SPM QWS 1000S HD Well Service Pump
|
|
- Gertrude Caldwell
- 5 years ago
- Views:
Transcription
1 SPM QWS 1S HD Well Service Pump Oil & Gas The SPM QWS 1S HD is designed with quick and practical maintenance in mind, while supplying 6% higher rod load at pressures of 15, utilizing a 3 plunger and 2, utilizing a 2.5 plunger. The SPM QWS 1S HD pump has been designed to eliminate contamination from pumping media into the power end, lengthening pump component life. Retrofit kits are available for customers currently operating SPM QWS 1S pumps, helping them make the transition to the SPM QWS 1S HD pump. Customers are able to update their units to the latest technology without the capital investment of a complete new unit. Design Features Increased rod load by 6%* to achieve 15 ksi rating with a 3 plunger or 2 ksi with a 2.5 plunger Eliminated fluid and proppant contamination potential in the power end greatly increasing power end seal life Removed 1 lbs (7%)* of reciprocating weight per cylinder while maintaining or improving design safety factors Improved lubrication through the use of ported crankshaft and ventilated shell bearings Reduced maintenance time by not having to remove the diaphragm seal in order to remove packing nut Contamination of the power end is also reduced* as the power end remains sealed during fluid end maintenance Knuckle bearing connecting rod design provides 7% more surface area for improved load transfer* Technology can be retrofitted into existing pumps without modification * Compared to conventional SPM QWS 1S pump Applications: Cementing, acidizing, gravel packing, snubbing Maximum Brake Horsepower Input... 1 BHP (746 kw) Maximum Rod Load Capacity...16,29lbf (472 kg) Stroke Length...6 (152.4 mm) Gear Ratio :1 Approximate Length...5 (1,27 mm) Approximate Width... 73" (1,854 mm) Approximate Height... 24" (69 mm) Approximate Weight (Dry)... 7,4 lb (3,193 kg) Note: Pump dimensions and weights are approximate. For full detailed drawings, please contact Weir. Copyright S.P.M. Flow Control, Inc All rights reserved.
2 QWS 1S & QWS 1S HD Pump Performance Chart 1,2 Plunger Diameter Displace Per Rev Displacement at Pump Strokes per Minute/Pinion RPM in (mm) gal/rev (liter/rev) ) 2 ½ (63.5).64 (2.4) 32 (121) 216 (149) 71 (27) 216 (149) (478) (84) 181 (685) 8527 (59) 236 (892) 6546 (45) 29 (199) 5312 (37) 2 3 /4 (69.9).77 (2.9) 39 (146) (123) 86 (327) (123) 153 (578) 115 (7) 219 (829) 747 (49) 285 (179) 541 (37) 351 (133) 439 (3) 3 (76.2).92 (3.5) 46 (174) 15 (13) 13 (389) 15 (13) 182 (688) 8491 (59) 261 (986) 5921 (41) 339 (1284) 4546 (31) 418 (1583) 3689 (25) 3 ½ (88.9) 1.25 (4.7) 62 (236) 112 (76) 14 (53) 112 (76) 247 (936) 6238 (43) 355 (1342) 435 (3) 462 (1748) 334 (23) 569 (2154) 271 (19) 4 (11.6) 1.63 (6.2) 82 (39) 8438 (58) 183 (692) 8438 (58) 323 (1222) 4776 (33) 463 (1753) 3331 (23) 63 (2283) 2557 (18) 743 (2814) 275 (14) 4 ½ (114.3) 2.7 (7.8) 13 (391) 6667 (46) 231 (876) 6667 (46) 49 (1547) 3774 (26) 586 (2219) 2632 (18) 764 (289) 22 (14) 941 (3561) 1639 (11) Input Power: BHP (kw) 446 (333) 1 (746) 1 (746) 1 (746) 1 (746) 1 (746) 1 Based on 9% ME and 1% VE Intermitten Service Only. 2 Pumps operating in excess of 15, I require special gauge and discharge flanges. Contact SPM Engineering for information. Cells highlighted in blue are are intermediate zones where erosion is more prevalent when 3" iron is used (MAX 778 GPM/2945LPM) SPM QWS 1 Pinion Torque Curve 12 PINION TORQUE (lb f -ft) ,17 ft-lbf MAX 1% BHp 9% BHp 8% BHp 7% BHp 6% BHp 5% BHp 45% BHp Copyright S.P.M. Flow Control, Inc All rights reserved.
3 SPM QWS 1S & QWS 1S HD 2.5 Plunger Horsepower Curve ,6 PSI MAX 1% HHp 22 9% HHp SPECIAL GAUGE AND DISCHARGE FLANGES REQUIRED IN THIS ZONE 8% HHp 7% HHp 6% HHp 5% HHp 15k GPM MAX SPM QWS 1S & QWS 1S HD 2.75 Plunger Horsepower Curve ,851PSI MAX SPECIAL GAUGE AND DISCHARGE FLANGES REQUIRED IN THIS ZONE 1% HHp 9% HHp 8% HHp 7% HHp 6% HHp % HHp 15k GPM MAX Copyright S.P.M. Flow Control, Inc All rights reserved.
4 SPM QWS 1S & QWS 1S HD 3. Plunger Horsepower Curve % HHp ,PSI MAX 9% HHp 8% HHp 7% HHp 6% HHp % HHp 15k GPM MAX SPM QWS 1S & QWS 1S HD 3.5 Plunger Horsepower Curve % HHp ,2PSI MAX 9% HHp 8% HHp 7% HHp 6% HHp % HHp 3" Iron Flow Limit GPM MAX
5 SPM QWS 1S & QWS 1S HD 4. Plunger Horsepower Curve ,438PSI MAX 1% HHp 9% HHp 8% HHp 7% HHp 7 6% HHp 5% HHp GPM MAX SPM QWS 1S & QWS 1S HD 4.5 Plunger Horsepower Curve ,667PSI MAX 1% HHp 9% HHp 8% HHp 7% HHp 6% HHp 5% HHp " Iron Flow Limit GPM MAX Weir Oil & Gas 61 Weir Way Fort Worth, TX 7618 USA Copyright 217, S.P.M. Flow Control, Inc. All rights reserved. SPM, SAFETY HAMMER, SAFETY IRON and SUR-DROP are trademarks and/or registered trademarks of S.P.M. Flow Control, Inc.; WEIR and WEIR (logo) are trademarks and/or registered trademarks of Weir Engineering Services Ltd. Certain aspects of some of the products featured in this document are protected by patents pending and granted in the name of S.P.M. Flow Control, Inc. T F
SPM Pump Product Catalog
SPM Pump Product Catalog General Corporate Overview Corporate Profile Weir Oil & Gas provides superior products and service solutions which make our upstream customers more efficient. More customers choose
More informationSPM Pump Product Catalog
SPM Pump Product Catalog Table of Contents 2 CORPORATE OVERVIEW 2 CORPORATE PROFILE 2 QUALITY, HEALTH, SAFETY AND ENVIRONMENT (QHSE) SYSTEMS - COMMITMENT TO QUALITY - COMMITMENT TO SAFETY 2 GLOBAL FOOTPRINT
More informationMEGAFORCE MF2250HP Triplex Frac Pump
Triplex Frac Pump MEGAFORCE MF2250HP Triplex Frac Pump MEGAFORCE MF2250HP Triplex Frac Pump GLOBAL SOLUTIONS DESIGNING, MANUFACTURING AND PACKAGING FOR THE OIL & GAS INDUSTRY Gear Set Assembly and Cranking
More informationW E L L S I T E S E R V I C E S
WELL SITE SERVICES TABLE OF CONTENTS Special Applications Crane Trucks...SA-1 Working Ranges...SA-2 Filter Pots...SA-3 Auxiliary Pumps...SA-4 Fluid Transfer Hose...SA-4 Baskets: Tool Baskets...SA-5 Baskets:
More informationSingle, oversized roller compresses a low friction hose through a full 360-degrees of rotation
Graco EP Series Peristaltic Hose Pump Technology Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation More flow per revolution than conventional designs Inexpensive
More informationHydra-Cell T80 Series Pumps Design Advantages
Hydra-Cell T80 Series Pumps Design Advantages An Economical and Environmental Choice Hydra-Cell is a positive displacement, multiple-diaphragm pump featuring a seal-less design that provides full containment
More informationHydraulic gear pumps and motors
PL 01 T E DISPLACEMENTS From To Hydraulic gear pumps and motors 0.07 in 3 /rev (1.07 cm 3 /rev) 5.56 in 3 /rev (91.10 cm 3 /rev) through bore aluminum body PRESSURE Max. Continuous Max. Intermittent Max.
More informationWEir Oil & Gas. Excellent Oil & Gas Solutions
WEir Products & Services Pressure Pumping Systems SPM Products Design Features and Benefits Can be applied to all existing SPM fluid end designs A combination of optimized geometry, improved manufacturing
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 96 gpm (366.1 l/min) 3292 BPD 2100 psi (145 bar) T100 Series low-pressure model with Nickel Aluminum Bronze (NAB)
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: 45 gpm (170.4 l/min) Maximum Pressure: 3500 psi (241 bar) T100 Series medium pressure model with Nickel Aluminum Bronze pump head Available
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 45 gpm (170.4 l/min) 1543 BPD 3500 psi (241 bar) T100 Series medium-pressure model with Nickel Aluminum Bronze pump
More informationT100 Series High Pressure
T100 Series High Pressure Maximum Flow Rate: 26 gpm (98.4 l/min) Maximum Pressure: T100 Series high pressure model with Nickel Aluminum Bronze pump head Available to Meet API 674! Seal-less design eliminates
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel pump head
More informationIdentity code: Meta MTMa Diaphragm Metering Pumps Series: Meta diaphragm-type metering pump Version a
Identity code: Meta MTMa Diaphragm Metering Pumps MTMa Series: Meta diaphragm-type metering pump Version a H A Main drive Add-on drive Pump version: New Cross Reference Conversion Table from former version
More informationSingle, oversized roller compresses a low friction hose through a full 360-degrees of rotation
Graco EP Series Peristaltic Hose Pump Technology Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation More flow per revolution than conventional designs Inexpensive
More informationBERMAD Waterworks. BERMAD 700 Large Size Series. 700 Series. Features and Options. Model: 700-M5, 700-M6, 700-M5L
BERMAD 700 Large Size Series Model: 700-, 700-, 700-L Large scale pumping systems National and municipal water networks Reservoir and dam water level control Industrial water systems The BERMAD large size
More information3406E Truck Engine 5EK01821-UP(SEBP ) - Document Structure. Media Number -RENR Publication Date -01/02/2008 Date Updated -07/02/2008
Page 1 of 11 Shutdown SIS Previous Screen Product: TRUCK ENGINE Model: 3406E TRUCK ENGINE 5EK Configuration: 3406E Truck Engine 5EK01821-UP Systems Operation 3406E Truck Engine Media Number -RENR1273-07
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 1543 BPD 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel
More informationVersatile, Reliable Pumps for a Wide Range of Applications D66 Series
Versatile, Reliable Pumps for a Wide Range of Applications D66 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 366 l/min (96 gpm) 145 bar (2100 psi) API 674 T100 Series low pressure model with Stainless Steel pump head Available
More informationAppendix B Specifications for Vertical Single-Acting Models
Appendix B Specifications for Vertical Single-Acting Models 9 69 Equipment Type and Options Single-acting, vertical, reciprocating piston type vapor compressor Single packed rod NPT or Class 300 RF connections
More informationTABLE OF CONTENTS DESCRIPTION PAGE
TABLE OF CONTENTS DESCRIPTION PAGE BLOCK-HOOK COMBO...2 ROTARY SWIVEL...3 ROTARY TABLE...4 MKP STYLE SSW-40...5 MKF SERIES TRIPLEX MUD PUMPS... 6-8 MKP-165...9 MKP-275 TRIPLEX MUD PUMP...10 MKP-550 TRIPLEX
More informationPortable Extractor Products 1XP Series Pumps
Portable Extractor Products 1XP Series Pumps Product Quality, Reliability and Support You Expect www.catpumps.com Decrease Downtime and Increase Profits with Cat Pumps Quality that keeps your equipment
More informationFidmash. Coiled Tubing and Pressure Pumping Equipment
Fidmash Coiled Tubing and Pressure Pumping Equipment Table of Contents Coiled Tubing Equipment Coiled tubing units (CTU) Skid mounted CTU... 5 Land-based CTU... 5 Pressure control equipment Blowout preventer...
More informationVersatile, Reliable Pumps for a Wide Range of Applications D10 Series
Versatile, Reliable Pumps for a Wide Range of Applications D10 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationVersatile, Reliable Pumps for a Wide Range of Applications D35 Series
Versatile, Reliable Pumps for a Wide Range of Applications D35 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationSeries W709 AGS Butterfly Valves (175 psi/1270 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series W709 AGS Butterfly Valves (175 psi/1270 kpa) 20.07 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series W709 AGS (Advanced Groove System)
More informationAir Cooled Engine Technology. Roth 9 th Ch 6 Engine Performance Pages
Roth 9 th Ch 6 Engine Performance Pages 95 112 1. Internal combustion engines belong to the engine category. Gasoline Diesel Heat 2. The heavy flywheel provides the necessary to keep the crankshaft spinning
More informationPAHT pump PAHT X
MAKING MODERN LIVING POSSIBLE Data sheet PAHT pump PAHT X 674 444 danfoss.high-pressurepumps.com Table of Contents 1. Introduction...3 2. Benefits...3 3. Application areas...3 4. Technical data...4 5.
More informationSeries W706 AGS Butterfly Valves (300 PSI/2065 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series W706 AGS Butterfly Valves (300 PSI/2065 kpa) 20.06 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series W706 AGS (Advanced Groove System)
More informationVeljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
More informationG66 Series API bar (250 psi) for Non-metallic Pump Heads. G66 with Ductile Iron pump head. G66 with Polypropylene pump head.
G66 Series Maximum Flow Rate: Maximum Pressure: 248.7 l/min (65.7 gpm) 48 bar (7 psi) for Metallic Pump Heads 17 bar (25 psi) for Non-metallic Pump Heads API 674 ATEX G66 with Ductile Iron pump head www.hydra-cell.eu
More informationP SERIES PUMPS. 18mm Versions Nickle-Aluminum Bronze Models: P , P , P , P , P , P , P
P200-3100 SERIES PUMPS 18mm Versions Nickle-Aluminum Bronze Models: P217-3100, P218-3100, P219-3100, P220-3100, P221-3100, P227-3100, P230-3100 Triplex Ceramic Plunger Pump Operating Instructions/ Repair
More information2/4/6.3, PAH 10/12.5, PAH 50/63/70/80/100 pumps
Data sheet PAH pumps 2/4/6.3, PAH 10/12.5, PAH 2/4/6.3, PAH 10/12.5, PAH 20/25/32 and and PAH 50/63/70/80/100 PAH 50/63/70/80/100 pumps danfoss.high-pressurepumps.com hpp.danfoss.com Table of Contents
More informationBERMAD Irrigation. Media Filtration Systems. Model Filters. Features and Benefits. Typical Applications
BERMAD Irrigation Media Systems Model 4000 BERMAD sand media filtration systems offer a low maintenance and efficient method to filter organic material and fine inorganic particulate from irrigation system
More informationAWWA SWING CHECK VALVES. Engineering Creative Solutions for Fluid Systems Since 1901
AWWA SWING CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS AWWA SWING CHECK VALVE Series 8001 Lever & Weight or Spring...1 Series 9001 Lever & Weight or Spring...2
More informationABEL HMT/HMQ. Hydraulic Diaphragm Pumps Pumping large volumes of abrasive fluids against high pressures
ABEL HMT/HMQ From the reciprocating positive displacement pump specialist Hydraulic Diaphragm Pumps Pumping large volumes of abrasive fluids against high pressures Diaphragm Pumps Solids Handling Pumps
More informationVeljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
More informationFlow Control Weir Specialty Pumps
Flow Control Weir Specialty Pumps WEMCO Hydrogritter WEMCO Hydrogritter Grit Removal System A high performance solution providing consistent, long-term grit removal with low operating and maintenance costs.
More informationMinerals. WARMAN WGR pump
Minerals WARMAN WGR pump 2 Introducing the 2 nd generation Warman WGR pump the pump of choice for the sand and aggregate market An ideal choice for sand and aggregate applications Weir Minerals has made
More informationPULSAPRO HYDRAULIC DIAPHRAGM METERING PUMP API-675 ENGINEERED PRODUCTS. Flow: up to 270 gph (1,022 lph) Pressure: up to 5,100 psi (350 bar)
PULSAPRO HYDRAULIC DIAPHRAGM METERING PUMP Flow: up to 270 gph (1,022 lph) Pressure: up to 5,100 psi (350 bar) Temperature: up to 275 F (135 C) Viscosity: up to 1,000 cps API-675 ENGINEERED PRODUCTS PULSAPRO
More informationGear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
More informationTECHNICAL DATA DEPT. CERTIFIED WITHIN 5% CHIEF ENGINEER
CUMMINS ENGINE COMPANY, INC Columbus, Indiana 47202-3005 Engine Performance Curve Basic Engine Model: Curve Number: 6CTA8.3 FR2-9626 Engine Family: CPL Code: Date: D41 1366 18Apr95 13 Displacement: 504.5
More informationVersatile, Reliable Pumps for a Wide Range of Applications H25 Series
Versatile, Reliable Pumps for a Wide Range of Applications H25 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More information...your single dedicated resource for cost-effective mine pumping solutions. For Rugged Mining Duty
...your single dedicated resource for cost-effective mine pumping solutions For Rugged Mining Duty Mine Face Dewatering Fuel Transfer Sump Transfer Muck/Slimes/Slurry Drift Dewatering Drillers Mud Dewater
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
More informationJET Manual 02 Triplex Pumps
JET Manual 02 Triplex Pumps Version 1.1 JET Manual 02 Triplex Pumps InTouch Content ID# 4127825 Version: 1.1 Release Date: July 31, 2006 Owner: Well Services Training & Development, IPC Schlumberger private
More informationPULSAPRO HYDRAULIC DIAPHRAGM METERING PUMP API-675 ENGINEERED PRODUCTS. Flow: up to 270 gph (1,022 lph) Pressure: up to 5,100 psi (350 bar)
PULSAPRO HYDRAULIC DIAPHRAGM METERING PUMP Flow: up to 270 gph (1,022 lph) Pressure: up to 5,100 psi (350 bar) Temperature: up to 275 F (135 C) Viscosity: up to 1,000 cps API-675 ENGINEERED PRODUCTS PULSAPRO
More informationVersatile, Reliable Pumps for a Wide Range of Applications M03 Mono-Block Series
Versatile, Reliable Pumps for a Wide Range of Applications M03 Mono-Block Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that
More informationVIKING HG SERIES HELICAL GEAR EXTERNAL GEAR PUMPS
Page 350.1 Series Description Viking s HG series positive displacement pumps are designed to provide low noise transfer and processing of clean, lubricating liquids for applications such as lube oils,
More information700 LARGE SIZE SERIES
700 LARGE SIZE SERIES ENGINEERING DATA CONTENT BERMAD 700 Large Size Series 2 Model: 700-M5, 700-M6, 700-M5L 2 Features and Options 2 Technical Data 3 Valve PlugswCharacteristics 3 Valve Travel 3 Flow
More information3" Elima-Matic Pumps. Air-Operated Double Diaphragm Pumps
3" Elima-Matic Pumps Air-Operated Double Diaphragm Pumps Bulk Chemical Transfer Resins Transfer Wastewater Treatment Food Processing Filter Press Applications Tanker Car Unloading 3" Elima-Matic Pumps
More informationENGINEERED PUMPING SYSTEMS. GRpumps.com
G O R M A N - R U P P P U M P S ENGINEERED PUMPING SYSTEMS GRpumps.com T H E R I G H T P U M P STATE-OF-THE-ART FACILITIES Superior products require state-of-the-art manufacturing facilities, and Gorman-Rupp
More informationModels GP8135 & GP8140
Models GP8135 & GP8140 Triplex Ceramic Plunger Pump Operating Instructions Repair and Service Manual Contents: Installation/Operating Instructions: pages 2-3 Pump Specifications: pages 4-5 Exploded View:
More informationWATER PROCESS SOLUTIONS
WATER PROCESS SOLUTIONS Chemtube 000 Tubular Diaphragm Metering Pump Robust & Reliable Chemical Metering The Chemtube 000 tubular diaphragm metering pump is hydraulically actuated and features a rugged,
More informationCAMERON HYDRAULIC DATA
CAMERON HYDRAULIC DATA Preface to the Twentieth Edition The Book is a Flowserve Corporation publication and, as in the previous nineteen editions, is published as an aid to engineers involved with the
More informationURAI ROTARY POSITIVE BLOWERS/EXHAUSTERS
URAI ROTARY POSITIVE BLOWERS/EXHAUSTERS B-12X95 October 2004 Versatile, reliable ROOTS Universal RAI blower fits your application Remarkably adaptable You can mount the Universal RAI blower upside down
More informationCGUII/CGFU. Model CGUII/CGFU Contents. EBARA PRO Cast Grinder Pumps. Model 32CGUII61.5S
Model Contents Model 3CGUII6.5S 3CGFU6.5S 3CGFU6.5 5CGFU6.S 5CGFU6. 5CGFU63.7S 5CGFU63.7 Section Page Specifications 8 Selection Chart 83 Performance Curves 86 Dimensions 88 Sectional View 83 QDC Information
More informationARIEL CORPORATION API 618 MODERATE-SPEED PROCESS COMPRESSORS Blackjack Rd Mount Vernon, OH
ARIEL CORPORATION API 618 MODERATE-SPEED PROCESS COMPRESSORS 740.397.0311 35 Blackjack Rd Mount Vernon, OH 43050 www.arielcorp.com Moderate-Speed Compressors Ariel API 618 Ariel s moderate-speed API 618
More informationV6 Vertical Pumps. Multi-Stage Pumps. Features: BOOK: MSP-010 DATE: Jan. 1, 2012
BOOK: MSP-1 DATE: Jan. 1, 212 The V6 Booster Pump is ideal for industrial/commercial applications where water pressure boosting is required. Designed with premium hydraulics for reliability and excellent
More informationMinerals. Conveyor Components
Minerals Trio Conveyor Components 2 Trio Idlers Our Trio range of idler products are CEMA rated and are engineered to meet your specific application needs. Our idler products are well suited for use across
More informationSeries
MTH PUMPS 15 25 26 17 27 Series Flexible Coupled Capacities to 15 GPM Heads to 115 Feet Low NPSH Requirements Page 1-19 15 17 25 26 27 LIMITATIONS Discharge Pressure Seal Pressure* Suction Pressure (Min.)
More information~11. H. J. WEBER & co W. CHICAGO AVENUE CHICAGO 51, ILLINOIS COLUMBUS MACHINE TOOLS - FABRICATING EQUIPMENT
~11 H. J. WEBER & co. 5722 W. CHICAGO AVENUE CHICAGO 51, ILLINOIS COLUMBUS 1-56 MACHINE TOOLS - FABRICATING EQUIPMENT c D PO ER PRESSES OPEN BACK INCLINABLE The SIXTY SERIES of C leveland Inclinable Open
More informationDependable Centrifugal, High Pressure and Diaphragm Pumps WATER PUMPS
Dependable Centrifugal, High Pressure and Diaphragm Pumps WATER PUMPS HIGH PRESSURE PUMPS Multiquip High Pressure Centrifugal Pumps represent dependability and performance for jobs that call for high head
More informationIndustrial Pumping Equipment PowerMaster III
PowerMaster III Features State-of-the-art, fully pneumatic air motors, 3, 4, 6, 8 inches (76, 101, 152, 203 mm) diameter. Full six-inch stroke for greater output per cycle. Modular design for easy repair.
More informationSeries PHP10 Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Series PHP1 Series PHP1 Variable Volume, Piston Pumps Bulletin 2-18/US 123 Catalog HY13-1553-1/N,EU Series PHP1 Performance Information Series PHP1 Pressure Compensated, Variable
More informationCMBE Booster. Lenntech. Description 50/60 Hz. Horizontal, multistage centrifugal boosters
GRUNDFOS DATA BOOKLET CMBE Booster Horizontal, multistage centrifugal boosters Description 50/60 Hz Drinking Water System Component NSF / ANSI 61 NSF / ANSI 372 Lenntech info@lenntech.com Tel. +31-152-610-900
More informationSeries 709 Butterfly Valves (175 psi/1270 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series 709 Butterfly Valves (175 psi/1270 kpa) 08.03 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series 709 grooved end butterfly valve offers
More informationMinerals. WARMAN Centrifugal Slurry Pumps WBH Pump
Minerals WARMAN Centrifugal Slurry Pumps WBH Pump New design and manufacturing techniques result in improvements in performance all with the Warman slurry pump quality that you expect Technology with a
More informationMOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1442 Page 1442.
Page 1442.1 TABLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Specifications...2 Model Number Key...3 Cutaway View & Pump Features...3 Dimensions C, F, FH Sizes...4 Dimensions
More informationNon-Submersible Pumps
BT4 Series Booster Pumps Cast Iron Features: Designed for boosting water pressure from a variety of sources including municipal and private water systems. Available with either cast iron or stainless steel
More informationDraw on Our Strength. Complete Reciprocating Pumps Line. Quality Service Innovation
Draw on Our Strength INDUSTRIAL OIL & GAS SPECIAL PURPOSE Complete Reciprocating Pumps Line Quality Service Innovation History of Myers Founded in 1870 by brothers Frances and Philip Myers in Ashland,
More informationWaste Injection (CRI) Pump Units
Waste Injection (CRI) Pump Units Model: CRI 450 & CRI 1680 450kW to 1680kW (250HP to 2500HP) 94/9/EC ATEX - 97/23/EC - PED 2006/42/EC Machinery Directive CE Marked Applications: Waste Injection/Cuttings
More information103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
More informationContents Project: Model: Chk d: Date:
Contents Model DSHU6. DSHU6.7 DSHU6. DSU6. DSHU6. DSU6.7 DSHU6.7 8DSU6. 8DSHU6. 8DSU6.7 8DSHU6.7 DSU6. DSU67. Section Page Specifications -7, 8 Selection Chart -7., 8. Performance Curves -6 Outline Drawings
More informationInk Manufacturing and Printing Solutions
Ink Manufacturing and Printing Solutions Solutions for pail, drum, or bulk tank ink applications Springer Pumps, LLC Tel: 866-777-6060 Fax: 866-777-6383 INFO@springerpumps.com Leading The Way In Quality
More informationAODD PUMPS FOR YOUR MOST SEVERE APPLICATIONS
AODD PUMPS FOR YOUR MOST SEVERE APPLICATIONS HEAVY DUTY FLAP VALVE PUMP HEAVY DUTY BALL VALVE PUMP CONTAINMENT DUTY BALL VALVE PUMP ENSURES YOUR SUCCESS SANDPIPER Signature Series AODD pumps are engineered
More informationHandwheels, Limit Stops and Lever Operators
Sizing & Selection 18 Handwheels, Limit Stops and Lever Operators LINEAR ACTUATOR HANDWHEELS Valtek linear actuators are available with two types of handwheel designs: the continuously connected handwheel
More informationG25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationPUMPS & FLUID ENDS. THE UNx ADVANTAGE UP TO 15,000 PSI (1000 BAR) FEATURES AND BENEFITS
THE UNx ADVANTAGE FEATURES AND BENEFITS Through nearly twenty years of service, the Jetstream UNx Fluid End has remained the most efficient, easy-to-use, and versatile waterblast tool available. Standard
More informationOil & Gas Ratings Guide. April 2015
Oil & Gas Ratings Guide April 2015 Table of Contents Table of Contents Caterpillar: Making Sustainable Progress Possible... 5 EPA Nonroad Emissions Limits and Timing... 6 EU Nonroad Emissions Limits and
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
More informationDD13 Engine Fire and Emergency Model
DD13 Engine Fire and Emergency Model FROM 470-525 Horsepower FROM 1650-1850 lb-ft Torque DISPLACEMENT 12.8 Liters DETROIT DD13 ENGINE IS EXCLUSIVE TO PIERCE CUSTOM APPARATUS. DD13: WITH SCR EMISSIONS TECHNOLOGY.
More informationBooster Pumps. Non-Submersible Pumps. BT4 Series. Cast Iron Features: Applications:
BT4 Series CSA ENC 3 COF CSA 3 C US CSA 18 UL 8 Applications: Boosting water pressure from either city mains or private water systems. Pressure washing buildings and floors. Poultry houses. Spray cooling
More informationSingle-Acting Triplex Mud Pumps
Single-Acting Triplex Mud Pumps 275 to 2000 HP Gardner Denver drilling pumps are constructed of nodular iron which incorporates high strength and improved frame stiffness with lower stress levels, at approximately
More informationAir Powered Double Diaphragm Pumps. Polypropylene Pumps. Made In Japan
Air Powered Double Diaphragm Pumps 2016 Polypropylene Pumps Made In Japan Presenting YTS Double Diaphragm Pumps Made In Japan Non-Lubricated Design High Flow Rates Efficient Air Consumption Easy & Fast
More informationfranklinwater.com 50 Hz 6" STS SERIES Submersible Turbine Pumps
franklinwater.com 5 Hz 6" STS SERIES Submersible Turbine Pumps 2 FEATURES Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump
More informationG03 Mono-Block Series
G03 Mono-Block Series Maximum Flow Rate: 11.7 l/min (3.1 gpm) Maximum Pressure: 103 bar (1500 psi) for Metallic Pump Heads ATEX Mono-Block (G03) Shaft-driven with Stainless Steel pump head Mono-Block (G03)
More informationHALLMARK INDUSTRIES INC.
4 Deep Well Submersible Pump Part # Power Flow M 3 /H 0 1 2 2.6 3.2 3.6 4.2 4.5 Weight HP Volt Amp Flow (GPM) 0 4.6 9.1 11.5 14 16 18.4 20 (lbs) MA0343X-4 1/2 115 6.5 Head (ft) 154 142 120 103 80 56 27
More informationSolutions for DOT 117 / 117R Railcars
Solutions for DOT 117 / 117R Railcars Built to Deliver Maximum Performance and Safety for High-Hazard Flammable Trains (HHFTs) and High-Hazard Flammable Unit Trains (HHFUTs) Midland Proudly Provides the
More informationSeries 706 Butterfly Valves (300 PSI/2065 kpa)
IPS CARBON STEEL PIPE GROOVED VALVES Series 706 Butterfly Valves (300 PSI/2065 kpa) 08.17 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION The Series 706 grooved end butterfly valve offers
More informationStud Tensioner. Leading provider of bolt loading & removal solutions
ZipTENSIONER Stud Tensioner For Subsea, Nuclear, Wind and other specialty applications Simultaneously tensions multiple fasteners Half the time required by conventional tensioners One piece installation
More information30T-2 Triplex Plunger Pump Parts List
30T-2 Triplex Plunger Pump Parts List 30T-2 Types: 30T-2L 30T-2H Sales / Technical Information T P.O. Box 4638 Houston, Texas 77210-4638 USA Tollfree: 1 (800) 324-4706 Phone: 1 (918) 447-4600 Fax: 1 (918)
More informationAPP pumps APP / APP / APP / APP (W) / APP / APP / APP 21-43
Data sheet Data sheet APP Pumps APP 0.6-1.0 / APP 1.5-3.5 / APP (W) 5.1-10.2 / APP 11-13 / APP pumps APP 16-22 0.6-1.0 / APP / 21-43 APP 1.5-3.5 / APP (W) 5.1-10.2 / APP 11-13 / APP 16-22 / APP 21-43 ro-solutions.com.
More informationSeries: GNA5-1-1/4, GNA6-1-1/4
1750 RPM - 60Hz. CAPACITIES TO 40 GPM (2.5 LPS) HEADS TO 0 FEET (9 m) USA: (97) 778-8947 Canada: (905) 457-622 International: (97) 615-598 1 500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 15 FEET
More informationD Series. Centrifugal Pumps. Pump End Kits. Features: PAGE: CP-435 DATE: June 5, 2006
D Series Pump End Kits PAGE: CP-43 DATE: June, 06 D Maximize your fl exibility and response time for standard or special applications using end suction centrifugal pumps... industrial use, transfer circulation
More informationENDURON Crushers. Excellent Minerals Solutions. SP Series Cone Crushers
ENDURON Crushers Excellent Minerals Solutions SP Series Cone Crushers Introducing Enduron crushers from Weir Minerals. The Enduron SP cone crusher is characterized by a unique and ingenious design, easily
More informationSD Series. Slurry Duty Pumps. Hydra-Cell Slurry Duty pumps are specifically designed for abrasive duty applications in order to:
SD Series Slurry Duty Pumps Hydra-Cell Slurry Duty pumps are specifically designed for abrasive duty applications in order to: Increase flow Reduce and simplify maintenance Extend pump life Provide quiet
More informationHydraulic Power Supply and Motors Concept and Theory
Hydraulic Power Supply and Motors Concept and Theory Graco, Inc. P.O. Box 1441 Minneapolis, MN 55440-1441 1996 Graco Inc. Form No. 321-046 1/96 Rev 2 SL Training 11/14 Hydraulic Systems Component Identification
More information: see performance curve rev. A : suction 900 mm / discharge 700 mm
PUMPUNIT HK700 PUMP General The HK pump is a single-stage mixed-flow centrifugal pump for lifting large quantities of water to medium heads. The pump is suitable for heavily contaminated and unpurified
More information