This Is No Ordinary Rack

Transcription

1 TITAN-360TM

2 This Is No Ordinary Rack From its brawny 10-ton towers to its impressive 12,000 pound lift capacity, the Titan-360 combines all the raw power you ll ever need with the innovative and easy-to-use features you ve come to expect from Chief to get the job done fast, right and profitably. The Titan-360 can handle virtually any vehicle that rolls through your shop from the smallest unitized frames to the big dual-axle extended-cab trucks. Plus the Titan-360 is fully compatible with all Chief computerized measuring systems, allowing you to perform simultaneous real time pulling and measuring. And best of all it s from Chief, which means your Titan-360 will be flexing its muscles and making you money for many years to come. No other rack can pull as much. No other rack can do as much. No other rack offers the value of the Titan-360. Room To Work The Titan-360 s 20-foot length and super-wide 88-inch deck can handle everything from small unitized frames to the largest SUV s and even dual-axle extended-cab trucks. 10-Ton Front Towers Like Chief s famous S21 and S21M racks, Titan-360 front towers are pedestal mounted for easy movement and positioning, and provide 10-tons of pulling power at the hook. 10-Ton Rear Towers Titan-360 rear towers also boast 10-tons of pulling power, and feature Chief s patent-pending Sure- Lock clamping mechanism for fast and easy operation. Low Maintenance Tower roller bearings automatically raise off the channel surface when towers are locked, and bear no weight during pulls to precisely reverse damage for faster, higher quality repairs. More Pulling Power Ability to gang towers for simultaneous multiple pulls to precisely reverse damage for faster, higher quality repairs. Greater Flexib True 360-degree p around the deck p precise positionin

3 Arm Yourself With Information All Titan-360 towers offer 10-tons of pulling power at the hook. True 360-degree pulling capability. Ability to gang towers anywhere around the deck. Patent-pending Sure-Lock clamping system acts like a pair of locking pliers, securing towers with one easy movement. Innovative Chief lift mechanism can bench-press over 12,000 pounds more than enough to handle any job you throw at it. Patent-pending electric-over-hydraulic system for smoother, faster operations. Low pressure system for more power, safer operation and tighter control. ility ulling with ability to gang towers anywhere erimeter even at the corners for extremely with no dead spots. More Lifting Power Innovative Chief lift mechanism can hoist over 12,000 lbs without breaking a sweat. Not sure the Titan-360 is right for you? Then take a look at the quality materials and features the Titan offers and compare them against any other available pulling system. Then decide for yourself if the Titan-360 offers the workmanship, durability and value you need. FEATURE TITAN-360 Manufacturing Location... USA: Grand Island, Nebraska Pulling Force Per Front Tower Ton at the hook Pulling Force Per Rear Tower Ton at the hook Lift Capacity... 12,000 lbs Simultaneous Multiple Pulling... Yes True 360 Degree Capabilities... Yes Ability To Gang Towers Anywhere... Yes All Lift And Pull Functions Operate From One Hand-Held Control... Yes Tower Roller Bearing Raise So As To Bear No Weight During Pulls... Yes Internal Roller Bearings... Tapered/Lubrication Free Tower Materials... ½ and 3/8 high-strength steel Tower Ram Inch Stroke Tower Rollers... 4 each Deck Plate... A-572 Steel Single Piece Temper Pass Deck Plate Strength... 50,000 PSI Yield Deck Plate Cuts... High Definition Plasma Deck Tolerance Thousandths Tie-Down Openings (With 2 Cross-Members) Powder Coated Components... Yes Training Available... Yes Service Available... Yes Technical Support Available... Yes Available Configurations: Series (2 Towers Front /1 Back) 22 Series (2 Towers Front / 2 Back) 31 Series (3 Towers Front / 1 Back) 32 Series (3 Towers Front / 1 Back)

4 Unique interchangeable drive-on ramps for safer loading and unloading. True 360-degree pulling capability. Two wheel chocks prevent forward/backward movement of vehicle. The Titans unique design lets you gang three towers together for faster, more accurate repairs. 12,000 lbs. lift capacity. Dual-acting hydraulics will give you more push/pull precision and your shop the versatility it needs to take on any job. Anchoring with single-bolt clamp design is compatible with special adapters, including FAST, Honda and Corvette. 218 steel reinforced tiedown openings (including cross members), for virtually unlimited holding. Trademark telescoping tower heads. 10 tons of pulling power at the hook front and back. Tall towers and adjustable collars position easily to place pulls exactly where you need them. Patent-pending Sure-Lock mechanism pins and secures towers with one easy movement for added speed, accuracy and safety. Valve on each tower allows you to operate towers separately or simultaneously. Tower roller bearings raise off the channel surface and bear no weight during pulls for years of maintenancefree operation. Titan-360 Specifications Wide 88-inch deck is perfect for trucks, SUVs and full-frame vehicles. Universal Anchoring System with 8 working heights adjusts to most vehicles for fourpoint positioning. Unique deck design for down pulls wherever you need them. Central hydraulic pump allows all pushes and pulls to be controlled individually or simultaneously to gently push/pull out the damaged metal for the fastest, most accurate repair possible. Perfect 31-inch working height makes repair work easy. Hand-held control lets you position yourself around the vehicle for peak visibility and operator safety. One push of a button lets you control all of the towers or raise and lower the machine. Two moveable cross members give added versatility. 21 Series 22 Series 31 Series 32 Series Deck Length With Ramps Front Towers Extended Front & Rear Extended Deck Width Front Towers Extended On Both Sides Rear Towers Extended On Both Sides Height With Rams Extended Weight... 5,800 lbs 7,100 lbs 7,250 lbs 7,900 lbs Lift Capacity... 12,000 lbs 12,000 lbs 12,000 lbs 12,000 lbs Working Height Hydraulic Power Per Tower Ton 10-Ton 10-Ton 10-Ton Controls... Hand-Held Hand-Held Hand-Held Hand-Held Recommended Clearance Tie-Down Openings With Cross-members Titan Configuration Options 21 Series = 2 Front Towers / 1 Back Tower 22 Series = 2 Front Towers / 2 Back Towers 31 Series = 3 Front Towers / 1 Back Tower 32 Series = 3 Front Towers / 2 Back Towers

5 10 tons of pulling power at the hook front and back 12,000 lb. lift capacity True 360-degree capability Simultaneous pulling Shown with optional two-tone color scheme. BIG. BAD. BEAUTIFUL. The Chief Titan-360 combines the power and rugged durability of the S21 M with the innovative technology of the impulse to bring you one of the most powerful and versatile pulling systems on the market today.

6 Optional Accessories Titan Front Tower Add additional front towers for even greater power and versatility. Part # Right Part # Center Part # Left Titan Rear Tower Add additional rear towers with 10 tons of pulling power and Chief s patent-pending Sure- Lock clamping system. Part # FAST Anchoring Techs love Chief s FAST anchoring system because it s versatile, easy to use and gets the job done fast. Part # The Chief Titan-360. It s all the rack you ll ever need and then some! Don t settle for less. Call today to find out more! Proudly Distributed by Place Distributor Label Here Chief Automotive Technologies, Inc. reserves the right to alter product specifications and/or package components without notice Chief Automotive Technologies, Inc. Printed in the U.S.A. T-360 Revise 08/06