Inline Inspection Technology Overview
|
|
- Samson Leonard
- 5 years ago
- Views:
Transcription
1 Inline Inspection Technology Overview Jason M Matocha Technical Representative Jason.Matocha@tdwilliamson.com 11/12/ Registered trademarks of T.D. Williamson, Inc. in the United States and in foreign countries. Copyright 2014, T.D. Williamson, Inc. All rights reserved. The distribution of this document beyond the intended recipients in whole or in parts is strictly prohibited.
2 References API 1160 NACE SP API 1163
3 API 1160
4 ILI Technology Overview Caliper High Resolution Geometry Axial MFL Circumferential MFL Helical MFL Residual Field or Low Field MFL Inertial Mapping/XYZ Combination Technology UT Wall Thickness UT Crack Detection EMAT
5 Caliper Low Resolution geometry and bore measurement technology. Optimal tool speed 3-5mph.
6 Caliper Integrity Assessment Dents and bends (detect and size) Low resolution geometry technology primarily used for New Construction inspections. Optimal tool speed 3-5mph. Gas or Liquid pipelines
7 High Resolution Geometry
8 High Resolution Geometry Dents, bends, wrinkles, buckles, expanded pipe, and evidence of strain. (Detect and Size) Tool Speed 3-5 mph Gas or Liquid pipelines. 3 to 56.
9 High Resolution Geometry Estimated WT = ( ) (9.53mm) (7.93mm) (6.35mm)
10 High Resolution Geometry
11 Axial MFL Axial Field ***Magnetic field orientation plays a key role in detection, identification and sizing.**
12 Axial MFL Integrity Assessment Metal Loss internal or external. (Detect and Size) Dents, Wrinkles, Laminations and Bends. (Detect) Gas and Liquid pipelines
13 Axial MFL
14 Circumferential MFL (Transverse Field) Circumferential Field
15 Circumferential MFL (Transverse Field) Integrity Assessment Metal Loss internal or external. (Detect and Size) Selective Seam corrosion external and/or internal. (Detect) Axially oriented crack like manufacturing defects. i.e. hook cracks, etc. (Detect) Dents, wrinkles, laminations and bends. (Detect) Gas and Liquid pipelines
16 Helical MFL (Spiral Field)
17 Helical MFL (Spiral Field) Integrity Assessment Metal Loss internal or external. (Detect and Size) Selective Seam corrosion external and/or internal. (Detect) Axially oriented crack like manufacturing defects. i.e. hook cracks, etc. (Detect) Dents, wrinkles, and laminations. (Detect) Gas and Liquid pipelines. 6-30
18 Residual or Low Field MFL Integrity Assessment Hard Spots (Detect). Strain (Detect). Gas and Liquid pipelines
19 Combination Technologies Combine different technologies to allow for a standalone tool run (4-56 ). Tool Speed 3-5 mph. Gas or Liquid pipelines.
20 Combination Technology (GEO+Axial MFL)
21 Inertial Mapping/ XYZ Evidence of strain, bends and curvatures. (Detect and Size) Tool Speed 3-5 mph. Sub meter coordinates of pipeline features (valves, etc.) and anomalies (corrosion, dents, etc.). Gas or Liquid pipelines.
22 Inertial Mapping/ XYZ
23 Ultrasonic Wall Thickness Induces normal beam UT into pipe wall. Liquids only or needs to be run in a batch of diesel or water. Pipeline needs to be very clean and tool speed needs to be 1-3mph
24 Ultrasonic Wall Thickness Integrity Assessment Metal loss internal and external. (Detect and Size) Narrow axial external corrosion. (Detect and Size) Laminations. (Detect and Size) Dents, wrinkles and bends. (Detect).
25 Ultrasonic Crack Detection Induces signal into the pipe at a variety of angles. Pipeline needs to be very clean and tool speed needs to be 1-3mph. Liquids pipelines only or needs to be run in a batch of diesel or water
26 Ultrasonic Crack Detection Integrity Assessment Metal loss internal and external. (Detect) Selective seam weld corrosion. (Detect and Size) Axially oriented SCC, stress fatigue cracks, cracks and crack like manufacturing defects.(detect and Size). Narrow axial external corrosion. (Detect and Size) Laminations. (Detect and Size) Dents, wrinkles and bends.(detect)
27 EMAT Electro Magnetic Acoustic Transducer Pipeline needs to be very clean and a optimal tool speed around 1-3mph. External and internal corrosion, selective seam weld corrosion, axially oriented crack like defects, dents, etc. (Detect) Axially oriented SCC, cracks and hard spots. (Detect and Size) Gas and Liquids Pipelines
28 Questions Registered trademarks of T.D. Williamson, Inc. in the United States and in foreign countries. Copyright 2014, T.D. Williamson, Inc. All rights reserved. The distribution of this document beyond the intended recipients in whole or in parts is strictly prohibited.
ADVANCE INSPECTION TECHNOLOGIES APPLIED TO THE GAS INDUSTRY Mar del Plata Octubre 2012
ADVANCE INSPECTION TECHNOLOGIES APPLIED TO THE GAS INDUSTRY Mar del Plata Octubre 2012 LEADING IN INSPECTION TECHNOLOGIES Ruben Bermudez Rosen Europe BV Introduction In-Line Inspection of gas pipelines
More informationPIPELINE PIGS types of mechanical pigs. Pig length (inches) = 1 and ½ pipeline diameters.
PIPELINE PIGS A cleaning pig is any free traveling cleaning device that is sent through a pipeline by product flow to scrape and brush foreign deposits, rust and dirt and fluids from the inside surface
More informationJoint Technical Meeting
Joint Technical Meeting Development in the Assessment and Management of Pipeline Dents and Mechanical Damage: Putting Research into Practice By: SC Rapp and GT Vervake (Presenter) Spectra Energy AD Batte
More informationClient Success Story Sheri Baucom Senior Advisor II
Client Success Story - 2017 Sheri Baucom Senior Advisor II Overview The following is a description of an actual project completed in 2016 where RCP was deployed onsite to validate a pressure test using
More informationA new approach to the results of internal inspection
> CEPS designed and manufactured this temporary traps for a inspection tool run. > by: Aleš Brynych, CEPS a. s. & Alexandrs Jelinskis, LatRosTrans Ltd A new approach to the results of internal inspection
More informationDACON INSPECTION SERVICES I PIPESURVEY INTERNATIONAL MFL INSPECTION OF PIPELINES
I PIPESURVEY INTERNATIONAL MFL INSPECTION OF PIPELINES DACON AND INLINE INSPECTION Dacon well-known for UT based inline inspection UT tools provide unrivaled inspection accuracy. Wide variety of pipelines
More informationINSPECTION TECHNIQUE FOR BWR CORE SPRAY THERMAL SLEEVE WELD
More Info at Open Access Database www.ndt.net/?id=18479 INSPECTION TECHNIQUE FOR BWR CORE SPRAY THERMAL SLEEVE WELD ABSTRACT J.L. Fisher, G. Light, Jim Crane, Albert Parvin, Southwest Research Institute,
More informationUNDERSTANDING THE RESULTS OF AN INTELLIGENT PIG INSPECTION. By Roland Palmer-Jones, Penspen Integrity, Newcastle-upon-Tyne, UK
UNDERSTANDING THE RESULTS OF AN INTELLIGENT PIG INSPECTION By Roland Palmer-Jones, Penspen Integrity, Newcastle-upon-Tyne, UK Introduction Intelligent pigs are used extensively for inspecting pipelines.
More informationPIPELINE REPAIR OF CORROSION AND DENTS: A COMPARISON OF COMPOSITE REPAIRS AND STEEL SLEEVES
Proceedings of the 2014 10th International Pipeline Conference IPC2014 September 29 - October 3, 2014, Calgary, Alberta, Canada IPC2014-33410 PIPELINE REPAIR OF CORROSION AND DENTS: A COMPARISON OF COMPOSITE
More informationRobotic Inspection of Unpiggable Piping at Pump Station
Robotic Inspection of Unpiggable Piping at Pump Station by Steve Lacatena 1 and Jonathan Minder 2 1 Alyeska Pipeline Service Co, Anchorage, AK, USA 2 Diakont, San Diego, CA USA Unpiggable Pipeline Solutions
More informationUltrasonic Production Monitoring of Small Diameter ERW Pipes
11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6-10, 2014, Prague, Czech Republic Ultrasonic Production Monitoring of Small Diameter ERW Pipes Mirek Macecek, Pavel Vraj Techno
More informationUKOPA DENT ASSESSMENT ALGORITHMS: A STRATEGY FOR PRIORITISING PIPELINE DENTS
Proceedings of the 8 th International Pipeline Conference IPC2010 September 27 th - October 1 st, 2010, Calgary, Alberta, Canada IPC2010-31588 UKOPA DENT ASSESSMENT ALGORITHMS: A STRATEGY FOR PRIORITISING
More informationMethodologies and practices for non-piggable lines Andreas Landsteiner Integrity Department - Transalpine Pipeline (TAL)
Methodologies and practices for non-piggable lines Andreas Landsteiner Integrity Department - Transalpine Pipeline (TAL) COPEX 2010 Brussels 1 Presentation overview (1) What are non-piggable lines? (2)
More informationREPAIR OF DENTS SUBJECTED TO CYCLIC PRESSURE SERVICE USING COMPOSITE MATERIALS
Proceedings of IPC2010 8th International Pipeline Conference September 27 October 1, 2010, Calgary, Alberta, Canada REPAIR OF DENTS SUBJECTED TO CYCLIC PRESSURE SERVICE USING COMPOSITE MATERIALS IPC2010-31524
More informationAlgeria, November 2016
Advanced Non-Destructive Testing for Tanks and Pipelines Algeria, November 2016 Params. K Details of Selected Advanced NDT Techniques On-Line Inspection What is On-Line Inspection? Check the Mechanical
More informationEXAMINATION OF NOZZLE INNER RADIUS AND PIPING FROM THE OUTER SURFACE
More Info at Open Access Database www.ndt.net/?id=18560 ABSTRACT NEW DEVELOPMENTS FOR AUTOMATED NOZZLE INNER RADIUS AND PIPING INSPECTIONS D. Eargle,WesDyne International, USA WesDyne has recently engaged
More information760 Tapping Machine. Features
760 Tapping Machine Sizes: 3- to 16-inch Model 760C Bulletin No: 1000.006.11 Version: 12.2017 Cross Indexing No: n/a Supersedes: 1000.00610 (06.2015) Model 760C Tapping Machines can be either air or hydraulically
More informationTRAINSAFE SAFE INFRASTRUCTURE WORKSHOP DEMONSTRATION OF THE RESEARCH CLUSTER MECHANISM FOR INSPECTION TECHNOLOGIES
TRAINSAFE SAFE INFRASTRUCTURE WORKSHOP DEMONSTRATION OF THE RESEARCH CLUSTER MECHANISM FOR INSPECTION TECHNOLOGIES STAGE 1 ISSUE HIGHLIGHTED IN THE STATE OF THE ART REPORT This resulted in the topic of
More informationTSC INSPECTION SYSTEMS
TSC INSPECTION SYSTEMS APPLICATIONS OF ACFM IN THE RAIL INDUSTRY ACFM was originally developed for use in the oil and gas industry as a technique for detecting and sizing surface-breaking defects with
More informationOVERALL INSPECTION AND INTEGRITY ASSESSMENT OF OIL AND OIL PRODUCTS STORAGE TANKS R.S.
OVERALL INSPECTION AND INTEGRITY ASSESSMENT OF OIL AND OIL PRODUCTS STORAGE TANKS R.S. Gaspariants., G.A. Giller (JSC VNIIST, RUSSIA) L.Y. Mogilner., Y.Y. Semin (CJSC VNIIST-Diagnostika, RUSSIA) Steel
More informationDetection and evaluation of rail defects with nondestructive
19 th World Conference on Non-Destructive Testing 2016 Detection and evaluation of rail defects with nondestructive testing methods Anika DEY 1, Jochen KURZ 2, Lukasz TENCZYNSKI 3 1 DB Systemtechnik GmbH
More informationULTRASONIC TESTING OF RAILWAY AXLES WITH PHASED ARRAY TECHNIQUE EXPERIENCES DURING OPERATION
ULTRASONIC TESTING OF RAILWAY AXLES WITH PHASED ARRAY TECHNIQUE EXPERIENCES DURING OPERATION W. Hansen 1, H. Hintze 2 1 GE Inspection Technologies, Hürth, Germany; 2 Deutsche Bahn AG, Kirchmöser; Germany
More informationComprehensive Management of Hydrocarbon Storage Tanks Ageing
ECNDT 2006 - Fr.2.2.2 Comprehensive Management of Hydrocarbon Storage Tanks Ageing Vincent LESUEUR, Mathieu RIETHMULLER, Daniel CHAUVEAU, IS Services, France Abstract. Corrosion generates considerable
More information860 Tapping Machine. Features
860 Tapping Machine Tapping Sizes: 4- to 20-inches Model 860B Bulletin No: 1000.008.07 Version: 12.2017 Cross Indexing No: n/a Supersedes: 1000.008.06 (8.2016) Split Frame Boring Bar Description Features
More informationStorage Tank Management
Storage Tank Management Background Any Oil terminal, production or petrochemical company handling thousands of barrels of crude oil or other liquid product per day needs to ensure that there is continuity
More informationDrill Collars. Drill collars from VAM Drilling are available with the following features:
73 Drill Collars Drill collars are thick-walled tubular pieces machined from solid steel bars, forming a component of the bottom hole assembly that provides weight-onbit for improved drilling performance.
More informationVW Strain Gauge Spot Weld VWS-2020 Series
DATASHEET VW Strain Gauge Spot Weld VWS-2020 Series Designed primarily to measure strains on the surface of steel structures but may also be used on other types of material Overview APPLICATIONS Measurement
More informationtechnical description:
The steel flanged and welded swing check valves are the pipeline valves, preventing automatically a working medium from the back flow. They are used for: - noncorrosive fluids - water - steam - oil - petroleum
More informationChapter 11 Rolling Contact Bearings
Chapter 11 Rolling Contact Bearings 1 2 Chapter Outline Bearing Types Bearing Life Bearing Load Life at Rated Reliability Bearing Survival: Reliability versus Life Relating Load, Life, and Reliability
More informationRELIABILITY IMPROVEMENT OF ACCESSORY GEARBOX BEVEL DRIVES Kozharinov Egor* *CIAM
RELIABILITY IMPROVEMENT OF ACCESSORY GEARBOX BEVEL DRIVES Kozharinov Egor* *CIAM egor@ciam.ru Keywords: Bevel gears, accessory drives, resonance oscillations, Coulomb friction damping Abstract Bevel gear
More informationMagnetic Particle Inspection on train components
11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6-10, 2014, Prague, Czech Republic More Info at Open Access Database www.ndt.net/?id=16515 Magnetic Particle Inspection on train
More informationType B (Extruded Branch) Sizes 4 through 30
STOPPLE Fittings & Reduced Branch Split Tees, Sizes 4-inch and Larger Bulletin No: 1100.001.05 Date: July 2008 Cross Indexing No: n/a Supersedes: 1100.001.04 (07/06) Typical Tapping Setup For Plugging
More informationEnbridge Gas Transmission and Midstream and Enbridge Liquid Pipelines (Express-Platte) Contractor Covered Task List Last updated 8/30/2018
001 Provide Security for Pipeline Facilities 195.436 Oral 003 Test Breakout Tank Overfill Protective Devices 195.428 Oral 004 Inspect and Calibrate Breakout Tank Overfill Protective Devices 195.428 Oral
More informationTittel. Unique technology for 3D integrity monitoring of subsea pipelines av Navn. Trond Olsen President, ClampOn, Inc.
Tittel Unique technology for 3D integrity monitoring of subsea pipelines av Navn Well and Subsea Integrity Workshop October 26, Rio de Janeiro Trond Olsen President, ClampOn, Inc. From the start... WE
More informationFUNDAMENTAL SAFETY OVERVIEW VOLUME 2: DESIGN AND SAFETY CHAPTER E: THE REACTOR COOLANT SYSTEM AND RELATED SYSTEMS
PAGE : 1 / 13 4. PRESSURISER 4.1. DESCRIPTION The pressuriser (PZR) is a pressurised vessel forming part of the reactor coolant pressure boundary (CPP) [RCPB]. It comprises a vertical cylindrical shell,
More informationAIRWORTHINESS DIRECTIVE. Date: 18 December 2013 SUPERSEDED
EASA AIRWORTHINESS DIRECTIVE AD No.: 2013-0301 Date: 18 December 2013 Note: This Airworthiness Directive (AD) is issued by EASA, acting in accordance with Regulation (EC) No 216/2008 on behalf of the European
More informationSUFA WEDGE GATE VALVES CLASS 150/300/600/900/1500/2500 SUFA TECHNOLOGY INDUSTRY CO. LTD., CNNC
SUFA WEDGE GATE VALVES CLASS 150/300/600/900/1500/2500 SUFA TECHNOLOGY INDUSTRY CO. LTD., CNNC INTRODUCTION Gate valves as shut off valves are used in the industrial area most commonly today. They are
More informationCondition Assessment of Large Diameter Mains
Condition Assessment of Large Diameter Mains Bethany McDonald Northern California Pipe Users Group December 14, 2010 Solutions for Sustainable Infrastructure Outline Pipe materials PCCP Metallic Leak detection
More informationCharacterization and assessment of laminations
Characterization and assessment of laminations CONCAWE - OPMG Brussels - April 2014 Characterization and assessment of laminations 1. About CLH 2. Laminations 3. CLH s ILI campaign and results 4. Research
More informationSECTION 7 - SUSPENSION
For Arctic Cat Discount Parts Call 606-678-9623 or 606-561-4983 SECTION 7 - SUSPENSION 7 TABLE OF CONTENTS Front and Rear Suspension Assembly Schematics... 7-2 Shock Absorbers... 7-2 Swing Arm... 7-5 Front
More informationARI 300 Tank Car and Underframe Structural Inspection Bulletin
Overview The information contained in this inspection bulletin fundamentally explains the inspection, test and acceptance criteria for the structural integrity of the ARI 300 design stub sill series of
More informationARTICLE 5 ULTRASONIC EXAMINATION METHODS FOR MATERIALS
ARTICLE 5 ULTRASONIC EAMINATION METHODS FOR MATERIALS 04 T-510 SCOPE This Article provides or references requirements, which are to be used in selecting and developing ultrasonic examination procedures
More informationTEST REPORT. Ceram Reference: (QT21489/2/SL)/Ref: 1.0A. Tensile and Frictional Tests on the Fast Fit BeamClamp Systems.
TEST REPORT Ceram Reference: 121557 (QT21489/2/SL)/Ref: 1.0A Project Title: Tensile and Frictional Tests on the Fast Fit BeamClamp Systems Client: Kee Safety Limited For The Attention of: Mr Phil Higgs
More informationAccurate Load & Position Measurement Is Critical to Quality Dynamometer Analysis
11 th Annual Sucker Rod Pumping Workshop Renaissance Hotel Oklahoma City, Oklahoma September 15-18, 2015 Accurate Load & Position Measurement Is Critical to Quality Dynamometer Analysis Anthony Allison
More informationPipeline Technology Conference 2007 INSPECTION OF NON-PIGGABLE PIPELINES USING ULTRASONIC PIGLET TECHNOLOGY. L.J. Gruitroij.
INSPECTION OF NON-PIGGABLE PIPELINES USING ULTRASONIC PIGLET TECHNOLOGY. L.J. Gruitroij Synopsis In this paper the following topics are covered. Development of on-line inspection of non-piggable pipelines
More informationDistributed by: Interprovincial Corrosion Control Co. Ltd. 930 Sheldon Court Burlington, Ontario L7L 5K6 Telephone: (905) Fax: (905) 333
Distributed by: Interprovincial Corrosion Control Co. Ltd. 930 Sheldon Court Burlington, Ontario L7L 5K6 Telephone: (905) 634 7751 Fax: (905) 333 4313 Website: www.rustrol.com Pigs Unlimited, Inc. manufactures
More informationInspection Report. Inspection of 20 Gasoline Loading line. Client: Date: 2003/08/12
Project: Inspection of 20 Gasoline Loading line Client:... Date: 2003/08/12 OPTIMESS Engineering GmbH Gewerbepark Keplerstrasse 10-12 07549 Gera Germany Inspection Report Contents 1. Introduction... 1
More informationThe Geometry of Involute Gears
The Geometry of Involute Gears J.R. Colbourne The Geometry of Involute Gears With 217 Illustrations Springer-Verlag New York Berlin Heidelberg London Paris Tokyo J.R. Colbourne Department of Mechanical
More informationLatest Advancements in DrillString Mechanics
Services, Trainings, Softwares Latest Advancements in DrillString Mechanics SPE Gulf Coast Section 03/09/2016 Stephane Menand, Ph.D. stephane.menand@drillscan.com 1 DrillScan Intro Directional Drilling
More informationHOT TAPPING & PLUGGING SOLUTIONS
HOT TAPPING & PLUGGING SOLUTIONS STOPPLE Plus System Combined with a LOCK-O-RING Plus completion plug, the STOPPLE Plus fitting reduces installation time, simplifies the setting process, and eliminates
More informationDynamometer Data Acquired When Polished Rod is Bending or Misaligned
4 th Annual Sucker Rod Pumping Workshop Hilton North Hotel, Houston, Texas September 9 12, 2008 Dynamometer Data Acquired When Polished Rod is Bending or Misaligned Lynn Rowlan Common Types of Portable
More informationPIPELINE INSPECTION SURVEY QUESTIONNAIRE
ARKA PETROGAS PIPELINE PIPELINE INSPECTION SURVEY QUESTIONNAIRE Project: PipeLine Name: ARKALINE Proj. No.:.. Please complete questionnaire as accurate as possible. Phone: +98 21-65611626 Fax: +98 21-65611627
More informationIDENTIFYING DISC COUPLING FAILURES COUPLING FUNDAMENTALS
IDENTIFYING DISC COUPLING FAILURES While couplings are designed for infinite life, they must be operated within their intended design limits in order to achieve optimal performance. Due to installation
More informationDefect Monitoring In Railway Wheel and Axle
IJR International Journal of Railway, pp. 1-5 The Korean Society for Railway Defect Monitoring In Railway Wheel and Axle Seok-Jin Kwon, Dong-Hyoung Lee *, and Won-Hee You * Abstract The railway system
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17579-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 07.07.2017 to 06.07.2022 Holder of certificate: gammatest
More informationImproving the Quality of NDT in the Rail Sector through the Introduction of Advanced Technologies and NDT Means
More Info at Open Access Database www.ndt.net/?id=15123 Improving the Quality of NDT in the Rail Sector through the Introduction of Advanced Technologies and NDT Means O. Iurchenko 8 Naberezhno-Lugova
More informationHigh-Speed Ultrasonic Testing of ERW Pipes
19 th World Conference on Non-Destructive Testing 2016 High-Speed Ultrasonic Testing of ERW Pipes W.A.K. DEUTSCH 1, M. JOSWIG 1, R. KATTWINKEL 1, H. HARMUTH 1 1 KARL DEUTSCH Prüf- und Messgerätebau GmbH
More informationtechnical description:
The gate valves are used as the closing valves for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products Operating parameters are in accordance with the standard ASME
More informationIntroduction to Propipe Limited
Introduction to Propipe Limited Propipe manufactures and supplies a wide range of pipeline pigs and pipeline plugs to leading offshore and onshore companies throughout the world. Our pig-supply scope covers
More informationNew Robotic Technologies for Inspecting Two Pole Electric Generators while the Rotor Remains in Place
Journal of Power and Energy Engineering, 2015, 3, 123-127 Published Online April 2015 in SciRes. http://www.scirp.org/journal/jpee http://dx.doi.org/10.4236/jpee.2015.34018 New Robotic Technologies for
More informationTHE APPLICATION OF LONG RANGE GUIDED ULTRASONICS FOR THE INSPECTION OF RISER PIPES
THE APPLICATION OF LONG RANGE GUIDED ULTRASONICS FOR THE INSPECTION OF RISER PIPES J. McGregor, B. Nooteboom, N. Ivory PTAS-ITS Lot 1 and 2 Tapak Perindustrian Pekan Belait, Jalan Setia Di-Raja, Kuala
More informationPressure Vessel Assessment Report
Project Information Client: Total Energy Location: Blackwell OK Date: 7/23/2013 Contact: Integrity Mgmt. Advisor: Chuck Easterbrooks - API 510 #2212 Cc: API / UT Inspector: Robert Van Pelt-API 510# 40899
More informationThe Alternative to the In-Line Inspection Exists
The Alternative to the In-Line Inspection Exists Vladimir Mokshanov, Rezayat Pipelines Company Ltd. A technology for a non-contact (from the Earth surface) magnetic diagnostics of pipelines is developed
More informationFLANGE. Flanges used for
FLANGE FLANGE Flanges with rating class designations 150, 300, 400, 600, 900, 1500, and 2500 in sizes NPS 1 2 through NPS 24 ASME B16.5: Pipe Flanges and Flanged Fittings (NPS 24 ) ASME B16.47: NPS 26
More informationMULTICHANNEL ULTRASONIC FLOW METER AFLOWT UF
MULTICHANNEL ULTRASONIC FLOW METER AFLOWT UF VERSION UF-5xx d INSTALLATION MANUAL ISO 9001:2008 CONTENTS Page INTRODUCTION... 3 1. SAFETY INSTRUCTIONS... 4 2. MOUNTING PREPARATION... 4 3. MOUNTING REQUIREMENTS...
More informationUnderstanding the Inspection Process for Owners and Operators
Underground Storage Tanks (UST s) Metal Integrity and Lining Inspections Understanding the Inspection Process for Owners and Operators Presented By: Robert L. McChan II General Manager/Senior Project Manager/Steel
More informationBAMBI BUCKET (ALL MODELS) QUICK REPAIR GUIDE 2014 VERSION B
BAMBI BUCKET (ALL MODELS) QUICK REPAIR GUIDE 2014 VERSION B BAMBI BUCKET REPAIR QUICK GUIDE - Version B Issue Date: June 2014 PLEASE READ BEFORE USING. SEI INDUSTRIES LTD. 7400 Wilson Avenue Delta, B.C.
More informationSizes: 3- through 12-inch Model 660b. Features
660 Tapping Machine Sizes: 3- through 12-inch Model 660b Bulletin No: 1000.005.03 Date: April 2011 Cross Indexing No: n/a Supersedes: 1000.005.02 (02/10) Model 660B Tapping Machines can be either air or
More informationNGINEERING. Level 3 NVQ Diploma in. Mechanical Manufacturing Engineering. Qualification Specification. Issue 1.1
1 www.eal.org.uk Level 3 NVQ Diploma in NGINEERING Mechanical Manufacturing Engineering Qualification Specification Overview A qualification designed to cover the skills and knowledge of a wide variety
More informationFatigue properties of railway axles: new results of full-scale specimens
Fatigue properties of railway axles: new results of full-scale specimens Steven Cervello Lucchini RS, Italy TC24 Meeting Advances in: Axle Durability Analysis and Maintenance Politecnico di Milano 1-2
More informationThe globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam
The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products The Characteristics of working conditions: pressure dependency on
More informationFigures T Basic Calibration Block T Straight Beam Calibration Blocks for Bolting
A02 ARTICLE 5 T-510 Scope... 102 T-520 General... 102 T-521 Basic Requirements... 102 T-522 Written Procedure Requirements... 102 T-530 Equipment... 102 T-531 Instrument... 102 T-532 Search Units... 102
More informationBlade Testing. In production
Blade Testing In production Blade Testing Your partner in blade testing in production Wind turbine blades are highly sophisticated products, composed of a variety of materials and composites. During operational
More informationNoble Energy Contractor Covered Task List Last updated 2/20/2019
003 Test Breakout Tank Overfill Protective Devices 195.428 Oral 004 Inspect and Calibrate Breakout Tank Overfill Protective Devices 195.428 005 Repair Breakout Tank Overfill Protective Devices 195.428
More informationASSESSING THE USE OF COMPOSITE MATERIALS IN REPAIRING MECHANICAL DAMAGE IN TRANSMISSION PIPELINES
Proceedings of IPC2006 6th International Pipeline Conference September 25-29, 2006, Calgary, Alberta, Canada IPC2006-10482 ASSESSING THE USE OF COMPOSITE MATERIALS IN REPAIRING MECHANICAL DAMAGE IN TRANSMISSION
More informationWye Connector. GT Exhaust Accessories Installation and Operation Manual. Rev. A. (c) Copyright 2012, GT Exhaust, Inc. All Rights Reserved
Wye Connector GT Exhaust Accessories Installation and Operation Manual Rev. A (c) Copyright 2012, GT Exhaust, Inc. All Rights Reserved Published: April 30, 2012 NOTICE The instructions herein must be expressly
More informationTurbine & Generator Rotor Welding to Solve Reliability and Performance Issues. Tom Smith President T and A Consultants April 16-17, 2013
Turbine & Generator Rotor Welding to Solve Reliability and Performance Issues Tom Smith President T and A Consultants April 16-17, 2013 Rotor Welding History Rotor welding was developed in the U.S. in
More informationA Derailment Investigation Leads to Broken Spikes. Brad Kerchof Research & Tests
A Derailment Investigation Leads to Broken Spikes Brad Kerchof Research & Tests 1 Google Earth image of the derailment site Vandergrift, PA, January 2014 8.3 curve, river grade (0.3% descending to 0%)
More informationVW Surface-Mount Strain Gauge
VW Surface-Mount Strain Gauge 52650399 Copyright 2003 Slope Indicator Company. All Rights Reserved. This equipment should be installed, maintained, and operated by technically qualified personnel. Any
More informationAn Innovative High Strength Steel Engine Cradle Concept
An Innovative High Strength Steel Engine Cradle Concept Michael Gulas Projects Manager - FEA Market Development & Product Applications Dofasco Inc. 1 Program Objectives Demonstrate weight savings achievable
More informationHoward Midstream Energy Partners LLC Contractor Covered Task List Last updated 10/11/2013
001 Provide Security for Pipeline Facilities 195.436 Oral 003 Test Breakout Tank Overfill Protective Devices 195.428 Oral 004 Inspect and Calibrate Breakout Tank Overfill Protective Devices 195.428 005
More informationVANTAGE V Cleaning Pig
VNTGE V Cleaning Pig Sizes: 10-inch and larger ulletin No: 3000.004.06 Date: pril 2011 Cross Indexing No: n/a Supersedes: 3000.004.05 (2/09) Options DCDC-R VNTGE V Cleaning Pig with brushes (12-inch size
More informationLoad Cell for Manually Operated Presses Model 8451
w Technical Product Information Load Cell for Manually Operated Presses 1. Introduction... 2 2. Preparing for use... 2 2.1 Unpacking... 2 2.2 Using the instrument for the first time... 2 2.3 Grounding
More informationDate of Addendum Issue: Effective Addendum Date: Affected Publication: ADDENDUM 2
Date of Addendum Issue: August 2011 Effective Addendum Date: February 1, 2012 Affected Publication: API Specification 6D, Specification for Pipeline Valves, 23rd Edition, April 2009, Effective Date: October
More informationBY: Paul Behnke ITT Industries, Industrial Process. Juan Gamarra Mechanical Solutions, Inc.
DRIVE SHAFT FAILURE ANALYSIS ON A MULTISTAGE VERTICAL TURBINE PUMP IN RIVER WATER SUPPLY SERVICE IN A NICKEL AND COBALT MINE IN I MADAGASCAR -BASED ON ODS AND FEA Juan Gamarra Mechanical Solutions, Inc.
More informationinter.noise 2000 The 29th International Congress and Exhibition on Noise Control Engineering August 2000, Nice, FRANCE
Copyright SFA - InterNoise 2000 1 inter.noise 2000 The 29th International Congress and Exhibition on Noise Control Engineering 27-30 August 2000, Nice, FRANCE I-INCE Classification: 0.0 EFFECTS OF TRANSVERSE
More informationLeak Detection in Large Diameter Mains
Leak Detection in Large Diameter Mains Waterloss Europe 2017 Pedro Pina, Regional Director for Europe and Africa We Help Prevent Pipe Leaks & Breaks 2 Why do pipes fail? Operational Pressure Weakening
More informationDESIGN OF MACHINE MEMBERS - I
R10 Set No: 1 III B.Tech. I Semester Regular and Supplementary Examinations, December - 2013 DESIGN OF MACHINE MEMBERS - I (Mechanical Engineering) Time: 3 Hours Max Marks: 75 Answer any FIVE Questions
More informationAgilent G2738A Upstream Capillary Interface
Agilent G2738A Upstream Capillary Interface 4890, 5890, and 6890 Gas Chromatographs Installation Guide Agilent Technologies Notices Agilent Technologies, Inc. 2003 No part of this manual may be reproduced
More informationVW Arc-Weldable Strain Gauge
VW Arc-Weldable Strain Gauge 52640399 Copyright 2002 Slope Indicator Company. All Rights Reserved. This equipment should be installed, maintained, and operated by technically qualified personnel. Any errors
More informationDRUM BRAKE RIMS Periodic inspection of drum brake rims is necessary to determine indications of uneven or excessive wear. In general, brake rim failures other that regular wear are caused by brake linings
More informationMECHATRONICS LAB MANUAL
MECHATRONICS LAB MANUAL T.E.(Mechanical) Sem-VI Department of Mechanical Engineering SIESGST, Nerul, Navi Mumbai LIST OF EXPERIMENTS Expt. No. Title Page No. 1. Study of basic principles of sensing and
More informationRTM COMPOSITE LUGS FOR HIGH LOAD TRANSFER APPLICATIONS
25 TH INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES RTM COMPOSITE LUGS FOR HIGH LOAD TRANSFER APPLICATIONS Markus Wallin*, Olli Saarela*, Barnaby Law**, Tommi Liehu*** *Helsinki University of Technology,
More informationVisual Inspection of Reactor Vessel Head Penetration Nozzles
International Conference Nuclear Energy for New Europe 2003 Portorož, Slovenia, September 8-11, 2003 http://www.drustvo-js.si/port2003 Visual Inspection of Reactor Vessel Head Penetration Nozzles Simon
More informationOconee Nuclear Station ALLOY 600 REPAIRS 1EOC23
Oconee Nuclear Station ALLOY 600 REPAIRS 1EOC23 We re requiring more inspections due to susceptibility of material to cracking Some utilities have implemented mitigative actions Stress improvement Weld
More informationMERIDIAN, 2 or 3 PIECE, TRUNNION MOUNTED BALL VALVES
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS MERIDIAN, 2 or 3 PIECE, TRUNNION MOUNTED BALL VALVES Size Range 2 48 ASME Classes 150-2500 *It is recommended that the valve installer is familiar with
More informationPLASTI-GRIP* Terminals and Splices
PLASTI-GRIP* s and Splices Application Specification 114-2161 29 MAR 16 Rev G All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
More informationSimulating Rotary Draw Bending and Tube Hydroforming
Abstract: Simulating Rotary Draw Bending and Tube Hydroforming Dilip K Mahanty, Narendran M. Balan Engineering Services Group, Tata Consultancy Services Tube hydroforming is currently an active area of
More informationTutorial: Calculation of two shafts connected by a rolling bearing
Tutorial: Calculation of two shafts connected by a rolling bearing This tutorial shows the usage of MESYS shaft calculation with multiple shafts. The shaft calculation software provides different views
More informationPipeline Condition Assessment. Condition Assessment Investment Strategy. What s going on down there? 5/16/2018 TRENCHLESS ASIA 2018
wrc-infrastructure.co.uk TRENCHLESS ASIA 2018 Pipeline Condition Assessment Peter Henley WRc Infrastructure 7-8 May 2018 Organised by Event Partner Platinum Sponsors What s going on down there? Condition
More information