technology The Duralast technology has been engineered to double the life of conventional SPM fluid ends without the need to change fluid end material. It optimizes all areas that can negatively impact fluid end life, including the suction conditions of the fluid end with the use of the Duralast suction stabilizer. High stress in critical areas Duralast technology was engineered to address the challenges of drilling deeper, horizontally and in harsher environments. This innovative technology helps to lower operational costs and increase productivity through its advanced design that improves fatigue life by more than 50% and reduces stress concentrations by more than 30%*; longer-lasting performance means less downtime and maintenance. Designed to reduce stress concen trations by more than 30% when compared to SPM fluid ends without the Duralast technology The Duralast suction stabilizer reduces the acceleration pressure losses found in the suction side of the fluid end, reducing the potential for fluid end cavitation. In addition, the Duralast suction stabilizer eliminates the need for a pulsation dampener in front of the suction manifold, in a package slightly larger than the zoomie-style manifold. The suction stabilizer was designed to be maintenance-free Duralast Stress reduction > 30% Low stress in critical areas WeirInAction.com WeirOilandGas.com Follow Us on Twitter Copyright S.P.M. Flow Control, Inc All rights reserved. SPM is a trademark and/or registered trademark of S.P.M. Flow Control, Inc.; DURALAST is a trademark of S.P.M. Flow Control, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. Certain features of the Duralast technology are protected worldwide by patents pending and registered in the name of S.P.M. Flow Control, Inc. * When compared to conventional SPM fluid ends that do not feature SPM Duralast technology. info@weiroilandgas.com

3 Pressure Pumping Systems SPM Products and easy to install into the existing footprint of the current manifold without the need to do any conversions to the frac unit. Available Options Duralast technology addresses the three fundamental root causes of fluid end failure: cracking in the cross bores, cracking in the valve seat deck and corrosion pitting. Field tested and proven in the harshest environments, Duralast fluid end technology is designed to be one of the longest lasting fluid ends of its type on the market. Its features are transferable to any SPM fluid end size or pump type. Suction manifold or suction stabilizer Stainless steel or carbon steel Nickle- or tungsten-coated plungers Discharge gauge port configuration Discharge flange configurations SPM Duralast fluid end technology is designed to reduce your operational expense. WeirInAction.com WeirOilandGas.com Follow Us on Twitter Copyright S.P.M. Flow Control, Inc All rights reserved. SPM is a trademark and/or registered trademark of S.P.M. Flow Control, Inc.; DURALAST is a trademark of S.P.M. Flow Control, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. Certain features of the Duralast technology are protected worldwide by patents pending and registered in the name of S.P.M. Flow Control, Inc. * When compared to conventional SPM fluid ends that do not feature SPM Duralast technology. info@weiroilandgas.com

4

5

6

7

8

9

10

11 Pressure Pumping SPM Products SPM 8 Station Manifold Skid with Safety Iron Connections The SPM Safety Iron 8 Station Manifold Skid provides users with a compact manifold system, utilizing the features of a manifold trailer in a more compact footprint for use in regions where transport of larger manifold trailers is challenging. The Manifold Skid can be easily transported and loaded/unloaded from a flatbed trailer utilizing a wench. The modular design of the skid, coupled with the high pressure iron mounted above the low pressure manifold greatly enhances the serviceability of the high pressure system during maintenance cycles. The lower profile of the high pressure iron also increases safety for the user as actuating the isolation valves can be achieved more efficiently. WeirInAction.com WeirOilandGas.com Follow Us on Twitter Copyright 2014, S.P.M. Flow Control, Inc.. All rights reserved. SPM and SAFETY IRON are trademarks and/or registered trademarks of S.P.M. Flow Control, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. *Certain features of the Manifold Skid technology are included in a patent pending in the name of S.P.M. Flow Control, Inc. High pressure system equipped with: 8 x 4 15K Safety Iron connections x female connections at stations (4 on each side) 2 x 4 15K Safety Iron connections x female connections on main outlets to well head

12 Pressure Pumping SPM Products WeirInAction.com WeirOilandGas.com Follow Us on Twitter Copyright 2014, S.P.M. Flow Control, Inc.. All rights reserved. SPM and SAFETY IRON are trademarks and/or registered trademarks of S.P.M. Flow Control, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. *Certain features of the Manifold Skid technology are included in a patent pending in the name of S.P.M. Flow Control, Inc.

13 Pressure Pumping Systems Weir Services Benefits Weir Division Headquarters A network of service centers located in proximity to major drilling operations means experienced technicians, with ready access to an inventory of pump part expendables, are close by and ready to respond to your needs quickly. Among the aftermarket services* available are: Fluid end repairs and rebuilds Pump repairs Weir Pressure Pumping Aftermarket Repair Services Offers Comprehensive and Extensive Expertise Reduce downtime and lower operating costs with Weir and its comprehensive portfolio of parts and rigorous repair services for all major OEMs. Weir offers extensive aftermarket parts, repairs and services to help maintain productive fracturing and well completion operations. With one of the most complete and comprehensive portfolio of processes and procedures, as well as replacement parts and expendables for SPM, Mesa and Novatech products, Weir offers solutions and expertise to prevent, or solve, the most critical equipment issues. Pump parts and accessories for cementing/acidizing and fracturing Full range of aftermarket products: Mesa plungers, Novatech valves and seats, SPM packing, SPM pump parts, SPM discharge frac hoses, SPM Gladiator line of water and slurry pumps Experienced Aftermarket Services team on call for all equipment and service needs Plunger refurbishment Cement head refurbishment Manifold inspection repair and testing Rental of the SPM Flow Line Safety Restraint (FSR) system, the industry s first engineered and most utilized restraint system designed to reduce the area of danger around high-pressure flow line disengagements *Not all services are available on-site. WeirInAction.com WeirOilandGas.com Follow Us on Twitter Copyright S.P.M. Flow Control, Inc All rights reserved. SPM is a trademark and/or registered trademark of S.P.M. Flow Control, Inc.; FLOW LINE SAFETY RESTRAINT is a trademark of S.P.M. Flow Control, Inc.; NOVATECH is a trademark and/or registered trademark of Novatech, LLC; MESA is a trademark of Mesa Manufacturing, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. Certain aspects of the SPM Flow Line Safety Restraint system referred to in this document are protected by patents pending and granted worldwide in the name of S.P.M. Flow Control, Inc. info@weiroilandgas.com

14 Pressure Pumping Systems Weir Services Weir Services Fluid End Repair Services Mesa Plungers Pump repair services are conducted by highly trained service technicians and include: Strip, inspection and overhaul of pump power ends Inspection and repair of power end lube system Novatech Valve Replacement Parts Fluid end strip, inspection and rebuild (with new expendable components) Fluid end repair* Inspection and repair of plunger lube systems Pump performance and load test Pump & Fluid End Repairs Refurbish, Repair or Replace Extending equipment life and maintaining operational efficiency for customers drives Weir Services and its commitment to offer several options for the maintenance and repair of pumps and fluid ends. Detailed failure analysis of failed components to understand root cause of failure Fluid End Repairs In certain instances, it is possible to repair fluid ends rather than scrap and replace them With our extensive service network, there is a Weir Services facility near you that can repair all makes and models of SPM well service pumps as well as many of our competitor s pumps. All replacement parts used in our repair are genuine SPM, Novatech or Mesa parts. Our process to repair corrosive and erosive wear, and/or cylinder cracks can help provide a cost-effective solution that extends the life of customers equipment This service is backed by the quality standards and guarantee that you would expect from one of the world s leading manufacturers of well service pumps. Our expert analysis includes a detailed inspection and examination process to assess the suitability of the fluid end for repair and further service Expendables Weir offers a range of quality expendable parts for a variety of well service pumps. From Mesa plungers to Novatech valves, seats and caged assemblies, Weir has expendables that cover almost all well service pumps and applications including workover, cementing, acidizing and fracturing. WeirInAction.com WeirOilandGas.com info@weiroilandgas.com Follow Us on Twitter The success of the fluid end repair services also involves utilizing the in-depth repair procedures, developed by the Weir Services engineering team Contact Weir Services for more information regarding its suite of pump and fluid end repair services. Copyright S.P.M. Flow Control, Inc All rights reserved. SPM is a trademark and/or registered trademark of S.P.M. Flow Control, Inc.; NOVATECH is a trademark and/or registered trademark of Novatech, LLC; MESA is a trademark of Mesa Manufacturing, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. Certain aspects of the pump casing offset discharge feature referred to in this document are protected by patents pending in the name of Weir Minerals Australia Ltd. * Fluid end repairs are not possible in all cases. info@weiroilandgas.com

15 Pressure Pumping SPM Products Spine Features E xtreme strength and reliability Flexible and lightweight Flow line piping Easy to install and maintain Rib Corrosion-resistant Applicable for both fluid and gas pumping operations Water-resistant options Main line Easy to transport Ongoing Weir support SPM Flow Line Safety Restraint System (FSR) Driven by Industry Need The SPM Flow Line Safety Restraint (FSR) System is one of the industry s most utilized restraint systems designed to reduce the area of danger around high-pressure flow line disengagements. For use on both onshore and offshore applications, operators and service companies have relied on the SPM FSR System to enhance safety during pumping operations. Product innovation, customer collaboration and a commitment to industry safety were the driving forces behind the development of this temporary flow line restraint product in How the SPM FSR Works The SPM FSR System utilizes interlocking synthetic loops strung along the length of the flow line, attached to critical points of the flow line through smaller loops. This assembly is then anchored to a substantial structural tie-down, such as the pumping unit or offshore rig structure. Ribs and spines of the system transmit separation forces to the anchor point and dissipate large amounts of energy over a longer period of time. WeirInAction.com WeirOilandGas.com Follow Us on Twitter Copyright 2014, S.P.M. Flow Control, Inc. All rights reserved. SPM is a trademark and/or registered trademark of S.P.M. Flow Control, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. Aspects of the SPMTM flow line safety restraint system described in this publication are protected by patents in the name of S.P.M. Flow Control, Inc. Certain aspects of the Flow Line Safety Restraint System are covered by one or more patents, including U.S. Patent No. 6,481,457. info@weiroilandgas.com

16 Pressure Pumping SPM Products Light, Medium and Heavy Duty SPM FSR Systems The SPM FSR System is available in three duty ratings Light Duty, Medium Duty and Heavy Duty. The system is flexible enough for a variety of flow line configurations and can be easily transported. All models are suitable for energized fluid, CO2 and nitrogen operations. Size and Pressure Ratings SPM FSR Rental Program STYLE Weir maintains a fleet of rental FSR units at its service centers around the globe for onsite delivery. The rental fleet undergoes rigorous inspection and recertification to ensure that all components are ready when needed and meet performance standards. Each component features identification and recertification badges that verify its compliance with regulations. Rental storage trailers are also available to store and organize the SPM FSR System and make transport of component parts safe and convenient. Proven Performance The SPM FSR System has been used in both onshore and offshore applications around the world since 2000 to increase safety during pumping operations. It has been tested and honored by the industry for its innovation and performance. Best Mechanical Engineering Innovation Award from the American Society of Mechanical Engineering in 2002 Mandated by several major E&P companies for use during pumping operations Accepted by WorkSafeBC (the Workers Compensation Board of British Columbia) as in compliance with a government mandate that flow line piping systems be anchored and restrained during well testing or stimulation operations Training and full service support available. NOMINAL IRON SIZE PRESSURE (PSI) Light Duty 2" 15,000 Medium Duty 2" 20,000 Heavy Duty 2" 20,000 Light Duty 3" 7,500 Medium Duty 3" 15,000 Heavy Duty 3" 15,000 Light Duty 4" 5,000 Medium Duty 4" 10,000 Heavy Duty 4" 15,000 These load ratings are valid for gas and liquids in both energized and non-energized services. Standard Temperature Rating Minimum: -30 C Maximum: 110 C A fleet of rental FSR units is maintained at Weir Oil & Gas service centers globally. WeirInAction.com WeirOilandGas.com Follow Us on Twitter Copyright 2014, S.P.M. Flow Control, Inc. All rights reserved. SPM is a trademark and/or registered trademark of S.P.M. Flow Control, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. Aspects of the SPMTM flow line safety restraint system described in this publication are protected by patents in the name of S.P.M. Flow Control, Inc. Certain aspects of the Flow Line Safety Restraint System are covered by one or more patents, including U.S. Patent No. 6,481,457. info@weiroilandgas.com

17 Pressure Pumping Systems SPM Products Optimized hydraulics Interchangeable with the majority of existing equipment in the field Oversized bearings Design Features and Benefits Robust shaft design Evolved from Weir s range of market-leading mining slurry pumps, which are designed for long-lasting performance to achieve low operating costs. Proprietary alloy designed to increase component wear life SPM Gladiator Slurry Pump We ve been on a mission to provide a better slurry solution for frac operations. Introducing the new SPM Gladiator slurry pump. Evolved from Weir s range of market-leading mining slurry pumps, it is manufactured with a proprietary alloy that has been proven in the world s harshest mining applications to significantly increase equipment life. Utilizes a proprietary Weir alloy, proven in aggressive mining applications globally Robust shaft and bearing design delivers superior mechanical reliability and life Designed to be interchangeable with the majority of existing equipment in the field Optimized hydraulics designed to reduce erosive wear The optimized hydraulics of the SPM Gladiator slurry pump reduces wear by preventing localized turbulence which contributes to erosive wear. Wear reduction is also achievable with a unique, patent-pending, casing offset discharge feature which gives better wear protection than a pump with a centerline discharge. This feature also keeps the connections more compact than on a pump with a tangential discharge. In addition, the pump s robust shaft and oversized bearings can reduce shaft deflection during operation, to extend the life of both the bearings and the mechanical seal. The pump s footprint makes it a direct replacement for the majority of equipment already existing in the field. The SPM Gladiator slurry pump has been designed to provide significant savings to the overall operational costs of customers. WeirInAction.com WeirOilandGas.com Follow Us on Twitter Copyright S.P.M. Flow Control, Inc All rights reserved. SPM is a trademark and/or registered trademark of S.P.M. Flow Control, Inc.; GLADIATOR is a trademark of S.P.M. Flow Control, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. Certain aspects of the pump casing offset discharge feature referred to in this document are protected by patents pending in the name of Weir Minerals Australia Ltd. info@weiroilandgas.com

18 Pressure Pumping Systems SPM Products Interchangeable with the majority of existing equipment in the field Seal oiler provides dry-run protection Design Features and Benefits Enhanced design features that protect the pump s mechanical seal, provide ease of maintenance, and allow for quick repairs to reduce downtime. Spiral-locking snap ring Optional mechanical seal oiler provides dry-run protection Back pull-out assembly enables ease of maintenance Combined bearing frame and bracket Back pull-out assembly SPM Gladiator Water Pump The SPM Gladiator Water Pump is engineered for performance and reliability in harsh frac applications. An optional seal oiler feature protects the pump mechanical seal with a supply of clean lubricating oil in the event that the pump breaks suction, or is run dry. Bearings locked in via spiral-locking snap rings to allow quick shaft removal for fast repair times Combined bearing frame and bracket delivers superior rigidity and durability Designed to be interchangeable with the majority of existing equipment in the field Low operating costs and minimal downtime through exceptional pump reliability and availability Its combined bearing frame and bracket provides enhanced rigidity and strength, while the back pull-out assembly allows for ease of maintenance. Quick shaft removal is achievable using spiral-locking snap rings to secure the bearings (instead of shoulders) for fast repair times. Designed to be a drop-in replacement for the majority of existing equipment in the field, the SPM Gladiator Water Pump has been designed to lower customers operational costs through improved pump reliability and through a reduction in repair times. WeirInAction.com WeirOilandGas.com Follow Us on Twitter Copyright S.P.M. Flow Control, Inc All rights reserved. SPM and GLADIATOR are trademarks of S.P.M. Flow Control, Inc.; WEIR is a trademark of Weir Engineering Services Limited. info@weiroilandgas.com

19 Pressure Pumping Systems SPM Products 273,000-lbs maximum rod load Design Features and Benefits Thru fluid end stay rods High horsepower and advanced patentpending fluid end technology designed to deliver robust performance and low operating costs. 2,800-rated horsepower (BHP) Duralast fluid end technology 10" stroke for high flow output SPM Destiny QWS 2800 Frac Pump The SPM Destiny QWS 2800 Frac Pump is introduced with the latest patent-pending Duralast fluid end technology designed to double the life of SPM fluid ends.* With 2,800-rated input BHP and 273,000-lbs maximum rod load rating, this Destiny QWS pump is ready for harsh pumping applications. A 10" stroke delivers higher flow output and improved overall pump operation when compared to an 8" stroke equivalent pump. Duralast fluid end technology is designed to double the life of SPM fluid ends* Power end technology designed for harsh pumping applications with 2,800-rated input BHP and 273,000-lbs maximum rod load rating High flow output via 10" stroke for reduced cycles and improved operation Designed to achieve lower operating costs Supported through Weir Services global footprint The SPM Destiny QWS 2800 Frac Pump has a one-piece stay rod design which connects the fluid end directly to the power frame for enhanced durability and operation. The high horsepower rating, coupled with the pump s output capability, means less units onsite, reducing operating costs. The combination of Duralast fluid end technology with the reliability of the SPM Destiny QWS 2800 pump s enhanced power end, makes this pump well-positioned to deliver low operating costs. WeirInAction.com WeirOilandGas.com Follow Us on Twitter Copyright S.P.M. Flow Control, Inc All rights reserved. SPM, DESTINY, and DURALAST are trademarks and/or registered trademarks of S.P.M. Flow Control, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. The technology incorporated in the SPM DuralastTM fluid ends is the subject of patents pending in the name of S.P.M. Flow Control, Inc. This technology is covered by one or more patents, including U.S. Patent Nos. 8,668,470; 8,662,864; 8,662,865; D679,292; D679,293; and D691,180. * When compared to conventional SPM fluid ends that do not feature DuralastTM technology. info@weiroilandgas.com

20 Pressure Pumping Systems SPM Products Pump Performance Operating Range Maximum brake horsepower input 2,800 BHP Maximum rod load capacity 273,000 LBf Stroke length 10 IN Gear ratio 6.933:1 Approximate length 92 IN Approximate width 120 IN Approximate height 44 IN Approximate weight (dry, with suction manifold) 20,592 LB SPM Destiny QWS 2800 Frac Pump Performance Data 1,2 DISPLACEMENT AT PUMP STROKES PER MINUTE/PINION RPM PLUNGER DISPLACE DIAMETER PER REV IN GAL/REV (MM) (LITER/REV) GPM PSI GPM PSI GPM PSI GPM PSI GPM PSI GPM 1948 PSI (LPM) (KG/SQ CM) (LPM) (KG/SQ CM) (LPM) (KG/SQ CM) (LPM) (KG/SQ CM) (LPM) (KG/SQ CM) (LPM) (KG/SQ CM) 4 (101.6) 2.72 (10.3) 136 (515) (1531) 204 (772) (1492) 261 (988) (1167) 408 (1544) (746) 544 (2059) 7940 (560) 764 (2893) 5651 (398) 4 1/2 (114.3) 3.44 (13.0) 172 (651) (1210) 258 (977) (1179) 330 (1250) (922) 516 (1954) 8365 (589) 688 (2606) 6273 (442) 967 (3661) 4465 (315) 5 (127) 4.25 (16.1) 212 (804) (980) 319 (1206) (955) 408 (1543) (747) 637 (2413) 6775 (477) 850 (3217) 5082 (358) 1194 (4520) 3617 (255) 1900 (1415) 2800 (2090) 2800 (2090) 2800 (2090) 2800 (2090) 2800 (2090) INPUT POWER: BHP (KW) 1 Based on 90% ME and 100% VE Intermittent Service Only. 2 Pumps with pressures in excess of 15,000 PSI require special gauge and discharge flanges. Contact Weir Engineering for information. Full Rod Load Full BHP SPM Destiny QWS Hydraulic Horsepower Curve PLUNGER SIZE inch ½ inch 4 inch PRESSURE (PSI) FLOW (GPM) WeirInAction.com WeirOilandGas.com Follow Us on Twitter Copyright S.P.M. Flow Control, Inc All rights reserved. SPM, DESTINY, and DURALAST are trademarks and/or registered trademarks of S.P.M. Flow Control, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. The technology incorporated in the SPM DuralastTM fluid ends is the subject of patents pending in the name of S.P.M. Flow Control, Inc. This technology is covered by one or more patents, including U.S. Patent Nos. 8,668,470; 8,662,864; 8,662,865; D679,292; D679,293; and D691,180. * When compared to conventional SPM fluid ends that do not feature DuralastTM technology. info@weiroilandgas.com

21 Pressure Pumping Systems SPM Products Exterior Design Features 1. Multiple actuator options available 2. Dual side-entry grease ports 3. SPM hammer u nion or SPM Safety Iron connections 1 Design Features and Benefits 2 Dual static face seals incorporate a self-energizing design to allow for proper sealing in both low- and high-pressure applications 3 1 Interior Design Features 1. Free-floating plug Self-energizing face seals 3. Enhanced internal geometry Next Generation SPM Plug Valve (Patents Pending) Weir will soon introduce the next generation SPM plug valve for use in a variety of well service applications. Its robust, forged body and enhanced internal geometry reduces flow turbulence and pressure drop in rated working pressures up to 15,000 psi. The next generation SPM plug valve will be available in 3 or , and sizes, and offered with either SPM hammer union or SPM Safety Iron end connections. Available with manual, wheel or hydraulic actuators, the SPM plug valve is designed to provide longer life, reliable service and lower overall cost of field operations. Free-floating plug design provides reliable, adjustment-free operations Proprietary preloaded seal segments ensure initial seal between dynamic seal surfaces to eliminate sand trapping and decrease washouts Dual grease ports on each side offer easy access, uniform grease distribution and short maintenance times Enhanced internal geometry for mitigation of erosion damage Robust, forged body and high-strength alloy steel pressure-bearing components provide long life Simplified assembly and easy field serviceability WeirInAction.com WeirOilandGas.com Follow Us on Twitter Copyright 2013 S.P.M. Flow Control, Inc.. All rights reserved. SPM and SAFETY IRON are trademarks and/or registered trademarks of S.P.M. Flow Control, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. Certain aspects of the SPM plug valve are protected by patents pending in the name of S.P.M. Flow Control, Inc. info@weiroilandgas.com

22 Pressure Pumping Systems Novatech Products Benefits Low cost and superior performance Urethane is poured directly around machined serrations to anchor the insert to the valve Process adds no additional stresses to the insert Weir Novatech Leads the Way in Full Open Valve and Seat Technology Design innovation has been the driving force for Weir Novatech and its rigid full open valve and seat technologies available for all major well service pumps. Novatech valves are manufactured by combining the advantages of a forged alloy steel upper body to assure impact strength, with the advantages of precision casting to minimize flow restrictions and fluid turbulence. Additionally, the full open seat technology maintains a uniform contact area to eliminate premature washouts and extend the life of fluid ends. Key to its performance is Weir Novatech s patented Cast-N-Place insert design that locks it in place and eliminates stress by molding the insert around the serrations to assure quick sealing with the seat. Novatech Cast-N-Place inserts offer significant advantages over traditional replacement valves and bonded insert valves including cost-effectiveness, a molding process that locks it in place and increased abrasion and extrusion resistance for longer valve life. Increased resistance to abrasion and extrusion Eliminates insert movement, leakage and separation from valve Manufactured as a one-piece valve body for enhanced strength over those with an independent retainer plate Valve Testing Novatech pump valves and seats are manufactured to rigid quality control standards that include: CNC machining for exact dimensional tolerance control; heat-treat carburizing with a deep hardwear case; full metallurgical laboratory tests on every furnace load; and seat tapers that are 100% gauge inspected to meet pump manufacturer s exact dimensional specifications. Visit the website for a complete product catalog of Novatech pump valves and seats. WeirInAction.com WeirOilandGas.com Follow Us on Twitter Copyright S.P.M. Flow Control, Inc All rights reserved. NOVATECH is a trademark and/or registered trademark of Novatech, LLC; CAST-N-PLACE is a trademark of Novatech, LLC; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. Certain aspects of the Cast-N-PlaceTM feature referred to in this document are protected by patents pending and granted in the name of Novatech, LLC info@weiroilandgas.com

23 Pressure Pumping Systems Mesa Products and Services Benefits Designed to lower operating costs Extend pump availability Numerous brands and models reworked High-quality service Quick turnaround Mesa Plungers and Repair Services Leading the industry in the design, manufacture and rework of plungers, Weir Oil & Gas offers 383 different plungers engineered to fit almost all pumps from any manufacturer. The Mesa Nickel-based Plunger is well-known in the market for its performance and the new Mesa Tungsten Plunger has had great success in the field to date. Engineered to operate for extended periods when compared to traditional Mesa plungers, this new plunger can assist customers with reducing their operating costs through increased reliability and availability of equipment. Weir also offers Mesa pump plunger rework services through the Weir network of service centers. A wide variety of plunger styles can be reworked and returned back to Weir specifications on critical dimensions. WeirInAction.com WeirOilandGas.com Follow Us on Twitter Copyright 2014, S.P.M. Flow Control, Inc.. All rights reserved. MESA is a trademark of Mesa Manufacturing, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. info@weiroilandgas.com

24 Pressure Control Systems Seaboard Products Design Features Metal-to-Metal Seals Utilized in the gate/seat, body/bonnet and stem/bonnet backseat Selective Backseat Provides proven safety during venting, lubrication and stem packing replacement Backseat can be employed without shifting gate position Floating Seats Allows bi-directional use Requires no lubrication to seal Threaded Packing Gland Accommodates replacement of bearings and shear pin at full-pressure differential Seaboard Model 1640RS Gate Valve The Seaboard Model 1640RS gate valve is engineered for demanding frac operations environments. Designed with a forged body, bi-directional slab gate, pressure balancing stem, metal-to-metal sealing technology and stem back-seating capability, the Seaboard Model 1640RS gate valve s design has been rigorously field-tested to maintain the highest standards of quality. The one-piece slab gate s floating seats use line pressure to supply the sealing force. Stem packing is chemically inert, using spring energizing rings that require no adjustment or plastic injection. The Model 1640RS valve is available to suit most types of oil and gas service in either ballscrew operated or hydraulically actuated models. The ballscrew is a low torque design with a maximum of 17 turns for full actuation. SIZE PRESSURE No Body Penetrations A single lubrication injection port is located outboard of the backseat in each bonnet allowing cavity lubrication or venting of trapped pressure after backseat operation Benefits Provides smooth operation during extreme thermal cycles Easily closed with minimal force resulting in elimination of potential valve cavity pressure lock Easy to maintain in-line without the use of special tools Stem packing can be replaced while the valve is under pressure TURNS TO OPERATE 4 1/16 in. 15m 11 turns 5 1/8 in. 10m and 15m 14 turns 7 1/16 in. 10m and 15m 17 turns WeirInAction.com WeirOilandGas.com Follow Us on Twitter Other sizes / options available upon request Copyright 2013 Seaboard International, Inc. All rights reserved. SEABOARD is a trademark of Seaboard International, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. info@weiroilandgas.com

25 Pressure Control Systems Mathena Products Design Features and Benefits First drive-over in the industry with a patent-pending, triple-capacity design to provide three separate enclosures for power, water and communication utility lines Easy installation that significantly reduces front-yard set-up time and costs An Industry-first Product Low-profile design with no hard edges allows access for all vehicles Proven durable performance under even the heaviest cranes A ssembles in any 20-foot combination to accommodate multi-lane traffic Mathena Utility Drive-Over: a Better Drill Site Entrance Decreases drilling site preparation time by eliminating the need to dig trenches or form berms Superior level of protection eliminates downtime related to damaged utility lines Our service technicians in the field knew there had to be a better way to set utilities at a new drill site in a safe, efficient and thorough manner. They were right. Introducing the industry s first triple-capacity drive-over that provides secure conduits for power, communications and water utilities. The patent-pending Mathena utility drive-over eliminates the time-consuming task of digging trenches to bury utility lines at the front yard of a drilling location. Reducing the time and cost to prepare site entrances, the Mathena utility drive-over lays flat across the ground to prevent line damage and holds up under the weight of the heaviest industrial equipment, including cranes accessing the site. Rugged, durable design The welded steel construction and durable structural design of the Mathena utility drive-over contains three different compartments that keep data transmission cables from the power cables to enhance safety. It can also support a 4-inch water line. The design ensures the individual integrity of the electrical conduit, plugs, water lines and communication cables. With a length of 20 feet, it can interconnect to provide up to 80 feet of continuous site access and line protection. Eliminates line damage and line burial WeirInAction.com WeirOilandGas.com Copyright S.P.M. Flow Control, Inc All rights reserved. MATHENA is a trademark and/or registered trademark of Mathena, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Ltd. Certain features of the MATHENA utility drive-over product featured in this document are protected by patents pending in the name of Mathena, Inc. sales@mathena-inc.com

26 Pressure Control Systems Seaboard Products Benefits Enhances safety trained technicians connect pressure control system and monitor through each stage of the process; single rig-up by trained technicians reduces likelihood of related incidents Saves time significant completions cost savings; numerous wells can be hydraulically fractured during the same operation decreasing the average time on the well site Seaboard Zip Pac Delivers Service and Efficiency SM Features Equipped with both hydraulic and manually operated valves The efficiencies gained by pad drilling are multiplied when frac operations utilize zipper manifold technologies. Zip Pac takes zipper frac manifold technology and pairs it with qualified technicians to create a package that enhances safety, saves time and money. Configured to allow for rapid rig-up on location SM Fully inspected and recertified after every job Trained technicians will bring the Zip Pac to location once drilling is completed. On location, they will connect up to two wells to each pressure pumping manifold. Set-up time is minimized as the team is skilled in safely rigging the interconnect piping and safety restraints from the well to the manifold. Once frac operations begin, the team proactively manages each step to frac the wells in one systematic process, which can result in significant savings of completions costs. SM Design Specifications Bore size Maximum wellhead working pressure Maximum temperature rating (API) Customizable equipment configurations to meet individual well/pad site requirements are tactically configured to maximize output 7 in. 5 in. 4 in in in in. 10M psi or 15M psi 10M psi or 15M psi 10M psi or 15M psi Product specification level Well configurations PU PU PU PSL-3 PSL-3 PSL WeirInAction.com WeirOilandGas.com Copyright 2013 Seaboard International, Inc. All rights reserved. SEABOARD and ZIP PAC are trademarks of Seaboard International, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. info@weirseaboard.com

27 Pressure Control Systems Seaboard Products Benefits and Features 24/7 monitoring by rigorously trained and certified specialists Enhances safety and helps control the potential of over-pressure situations Customized to specific needs Mobile service with equipment stored in a travel trailer Dual-choke manifolds Flowline package with connections and companion flanges Seaboard Frac Watch Service Keeps Pressure in Check SM Communications package with signal booster Specifications 2 in M Dual Choke Manifold (9 valve) Fracturing of horizontal wells is a combination of multiple successive operations that must be coordinated and executed to critical standards. Flowback is a vital part of the process and in some ways, more risk-intensive than pressure pumping. Weir offers the Seaboard Frac Watch service to monitor well pressures during hydraulic fracturing and support successful operations. A team of highly trained flowback service technicians is available 24/7 to keep a watchful eye on operations and respond quickly with quality Seaboard flowback equipment when needed. Necessary equipment has been tested and certified prior to delivery on site for responsive service. SM WeirInAction.com WeirOilandGas.com Copyright 2013 Seaboard International, Inc. All rights reserved. SEABOARD and FRAC WATCH are trademarks of Seaboard International, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. info@weirseaboard.com

28 Pressure Control Systems Seaboard Products Services Benefits and Features Choke manifold Qualified, trained specialists monitor the entire process 24/7 responsive service Erosion mitigation program Communications package Choke Manifold Benefits and Features Choke manifolds are equipped with two hydraulic chokes for continuous flow Plug catcher Plug valves securely isolate and redirect flow Seaboard Drill-Out Control Service Provides Onsite Expertise SM An important phase after plug and perf operations is the removal of plugs. Drilling out the plugs demands downhole pressure control and the expertise to assure that debris is safely collected at the surface. Rely on the Seaboard Drill-Out Control service to help accelerate the drill-out process and maximize production rate. All of Seaboard s equipment used during drill-out operations is tested and accompanied by a team of technical experts who monitor and control pressure levels during the entire plug and perf process (drilling out the plugs with coiled tubing). Whether drilling composite or cast-iron frac plugs, the Seaboard Drill-Out Control service provides pressure monitoring and responsive service to maintain safe and efficient operations. SM SM Additionally, the Seaboard drill-out manifold designed with dual-isolation plug valves on either side allows operators to perform maintenance and repairs on the chokes with no interruption of the flow rate. Choke Manifold Specifications 3 in M Dual Choke Drill-out Manifold (4 valve) Hydraulic or Manual 2 in M Dual Choke Manifold (9 valve) Plug Catcher Benefits and Features Ability to switch flow from one side to the other Ability to pull screens to view returns Plug Catcher Specifications 3 in M Dual Screen Plug Catcher with 7 in. barrel with 3 in. I.D. screen WeirInAction.com WeirOilandGas.com Copyright 2013 Seaboard International, Inc. All rights reserved. SEABOARD and DRILL-OUT CONTROL are trademarks of Seaboard International, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. info@weirseaboard.com

29 Pressure Control Systems Seaboard Products Benefits Cost-effective option for managing capital expenditures Minimal repairs Support services including crane trucks and torque units Full hydrostatic testing Flexibility with all standard sizes ranging from in. 10M to in. 15M Seaboard Frac Tree Rental Equipment Program Delivers Cost-Effective and Service Weir Seaboard offers rental of frac trees and support equipment to meet high-performance drilling and production needs, while managing operators capital expenditures. The program includes a full complement of associated equipment and services for per-day or campaign rentals. Service Under Pressure Weir Seaboard built its reputation on providing excellent customer service including field and office support, quotes and drawings all available when you need them. Field service includes installation, onsite testing, maintenance, removal and refurbishment. To reduce set-up time, crane trucks with sufficient reach and capacity are used to lift and assemble the frac trees. Torque and testing services are also available. Everything needed to get the job done. Seaboard equipment undergoes a rigorous inspection and quality assurance program so that operations can move forward with confidence. Customers can reduce inventory in a way that is convenient and affordable without reducing production potential. WeirInAction.com WeirOilandGas.com Follow Us on Twitter Copyright 2013 Seaboard International, Inc. All rights reserved. SEABOARD and SERVICE UNDER PRESSURE are trademarks of Seaboard International, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited info@weiroilandgas.com

30 Pressure Control Systems Mathena Products Key Benefits Pressure-balanced choke plug enables smooth opening and locking action Easy, hassle-free maintenance with interchangeable parts Quick and easy inspection and replacement of trim while choke is in-line E xcellent wear resistance with satellite nose overlay Withstands operating temperatures from minus 50 F to more than 350 F Digital gauge option Mathena Hydraulic Drilling Choke Provides Maximum Service, Minimum Maintenance Multiple configuration options: single or dual remote panel in a 10,000 psi or a 15,000 psi kit Visit the website for more information about the entire line of quality Mathena rental pressure control equipment and Weir. The advanced plug and seat design of the Mathena Hydraulic Drilling Choke provides positive metal-to-metal closure, even after extended use, allowing you to keep it working longer. High-pressure stainless steel tubing is used throughout the system to ensure safe operation. In addition, this drilling choke provides greater trim life because all major wear parts are made of heavy-duty tungsten carbide, including the plug, seat and downstream wear sleeve. An oilfield-rugged control console provides precise control of one or more chokes from the rig floor. The Mathena Hydraulic Drilling Choke was designed to make operations easier. It is available in the following sizes and is comprised of standardized parts for maximum flexibility inch flange choke for working pressures from 10,000 psi to 15,000 psi WeirInAction.com WeirOilandGas.com Copyright S.P.M. Flow Control, Inc All rights reserved. MATHENA is a trademark and/or registered trademark of Mathena, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Ltd. sales@mathena-inc.com

31 Pressure Control Systems Seaboard Products Benefits Faster and safer than many conventional surface wellhead systems Comprehensive product line offering off the shelf or customized solutions Reliability and performance in major oil and gas locations and conditions Proven technology over three decades of use Features Seaboard SMB-22 Multi-Bowl Wellhead System Saves Space, Time and Costs The Seaboard SMB-22 multi-bowl wellhead system is designed to decrease the time and cost associated with surface drilling and production by containing multiple strings of casing suspended within one wellhead. Because installing and removing the blow-out-preventor (BOP) stack is a timeconsuming procedure necessary whenever a conventional head or spool is added during operations, the SMB-22 multi-bowl decreases the number of times the BOP connection is broken, which eliminates downtime or non-productive time (NPT). The SMB-22 multi-bowl wellhead assembly is a full-bore design. The lower casing hanger is fluted to allow ample bypass for circulating mud and cement. The seal assembly, which lands on the flutes, also acts as a support for the upper hanger. A wide choice of tubing hanger designs is available for various service conditions. Ability to suspend multiple strings of casing or tubing within one wellhead system Lower casing hanger is fluted to allow ample bypass for circulating mud and cement Conductor hanger seals may be re-energized, if necessary Conductor hanger may be tested externally once landed Surface casing hanger may be landed prior to cementing, eliminating the need to reciprocate Annular seal for surface casing hanger may be re-energized, if necessary All running/retrieving tools run on casing Emergency suspension systems are available for the lower hanger No welding required Being able to suspend multiple strings within one wellhead decreases the size, making it a preferred solution where there are concerns about limited space and time. Weir Seaboard provides a wide range of multi-bowl systems for the most common or challenging applications. WeirInAction.com WeirOilandGas.com Copyright 2013 Seaboard International, Inc. All rights reserved. SEABOARD is a trademark of Seaboard International, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. info@weirseaboard.com

32 Pressure Control Systems Seaboard Products Features Metal-to-Metal Seals Seals are stable, thermally insensitive and environmentally resistant Utilized in the gate/seat, body/bonnet and stem/bonnet backseat Selective Backseat Provides proven safety during venting, lubrication and stem packing replacement Seaboard Model 1540S Gate Valve Provides Dependable Performance The Seaboard Model 1540S gate valve is recommended for applications up to 20,000 psi working pressure. Designed with rigorous quality control, it has a forged body, bi-directional slab gate, pressure balancing stem, metal-to-metal sealing tech nology and stem back-seating capability. The one-piece slab gate s floating seats use line pressure to supply the sealing force. Stem packing is chemically inert, using spring energizing rings that require no adjustment or plastic injection. The Model 1540S valve is available to suit most types of oil and gas service. Flanged-end configurations are available in standard bore sizes. Benefits Provides smooth operation during extreme thermal cycles Easily closed with minimal force resulting in elimination of potential valve cavity pressure lock Easy to maintain in-line without the use of special tools Stem packing can be replaced while the valve is under pressure WeirInAction.com WeirOilandGas.com Copyright 2013 Seaboard International, Inc. All rights reserved. SEABOARD is a trademark of Seaboard International, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Limited. A positive stop in the bearing cap that controls stem travel prevents premature backseating Backseat can be employed without shifting gate position Floating Seats Allows bi-directional use Spring-energized seals pre-load seats to maintain constant contact with gate, ensuring low-pressure sealing Requires no lubrication to seal Threaded Packing Gland Transfers stem-packing loads to the bonnet, protecting the bearing assemblies Accommodates replacement of bearings and shear pin at full-pressure differential No Body Penetrations A single lubrication injection port is located outboard of the backseat in each bonnet allowing cavity lubrication or venting of trapped pressure after backseat operation info@weirseaboard.com

33 Weir Products and Services Rubber traceability Multiple set screws and end ring design prevents extrusion Elastomer compound Stampede Swellable Packers Stampede Swellable Packers are designed for applications where simplicity, reliability and integrity are required. Made from proprietary, high-quality elastomers that are critical to the life of the packer and the performance of the well, each packer element can be traced back to individual batches of rubber to determine the date of manufacture. The packers incorporate a multiple set screw and end ring design, which is bonded to the rubber element, helping to prevent extrusion during application. Stampede Swellable Packers are manufactured utilizing enhanced fabrication and machining processes to provide confidence and assurance that the packer makes it to the well bottom, enhancing operational efficiency. Swell packers operate with less complexity and are generally more cost effective Design Features and Benefits Proprietary elastomer compound provides predictable swell when in contact with well fluids and with changes in temperature. Robust end ring design, with multiple set screws, protects the rubber during run-in, and provides a barrier against extrusion Elastomer is vulcanized to the base pipe, allowing the packer to have one effective annular seal Product readily available globally Available Options STAMPEDE Swellable Packers Standard Water Swell (SSW) Series STAMPEDE Swellable Packers High Salinity Water Swell (SHSW) Series STAMPEDE Swellable Packers Hybrid Oil and Water Swell (SHYB) Series STAMPEDE Swellable Packers Stampede Sleeve (SSLV) Series STAMPEDE Swellable Packers Standard Oil Swell (SSO) Series Visit the Stampede page on weirinaction.com than traditional inflatable packers. With product readily available in North America, Stampede Swellable Packers are ready when you need them. WeirInAction.com WeirOilandGas.com Copyright 2014, S.P.M. Flow Control, Inc. All rights reserved. STAMPEDE is a trademark and/or registered trademark of S.P.M. Flow Control, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Ltd. info@weiroilandgas.com

34 Weir Products and Services Capabilities Turn Key Prototypes Molding excellence Compounding experience Mold design and fabrication Engineering excellence Element Elastomer Compounds Stampede packer elements NBR HNBR Stampede Packer Elements are Made of High-quality Elastomers that can Withstand Unpredictable Environments Weir brings more than 25 years of experience in high-performance rubber compounds to the oil field industry. We provide competitive products and services to match individual needs and requirements. With several sizes and durometers to choose from, Stampede elements can be used in a variety of situations. Element selection and elastomer composition are critical to the life of the tool and performance of the well. The elements, when properly used, provide the necessary seal for isolation. The elements are manufactured using industry standard molding and preparation methods with traceability to each batch of rubber and the date the element was molded. Fluoroelastomer Durometer Stampede Packer Elements (NBR) SIZE E# DESCRIPTION 4½" ( #) E5 End Element 90D 4½" ( #) E6 Center Element 80D 5½" (14 17#) E2 End Element 90D 5½" (14 17#) E1 Center Element 70D 7" (20 29#) E3 End Element 90D 7" (20 29#) E4 Center Element 70D 75 8" (33 39#) E8 End Element 90D 7 " (33 39#) E7 Center Element 70D 58 WeirInAction.com WeirOilandGas.com Copyright 2013, S.P.M. Flow Control, Inc.. All rights reserved. STAMPEDE is a trademark and/or registered trademark of S.P.M. Flow Control, Inc.; WEIR is a trademark and/or registered trademark of Weir Engineering Services Ltd. Weir Minerals Linatex Salt Lake City 3459 South 700 West Salt Lake City, Utah info@weiroilandgas.com

35 Weir Products and Services Benefits Prevents overfilling Prevents fuel spillage and waste Removes the risk of tank rupture due to pressure build-up during and after filling Minimizes the risk of fire as a result of fuel spills Reduces costs associated with fuel waste and equipment damage Multiflo Hydrau-Flo Fuel-Filling Valve System Improves safety and environmental outcomes Provides ground-level refueling Hydrau-Flo Safety for Liquid Filling The Multiflo Hydrau-Flo valve system utilizes patented technology to deliver a safer, cleaner and more reliable fuel-filling valve arrangement for the oil and gas industry. It effectively removes the risk of overfilling, spills and tank rupture while minimizing safety and environmental hazards associated with fuel transfer. Eliminating waste provides a cost-saving advantage. With high-pressure flow rates of up to 270 gallons per minute, every second of spillage equates to more than 15 liters of waste. The Multiflo Hydrau-Flo fuel-filling valve system overcomes that problem without the need for electronics or complex arrangements that can block and fail. The Multiflo Hydrau-Flo valve system incorporates robust fuel-filler safety valves and float control valves to provide a reliable, hydraulically operated system that depends on fluid level, rather than pressure. It is available in three configurations to accommodate various equipment and applications. WeirInAction.com WeirOilandGas.com Follow Us on Twitter Copyright 2013 The Weir Group PLC all rights reserved info@weiroilandgas.com

36 Weir Minerals Products and Services Minerals Robust and rigid one-piece bearing frame ensures better component alignment One-point front liner adjustment to minimize front impeller gap to reduce wear and maintain performance Benefits Longer liner wear life Longer bearing life Less power usage New patented vanelet and four-vane impeller design to streamline slurry flow Less water consumption Reduced maintenance time Enhanced safety Superior hydraulic performance WARMAN WBH Centrifugal Slurry Pumps Vibration reduction Longer seal life There would be few people involved in slurry pumping who wouldn t be familiar with the Warman AH slurry pump and the many innovative enhancements and material improvements which Weir Minerals has developed to meet the productivity and cost demands of customers in all types of operating environments. This development has extended over four decades, providing Weir Minerals with a vast knowledge bank in slurry pumping technology. So, by putting our heads together on a global basis, by understanding the needs of customers today and by the aid of Computational Fluid Dynamics design, Weir Minerals has created the ultimate slurry pump one that gives you greater control over the performance and maintenance of your pump, reducing costs and keeping production running. WeirMinerals.com WeirInAction.com Follow Us on Twitter Copyright 2013 Weir Slurry Group, Inc. All rights reserved. WARMAN, WBH and AH are registered trademarks of Weir Minerals Australia, Ltd. The Warman WBH slurry pump is protected by pending patent and design registrations worldwide. WEIR is a registered trademark of Weir Engineering Services Limited sales.uk@weirminerals.com

37 Weir Products and Services Applications Production ASME cast choke valve API choke valve with forged body and bonnet Water injection Gas injection and gas lift Chemical injection Fracturing clean up High-pressure drops Multi-phase flows Flaring Pump discharge Overboard dump applications Methanol injection Weir Severe Service Choke Valves Weir severe service choke valves are designed and manufactured to meet the requirements of API and ASME specifications. Through the Blakeborough heritage brand of choke valves, Weir has been meeting the requirements of choke applications in a variety of challenging applications. Offering cast, forged or hipped body options, the valves are engineered with streamlined flow passages and anti-clogging features. Pressure Ratings ASME 150 ASME 4,500 lb API 2,000 15,000 PSI Available Body Sizes ASME 1" 24" API 1" 16" Design Features Available End Connections Flexible trim designs for specific applications Flanged/RF/RTJ/Hubbed Non-collapsible trim (brickstopper) Available Actuation Bolted, clamped or screwed bonnet Linear pneumatic/hydraulic Tough carbide trims Pneumatic/hydraulic/stepping X-Stream severe service trim Manual Top entry bonnet offers access to service without removal Electric Sand erosion-resistant trim Compliance Low noise and anti-cavitation trim NORSOK and NACE Easy service trim with no bolted components Wide range of end connections Metallic scraper rings WeirInAction.com WeirOilandGas.com info@weiroilandgas.com Follow Us on Twitter Copyright 2013 The Weir Group PLC all rights reserved info@weiroilandgas.com

38 Weir Products and Services API Monogram Licenses Oilfield Products: API 5CT Casing and Tubing Elements Manufacture of casing or tubing pup joints Manufacture of casing or tubing couplings Manufacture of accessories Threader API 7-1 Rotary Drill Stem Elements Drill stem subs Drill collars Threading for rotaryshouldered connections API-licensed Oilfield Equipment Weir Services manufactures a complete range of oilfield components to suit customer requirements fully certified in accordance with API Monogram Licences. Facilities offer fully equipped machine shops that permit a wide range of engineering components to be repaired, modified or manufactured. Our modern equipment includes medium and large center lathes, horizontal and vertical boring machines, radial arm drilling machines, milling and cylindrical/surface grinders. The latest CNC lathes and vertical machining centers permit batch or production runs of complex products to be undertaken at competitive rates and to suit tight delivery schedules. To support the service facilities, Weir stocks a vast range of forged materials and thick wall pipes for the manufacture of API flanges, spools, double-studded adaptors, mud crosses and crossovers, etc. As a result of this stocking strategy, equipment can be rapidly manufactured and delivered to meet our customers urgent requirements. All items are fully inspected and tested prior to dispatch and can be supplied suitable for standard or H2S service. Benefits Equipment designed and manufactured by Weir Services, as per internationally recognized API Standards Reduced manufacturing costs through stocking strategy, operational efficiencies and worldwide Weir economies of scale API 6A Loose Connectors Crossover connectors Top connectors Tees and crosses Adaptor and spacer spools Flanged connectors Threaded connectors Other end connectors at PSL 1 through 3 Bullplugs (PSL not applicable) Valve removal plugs (PSL not applicable) Drill stem subs API 16A Drill-thru Connectors Drilling spools Adaptors Loose connections API 16C Choke and Kill Manifolds and Rigid Lines Rigid choke and kill lines Choke and kill manifold assemblies API 16D BOP Control Systems and Associated Diverter Ball Valves 24-hours-a-day manufacturing for reduced lead times Control systems for surface-mounted BOP stacks Full inspection and testing Diverter control systems Available for H2S service Emergency backup BOP control systems WeirInAction.com WeirOilandGas.com Copyright 2013, Weir Engineering Services Limited. All rights reserved. WEIR is a trademark and/or registered of Weir Engineering Services Limited. Jamie Cummings Telephone: +44 (0) j.cummings@weirservices.co.uk