MATERIALS HANDLING 2017 EDITION

Transcription

1 MTRILS NLING 2017 ITION

2 IN & LVR LOKS Grade 80 Lifting hain & ittings 3S Industrial Manual Lever locks ontents Model: 3S apacities: 250kg to 6 tonne The 3S Industrial Manual Lever locks have many features including the following: 3 // hain & Lever locks 4 // eaver 3S Industrial Manual Lever locks 5 // eaver 3S Industrial Manual Lever locks - With Overload Protection 6-7 // eaver 3S Industrial hain locks 8 // eaver 3S Industrial Manual hain locks - With Overload Protection 9 // eaver 3S Industrial hain locks & With Overload Protection // Liftall 3G-V Industrial Lever & hain locks // Pacific Vital hain & Lever locks 17 // PW nchor M3 hain locks 18 // Trolleys & lamps // Push & Geared Girder Trolleys // Pipe Trolleys & Girder lamps 28 // oists // lectric hain oists & Trolleys // Permanent Magnet Lifters // Pneumatic (ir) oists 48 // Winches // lectric Winches 52 // ir Winches // and Winches 56 // igital Load ells 57 // Materials andling quipment // orizontal & Vertical Plate lamps 60 // and Operated Sheave locks 61 // eavy uty Snatch locks 62 // Gunnebo Snatch locks 63 // Wire Rope oists 63 // oncrete lutches // Lifting Tong & lamps 66 // Pipe Lifters // and Pallet Trucks & Trolleys 71 // Manufactured & ngineered s // orklift ttachments // Goods ages 77 // Pallet ooks // Work ages // Storage ages & Gas ylinder Storage // Spreader eams, ars & Systems eavy duty, available in 250kg to 6 tonne capacity Lever blocks are a versatile lifting & tensioning device widely used in rigging, construction & mining Lever blocks can be used in any direction, but must be in a straight line The eaver lever block has a chain guide fitted in order to stop the load from jumping out of the pockets on the load sprocket The eaver 3S industrial chain lever block mechanism and gears are enclosed in a robust all steel compact shell The load chain is made of high resistance, Grade 80 alloy steel, black finish, heat treated, calibrated and marked according to International Standards ISO 3077 and ISO 1834 ll eaver lever block gears are fitted with industrial roller bearings The short arm lever and the gear ratio allows minimum effort to raise maximum load with maximum security The top and bottom hooks come complete with cast latches Top and bottom hooks are fitted with ball bearings to allow rotation under load rgonomic and heavy free knob to ensure easy and convenient handling Machined and heat treated gears, offering better durability and longer life cycle very eaver 3S industrial lever block is operationally tested to its rated capacity and is supplied with a eaver test certificate, relating to its stamped identification side plate eaver I plates and rivets are supplied in stainless steel (a non conductive material) in order to avoid dangerous sparking, making them ideal for underground mining comprehensive range of spare parts are available, complete with full repair facilities and re-testing to ustralian Standard specifications. Only applicable to Lever locks 800kg - 9T Only applicable to hain locks 500kg - 10T 2 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 3

3 3S Industrial Manual Lever locks omplies to S olour oded to Match International Lifting Standards. ode Rated apacity olour ode Grey Grey White Violet Yellow rown Standard Lift Metre Test Load KN eadroom ffort on lever to lift full load N No. of load chain falls iameter of load chain mm 4 4 6x18 8x24 10x30 10x30 Length of Lever andle imensions mm Net kg S Industrial Manual Lever locks - WIT OVRLO PROTTION omplies to S olour oded to Match International Lifting Standards. ode Rated apacity olour ode White Violet Yellow rown Orange Standard Lift Metre Test Load KN eadroom ffort on lever to lift full load N No. of load chain falls iameter of load chain mm 6x18 8x24 10x30 10x30 10x30 Length of Lever andle imensions mm Net kg kg & 500kg 1.6 Tonne & 3.2 Tonne 6.3 Tonne 1.6 Tonne & 3.2 Tonne 6.3 Tonne 9 Tonne 4 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 5

4 3S Industrial hain locks Model: 3S apacities: 250kg to 10 tonne hain blocks are designed for use on monorails, jibs fixed installations and for maintenance use. They are to be used for vertical lifts only. If they are side loaded or used horizontally, jamming of the loader chain and damage to the blocks may occur. eaver 3S industrial chain blocks are colour coded to match international lifting standards for fast and accurate identification of WLL The eaver 3S industrial chain block has improved reinforced side covers, made from heavy duty steel to ensure full protection of the vital gears, shafts and bearings Machined and heat treated gears, offering better durability and longer life cycle Superior Weston type friction braking system that works with load pressure and incorporates high strength twin synchronised pawls for additional safety ensuring that it cannot be free wheeled, extending the product life eaver 'I plates and rivets are supplied in stainless steel and non conductive material in order to avoid dangerous sparking, making them ideal for underground mining comprehensive range of spare parts is available, complete with full repair facilities and re-testing to ustralian Standard specifications. 3S Industrial Manual hain locks omplies to S olour oded to Match International Lifting Standards. ode Rated apacity olour ode Grey White Violet Green Yellow Red Standard Lift Metre No. of load chain falls ffort to lift full load kg eadroom iameter of load chain mm 4x12 5x15 6x18 8x24 8x24 9x imensions mm Net kg The load chain is made of high resistance, Grade 80 alloy steel, black finish, heat treated, calibrated and marked according to International Standards ISO 3077 and ISO 1834 ll eaver chain block gears are fitted with industrial roller bearings Strong and engineering designed gear on ratchet gear part to ensure maximum performance and security The top and bottom hooks fitted with ball bearings to allow rotation under load very eaver 3S industrial chain block is operationally tested to its rated capacity and is supplied with a eaver test certificate, relating to its stamped identification side plate 250kg 500kg, 1 & 2 Tonne 3 & 5 Tonne 10 Tonne Only applicable to Lever locks 800kg - 9T Only applicable to hain locks 500kg - 10T 6 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 7

5 3S Industrial Manual hain locks - WIT OVRLO PROTTION omplies to S S Industrial Manual hain locks omplies to S olour oded to Match International Lifting Standards. olour oded to Match International Lifting Standards. ode Rated apacity olour ode White Violet Green Yellow Red Orange Standard Lift Metre No. of load chain falls ffort to lift full load kg eadroom iameter of load chain mm 5x15 6x18 8x24 8x24 9x30 9x imensions mm Net kg ode Rated apacity olour ode White Violet Green Yellow Red Standard Lift Metre No. of load chain falls ffort to lift full load kg eadroom iameter of load chain mm 5x15 6x18 8x24 8x24 9x imensions mm Net kg S Industrial Manual hain locks - WIT OVRLO PROTTION 500kg, 1 & 2 Tonne 3 & 5 Tonne 10 Tonne omplies to S olour oded to Match International Lifting Standards. ode Rated apacity olour ode White Violet Green Yellow Red Orange Standard Lift Metre No. of load chain falls ffort to lift full load kg eadroom iameter of load chain mm 5x15 6x18 8x24 8x24 9x30 9x imensions mm Net kg MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 9

6 LITLL 3G-V Industrial Lever locks 3G-V Industrial Lever lock with Safety Overload lutch (Limiter) with Safety Overload lutch (Limiter) Model: 3G-V apacities: 750KG to 9 tonne omplies to S Our range of Liftall 3G-V Industrial Lever locks include built-in safety overload clutch (limiter) technology, meaning greater work safety when lifting or pulling. This range of Lever locks has been carefully developed to comply with ustralian Standards. eavy duty, available up to 9 tonne capacity, the 3G-V Industrial Lever lock is designed for a variety of applications in mining, heavy industry, major construction works and off shore exploration The 3G-V Industrial Lever lock has all the features of the 3G lever blocks, with additional advantages The load chain is Grade 80 lloy Steel, black finish, heat treated, calibrated and marked according to ustralian standard S ll 3G-V Industrial Lever lock gears are fitted with industrial roller bearings Incorporating a safety overload clutch (limiter) mechanism, an added safety precaution, as the handle cuts out at around 30% more than the rated WLL to prevent severe overloading of the lever block The Overload lutch therefore reduces downtime, repair costs and extends the service life of the lever block ach 3G-V Industrial Lever lock is operationally tested to its rated capacity and is supplied with a test certificate relating to its stamped identification side plate Precision engineered lower hooks with thrust roller bearings for trouble-free operation. ode VM VM VM VM VM Rated apacity olour Orange Orange Orange Orange Orange Test Load (t) Standard lift (m) Min. distance between two hooks fforts required at capacity (N) No. of load chains iameter of load chain imensions imensions imensions imensions imensions tonne KG 0.75t 3G-V W LL W LL 3G-V 0.75t LL 9 t 3G-V W W 3G-V LL t 9 1.5t 3G-V 1.5, 3 tonne W LL W LL 3G-V 1.5t 6 t 3G-V W LL 6 tonne 3G-V W LL t 6 LL 9 t 3G-V W W 3G-V LL t 9 9 tonne W LL 1.5t 3G-V Precision engineered lower hooks with thrust roller bearings for trouble-free operation. 3G-V 1.5, 3 tonne 1.5t W LL With Safety Overload lutch With Safety Overload lutch 10 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 11

7 LITLL 3G-V Industrial hain locks with Safety Overload lutch Model: 3G-V apacities: 500kg to 20 tonne The 3G-V Industrial hain locks feature safety load limiting clutch protection which results in greater work safety when lifting. This range of chain blocks has been carefully developed to comply with ustralian Standards. They are to be used for vertical lifts only. If they are side loaded or used horizontally, jamming of the load chain and damage to the blocks may occur. The 3G-V Industrial hain lock has all the features of the 3G lever blocks, with added benefits The load chain is Grade 80 lloy Steel, black finish, heat treated, calibrated and marked according to ustralian standard of S ll 3G-V Industrial hain lock gears are fitted with industrial roller bearings Incorporating a safety overload clutch (limiter) mechanism, an added safety precaution, as the handle cuts out at around 30% more than the rated WLL to prevent severe overloading of the chain block very 3G-V Industrial hain lock is operationally tested to its rated capacity and supplied with a test certificate, relating to its stamped identification side plate I plates and rivets are supplied in stainless steel in order to avoid dangerous sparking, making them ideal for underground mining comprehensive range of spare parts are available, and Robertsons can provide full repair facilities and retesting to NT specifications. ode VM VM VM VM VM VM VM Rated apacity (t) Standard Lift (m) alls of hain ffort to lift Rated apacity (N) Test Load (kn) Net Load hain iameter per extra metre lift learance imensions Note: In addition to standard 3 and 6 metre lifts other chain lengths are available on request. 500Kg, 1 tonne & 2 tonne 10 tonne The Overload lutch therefore reduces downtime, repair costs and extends the service life of the chain block 20 tonne 3 tonne & 5 tonne all RISN ST RISN NT GOL OST TOOWOOM MKY GLSTON SYNY NWSTL MUSWLLROOK MLOURN NNONG PRT KLGOORLI With Safety Overload lutch With Safety Overload lutch 12 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 13

8 Vital hain locks Model: Vital Series apacities: 500kg to 20 tonne Vital Lever locks Model: Vital Series NR-2 apacities: 250kg to 9 tonne Vital chain blocks are suited for many applications in the mining, construction, industrial and automotive industry. The capacities vary from 0.5 tonne to 20 tonne and all chain blocks can be supplied with overload protection for added security of use. imensions in mm Manufactured in Japan using optimum high quality steel which conforms to the strict JIS & ISO regulations ll Vital models are manufactured to comply with S esigned for long-term use while providing the lowest possible per-use cost an be supplied close coupled and extra close coupled to girder trolleys to alleviate headroom restrictions Note: ll Vital chain blocks can be supplied with 'overload protection' ustomised lift heights are available upon request Quality caged needle bearings on load sheave and thrust bearings on bottom hook ardened alloy steel load chain with embossed identification, marked as per relevant standards Load hain exceeds ustralian Standards with a 5:1 Safety actor. ode V050 V100 V150 V200 V300 V500 V750 V910 V915 V920 Model 05V5 10V5 15V5 20V5 30V5 50V5 75V5 90V5 92V5 93V5 Rated apacity (t) Standard Lift eight (m) Pull to lift load x2 41x2 Net Note: Vital chain blocks with customised lift heights are available The NR-series lever blocks feature the free-wheeling braking system which enables fast and easy operation. There is a minimum load requirement of 10% of the Working Load Limit to ensure that the braking system remains operative and continues to support the load. These lever blocks are ideally suited for the shipbuilding, construction, mining and power transmission industries. Manufactured in Japan using optimum high quality steel which conforms to the strict JIS & ISO regulations ll Vital models are manufactured to comply with S One-touch operation for free chain adjustment Vital lever blocks can be supplied with overload protection for added security of use (excluding 250kg and 500kg models) The unique design of the bottom hook prevents slipping and ensures safe operation ardened alloy steel load chain with embossed identification, marked to the relevant standards Load hain xceeds ustralian Standards with 5:1 Safety actor Minimum load requirement of up to 10% of the Working Load Limit to ensure the operation of the braking system..g. a 1.5 tonne lever block requires a minimum load of 150kg Light loading; not suitable for tandem operations. If one of the lever blocks used in the tandem experiences an increase in the shared load and the other is reduced below the minimum load, inoperative breaks may occur and this could cause for the load to fall. ode VL202 VL205 VL207 VL210 VL215 VL230 VL260 VL290 Model NR2-03 NR2-05 NR2-08 NR2-10 NR2-15 NR2-30 NR2-60 NR2-90 Rated apacity (t) Standard Lift eight (m) Pull to lift load Net hain Size No. of alls Note: Vital lever blocks with customised lift heights are available. 14 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 15

9 Model: Vital VR-2 Series apacities: 800kg to 6.3 tonne PW nchor M3 hain locks The VR-series lever blocks feature a lock-in and lock-out braking system which is the more traditional style with a free-wheeling system requiring the disengagement of the gear drive mechanism which is impossible with any load suspended on it. These lever blocks are ideally suited for the (underground) mining, aerospace and energy industries. Manufactured in Japan using optimum high quality steel which conforms to the strict JIS & ISO regulations Manufactured to comply with S Vital lever blocks can be supplied with overload protection for added security of use (excluding 250kg and 500kg models) ode VL107 VL115 VL130 VL160 Model VR2-08 VR2-15 VR2-30 VR2-60 Rated apacity (t) Standard Lift eight (m) Pull to lift load Net hain Size No. of alls The unique design of the bottom hook prevents slipping and ensures safe operation asy two-step operation to prevent accidental freewheeling ardened alloy steel load chain with embossed identification, marked as to the relevant standards Load hain xceeds ustralian Standards with 5:1 Safety actor Suitable for tandem lifting applications. Model: M3 apacities: 500kg to 10 tonne The PW nchor M3 Series hain locks have been designed for maximum durability and safety for continuous heavy-duty industrial applications. vailable in standard lift heights of 3 and 6 metres, these superior units can be close coupled to PW nchor Push and Geared Trolleys for further reduced headroom. Optional lift heights also available. ode (3m lift) ode (6m lift) apacity eadroom lose eadroom hain ia. hain alls kg tonne tonne tonne tonne tonne tonne tonne Note: lso available with Overload Protection. PW nchor L5 Series Lever oists Model: L5 Series apacities: 800kg to 9 tonne Net The PW nchor L5 Series Lever oist from KITO Japan are lightweight, compact and designed for heavy-duty work in the most rigorous and demanding applications. ll models feature the patented free-wheel safety brake mechanism and nickel plated load chain. Supplied in standard lift heights of 1.5 metres and selected 3 metre models, with optional lift heights also available. Note: Vital lever blocks with customised lift heights are available. Model VR2-08 VR2-15 VR2-30 VR ode (1.5m lift) apacity (t) ode (3m lift) eadroom Lever Length Load hain ia x all x x x x x x x Note: lso available with Overload Protection. Note: Vital lever blocks with customised lift heights are available. 16 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 17

10 TROLLYS & LMPS Push and Geared Girder Trolleys Push Girder Trolleys omplies to S Orange in colour ode S S S S S S S S apacity WLL (t) eam Width Note: ontact your local Robertsons branch for full dimensions. Our Push and Geared Girder Trolleys are colour coded for safer lifting capacity recognition olour coded to International Lifting Standards esigned to run on either R.S.J. or Universal eams Independent hanging eye for easy attachment of chain blocks Precision ball bearing trolley wheels complete with dust cover and circlip Lightweight robust all-steel construction ach Girder Trolley has an individual serial number stamped on the stainless steel identification plate. This number coincides directly to the test certificate of the product, for quick and easy tracing and reference Push and Geared Girder Trolleys are not designed for passenger elevator applications and must not be used for this purpose. Selection and calculation of the proper beam construction is the responsibility of the user. ully adjustable to suit varying flange widths up to a maximum of 350mm with the simple addition or subtraction of spacers or nuts on a suspension pin asy and simple mounting in different locations nti-derailment end plates fitted as standard for added safety nti-tilt blocks fitted as standard for additional safety and chain on geared trolleys has a special, corrosion resistant Zinc dichromate (gold) finish very Girder Trolley is operationally tested to 150% of its rated capacity and comes with a test certificate Spare trolley wheels are available, complete with full repair facilities and re-testing to NT specifications. 18 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 19

11 Geared Girder Trolleys lose eadroom Push Girder Trolleys omplies to S (to suit 3G chain blocks) omplies to S olour oded to Match International Lifting Standards. ode S S S S S S S Rated apacity (t) olour ode Violet Green Yellow Red Orange Orange Orange Proof Load (kn) djustable eam Width Standard Lift (m) ffort at Rated apacity (N) Minimum Radius of urve (m) (overall width) (length) G (headroom) I (flange dia.) J L L L Net Push and Geared Girder Trolleys are not designed for passenger elevator applications and must not be used for this purpose. Selection and calculation of the proper beam construction is the responsibility of the user. ode S S S S S Rated apacity (t) olour ode White Violet Green Yellow Red Proof Load (kn) djustable eam Width Minimum Radius of urve (m) (overall width) (length) S M Net Push and Geared lose oupled Girder Trolleys are not designed for passenger elevator applications and must not be used for this purpose. Selection and calculation of the proper beam construction is the responsibility of the user. min S min M 1-5 tonne tonne 1-30 tonne 20 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 21

12 d1 M P W lose eadroom Geared Girder Trolleys Pipe Trolley (to suit 3G chain blocks) omplies to S ode S S S S Rated apacity (t) olour ode Violet Green Yellow Red Proof Load (kn) Running eight (m) hain Pull (full load) djustable eam Width Minimum Radius of urve (m) (overall width) (length) S M Net ode apacity WLL Pipe ia. G PT ach G UOM Push and Geared lose oupled Girder Trolleys are not designed for passenger elevator applications and must not be used for this purpose. Selection and calculation of the proper beam construction is the responsibility of the user. Single lange Steel Plain Trolley Wheels ode apacity WLL L i S d1 P G W UOM S min M S ach S ach S ach S ach S ach S ach min i L earing S G - 22 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 23

13 Girder lamps range of colour coded Girder lamps, that offers instant recognition of the clamp capacity to the user. esigned to provide a quick and versatile point for all your lifting, rigging and hoisting needs. Girder lamps are colour coded for safer lifting capacity recognition The threaded adjustment mechanism easily attaches to the beam or girder flange to provide a safe and secure grip dditional security is provided by threaded adjustment screws secured by using the countersunk allen head screw to lock the threaded adjustment bar in position with a copper flat asy and simple mounting for permanent or temporary use in different locations Special clamp jaw design applies load away from the edge of the flange, reducing flange stress uilt-in load bar provides reduced headroom Robust, all steel construction very Girder lamp has an individual serial number stamped on the body of the clamp and also on the stainless steel identification plate. This number coincides directly to the test certificate of the product for quick and easy tracing and reference ll Girder lamps are operationally tested to 150% of the Working Load Limit (W.L.L.) and come with individual test certificates omplies to S4991. Girder lamps Model Type: Y Industrial omplies to S & S4991. olour oded to Match International Lifting Standards. ode Y Y Y Y Y Y Working Load Limit olour ode Violet Green Green Yellow Red Orange djustable eam Width Net max min max min max G min K min max djustable to fit a wide range of flange widths and beams 24 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 25

14 ntertainment Girder lamps Integral Push Trolley and Girder lamp Model Type: Y. omplies to S & S4991. lack Powder oated. ode Y Y WLL olour lack lack eam Width Net Max Min Max Min Max G Min K Min K Max The Integral Push Trolley and Girder lamp is designed to provide a quick and easy attachment to overhead beams for transporting loads for permanent or temporary mounting in different locations. The integral clamp is adjustable to the beam width in the same manner as the Girder lamp (model Y), by rotating the threaded spindle. omplies to S or additional safety the threaded adjustment mechanism is secured by tightening the locking lever against the sideplate Threaded spindle mechanism, zinc plated for superior corrosion protection YT omplies to S Yellow Powder oated Model Type. ode YT YT YT WLL eam width I L L M M16 M18 M24 O P T t Net asily adjustable to suit a wide range of flange widths and beams from 75mm to 200mm Robust steel construction with durable enamel paint finish in yellow for YT and black for YT models uilt-in load bar for reduced headroom very Integral Push Trolley and Girder lamp has an individual serial number stamped on the body of the clamp and also onto the aluminium identification plate which is securely mounted to the trolley side plate. This number coincides directly to the test certificate of the product for quick and easy tracing and reference ll Integral Push Trolley and Girder lamps are operationally tested to 150% of the rated capacity and come with individual test certificates. 26 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 27

15 OISTS LITLL lectric hain oists and Trolleys apacities: 500kg to 3 tonne ost efficient and robust, the LITLL lectric hain oists and Trolleys are the first choice when you need to lift heavy loads to a budget. The all steel construction ensures durability and strength, and having Plated uropean Load hain you know the most important component won t let you down. eaver have invested time and money on research and development to guarantee the eaver LITLL lectric hain oists and Trolleys will give you the trouble free service you demand. LITLL lectric oists Model Type: L volt 50z (Single Phase Models) omplies to S ode Rated apacity Lift eight (m) Lifting Speed m/min 50z oist Motor Single Phase Output (kw) 50z Ins lass % Load hain ia. No. of falls Test Load (t) Min. eadroom G Max. L1053S L1056S L1103S L1106S L1203S L1206S L1303ST L1306ST Min. pprox. Models available in single phase 240volts X 50z and 3 phase 415 volts X 50 z apacities from 500 kg to 3000 kg in both single and 3 phase Overload clutch to prevent damage from overloading Powder coated finish Grade T(80) zinc plated, calibrated uropean Load hain for increased resistance against corrosion and wear Standard lifts of 3 and 6 metres. ustom lifts are available on request hain inspection gauge supplied with every hoist (in order to self evaluate wear and tear on load chain) 5 pocket precision machined load sprocket for smooth action Reduction gear box is totally sealed, grease filled design ensuring that all components remain lubricated Zinc plated travel limiting springs uropean lectric ontrols (contactors and switch gear) IP54 protection on electric hoist for dust and water proof protection Thermal protection on hoist motor eavy duty asbestos free rake (for fast actuation) Upper and lower limit switches fitted as standard to prevent over-travel ontactor isolation mergency Stop 24 Volt control via IP65 uropean Pendant for increased safety Pendant control suspended by external wire rope (Strainer Wire) Sealed swivel bearing in bottom hook for 360 operation eavy duty cast safety latches fitted to top and bottom hook on all models igh duty cycle (up to 40% on 3 phase models) hain containers on all hoists omprehensive instruction manual, including wiring diagrams and parts breakdown, supplied with every hoist Test certificate supplied with every hoist confirming that it is tested to S Radio controls and special options available on request. LIT G imensions in mm ode 500kg & 1,000kg - Single all Rated apacity Major imensions pprox. G LIT L1053S L1056S L1103S L1106S L1203S L1206S L1303ST L1306ST Longer lift heights are available on request. Pendant length is 1 metre less than lift height (as Standard). ll hoists supplied with top suspension hook. IP 54 rating on all hoists. 2,000kg - ouble all G LIT 3,000kg -Triple all 28 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 29

16 LITLL lectric oists Model Type: L. 415volt 50z (Three Phase Models) omplies to S ode Rated apacity Lift eight (m) Lifting Speed m/min 50z oist Motor Single Phase Output (kw) 50z Ins lass % Load hain ia. No. of falls Test Load (t) Min. eadroom G Max. L2053S L2056S L2103S L2106S L2203S L2206S L2303ST L2306ST imensions in mm Min. pprox. LITLL lectric Trolleys Model Type: T. 415 volt 50z (Three Phase Model) 200 Ø ode Rated apacity eam Width Running Speed m/min INS lass % Net T T T Ø ode Rated apacity Major imensions pprox. L2053S L2056S L2103S L2106S L2203S L2206S L2303ST L2306ST Longer lift heights are available on request. Pendant length is 1 metre less than lift height (as Standard). ll hoists supplied with top suspension hook. IP 54 rating on all hoists. G G G LIT LIT LIT 500kg & 1,000kg - Single all 2,000kg - ouble all 3,000kg -Triple all 30 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 31

17 PII lectric hain oists ITI lectric hain oists The Pacific lectric hain oists offer a great balance between quality and price. The models vary from 250kg to 2 tonne capacity and are all tested to ustralian Standards. ll hoists are inclusive of many features which makes them suited for most applications. Optional motorised trolleys are available to complete the package. IP65 pendant with 24 volt control for operator safety Overload protection clutch prevents damage caused by overloading Inclusive of rake which automatically engages in the event of a power failure ompletely enclosed design to withstand harsh conditions Upper and lower electrical limit switches Pacific lectric hain oists 415Volt, 50 z Grade 80 zinc plated load chain supplied as standard Motor thermal protection on all Pacific lectric hain oists use protection provided for both primary and secondary control circuits IP54 protection rating on all electric hoists and trolleys Reverse phase protection relay on all models excluding 250kg Optional radio remote control. ode/model P025 P050 P100 P200 Rated apacity Standard Lift eight (m) hain imension 4x12 6.3x x x20.2 Speed (m/min) 12/3 10/2.5 8/2 4/1 Motor (kw) 0.6/ / / / Rating (%) 40/20 40/20 40/20 40/20 Load hain all No apacities: 250kg to 15 tonne itachi lectric hain oists are suited to most applications. The itachi models vary from 250kg to 15 tonne capacity and are available in three or single phase, two speed or single speed, to the ustralian Standards S Operation: fully contactorised with high rated contactors and pendant controls; both fitted with mechanical interlocks and 24 Volt control. Optional IP65 pendant Safety Limits: full current and shunt limit switches operate in both directions of hook travel Overload Limiter ll models are fitted with an electro-magnetic, self-adjusting disc type brake to the gearbox and the models have an additional auxiliary centrifugal brake fitted to the motor igh quality Grade 80 zinc plated load chain supplied as standard IP54 protection rating on all electric hoists and trolleys Motor thermal protection Optional radio remote control mbient temperature requirement of -10 to 40 degrees lass M4 inclusive of 180 starts p/hr ompletely enclosed design Reverse phase protection relay on all models excluding; 250kg, 500kg and all single phase models Trolleys fitted with Guide Rollers. Three Phase / Single Speed oists 415Volt, 50z ode/model ¼S ½S 1S 2S Rated apacity Speed (m/min) Motor (kw) eadroom Motorised Trolleys 415 Volt, 50z ode/model PT050 PT100 PT200 PT055 PT105 PT205 Rated apacity Speed (m/min) /5 20/5 20/5 Motor (kw) / / / MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 33

18 Three Phase / Two Speed oists 415Volt, 50z PII Porta oists apacities: 80kg to 500kg ode/model ¼SN ½SN 1SN 2SN 2N 3N 5N Rated apacity Speed (m/min) 7.2/ / / / / / /0.7 Motor (kw) 0.32/ / / / / / / eadroom The Pacific Porta oists are compact, lightweight 240 volt single phase electric chain hoists. They are available in a durable travel case which makes them the ideal portable solution for lifting, lowering and handling loads up to 500kg. ll models are tested to the ustralian Standards S vailable in 80kg, 125kg, 250kg and 500kg capacities Overload protection clutch prevents damage caused by overloading Single Phase / Single Speed oists 240Volt, 50 z ode/model ¼S1 ½S1 1S1 2S1 Rated apacity Speed (m/min) Motor (kw) eadroom uty cycle rated at 30% with 180 starts per hour 18 volt low voltage control for safe operation IP65 pendant control, dual speeds with variable speed slow control for raise and lower ll models are supplied as standard with 6 metre height of lift, a 5 metre pendant control, chain bucket and 3 metre power supply cable Upper and lower electrical limit switches Supplied with durable travel case. Three Phase / lectric Trolleys 415Volt, 50z ode/model 1T 2T 3T 5T Rated apacity T Speed (m/min) Single Speed T 10.5 or 21.0 TN Speed (m/min) Two Speed TN 21.0 / 5.3 Motor (kw) Min. Radius (m) Girder Width * Note: Larger girder widths are available upon request. ode/model PP080 PP125 PP240 PP500 Rated apacity Standard Lift eight (m) Pendant Length (m) Power Supply 50z (volt) hain imension 4.0x12 4.0x12 4.0x12 4.0x12 Motor Power (kw) Speed (m/min) (variable)/ (variable)/ (variable)/ (variable)/6.3 IP Rating Rating (%) Load hain all No *dditional height of lift is available upon request. Please note that this may vary the size and weight of the hoist and therefore may not fit into the travel case. imensions in mm ode/model PP080 PP125 PP240 PP m lift 3m lift 3m lift 3m lift G I J K L MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 35

19 PW NOR lectric hain oists apacities: 250kg to 20 tonne The PW nchor power hoist products have been designed and manufactured for use in a wide variety of industrial applications. PW nchor electric and pneumatic hoists range in capacity from 250kg to 20 tonnes and along with their ancillary products, guarantee smooth operation in the manufacturing process. R2 lectric hain oist The PW nchor R2 lectric hain oist is environmentally friendly with its new compact, lightweight and energy efficient design. oupled with the new MR2 Motorised Trolley, the r2/mr2 combination allows for easier and accurate load positioning in the workplace. asy to use Offers thermal protection to prevent overheating Upper and lower limit switches (ounter/our) meter and variable speed inverter as standard equipment. R2 Series lectric hain oist: Single Speed ode 3 (m) ode 6 (m) apacity (t) Model Lifting Speed (m/min) Load hain ia x fall R2-003S x R2-005L x R2-005S x R2-010L x R2-010S x R2-015S x R2-020L x R2-020S x R2-025S x R2-030S x R2-050S x eadroom 5 metre power supply cable (plug not included) ustralian Standard S1418.2, SM ST (US) 4 uty lass ISO eavy uty lassification M4 & M5, M (urope) 1m & 2m rating. R2 Series lectric hain oist: ual Speed with Inverter ode 3 (m) apacity (t) Model Lifting Speed (m/min) Load hain ia x fall R2-003IS x R2-005IL x R2-005IS x R2-010IL x R2-010IS x R2-015IS x R2-020IL x R2-020IS x R2-025IS x R2-030IS x R2-050IS x eadroom 5 metre power supply cable (plug not included) ustralian Standard S1418.2, SM ST (US) 4 uty lass ISO eavy uty lassification M4 & M5, M (urope) 1m & 2m rating. MR2 lectric hain oist and Motorised Trolley The PW MR2 lectric hain oist and Motorised Trolleys complement the R lectric hain oist and have been designed for use across a wide variety of industrial applications. oupled as an R2/MR2 combination for easier and accurate load position in the work place pplicable in both single and dual speed models ighly versatile and easy to use. apacity Model eadroom* eam Range eam Range Travel (m/min) Min Radius (t) Standard Optional Single Speed ual Speed 0.25 R2M R2M R2M R2M (standard) /4 2.0 R2M or 10 (optional) R2M R2M R2M *pplicable to both single and dual speed models 10 meter power supply cable (plug not included) with cable trolleys. 36 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 37

20 Permanent Magnet Lifter Permanent Magnet Lifters The Permanent Magnetic Lifter is a new concept product for lifting and handling steel plate, pipes, beams and cylindrical work pieces of ferromagnetic materials. Our Magnetic Lifters contain a Nde permanent magnet, which can generate high holding-power in a magnetic circuit. With the use of a magnetic lifter the need for slings, clamps and special lifting frames can be eliminated. They are compact in design and construction, convenient in operation with a strong holding force, and are safe and reliable. These magnetic lifters are widely used for lifting and hoisting in factories, warehouses, wharves and transport facilities. omplies to S4991 ode Model Number Rated apacity lat Plate WLL Rated apacity ylinder WLL ML < ML < ML < ML <16 K L M N O Max andle Turning orce ue to the high magnetic properties of the magnetic lifter the relevant size of the unit is smaller compared to other products with the same lifting capacity s the magnetic lifter is not electrically operated, accidents due to sudden power failure are avoided, the magnetic lifter can also be used outdoors or on site without the need for a power supply There are V slots incorporated into the holding face allowing it to be used to lift pipes or round bar work pieces The special safety locking mechanism on the handle prevents the magnetic lifter from accidentally being released The magnetic lifter comes complete with a rated shackle that is stamped with the Working Load Limit (W.L.L.); Test No.; Serial No.; Month and Year of manufacture and the uropean standard compliance mark () Magnetic lifters are individually Proof Tested to twice their rated capacity for flat steel plate ML <16 Steel Thickness and ir Gap harts ML-010 Rated apacity 100kg ML-030 Rated apacity 300kg ML-060 Rated apacity 300kg ML-100 Rated apacity 1 tonne ML-200 Rated apacity 2 tonne The above charts are based on flat ferrous steel plate lifted horizontally. Rated Lifting apacities Model ode orizontal Vertical ylindrical ML kg 30kg 30kg ML kg 100kg 100kg ML kg 200kg 200kg ML tonne 300kg 300kg ML tonne 600kg 600kg Working temperature to 80 o The above table is based on flat ferrous steel and must be read in conjunction with Steel Thickness and ir Gap harts opposite. 38 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 39

21 Pneumatic oists JN ir oists apacities: 250kg to 15 tonne apacities: 250kg to 20 tonne Robust onstruction Suitable for Underground Use. omplies to S ode Rated apacity ontrol Type Pull ord Pull ord Pull ord Pull ord Lift eight (m) ull Load Lift Speed (m/min) No Load Lifting Speed (m/min) ull Load Lowering Speed (m/min) No Load Lowering Speed (m/min) hain alls ir onsumption (m 3 /min) Load hain Size G Without hain UOM ach ach ach ach JN ir oists are ideal for tough industrial applications. The product's explosion protection is an important advantage for applications in hazardous areas. Manufactured to S Patented pre-lube motor design for low maintenance, oil-free operation 100% duty rating and unlimited duty cycle suits all environmental conditions Only six atmospheres of compressed air required Insensitive to dust, humidity and temperatures ranging from -20 up to + 70 TX approved models available, suitable for application in dangerous and explosive environments Self-cooling economic air motor ail-safe brake rom 1 tonne upwards available with overload protection Low decibel rating -type sensitive infinitely variable speed control for the precise positioning of loads ord ontrol or rass Pendant ontrol available, as well as an electro pneumatic interface for Radio Remote control as an option asy operation and low maintenance. 2 N 2 3 N TONN 2 N 3 TONN 3 TONN G G G G 10 TONN 10 TONN ode JN705 JN706 JN715 JN719 JN725 JN735 Model 0.25Ti 0.5Ti 1Ti 1.5Ti 2Ti 3Ti Rated apacity (t) with standard 3m lift (m) Motor Power (kw) hain imension 7 x 21 7 x 21 7 x 21 9 x 27 7 x x 36 ir Pressure (bar) ir onsumption at full load (m 3 /min) Lifting Lowering ir onnection G½ G½ G½ G¾ G½ G¾ Lifting Speed at full load (m/min) Lowering Speed at full load (m/min) TONN 6 TONN ode JN732 JN765 JN775 JN785 JN795 Model 3Ti/2 6Ti 10Ti 16Ti 20Ti Rated apacity (t) with standard 3m lift (m) Motor Power (kw) hain imension 9 x x x x x 45 ir Pressure (bar) ir onsumption at full load (m 3 /min) Lifting Lowering ir onnection G¾ G¾ G¾ G¾ G¾ Lifting Speed at full load (m/min) Lowering speed at full load (m/min) MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 41

22 imensions (in mm) JN Mini ir oists apacities: 125kg to 980kg The JN Mini Series widens the range of applications in the light duty sector as a handy, flexible and light-weight hoist. The optional Mini Manipulator can be used to lift, lower, traverse and position loads in an easy, manual manner. The carrying capacities vary from 125kg to 980kg. omplies to S Patented pre-lube motor design for low maintenance, oil-free operation 100% duty rating and unlimited duty cycle suits all environmental conditions lso suitable for horizontal pulling Self-cooling economic air motor ail-safe brake Wear resistant motor braking system Model 0.25Ti 0.5Ti 1Ti 1.5Ti 2Ti 3Ti 3Ti/2 6Ti 10Ti 16Ti 20Ti (min. headroom 1 ) G (up to hook centre) Only six atmospheres of compressed air required Insensitive to dust, humidity and temperatures ranging from -20 up to + 70 TX approved models available, suitable for application in dangerous and explosive environments xtremely sensitive lever control with emergency shut-off valve; maximum control length is 6 metres asy operation and low maintenance. ode JN123 JN253 JN503 JN603 Model MINI125 MINI250 MINI500 MINI1000 Rated apacity with standard 3 m lift Motor Output (kw) hain imensions 4 x 12 4 x 12 7 x 21 7 x 21 ir Pressure (bar) ir onsumption at full load (m 3 /min) Lifting Lowering ir onnection G3/8 G3/8 G½ G½ Lifting speed at full load (m/min) Lowering speed at full load (m/min) * ustom lift heights available. and headroom based on mini standard model with pendant control and chain bucket. ** Pneumatic trolleys and cord controls not available for this range. imensions in mm MOL MINI125 MINI250 MINI500 MINI G J K L M MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 43

23 JN Mining ir oists apacities: 1 tonne to 6 tonne The JN M-series air hoists are specifically designed for underground mining operations where loads can be lifted, lowered and horizontally pulled. ue to their versatility, they are also suitable for many different industrial applications. The M-series have the same features as the JN PROI-series, however; they operate with an air pressure of only 4 bar. omplies with S Patented pre-lube motor design for low maintenance, oil-free operation 100% duty rating and unlimited duty cycle suits all environmental conditions Insensitive to dust, humidity and temperatures ranging from -20 up to + 70 TX-approved models available, suitable for application in dangerous and explosive environments ail-safe brake, in case of air supply failure ast iron housing suitable for severe conditions asy operation and low maintenance design Two chain falls for operation in both directions Specially designed for horizontal and vertical moving of loads. PW NOR ir oists apacities: 500kg to 6 tonne Suitable for use in hazardous environments, PW nchor ir oists are fitted with rotary vane motors to ensure compactness and durability in a variety of industrial and construction applications. vailable in high and low speed models with cord or pendant controls. ode Pendant Pull ord apacity (t) Model Lift Speed (m/mm) hain alls L05TS L1TW L1TS L2TW L3TS L6TW eadroom Note: Maximum recommended pendant length 8m. Part numbers shown for standard lift models (3 metres), optional lift heights available. ode JN991 JN990 Model M64 M63 Rated apacity (t) with standard 3m lift Motor Output (kw) hain imension 9 x x 36 ir Pressure (bar) 4 4 ir onsumption at full load (m 3 /min) LIfting Lowering ir onnection Rd 32 x 1/8" Rd 32 x 1/8" Lifting speed at full load (m/min) Lowering speed at full load (m/min) * ustom lift heights available. based on standard model. Lifting speed at 2 m length of control. Longer control hoses decrease the lifting speeds. imensions in mm Model M64 M63 1 (smallest headroom with 1/1 chain strands) (smallest headroom with 1/2 chain strands) (with 1/1 chain strands) (with 1/2 chain strands) (ook opening) (ook opening) (ook opening) (maximum width) MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 45

24 TOKU ir oists TOKU TMTR Trolley ir oist Series kg apacities: 250kg to 25 tonne* Toku ir oists come in standard models up 6000kg with larger capacity 10 and 25 tonne versions available to order. The air hoists offer smooth operation and are compact and lightweight for their capacities. vailable with either cord or pendant control. Standard chain fall is 3metres, with other lengths to special order. TOKU TR ir oist kg Overload protection including auto-stop on all units (except TR-250 models) Improved and strengthened cast iron housing provides durability and reliability Solid construction with all steel/ casting construction urability The 4 lageless wheels and 2 drive wheels allow low friction and smooth stopping operation, whilst providing excellent performance utomatic rake which does not require preliminary adjustment 100% duty cycle, flame/ explosion proof motor. Limit stop prevents over-travelling of hook when the load hook reaches either highest or lowest points 100% duty cycle, flame/explosion proof motor. ode/ Model TMTR-500P TMTR- 1000P2 TMTR- 1000P TMT-2000P2 TNTR-3000P TMTR-6000P2 Trolley Model TMTN-1 TMTN-1 TMTN-1 TMTN-3 TMTN-3 TMTN-6 ailsafe mechanism ensures load cannot fall as a result of power loss Lifting apacity (W/O hain) ode/model Lifting apacity No. of hain alls Load (up) (m/min) Lifting Speed ir ons (m 3 /min) Load (own) (m/min) ir ons (m 3 /min) with 3M lift chain W/O hain Min ook istance hain imension TS-250P x TS x TS-500P x TS x TS-1000P x TS x Note: Standard Lift for all above models is 3m. Operating ir pressure is 0.6Mpa ose size ir onsumption (m 3 /min) Travelling Speed (W/O Load) (m/min) pplied eam Size Min. Radius of eam xternal imensions imensions in mm Model G TS-250P TS-250P TS TS-500P TS-500P TS TS-1000P TS-1000P TS I J K L M N O imensions in mm Model G TMTR-500P TMTR-1000P TMTR-1000P TMTR-2000P TMTR-3000P TMTR-6000P MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 47

25 WINS lectric Winches 240v 50z (Single Phase models) Robust onstruction Suitable for uilding Sites, Slipways & Industrial Use c/w 24 Volt IP65 Pendant ontrol with mergency Stop. lectric Pull Lift Winch Power Transmission is via a direct coupling, to ensure low power loss and accurate speed control The unique braking system is designed for both static and dynamic loading. Large friction area brake discs for greater efficiency will automatically apply in the event of power loss. Our design means no adjustment of the brake is necessary The gearbox housing is a one piece casting, to ensure maximum durability and resistance to wear Planetary Gears ompact design for better load sharing and reduction of the winch s overall weight. The gears are machined to provide long life and low operating noise The steel main drive gear provides maximum strength and increased life Sealed grease filled bearings fitted are lubricated for the life of the bearing Introduction type motor fitted for increased life, efficient operation and low noise output The connection of the wire rope to the winch drum is via set screw, to ensure rope retention. ode Rated apacity Speed (m/min) Motor Power (P) % ffective Pull eight (m) Wire Rope ia. x Length PL x 30 4 x 10.5Ð PL x 30 4 x 10.5Ð PL x 30 4 x 10.5Ð lectric Winches 415v 50z (Three Phase models) Robust onstruction Suitable for uilding Sites, Slipways & Industrial Use. c/w 24 Volt IP65 Pendant ontrol with mergency Stop ode Rated apacity Speed (m/min) Motor Power (P) % ffective Pull eight (m) Wire Rope ia. x Length PL x 30 4 x 10.5Ð PL x 60 4 x 10.5Ð PL x 60 4 x 10.5Ð PL x 60 4 x 10.5Ð PL x 100 PL x 120 Single Phase Model ach ach 4 x 12Ð x 30Ð Three Phase Model 48 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 49

26 lectric Mini oist 240v 50z (Single Phase model) Robust onstruction Suitable for uilding Sites omeup lectric Winches apacities: 200kg to 5 tonne ode Rated apacity Speed (m/min) Lifting eight Size (m) oist Motor Single Phase Motor Power (P) Input Power (W) % Rope ia. Rope onstruction Grade of Rope MI N/ x 19 G1960min 28 MI N/ x 19 G1960min 30 ach Lightweight and compact design for easy installation and portable use lectromagnetic spring-applied failsafe brake designed for both static and dynamic loading. pplies automatically when power loss IP65 pendant control 4V push button control supplied with all P and WG models ompact load sharing design of the heat-treated planetary gear ensures quiet operation and long life mergency stop function switch. WL Range ode WL200 WL200L WL305 Model WL200 WL200L WL301L Rated apacity Lifting Speed (m/min) Phase Voltage 240 x x x 1 Wire Rope (ø mm x m) 5 x 46 5 x 71 6 x 60 Max. Lifting eight (m) Net WL Range Mini Swivel Suspension rm Scaffold ssembly To suit eaver lectric Mini oists. ffixes to scaffolding. P Range ode W200 W250 W300 W305 W310 Model P200 P250 P300 P 500 P750T Rated apacity Lifting Speed (m/min) Phase Voltage 240 x x x x x 3 Wire Rope 6 x 30 6 x 30 6 x 30 7 x 60 9 x 60 (ø mm x m) Max. Lifting eight (m) ode Rated apacity rm Length Net P Range MI1025S WG Range ode W320 W345 W330 W350 W340 W375 W565 W750 W800 W850 Model (WG) Rated apacity Lifting Speed (m/min) Phase Voltage 240 x x x x x3 415 x x x x x 3 Wire Rope (ø mm x m) Max. Lifting eight (m) 6 x 60 6 x 30 9 x 60 9 x 60 9 x x x x x x WG Range Net MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 51

27 TOKU TW ir Winch 300kg-2000kg and Winches apacities: 300kg to 2000kg Lightweight, compact and simple placement in confined spaces is easily achieved. The all steel design provides years of trouble free operation. Units come standard with both internal automatic failsafe brake and manual band brake. Manufactured for rugged service and mining safety. Reliable in harsh environments such as heat, dust and humidity. Quick clutch allows the wire rope to be installed easily The spool valve controls the speed ual brake system for added safety. ode/model Standard inish Stainless Steel vailable Pulling apacity Noiseless vailable Net. Lifting apacity Kylan inish vailable ub iameter andle Length and orce Required W-1200 Powder-coated Yes 545 Yes Yes Ø : 1 Ø4.8 W-1800 Powder-coated Yes 820 No Yes Ø : 1 Ø6.4 W-2600 Powder-coated Yes 1200 No Yes Ø : 1 Ø8.0 W1200 Gear Ratio able iameter ode/model Lifting apacity ir Pressure (MPa) Rope Speed (m/min) ir ons (m 3 /min) Wire Rope imension (mm m) ose Size Mounting olts TW M10 4 TW TW , TW , TW , M M M M12 6 W1800 W MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 53

28 e d1 Industrial eavy uty onstruction Winch Suitable or onfined Spaces ode/model Standard inish Stainless Steel vailable Pulling apacity Noiseless vailable Net. Lifting apacity Kylan inish vailable ub iameter andle Length and orce Required S-2200 Powder-coated No 1700 No No Ø : 1 Gear Ratio able iameter Ø6.4 General Purpose and Winches ode/ Model Rated apacity Pulling (kn) Rated apacity oisting Max. and force required Type of rake Gear ratio ub iameter andle length Unit weight are Wire Rope iameter Wire Rope construction Grade of Wire Rope Gear 3.2: x 19 G G Gear 4.1: x 19 G G Gear 4.1: x 19 G G Gear 4.1:1 + 10: Gear 5.1: : x 19 G G x 19 G G2070 Wire Rope finish G 10 G 20 G 20 G 20 G 25 Wire Rope storage capacity (m) Worm rive Winch or Safe ontrolled Movement of a Load ode/model W1500 Pulling apacity 680 Lifting apacity 340 inish Powder-coated Gear Ratio 41.0 : 1 andle Length 195 ub iameter Ø48 able iameter Ø5.6 Net. 5.0 General Purpose Winch ooks Suitable for Wire & Webbing ode/model apacity d1 b e g1 UOM ach g1 b 54 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 55

29 IGITL LO LLS Portable luminium In Line System with Radio Linked igital Readout The radio linked in line tension cell range is suited to all types of load monitoring, weighing, lifting, winching and towing where connection cables are not practical. MTRILS NLING QUIPMNT Universal Plate lamps Model Type: U omplies to S 4991 Load ell Performance Specifications igh strength aircraft grade aluminium ccuracy is better than 0.5% (typically 0.1% of range) Safe overload 200% to 100t then 150% Ultimate overload 500% On/Off remotely, timed auto off 2.4Gz carrier frequency ( 100m range line of sight) apacity Length Width Plate thickness ole entres ole Size 2, , , , , , , , , * 150, * 200, * 250, * *xcludes carry case. attery life ontinuous > 40 hours (before recharge) Typical usage > 3 months Standby > 6 months *or optimum accuracy and safety, shackle size must match cell capacity. The cells from tonnes are for grade S shackle sizes. bove 100 tonne are for grade T. Nominal weight ode Non Marring (Non Marking) Plate lamps for Stainless Steel omplies to S 4991 and approved ode WLL WLL Jaw Openings Jaw Openings W L1 L2 UOM Net UOM ach W Net ach ach ach ach ach ach 22 orizontal Plate lamps Model Type: Q omplies to S 4991 ode WLL per pair Jaw Openings Max. Max Net per pair L2 L1 W L2 L1 dia Vertical Plate lamps Model Type: V omplies to S 4991 ode WLL Jaw Openings Net per pair MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 57

30 Renfroe Lifting lamps Model Type: R Locking Type apacity (Tonnes) Plate Thickness mm mm mm mm mm mm mm mm G J *Specifications are subject to change without notice PW NOR Multi irectional Lifting lamps Model Type: S complies to S ode Model WLL (t) ardness Range ffective thickness S v S v S v S v S v K S I J Model Type: JP Locking Type S R O apacity (Tonnes) Model Type: NM Locking, Screw Type apacity (Tonnes) Plate Thickness mm mm mm mm mm mm mm mm G J Plate Thickness mm mm mm mm mm mm mm mm G J *Specifications are subject to change without notice *onsult factory for possible larger capacities. Specifications are subject to change without notice Model Type: S complies to S ode Model WLL (t) ardness Range ffective thickness S v S v S v S v Model G I J K G L P Measurement diagram for SS and SS M S S S S S S S S SS S N O P L Q M N R S 58 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 59

31 G G G Single and Operated Sheave locks with Swivel ook esigned for use on mobile, overhead and truck cranes eavy uty Snatch locks eaver s new range of eavy uty Snatch locks offer the best in innovation, safety, reliability and performance with applications for construction mining, offshore exploration and the building industry. ode G Sheave ia. Wire ia. ibre Rope WLL UOM ach ach ach ach ach ach ach ach ach Solid all-steel construction asy opening mechanism ensures a fast change of wire rope while block is suspended ully machined sheave Sheave has a sealed ball bearing system,fully lubricated for maintenance free operation orged steel eye is designed to avoid twisting of unit during operation itted with grease nipples for ease of maintenance Special design of side plates restricts rope from jamming eaver eavy uty Snatch locks are operationally tested to 2 times the Working Load Limit (W.L.L.) and come with an individual test certificate ach unit is supplied complete with Grade S safety bow shackle to S2741 ll eaver eavy uty Snatch locks have an individual test serial number stamped on the identification plate Manufactured and tested to S2089. ouble Sheave locks with Swivel ook ode G Sheave ia. Wire ia. ibre Rope WLL UOM ach ach ach ach ach ach ach Super Snatch locks /W Grade S Safety ow Shackle. Shackle omplies to S2741. ode WLL (t) Wire Rope ia. Sheave ia. Grade S Safety ow Shackle to S S x 25mm S x 29mm S x 38mm S x 41mm S x 51mm S x 57mm S x 70mm MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 61

32 Gunnebo Snatch locks Wire Rope oists Gunnebo Johnson Snatch locks have the convenient side opening feature. This is true even of our heavy duty top dead-end models, and makes it easy to reeve the block without removing any fitting from the end of the wire rope. Other features include choice of swivel hook, shackle, eye fittings or Tailboard locks which have no fittings at all. Standard Rugged and reliable 4:1 design factor asy-open side plates Metric rated Large hand nuts Optional Proof load Roller bearings Marine epoxy paint eavy duty J-latch Larger sizes. eaver Tuff - Pull TM Wire Rope oists Model Type: TP -/w 20m of Wire Rope. omplies to S1418.2* ompact Steel ousing (Orange) ode Rated apacity Pulling Rated apacity Lifting Wire Rope ia. Std Rope Length (m) Rope advanced per full stroke cycle ffort on handle at rated lifting capacity; orward operation. (kn) Nett weight Wire Rope and Reel Nett weight without Wire Rope N N N X Retainer on latch pin nchor shackle with retainer pin ronze bushing. ode apacity WLL (t) Standard Wire Rope Size Max. llow Optional WT J K L oncrete Lifting lutch S 2S 3S S 4S 4S S 4S 6S S 8S 6S S 8S 8S S 8S 10S S 12S 10S S 15S 14S S 20S 16S S 30S 20S ode W.L.L. Tonne J K I Net kg T ach T ach T ach T ach T ach T ach UOM 62 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 63

33 W W e e MIN MX Railway Line Lifting Tongs ode WLL L1 min L1 max L2 min L2 max min max W UOM R ach W L2 MIN L2 MX rum ooks rop forged Grade 80 eat treated, Painted Yellow omplies to S 3776 for Grade 80 ittings ode WLL per pair Grade 80 hain d c Net per Pair UOM ach d d L1 MIN L1 MX Vertical rum Lifting lamps rum Lifting Sling ssembly omplies to S 4991 Including oblong link, chain connectors, grade 80 alloy chain & rum hooks. Intended for use with steel 205 Litre (ie. 44 gallon) drums in accordance with the diagram as displayed complying to ustralian Standard for hain Slings. ode WLL (t) Type L rum Size (l) Net UOM ode WLL Grade 80 hain hain Length (m) W rum Size (l) Net K ach UOM Vertical ach L W orizontal rum Lifting lamps omplies to S 4991 ode WLL (t) Type L rum Size (l) Net orizontal ach UOM L 64 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 65

34 Pipe Lifting Lug & ar and Pallet Trucks nd Trolleys The Pipe Lifting Lug and ar is designed for the lifting of concrete pipes via holes in the pipe walls. The lug is fed down through a hole in the pipe wall and the bar is positioned through the eye inside the pipe to secure the connection. and Pallet Trucks offer the ideal solution for transporting palleted goods easily and safely in warehouses, terminals, delivery/ receiving docks, storage and cool rooms. Manufactured and tested to S4991 (NT certificate issued). and Pallet Trucks (Powder oated inish) and Pallet Trucks (Powder oated inish) with rake omplies to S2615. omplete with PU Wheels omplies to S2615. omplete with PU Wheels escription Pipe Lifting ar 2.5 tonne capacity Pipe Lifting ar 5.0 tonne capacity Pipe Lifting Lug 2.5 tonne capacity Pipe Lifting Lug 5.0 tonne capacity PT342601S x x x ode Model No. apacity Min. ork eight Min. ork eight Steering Wheel S Size of ork Width Overall orks ork Length Overall Length L eight of ackplate Overall eight Nett PT x x x ode ode Model No. apacity Min. ork eight Min. ork eight Steering Wheel S Size of ork Width Overall orks ork Length Overall Length L eight of ackplate Overall eight Nett Pipe nd Lifters 202 Robertsons Pipe nd Lifters are designed for lifting pipes using a two legged chain sling. The hooks are designed so that at the correct sling angle, the forces generated work to keep the hooks in place. vailable in 2.5 tonne and 5 tonne capacities Supplied painted yellow (can be supplied hot dip galvanised if required). Optional extras 202 andle on the rear for easy fitment Varying pad and bash pad configurations. Manufactured and tested to S4991 (NT certificate issued). Note: Please contact your local Robertsons branch for product code details and to place an order. S L S L 66 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 67

35 LITPL and Scissor Lift Tables have special applications for raising heavy loads with the use of hydraulics which increases safety and helps prevent back injuries. They are a safe and versatile way to transport goods in warehouses, workshops, libraries, loading docks, hospitals, assembly lines, offices and nurseries. igh quality durable powder coated finish on all models. Scissor Lift Tables & and Trolleys ydraulic Scissor Lift Tables (three stage) omplete with PU Wheels for which the Rear Wheels have hand locking devices ydraulic Scissor Lift Tables (two stage) omplete with PU Wheels for which the Rear Wheels have hand locking devices ode Model No. T15 T30 T50 apacity Min. Table eight Max. Table eight Table Length L Table Width W Table Thickness T astor Wheel 100 x x x 40 oot Pedal ycles to Max eight <=28 <=39 <=27 Net eight of andle from Ground ode Model No. T35 apacity 350 Min. Table eight 375 Max. Table eight 1365 Table Length L 910 Table Width W 500 Table Thickness T 53 astor Wheel 125 x 40 oot Pedal ycles to Max eight <=53 Net 136 eight of andle from Ground 965 T W L W L T Steel and Platform Trolleys omplete with PU lack Wheels ode Model No. PT015 PT025 apacity Platform Length L Platform Width W eight Net MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 69

36 Steel 2 Tier and Platform Trolleys omplete with Nylon lack Wheels ode Model No. SS22 apacity 120 Platform Length L 475 Platform Width W 735 eight 8650 astor Wheel 100 x 35 Net 15.6 MNUTUR & NGINR PROUTS orklift ttachments Type SL1 rum Lifter esigned for standard 205 litre steel drums, the fully automatic clamping action enables safe and precise placement of drums without the operator having to leave the drivers seat. The arms will engage around the drum and lock under the rolling hoop when raised. The SL2 will handle either a single drum or two drums. Zinc plated finish. Steel 3 Tier and Platform Trolleys omplete with Nylon lack Wheels Model No. of rums SWL ork Pocket entres ork Pocket Size Load entre Unit ode Model No. SS32 apacity 120 Platform Length L 475 Platform Width W 735 eight 8650 astor Wheel 100 x 35 Net 20.6 SL x SL1 Stainless Steel 2 Tier and Platform Trolleys omplete with Nylon White Wheels SL2 ode S Model No. T122S apacity 100 Platform Length L 480 Platform Width W 710 eight 800 astor Wheel 100 x 35 Net MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 71

37 Type JS25 ixed Jib Short 2.5 Tonne Type JS50 ixed Jib Short 5 Tonne The JS2.5 ixed Jib allows for additional lifting height with the extension beam being raised above the fork pockets. The overall length when retracted is 1.3 metres, and when extended is 2 metres. Zinc plated finish. The JS5 ixed Jib has a 1.96 metre reach when fully extended, and an overall length of 1.3 metres when retracted. The jib is secured to the forklift by a safety chain. Zinc plated finish. Safe Working Load: 2500 kg Max Safe Working Load: 4750 kg Max ork Pocket Size: 185 mm x 65 mm ork Pocket Size: 185 mm x 75 mm ork Pocket entres: 250 mm ork Pocket entres: 275 mm Unit : 100 kg. Unit : 130 kg. JS2.5 ixed Jib Safe Working Load (SWL) per position POSITION XTNSION SWL JS5 ixed Jib Safe Working Load (SWL) per position POSITION XTNSION SWL Type JL25 ixed Jib Long 2.5 Tonne The JL25 has a 3.5 metre extension which allows for long reach lifts. The overall jib length when retracted is 2.1 metres. Zinc plated finish. Safe Working Load: 2500 kg Max ork Pocket Size: 185 mm x 65 mm ork Pocket entres: 250 mm Unit : 130 kg. JL25 ixed Jib Safe Working Load (SWL) per position POSITION XTNSION SWL Type JL50 ixed Jib Long 5 Tonne The JL50 ixed Jib has a 3.5 metre reach when fully extended, and an overall jib length when retracted of 2.1 metres. Zinc plated finish. Safe Working Load: 4750 kg Max ork Pocket Size: 185 mm x 75 mm ork Pocket entres: 275 mm Unit : 170 kg. JL50 ixed Jib Safe Working Load (SWL) per position POSITION XTNSION SWL MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 73

38 Type SJ200 orklift Slip-On Jib Type WP25 Work Platform esigned as a simple slip-on jib attachment with two hook positions 500mm apart. oth hook positions have an SWL of 2000kg. This jib attachment is held to the forklift by a safety chain and comes complete with a safety swivel hook. vailable in either galvanised or painted enamel finishes. Safe Working Load (SWL) 2000kg The WP25 Work Platform has been designed for forklift use to safely carry out tasks of short duration and occasional usage such as maintenance or stocktake. Manufactured strictly in accordance with ustralian Standard S , the type WP25 Work Platform is suitable for a maximum of two people. Supplied with slipper locking pins and 2 harness anchor rings. Unit is supplied standard as a latpack (1230 x 1150 x 200mm), or may be fully assembled upon request. Zinc plate finish. Unit 37kg Safe Working Load: 250 kg Load entre 1000mm Load entre: 600 mm Pocket Size 140 x 65 Unit : 110 kg Pocket entres 250 mm ork Pocket Size: 160 mm x 65 mm orizontal of G 570mm ork Pocket entres: 640 mm. Vertical of G 30mm. Type SJW Wide Pocket Jib The SJW style jib is fitted with wide spaced fork pockets, and provides 2 lifting positions 550 mm apart. This is a simple slip on style jib, and is supplied with safety swivel hook. Zinc plated finish. Specials Type SWL Max. /550 SWL Max. /110 ork Pocket size ork Pocket entres SJW x SJW x SJW x SJW 11 11, x Unit weight PLS NOT: The use of a WP25 Work Platform on a forklift truck should not be considered if the capacity of that forklift is less than 1800 kg for a counterbalanced type or 1080 kg for a straddle type forklift. Type G15 Goods age The G15 forklift goods cage is suitable for storage and transport of furniture and whitegoods, and is ideal for the transportation of goods between ground and mezzanine levels. namel paint finish. The G15 forklift goods cage is NOT designed or certified to convey personnel. Safe Working Load: 1000 kg Load entre: 600mm ork Pocket Size: 185 mm x 85 mm Unit : 130kg. ork Pocket entres: 800 mm Type Width epth eight G Unit 74 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 75

39 Type ork xtension Slippers The ork xtension Slippers extend the versatility of the fork truck. These slim profile slippers have been designed and manufactured in accordance with S In accordance with S slippers used for general usage should be no longer than 167% of the supporting tine s length. If the slippers are longer than 167%, then the usage of those slippers shall be restricted to their specified application. Made from high tensile grade steel. Zinc plated for corrosion protection (Type SL Painted) igh Safe Working Load (SWL) rating Supplied with toggle locking pins itted with rating plate P2000 ulk ag Lifter two prong ulk ag lifter for container loading. The Operator need not leave their seat to disengage the bag. Optional stand is available. Safe Working Load (SWL) 2000kg Unit 200kg Load entre 725mm eight above arriage 378mm Prong entres 800mm lass 2 Mounting. (lso available with lass 3 Mounting) Supplied with instructions. Type Length To suit max tine size per pair Rating per pair Type Length To suit max tine size per pair Rating per pair x x kg 8500kg x x SWL at SWL at x x mm L 600mm L x x x SL kg 8000kg x SL SWL at SWL at x SL mm L 600mm L x SL x SL ustom kg built 12000kg x SL SWL at to SWL at x SL mm L suit mm L x SL x SL kg SL SL SWL at 600mm L 200 Slip-On ulk ag Jib esigned with 4 lifting points to suit standard ulk ags. The Jib is fitted with four (4) safety swivel hooks. Pocket Size 185 x 85mm Pocket entres 500mm Safe Working Load (SWL) 2000kg Unit 60kg Load entre 450mm ook entres 800mm. Type P 2200 Pallet ook The P 2200 pallet hook is a versatile unit which features adjustable body height and fork tine width positioning, which makes this unit ideal for the transport and construction industry. Load balancing is carried out by positioning the lifting ring to suit the centre of gravity of the load. Zinc plated finish. Safe Working Load: 2200 kg Load entre: 600 mm Unit : 215 kg. 76 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 77

40 rane ages Note: ll crane work platform cages we supply are designed and manufactured in accordance with S , and are supplied with load test certificate, instruction manual, risk control measures and Workover registration. ork pockets fitted for transport purposes only. Personnel cages are supplied with chains, safety harness anchor points, and are zinc plated. Type WP-NR ertified for 4 people, with mesh roof, zinc plated. Type WP-N ertified for 4 people, no roof, zinc plated. Maximum capacity: 4 people Safe Working Load: 500 kg Unit : 270 kg ork Pocket Size: 165 mm x 65 mm ork Pocket entres: 775 mm Supplied with lifting chains. Maximum capacity: 4 people Safe Working Load: 500 kg Unit : 310 kg ork Pocket Size: 165 mm x 65 mm ork Pocket entres: 775 mm Supplied with lifting chains. Type WP-N2R ertified for 6 people, zinc plated. This age can also be manufactured to suit irst id Rescue by fitting an outward opening gate. Please specify when ordering. Maximum capacity: 6 people Safe Working Load: 750 kg Unit : 500 kg ork Pocket Size: 245 mm x 65 mm ork Pocket entres: 950 mm Type WP-4 One person cage, without roof Maximum capacity: 1 person Safe Working Load: 250 kg Unit : 120 kg ork Pocket Size: 165 mm x 65. Supplied with lifting chains. 78 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 79

41 Type WP-8 Storage ages Single person cage, fitted with mesh roof Type SPN-01 Goods age Maximum capacity: 1 person Safe Working Load: 250 kg Unit : 150 kg Safely convey loose or palletised goods using either forklift or crane. ull width gate allows for 1200mm square pallets to be placed inside. itted with crane lifting lugs, fork stirrups and interlocking feet, this versatile cage can also be safely stacked. Zinc plated finish. ork Pocket Size: 165 mm x 65 mm Safe Working Load: 1000 kg ork Pocket entres: 555 mm. Unit : 175 kg. Type WP-6 6 person cage, fitted with full mesh infill. The front mesh panel above handrail height is removable for working access. eaver Oxygen/cetylene Gas ottle Trolley esigned for use as trolley, lifting frame or use with a forklift. ode apacity W UOM T ach Maximum apacity: 6 people Safe Working Load: 900 kg Unit : 700 kg. W 80 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 81

42 Type G-M2 Storage age - ssembled Secure gas cylinder storage cage, suitable for environments such as building sites and mines. age is fitted with crane lifting lugs, and fork pockets underneath. age is fitted with a lockable door, and has a full metal roof providing weather protection. securing load binder prevents cylinder movement during transport. Zinc plated finish. Safe Working Load: 750 kg Unit : 180 kg ork Pocket Size: 165 mm x 65 mm ork Pocket entres: 805 mm. Type MM-01 Mesh age stackable transport and storage cage, ideal for production, warehousing and component storage applications. asily collapsible for space saving during transport, the MM-01 is assembled without any tools in seconds. age is fitted with a drop down access gate allowing easy access to the base, even when stacked. The MM-01 cage can be transported by forklift or pallet trolley, and can be stacked 2 high when fully loaded, making this cage suitable for racking or stand alone applications. ront and rear panels are removable. Load apacity: 1000 kg Unit : 94 kg ollapsed eight: 248 mm Powder coated frame / zinc plated insert panels. Internal Width Internal epth Internal eight Overall Width Overall epth Overall eight latpack version (Type G-M2) Type G-S Gas ottle Storage age The G-S gas cylinder cage is designed for storage and transportation of gas cylinders either by forklift or by overhead crane. The cage is fitted with 4 crane lugs and fork access underneath. This stackable cage is fitted with double 270 degree opening gates for easy access, and is supplied with load binder to securely fasten cylinders. The cage can be supplied fully assembled or as a flatpack for on-site assembly. Zinc plated finish. Safe Working Load: 1000 kg Unit weight: 170 kg. 82 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 83

43 Telescopic ombination Lifting eam/spreader ars apacity: 6 tonne to 50 tonne The Maxirig Telescopic Spreader eam is designed for a variety heavy lifting applications. esigned to function as a spreader bar in the 60, 90 and 120 positions, it can also be used as a lifting beam from the centre lift (lug) position. The product is supplied with a proof load test certificate, MPI welding inspection report and certificate of conformance to ustralian Standards (S4991). Prior to conducting any operations with this device, a lift study must be undertaken noting the capacity of the device in its various configurations. Shackles To Suit: Please use Grade S Safety ow Shackles. Maxibar Modular Spreader ars/systems apacity: 4 tonne to 145 tonne Meets: ustralian Standard S Maxibar Modular Spreader ars are designed for heavy lifting applications including major construction projects. ach bar features heavy duty fittings and operates in the 60, 90 and 120 positions.. ach modular spreader bar is supplied with a proof load test certificate, MPI welding inspection report and certificate of conformance to ustralian Standards (S4991). Prior to conducting any operations with this device, a lift study must be undertaken noting the capacity and tare weights of the device in its various configurations. Note: or further technical information including Working Load Limits at various angles, approximate sling leg lengths and headroom, please contact Robertsons for a detailed data sheet. ode WLL as Spreader at 60 (nd Lift) (t) WLL as Lifting eam (entre Lift) (t) Span Width Min (m) Max (m) TR Top Lifting Lugs Size (Grade S Safety ow Shackle) (t) Lower Load Lugs (Grade S Safety ow Shackle) (t) TS N/ N/ TS N/ N/ TS N/ N/ TS TS N/ N/ TS TS TS TS TS TS TS entre Lug (Grade S Safety ow Shackle) (t) ode Note: or further technical information including Working Load Limits at various angles, approximate sling leg lengths and headroom, please contact Robertsons for a detailed data sheet. WLL as Spreader at 60 (t) Span Width Min Max at max WLL (m) Max Span Width (m) TR Top Lifting Lugs (Shackle size) (t) Maxibar Maxibar Maxibar Maxibar Maxibar Maxibar Maxibar Maxibar Maxibar Maxibar k Lower Load Lugs (Shackle size) (t) *Using the maximum span width of each Maxibar will reduce the WLL on all models except the Maxibar 4, 8 and 15. Please refer to detailed data sheets available from your local Robertsons branch, for further information Mtrs Maximum Span Note: or approximate sling lengths and headroom, please refer to the relevant product data sheet. xample of a 60T Modular Spreader ar showing length of each module within the beam. 84 MIL info@bunzlsafety.com.au bunzlsafety.com.au LL LL bunzlsafety.com.au MIL info@bunzlsafety.com.au 85