Measuring System 9-7. Supplied By: Car-O-Liner. Includes: Measuring Slide (M90). Transport Wagon (M81). Radio Link. Car-O-Soft Vision.

Transcription

1 2006/2007 SECTION 9 Car-O-Tronic Vision Computerized Electronic Measuring System Car-O-Tronic Vision is the revolutionary computerized electronic measuring system that: Provides upper and lower body measuring. Provides damage and repair documentation. Speeds the overall repair process. With Car-O-Tronic, your technicians repair more vehicles to higher tolerances in less time. Robotic-type measuring probe eliminates the need for lengthy setup. The all new software lets your Car-O-Tronic Vision System communicate via Blue Tooth with your PC. As a Windows based system, it s easy to learn and use and offers multiple screen options, including highly visible and instructional graphics. Provides a complete damage/repair report useful to shop managers, customers and insurance companies for verifying work needed and performed. Repair data is supplied on over 10,000 cars and light trucks. Data on new vehicles is supplied as soon as the vehicles are introduced. Car-O-Tronic s articulating measuring arm communicates with the PC through a wireless Blue Tooth Technology. Car-O-Tronic is easy to learn and use. Car-O-Tronic eliminates many computations left up to the technician, so repairs are made faster and more accurately. Body shop, collision and refinishing service EQUIPMENT Measuring System Car-O-Tronic identifies the damaged areas of the vehicle and just as important, the undamaged areas. Car-O-Tronic is compatible with any existing Car-O-Liner collision repair system. It can also be used with virtually any competitive system with flat surfaces on which a Car-O-Liner measuring bridge can be placed. All vehicle measuring data is stored in your computer and can be called up into a variety of easy-to-follow graphic or numeric screen options. On-screen instructions help technicians operate the Car-O-Soft software. Upper body measuring is simple and accurate with the high measuring point adaptor. Car-O-Tronic provides three-dimensional, comparative or point-to-point measuring modes. Measuring Slide (M90). Transport Wagon (M81). Radio Link. Car-O-Soft Vision. Measuring Bridge 4 m (M74). Measuring Parts. Battery Charger 110 volt. CR CR CR Monitor Cover (M82). Measuring Bridge 5 m (M75). Car-O-Tronic Bridge Support Stand (M802). Computer System Minimum Requirements: Pentium IV processor 256MB RAM Windows 98 (Second Edition) 24MB graphics card 12X CD/DVD drive Soundcard for sound effects Minimum 3GB hard drive Desk jet printer (1) active communication port TO ORDER FAX:

2 9-8 Body shop, collision and refinishing service EQUIPMENT 2006/2007 SECTION 9 Car-O-Tronic Classic Computerized Electronic Measuring System Car-O-Tronic Classic is the revolutionary computerized electronic measuring system that: Provides upper and lower body measuring. Provides damage and repair documentation. Speeds the overall repair process. With Car-O-Tronic, your technicians repair more vehicles to higher tolerances in less time. Robotic-type measuring probe eliminates the need for lengthy setup. Provides a complete damage/repair report useful to shop managers, customers and insurance companies for verifying work needed and performed. Repair data is supplied on over 10,000 cars and light trucks. Data on new vehicles is supplied as soon as the vehicles are introduced. Car-O-Tronic s articulating measuring arm communicates with the PC through a wireless Blue Tooth technology. Car-O-Tronic is easy to learn and use. Car-O-Tronic eliminates many computations left up to the technician, so repairs are made faster and more accurately. Car-O-Tronic identifies the damaged areas of the vehicle and just as important, the undamaged areas. Car-O-Tronic is compatible with any existing Car-O-Liner collision repair system. It can also be used with virtually any competitive system with flat surfaces on which a Car-O-Liner measuring bridge can be placed. Measuring System All vehicle measuring data is stored in your computer and can be called up into a variety of easy-to-follow graphic or numeric screen options. On-screen instructions help technicians operate the Car-O-Soft software. Upper body measuring is simple and accurate with the high measuring point adaptor. Car-O-Tronic provides three-dimensional, comparative or point-to-point measuring modes. Measuring Slide. Transport Wagon (M84). Car-O-Soft Vision. Measuring Bridge 4 m (M74). Measuring Parts (M62). Battery Charger 110 volt. CR CR Measuring Bridge 5 m (M75). Car-O-Tronic Bridge Support Stand (M802). Computer System Minimum Requirements: Pentium IV processor 256MB RAM Windows 98 (Second Edition) 24MB graphics card 12X CD/DVD drive Soundcard for sound effects Minimum 3GB hard drive Desk jet printer (1) active communication port NEW FOR06 TO ORDER FAX:

3 2006/2007 SECTION 9 Car-O-Mech Mechanical Measuring System Car-O-Liner s high precision engineering sets the Car-O-Mech Mechanical Measuring System and accessories apart from the rest. Fast and easy to use, the system includes a measuring bridge, measuring slides and adaptors, together with a durable tool wagon for accessories. All measurements are made in close cooperation with vehicle manufacturers around the world. These exact measuring specifications help you increase productivity by eliminating uncertainties before, during and after repairs. Upper body measuring points are easy to reach with the optional M900 upper body measuring system. The universal M217 measuring adaptor is useful for those hard to reach measuring points. Car-O-Print 2000 software along with Car-O-Data allows you to precisely target the correct measuring point. Measuring tube and adaptor fit over bolt head in tight places. Length, width and height can be easily read at a glance for unsurpassed accuracy. The portable tool cabinet and cart keep the measuring and clamping components close at hand and well organized. Body shop, collision and refinishing service EQUIPMENT Measuring System Car-O-Mech lets you quickly measure dozens of points on the vehicle, saving time and legwork during repairs. Developed in cooperation with domestic and foreign vehicle manufacturers for use exclusively with Car-O-Liner equipment, Car-O-Liner s data sheets provide technicians with upto-date measurement information for unsurpassed accuracy. Data on new vehicles is supplied as soon as it is introduced. Measuring Parts. Measuring Bridge 4 m. Tool Wagon. Tube B L=20 mm. Measuring Gauge. Measuring Gauge. Car-O-Print Data. CR Measuring Bridge 5 m. CR Upper Body Measuring System. 9-9 Car-O-Mech Measuring System 9-9 TO ORDER FAX:

4 Body shop, collision and refinishing service EQUIPMENT 2006/2007 SECTION 9 Mark 6 Series Bench Systems Model No. CRMARK61 Designed with optimum user-friendliness, Car-O-Liner s Mark 6 Series allows accurate repairs to be made faster than ever before. Optional packages include a base frame on wheels without measuring (Mark 6.1 Package), mounted onto a scissors lift with Car-O-Mech mechanical measuring (Mark 6.2 Package) or, mounted onto a scissors lift with Car-O-Tronic electronic measuring system (Mark 6.3 Package). Bench Systems The Mark 6 was specifically designed to provide more space between the machine s surface and the vehicle to improve access to damaged parts, tools and measuring components. With the 6.2 and 6.3 Packages, a hydraulic lift allows the working height to vary up to a maximum of 54". Repairs are made faster and easier because the damaged area is easier to see and reach. In addition, by allowing the work to be performed in an upright position, the Mark 6 drive-on system reduces the back, knee and shoulder fatigue that can slow down the most skilled technician For unmatched adaptability and efficient use of floor space, the Mark 6.1 Mobile System can be moved from workstation to workstation or out of the way or can be mounted onto an in-ground or scissors lift. 10-ton Draw Aligner featuring nearly continuous adjustment with 11 between each setting the Draw Aligner makes the correct angle easy to find. This increased adjustment capacity reduces the number of readjustments needed while pulling. In addition, Mark 6 s powerful Draw Aligner moves 360 around the system and has a built-in height extension for making higher pulls, faster. Finely milled steel frame provides a smooth, level surface for measuring equipment to rest on, resulting in to-the-millimeter accuracy. Optional side support system used to hold undamaged and already repaired components in place while pulling other areas. Also facilitates pushing, up pulls and down pulls. Standard Chassis Clamps and optional clamps hold vehicles securely even under the full 10-ton force of the Draw Aligner. CARMARK 6.1 Mobile System Base Frame. Bench Parts. Lock Wheels. Draw Aligner. Tire Stand. Double Grab Hook. 3/8" x 8' Chain. Ram Adaptor. 10-Ton Hydraulic Pump, Hose and Cylinder Set. CR CR CRMARK62 CRMARK63 Truck Repair Package. Side Support. Same as 6.1 but with T6 Scissors Lift and Car-O-Mech Measuring System with 4 m Bridge. Same as 6.1 but with T6 Scissors Lift and Car-O-Tronic Computerized Electronic Measuring System. CR Car-O-Flex for Mark 6. CR Ramp Kit. Mark 6 Series Bench Systems TO ORDER FAX:

5 2006/2007 SECTION 9 BenchRack Series CRBR50001 Model No. CRBR55001 CRBR50002 Whatever your current level of productivity, Car-O-Liner s BenchRack Series can help you surpass it. BenchRack is a marvel of function and design, with innovative features that CRBR50003 allow you to complete each phase of the collision repair process more quickly, more easily and more profitably. A revolutionary tilt feature scissors lift, available on all BenchRack models, makes loading easier when approach space is limited. After loading, BenchRack s lightweight drive-on ramps can be easily removed to provide optional access to the vehicle and damage. The working height is infinitely variable to suit the technicians height preference up to an industry leading 47-1/4" with a 9,200 lb. weight capacity. Fast-anchoring pillar jacks used to support vehicles during mounting, permit virtually any unibody or full frame car, pickup truck, sport utility or van to be clamped into place quickly and easily. Pull anywhere, 360 around the BenchRack with (2) powerful, hydraulic Draw Aligners that exert up to 10 tons of pulling force. Finely milled steel frame with stringent tolerances result in a smooth, level surface that provide the to-the-millimeter accuracy Car-O-Liner is famous for. Diamond-shaped cam locks provide a timesaving fast bolt system for anchoring and pulling components to be attached at any point along the rails. CRBR55001 CRBR m Frame with Tilt Lift. Ramp Kit. Power Unit. Draw Aligners (2). Ram Adaptors (2). 10-Ton Hydraulic Pump, Hose and Cylinder Set (2). Bench Parts. Side Support Kit. Tent Cart. Pillar Jack Kit. Double Grab Hook (2). 3/8" x 8' Chain with (1) Grab Hook. Body shop, collision and refinishing service EQUIPMENT racks CRBR55002 CRBR55003 CRBR42001 CRBR42002 CRBR42003 CR CR CRBR63001 CRBR63002 CRBR63003 Same as CRBR55001 with 5 m Frame. Same as CRBR55001 with 5 m Frame and Car-O-Mech Mechanical Measuring System with 5 m Bridge. Same as CRBR55001 with 5 m Frame and Car-O-Tronic Computerized Electronic Measuring System with 5 m Bridge. Same as CRBR55001 with Car-O-Mech Mechanical Measuring System with 5 m Bridge. Same as CRBR55001 with Car-O-Tronic Computerized Electronic Measuring System with 5 m Bridge. Same as CRBR55001 with 4 m frame. Same as CRBR55001 with 4 m frame and Car-O-Mech Mechanical Measuring System with 4 m bridge. Same as CRBR55001 with 4 m frame and Car-O-Tronic Computerized Electronic Measuring System with 4m bridge. Car-O-Flex for Bench Rack. Truck Repair Package. Same as CRBR55001 with 6.3 m frame. Same as CRBR55001 with 6.3 m frame and Car-O-Mech Mechanical Measuring System with 6.3 m bridge. Same as CRBR55001 with 6.3 m frame and Car-O-Tronic Computerized Electronic Measuring System with 6.3 m bridge TO ORDER FAX:

6 Body shop, collision and refinishing service EQUIPMENT 2006/2007 SECTION 9 Speed System Model No. CR Car-O-Liner s Speed System is a versatile lift platform that allows you to make efficient use of space in your shop, increase productivity and maximize capacity. Speed is ideal for a range of different tasks such as sheet metal work, assembly, disassembly, door adjustments, sanding, masking and other preparations for painting. All this with added capacity of light pulls. Speed is easy to install and easy to use. The Draw Aligner with a capacity of 5 metric tons is infinitely adjustable and self-locking, allowing you to easily set and lock the exact position required. It can be rotated within a large area so you can work more efficiently. Setup is fast and easy using Car-O-Liner s easy-on/easy-off attachments. Unique bench arms are vertically adjustable, making it easy to install the chassis clamps. Vehicles can be easily driven over the platform due to Speed s low profile of only 4". Lift Platform The lift frame has adjustable arms and the hydraulic lift is easily adjustable to the working height you prefer. Maximum lifting height is 5' 2" and maximum lift capacity is 5,000 lbs. Platform with Lift. Draw Aligner. Bench Arms (4). Power Unit. Chassis Clamps (4). 5-Ton Hydraulic Pump, Hose and Cylinder Set. 60 mm Height Extension. CRSpeedPlus Same as CRI with front and rear vehicle pulling capability. CR Chain Holder. CR Speed Check Deluxe. CR Adaptor Set for Speed Check (2). CR Side pull support. CR Down pull. CR Connection Kit. CR Chain shortener. CR Height adaptor CR TO ORDER FAX:

7 Body shop, collision and refinishing service EQUIPMENT 2006/2007 SECTION 9 CR500 Spot Welder The CR500 Spot Welder is designed for quality-minded body shops to provide quality spot welds with all new high strength steels and welding processes. Versatile multifunction gun. Easy to use C gun. Fully programmable PLC panel preset for best performance. Two-sided spot welding. Single-sided welding. Molding clip rivet welding. Stitch welding. 230 and 460 volt available. U.L. and E.T.L. listed. Heavy-duty robust construction meant for years of continuous use. Factory training available with ICAR Gold Class Points through the ICAR Training Alliance. ASE/CASE certified training department. Models: CR volt spot welder CR volt spot welder spot welder CR volt or CR volt spot welder C gun. Multifunction gun. Electrode assortment. 80 mm and 330 mm yokes. Dent puller. CR CR CR CR CR Tool panel. Cable support. 600 mm yoke. Fender edge kit. Electrode dresser NEW FOR06 CR500 TO ORDER FAX: