Rig Inspection Report
|
|
|
- Anissa Brown
- 5 years ago
- Views:
Transcription
1 Lancaster Safety Consulting, Inc. 910 Sheraton Drive Suite 425 Mars, PA Phone: Fax: Company Name: Horizontal Well Drillers Completed by: Date: Note: The below items were previously cited by OSHA for not being completed or in place Item # 1 The rig derrick or structure shall not be modified without prior manufacturer approval. Item# 2 Ensure that the Geronimo Line is properly installed at all times. Item# 3 Ensure all high pressure lines are hobbled correctly with whip checks or chain hose hobbles as necessary to prevent separation. Hobbles and whip checks must be installed taunt. Updated August 27, 2012 Page 1 of 9
2 Item # 4 Spoil pit fencing and signage needs to be installed if necessary. Item# 5 All trailer steps need to be installed properly and secured from movement. Item # 6 Employees exposed to chemicals from mud mixing operations are required to wear protective goggles and a full face shield. Item# 7 Confined space signage must be provided for all accessible tanks. Prepared by: Updated August 27, 2012 Page 2 of 9
3 Item# 8 Eyewash stations must be available, maintained, clean, pressurized, inspected, and accessible at all times on the Mud Pits. Item# 9 First aid kits are required to be provided and properly stocked. Item# 10 Employee training on portable fire extinguisher use must be completed and documented. Item # 11 Hot work permits need to be completed or used for welding/cutting operations as necessary. Prepared by: Updated August 27, 2012 Page 3 of 9
4 Item# 12 Oxygen and fuel gas cylinders need to be stored 20 or more feet apart when not hooked up for use. Oxygen/acetylene cylinders are NOT to be stored on location. Item # 13 Regulators are not to be missing or damaged on compressed gas cylinders. Item# 14 Damaged flexible wiring must be repaired or replaced immediately by a HWD certified electrician. Item# 15 Material safety data sheets must be provided and maintained for all chemicals on site. Prepared by: Updated August 27, 2012 Page 4 of 9
5 Item # 16 Ensure that proper stair rails have been installed for all sets of stairs with 4 or more risers. Item# 17 Employees are required to wear all necessary flame resistant clothing. Item# 18 Ensure all fire extinguishers are mounted, accessible, unobstructed, charged, and inspected weekly. Item # 19 Pipe racks must be evenly chocked and free of damage. Prepared by: Updated August 27, 2012 Page 5 of 9
6 Item# 20 Bench grinders must be properly guarded. Tool rests are not to exceed 1/8" distance from the grinding wheel and tongue guards are not to exceed 1/4". Item # 21 Ensure that there is not grease or oil accumulating on compressed gas cylinders. Item# 22 All walking working surfaces over 4 foot high must be properly guarded and all floor holes are covered. All handrails must include a top rail, mid rail, and toe board. Item# 23 Employees are not to be exposed to live energized parts. Prepared by: Updated August 27, 2012 Page 6 of 9
7 Item# 24 Emergency contact information must be available onsite in the Top Doghouse and the Toolpusher s office. Item# 25 Chemicals/containers must be properly labeled. Item# 26 Fixed/portable ladders need to be properly installed/setup. Any damaged ladders either need to be repaired or replaced. Item# 27 All electrical equipment shall be properly guarded with no exposed wires. Prepared by: Updated August 27, 2012 Page 7 of 9
8 Item# 28 All electrical equipment needs to be properly grounded. Item# 29 Window openings in the side of the generator house must not allow an employee to fall through to 4 or more feet to a lower level or ground. Item#30 All hinges on platform gates must be in working condition and free of damage. Item# 31 Make sure that gates on platforms, mud tanks, etc. are closed to prevent employees from being exposed to a fall hazard. Ensure that the Mud Pit Gate is HWD s new design and are opened from ground level with warning chains and signage in place. Prepared by: Updated August 27, 2012 Page 8 of 9
9 Item# 32 Make sure that flexible cords have strain relief to prevent damaged from twisting or bending. Item# 33 All trailers are required to be grounded. Item# 34 Railings on platforms and decks need to be installed and secured at all times. Item# 35 FRC s are required to be worn at all times by all HWD employees on location. Prepared by: Updated August 27, 2012 Page 9 of 9
Superintendent Rig Checklist
Superintendent Rig Checklist Rig #: Operating Company: Well Name & #: Date/Time of Inspection: Inspected By: Company Man: Tool pusher: Driller: Ton Miles Logged and up to date: BOP Drill date and time:
October 03, Steve Smith Safety Director Best Company 1234 Main Street Kansas City, MO General Industry Safety Survey Omaha, NE.
October 03, 2016 Steve Smith Safety Director Best Company 1234 Main Street Kansas City, MO 64555 Re: General Industry Safety Survey Omaha, NE Steve, This report is in follow-up to the safety survey completed
Revision History. 1. PURPOSE To set forth minimum site requirements for the construction, use and maintenance of portable ladders.
No.: WYN032.039 Page: 1 of 6 Preparer: Owner: Approver: EHS Specialist EHS Hub Manager Site Manager Revision History Revision Date Revision Number Nature of Change 5/01 1 Formerly W-39 10/12 2 Reformatted
A. Employees It is each employee s responsibility to inspect ladders for defects before each use.
PAGE 1 OF 5 1.0 PURPOSE/ SCOPE This procedure describes the requirements for safe use, care, storage and inspection of ladders. 2.0 RESPONSIBILITY A. Employees It is each employee s responsibility to inspect
GENERAL HOUSEKEEPING. 1. Are all aisles, passageways, stairways and stairwells kept clear of tools, hoses, and trash?
Inspection Checklist GENERAL HOUSEKEEPING 1. Are all aisles, passageways, stairways and stairwells kept clear of tools, hoses, and trash? 2. Is oil, grease, or other liquids, when spilled on the floor
750HP PORTABLE DRILLING RIG W/ WALKING SYSTEM
750HP PORTABLE DRILLING RIG W/ WALKING SYSTEM PAGE 1 OF 7 DRAWWORKS: TSM 7000 Drawworks, 750hp, grooved f/1-1/8 Drill Line, p/b 540HP CAT C-15, w/allison CLT- 6061 Automatic Transmission, Right Angle Drive,
KSU COLLEGE OF AGRICULTURE FARM HAZARD INSPECTION CHECKLIST
Building & Room(s): PI/Area Supervisor: Inspected By: Date: All laboratory spaces containing hazardous materials must be inspected at least annually by EH&S. Farm self-inspections should be conducted monthly.
FACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY Ladder Safety Policy
FACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY Ladder Safety Policy 11-21-2014 Last Revision 1.0 Intent: This intent of the Ladder Safety Program is to complement the University s Fall
Sand & Gravel, Inc. Job Demands Analysis. Purpose of Activities:
Job Demands Analysis Sand & Gravel, Inc. Company: Thelen Sand & Gravel, Inc. Job Title: Maintenance / Welder Location: Maintenance Shop Classification: Regular Duty Purpose of Activities: The maintenance
ELECTRICAL SAFETY-RELATED WORK PRACTICES
ELECTRICAL SAFETY-RELATED WORK PRACTICES This checklist is provided to assist organizations in reviewing compliance with OSHA Standard 29 CFR 1910.331 through 1010.335. Refer to the complete Standard for
LSU University Safety Manual Section IV, Part C Stairs and Ladders. C. Stairs & Ladders
C. Stairs & Ladders 1. General Requirements a. A stairway or ladder must be provided at all worker points of access where there is a break in elevation of 19 inches (48 cm) or more and no ramp, runway,
CAL/OSHA ELECTRICAL LOW VOLTAGE
Preparation: Safety Mgr Authority: CEO Issuing Dept: Safety Page: Page 1 of 7 Purpose The purpose of this program is to prevent injuries due to electrical exposure to low voltage (less than or equal to
Document Number: HSE May 1, 2014 LADDERS. Author: A Holland. Rev Date Rev # Description Revised By 05/01/14 1 Reformat A.
Document Number: May 1, 2014 LADDERS Author: A Holland Rev Date Rev # Description Revised By 05/01/14 1 Reformat A. Holland A. The purpose of this standard is to ensure the safe use and proper construction,
Rig Specifications Support Capabilities Personnel Qualifications. (a division of Velseis Pty Ltd)
Rig Specifications Support Capabilities Personnel Qualifications (a division of Velseis Pty Ltd) Summary Durable Productive Rigs Field Support Safety Standards Air, Mud or Hammer Drilling Maintenance Schedule
ROTARY TOOLS. Romfor International Ltd. Backup Hand RIGGING UP DRILLING EQUIPMENT & ROTARY TOOLS DRILLING EQUIPMENT
DRILLING EQUIPMENT ROTARY TOOLS Romfor International Ltd. Backup Hand DRILLING EQUIPMENT & ROTARY TOOLS Backup Hand DRILLING EQUIPMENT ROTARY TOOLS 0 PPE Requirements - Hard Hat, Safety Glasses, Work Gloves,
Portable Ladder Safety. Baboquivari Unified School District NO. 40
Portable Ladder Safety Baboquivari Unified School District NO. 40 Agenda Importance of Ladder Safety An Approved Ladder Types of Ladders Stepladders Extension Ladders Controlling Hazards Inspecting the
GUIDELINES FOR THE USE OF SCISSOR LIFTS (ELEVATING WORK PLATFORMS) AND AERIAL BOOM LIFTS (EXTENSIBLE BOOM PLATFORMS)
Building for Tomorrow s Leaders LACCD Program Management 1055 Corporate Center Drive Monterey Park, California 91754 www.build-laccd.org 323.981.7200 tel BuildSafe Safety Bulletin for April 2018 GUIDELINES
Environmental Health and Safety Office
Environmental Health and Safety Office Industrial Powered Trucks/ Forklift Safety August 2011 1.0 Purpose This policy has been developed to establish compliance with OSHA standard 29 CFR 1910.178 for industrial
SECTION SIX MAINTENANCE AND SERVICE INSTRUCTIONS
SECTION SIX MAINTENANCE AND SERVICE INSTRUCTIONS HYDRAULIC STABILIZERS INTRODUCTION INSTALLATION Stabilizer Frame Mounting 6-1 Installing Stabilizer Legs and Cylinders 6-2 Mounting the Control Valve 6-3
OCCUPATIONAL TOOL AND EQUIPMENT LIST
OCCUPATIONAL TOOL AND EQUIPMENT LIST POWERLINE TECHNICIAN Government of Newfoundland Labrador Department of Advanced Education & Skills October 2014 PLTec_10-141_TEList_2014-10 1 Preface This document
Management Plan for Aerial Lifts (ANSI/SLA ) ISD #535
Management Plan for Aerial Lifts (ANSI/SLA 92.3-1990 1926.453) ISD #535 Health & Safety Office Maintenance Service Building 10 SE 9½ Street Rochester, MN 55904 507-328-4507 Modification Date Document Modification
LADDER SAFETY PROGRAM
All ladders at Craven Community College must be constructed and used in accordance with OSHA regulations and ANSI standards. All commercially manufactured ladders must have a label indicating it meets
STANDARDS PRESENTATION Attachment No. 1 TO Page 1 of 6 CALIFORNIA OCCUPATIONAL SAFETY AND HEALTH STANDARDS BOARD
TO Page 1 of 6 TITLE 8: Division 1, Chapter 4, Subchapter 4. Construction Safety Orders Article 12. Pile Driving and Pile Extraction [Notes in italics are editorial notes and generally refer to A10.19
STANDARD PRACTICE INSTRUCTION
STANDARD PRACTICE INSTRUCTION DATE: March 1, 2010 SUBJECT: Ladder Safety Program. REGULATORY STANDARD: 29 CFR 1910.25 Portable Wood Ladders. 29 CFR 1910.26 Portable Metal Ladders. 29 CFR 1926.1052-1060
August 11, Bill Grant President/Owner Best Company 1234 Main St Anywhere, USA General Industry Safety Survey Omaha, NE.
August 11, 2018 Bill Grant President/Owner Best Company 1234 Main St Anywhere, USA 12345 Re: General Industry Safety Survey Omaha, NE Bill, This report is in follow-up to the safety survey completed on
Health & Safety Policy and Procedures Manual SECTION 22 CRANE SUSPENDED PERSONNEL PLATFORMS
SECTION 22 CRANE SUSPENDED PERSONNEL PLATFORMS 1. Scope: This policy and procedure applies to the design, construction testing, use, and maintenance or personnel platforms and hosting of personnel platforms
Operator Manual. This operator manual has. information for all models. of series M plus some. options and accessories. Some of the illustrations
M S E R I E Operator Manual S This operator manual has information for all models of series M plus some options and accessories. Some of the illustrations and information may not The most apply to your
ITEM NO DESCRIPTION STUD CENTER WEIGHT ITEM NO DESCRIPTION STUD CENTER WEIGHT ITEM NO DESCRIPTION STUD CENTER WEIGHT NARROW FRAMES WALK THROUGH FRAMES
NARROW FRAMES Stud Cent e r ITEM NO DESCRIPTION STUD CENTER WEIGHT NF3H-2W NF5H-2W NF6H-2W NF6H-3W 3 H X 2 W 5 H X 2 W 6 4 H X 2 W 6 4 H X 3 W 2 4 4 4 16 LBS 25 LBS 33 LBS 40 LBS WALK THROUGH FRAMES ITEM
ADMINISTRATIVE PRACTICES MANUAL
SAFETY MANUAL : 1.0 Scope and Application This policy is intended to prescribe rules and establish minimum requirements for the care, and use of the common types of ladders, in order to insure safety under
VEHICLE MECHANICS SAFETY RULES, POLICIES, AND PROCEDURES
VEHICLE MECHANICS SAFETY RULES, POLICIES, AND PROCEDURES The following sections provide general guidelines and requirements for vehicle maintenance safety and have been prepared to assist you based on
29CFR 1910 Subpart D Walking-Working Surfaces Ladders
29CFR 1910 Subpart D Walking-Working Surfaces 1910.23 Ladders The following provides some of the applicable definitions, in addition to, a brief checklist which provides guidance and information relating
ESSENTIAL SAFETY RESOURCES
ESSENTIAL SAFETY RESOURCES GS-3029 Originator: Safety Advisor s Signature: Type Name Approval: HSE Manager s Signature: Type Name Approval: Operations Manager s Signature: Type Name Table of Contents PURPOSE...
Chemical Hazards, Biological Hazards, and Harmful Substances
TM 67 Provisions of the Alberta Occupational Health and Safety Code and The Alberta Occupational Health and Safety Regulation Equipment REGULATION 12.2 If a worker is required under the Act to use or wear
BUREAU OF STANDARDS. Effective Date: 8/19/2016 Section No. 4. Version: 1.2 Procedure No. 3
BUREAU OF STANDARDS Effective Date: 8/19/2016 Section No. 4 Version: 1.2 Procedure No. 3 TITLE: LP Gas Bulk Plant Final Inspection PURPOSE: This document details the procedures used to conduct a Final
VP, Facilities and Construction Management
Title: Effective Date: November 2005 Revision Date: January 12, 2017 Issuing Authority: Responsible Officer: VP, Facilities and Construction Management Director Environmental Health and Safety PURPOSE
RUTGERS UNIVERSITY POWERED INDUSTRIAL TRUCK PROGRAM
RUTGERS UNIVERSITY POWERED INDUSTRIAL TRUCK PROGRAM 9/01 1 TABLE OF CONTENTS POWERED INDUSTRIAL TRUCK PROGRAM A. PURPOSE AND SCOPE...1 B. LIFE TRUCK REQUIREMENTS...1 C. AREA REQUIREMENTS...2 D. RESPONSIBILITIES...2
Support and management of this policy. Ensure policy is adhered to by all employees. Follow requirements contained in this policy.
1.0 Scope and Application This policy is intended to prescribe rules and establish minimum requirements for the care, and use of the common types of ladders, in order to insure safety under normal conditions
OilRigsNow.com Houston,TX USA (713)
Current DRAWWORKS: WILSON Mogul Single Drum Drawworks S/N 5131, Lebus Grooved f/ 1-1/8 Line, WILSON Torcair Brake, FOSTER/AMERICAN Catheads, Air Drillers Control Console, Crown-O-Matic. COMPOUND: EMSCO
Ladder Safety Program
Ladder Safety Program For Adopted LC-1022 Rev. 06/16 Page 1 I. Introduction The Organization recognizes that employees use ladders on a regular
SAFE WORK PROCEDURE LOCATION OF WORK WRITTEN BY: APPROVED BY: DATE: LAST REVISION
Page 1 of 5 LOCATION OF WORK WRITTEN BY: APPROVED BY: DATE: LAST REVISION All Schools Lorie Carriere Jason Graham Donna Hancox Gordon Howe April 27, 2010 March 8, 2017 HAZARDS PRESENT Sun burns Muscle
UNION PACIFIC RAILROAD 1 Safety Book Transition Guide July 2, 2013
UNION PACIFIC RAILROAD 1 The following is designed to give a side by side transition between the Union Pacific Safety Rules effective July 30, 2007 and the new rules effective July 2, 2013. Many rules
LAD-series Portable Warehouse Ladders, 6-12 Steps Instruction Manual
Rev. 3/3/07 LAD (6- STEPS), MANUAL VESTIL MANUFACTURING CORP. 999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (60) 665-7586 -or- Toll Free (800) 348-0868 Fax: (60) 665-339 www.vestilmfg.com
LAD-EZ Series Portable Warehouse Ladders, 6-12 Steps Assembly Manual
Rev. 3/3/07 LAD-EZ (6- STEPS), MANUAL Vestil Manufacturing Corp. 999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (60) 665-7586 -or- Toll Free (800) 348-0868 Fax: (60) 665-339 www.vestilmfg.com
AERIAL LIFTS/MAN-LIFTS
AERIAL LIFTS/MAN-LIFTS Aerial lifts are pieces of equipment that many workers can't imagine working without. This equipment, if used correctly, provides quick and safe access to work areas that at one
WORKING AT ELEVATED PLACES. Portable Ladders Standard. Selection and Use
WORKING AT ELEVATED PLACES Selection and Use University workers who require temporary access to elevated or lowered locations are faced with a potential risk of falling. Whenever practicable, this risk
Course 904 Course 816. Oil and Gas Well Inspection
Oil and Gas Well Inspection This page intentionally blank OSHAcademy Course 904 Study Guide Oil and Gas Well Inspection Copyright (c) 2017 Geigle Safety Group Inc. No portion of this text may be reprinted
ANSI Z50.1. Safety Standards
ANSI Z50.1. Safety Standards 5. Dry Ingredient Handling Equipment 5.1 General Requirements 5.1.1 Whenever a dry ingredient handling system is of such size that the beginning of its operation is remote
SAFETY DIRECTIVE 2.0 DEPARTMENTS AFFECTED
SAFETY DIRECTIVE Title: Ladders Issuing Department: Town Manager s Safety Office Effective Date: July 1, 2014 Approved: Gilbert Davidson, Town Manager Type of Action: New 1.0 PURPOSE This procedure has
SECTION 11 POWERED INDUSTRIAL TRUCKS
SECTION 11 POWERED INDUSTRIAL TRUCKS 11.1 Powered Industrial Truck Procedure 11.2 Forklift Inspection 11.3 Operator Performance Evaluation Checklist Revised: May 2009 Updated: November 2017 Reviewed: October
TJC BASE FLOAT INSTRUCTIONS
TJC BASE FLOAT INSTRUCTIONS AS NOT ALL MEMBERS MAY BE PRESENT AT ALL PARADES, THIS MANUAL PROVIDES INSTRUCTIONS FOR RIGGING FOR PARADE AND RIGGING FOR TRANSPORT. IT ALSO PROVIDES PHOTOS AND LOCATIONS OF
HEALTH AND SAFETY MANUAL
HEALTH AND SAFETY MANUAL Title: Ladders (Portable & Fixed) Approved by: Greg Savoy Rev. 4/1/08 1 Purpose/Scope: This section is intended to prescribe rules and establish minimum requirements for the construction,
Monthly Checklist For Depot
Monthly Checklist For Depot ANNEXURE 1.L(iv) TANK FARM Notes : i. The scope covers piping, valve & fittings, general housekeeping, pumps & motors, effluent management, fire protection and security within
THIS PRODUCT IS FOR PROFESSIONAL LABORATORY USE ONLY USER'S MANUAL. WELLS ENGINE UNIT 230 VOLT Product No. U905, U906, U907, U908
DENTAL, INC. TECHNICAL BULLETIN U807-022510 5860 FLYNN CREEK ROAD READ ALL INSTRUCTIONS P.O. BOX 106 BEFORE PROCEEDING COMPTCHE, CALIFORNIA, U.S.A. 95427 SAVE THIS FOR FUTURE REFERENCE THIS PRODUCT IS
Safe Work Instructions Tools and Equipment
Safe Work Instructions Version 1.00! 23 March 2015 Table of Contents PURPOSE AND SCOPE...4 HAND TOOLS...6 ELECTRIC POWER TOOLS...7 PETROL POWERED TOOLS...9 PORTABLE ELECTRICITY GENERATOR...12 PNEUMATIC
New Bremen, Ohio USA 2004 PF14387-WEB Rev. 6/06 Printed in U.S.A.
New Bremen, Ohio 45869 USA 2004 PF14387-WEB Rev. 6/06 Printed in U.S.A. You Must be Trained It s the law, you must be trained and certified to operate this truck. (OSHA 1910.178, Rev. 1999) You or others
Operator Manual. The most important component is you. This operator manual. has information for. all models of series. B plus some options and
Operator Manual This operator manual has information for all models of series B plus some options and accessories. Some of the illustrations and information may not apply to your truck. The most important
Definitions. Exposed part. Live or energized part. De-energized part
Electrical Safety Definitions Exposed part Live or energized part De-energized part 1a Definitions De-energized exposed parts that are not locked/tagged are considered to be energized exposed parts 1b
JARVIS. Model 50G Hydraulic Dehorner
Hydraulic Dehorner EQUIPMENT SELECTION... Ordering No. TABLE OF CONTENTS... Page 50G Dehorner Electric Triggers Offset Blades... 4025011 Cup Blades... 4025047 Air Triggers Offset Blades... 4025025 Cup
Health, Safety, Security and Environment
Document owner and change code Document Owner Aaron Perronne Title HSSE Manager Mark X Change Code Description X N/A First Issue A Typographical/Grammatical correction; formatting change; text clarification-no
JUNGLE WHEELS ASSEMBLY INSTRUCTIONS
JUNGLE WHEELS ASSEMBLY INSTRUCTIONS ITE M NO. 1 PART NUMBER JW- PLATFORM DESCRIPTION QT Y ITE M NO. PART NUMBE R DESCRIPTION JW PLATFORM WELDMENT 1 12 307 10mm HEX FLANGED NUT 4 2 JW-BRACKET Jungle Wheels
LADDER INVENTORY AND INSPECTION RECORD
Instructions: Use this form to generate an inventory of ladders used in your department and to document annual and periodic inspections. Any ladder identified as having structural damage, missing or loose
SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL. SFPM (SM/Min)
3 Wheel Belt Grinder Parts Page Reorder No. PD.36 Effective October 0 SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL Model Number Motor hp FLA Voltage Phase Frequency SFPM (SM/Min) Sound Level Weight Pound
TABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING
TABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING Page DEFINITIONS...7-1 SAFEGUARDS...7-1 GUARDING...7-2 PULLEYS, BELTS AND BELT-SHIFTERS...7-3 CONTROLS...7-3 FLYWHEELS...7-3 GRINDING WHEELS...7-3
Surface Regulations and Policies
Surface Regulations and Policies COAL FATALITIES 1970-2002 350 300 250 200 150 100 50 0 1970 1973 1976 1979 1982 1985 1988 1991 1994 1997 2000 From January 1, 1970 through today, a total of 240 coal miners
EN 131 A GUIDE TO UK LADDER STANDARDS. PART 1. Terms, Types & Functional sizes. PART 2. Testing. PART 3. Marking & User Instructions
EN 131 A GUIDE TO UK LADDER STANDARDS PART 1. Terms, Types & Functional sizes PART 2. Testing PART 3. Marking & User Instructions INTRODUCTION WHAT IS EN131 AND HOW DOES IT AFFECT THE UK? EN131 is a European
USA G-103 Twin Astir
USA G-103 Procedures for safe assembly and dis-assembly of the glider (Trailers 2 and 3) Grob Glider Rigging Tools Required: Needle nosed pliers Wire cutters (side cut) Very large crescent wrench (for
THE UNIVERSITY OF MAINE AT PRESQUE ISLE. Powered Industrial Trucks & other vehicles
THE UNIVERSITY OF MAINE AT PRESQUE ISLE Powered Industrial Trucks & other vehicles General The Powered Industrial Truck Policy applies to the operation of forklifts, pallet jacks, platform-mounted trucks,
OSHA 29CFR 1910 Subpart D Walking-Working Surfaces Content
OSHA 29CFR 1910 Subpart D Walking-Working Surfaces Content 1910.21 Scope and Definitions 1910.22 General Requirements 1910.23 Ladders 1910.21 Scope and Definitions. (a) Scope. This subpart applies to all
SSMP ELEMENT 4 O & M Program APPENDIX 4.3. Sewer Pipe Cleaning Standard Operating Procedures (SOPs)
SSMP ELEMENT 4 O & M Program APPENDIX 4.3 Sewer Pipe Cleaning Standard Operating Procedures (SOPs) City of San Mateo CODE OF SAFE PRACTICES Table of Contents A B C D E F G Air Compressor and Pressure Vessel
City Fleet Safety Policy Example
City Fleet Safety Policy Example This Policy discusses the following items included in City Fleet Safety: Shop Safety Precautions Safety Attire Field Safety Precautions Electronic Accessories Fueling SAFETY
Ladder Safety - Portable and Fixed
SUNY Cortland-Environmental Health and Safety Office Ladder Safety Portable and Fixed Inception Date: January 9, 2007 Latest Revision/Review Date: June 29, 2017 Previous Revision/Review Date: May 5, 2015
ON DEMAND INSTALLATION GUIDE
ON DEMAND INSTALLATION GUIDE PICTOGRAMS Each Signifier displayed here is specific to this User Manual. Menu Previous Advance Note Tip Example Barcode Scanner Rotary Heads Drum & Frame Pump Stations Control
Pump and Tank Unit 438
Pump and Tank Unit 438 Technical Specification Booklet 438 Weatherford. All rights reserved. 1 Contents Weatherford Pump and Tank Unit... 2 Technical Specifications... 4 Engine... 5 Transmission... 5 Axles...
Slump Master III Slump Inspection and Safety Platform for Single & Double Units
VERSION: SM88 G3.20 Inspection and Safety Platform for Single & Double Units Operating and Service Manual *Includes Parts List 2014 C & W Manufacturing and Sales Co. Dear Customer, C & W Manufacturing
Vehicle-mounted elevating and rotating work platforms 29CFR
Vehicle-mounted elevating and rotating work platforms 29CFR1910.67 Purpose The bucket truck safety training program is intended to help prevent accidents, injuries, and fatalities that may be caused by
BP-Husky Refinery Toledo, OH
BP-Husky Refinery Toledo, OH Document Type: Procedure Refinery Wide Procedure No.: SAF 095 Effective Date: 2/25/16 Owner: D. Clark Working on or near Energized Electrical Equipment Rev. No.: 6 Auth. By:
Electrical Safety. Electrical Safety Webinar. Electrical. Printing Industries Alliance Printing Industries Alliance 1
Webinar 1 Electrical 2 1 Webinar Introduction An average of one worker is electrocuted on the job every day There are four main types of electrical injuries: Electrocution (death due to electrical shock)
WIRING DESIGN & PROTECTION REQUIREMENTS CHECKLIST
WIRING DESIGN & PROTECTION REQUIREMENTS CHECKLIST Use & Identification of Grounded and Grounding Conductors YES NO N/A Grounded conductors are identifiable and distinguishable from all other conductors.
Technical Publications AWP. Operator's Manual. Fourth Edition, First Printing Part No
Technical Publications AWP Operator's Manual Fourth Edition, First Printing Part No. 424 Operator s Manual Fourth Edition Important Read, understand and obey these safety rules and operating instructions
HitchHoist Assembly & Operating Instructions IMPORTANT NOTICE
HitchHoist Assembly & Operating Instructions IMPORTANT NOTICE FAILURE TO READ AND COMPLY WITH THE INSTRUCTIONS PRINTED IN THIS MANUAL COULD RESULT IN SERIOUS INJURY! IT IS STRONGLY RECOMMENDED THAT PERSONNEL
440/880LB ELECTRIC HOIST STF-4488EH
ELECTRIC HOIST 440/880LB WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
OSHA Update. Electric Power Generation, Transmission and Distribution Standard (Part 1910 & 1926)
OSHA Update Electric Power Generation, Transmission and Distribution Standard (Part 1910 & 1926) 5/14/2014 Significant Changes to the Standards General Training Host Employer & Contractor Responsibilities
BUCKET TRUCK SAFETY EQUIPMENT
BUCKET TRUCK SAFETY EQUIPMENT Phone Number 800.222.4664 General Safety Guidelines - Safe Use of Bucket Trucks, Aerial Lifts) (Per OSHA Standard 1910.67, 1926.453) Definitions: An aerial device, by definition,
SECTION V ASSEMBLY CAUTION THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD BEFORE ATTEMPTING MACHINE ASSEMBLY.
SECTION V ASSEMBLY CAUTION THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD BEFORE ATTEMPTING MACHINE ASSEMBLY. 1. Wear personal protective equipment such as, but not limited to protection
2014 PRODUCT CATALOG
2014 PRODUCT CATALOG www.iascustom.com 1-800-388-6884 WE DESIGN DURABLE, SAFE, LIGHTWEIGHT ACCESS PRODUCTS FOR COMMERCIAL AND RECREATIONAL USE, MAKING YOUR DAILY OPERATIONS MORE EFFICIENT. TRUCKER SERIES
PRODUCT MANUAL TILE CUTTING MACHINE. . Operation. Parts List and Diagram SPECIFICATIONS CAUTION:
FLORCRAFTT TM PRODUCT MANUAL SKU NUMBER 709-4242 SERIAL NUMBER: CAUTION: FOR YOUR OWN SAFETY READ INSTRUCTION MANUAL COMPLETELY AND CAREFULLY BEFORE OPERATING THIS 7 TILECUTTING MACHINE SPECIFICATIONS
Trailer Jack. Model Assembly and Operating Instructions
Trailer Jack Model 37792 Assembly and Operating Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 1998 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork
Dock Equipment $ The RIGHT choice for:
The RIGHT choice for: + RIGHT PRODUCT! 40,000+ quality products from leading manufacturers + RIGHT QUALITY! 3+ year guarantee + RIGHT ON TIME! 1 3 day delivery of in-stock products Dock Equipment 8 Dock
Safe Operating Procedure LADDER - Single
Safe Operating Procedure LADDER - Single DO NOT use this equipment unless you have been instructed in its safe use and operation and given prior permission. PERSONAL PROTECTIVE EQUIPMENT Welds are intact.
before serial number 2214
before serial number 2214 Contents Page Safety Rules... 3 Pre-operational & Safety Inspection... 4 Operating Instructions... 6 Transport... 12 Maintenance & Routine Service... 12 Specifications... 14 SAFETY
Ladders. Meeting Objectives. Introduction/Overview. General Hazards. OSHA Regulations and Frequent Violations
Ladders Meeting Objectives To explain the proper selection, use, and maintenance of portable ladders. The result should be closer inspection of ladders and greater awareness of how to use them safely.
Forklift Safety Plan Contents: Forklift Safety Plan
Forklift Safety Plan Contents: Forklift Safety Plan Introduction... ii Plan Cover Sheet... 1 Purpose... 2 Supervisory Responsibilities... 2 Maintenance, Fueling, and Repair... 3 General Rules for Operator
Operating instructions for Little Giant SkyScraper Telescoping A-frame ladder.
22 Operating instructions for Little Giant SkyScraper Telescoping A-frame ladder. I. Description - SkyScraper Telescoping A-Frame Ladder A. Three basic components -The ladder is a telescoping A-frame unit
LADDER SAFETY PROGRAM
LADDER SAFETY PROGRAM 1.0 PURPOSE This program applies to employees, visitors and contractors (persons/persons) for the purpose of providing requirements necessary to prevent equipment misuse and fall
Work Platforms. Operators Manual Warning Stickers ANSI Standards. ( Model # MWP 4x4 ) ( Model # MWP 4x6 ) ( Model # MWP 4X8 ) ( Model # MWP 4x116 )
Work Platforms ( Model # MWP 4x4 ) ( Model # MWP 4x6 ) ( Model # MWP 4X8 ) ( Model # MWP 4x116 ) Operators Manual Warning Stickers ANSI Standards Marv Haugen Enterprises 1851 Heartland Ave. 1851 Heartland
1. Cranes. 3. Hazardous Chemicals. 4. Signs. 2. Trenching and Excavations
A Safe Operation Safety Tips for Heavy Construction 1. Cranes Cranes are a common piece of equipment on heavy construction jobsites. Always perform a walk around inspection before and after each shift
1 Clearheart Construction Co., Inc. Mobile Crane - Onshore MOBILE CRANES Cranes and derricks
Mobile Crane - Onshore MOBILE CRANES Cranes and derricks. - 1926.550 Cranes, like all pieces of heavy equipment, if not properly operated, inspected and maintained have a potential for causing major bodily
Health & Safety Policy and Procedures Manual SECTION 15 LADDERS
SECTION 15 LADDERS 1. LADDERS A. OSHA References: 29 CFR 1926.1053 (Ladders) B. General: Falls are the second leading cause of all accidents following motor vehicle accidents? Annually, more than 30,000
HANDLING BIG BALES SAFELY
HANDLING BIG BALES SAFELY PRE-HARVEST PRECAUTIONS Those big round bales weigh 1,000 to 2,000 pounds. Developing safety awareness begins with the operator's manual. Take time to read through it when the
The inner and outer side rails are made of aircraft grade aluminum.
Description - Titan Multifunctional Ladder Unit - comprised of three basic components - an inner ladder unit assembly and two outer unit assemblies which telescope over the inner. 1. The inner ladder assembly