65-ton (60.0 mt) Rough Terrain Crane

Transcription

1 65-ton (60.0 mt) Rough Terrain Crane 65 tons (60.0 mt) at 9 ft (2.50 m) radius ft ( m) four section, full power boom with quick reeve boom head Boom wear pads have Tefl on pucks that lubricate the boom sections (no grease) Two boom extend modes A-max and standard boom lifting capacities ft ( m) two piece, on-board lattice fl y with 2, 15, 30, and 45 offsets One 16 ft (4.9 m) lattice insert plus 58 ft (17.7 m) two-piece offsettable fl y option Two 16 ft (4.9 m) lattice inserts plus 58 ft (17.7 m) two-piece offsettable fl y option No deducts for stowed attachments 211 ft 7 in (64.5 m) maximum tip height 17,182 lbs ( kg) maximum winch line pull 459 fpm (139.9 m/min) maximum winch line speed Next generation operator s cab with improved visibility and ergonomics 225 hp (168kW) Caterpillar engine with 644 ft-lbs (873J) of torque Spicer 6-speed power shift transmission 4x2 and 4x4 drive with 26.5x25-26PR tires Four steering modes: independent front, combination, crab, and independent rear 4 link rear suspension with optional hydro-gas suspension Travel/working weight under 90,000 lbs ( kg)

2 65-ton (60.0 mt) Rough Terrain Crane Remarkable control, reliability and capacity performance Caterpillar 3126B electronic engine with 225 hp (168 kw) provides 646 lb-ft (876 Nm) of torque Electronic throttle for improved throttle response Two automotive-style batteries linked in parallel and provide 700 cold cranking amps each for cold weather starting Rugged, lightweight steel pontoons Hydraulic disc brakes for both service brakes and parking brake Metri-Pak wire harnesses have sealed relays and connectors throughout for outstanding long-term reliability. All wires have fl ame retardant polyethylene insulation, resulting in a higher heat resistant wiring system. 4-section full power boom with attachment flexibility Full power 38 ft to 115 ft (11.6 m to 35.0 m) four-section boom with two extend modes: A-max and fully synchronized Boom wear pads have Tefl on pucks that lubricate the boom sections (no grease) Maximum tip height is 211 ft 7 in (64.5 m) with the attachment and main boom used in combination Optional 35 ft (10.7 m) one-piece lattice fl y and optional 35 ft to 58 ft (10.7 m to 17.7 m) twopiece bi-fold lattice fl y are offsettable to 2, 15, 30 and 45. Optional 16 ft (4.9 m) lattice insert used alone or with 58 ft (17.7 m) two-piece offsettable fl y Optional two 16 ft (4.9 m) lattice inserts plus 58 ft (17.7 m) two-piece offsettable fl y Operator cab features Extra large front window almost seamlessly merges into the roof window Sliding left side door, right and rear windows, and swing up top window provide excellent ventilation All gauges, switches, indicators, and controls are placed in the operator s forward line of sight for excellent ergonomics All gauges and switches are backlit for excellent visibility when the cab working lights are switched to the on position Integral rated capacity limiter aids operator in safe and effi cient operation by continuously monitoring boom length, boom angle, head height, radius of load, machine confi guration, allowed load, and percent of allowed load. Available Integrated air conditioning utilizes the same ventilation outlets as the standard heating system Powerful hydraulics For greater productivity and control, the four-pump hydraulic circuit allows simultaneous function of boom hoist, winch and swing. Piston motor hydraulic hoist system delivers superior hoisting. Matched sizes of main and auxiliary winches provide equal maximum available line pulls of 17,182 lbs ( kg) and maximum line speeds of 459 fpm (140 m/min) on 13" (33 cm) root diameter drums. Job site maneuverability CALC Outrigger beams have three different stages (retracted, intermediate, and fully extended) providing lifting capacities in confi ned areas. Steering modes are chosen and performed with the steering wheel and include independent front steer, independent rear, four wheel steer, and "crab" steering. Link-Belt Construction Equipment Company - Lexington, Kentucky Link-Belt is a registered trademark. Copyright All rights reserved. We reserve the right to change designs and specifi cations at any time. Litho in U.S.A. 11/ #4317

3 Telescopic Boom Rough Terrain Crane RTC ton (58.97 metric tons) 38 0 (11.58 m) C L of Rotation 7 0 (2.13 m) 7.25 (0.18 m) RTC (2.88 m) A B 3 9 (1.14 m) 3 3 (0.99 m) 4 10 (1.47 m) D C C 45 9 (13.94 m) (2.07 m) 11 9 (3.58 m) (8.32 m) (1.77 m) 11 6 (3.51 m) (3.31 m) General Dimensions feet meters Tailswing of Counterweight Turning radius (4 wheel steer centerline of tires) Turning radius (2 wheel steer centerline of tires) Turning radius (4 wheel steer outside front carrier corner) Turning radius (2 wheel steer outside front carrier corner) E F (2.50 m) Centerline of tires Full Retraction (3.07 m) Intermediate Extension (5.00 m) Full Extension 23 0 (7.01 m) G Tire Size Dimension 29.5 x R 25 A (3.93 m) (3.97 m) B (2.42 m) (2.44 m) C 2 8 (0.81 m) 2 9 (0.84 m) D 12 5 (3.78 m) 12 6 (3.81 m) E 8.25 (0.21 m) 7 (0.18 m) F (0.64 m) (0.64 m) G (0.29 m) (0.31 m) Litho in USA 10/03 #5397 Supersedes #5372

4 Upper Structure Boom Patented Design Boom side plates have diamond shaped impressions for superior strength to weight ratio and 100,000 psi (689.5 mpa) steel angle chords for lateral stiffness. Boom telescope sections are supported by top, bottom, and adjustable side wear shoes to prevent metal to metal contact. Standard Boom ( m) four section full power boom Basic mode (or mode B ) is the full power, synchronized mode of telescoping all sections proportionally 115 (35.05 m). The exclusive A max mode (or mode A ) extends only the inner mid section to 63 6 (19.35 m) offering increased capacities for in close, maximum capacity picks. Mechanical Boom Angle Indicator Boom Head Five 16.5 (0.42 m) root diameter nylon sheaves handle up to ten parts of wire rope. Quick reeve design. Boom head designed for quick reeve of hook block. Rope dead end lugs provided on each side of boom head. Easily removable wire rope guards. Fly pinning alignment tool. Boom Elevation Hydraulic cylinder with holding valve and bushing in each end. Hand control for controlling boom elevation from 3 to +78. Optional Auxiliary Lifting Sheave Single 16.5 (0.42 m) root diameter nylon sheave with removable wire rope guard mounted on boom. Use with one or two parts of line. Does not affect erection of fly or use of main head sheaves for multiple reeving. Optional 70 ton (63.5 mt) 5 sheave, quick reeve hook block 60 ton (54.43 mt) 4 sheave, quick reeve hook block 40 ton (36.28 mt) 4 sheave, quick reeve hook block 8.5 ton (7.7 mt) hook ball Boom floodlight Fly Optional 36.5 (11.13 m) one piece lattice fly, stowable, offsettable to 1, 15 or ( m) two piece (bifold) lattice fly, stowable, offsettable to 1, 15 or 30 Cab and Controls Environmental ULTRA CAB LFC 2000 construction process featuring laminated fibrous composite material. Isolated from sound and vibration by a neoprene seal. Six way adjustable operator s seat with retractable seat belt. Four way adjustable tilting and locking steering wheel. All windows are tinted and tempered safety glass. Slide by door opens to 3 (0.91 m) width. Sliding rear and right side windows and swing up roof windows for maximum visibility and ventilation. Engine dependent warm water heater with defroster. Hand held outrigger controls. Sight level bubble Hand throttle Audible swing alarm Warning horn Backup alarm Travel lights Cab mounted work lights Sun visor Electric windshield wiper Mirrors Top hatch window wiper Cup holder Fire extinguisher Dome light Circulating fan Optional Amber strobe light and rotating beacon Emergency steering system Rear steer indicator Air conditioning Controls Hydraulic controls (joystick type) for: Main winch Boom hoist Drum rotation indicators Swing Optional auxiliary winch Optional single axis controls Foot controls for: Boom telescope Swing brake Engine throttle with throttle lock Cab Instrumentation Corner post mounted gauges for: Hydraulic oil temperature Fuel Convertor temperature Voltmeter Water temperature Oil pressure Tachometer Audio/visual warning system Rated Capacity Limiter Microguard 434 Graphic audio visual warning system built into dash with anti two block and function limiters. Operating data available includes: Crane configuration Boom length Boom angle Head height Radius of load Allowed load Actual load % of allowed load Presettable alarms include: Maximum and minimum boom angles Max tip height and boom length Swing left/right positions Operator defined area alarm is standard. Anti two block weight designed for quick reeve of hookblock. Optional Internal RCL light bar: Visually informs operator when crane is approaching maximum load capacity with a series of lights; green, yellow, and red. External RCL light bar: Visually informs ground crew when crane is approaching maximum load capacity kickouts and presettable alarms with a series of lights; green, yellow, and red. Swing Bi directional hydraulic swing motor mounted to a planetary reducer for 360 continuous smooth swing at 2 r.p.m. Swing park brake 360 electric over hydraulic (spring applied, hydraulic released) multi disc brake mounted on the speed reducer. Operated by toggle switch in overhead control console. Swing brake 360, foot operated, hydraulic applied disc brake mounted on the speed reducer. Travel swing lock Standard; two position travel lock (pin device) operated from the operator s cab. Counterweight Pinned to upper structure frame. 12,000 lb (5 443 kg). Optional hydraulically controlled counterweight removal. Optional 360 (pawl in gear) swing lock (meets New York City requirements). Hydraulic System Main Pump Four section gear type pump Combined pump capacity 132 gpm (500 Lpm) Mounted on torque converter, powered by engine through a pump disconnect Pump disconnect is a spline type clutch engaged/disengaged from carrier. Pump operates at 3,500 psi (24.1 mpa) maximum system pressure. O Ring Face Seal (ORFS) technology throughout with hydraulic oil cooler. Pilot Pressure / Brake / Counterweight Removal Pressure compensated piston pump powered by carrier engine. Operates at 2,650 psi (18.3 mpa) maximum. Telescope/Outrigger/Steering Pump Single gear type pump, 24 gpm (91 Lpm) maximum. Mounted on torque converter, powered by engine through a direct mechanical drive. Pump operates at 3,000 psi (20.7 mpa) maximum system pressure. Reservoir 170 gal (643.5 L) capacity. Diffuser for deaeration. Filtration One, 10 micron filter located inside hydraulic reservoir. Accessible for easy replacement. RTC 8065

5 Control Valves: Six separate pilot operated control valves allow simultaneous operation of all crane functions. Load Hoist System Standard 2M rear winch with grooved lagging Two speed motor and automatic brake Power up/down mode of operation Controls for future addition of auxiliary winch. Bi directional piston type hydraulic motor, driven through a planetary reduction unit for positive operator control under all load conditions. Asynchronous parallel double crossover grooved drums minimize rope harmonic motion. Winch circuit control provides balanced oil flow to both winches for smooth, simultaneous operation. Line Pulls and Speeds Maximum line pull 16,506 lb (7 487 kg) and maximum line speed of 454 f.p.m. (138.4 m/min) on standard 16 (0.41 m) root diameter grooved drum. Rotation resistant rope Optional 2M front winch with two speed motor and automatic brake, power up/down mode of operation. Hoist drum cable followers Third wrap indicators Carrier Type (3.31 m) wide, 151 (3.84 m) wheelbase. 4 x 4 x 4 (4 wheel steer, 4 wheel drive) For rough terrain with limited turning area. Frame 100,000 psi (689.5 mpa) steel, double walled construction. Integral 100,000 psi (689.5 mpa) steel outrigger boxes. Standard Carrier Equipment Two front, rear, and mid point carrier steps. Non slip safety strips on carrier deck Deep front storage Fenders Pontoon storage Full lighting package Front towing shackles Optional Front and rear mounted pintle hook Front tow winch Engine Engine Caterpillar 3126B 7.2L Cylinders cycle Bore Stroke Displacement Maximum brake hp Peak torque (ft. lb.) Electric system Starting system Fuel capacity Alternator Crankcase capacity (total system) in. (110 mm) 5.00 in. (127 mm) 442 cu. in. (7.2 L) 2,200 rpm 1,500 rpm 12 volt 12 volt 95 gal (359.6 L) 130 amps 30 qt (28.4 L) Water/fuel separator on engine ther injection package Transmission Spicer off highway three speed, two range power shift transmission. Six speeds forward and reverse. Front axle disconnect for two or four wheel drive. Axles Front and Rear Heavy duty planetary drive/steer type Front axle disconnect Suspension Front Axle Rigid mounted to frame Rear Axle Pin mounted on bronze bushings. Automatic hydraulic rear axle oscillation lock out cylinders engage when upper structure rotates 2.5 past centerline. Steering Hydraulic two wheel, four wheel, and crab steering. Modes selected by toggle switch on dash. All modes fully controlled by steering wheel. Optional Rear steer indicator Tires Front and Rear Standard 29.5 x 25 (28 PR) Earthmover type Optional 29.5R25 XHA 1 star radials Spare tires and rims. Brakes Service Hydraulic disc type brakes at each wheel end. Parking/Emergency Disc type, spring applied, hydraulic released, fade resistant, operated from cab, mounted on front axles. Outriggers Three position operation capability. Four hydraulic, telescoping beam and jack outriggers. Vertical jack cylinders equipped with integral holding valve. Beams extend to 23 0 (7.01 m) centerline to centerline and retract to within (3.31 m) overall width. Equipped with stowable, lightweight 23.5 x (59.7 x 69.2 cm) hexagonal steel pontoons. Controls and sight level bubble located in cab. Confined Area Lifting Capacities (CALC ) System Three operational outrigger configurations are available: Full extension 23 0 (7.01 m) Intermediate position (5.00 m) Full retraction (3.07 m) For confined area operation, rated lifting capacities are provided for the intermediate and fully retracted outrigger positions. When the outrigger position levers (located on the outrigger beams) are engaged, the operator can set the crane in the intermediate or full retraction outrigger position without having to leave the cab. Optional Outrigger cover package Travel Speeds and Gradeablity Tires 29.5 x 25 Maximum Speed 19.5 mph (31.4 km/h) Gradeablity at 70% convertor efficiency 112.9% Maximum Tractive Effort at 70% convertor efficiency Gradeablity at 1.0 mph (1.6 km/hr) Maximum Tractive Effort at 1.0 mph (1.6 km/hr) 76,715 lb ( kg) 55.6% 50,516 lb ( kg) Crane operating angle must not exceed 35 (77% grade). Numbers reflect main hydraulic pump engaged. 3 RTC 8065

6 Axle Loads Base crane with standard Upper facing front Upper facing rear ( m) four section boom, 2M G.V.W. main winch with 2 speed hoisting and Front axle Rear axle Front axle Rear axle power up/down, 630 (192 m) 3/4 (19 mm) wire rope. 4x4x4 carrier with Cater- lb kg lb kg lb kg lb kg lb kg pillar 3126B 7.2L engine, 29.5 x 25 tires, counterweight, and no fuel. 91, , , , , Remove 29.5 x 25 tires and wheels 6, , , , , R25 XHA Tires Remove outrigger beams 5, , , , , Tow winch , , gal (378.5 L) fuel M auxiliary winch with 630 (192 m) of 3/4 (19 mm) rope Remove front carrier counterweights , , , Hydraulic counterweight removal Remove counterweight 12, , , , , Air conditioning (11.13 m) one piece lattice fly, with tip lugs, stowable ( m) two piece (bifold) lattice fly, stowable 1, , , , , , , , Fly storage brackets with all fly options Auxiliary lifting sheave assembly ton (7.71 mt) hook front bumper n/a n/a n/a n/a 70 ton (63.50 mt) 5 sheave hook front bumper 60 ton (54.43 mt) 4 sheave hook front bumper 1, , n/a n/a n/a n/a 1, , n/a n/a n/a n/a Adjust gross weight and axle loading according to component weight. Note: All weights are 3%. Tire 29.5 x 25 (28 PR) 29.5R25 XHA 1 Star Max. Axle 20 mph (32.2 km/hr) 53,000 ( kg) 53,000 ( kg) Link Belt Construction Equipment Company Lexington, Kentucky Link Belt is a registered trademark. Copyright All rights reserved. We are constantly improving our products and therefore reserve the right to change designs and specifications. RTC 8065

7 5488 (supersedes 5453) J9 1 Technical Data Specifications & Capacities Telescopic Boom Rough Terrain Crane 65 ton (60.0 metric ton) CAUTION: This material is supplied for reference use only. Operator must refer to in---cab Crane Rating Manual and Operator s Manual to determine allowable crane lifting capacities and assembly and operating procedures. Link-Belt Cranes RTC II

8 5488 (supersedes 5453) J9 RTC II Link-Belt Cranes

9 5488 (supersedes 5453) J9 Table Of Contents Boom, Attachments, and Upper Structure... 1 Boom... 1 Boom Head... 1 Boom Elevation... 1 Auxiliary Lifting Sheave --- Optional... 1 Hook Blocks and Balls --- Optional... 1 Fly --- Optional... 1 Fly Inserts --- Optional... 1 Operator s Cab and Controls... 1 Swing... 2 Electrical... 2 Load Hoist System... 3 Load Hoist Performance M Main and Optional Auxiliary Winches... 3 Hydraulic System... 3 Counterweight... 3 Carrier... 4 General... 4 Outriggers... 4 Steering and Axles... 4 Suspension... 4 Tires and Wheels... 4 Brakes... 4 Electrical... 4 Engine... 4 Transmission... 4 Carrier Speeds and Gradeability... 5 Fuel Tank... 5 Hydraulic System... 5 Pump Drive... 5 Axle Loads... 6 General Dimensions... 7 Working Range Diagram... 8 Boom Extend Modes... 9 Main Boom Lift Capacity Charts -- Standard Fully Extended Outriggers Rotation On Tires --- Stationary --- Boom Centered Over Front Between Tire Tracks On Tires --- Pick & Carry (Creep) --- Boom Centered Over Front On Tires --- Stationary Rotation Fly Attachment Lift Capacity Charts -- Optional Fully Extended Outriggers Rotation ft Main Boom Length Fly Offset ft Main Boom Length Fly Offset ft Main Boom Length Fly Offset ft Main Boom Length Fly Offset Link-Belt Cranes RTC II

10 5488 (supersedes 5453) J9 Main Boom Lift Capacity Charts -- Metric Fully Extended Outriggers Rotation On Tires --- Stationary --- Boom Centered Over Front Between Tire Tracks On Tires --- Pick & Carry (Creep) --- Boom Centered Over Front On Tires --- Stationary Rotation Fly Attachment Lift Capacity Charts -- Optional Fully Extended Outriggers Rotation m Main Boom Length Fly Offset m Main Boom Length Fly Offset m Main Boom Length Fly Offset m Main Boom Length Fly Offset RTC II Link-Belt Cranes

11 5488 (supersedes 5453) J9 1 Boom, Attachments, and Upper Structure J Boom Design --- Four section, formed construction of extra high tensile steel consisting of one base section and three telescoping sections. The first telescoping section extends independently by means of one double---acting, single stage hydraulic cylinder with integrated holding valves. The second and third telescoping sections extend proportionally by means of one double---acting, single stage cylinder with integrated holding valves and cables. Boom S 38 ft ft ( m) four section full power boom S Two mode boom extension: A ---max mode provides superior capacities by extending the first telescoping section to 63 ft 8 in (19.4m). Standard mode synchronizes all the telescoping sections proportionally to 115 ft (35.0m). Controlled from the operator s cab. S Mechanical boom angle indicator S Maximum tip height for A ---max mode is 73 ft 6 in (22.4m) and standard mode is 123 ft 9 in (37.7m). Boom Head S Four 16.5 in (41.9cm) root diameter nylon sheaves to handle up to eight parts of line S Easilyremovablewireropeguards S Rope dead end lugs on each side of the boom head S Boom head is designed for quick---reeve of the hook block Boom Elevation S One double acting hydraulic cylinder with integral holding valve S Boom elevation: ---3 to 78 Auxiliary Lifting Sheave --- Optional S Single 16.5 in (41.9m) root diameter nylon sheave S Easilyremovablewireropeguards S Does not affect erection of the fly or use of the main head sheaves Hook Blocks and Balls --- Optional S 40 ton (36.3mt) 4 sheave quick---reeve hook block with safety latch S 60 ton (54.4mt) 4 sheave quick---reeve hook block with safety latch S 70 ton (63.5mt) 5 sheave quick---reeve hook block with safety latch S 8.5 ton (7.7mt) swivel and non---swivel hook balls with safety latch Fly --- Optional S 35 ft (10.7m) one piece lattice fly, stowable, offsettable to 2, 15, 30, and45. Maximum tip height is 158 ft (48.2m). S 35 ft---58 ft ( m) two piece bi---fold lattice fly, stowable, offsettable to 2, 15, 30, and45. Maximum tip height is 180 ft 5 in (55.0m). Fly Inserts --- Optional S One 16 ft (4.9m) lattice insert, equipped with two 16.5 in (41.9cm) root diameter nylon sheaves, to be mounted between the boom head and fly options. Maximum tip height is 196 ft (59.7m). S Two 16 ft (4.9m) lattice inserts, one equipped with two 16.5 in (41.9cm) root diameter nylon sheaves, to be mounted between the boom head and fly options. Maximum tip height is 211 ft 7 in (64.5m). J Operator s Cab and Controls Environmental Cab --- Fully enclosed, one person cab of galvaneal steel structure with acoustical insulation Equipped with: S Tinted and tempered glass windows S Extra---large fixed front window with windshield wiper and washer S Swing up roof window with windshield wiper S Sliding left side door with large fixed window S Sliding rear and right side windows for ventilation S Six way adjustable, cushioned seat with seat belt and storage compartment S Engine dependent warm---water heater with air ducts for front windshield defroster and cab floor S Defroster fan for the front window S Bubble level S Circulating fan S Adjustable sun visor S Dome light S Cup holder S Fire extinguisher S Left side viewing mirror S Two position travel swing lock Air Conditioning --- Optional --- Integral with cab heating system utilizing the same ventilation outlets Link-Belt Cranes RTC II

12 (supersedes 5453) J9 Steering Column --- Pedestal type with tilt and telescope functions for operator comfort. Column includes the following controls and indicators: Left and right levers include: S Horn button S Turn signal switch S Driving light switch S Transmission direction switch Panel mounted switches for: S Travel park brake S Steer mode selector S 2/4 wheel drive/range selector S Transmission gear selector S Hazard flasher Panel mounted indicator/warning lights for: S Transmission temperature S Engine oil pressure S Travel park brake S Service brake S Turn signals S Rear wheel offset---optional S Emergency steer --- optional Armrest Controls --- Two dual axis hydraulic joystick controllers or optional single axis hydraulic controllers for: S Swing S Boom hoist S Main rear winch S Auxiliary front winch --- optional S Drum rotation indication S Drum rotation indicator activation switch S Winch high/low speed and disable switch(es) S Third wrap selector switch --- optional S Telescopic override switches S Warning horn button S Swing park brake Outrigger Controls --- Hand held control box with umbilical cord gives the operator the freedom to view operation while setting the outriggers. Foot Controls S Boom telescope S Swing brake S Engine throttle S Service brake Right Front Console --- Controls and indicators for: S Engine ignition S Console dimmer switch S Engine throttle lock S Bubble level S Function disable S 12 volt power connection S Front windshield wiper S Air conditioning --- optional and washer S Boom floodlight --- optional S Cab floodlights S Rotating beacon/strobe S Warning horn S Heating controls light --- optional S Thirdwrapindicator--- optional Cab Instrumentation --- Ergonomically positioned, analog instrumentation for crane operation including: S Engine coolant temperature with warning indicator S Hydraulic oil temperature with warning indicator S Fuel level with warning indicator S Tachometer S Transmission temperature with warning indicator S Voltmeter with warning indicator Rated Capacity Limiter --- Microguard graphic audio --- visual warning system integrated into the dash with anti--- two block and function limiter. Operating data available includes: S Crane configuration S Boom length and angle S Boom head height S Allowed load and % of allowed load S Boom angle S Radius of load S Actual load S Operator settable alarms (include): S Maximum and minimum boom angles S Maximum tip height S Maximum boom length S Swing left/right positions S Operator defined area (imaginary plane) Internal RCL Light Bar --- Optional --- Visually informs the operator when crane is approaching maximum load capacity with a series of green, yellow, and red lights. External RCL Light Bar --- Optional --- Visually informs the ground crew when crane is approaching maximum load capacity with a series of green, yellow, and red lights. J Swing Motor/Planetary --- Bi ---directional hydraulic swing motor mounted to a planetary reducer for 360 continuous smooth swing at 2.0 rpm Swing Park Brake , electric over hydraulic, (spring applied/hydraulic released) multi---disc brake mounted on the speed reducer. Operated by a switch from the operator s cab. Swing Brake , foot operated, hydraulic applied disc brake mounted to the speed reducer Swing Lock --- Two---position swing lock (boom over front or rear) operated from the operator s cab 360 Positive Swing Lock --- Optional --- Meets New York City requirement J Electrical Swing Alarm --- Audio warning device signals when the upper is swinging. Lights S Two working lights on front of the cab S One rotating amber beacon on top of the cab --- optional S One amber strobe beacon on top of the cab --- optional S Boom floodlight --- optional RTC II Link-Belt Cranes

13 5488 (supersedes 5453) J9 3 J Load Hoist System Load Hoist Performance Main (Rear) and Auxiliary (Front) Winches --- 3/4 in (19mm) Rope Maximum Line Pull Normal Line Speed High Line Speed Layer Total Layer lb kg ft/min m/min ft/min m/min ft m ft m 1 17, , , , , Maximum Diameter Wire Rope Application Type Permissible Load in mm lb kg Main (Rear) Standard 3/4 19 6x19 IWRC --- right regular lay (Type DB) 16, Winch Optional 3/ x19 rotation resistant --- right regular lay (Type RB) 12, Auxiliary (Front) Winch Standard 3/4 19 6x19 IWRC --- right regular lay (Type DB) 16, Optional 3/ x19 rotation resistant --- right regular lay (Type RB) 12, M Main and Optional Auxiliary Winches S Axial piston, full and half displacement (2---speed) motors driven through planetary reduction unit for positive control under all load conditions S Grooved lagging S Power up/down mode of operation S Drum rotation indicator(s) S Drum diameter: 13 in (33.0cm) S Rope length: S Front: 500 ft (152.4m) S Rear: 600 ft (182.9m) S Maximumropestorage:657ft(200.3m) S Terminator style socket and wedge S Hoist drum cable followers --- optional Third wrap indicator --- optional --- Visually and audibly warns the operator when the wire rope is on the first/bottom layerandwhenthewireropeisdowntothelastthree wraps J Hydraulic System Counterbalance Valves --- All hoist motors, boom extend cylinders, and boom hoist cylinders are equipped with counterbalance valves to provide load lowering and prevents accidental load drop when hydraulic power is suddenly reduced. J Counterweight Total of 12,000 lb (5 443kg) of counterweight pinned to the upper structure frame with capacities for the 12,000 lb (5 443kg) configuration Link-Belt Cranes RTC II

14 (supersedes 5453) J9 Carrier J General S 10 ft 7 in (3.22m) wide S 14 ft 7 in (4.45m) wheelbase (centerline of first axle to centerline of second axle) Frame --- Box---type, torsion resistant, welded construction made of high tensile steel. Equipped with front and rear towing and tie---down lugs, tow connections, and access ladders. J Outriggers Boxes --- Two double box, front and rear welded to carrier frame Beams and Jacks --- Four single stage beams with Confined Area Lifting Capacities (CALCt) provide selectable outrigger extensions of full, intermediate, and retracted. Hydraulically controlled from the operator s cab with integral check valves. Pontoons --- Four lightweight, quick release, 23.5 x 23.5 in (59.7 x 59.7cm), steel pontoons with contact area of 460 in 2 (2 968cm 2 ) can be stored for road travel in storage racks on the carrier. Main Jack Reaction ,500 lb (41 050kg) forceand 197 psi (1 358kPa) ground bearing pressure J Steering and Axles Steering --- Four independent modes consisting of two wheel front, two wheel rear, four wheel, and crab. Each mode is controlled from the steering wheel and is selected byaswitchintheoperator scab. Drive ---Twomodes:4x2and4x4foroffhighwaytravel Axle Steered, non---driven for 4 x 2 and steered, driven for 4 x 4 Axle Steered, driven J Suspension Front --- Rigid mount to the carrier frame Rear ---Therearaxleissuspendedontheoscillationcylinders with motion of the axle controlled by a four bar linkage system. The oscillation cylinders lockout when the upper structure rotates 2.5 past centerline. S Hydro ---gas rear suspension --- optional J Tires and Wheels Front and Rear --- Four (single) 26.5 x ply rating, earthmover type tires on steel disc wheels S Spare tires and wheels --- optional J Brakes Service --- Full hydraulic, dual circuit, disc type brakes on all wheel ends Parking/Emergency --- Spring applied type, acting on front axle J Electrical Two batteries provide 12 volt starting and operation Lights S Front lighting includes two main headlights and two parking/directional indicators. S Side lighting includes two parking/directional indicators per side. S Rear lighting includes two parking/directional indicators, two parking/brake lights, and two reversing lights. S Other equipment includes hazard/warning system, cab light, instrument panel light, and signal horn. J Engine Specification CAT C6.6 Numbers of Cylinders 6 Cycle 4 Bore and Stroke: inch (mm) 4.13 x 5.00 (105 x 127) Piston Displacement: in 3 (L) 403 (6.6) Max. Brake Horsepower: hp (kw) Peak Torque: ft lb (Nm) 225 2,200 rpm 727 1,400 rpm Alternator: volts --- amps Crankcase Capacity: qt (L) 18.4 (17.4) S Mechanically driven fan and thermostatically controlled radiator J Transmission Powershift --- Three speed with high/low range for 6 forward and 6 reverse gears. Front axle disconnect for two or four wheel drive. Front axle disconnects in high range. RTC II Link-Belt Cranes

15 5488 (supersedes 5453) J9 J Carrier Speeds and Gradeability Spicer Speed Gradeability (@ stall) Gear Ratio mph km/h %Grade 6th Forward & th Reverse th 2WD/Hi rd Forward & nd Reverse st 4WD/Low Based on a gross vehicle weight of 88,000 lb (39 916kg). Crane operating angle must not exceed 35 (77% grade). J Fuel Tank One 75 gallon (283.9L) capacity tank J Hydraulic System All functions are hydraulically powered allowing positive precise control with independent or simultaneous operation of all functions. Main Pumps S One two section fixed displacement gear pump for the front/rear winches and boom hoist circuits. S One two section fixed displacement gear pump for the swing/telescope, power steering/outrigger/telescope, service brake, and oscillation circuits. S Combined pump capacity of 138 gpm (522.4Lpm) Hydraulic Reservoir gal (579.2L) capacity equipped with sight level gauge. Diffusers built in for deaeration. Filtration --- One 10 micron, full flow line filter in the control circuit. All oil is filtered prior to return to reservoir. Accessible for easy filter replacement. J Pump Drive All pumps are mounted on the transmission and mechanically driven by the diesel engine. S Front/rear winches and boom hoist pumps can be disconnected with a manual pump disconnect to aid in cold weather starting --- optional. 5 Link-Belt Cranes RTC II

16 (supersedes 5453) J9 Axle Loads Gross Vehicle Upper Facing Front Upper Facing Rear Base crane with full tank of fuel Weight ( 1 ) Front Axles Rear Axles Front Axles Rear Axles lb kg lb kg lb kg lb kg lb kg 83, , , , , Pintle hook, front Pintle hook, rear Rear steer indicator Hydro---gas suspension Pump disconnect Operator in cab Hoist drum follower --- main Auxiliary winch with 500 ft (152.4m) wirerope Hoist drum follower --- auxiliary Substitute type DB rope with type RB rope --- main winch Substitute type DB rope with type RB rope --- auxiliary winch Substitute 500 ft (152.4m) wire rope with 600 ft (182.9m) auxiliary Remove 600 ft (182.9m) wirerope from rear (main) winch Remove 500 ft (152.4m) wirerope from front (auxiliary) winch Emergency steering mechanical swing lock Air conditioning Floodlight to front of boom base section Fly mounting brackets to boom base section for fly options ft (10.67m) offsettable fly --- stowed 1, , , ft ( m) offsettable fly --- stowed 2, , , , Auxiliary lifting sheave ton (54.4mt) sheave hook block at bumper 1, , , ton (63.5mt) sheave hook block at bumper 1, , , ton (7.7mt) hook ball at bumper ton (54.4mt) sheave hook block at boom head 1, , , , , ton (63.5mt) sheave hook block at boom head 1, , , , , ton (7.7mt) hook ball at boom head Tire Maximum Allowable Axle 25 mph (40.2km/h) 26.5 x 25 (26---PR) 51,040 lb (23 151kg) ( 1 ) Adjust gross vehicle weight and axle loading according to component weight. Note: All weights are ±3%. RTC II Link-Belt Cranes

17 5488 (supersedes 5453) J9 7 General Dimensions CofRotation L 38 0 (11.6m) 7 0 (2.1m) (1.7m) (0.3m) (2.0m) (3.7m) 1 3 (0.4m) 7 8 (2.3m) 12 0 (3.7m) (4.1m) 6 11 (2.1m) 12 0 (3.7m) (4.1m) (0.8m) (13.9m) CofRotation L 10 2 (3.1m) Turning Radius --- Front Wheel (4x2) Steering English Metric Wall to wall over carrier m Wall to wall over boom attachment m Curb to curb m Centerline of tire m Turning Radius --- All Wheel (4x4) Steering English Metric Wall to wall over carrier m Wall to wall over boom attachment m Curb to curb m Centerline of tire m 23 (0.6m) Tail Swing English Metric With counterweight m Without counterweight N/A N/A (0.3m) 9.75 (0.2m) (2.5m) (2.9m) (3.2m) (5.4m) 24 0 (7.3m) Not To Scale Link-Belt Cranes RTC II

18 (supersedes 5453) J9 Working Range Diagram Height In Feet (Meters) Above Ground 220 (67.1) 210 (64.0) 200 (61.0) (3.0m) (57.9) 180 (54.9) 170 (51.8) 160 (48.8) 150 (45.7) 140 (42.7) 130 (39.6) 120 (36.6) 110 (33.5) 100 (30.5) 90 (27.4) 80 (24.4) 70 (21.3) 60 (18.3) 50 (15.2) 40 (12.2) 30 (9.1) 20 (6.1) 10 (3.0) (64.0) 8.5 (2.6m) 190 (57.9) 170 (51.8) 150 (45.7) 130 (39.6) 110 (33.5) 45 OFFSET 30 OFFSET 15 OFFSET 2 OFFSET (27.4) (21.3) (15.2) (9.1) (3.0) 115 (35.1m) + 90 (27.4m) 115 (35.1m) + 74 (22.6m) 115 (35.1m) + 58 (17.7m) 95 (29.0m) + 58 (17.7m) 115 (35.1m) + 35 (10.7m) 115 (35.1m) + 16 (4.9m) 95 (29.0m) + 35 (10.7m) 115 (35.1m) Mode B 105 (32.0m) 95 (29.0m) 85 (25.9m) 75 (22.9m) 65 (19.8m) 63.6 (19.4m) Mode A 55 (16.8m) 45 (13.7m) 38 (11.6m) Mode A & B 78 Max Boom Angle Boom + Fly Length In Feet (Meters) Boom Length In Feet (Meters) 200 (61.0) 180 (54.9) (48.8) (42.7) (36.6) (30.5) (24.4) (18.3) (12.2) Operating Radius From Axis Of Rotation In Feet (Meters) 20 (6.1) CofRotation L RTC II Link-Belt Cranes

19 5488 (supersedes 5453) J9 9 Boom Extend Modes Boom Mode A (A -max) Only inner mid section telescopes. Boom Length 38 (11.58m) 45 (13.72m) 55 (16.76m) Inner Mid Section 308 (7.82m) Stroke Base Section 63.6 (19.39m) Boom Mode B (Standard) Inner mid, outer mid, and tip sections telescope simultaneously. Boom Length 38 (11.58m) 45 (13.72m) 55 (16.76m) 65 (19.81m) 75 (22.86m) 85 (25.91m) 95 (28.96m) 105 (32.00m) Tip Section 308 (7.82m) Stroke Outer Mid Section 308 (7.82m) Stroke Inner Mid Section 308 (7.82m) Stroke Base Section 115 (35.05m) Link-Belt Cranes RTC II

20 (supersedes 5453) J9 Main Boom Lift Capacity Charts -- Standard Radius (ft) Fully Extended Outriggers Rotation (All Capacities Are Listed In Pounds) Boom Length (ft) / , , , , , ,600 98,100 71,900** ,600 91,200 86,200 71,900** 54, ,100 66,800 66,400 66,100** 54,000 55,900 46, ,000 52,600 53,000 53,000 53,700 49,900 41,800 36,200 28, ,800 42,500 43,000 43,400 43,600 43,800 37,800 34,200 28, ,300 33,900 34,200 34,400 34,600 34,000 30,700 28, ,400 26,700 26,900 27,100 27,200 27,300 25, ,200 21,600 21,800 22,000 22,100 22,100 22, ,700 18,000 18,100 18,200 18,300 18, ,800 15,000 15,100 15,200 15,300 15, ,700 12,800 12,900 13,000 13, ,800 11,000 11,100 11,200 11, ,400 9,500 9,600 9, ,100 8,200 8,300 8, ,100 7,100 7, ,100 6,200 6, ,300 5, ,600 4, , , ** 63.6 A---max Mode Radius (ft) This information is not for crane operation. Operator must refer to the in--- cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads. RTC II Link-Belt Cranes

21 5488 (supersedes 5453) J9 11 Radius (ft) On Tires -- Stationary -- Boom Centered Over Front Between Tire Tracks (All Capacities Are Listed In Pounds) Boom Length (ft) , ,800 56, ,500 48,900 39, ,400 39,100 39,500 30, ,000 29,700 30,100 30,400 22, ,600 21,400 21,900 22,200 22,400 17, ,000 16,600 16,900 17,100 17, ,900 13,300 13,400 13, ,200 10,600 10,800 11, ,500 8,800 8, ,800 7,100 7, ,700 5, ,600 4, , , Radius (ft) This information is not for crane operation. Operator must refer to the in--- cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads. Link-Belt Cranes RTC II

22 (supersedes 5453) J9 Radius (ft) On Tires -- Pick & Carry (Creep) -- Boom Centered Over Front (All Capacities Are Listed In Pounds) Boom Length (ft) , ,200 54, ,300 46,700 39, ,700 36,100 36,600 30, ,300 28,800 29,300 29,600 22, ,600 21,400 21,900 22,200 22,400 17, ,000 16,600 16,900 17,100 17, ,900 13,300 13,400 13, ,200 10,600 10,800 11, ,500 8,800 8, ,800 7,100 7, ,700 5, ,600 4, , , Radius (ft) On Tires -- Stationary Rotation (All Capacities Are Listed In Pounds) Boom Length (ft) , ,000 39, ,800 27,400 27, ,200 16,800 17,300 17, ,500 11,100 11,700 12,000 12, ,800 7,500 8,100 8,400 8,600 8, ,000 5,600 5,900 6,200 6, ,800 4,100 4,400 4, ,400 2,800 3,000 3, ,700 1,900 2, ,100 1, Radius (ft) Radius (ft) This information is not for crane operation. Operator must refer to the in--- cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads. RTC II Link-Belt Cranes

23 5488 (supersedes 5453) J9 13 Fly Attachment Lift Capacity Charts -- Optional Radius (ft) 115 ft Main Boom Length 2 Fly Offset Fly Length (ft) Fully Extended Outriggers Rotation (All Capacities Are Listed In Pounds) 115 ft Main Boom Length 15 Fly Offset Fly Length (ft) Radius (ft) , , ,100 8, , ,900 8,700 7, , ,600 8,400 7,200 5, , ,300 8,200 7,200 5, ,000 7, ,000 8,000 7,000 5, ,700 6,900 5, ,600 7,700 6,500 5, ,400 6,700 5,600 4, ,200 7,500 6,100 4, ,800 6,500 5,300 4, ,000 7,200 5,800 4, ,600 6,300 5,000 3, ,000 7,000 5,400 4, ,500 6,100 4,700 3, ,200 6,700 5,100 3, ,600 5,900 4,500 3, ,400 5,900 4,900 3, ,800 5,700 4,300 3, ,700 5,200 4,600 3, ,100 5,600 4,100 3, ,100 4,600 4,400 3, ,400 5,200 3,900 2, ,600 4,100 4,000 2, ,900 4,600 3,700 2, ,100 3,600 3,500 2, ,300 4,000 3,500 2, ,600 3,100 3,000 2, ,900 3,500 3,400 2, ,200 2,700 2,600 2, ,400 3,100 3,000 2, ,900 2,300 2,200 2, ,000 2,700 2,600 2, ,500 2,000 1,900 1, ,600 2,300 2,200 2, ,200 1,600 1,500 1, ,300 1,900 1,800 1, ,400 1,200 1, ,600 1,500 1, ,100 1, ,300 1,200 1, , This information is not for crane operation. Operator must refer to the in--- cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads. Link-Belt Cranes RTC II

24 (supersedes 5453) J9 Radius (ft) 115 ft Main Boom Length 30 Fly Offset Fly Length (ft) Fully Extended Outriggers Rotation (All Capacities Are Listed In Pounds) 115 ft Main Boom Length 45 Fly Offset Fly Length (ft) Radius (ft) , , , , , , , ,200 5, , ,100 5,500 4, , ,000 5,300 4,000 3, ,400 4, ,000 5,200 3,800 3, ,300 4,800 3, ,200 5,100 3,700 2, ,400 4,700 3,300 2, ,400 5,000 3,500 2, ,600 4,700 3,200 2, ,700 4,900 3,400 2, ,900 4,700 3,100 2, ,100 4,900 3,200 2, ,200 4,600 3,000 2, ,500 4,500 3,100 2, ,600 4,600 2,900 2, ,000 3,900 3,000 2, ,200 2,800 2, ,500 3,400 2,900 2, ,700 2,700 1, ,100 3,000 2,800 1, ,200 2,700 1, ,500 2,500 1, ,700 2,600 1, ,200 2,200 1, ,200 2,300 1, ,800 1,800 1, ,900 1, ,400 1,400 1, ,600 1, ,100 1,100 1, , ,000 This information is not for crane operation. Operator must refer to the in--- cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads. RTC II Link-Belt Cranes

25 5488 (supersedes 5453) J9 15 Main Boom Lift Capacity Charts -- Metric Radius (m) Fully Extended Outriggers Rotation (All Capacities Are Listed In Kilograms) Boom Length (m) / ** ** ** ** ** ** ** A---max Mode Radius (m) This information is not for crane operation. Operator must refer to the in--- cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 75% of the tipping loads and on tires do not exceed 65% of the tipping loads. Link-Belt Cranes RTC II

26 (supersedes 5453) J9 Radius (m) On Tires -- Stationary -- Boom Centered Over Front Between Tire Tracks (All Capacities Are Listed In Kilograms) Boom Length (m) Radius (m) This information is not for crane operation. Operator must refer to the in--- cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 75% of the tipping loads and on tires do not exceed 65% of the tipping loads. RTC II Link-Belt Cranes

27 5488 (supersedes 5453) J9 17 Radius (m) On Tires -- Pick & Carry (Creep) -- Boom Centered Over Front (All Capacities Are Listed In Kilograms) Boom Length (m) Radius (m) On Tires -- Stationary Rotation (All Capacities Are Listed In Kilograms) Boom Length (m) Radius (m) Radius (m) This information is not for crane operation. Operator must refer to the in--- cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 75% of the tipping loads and on tires do not exceed 65% of the tipping loads. Link-Belt Cranes RTC II

28 (supersedes 5453) J9 Fly Attachment Lift Capacity Charts -- Optional Radius (m) m Main Boom Length 2 Fly Offset Fly Length (m) Fully Extended Outriggers Rotation (All Capacities Are Listed In Kilograms) m Main Boom Length 15 Fly Offset Fly Length (m) Radius (m) This information is not for crane operation. Operator must refer to the in--- cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 75% of the tipping loads and on tires do not exceed 65% of the tipping loads. RTC II Link-Belt Cranes

29 5488 (supersedes 5453) J9 19 Radius (m) m Main Boom Length 30 Fly Offset Fly Length (m) Fully Extended Outriggers Rotation (All Capacities Are Listed In Kilograms) m Main Boom Length 45 Fly Offset Fly Length (m) Radius (m) This information is not for crane operation. Operator must refer to the in--- cab information for crane operation. Rated lifting capacities shown on fully extended outriggers do not exceed 75% of the tipping loads and on tires do not exceed 65% of the tipping loads. Link-Belt Cranes RTC II

30 5488 (supersedes 5453) J9 Link -Belt Construction Equipment Company Lexington, Kentucky RLink--Belt is a registered trademark. Copyright We are constantly improving our products and therefore reserve the right to change designs and specifications. RTC II Link-Belt Cranes

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56