Multi-Dose Replacement Cartridges

Transcription

1 Specially formulated and designed to beautify, preserve, protect and clean wood, plastics, vinyl, leather, aluminium, brass and other household surfaces with a refreshing fragrance. Leaves a protective film to guard against harmful ultraviolet rays. Formula includes a mild detergent to remove build-up of dirt with an anti-static component to reduces dust settling after application. Specially formulated dry air freshener and sanitizer supplied in a large 400ml and 300ml aerosol can. Available in 12 pleasing and refreshing fragrances. Safe to use on carpets, curtains, leather, vinyl, etc. Multi-Dose Dispenses & Replacement Cartridges Our Metered Multi-dose dispenser is a battery operated automated aerosol dispenser which takes a 300ml aerosol can. The dispenser has multiple setting to manage the spray operation such as 4 release time settings (5, 10, 15 or 30 minutes) as well as control settings for day only use, night only use or 24-hour operation. The Multi-dose dispenser can be wall mounted or surface mounted, and is supplied with all required fixings. Multi-Dose Replacement Cartridges Use our Air freshener supplied in 300ml aerosols cans for use in our Metered Dose Dispensers. Available in selected fragrances, the multi-dose dispenser will deliver approximately 3000 metered doses and depending on the timing interval set, will last from 30 to 60 days. Universal Foam Cleaner Specially formulated to deep clean most surfaces with a people safe formula. Can be used in Ovens, Baths and Sinks but is strong enough to also be used on Aluminium and metal surfaces, Plastics, Upholstery, White Boards, Vinyl, Fabrics, Carpets and even remove grease on Machinery, etc. Spray surface to be cleaned and allow seconds for cleaner to do its thing. Surfaces may be rinsed with water if required and badly soiled surface/fabric may be brushed. Wipe with soft clean damp cloth to remove cleaner. Heavy Duty Universal Cleaner & Sanitizer Non-flammable, non-poisonous, Heavy Duty Universal Cleaner and sanitizer suitable for all surfaces including - hard surfaces, carpets, upholstery, machinery and engineering equipment. Safe to use on metal, painted surfaces, carpets, fabrics & machinery and can be used hot or cold. Low Foaming and especially suitable for use in high pressure washers, automatic scrubbers and carpet cleaners. Rinses easily leaving no streaks, smears or scum. For hard surfaces, such as baths, floors, walls etc. - Use a 3% solution (150ml / 5Lt water). For Carpets & Fabrics use a 10% solution dilution and for heavy grease such as Machinery use a 10% - 25% solution depending on extent of soiling. For bad and persistent stains, spot treat with the prepared solution or use Clarke Colours Foam Cleaner before cleaning or repeat cleaning. A general-purpose insecticide spray manufactured to kill mosquitoes, flies & cockroaches on contact. For flying Insects - Spray directly onto insect for quick knockdown & kill or close all doors and windows spray generally for 5 seconds for 15-20m 2 room. Vacate room and leave closed for 15min. Ventilate room after treatment. For crawling insects Spray onto surfaces where insects have been observed. The product has a residual effect of 24 hours if sprayed onto glass, wood and painted surfaces. Less effective when applied to raw or painted cement surface.

2 A cleaner specifically developed to clean Leather, Synthetic Leather and Vinyl surfaces from general grime, grease and oils. This cleaner can also be used on Rubber and most other hard surfaces. (We do recommend you first test on an inconspicuous part of the surface). Spray directly onto the surface and rub surface with a dampened cloth. Leave to dry. Vinyl Colour Spray is a colour-fast compound spray-on dye which Is specifically developed to treat Synthetic Leather, Vinyl, Canvas, Rubber and Cotton, but is also suitable to colour almost any surface. The surface to be sprayed must be thoroughly cleaned and free from grease and oil. The Leather and Vinyl Cleaner is recommended to preclean the surface.

3 Clarke Colours dyes are specially formulated for dyeing fresh and glycerine dried flowers and foliage. The dyes are easily used for a variety of other applications such as coral, wood, wicker work etc. and produce clean, clear and attractive finishes. Dyes are available in both single and double strengths. The results obtained will depend on dilution of the dye, the water quality and the nature of material being dyed. Hot solutions of dye may improve colour in certain instances. For specific species of grasses and flowers the quantity of dye and drying time may be required to be reduced. Colour Chart on reverse. Leafgloss Leafgloss cleans and produces a high, dust-free gloss on hard and soft leaved plants. Leafgloss also has a protective function against some common insect pests. Examples of plants that benefit from the use of leafgloss include rubber plants, xanthiums, philodendrons, delicious monsters, etc. Leafgloss is packed as an aerosol to ensure ease of application. Leafglow Leafglow has the identical attributes as leafgloss but is presented as a cream formulation and can be applied by hand. Clearset A clear spray designed to delay the opening of blossoms. This product can also be used as a fixative for decorations. Glycerine Clarke Colours Natural pure glycerine is developed to assist with the drying of flowers and foliage. Our Glycerine comes in 1Kg and 5Kg packs. Glycerine is hygroscopic and is a great solvent. This makes it a good product for cleaning and stain removal. Glycerine can soften hardened and set stains, so that even old stains can be more easily removed. For our range of flower paints see the Paint section of this catalogue.

4

5 for the Flower, Hobby, Arts & Crafts Clarke Colours range of paints was initially formulated to be soft and gentle enough to be used on floral arrangements to brighten and beautify their blooms. Our Fluorescent, Pastel and Brilliant colours are therefore safe to be used on fresh and dried flowers, polystyrene, plastics, wood, etc. The flower sprays are exceptionally quick drying, and produce a most attractive finish on virtually any surface. Our spray paints are particularly recommended for use on polystyrene and in the arts and crafts environment. To apply, spray with the can approximately 35cm the surface to be painted. Move the can gently and smoothly to-and-fro and build up successive coats of paint. Note: To prevent blockage in the nozzle, and ensure trouble free repeat usage; invert the can and spray for a few seconds to clear the valve and nozzle after use. For available colours see the Colour Chart on the reverse side. - for Commercial or Compressor applied Purposes Clarke s paint formula is also available in 1Lt and 5Lt liquid packs. This product is sold as our Petal Paint range. These 1Lt and 5Lt quantities allow for application by compressor driven spray guns, or other similar large or commercial scale environments and/or applications on fresh and dried flowers, polystyrene, plastics, wood, etc. Petal paint is supplied in our range of Brilliant, Pastel and Fluorescent colours. Petal Paint is a quick drying formula and produce a most attractive finish on virtually all surfaces. This paint is particularly recommended for use on polystyrene in the shop display and show stand environments. Available in more than 60 colours - see the Colour Chart on reverse. Christmas Snow A bright white, gentle snow spray for all year round decorating. Great for shop-front displays and sprayed on glass windows not to mention applied to Christmas trees at the festive season.

6 Please note: the colours may not be represented accurately in a printed or digital format. Colours when applied may also vary dependent on the substrate they are applied to. BRILIANT RANGE FLUORESCENT RANGE RANGE PEARL RANGE

7 Carburettor Cleaner Overtime, carburettors and choke valves can become clogged with gum, varnish and dirt, affecting performance. Our Handy Man Carburettor Cleaner quickly removes these deposits from the inside and outside of the carburettor to improve engine performance, fuel economy and reduced emissions. It can also effectively clean all nonpainted metal parts and surfaces. Will not harm catalytic converters or oxygen sensors, and contains no methanol or methylene chloride. If sprayed on painted surface, wipe off at once. However, this product is not recommended for fuel-injected vehicles. Carburettor Cleaner can be applied to a hot or hot or cold engine. With engine off and cool Carburettor: Remove the air cleaner and clean the outside of the carburettor and all the linkages. Avoid spraying electrical connections. Do not spray down carburettor throat with engine off. Manifold heat control: Spray on exposed ends of cool heat riser shaft. Allow to penetrate and clean. Move counterweight up and down until free. Penetrating Oil With engine running Carburettor: Spray to both ends of the choke valve shaft while working choke by hand. Spray down and around the carburettor throat to remove deposits from the throttle plate area. Do not spray below throttle plate. Choke: If choke sticks, remove choke cover and spray. PCV Valve: Disconnect the crankcase side of the valve and spray into the open end of the valve, while working the plunger back and forth. Penetrating oil, is very low-viscosity oil. It penetrates the narrow space between the threads of two parts and can be used to free rusted mechanical parts (such as nuts and bolts). It can also be used as a generalpurpose lubricant, a cleaner, or a corrosion inhibitor. Other uses include: removing chewing gum and adhesive stickers, lessening friction on metal-stringed musical instruments, various gardening purposes and household repair tasks, sprayed on aluminium and electrical connections to act as a water repellent. Highly recommended for a marine environment where penetrating oil keeps the ignition system free of water and acts a water inhibitor to aluminium engine parts. Can also be used as a chrome and stainless polish protective agent by giving a light spray and polish to stainless steel, aluminium rails and finishing details. Brake and Clutch Cleaner Brake and Clutch Cleaner has many uses. It not only eliminates iron and fibre dust from brake and clutch parts, but is also a powerful product for cleaning and degreasing of mechanical parts and removing oil, brake fluid, grease and other dirt from metal parts. It eliminates dust from brake and clutch parts and restores the friction of brake and clutch lining material, is chlorine free and leaves no residue. Liberally apply on parts by means of brush, cloth or atomiser. Allow to run off, evaporate or wipe off with a clean cloth. Repeat if conditions are extreme. Use include Cleaning brake parts such as drum and disk brakes, lining material, brake pads, block brakes, springs, cylinders, etc. Cleaning clutch parts such as clutch lining, pressure plate and all other clutch parts. Removing grease and dirt from mechanical and other parts of the car, bicycle, machines, etc. Note - With asbestos dust, take necessary safety precautions and remove as prescribed by the local legislation.

8 Crystal Car Polish A specifically formulated complex of protective waxes and polymers for automotive paint systems and fibreglass epoxy gel coats. Allows easy wipe-on / wipe-off application. No hard rubbing or buffing necessary if applied correctly. Supplied in a neutral colour suitable for all duco shades. Our polish provides excellent coverage, and delivers an outstanding economy of use. On completion of application leaves a hard protective, lustrous and long lasting shine free of unsightly residue. Silicone Sheen A specifically formulated product designed to beautify, preserve, protect and clean furniture, car dashboards and upholstery, rubber and other decorative items. Cleans, shines and protects car tyres, vinyl, rubber, leather, aluminium, brass and wood. Leaves a protective film to guard against harmful ultra-violet rays from the sun. Reduces dust settling from static, and removes build-up of dirt and polish. Apply sparingly to receiving surface on a moist cloth. Leave for a short time to penetrate and gently remove by rubbing and polishing with a soft dry cloth.

9 We put the product you want in an aerosol can. Our location in the business centre of South Africa, and knowledge of regulations and aerosol formulations mean that we are ideal for manufacturing aerosols which are destined for the South African and global markets. Whether it s a product idea, a product you have developed, or a product you require to be rebranded under your own label; Clarke Colours works in partnership with you to make it into a reality. With Clarke Colours, you are involved at every stage of product development; and can watch as your idea grows into the product you ve been imagining. If it is only an idea you have, and nothing else, then we can help throughout the process; from developing the right product, to giving you suggestions for how you want it to look on the shelves. We offer our customers aerosol filling and labelling & packing, all under one roof from product design, artwork through to the formulation and packaging. We have relationships with many design companies, to ensure the packaging meets your requirements. This affords our clients the opportunity for a flexible product mix & faster turnaround. Our Aerosol production lines provide flexible filling options. Small Volume Runs - for small volume requirements (runs as little as 120 Units) our hand filling lines provide a great option for customers that have unique products with lower volume production requirements and cannot justify the investment in their own packaging facility. Feel free to us on info@clarkecolours.co.za or give us a call. Let s see how we can be of service. White Label (Sometimes referred to as Original Equipment Manufacturer or OEM) is a broad term whose meaning has evolved over time. In the past, OEM referred to the company that originally built a given product, which was then sold to other companies to rebrand and resell. Nowadays, the term is more frequently used to describe companies in the business of rebranding a manufacturer's products and selling them to end customers under their own label; effectively as their own product. Clarke Colours has a wide range of OEM/White Label Products that we manufacture to be rebranded and resold by others to their end user customers under their own label. This service is provided in conjunction with our Aerosol Contract filling services, using our own range of highly sought after products on a White-Label basis, as well as contract filling using our Clients Products. Contact us to enquire if we have a product to suit your needs. Research & Development for our customers includes custom product formulation, testing, filling, packaging and logistic services. Our integrated solution capability and our extensive network assist you in producing quality aerosol products at a very competitive cost.