Meter, PD Series, K12-S1, S3, S5, S6 and S7
|
|
- Kerry Casey
- 5 years ago
- Views:
Transcription
1 PARTS LIST Meter, PD Series, K12-S1, S3, S5, S6 and S7 Bulletin PO01018 Issue/Rev. 0.4 (3/18) S1, S3, S5 S6, S7
2 Item Description Qty. K12-S1 K12-S5 K12-S7 2 Bulletin PO01018 Issue/Rev. 0.4 (3/18)
3 Item Description Qty. K12-S1 K12-S5 K12-S7 1 Adapter, Calibrator Adjusting Stem Adapter: Standard and ATC Slotted (For Use with Packing Gland Lubrication Kit) ATG Blank, Snap-In Bolt, Eye Calibrator: Manual Temperature Condensated, Standard Temperature Condensated, Special Temperature of API Gravity xxx xxx xxx Dummy Calibrator Clamp, Oil Tube Coupling, Calibrator Drive: Standard, Used on 3/16" Shaft Used on Transmitters with 1/4" Shaft Pin Coupling, Drive Cover: S All Others Vent: 11 Vent Housing Pipe Plug, 2" NPT Pipe Plug, 1/2" NPT Screw Washer O-Ring Spacer Fitting Adapter Elbow /8" Tubing Cover Knob Flange, Temperature Well Gasket, Cover Plate Gasket, Packing Gland Gasket, Temperature Well @2 Gland, Packing: Standard PTFE NACE Housing Assembly: S1, S3, S6 Standard... 1 C/F S5, S S3, S6 (with Flanged Drain) NACE Cap, Pipe: Standard NACE Nipple, Pipe: S All Others, Standard S3 Only, NACE Plug, Pipe, 1/2" NPT: Standard S3 and S6 NACE Polytetrafluoroethylene (PTFE). Bulletin PO01018 Issue/Rev. 0.4 (3/18) 3
4 Item Description Qty. K12-S1 K12-S5 K12-S7 32 Lubrication Assembly Nut, Housing to Cover: S7, 1-1/2" S6, 1-1/4" All Others, 1" O-Ring, Cover: Buna-N Viton O-Ring, Packing Gland: Buna-N Viton Oiler Pin, Groove, 5/64 x 1/2" Pin, Locating Dowel Plate, Caution Plate, Cover * Plate, Lubrication Plug, Pipe, 1/2" NPT: Standard NACE: S S Plug, Pipe, 1" NPT: Standard NACE: S S Plug, Temperature Well Screw: S1, S3, S5, 5/16-18 x 7/8" S6 and S7, 5/16-18 x 3/4" Screw, Drive, #2 x 1/8" Screw, #10-24 x 3/4" Screw, Adapter to Cover Screw, Base Plate. #10-32 x 7/8" Screw, Calibrator Mounting Screw, Cover Plate, #10-32 x 3/8" Screw, Nozzle to Innermech: R Standard 7/8-9 x 3-1/2"... 4 P P P NACE: R S3 Only 7/8-9 x 3-1/2" P R S6 Only 7/8-9 x 4" P Screw, Packing Gland: 5/16-18 x 1-1/4" /16-14 x 1-1/2" Seal, Lead, and Wire Shaft Assembly, Calibrator Drive: S All Others Coupling, Lower Drive: S All Others Coupling, Upper Drive Pin, Groove, 5/64 x 1/2": S All Others Bulletin PO01018 Issue/Rev. 0.4 (3/18)
5 Item Description Qty. K12-S1 K12-S5 K12-S7 59 Shaft: S All Others Stem Assembly, Adjusting Ball Plate, Base Plate, Retainer Spring, Knob Stem, Adjusting Stud: S1, S3, S S S Tube. Oil Washer, Lock Spring Washer, Nozzle to Innermech Inner Mechanism Item Description Qty. Part Number 70 Base Block: Standard High Viscosity for 1,000 SSU to 3,000 SSU High Viscosity for 3,000 SSU to 5,000 SSU High Viscosity for 5,000 SSU to 10,000 SSU Body Bolt, Eye Cap, Adjusting Screw Shaft, Drive Gear Cone, Shaft Cover Cover, Rotor Shaft Dowel, Cover, and Base Elbow, Pitot Fitting Fitting, Pitot Gear, Calibrator Drive: Hectoliters, Standard Barrels, Standard Bushing: Standard Pin Gear, Idler: Hectoliters, Standard Barrels, Standard Barrels, LPG Gear, Jackshaft Gear, Jackshaft Pinion: Standard LPG Key, Rotor Shaft Nut, Rotor Shaft, 1-3/4"-8, UN-3B Pin, Cotter, 1/8 x 3/4" Pin, Groove, 1/8 x 3/4" Plate, Thrust Bearing Bulletin PO01018 Issue/Rev. 0.4 (3/18) 5
6 Item Item Description Description Qty. K12-S1 K12-S5 Qty. Part K12-S7 Number 93 + Retainer, Thrust Bearing Rotor Assembly, Standard Bar, Adjusting Bearing, Rotor: Standard and All Iron LPG Bearing, Thrust Blade Assembly, Upper: Standard Modified for 1,000 SSU to 3,000 SSU Modified for 3,000 SSU to 5,000 SSU Modified for 5,000 SSU to 10,000 SSU Modified for 200 F Modified for 1,000 SSU to 3,000 SSU and 200 F Modified for 3,000 SSU to 5,000 SSU and 200 F Modified for 5,000 SSU to 10,000 SSU and 200 F Blade Assembly, Lower: Standard Modified for 1,000 SSU to 3,000 SSU Modified for 3,000 SSU to 5,000 SSU Modified for 5,000 SSU to 10,000 SSU Modified for 200 F Modified for 1,000 SSU to 3,000 SSU and 200 F Modified for 3,000 SSU to 5,000 SSU and 200 F Modified for 5,000 SSU to 10,000 SSU and 200 F Bearing Bushing Pin, Blade Bearing Bushing Pin, Cotter, 1/8 x 2" Pin, Cotter, 1/8 x 2-1/2" Plug, Center Plug, End Screw, Cap, 1/4-28 x 1-1/2" Sleeve, Expansion Spacer Blade Assembly, Middle: Standard Modified for 1,000 SSU to 3,000 SSU Modified for 3,000 SSU to 5,000 SSU Modified for 5,000 SSU to 10,000 SSU Modified for 200 F Modified for 1,000 SSU to 3,000 SSU and 200 F Modified for 3,000 SSU to 5,000 SSU and 200 F Modified for 5,000 SSU to 10,000 SSU and 200 F Bearing Bolt Bushing Nut, Hex Pin, Blade Bearing Bushing Pin, Cotter, 3/32 x 1" Pin, Dowel Plug, Center Plug, End Retainer, Dowel Screw, Cap, 1/4-28 x 1-1/2" Sleeve, Expansion Spacer Bulletin PO01018 Issue/Rev. 0.4 (3/18)
7 Item Description Description Qty. K12-S1 K12-S5 Qty. Part K12-S7 Number Cam and Shaft Assembly Cam Key Shaft Collar Lock, Rotor Bearing Nut, Adjusting Screw Pin, Roll, 5/32 x 1" Pin, Rotor Cover Roller Plate, Rotor Cover Roller Pin Plate, Lock Plate, Rotor Gear Gear, Rotor Pin, Lock Sleeve, Upper Rotor Bearing (Not sold as a separate component - included with item 140) Roller, Rotor Cover: Standard and All Iron Rotor, Sub Assembly: Standard Modified for 1,000 SSU to 3,000 SSU Modified for 3,000 SSU to 5,000 SSU Modified for 5,000 SSU to 10,000 SSU Modified for 200 F Modified for 1,000 SSU to 3,000 SSU and 200 F Modified for 3,000 SSU to 5,000 SSU and 200 F Modified for 5,000 SSU to 10,000 SSU and 200 F Dowel Screw, 5/8-11 X 2-1/4", Drilled Sleeve, Lower Rotor Bearing (Not sold as a separate component - included with item 140) Washer Screw, 5/16-18 x 5/8", Drilled Screw, #10-32 x 3/8" Screw, Adjusting Screw, Pin Clamp, 3/8-16 x 1-1/4", Drilled Screw, Rotor Gear Plate 1/2-13 x 1-3/4", Drilled Spacer, Lower Rotor Bearing Spacer, Upper Rotor Bearing Washer, Flat Washer, Flat Screw, 3/8-16 x 1-1/4" Screw, 5/16-18 x 7/8" Screw, Body to Block, 5/8-11 x 2-1/4" Screw, Cover, and Base, 5/8-11 x 2-1/4" Screw, Rotor Shaft, 3/4-10 x 2-1/4" Screw, Set, 1/4-20 x 1/4" Shaft, Pinion with Spacer Sleeve Assembly: Standard LPG Bushing: Standard LPG Bushing, Flanged: Standard LPG Washer, Flat Washer, Flat Rotor Lifting Lug... # Bulletin PO01018 Issue/Rev. 0.4 (3/18) 7
8 Inner Mechanism General Assembly Numbers Barrel Geared, Standard Barrel Geared, All Iron Trim Barrel Geared, LPG Trim Hectoliter Geared, Standard Hectoliter Geared, All Iron Trim Hectoliter Geared, LPG Trim * Not illustrated. + Recommended stock. R Indicates change since last revision. # As Note 1: When ordering, include product temperature range, specific or API gravity, API table used, and meter and gearing the calibrator is to be used in conjunction Note 2: See Form No. PO01042 for component Note 3: Only standard gearing is listed. For additional gearing combinations, see Gear Train Bulletin AB The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect. Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect. Contact information is subject to change. For the most current contact information, visit our website at TechnipFMC.com and click on the Contact Us link. TechnipFMC.com TechnipFMC 2018 All rights reserved. PO01018 Issue/Rev. 0.4 (3/18) TechnipFMC FMC Technologies Measurement Solutions, Inc. 500 North Sam Houston Parkway West, Suite 100 Houston, Texas USA P: USA Operation 1602 Wagner Avenue Erie, Pennsylvania USA P: Germany Operation Smith Meter GmbH Regentstrasse Ellerbek, Germany P:
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7 Parts List Bulletin PO01018 Issue/Rev 0.1 (7/13) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 Page 2 SS01018 Issue/Rev.
More informationSmith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List
Issue/Rev. 0.0 (1/14) Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List Bulletin PO01023 *For meters which began shipping in 1993 to current. For meters shipped prior to
More informationForm No. P Meter, PD Model SD, ASD, SF, or ASF-4, 4R, 4V, or 4RV-NF Parts List
Form No. P0541.03 Meter, PD Model SD, ASD, SF, or ASF-4, 4R, 4V, or 4RV-NF Parts List Issue/Rev. 0.3 (3/01) Bulletin P0541.03 SD and ASD Models The Most Trusted Name In Measurement SD or ASD SF or ASF
More informationTransmitter, Model UPT
PARTS LIST Transmitter, Model UPT Bulletin PO01056 Issue/Rev. 0.0 (6/17) Universal Pulse Transmitter 554665-0-1X Single Shaft Design Item Description Qty. Part Number 1 Bearing, Sleeve... 2 642228-450
More information3" Steel Model E3. We put you first. And keep you ahead.
SPECIFICATIONS MEASUREMENT SOLUTIONS 3" Model E3 Bulletin SS01016 Issue/Rev. 1.1 (2/15) We put you first. And keep you ahead. SMITH METER PD METERS The Smith Meter Model E3 is a 3", double-case, straightthrough
More information6" Steel Model G6. Smith Meter Rotary Vane PD Meters. Features. Operating Specifications Maximum Flow Rate. Options
SPECIFICATIONS 6" Steel Model G6 Bulletin SS01014 Issue/Rev. 1.0 (4/18) Smith Meter Rotary Vane PD Meters The Smith Meter Model G6 Meter is a 6", double-case, straight-through rotary vane type positive
More informationSmith Meter PD Meters 3" Steel Model E3
Smith Meter PD Meters 3" Steel Model E3 Specifications Bulletin SS01016 Issue/Rev 1.0 (8/13) The Smith Meter Model E3 is a 3", double-case, straight-through (S1 through S7) or angle-type (A1 and A3), rotary
More informationSmith Meter AccuLoad IV-QT Hardware Worksheet
APPLICATION BULLETIN Smith Meter AccuLoad IV-QT Hardware Worksheet Bulletin AB06213 Issue/Rev. 0.0 (4/17) This worksheet is being provided to ensure that the AccuLoad IV-QT hardware contains enough I/O
More informationTransmitter, Model UPT
Form No. P0907.05 Transmitter, Model UPT Parts List Issue/Rev. 0.5 (5/11) Bulletin P0907.05 Universal Pulse Transmitter 554665-0-1X Single Shaft Design The Most Trusted Name In Measurement Universal Pulse
More informationTools, Mechanical. All or Multiple Products. Parts List. Feeler Gauges. Spiders and Bushings. Feeler Gauge Extension Rod. Cam Setting Bushing
Issue/Rev. 0.1 (9/12) All or Multiple Products Tools, Mechanical Parts List Bulletin PO0A001 Spiders and Bushings Feeler Gauges Locates rotor assembly while obtaining blade tip and block clearances on
More informationMicro Valve. Quick, Sure Response with Design Adaptability. Features and Benefits. Applications. Dependable Performance SPECIFICATIONS / PARTS LIST
SPECIFICATIONS / PARTS LIST Micro Valve Bulletin SSIN064 Issue/Rev. 0.0 (2/18) Since its introduction in 1956, Micro Valve has provided successful service through thousands of applications. This makes
More informationFlow Conditioners. We put you first. And keep you ahead. FEATURES OPTIONS. Bulletin SS02007 Issue/Rev. 0.9 (10/14)
SPECIFICATIONS MEASUREMENT SOLUTIONS Flow Conditioners Bulletin SS02007 Issue/Rev. 0.9 (10/14) We put you first. And keep you ahead. Smith Meter TURBINE METERS Smith Meter Flow Conditioners optimize turbine
More informationMV Series. Smith Meter Turbine Meters. Features. Operating Specifications SPECIFICATIONS. Bulletin SS02016 Issue/Rev. 2.0 (2/18)
SPECIFICATIONS MV Series Bulletin SS02016 Issue/Rev. 2.0 (2/18) Smith Meter Turbine Meters The Smith Meter MV Series Turbine Meter is intended for the measurement of crude oils and other products having
More informationSmith Meter Rotary Vane PD Meters Single and Double Case PD Meters Installation / Operation / Maintenance Manual
MANUAL Smith Meter Rotary Vane PD Meters Single and Double Case PD Meters Installation / Operation / Maintenance Manual Bulletin MN01011 Issue/Rev 1.0 (6/17) Models Singles-Case Meters SC-13, 13DI SD-30,
More informationGenesis Series 2" and 3" Steel Meters
SPECIFICATIONS Genesis Series 2" and 3" Steel Meters Bulletin SS01060 Issue/Rev. 1.0 (2/17) SMITH METER PD METERS TechnipFMC Smith Meter Genesis Series 2" and 3" PD meter is a single case, positive displacement,
More informationIssue/Rev. 0.3 (2/04) Bulletin P
Form No. P0906.03 E-Type Transmitter Parts List Issue/Rev. 0.3 (2/04) Bulletin P0906.03 (Previous Design) Switch and Network Assembly The Switch and Network Assembly is no longer available. To replace
More informationMV Series. We put you first. And keep you ahead. SMITH METER TURBINE METERS FEATURES OPERATING SPECIFICATIONS. Bulletin SS02016 Issue/Rev. 1.
SPECIFICATIONS MEASUREMENT SOLUTIONS MV Series Bulletin SS02016 Issue/Rev. 1.7 (9/14) We put you first. And keep you ahead. SMITH METER TURBINE METERS The Smith Meter MV Series Turbine Meter is intended
More informationModel DE-3 Air Release Heads Parts List
Issue/Rev. 0.0 (1/14) Smith Meter Air Eliminator Model DE-3 Air Release Heads Parts List Bulletin MN03021 Contents Section 1 Introduction... Page 2 Principle of Operation... Page 2 Section 2 Installation...
More informationCounters, Printers, Preset Counters
SPECIFICATIONS Counters, Printers, Preset Counters Bulletin SS01100 Issue/Rev. 0.3 (10/17) Smith Meter PD Meter Accessories High Capacity and Large Numeral Counters Model 600 and 900 Series Non-Reset CountersModel
More informationModel G6-S3. Repeatability ±0.02%
Issue/Rev. 0.6 (2/07) Smith Meter TM PD Rotary Vane Meter 6" Steel Model G6 Specifications Bulletin SS01014 The Smith Meter TM Model G6 Meter is a 6", double-case, straight-through (S3 through S8) or angle-type
More informationSmith Meter Truck Meter Packages Specifications
Issue/Rev. 0.4 (8/12) P Meter Smith Meter Truck Meter Packages Specifications ulletin SS01095 TP (Ticket Printer) LN (Large Numeral ounter) Preset ounter Air Eliminator/ Strainer Faucet P Meter Smith Meter
More informationOrificeMaster Specifications
Issue/Rev. 0.2 (10/06) Single Chamber Orifice Fittings OrificeMaster Specifications Bulletin SSOR005 FMC Technologies Measurement Solutions Orifice- Master Single Chamber Orifice Fitting is manufactured
More informationSmith PD Rotary Vane Meters F4 PRIME Cover Field Retrofit Procedure Service Bulletin
Smith PD Rotary Vane Meters F4 PRIME Cover Field Retrofit Procedure Service Bulletin Issue/Rev. 0.1 (11/02) Bulletin SV01009 Tools and Parts Required P/N 554583-001, Parts kit for F4 PRIME retrofit P/N
More informationPRIME 4 Service. Smith Meter Rotary Vane Meters. Contents
Smith Meter Rotary Vane Meters PRIME 4 Service Issue/Rev. 0.4 (7/11) Bulletin MN01041 Contents Trouble Shooting... Page 2 Genuine Smith Meter Parts... Page 2 Special Tools and Fixtures... Page 2 Disassembly
More informationO-540-A4B5 PARTS CATALOG WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES
INTRODUCTION This illustrated parts catalog contains a complete parts listing for the Lycoming O-540-A4B5 wide cylinder flange crankcase model aircraft engines. Major assembly and sub-assembly parts of
More informationNon Ferrous Aircraft Fueling Meters
Issue/Rev. 0.3 (6/02) Smith Meter TM PD Rotary Vane Meter Non Ferrous ircraft Fueling Meters Specifications Bulletin SS01009 The Smith Meter TM ircraft Refueling Meters are non ferrous, single case, rotary
More informationDensitometers L-Dens 427F Ex Density Sensor Specifications
Issue/Rev. 0.1 (2/12) Densitometers L-Dens 427F Ex Density Sensor Specifications Bulletin SS04001E The L-Dens 427F Ex Density Sensor combines an accuracy of 1 x 10-4 g/cm 3 in a compact design. Continuous
More informationO-540-F1B5 SERIES PARTS CATALOG WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES
INTRODUCTION This illustrated parts catalog contains a complete parts listing for the Lycoming O-540-F1B5 series wide cylinder flange crankcase model aircraft engines. Major assembly and sub-assembly parts
More informationDI PUMP PARTS PRICE LIST
ITEM 1 2 2A PUMP 5040 Pump Body, 1-1/2" NPT Mech. Seal 1 40058 1 5040 Pump Body, 1-1/2" NPT, Packing 1 40057 1 5040 Pump Body, 1-1/2" 150# Flg., Mech. Seal 1 40787 1 5040 Pump Body, 1-1/2" 150# Flg., Packing
More informationFKL (25, 75, 150, 205, 250 & 400) Exploded View
3 FKL (5, 75, 50, 05, 50 & 400) Exploded View 3 4 5 6 7 8 9a0 a 3 4 5 6 7 34 35 8 9 0 40 4 4 43 36 37 38 39 44 45 46 65000005 Rev A 4 5 6 Fristam FKL Series Pumps 33 3 7 8 48 47 3 49 9 30 3 b 3 49 33 50
More informationINSTRUCTION MANUAL AND PARTS LIST FOR A3D SERIES PUMPS
TM INSTRUCTION MANUAL AND PARTS LIST FOR A3D SERIES PUMPS WARNING This Instruction Manual and General Instructions Manual SRM00046, should be read thoroughly prior to pump installation, operation or maintenance.
More informationSTEERABLE CAM LOBE MOTOR FIXED-MOUNT CAM LOBE MOTOR (SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE)
A2 CAM LOBE MOTORS RE030747 -UN-13JUL99 STEERABLE CAM LOBE MOTOR RE030748 -UN-13JUL99 FIXED-MOUNT CAM LOBE MOTOR (SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE) CAM LOBE MOTORS PC2027 (21-JUL-99)
More informationPneumatic Circular Saw. Type Illustration can differ from the original. Spare Parts List
Pneumatic Circular Saw Type Illustration can differ from the original Cleaning Regular cleaning is required for a continuous and proper operation. Clean the housing regularly with a soft cloth, it is important
More informationPRODUCT SERVICE MANUAL FOR BK12DHZ PUMPS
PRODUCT SERVICE MANUAL FOR BK12DHZ PUMPS WARNING This manual, and the GENERAL INSTRUCTION MANUAL SRM00046, should be read thoroughly prior to pump installation, operation or maintenance. Manual No. SRM00095
More informationSerial Number Range. Jib-Hoist. from SN Part No
Serial Number Range Jib-Hoist from SN 56306 Part No. 645045 Rev B May 2010 2 Jib-Hoist Part No. 645045 How to Read Your Serial Number Part No. 645045 Jib-Hoist 3 Table of Contents This manual is updated
More informationLycoming AIRCRAFT ENGINES. IO-540-AC1A5 Wide Series Flange Crankcase Model Engine PARTS CATALOG PC
AIRCRAFT ENGINES IO-540-ACA5 Wide Series Flange Crankcase Model Engine PARTS CATALOG PC-5- November 008 Lycoming 5 Oliver Street Williamsport, PA 770 U.S.A. 570/33-8 IO-540-ACA5 PARTS CATALOG This illustrated
More informationParts List PL_TR-TO-10_0714
Torque Transfer Solutions TR-TO-10 Series 10-Speed Twin Counter Shaft Manual Transmission Parts List PL_TR-TO-10_0714 14700 Helm Ct. Plymouth, MI 48170 U.S.A. (800) 401-9866 www.tremec.com Copyright 2014
More informationAppendix D Outline Dimensions
Appendix D Outline Dimensions Model D81 Bare with Flywheel Suction valve unloaders (optional) 5-1/2" (13.) 5-1/2" (13.) 1/4" NPT drain Inlet 2" Weld flange Inlet pressure guage Outlet pressure gauge Outlet
More informationRemanufactured Transmissions, Spare Parts, and Kits Catalog
S6-650 Spare Parts - Gearbox Housing Group 01.010 1319 301 025 Main Housing without Check Valve 005/006/045/046/049/050 1319 301 093 Main Housing without Check Valve 083/085/084/086 1319 301 084 Main Housing
More informationPD Rotary Vane Meters Double Case/3 Bladed
По вопросам продаж и поддержки обращайтесь: Тел./факс: +7(843)206-01-48 (факс доб.0) fc@nt-rt.ru www.fmc.nt-rt.ru Issue/Rev. 0.2 (6/03) Model Number Smith Meter PD Rotary Vane Meters PD Rotary Vane Meters
More informationDIAMO Discovery XLT PARTS CATALOG Engine First Edition August 2008
DIAMO Discovery XLT PARTS CATALOG - 500 Engine First Edition August 2008 Copyright 2007-2008 LS MotorSports, LLC. Reproduction without written permission is completely forbidden. The information and diagrams
More informationProduct Service Manual For DLH12DHT SERIES PUMPS
Product Service Manual For DLH12DHT SERIES PUMPS Pump Size Bill of Material Assembly Drawing 275 3217 / 568 - DLH12DHTX-275 Figure 3 312 3220 / 561 - DLH12DHT 312 Figure 3 3220 / 567 - DLH12DHT - 312 P
More informationAir Powered Man Rider Winch
Product s Information Air Powered Man Rider Winch TM MR150K Series (Dwg. MHP3377) Save These Instructions R Form MHD589 Edition B May 2016 45957107 2016 Ingersoll Rand Only allow Ingersoll Rand trained
More informationINSTRUCTION MANUAL AND PARTS LIST FOR PG/RG3D_-187, 218, 250 and 312 SERIES PUMPS
INSTRUCTION MANUAL AND PARTS LIST FOR PG/RG3D_-187, 218, 250 and 312 SERIES PUMPS WARNING This Instruction Manual and General Instructions Manual, CA-1, should be read thoroughly prior to pump installation,
More informationCarrier Transicold Diesel Engine CT4-91-TV (V1505) Service Parts List Rev A
Carrier Transicold Diesel Engine CT--TV (V0) Service Parts List -0 Rev A Service Parts List DIESEL ENGINE CT--TV (V0) CONTENTS INTRODUCTION... REPLACEMENT ENGINE PART NO.... ORDERING INSTRUCTIONS... GENERAL
More informationElectronic Preset Delivery System Smith Meter AccuLoad III. Vapor Recovery. Vapor Recovery System. Overview
Electronic Preset Delivery System Smith Meter AccuLoad III Vapor Recovery Issue/Rev. 0.0 (5/11) Bulletin AB06073 Vapor Recovery System In AccuLoad III.net firmware revision 11.16, a new feature was implemented
More informationPRODUCT SERVICE MANUAL. BK6DHZ(C)-250, 275, 312 and 400 PUMPS
PRODUCT SERVICE MANUAL BK6DHZ(C)-250, 275, 312 and 400 PUMPS WARNING This manual, and the GENERAL INSTRUCTION MANUAL, SRM00046, should be read thoroughly prior to pump installation, operation or maintenance.
More informationPARTS MANUAL SUPPORTED BY HUSTLER TURF EQUIPMENT AND EXCEL INDUSTRIES, INC.
SHIBAURA DIESEL ENGINE MODEL: N843 and N843L PARTS MANUAL SUPPORTED BY HUSTLER TURF EQUIPMENT AND EXCEL INDUSTRIES, INC. Table of Contents Chapter 1 General Information....................................
More informationDI DI PUMP PARTS PRICE LIST
ITEM 1 2 2A 5050 Pump Body, 2" NPT Mech. Seal 1 40091 1 5050 Pump Body, 2" 150# RF Flg. Mech. Seal 1 40791 1 5050 Pump Body, 2" NPT, Packing 1 40088 1 5050 Pump Body, 2" 150# RF Flg., Packing 1 40793 1
More information396 Series - General Parts
MTU - Product Code 31-48 - 51 396 Series - General Parts Item Description Product_ Code On Hand Qty 0000535858 VALVE STEM SEAL 31 105 0165314283 BAYONET COUPLING 31 2 0165313783 BAYONET COUPLING 31 4 0165310683
More informationLPM LP-Gas Flowmeter Product Bulletin L LISTED. Primary Features. Specifications 91U3
LP-Gas Flowmeter Product Bulletin U L LISTED 9U Designed for bobtail tank trucks and bulk plants, the LPM-00 offers the widest flow range, (0-00 gpm) available in a meter of this type. The LPM-00 utilizes
More informationRetriever 360G/P. 5/92 revised 2/01 FORM NUMBER
Retriever 360G/P PARTS LIST Advance MODELS 56468470, 56468480 This parts list is for machines after serial number 505073 All models covered in this manual are OBSOLETE 5/92 revised 2/01 FORM NUMBER 56042267
More informationOverview Replacement Meterbody and Heads for Model STD 110
ST 3000 Smart Transmitter, Release 300 and Smart Field Communicator Model STS03 Transmitter Model STD0 34-ST-99-8 04/03 Addendum (to User s Manual 34-ST-5-4B) Overview Replacement Meterbody and Heads for
More informationCS Stationary Engines
CS Stationary Engines Listeroid or Indian Lister or Lister Clones or generally speaking Lister CS (cold start) referred to as stationary engines, are one of the most versatile long running stationary engines
More informationRetriever 5800G/P/D. revised 2/01 Form Number
Retriever 5800G/P/D PARTS LIST Advance MODELS 56482005, 56482010, 56482015 This parts list is for machines after serial number 221134 All models covered in this manual are OBSOLETE revised 2/01 Form Number
More informationFigure 8-1. Frame and External Parts - Coil Chain Models.
Figure 8-1. Frame and External s - Coil Chain Models. Ref. Quantity Required 1/4 Ton 1/2 Ton 1 Ton 1 BAH-105 Bolt - Suspension Bracket 2 2 2 2 BAH-108 Lockwasher - Shakeproof, External 2 2 2 3 BAH-107
More informationU1 PUMP PARTS PRICE LIST
006-014 - 015-018 - 024-U1 PUMP PARTS PRICE LIST ITEM 1 7 8 9 DESCRIPTION QTY. PER PART PUMP 006-U1 Pump Body 1 See Note 1 1 006-U1 Pump Body with Flush 1 See Note 1 1 015-U1 Pump Body 1 See Note 1 1 015-U1
More informationMINING & DRILLING PRODUCTS. N3 Core Retrieval System
MINING & DRILLING PRODUCTS N Core Retrieval System CORE BARREL ASSEMBLY, N - - 090 Core Barrel Assembly, 0 ft (.0 m) - - 09 Core Barrel Assembly, ft (. m) - - 09 Inner Tube Assembly, 0 ft (.0 m) - - 09
More informationSPARE PARTS BOOK. Rear Tandem Axle FRDP-13/16-S. Since No (11/2004) Book No. 292 (5/2009)
SPARE PARTS BOOK S Sisu Axles, Inc. Autotehtaantie 1 PO Box 189 FIN-13101 Hameenlinna Finland Phone +358 204 55 2999 Fax +358 204 55 2900 31.1.2012 1 Axle L870 2 1 11 12 12 5 12 10 12 3 9 6 4 7 15 13 14
More informationCOMPRESSORS 09/97 CB-5C-050. Suggested Spare Parts for LB601 and LB601A Compressors: Qty./ Unit
09/97 CB-5C-050 Suggested Spare Parts for LB601 and LB601A Compressors: Part # Description Qty./ Unit Comm. Qty. 794099 Gasket Set - Buna-N, Aluminum T 1 1 1 794259 Suction Valve Sub-Assembly T 2 2 794279
More informationBody Body Cap O-Ring Ball seat Packing Seat spring Cap Ball seat Retainer gland Packing Seat spring Ball Seat retainer Line pressure Ball Line pressure Cavity pressure Ball seat Seat retainer Cavity pressure
More informationGMC 5 Cultivator. Drawing: 287
GMC 5 Cultivator Drawing: 287 GMC 5 Cultivator Drawing: 287 GMC5-28701 GMC5-28702 GMC5-28703 GMC5-28704 GMC5-28705 GMC5-28706 GMC5-28707 GMC5-28708 GMC5-28709 GMC5-28710 GMC5-28711 GMC5-28712 GMC5-28713
More informationEngine [P-TB216EBA] 3TNV74F-SPTB
Ref. 0-1 Page 0-1 How to read this Parts Catalog Part No. ENGINE 3TNV74F-SPTB 2013.7.15 P-TB216EBA Ref. 0-1 Page 0-1 Ref. 0-2 Page 0-2 CYLINDER BLOCK 26 27 5 4 12 6 4 10 4 13 11 1 23 34 23 34 7 7 7 7 28
More informationMC-44S CONCRETE MIXER
OPERATION AND PARTS MANUAL MC-44S CONCRETE MIXER Revision #7 (01/05/07) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT
More informationAppendix E Part Details for the PZ7 with Standard Bypass Valve
Appendix E Part Details for the PZ7 with Standard Bypass Valve No. Part No. Description Qty. 568 Pump case 66-X6R Rotor-shaft assembly 57 Vane 6 4 46-X Vane driver 5 9 Sideplate 44-XA Seal assbly. (Buna-N
More informationElectronic Service Manuals
Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions
More informationCM Body Assembly Service Parts List CM 93 and CM 04 Body Styles
Document Number Issue Date 12/01/93 Rev. Date 5/11/18 CM Body Assembly Service Parts List CM 93 and CM 04 Body Styles Body Style Identification Pump Material Body Style Pumps Built After 2004 Pumps Built
More informationAIR CLEANER ASSEMBLY (Figure 3-1)
AIR CLEANER ASSEMBLY (Figure 3-1) KEY: A: Yanmar Diesel and GM LPG Engines B: Mazda LPG Engines QTY ITEM PART NO. DESCRIPTION A B 2055193 Air Cleaner Assembly..... 1 1501855 Air Cleaner Assembly... 1..
More informationLycoming Aircraft Engines Parts Catalog
Aircraft Engines Parts Catalog IO-0-BG Wide Cylinder Flange Crankcase Model Engine Part No. PC-0- Oliver Street Williamsport, PA 770 Aircraft Engines Parts Catalog IO-0-BG Wide Cylinder Flange Crankcase
More informationBearing Frame Mount CAST IRON IMPELLER B4EYRMBM TYPE B SINGLE STAGE CENTRIFUGAL PUMP TABLE I
Page 0. Date November, 009 B4EYRMBM Packing Construction 3 8 B/M No. Rotation Case Diameter B50 CW M5 L09.88 80 A 3 See Supplement B 9 3 See Table I Shaft (Not sold separately) See Note 9 Cover, Suction
More informationSmith Meter TM Turbine Meters Models 3" Through 16" MV Series Service
Issue/Rev. 0.1 (1/98) Smith Meter TM Turbine Meters Models 3" Through 16" MV Series Service Bulletin MN02010 Contents Section 1 General Information... Page 2 Return Procedures... Page 2 Section 2 Service...
More informationPARTS CATALOG MODELS 310, 410, 610, 910 GRAIN CART. Unverferth
Unverferth Manufacturing Company, Inc. P.O. Box 357 Kalida, Ohio 45853 (419) 532-3121 FAX (419) 532-2468 Grain Carts PARTS CATALOG 290901 MODELS 310, 410, 610, 910 GRAIN CART REVISED 10-12-00 Unverferth
More informationIllustrated Parts: Flail Mower (BladeRunner) 24 & 30
Illustrated Parts: Flail Mower (BladeRunner) 24 & 30 Revised 7/10/2017 BCS America 5001 N Lagoon Portland, OR 97217 www.bcsamerica.com Phone: 800-543-1040 Fax: 800-777-7069 Flail Mower 24" & 30" Gear Box
More informationH Core Retrieval System
H Core Retrieval System Global Drilling Products Pte Ltd 9 Loyang Way, #0-0, Changi Logistics Centre Singapore 0 Telephone: + 9 info@globaldrillingproducts.com www.globaldrillingproducts.com Core Barrel
More informationSPARE PARTS BOOK. Front Axle SSND-10-S. Book No. 159 (2/2008)
SPARE PARTS BOOK Sisu Axles, Inc. Autotehtaantie 1 PO Box 18 FIN- Hameenlinna Finland Phone +58 0 55 Fax +58 0 55 00 16.8.01 1 Axle L658 8 7 1 6 5 6 7 8 0 1 1 5 1 17 1 15 7 0 1 18 1 0 1 16 5 6 8 7 SSNDA.DS
More informationDouble Case/2-Bladed. Smith Meter PD Rotary Vane Meters. Service. Contents
По вопросам продаж и поддержки обращайтесь: Тел./факс: +7(843)206-01-48 (факс доб.0) fc@nt-rt.ru www.fmc.nt-rt.ru Issue/Rev. 0.4 (9/03) Model Number Smith Meter PD Rotary Vane Meters Double Case/2-Bladed
More information1822-I/1822-IC. Spindle Assembly. Pipe & Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* *
-I/-IC Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support () Pivot Rod () 0 Shoulder Screw
More information320 Series Models 325, 326, 327
0 Series Models,, ROTARY MOWER Published 0/ PARTS MANUAL SECTION An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and
More informationPRODUCT SERVICE MANUAL For G6D-187, 218, 250, 275 and 312 PUMPS
PRODUCT SERVICE MANUAL For G6D-187, 218, 250, 5 and 312 PUMPS WARNING This Instruction Manual and General Instructions Manual, SRM00046, should be read thoroughly prior to pump service, installation, operation
More informationGENSET ENGINE-G25/30. ITEM PART NO. DESCRIPTION QTY QTY REMARKS No. G25 G30
ITEM PART NO. DESCRIPTION QTY QTY REMARKS No. G25 G30 1 CONTENTS SHEET DESCRIPTION PAGE NO. NO. E-1 CYLINDER BLOCK, LINER AND OIL SUMP 2 E-2 CYLINDER HEAD 6 E-3 PISTON AND CONNECTING ROD ASSY 10 E-4 CRANK
More information365L (2001) Page 1 of 36 54" Deck Assembly
365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting
More informationFKL PUMP HEAD ASSEMBLY
FKL Series Pumps 14 FKL PUMP HEAD ASSEMBLY (FOR COP PUMP HEAD ASSEMBLY, SEE PAGE 21) 25 24 51 28 12b 31 23 53 52 15 30 29 9b 26 10 3 5 12600616 7/1/2011 33 32 11b 36 FKL PUMP GEARBOX ASSEMBLY 39d 34 9a
More informationSmith Meter TM PD Rotary Vane Meters F4-S1/A1-S3/A3 PRIME Upgrade Upgrade and Service
Issue/Rev. 0.2 (3/01) Smith Meter TM PD Rotary Vane Meters F4-S1/A1-S3/A3 PRIME Upgrade Upgrade and Service Bulletin MN01039 Contents Section 1 General Information... Page 2 Section 2 Meter Disassembly
More informationIlustrated Parts List
Spicer Drive Axles Ilustrated Parts List Spicer All Wheel 4 x 4 Drive System AXIP-0400 November 1999 Page to Insert The Spicer 4x4 Drive System Axle models and other equipment covered in this publication
More informationAdditive Injectors. AccuPlus. Maintenance. The Most Trusted Name In Measurement
Additive Injectors AccuPlus Issue/Rev. 0.0 (11/12) Maintenance Bulletin MN05003E The Most Trusted Name In Measurement Caution The default or operating values used in this manual should not be construed
More informationOne Step Rod Cutter Rear Pull
One Step Rod Cutter Rear Pull Drivelines Section 13 Model Years 1988 1991 (Secondary Driveline) 1 Solid Shaft... 2-5 Model Years 1988 1992 (Primary Driveline) G & G... 6-11 Model Year 1992 (Secondary Driveline)
More informationEC-42S ESSICK SERIES CONCRETE MIXER COPYRIGHT 2004, MULTIQUIP INC.
OPERATION AND PARTS MANUAL EC-42S ESSICK SERIES CONCRETE MIXER COPYRIGHT 2004, MULTIQUIP INC. FINAL REVISION Revision #8 (12/16/05) MULTIQUIP INC. PARTS DEPARTMENT: 18910 WILMINGTON AVE. 800-427-1244 CARSON,
More informationEXPLODED VIEW & PARTS LIST
SECTION 8 EXPLODED VIEW & PARTS LIST ALUMINUM, A300-*AA-****-*** 10 20 30 352 40 322 40 OPTIONAL 311 342 360 323 381 312 321 61 62 70 385 341 383 80 90 100 110 120 130 140 150 160 353 170 355 372 384 330
More informationMODEL NO & UP SAFETY AND INSTRUCTION DECALS
FORM NO. 95-2194 REV. B MODEL NO. 41105-90001 & UP PARTS CATALOG MULTI PRO 1100 VEHICLE SAFETY AND INSTRUCTION DECALS The following safety and instruction decals are installed on the vehicle. If any become
More informationLYCOMING A Textron Company
LYCOMING AEIO-360-HB PARTS CATALOG This illustrated parts catalog contains a complete parts listing for the Lycoming AEIO-360-HB wide cylinder flange crankcase model aircraft engines. Major assembly and
More informationPUBLICATION REVISION
Lycomlng 65 Oliver Street Williamsport, PA 770 U.S.A. 77/-6 TECHNICAL PUBLICATION REVISION REVISIOI No. PUBLICATION PUBLICATION No. PUBLICATION DATE IO-60-LA PC-06-A Engines PC-06- MAY, 996 This page(s)
More informationMarine Generators Marine Diesel Engines Land-Based Generators
P1066 For Models: L1066T, L1066A, L1066H, M1066T, M1066A1, M1066A2, M1066A3, M1066H, M1066TMCA, NL1066T, NL1066H1, NL1066H2, NL1066H3, NL1066H4, and M99C2 PARTS CATALOG Marine Generators Marine Diesel
More informationFRONT RACK, BODY PANEL, AND HEADLIGHT ASSEMBLIES
FRONT RACK, BODY PANEL, AND HEADLIGHT ASSEMBLIES 0747-506 1 2506-107 1 Rack, Front - Assembly (inc. 2) 2 0411-576 1 Decal, Warning - Load 3 0441-592 4 Bushing 4 8410-835 4 Screw, Cap 5 0423-669 4 Spacer
More informationX4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY
2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY 2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 2 of 80 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3570-001 1 /P Intake,
More informationSPARE PARTS BOOK. Rear Tandem Axle FRDP FRDP16S0879/011&013 Up to S/N (Nov 2004) Book No. 247 (2/2007)
SPARE PARTS BOOK Rear Tandem Axle ) Sisu Axles, Inc. Autotehtaantie 1 PO Box 19 FIN-101 Hameenlinna Finland Phone +35 20 55 99 Fax +35 20 55 00 2.2.2007 1 Axle L71 2 1 5 3 9 7 10 11 1 1 15 Breather 1 Breather
More informationTEXTRON Lycoming AIRCRAFT ENGINES
TEXTRON Lycoming AIRCRAFT ENGINES O-60-AP Wide Cylinder Flange Crankcase Model Engines PARTS CATALOG PC-06-6 MARCH 99 0-60-AP PARTS CATALOG This illustrated parts catalog contains a complete parts listing
More informationSPARE PARTS BOOK. Front Axle FSDP-09/10-S. Book No. 201 (12/2009)
SPARE PARTS BOOK Front Axle S Sisu Axles, Inc. Autotehtaantie 1 PO Box 189 FIN-13101 Hameenlinna Finland Phone +358 20 55 2999 Fax +358 20 55 2900 1.12.2009 1 Axle L577 10 8 9 12 1 13 11 "A" "B" 6 5 1
More informationATV 50 Y-6 YOUTH CAT GREEN (A2004ATA2BUSZ) Page 1 of 50 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY
2004 ATV 50 Y-6 YOUTH CAT GREEN (A2004ATA2BUSZ) Page 1 of 50 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY 2004 ATV 50 Y-6 YOUTH CAT GREEN (A2004ATA2BUSZ) Page 2 of 50 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY
More informationREPAIR PARTS LIST 31
LIST 31 Part Number Size Description List Price 0109-09-1601 16" Cover - Mild Steel $85.92 0109-03-1601 16" Cover - Aluminum $136.26 0109-07-1601 16" Cover - Stainless Steel 304 $329.09 0109-09-2001 20"
More informationSHEET DESCRIPTION PAGE NO. NO.
CONTENTS SHEET DESCRIPTION PAGE NO. NO. E-1 CYLINDER BLOCK, LINER AND OIL SUMP 2 E-2 CYLINDER HEAD 6 E-3 PISTON AND CONNECTING ROD ASSY 10 E-4 CRANK SHAFT 12 E-5 TIMING GEAR COVER & SEALING 14 E-6 TIMING
More information