E15: What Retailers and Service Companies Need to Know. Bureau of Weights and Measures

Transcription

1 E15: What Retailers and Service Companies Need to Know Bureau of Weights and Measures

2 E15 Presentation Overview Presenter: Judy Cardin Director, Bureau of Weights and Measures

3 E15 Overview The Bureau of Weights and Measures has developed resource materials for retailers and service companies to understand the requirements related to E15. Our goal in presenting this material is to assist in providing retailers with the education and resources needed to avoid legal and customer satisfaction pitfalls resulting from the sale of E15 in Wisconsin.

4 E15 Overview We have developed a multitude of resources, fact sheets, forms, and compiled it a webpage dedicated to E15. All of the information in this presentation can be found on that page here: In addition to state requirements, we encourage you to familiarize yourself with EPA E15 requirements.

5 E15 Overview Please see your handouts for the following fact sheets and forms: E15 Retailer Fact Sheet Alternative Fuel Labeling: E15 Fact Sheet Blending E15 at the Pump: What Retailers Need to Know E15: Conversions of Storage Tank Systems and Dispensers Storage Tank Plan Approval & Installation Requirements for Alternative Fuels Alternative Fuel Storage Tank System and/or Dispenser Installation/Conversion Application Form Checklist for Underground Tank Installation ATCP 93 Notification Record

6 What Retailers Need to Know About Selling E15 Presenter: Alicia Clark Compliance Officer Photo courtesy of e15fuel.org

7 Selling E15 What is E15? The EPA defines E15 as a blend of gasoline that contains greater than 10% ethanol, and up to 15% ethanol Under current Wisconsin law, E15 must be sold as an alternative fuel

8 Selling E15 What vehicles may use E15? Model year 2001 and newer cars, light duty trucks, and medium-duty passenger vehicles (SUVs); and flexible-fuel vehicles (FFVs) are allowed by the EPA to use E15

9 Selling E15 What vehicles and engines may NOT use E15? All motorcycles All vehicles with heavy duty engines, such as school buses, transit buses, and delivery trucks All off-road vehicles, such as boats and snowmobiles All engines in off-road equipment, such as lawn mowers and chain saws All model year 2000 and older cars, light-duty trucks, and medium-duty passenger vehicles (SUVs)

10 Selling E15 What are the price posting requirements for E15? All grades of motor fuel must be advertised on conspicuous signs Conspicuous posting includes street signs, sandwich boards, or window signs Signs must clearly display all prices per gallon including taxes for all grades of fuel that are being offered to the general public Stores can display some prices on a street sign, and the rest of the prices on a supplemental conspicuous sign posting Signs can only include the price of motor fuel - inclusion of other commodities or services, such as car washes, is prohibited

11 Selling E15 What fuel quality specifications is E15 required to meet in Wisconsin? As an alternative fuel, E15 is not required to meet the same standards as automotive gasoline, however, the ethanol used to make E15 must meet the ASTM D4806 specification and the gasoline used must meet ASTM D4814 specification DATCP will test E15 to ensure the ethanol content is correct

12 Selling E15 What do I need to know about dispensing E15? Tank system and dispensing equipment must be compatible with the fuel being stored and dispensed Equipment used to store or dispense fuel consisting of more than 10 percent ethanol by volume may not contain or consist of any of the following materials: Metals. Zinc, lead, aluminum or alloys containing these metals, such as brass or terne Note: Terne-plated steel and lead based solder are commonly used in equipment that handles gasoline. These materials will dissolve when in contact with high concentrations of ethanol. Natural materials, cork, leather or natural rubber

13 Selling E15 Polymers. Polyurethane, polyvinyl chloride, polyamides, or methyl-methacrylate plastics. Note: Materials that have been shown to be generally compatible with high concentrations of ethanol include unplated steel, stainless steel, black iron, bronze, Neoprene rubber, Buna-N, polypropylene, nitrile, Viton, Teflon, thermoset reinforced fiberglass and thermoplastic piping material. Fueling dispensers installed after February 1st, 2009 must have a separate fueling nozzle and hose for dispensing any ethanol-blended motor fuels of more than 10 percent ethanol by volume

14 Selling E15 Dispensers installed prior to February 1st, 2009 that do not have a separate nozzle and hose for dispensing E15 must bear a label clearly warning any purchaser that the first gallon may have more than 10 percent ethanol by volume This label must be adjacent to the required E10 label, and must meet all labeling requirements specified in ATCP (1)(b)

15 Selling E15 The warning label must be adjacent to the required E10 label and must be: Present at all times the product is offered for sale Placed on the face of the dispenser next to the name and grade of the product being dispensed Placed so that the text is not sideways or upside down Contrasting in color to the dispenser Conspicuous and legible to a customer when viewed from the driver s seat of a motor vehicle that is located within 6 feet of the dispenser Capable of withstanding extremes of weather conditions for at least 1 year and resistance to gas, oil, grease, solvents, detergents, and water

16 Selling E15 What are the requirements for labeling E15 at the dispenser? Any device that dispenses a gasoline-ethanol fuel blend of more than 2% by volume of ethanol must be labeled with the maximum volume percentage of ethanol at all times the product is offered for sale This label must be placed on the face of the dispenser next to the name and grade of the product being dispensed This label must meet all of the requirements previously discussed E15 may be labeled using either the EPA s E15 label, or the Ethanol Flex Fuel labeling established by the FTC

17 Selling E15 EPA s E15 label:

18 Selling E15 The EPA label must measure 3 and 5 8 inches wide by 3 and 1 8 inches high The EPA label must be placed on the upper two-thirds of each fuel dispenser where the consumer will see the label when selecting a fuel to purchase For dispensers with one nozzle, the EPA label must be placed above the button or other control used for selecting E15, or in any other manner which clearly indicates which control is used to select E15 For dispensers with multiple nozzles, the EPA label must be placed in the location that is most likely to be seen by the consumer at the time of selection of E15

19 Selling E15 Ethanol Flex Fuel labeling requirements established by the FTC:

20 Selling E15 Ethanol Flex Fuel labeling requirements established by the FTC: The FTC label is 3 inches (7.62 cm) wide x 21 2 inches (6.35 cm) long. Helvetica Black or equivalent type is used throughout. The band at the top of the label contains one of the following: For all flex fuels, the numerical value representing the volume percentage of ethanol in the fuel followed by the percentage sign and then by the term ETHANOL ; or For ethanol flex fuels containing more than 10 percent and no greater than 50 percent ethanol by volume. The numerical value representing the volume percentage of ethanol in the fuel, followed by the percentage sign and then the term ETHANOL

21 Selling E15 At least one FTC label must be posted on each face of each alternative fuel dispenser If you are selling two or more kinds of alternative fuel with different automotive fuel ratings from a single dispenser, separate FTC labels for each fuel must be posted on each face of the dispenser The FTC label, or labels, must be placed conspicuously on the dispenser so as to be in full view of consumers and as near as reasonably practical to the price per unit of the automotive fuel

22 Selling E15 What about octane labeling? E15 is not an automotive gasoline under Wisconsin law so retailers are not required to post an octane rating If a retailer chooses to post an octane rating, the fuel MUST meet the posted octane DATCP will test the fuel to ensure the posted octane is correct

23 Selling E15 What do I need to know about blending to get E15? Two common approaches to selling E15 are: From a storage tank dedicated to E15 By blending E10 with E85 at the dispenser to get E15 Blending in the storage tank is not permitted E98 E100 cannot be stored in an underground storage tank, and can only be stored in approved aboveground storage tanks The installation of aboveground storage tanks requires plan approval from DATCP

24 Selling E15 Blending at the pump can be done using E85 or other high blend ethanol product E85, or flex fuel, is a term that refers to high-level ethanol-gasoline blends containing 51%-83% ethanol, depending on geography and season Because of the range in possible ethanol content of E85, retailers must ensure the blend ratio on all dispensers are set to properly blend for E15 at all times

25 Selling E15 There are two ways to ensure proper blend ratio: Program the dispensers for the maximum ethanol content of the E85/Flex Fuel Have a service company adjust the blend ratios every time the ethanol content in the E85/Flex Fuel changes This requires regular monitoring of the ethanol content of the E85/Flex Fuel you are receiving and prompt action when the ethanol content changes If a consumer experiences vehicle damage as a result of fuel being dispensed at a higher ethanol content than what is posted on the dispenser, the retailer is responsible

26 Selling E15 Are there any approvals I need to sell E15? YES!!

27 Approvals, Forms, and Inspections for E15 Presenter: Keith Garbe, Weights and Measures Petroleum System Supervisor

28 Storage Tank Plan Approval & Installation Requirements for Alternative Fuels Installation plans must to be submitted for approval on form TR-WM-126. The fee for plan approval varies depending on the size of the tank system. All tank systems must be installed by a DATCP certified tank installer working for a registered tank specialty firm, or under the direction of a professional engineer. A list of tank specialty firms can be found on our website here: pecialty_firm_registrations.pdf

29 Storage Tank Plan Approval & Installation Requirements for Alternative Fuels Part I of the Storage Tank Alternative Fuel Installation/Conversion Application (form TR-WM-132) needs to be submitted with the installation plan. This form requires the DATCP certified tank system installer or a professional engineer to verify that the tank system materials are compatible with the fuel being stored. This form can be found on our website here: mhazstoragetanksforms.aspx

30 Storage Tank Plan Approval & Installation Requirements for Alternative Fuels When the approved tank system is installed, final inspection and installation approval is performed by a state inspector (no additional fee) The approved installation checklist and tank registration paperwork must be submitted to DATCP Permit staff: form TR-WM-137 for underground tanks or form TR- WM-118 for aboveground tanks (no additional fee) If the installation was an underground tank system annual operating permits are issued (no additional fee)

31 E15: Conversions of Storage Tank Systems and Dispensers Storage and dispensing systems being converted from fuels containing 10% or less ethanol, to fuels containing greater than 10% ethanol, must meet the requirements of Wisconsin Administrative Code ATCP These requirements include plan review and notification, equipment requirements, material compatibility, tank cleaning, and tightness testing Plan review and an onsite inspection by the department are required for facilities converting to store and dispense ethanol-based fuels

32 E15: Conversions of Storage Tank Systems and Dispensers At least 15 business days prior to commencing the conversion, Part I of the Storage Tank Alternative Fuel Installation/Conversion Application (form TR-WM-132) must be submitted to the DATCP This form requires the DATCP certified tank system installer or professional engineer to verify that the tank system materials are compatible with the fuel being stored. Installation plans do not need to be submitted for a conversion, only Part I of the form.

33 E15: Conversions of Storage Tank Systems and Dispensers After DATCP approval of Part I, conversion can begin During the conversion process, Part II of form TR-WM- 132 must be completed by the owner/operator and retained on site for DATCP inspector review. At least 30 days prior to commencing normal fueling operations using ethanol-blended fuel, the owner/operator must notify the weights and measures petroleum inspector responsible for inspecting the facility. A map of weights and measures petroleum inspectors can be found at: ies.pdf

34 E15: Conversions of Storage Tank Systems and Dispensers A copy of Part II of form TR-WM-132 and a registration change form must be submitted to DATCP by the owner/operator. Use form TR-WM-137 for underground tanks, form TR-WM-118 for aboveground tanks

35 Equipment Requirements for Selling E15 Listed equipment: Equipment used for dispensing ethanol-blended motor fuel must be listed or recognized by the manufacturer as being compatible with ethanolblended fuel, except where otherwise approved in writing by the department Dispenser nozzles and hoses: Dispensers that are installed on or after February 1, 2009, must use a separate fueling nozzle and hose for dispensing ethanolblended motor fuels of more than 10% ethanol by volume

36 Equipment Requirements for Selling E15 In-line filters: A 1- or 2-micron in-line filter must be used for dispensing ethanol-based fuel Lined tanks: Tanks with linings regulated under Wis. Admin. Code s. ATCP may not be used to store ethanol-blended fuels Most metal storage tanks and pipe are compatible with ethanol. However, some fiberglass storage tank systems manufactured before 1992 might not be compatible with higher levels of ethanol. The tank manufacturer and installation contractor should be consulted for additional information on the reuse of underground storage tanks.

37 Cleaning the Tank Storage and dispensing systems containing fuel with an octane rating less than the converted fuel must be emptied of all product before conversion If another type of fuel was stored in the tank, the tank must be cleaned in accordance with API 2015 or another method approved by the department, before introducing the ethanol-blended fuel All cleaning work must be performed by a certified tank cleaner unless specifically approved by the department based on an alternate cleaning method

38 Tightness Testing A precision tightness test must be performed on the tank and piping in accordance with Wis. Admin. Code s. ATCP (4) before placing the tank system back into service

39 Form TR-WM-132:

40 Form TR-WM-132:

41 Form TR-WM-132:

42 Form TR-WM-132:

43 Form TR-WM-132:

44 Form TR-WM-132:

45 Form TR-WM-132:

46 Form TR-WM-132:

47 ATCP 93 Notification Record:

48 ATCP 93 Notification Record:

49 Checklist for Underground Tank Installation:

50 Checklist for Underground Tank Installation:

51 Checklist for Underground Tank Installation:

52 Checklist for Underground Tank Installation:

53 Checklist for Underground Tank Installation:

54 Checklist for Underground Tank Installation:

55 Questions?