TECHNICAL BROCHURE BeSV60 R8. e-sv. 60 Hz Technical Manual E-SV SERIES VERTICAL MULTI-STAGE PUMPS

Transcription

1 TECHNICAL BROCHURE BeSV6 R8 e-sv 6 Hz Technical Manual E-SV SERIES VERTICAL MULTI-STAGE PUMPS

2 PAGE 2

3 Contents Coverage Curves General Market Specifications Characteristics of 1-22SV Series... 6 Characteristics of -125SV Series General Characteristics Typical Applications of e-sv Pumps... 8 e-sv Nomenclature SV Series Pump Cross Section and Main Components SV Series Pump Cross Section and Main Components SV Series Pump Cross Section and Main Components e-sv Mechanical Seals Maximum Allowable Working Pressure Charts Maximum Inlet Pressure / Motor Data - Starts Per Hour Motor Data RPM Curves, Dimensions and Weights RPM Curves, Dimensions and Weights Horizontal Mounting Options Table of Hydraulic Performances at 5 RPM Table of Hydraulic Performances at 175 RPM Technical Appendix e-sv Rating Plate 1 Catalog Number 2 Capacity Range TDH Range 4 Rated Speed 5 Rated Horsepower 6 Maximum Operating Pressure 7 Maximum Operating Temperature 8 Pump Serial Number PAGE

4 e-sv Coverage Curve METERS 5 FEET 12 5 RPM SV SV SV SV 5SV 1SV 15SV SV 46 SV 66 SV 92 SV GPM m /h METERS FEET 175 RPM SV 66 SV 92 SV 125SV 5 1SV SV 5SV 1SV 15SV 46 SV SV GPM m /h PAGE 4

5 e-sv General Market Specifications MUNICIPAL, AGRICULTURAL, LIGHT INDUSTRY, WATER TREATMENT, HEATING AND AIR CONDITIONING Applications Handling of water, free of suspended solids, in the municipal, industrial and agricultural markets Pressure boosting and water supply systems Fire fighting jockey pumps Irrigation systems Wash systems Water treatment plants: reverse osmosis Handling of moderately aggressive liquids, demineralized water, water and glycol, etc. Circulation of hot and cold water for heating, cooling and conditioning systems Boiler feed Specifications PUMP The e-sv pump is a non-self priming vertical multistage pump coupled to a standard motor. The liquid end, located between the upper cover and the pump casing, is held in place by tie rods. The pump casing is available with different configurations and connection types. Delivery: up to 725 GPM Head: up to 12 feet Temperature of pumped liquid: -2ºF to 25ºF (-ºC to 12ºC) standard version Optional temperature range up to ºF (149ºC) high temperature version Maximum operating pressure SV1-22 with oval flanges: 2 PSI (16 bar) SV1-22 with round flanges or Victaulic: 6 or 575 PSI (25 or 4 bar) SV, 46: 6 or 58 PSI (25 or 4 bar)* SV 66, 92: 6 or 58 PSI (25 or 4 bar)* SV 125: 6 or 58 PSI (25 or 4 bar) Direction of rotation: clockwise looking at the pump from the top down (marked with an arrow on the adapter and on the coupling). MOTOR Standard NEMA TC Frame motors in open drip proof or totally enclosed fan cooled. 5 RPM nominal Standard voltage: Single phase version: /2 V, 6 Hz up to HP or 28-2 V for 5 HP Three phase version, 2 pole: 28-2/46 V, 6 Hz up 75 HP * Based on pump staging PAGE 5

6 e-sv Characteristics 1SV, SV, 5SV, 1SV, 15SV, 22SV Series Vertical multistage centrifugal pump. All metal parts in contact with the pumped liquid are made of stainless steel. The following versions are available: F ANSI flanges, in-line delivery and suction ports, AISI 4 T Oval flanges (NPT), in-line delivery and suction ports, AISI 4 R ANSI flanges, delivery port above the suction port, with four adjustable positions, AISI 4 N ANSI flanges, in-line delivery and suction ports, AISI 16 P Victaulic couplings, in-line delivery and suction ports, AISI 16 G ANSI flange, in-line delivery and suction ports, Class 5/4B cast iron. C ISO clamp, AISI 16 Innovative axial load compensation system on pumps with higher head. This ensures reduced axial thrusts and enables the use of standard NEMA TC motors that are easily found in the market. Seal housing chamber designed to prevent the accumulation of air in the critical area next to the mechanical seal Mechanical seal according to EN (ex DIN 2496) and ISO 69 Versions with ANSI flanges that can be coupled to ANSI raised face counter-flanges Threaded oval counter-flanges made of stainless steel are standard supply for the T versions Easy maintenance. No special tools required for assembly or disassembly Standard version for temperatures ranging from: -2ºF to 25ºF (ºC to 12ºC) SV, 46SV, 66SV, 92SV, 125SV Series Vertical multistage centrifugal pump with impellers, diffusers and outer sleeve made entirely of stainless steel, and with pump casing and motor adapter made of cast iron in the standard version Rotating components made entirely of AISI 16 stainless steel High heads and capacities five sizes: SV, 46SV, 66SV, 92SV, 125SV Re-designed liquid end provides improved efficiency and energy savings Innovative axial load compensation system on pumps with higher head. This ensures reduced axial thrusts and enables the use of standard NEMA TC motors that are easily found in the market. Balanced mechanical seal according to EN (ex DIN 2496) and ISO 69, which can be replaced without removing the motor from the pump Seal housing chamber designed to prevent the accumulation of air in the critical area next to the mechanical seal Standard version for temperature ranging from: -2ºF to 25ºF (-ºC to 12ºC) Pump body fitted with taps for installing pressure gauges on both suction and delivery flanges In-line ports with ANSI flanges that can be coupled to counter-flanges, in compliance with ANSI raised face. Mechanical sturdiness and easy maintenance. No special tools required for assembly or disassembly. Optional Features Horizontal version Special voltages, 5 Hz frequency Special materials for the mechanical seal, gaskets and elastomers Tropicalized motors Premium E and explosion proof motors 175 RPM, 4 pole motors Passivation PAGE 6

7 General Characteristics 2-pole SERIES SVT 1SV, SV, 5SV, 1SV, 15SV, 22SV SERIES SVF, SVN 1SV, SV, 5SV, 1SV, 15SV, 22SV SERIES SVR 1SV, SV, 5SV, 1SV, 15SV, 22SV SERIES SVP VICTAULIC 1SV, SV, 5SV, 1SV, 15SV, 22SV SERIES SVG, SVN SV, 46SV, 66SV, 92SV, 125SV e-sv Product Range 1SV SV 5SV 1SV 15SV 22SV SV 46SV 66SV 92SV 125SV Nominal Flow (GPM) Flow Range(GPM) Max. Head (Ft) Max. Working Pressure (PSIG) 58 6/58 Temperature Range ( F) Standard -2 F - 25 F (- C C) High Temp Option up to F (15 C) Motor Power [HP] ½ 5 HP ½ 7½ ¾ 1 ¾ ½ Max Pump Efficiency 51% 6% 7% 7% 7% 71% 76% 78% 78% 8% 79% Materials of Construction SVT 4 SS SVF 4 SS SVN 16L SS Cast Stainless Steel / 16L SS SVR 4 SS SVP 16L SS SVC 16L SS SVG Connection Sizes ASTM Class 5/4B Cast Iron / 4 SS SVT - Oval NPT 1¼" 1¼" 1¼" 2" 2" 2" SVF - Round ANSI 1¼" 1¼" 1¼" 2" 2" 2" Size/Class # # # # # # SVN - Round ANSI 1¼" 1¼" 1¼" 2" 2" 2" 2½" " 4" 4" 5" Size/Class # # # # # # 15/# 15/# 15/# 15/# 15/# SVR - Top/Bottom Round 1¼" 1¼" 1¼" 2" 2" 2" ANSI Size/Class # # # # # # SVP - Victaulic 1¼" 1¼" 1¼" 2" 2" 2" SVC - Clamp 1½" 1½" 1½" 2" 2" 2" SVG - Cast Iron 1¼" 1¼" 1¼" 2" 2" 2" 2½" " 4" 4" 5" Size/Class 25# 25# 25# 25# 25# 25# 125/25# 125/25# 125/ 25# 125/ 25# 125/25# PAGE 7

8 Typical Applications of e-sv Series Multi-Stage Pumps Water Supply and Pressure Boosting Pressure boosting in buildings, hotels, residential complexes Pressure booster stations, supply of water networks Booster packages Water Treatment Ultra filtration systems Reverse osmosis systems Water softeners and de-mineralization Distillation systems Filtration Light Industry Washing and cleaning plants (washing and degreasing of mechanical parts, car and truck wash tunnels, washing of electronic industry circuits) Commercial washers Fire fighting system pumps Irrigation and Agriculture Greenhouses Humidifiers Sprinkler irrigation Heating, Ventilation and Air Conditioning (HVAC) Cooling towers and systems Temperature control systems Refrigerators Induction heating Heat exchangers Boilers Water recirculation and heating PAGE 8

9 e-sv Product Line Numbering System for 1 22SV Liquid End Only The various versions of the e-sv line are identified by a product code number on the pump label. This number is also the catalog number for the pump. The meaning of each digit in the product code number is shown below. Note: Not all combinations are possible. Example Product Code 22 SV 2 F E Special Configurations (optional Characters) A = Cooling Chamber only B = Cooling Chamber + Passivation C = Cooling Chamber + Low NPSH F = Destaged - 1 stage G = Destaged - 2 stage H = Horizontal mount only J = Horizontal mount + Passivation K = Horizontal mount + Low NPSH L = Horizontal mount + High Pressure N = Low NPSH only P = Passivation only S = Customized Configuration Z = High pressure only Seal Material = Carb-SilCar-Viton (Standard) 1 = Carb-SilCar-AFLAS (HighTemp) 2 = SilCar-SilCar-Viton 4 = SilCar-SilCar-EPR 6 = Carb-SilCar-EPR Pole-Hz 1 = 2 5 = = = 4 6 Motor Frame (NEMA) A = 56C B = 18TC C = 21TC D = 25TC E = 28TC Configuration C = Clamp-16 P = Victaulic-16 Top / Bottom R = (SVC) 12Suct-12Disch F = Round-4 (SVB) T = Oval-4 (SVA) W = (SVC) 12Suct-Disch G = CI-4 X = (SVC) 12Suct-6Disch N = Round-16 (SVD) Y = (SVC) 12Suct-9Disch Suction discharge location Total Number of Impeller Stages (may be 1 or 2 characters) Product Line: SV Stainless Vertical Nominal Flow: 1 = 5 GPM 1 = 5 GPM = 16 GPM 15 = 8 GPM 5 = 26 GPM 22 = 116 GPM PAGE 9

10 e-sv Product Line Numbering System for 125SV Liquid End Only The various versions of the e-sv line are identified by a product code number on the pump label. This number is also the catalog number for the pump. The meaning of each digit in the product code number is shown below. Note: Not all combinations are possible. Example Product Code 125 SV B F E 2 Special Configurations (optional Characters) H = Horizontal mount only J = Horizontal mount + Passivation K = Horizontal mount + Low NPSH (, 46 and 66 only) L = Horizontal mount + High Pressure N = Low NPSH only (, 46 and 66 only) S = Customized Configuration Z = High pressure (25/# pump body) Seal Material = Carb-SilCar-Viton 2 = SilCar-SilCar-Viton 4 = SilCar-SilCar-EPR 6 = Carb-SilCar-EPR 7 = Carb-SilCar-Viton (Cart) 8 = SilCar-SilCar-EPR (Cart) Pole-Hz 1 = 2 5 = = = 4 6 Motor Frame (NEMA) B = 18TC C = 21TC D = 25TC E = 28TC F = 2TSC G = 6TSC Configuration G = Round-CI-4 N = Round SV ONLY Reduced Trim Diameter A = 141 mm B = 16 mm C = 145 mm (full dia.) Blank if -92SV Number of Reduced Trim Impellers Total Number of Impellers/Stages Product Line: SV Stainless Vertical Nominal Flow: = 175 GPM 46 = 24 GPM 66 = 5 GPM 92 = 485 GPM 125 = 66 GPM PAGE 1

11 e-sv Product Line Numbering System for 1 22SV Pump & Motor Combination The various versions of the e-sv line are identified by a product code number on the pump label. This number is also the catalog number for the pump. The meaning of each digit in the product code number is shown below. Note: Not all combinations are possible. Example Product Code 2 SV 2 2 F A 2 F 5 1 A H Special Configurations (1 or 2 Characters) A = Cooling Chamber only B = Cooling Chamber + Passivation C = Cooling Chamber + Low NPSH F = Destaged - 1 stage G = Destaged - 2 stage H = Horizontal mount only J = Horizontal mount + Passivation K = Horizontal mount + Low NPSH L = Horizontal mount + High Pressure M = i-alert N = Low NPSH only P = Passivation only S = Customized Configuration Z = High Press (25/# pump body) Seal Material = Carb-SilCar-Viton 4 = SilCar-SilCar-EPR 1 = Carb-SilCar-AFLAS (HighTemp) 6 = Carb-SilCar-EPR 2 = SilCar-SilCar-Viton Motor Enclosure 1 = ODP 5 = Prem-ODP 9 = Marine 2 = TEFC 6 = Prem-TEFC A = Chem = X-Proof 7 = Prem-XP B = Prem-Chem 4 = WD - Tropical 8 = Prem-WD C = Class 1 Div 2 Voltage A = 115/2 H = 19/8 R = 22 B = 2 J = 115/28-2 S = 415 C = 2/46 K = 28 T = 22/8 WYE D = 46 L = 28-2 U = 8-66 WYE E = 575 M = 19-8/415 V = 28-2/46 WYE F = 28-2/46 N = 8 W = 22/8/44 G = 2 P = 11/22 Pole-Hz-Phase 1 = = = = 4-5- = = = = 4-6- HP Rating A =.5 F = L = 2 S = 6 B =.75 G = 5 M = 25 T = 75 C = 1. H = 7.5 N = U = 1 D = 1.5 J = 1 P = 4 E = 2 K = 15 R = 5 Configuration OPTION C = Clamp-16 F = Round-4 (SVB) R = Top / Bottom (SVC) 12Suct-12Disch G = CI-4 W = (SVC) 12Suct-Disch N = Round-16 (SVD) X = (SVC) 12Suct-6Disch P = Victaulic-16 Y = (SVC) 12Suct-9Disch T = Oval-4 (SVA) Total Number of Impeller Stages (may be 1 or 2 characters) Product Line: SV Stainless Vertical Nominal Flow: 1 = 5 GPM 1 = 5 GPM = 16 GPM 15 = 8 GPM 5 = 26 GPM 22 = 116 GPM Suction discharge location PAGE 11

12 e-sv Product Line Numbering System for 125SV Pump & Motor Combination The various versions of the e-sv line are identified by a product code number on the pump label. This number is also the catalog number for the pump. The meaning of each digit in the product code number is shown below. Note: Not all combinations are possible. Example Product Code 125 SV 8 2 A G K F 2 PAGE 12 Special Configurations (1 or 2 Characters) H = Horizontal mount only J = Horizontal mount + Passivation K = Horizontal mount + Low NPSH L = Horizontal mount + High Pressure M = i-alert N = Low NPSH only (, 46 and 66 only) P = Passivation only S = Customized Configuration Z = High Press (25/# pump body/casing) Seal Material = Carb-SilCar-Viton 6 = Carb-SilCar-EPR 2 = SilCar-SilCar-Viton 7 = Carb-SilCar-Viton (Cart) 4 = SilCar-SilCar-EPR 8 = SilCar-SilCar-EPR (Cart) Motor Enclosure 1 = ODP 5 = Prem-ODP 9 = Marine 2 = TEFC 6 = Prem-TEFC A = Chem = X-Proof 7 = Prem-XP B = Prem-Chem 4 = WD - Tropical 8 = Prem-WD C = Class 1 Div 2 Voltage A = 115/2 H = 19/8 R = 22 B = 2 J = 115/28-2 S = 415 C = 2/46 K = 28 T = 22/8 WYE D = 46 L = 28-2 U = 8-66 WYE E = 575 M = 19-8/415 V = 28-2/46 WYE F = 28-2/46 N = 8 G = 2 P = 11/22 Pole-Hz-Phase 1 = = = = = = 4-6- = = 4-5- HP Rating F = L = 2 R = 5 G = 5 M = 25 S = 6 H = 7.5 N = T = 75 J = 1 P = 4 U = 1 K = 15 Configuration G = Round-CI-4 N = Round SV ONLY Reduced Trim Diameter A = 141 mm B = 16 mm C = 145 mm (full dia.) Blank if -92SV Number of Reduced Trin Impeller Total Number of Impeller Stages (may be 1 or 2 characters) Product Line: SV Stainless Vertical Nominal Flow: = 175 GPM 92 = 485 GPM 46 = 24 GPM 125 = 66 GPM 66 = 5 GPM

13 Base Models: 1-22SV Major Components PAGE 1

14 Base Models: 1-22SV Major Components F, G, P, R VERSIONS Ref. No. Name Material Reference Standards USA Europe 1 Pump Body Stainless Steel (F, P, R) AISI 4 EN X5-CrNi18-1 (1.41) Cast Iron (G) ASTM Class 5/4B EN 1561 GJL 25 (JL14) 2 Impeller Stainless Steel AISI 4 EN X5-CrNi18-1 (1.41) Diffuser Stainless Steel AISI 4 EN X5-CrNi18-1 (1.41) 4 Casing Stainless Steel AISI 16L EN X2-CrNiMo (1.444) 5 Shaft Stainless Steel AISI 16 EN X2-CrNiMo (1.441) 6 Adapter Cast Iron ASTM Class 5/4B EN 1561-GJL-25 (JL14) 7 Base Aluminum (F, P, R) A84.-F EN 176-AC-AlSi11Cu2(Fe) (AC461) N/A (G) N/A N/A 8 Coupling Aluminum A84.-F EN 176-AC-AlSi11Cu2(Fe) (AC461) 9 Seal Plate Stainless Steel AISI 16L EN X2-CrNi (1.444) 1 Mechanical Seal Silicon Carbide / Carbon / Viton (opt. EPDM) 11 Elastomers Viton (opt. EPDM) 12 Coupling Guard Stainless Steel AISI 4 EN X5-CrNi18-1 (1.41) 1 Shaft Sleeve and Bushing Tungsten Carbide 14 Fill/Drain Plugs Stainless Steel AISI 16 EN X2-CrNiMo (1.441) 15 Tie Rods Carbon Steel / Zinc Plated A29 Gr. 145 EN Wear Ring PPS 17 Seal Gland Stainless Steel AISI 16 EN X2-CrNiMo (1.441) N, P, C VERSIONS Ref. No. Name Material 1 Pump Body Stainless Steel AISI 16L 2 Impeller Stainless Steel AISI 16L Diffuser Stainless Steel AISI 16L 4 Casing Stainless Steel AISI 16L 5 Shaft Stainless Steel AISI 16 USA Reference Standards Europe EN X2-CrNiMo (1.444) EN X2-CrNiMo (1.444) EN X2-CrNiMo (1.444) EN X2-CrNiMo (1.444) EN X2-CrNiMo (1.441) 6 Adapter Cast Iron ASTM Class 5/4B EN 1561-GJL-25 (JL14) 7 Base Aluminum A84.-F EN 176-AC-AlSi11Cu2(Fe) (AC461) 8 Coupling Aluminum A84.-F EN 176-AC-AlSi11Cu2(Fe) (AC461) 9 Seal Plate Stainless Steel AISI 16L EN X2-CrNi (1.444) 1 Mechanical Seal Silicon Carbide / Carbon / Viton (opt. EPDM) 11 Elastomers Viton (opt. EPDM) 12 Coupling Guard Stainless Steel AISI 4 EN X5-CrNi18-1 (1.41) 1 Shaft Sleeve and Bushing Tungsten Carbide 14 Fill/Drain Plugs Stainless Steel AISI Tie Rods Carbon Steel / Zinc Plated A29 Gr. 145 EN Wear Ring PPS 17 Seal Gland Stainless Steel AISI 16 EN X2-CrNiMo (1.441) EN X2-CrNiMo (1.441) PAGE 14

15 Base Model: SV, 46SV, 66SV and 92SV Major Components SV G-N A LESS PISTON WITH PISTON PAGE 15

16 Base Model: SV, 46SV, 66SV and 92SV Major Components SVG ( 92SV) SVN ( 92SV) No. Description Material ASTM DIN Material ASTM DIN 1 O-Ring, Piston Seal Viton (std) EPDM (opt) Viton (std) EPDM (opt) 2 O-Ring, Mechanical Seal Sleeve Viton (std) EPDM (opt) Viton (std) EPDM (opt) O-Ring, Seal housing Viton (std) EPDM (opt) Viton (std) EPDM (opt) 4 O-Ring, Sleeve Viton (std) EPDM (opt) Viton (std) EPDM (opt) 5 Mechanical Seal See Seal Materials Chart for Complete Detail See Seal Materials Chart for Complete Details 5A Cartridge Seal (not shown) 6 Screw, Guard Stainless Steel A Stainless Steel A Screw, Piston Holding Disc Stainless Steel A Stainless Steel A Screw, Coupling Zinc Plated Steel B6 Zinc Plated Steel B6 9 Screw, MA and Seal Housing Zinc Plated Steel B6 Zinc Plated Steel B6 1 Screw, Impeller Stainless Steel A Stainless Steel A Washer, Coupling Carbon Steel A18 Carbon Steel A18 12 Washer, Impeller Stainless Steel A Stainless Steel A Pin, Coupling Carbon Steel A18 Carbon Steel A18 14 Plug, with Piston Stainless Steel A Stainless Steel A Plug, without Piston Stainless Steel A Stainless Steel A Plug, Fill Stainless Steel/O-Ring A Stainless Steel/O-Ring A Plug, Vent (not shown) Stainless Steel/O-Ring A Stainless Steel/O-Ring A Plug, Drain Stainless Steel/O-Ring A Stainless Steel/O-Ring A Pump Head Cast Iron A48 Class 5 JL1 Stainless Steel 16 CF8M Impeller, Full Diameter Stainless Steel A19-16L Stainless Steel A19-16L Impeller, Reduced Diameter Stainless Steel A19-16L Stainless Steel A19-16L Lower Bearing Assembly SS/Cast Iron A19-16L/A48 Class /JL1 Stainless Steel A19-16L/16 CF8M 1.444/ Piston Duplex SS A182-F Duplex SS A182-F Diffuser, Final Stainless Steel A19-16L Stainless Steel A19-16L Diffuser with Carbon Bushing Stainless Steel A19-16L Stainless Steel A19-16L Diffuser with Tungsten Bushing Stainless Steel A19-16L Stainless Steel A19-16L Outer Sleeve, 25 Bar Stainless Steel A19-16L Stainless Steel A19-16L A Outer Sleeve, 4 Bar Stainless Steel A19-16L Stainless Steel A19-16L Holding Disc, Piston Seal Stainless Steel A19-16L Stainless Steel A19-16L Seal Housing Cast Iron A48 Class 5 JL1 Stainless Steel 16 CF8M Spacer, Impeller Final Stainless Steel A Stainless Steel A Spacer, Shaft Bushing Stainless Steel A Stainless Steel A Spacer, Impeller Stainless Steel A Stainless Steel A Spacer, Impeller Lower (66-92SV) Stainless Steel A Stainless Steel A Bushing, Non-Piston Stainless Steel A Stainless Steel A Tungsten Carbide Bushing Tungsten Carbide Tungsten Carbide 6 Coupling Guard Stainless Steel A Stainless Steel Shaft Duplex SS A182-F Duplex SS A18-F Mechanical Seal Shaft Sleeve Stainless Steel A Stainless Steel A Wear Ring, Impeller PPS Glass Filled PPS Glass Filled 4 Piston Seal Impregnated Carbon Impregnated Carbon 41 Stop Ring, Impeller Stainless Steel A Stainless Steel A Pump Body Cast Iron A48 Class 5 JL1 Stainless Steel 16 CF8M Motor Adapter Plate (not shown) Cast Iron A48 Class 25 JL1 Cast Iron A48 Class 25 JL1 44 Motor Adapter Cast Iron A48 Class 25 JL1 Cast Iron A48 Class 25 JL1 45 Coupling, Half Cast Iron A48 Class 25 JL1 Cast Iron A48 Class 25 JL1 46 Nut, Tie-Rod Zinc Plated Steel B6 Zinc Plated Steel B6 47 Tie-Rod Zinc Plated Steel B6 Zinc Plated Steel B6 48 Washer, Tie-Rod Zinc Plated Steel B6 Zinc Plated Steel B6 49 Spring, Final Diffuser Stainless Steel A Stainless Steel A PAGE 16

17 Base Models: 125SV Major Components SV G-N PAGE 17

18 Base Models: 125SV Major Components G VERSIONS Ref. No. Name Material USA Reference Standards Europe 1 Pump Body Cast Iron ASTM Class 5/4B EN 1561-GJL-25 (JL14) 2 Impeller Stainless Steel AISI 4 EN X5-CrNi18-1 (1.41) Diffuser Stainless Steel AISI 4 EN X5-CrNi18-1 (1.41) 4 Casing Stainless Steel AISI 16L 5 Shaft Duplex Stainless Steel UNS S 18 6 EN X2-CrNiMo (1.444) EN X17-CrNiMoN22-5- (1.457) Adapter (up to 4HP) Cast Iron ASTM Class 25 EN 1561-GJL-2 (JL14) Adapter (5HP and higher) ASTM Class A56 EN 1561-GJL-5-7 (JS15) 7 Wear Ring PPS 8 Coupling (up to 4HP) Cast Iron A84.-F EN 176-AC-AlSi11Cu2(Fe) (AC461) Coupling (5HP and higher) 9-9A Upper Head / Seal Housing Cast Iron ASTM Class 5/4B EN 1561-GJL-25 (JL14) 1 Mechanical Seal Silicon Carbide / Carbon / Viton (opt. EPDM) 11 Elastomers Viton (opt. EPDM) 12 Coupling Guard Stainless Steel AISI 4 EN X5-CrNi18-1 (1.41) 1 Shaft Sleeve and Bushing Tungsten Carbide 14 Bushing for Diffuser Carbon 15 Fill/Drain Plugs Stainless Steel AISI Tie Rods Carbon Steel / Zinc Plated A29 Gr. 145 EN 1277 EN X2-CrNiMo (1.441) 17 Adapter Ring Stainless Steel AISI 4 EN X5-CrNi18-1 (1.41) N VERSIONS Ref. No. Name Material USA Reference Standards Europe 1 Pump Body Stainless Steel AISI 16 EN X2-CrNiMo (1.441) 2 Impeller Stainless Steel AISI 16 EN X2-CrNiMo (1.441) Diffuser Stainless Steel AISI 16 EN X2-CrNiMo (1.441) 4 Casing Stainless Steel AISI 16L EN X2-CrNiMo (1.444) 5 Shaft Duplex Stainless Steel UNS S 18 6 EN X17-CrNiMoN22-5- (1.457) Adapter (up to 4HP) Cast Iron ASTM Class 25 EN 1561-GJL-2 (JL14) Adapter (5HP and higher) ASTM Class A56 EN 1561-GJL-5-7 (JS15) 7 Wear Ring PPS 8 Coupling (up to 4HP) Cast Iron A84.-F EN 176-AC-AlSi11Cu2(Fe) (AC461) Coupling (5HP and higher) 9-9A Upper Head / Seal Housing Stainless Steel AISI 16 EN X2-CrNiMo (1.441) 1 Mechanical Seal Silicon Carbide / Carbon / Viton (opt. EPDM) 11 Elastomers Viton (opt. EPDM) 12 Coupling Guard Stainless Steel AISI 4 EN X5-CrNi18-1 (1.41) 1 Shaft Sleeve and Bushing Tungsten Carbide 14 Bushing for Diffuser Carbon 15 Fill/Drain Plugs Stainless Steel AISI 16 EN X2-CrNiMo (1.441) 16 Tie Rods Carbon Steel / Zinc Plated A29 Gr. 145 EN Adapter Ring Stainless Steel AISI 4 EN X5-CrNi18-1 (1.41) PAGE 18

19 e-sv Mechanical Seals 1 22SV 125SV Pump Code 1SV thru 22SV SV thru 125SV Rotating Face 1 Carbon 2 4 Silicon Carbide Graphite Filled 6 Carbon 1 FDA Grade Carbon Carbon 2 4 Silicon Carbide Graphite Filled 6 Carbon Stationary Face 2 Silicon Carbide Graphite Filled Silicon Carbide Graphite Filled Elastomers Viton EPR AFLAS Viton EPR Spring 4 16SS 16SS Metal Components 5 16SS 16SS Elastomer Temp Limits F ( C) F (-1-2 C) - - F (-4-15 C) F (-1-2 C) F (-1-2 C) F ( C) Seal Temp Max. Working Application Limits F ( C) Pressure F up to F (149 C) F ( C) 58 psi (4 bar) 255 psi (17.6 bar) 58 psi (4 bar) General Service Severe Duty Severe Duty Boiler Feed General Service Boiler Feed Boiler Feed General Service Severe Duty Severe Duty Boiler Feed General Service Boiler Feed VENT 1 8 NPT Rotating Stationary Elastomers Spring Sleeve Set Screw Locking Pump Face Face Collar SV Carbon Viton 46SV Silicon 16SS 16SS SS 16SS 66SV Carbide Silicon EPR 92SV Carbide CARTRIDGE SEAL VENT 1 8 NPT PULLER HOLES PAGE 19

20 Maximum Allowable Working Pressure Charts 8 1SV-22SV MAXIMUM WORKING PRESSURE (PSIG) EPR Viton CLASS 25 ASTM A48 CLASS 5 G TRI CLAMP C & CLASS -4L/16L R, W, XY OVAL T VICTAULIC, TRI CLAMP & OVAL ONLY GO TO 25F TEMPERATURE (F) VICTAULIC P CLASS -4L/16L F & N Standard Seal Limit High Temperature Seal Limit 8 SV-125SV MAXIMUM WORKING PRESSURE (PSIG) EPR Viton CLASS -16 N CLASS 25 ASTM A48 CLASS 5 G CLASS N CLASS 125 ASTM A48 CLASS 5 G Seal Limit TEMPERATURE (F) PAGE 2

21 Maximum Inlet Pressure The following table shows the maximum permissible inlet pressure. However, the actual inlet pressure + pressure against a closed valve must always be lower than the maximum permissible operating pressure. p1max PN - pmax Having the following meaning of the symbols: pmax = Maximum pressure delivered by the pump p1max = Maximum inlet pressure PN = Maximum operating pressure Motor Data Starts per Hour / Minimum Run Time HP Maximum Starts per Hour* Minimum run time between starts (seconds) NOTE(S) 1) Recommended motor starts per hour and minimum run time calculated based on NEMA standards MG in accordance to manufacturers allowable tolerance for heat rise and insulation breakdown. 2) Applied voltage and frequency in accordance with NEMA MG ) Starts based on NEMA three phase design A and design B AC induction motors. 4) External load WK2 is equal to or less than the values listed in NEMA MG ) Applicable to all NEMA (JM, JP, T and TC frame) motors used for products. 6) Applicable to three phase motors only. PAGE 21

22 Motor Data 5 RPM, 6Hz HP Phase Voltage FLA Enclosure Order No. SF Frame Size ½ ¾ 1 1½ /28-2 DP V / /28-2 TEFC V / /1 V4A2E1BBS 1.25 DP V /46 1.5/.75 DPE V4A2E4BB2S / /1 V4A2F2BBS 1.25 TEFC V /46 1.5/.75 TPE V4A2E5BBS / /1.1 XP V4A2EBB1S / / DP V / / TEFC V5A12A2BBS / /1. V5A2F1BBS 1.25 DP V /46 DPE V5A2E4BB2S / /46 V5A2E2BBS 1.25 TEFC V / /1.1 TPE V5A2E5BBS / /1. XP V5A2EBB1S / / DP V /2 12/6 TEFC V6A12B2BBS / /1.8 V6A2E1BBS 1.25 DP V6A2H1BB2S /46 DPE V6A2E4BB2S / /46 V6A2E2BBS 1.25 TEFC V6A2H2BBS /46 2.8/1.4 TPE V6A2F5BBS / /1.8 XP V6A2EBB1S / /7-6.4 DP V / /8.4-8 TEFC V / /2. V7A2E1BB2S 1.15 DP V7A2H1BB2S / /2.1 DPE V7741PE / /2. V7A2E2BB2S 1.15 TEFC V / /2 TPE V7742PE / /2. XP V C PAGE 22

23 Motor Data 5 RPM, 6Hz HP Phase Voltage FLA Enclosure Order No. SF Frame Size 115/ / DP V /28-2 2/ V TEFC V / /2.5 DPE V8A2E4BB2S / /2.9 V8A2E2BB2S 1.15 TEFC V8A2H2BB2S / /2.5 TPE V8A2E5BB2S / /2.7 XP V DP V C 1 115/ /1.8-1 V9A12A2BB2S 1.15 TEFC V9A2H1BB2S / /.7 DPE V9A2F4BB2S / /.8 V9A2E2BB2S 1.15 TEFC 575 V9A2H2BB2S /46 7/.5 TPE V9A2E5BD2S TC 28-2/ /.7 XP V C DP V1721A TEFC V1A12D2BD2S / /5.7 V1A2E1BD2S 1.15 DP V1A2H1BD2S / /5.6 DPE V1741APE / /6 V1A2E2BD2S 1.15 TEFC V1A2H2BD2S / /5.6 TPE V1A2F5BD2S / /6 XP V1A2EBD1S TC 182TC 184TC 7½ DP V TC 2 TEFC * V / /9 V11A2E1BD2S 1.15 DP V11A2H1BB2S / /8.4 DPE V11741APE TC 28-2/ /8.7 V11A2E2BD2S 1.15 TEFC V11A2H2BD2S / /8.9 TPE V11742APE TC 2/ /8.8 XP V1174A TC PAGE 2

24 Motor Data 5 RPM, 6Hz HP Phase Voltage FLA Enclosure Order No. SF Frame Size DP V12A12C1BE2S TEFC * V / /11.6 V12A2E1BE2S 1.15 DP V12A2H1BE2S / /11.5 DPE V12A2E4BE2S / /11.9 V12A2E2BE2S 1.15 TEFC V /46 2.8/11.9 TPE V12A2F5BE2S / /1 XP V /46 9-7/18.5 V1A2E1BE2S 1.15 DP V / /17 DPE V1A2E4BE2S /46 8-5/17.5 V1A2E2BK2S 1.15 TEFC V1A2H2BK2S / /17.2 TPE V1A2E5BK2S / /16.8 XP V1A2EBK2S 1. 2/46 46/2 V14A2F1BK2S 1.15 DP V14A2H1BK2S /46 58/29 DPE V14A2F4BK2S / /2 V TEFC V14A2H2BK2S / /22.5 TPE V14A2E5BK2S / /22.5 XP V TC 21TC 215TC 254TC 256TC / / V15A2E1BK2S 1.15 DP 254TC V15A2H1BK2S /46 58/29 DPE V15A2F4BK2S TC 28-2/ /28.5 V15A2E2BL2S 1.15 TEFC V / /28 TPE V15742PE TC 2/46 57/28.5 XP V /46 7/5 V DP V16A2H1BB2S /46 68/4 DPE V16A2F4BL2S / /4 V TC TEFC V16A2H2BL2S / /4 TPE V16A2E5BL2S TC 28-2/ /5 XP V TC PAGE 24

25 Motor Data 5 RPM, 6Hz HP Phase Voltage FLA Enclosure Order No. SF Frame Size / /48 V DP V17A2H1BL2S /46 9/45 DPE V17A2F4BL2S /46 1-9/45 V17A2E2BL2S 1.15 TEFC V / /44 TPE X17A2F5BM2S /46 1-9/45 XP X17A2FBM2S /46 118/59 V18741S 1.15 DP V18779S /46 11/55 DPE V18741SPE / /56 X18A2E2BM2S 1.15 TEFC V18789S / /54 TPE X18A2E5BM2S /46 112/56 XP X18A2FBM2S / /68 V19741S 1.15 DP V19779S /46 1/65 DPE V19741SPE /46 18/69 X19A2F2BP2S 1.15 TEFC V19789S / /67 TPE X19A2F5BP2S /46 14/67 XP X19A2FBP2S TC 24TSC 24TSC 26TSC 2/46 176/88 V2741S TSC DP V2779S /46 174/87 DPE X2A2F4BP2S / /8 X2A2F2BP2S 1.15 TEFC V2789S /46 TPE X2A2F5BP2S /8 65TSC 2/46 XP X2A2FBP2S 1.15 NOTES: * Standard DP and TE Motors have a 1.15 Service Factor except for 7.5 HP and 1 HP, single-phase, TE Motors which are 1. S.F. EXPLOSION-PROOF (XP) Motors above have a 1.15 Service Factor, min. Class B insulation, and a UL Class 1, Div. 1, Group D rating. For availability consult factory. choice of vendor. PAGE 25

26 Dimensions and Weights 1SV Series 5 RPM 6 Hz 1SV SERIES 6Hz, 5 RPM ODP/TEFC Enclosures PAGE 26 Motor Dimensions (in) Weight (lbs.) All dimensions are in inches (mm). Pump NEMA Frame L2 D1 (max.) Motor Pump/Motor Type HP ODP TEFC ODP TEFC L1 ODP TEFC ODP TEFC L L4 L5 L6 M ODP TEFC ODP TEFC D2 Pump ODP TEFC ODP TEFC ODP TEFC ODP TEFC Stages 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø (Ref.) 1Ø 1Ø Ø Ø Only 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø 1SV SV SV SV SV SV SV SV SV SV SV SV SV SV SV-16 56C SV SV SV SV SV SV SV SV SV SV SV SV SV SV

27 Performance Curve 1SV 5 RPM 6 Hz TOTAL STAGES SV 6Hz 5 RPM MINIMUM FLOW RATE: 2 GPM [½ m /hr] PAGE 27

28 Dimensions and Weights SV Series 5 RPM 6 Hz SV SERIES 6Hz, 5 RPM ODP/TEFC Enclosures PAGE 28 Motor Dimensions (in) Weight (lbs.) All dimensions are in inches (mm). Pump NEMA Frame L2 D1 (max.) Motor Pump/Motor Type HP ODP TEFC ODP TEFC L1 ODP TEFC ODP TEFC L L4 L5 L6 M ODP TEFC ODP TEFC D2 Pump ODP TEFC ODP TEFC ODP TEFC ODP TEFC Stages 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø (Ref.) 1Ø 1Ø Ø Ø Only 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø SV SV SV SV SV SV SV SV-9 56C SV SV SV SV SV SV SV SV SV SV SV SV SV TC 182TC 184TC SV SV SV SV SV SV SV TC 184TC SV

29 Performance Curve SV 5 RPM 6 Hz TOTAL STAGES SV 6Hz 5 RPM MINIMUM FLOW RATE: GPM [.68 m /hr] PAGE 29

30 Dimensions and Weights 5SV Series 5 RPM 6 Hz 5SV SERIES 6Hz, 5 RPM ODP/TEFC Enclosures PAGE Motor Dimensions (in) Weight (lbs.) All dimensions are in inches (mm). Pump NEMA Frame L2 D1 (max.) Motor Pump/Motor Type HP ODP TEFC ODP TEFC L1 ODP TEFC ODP TEFC L L4 L5 L6 M ODP TEFC ODP TEFC D2 Pump ODP TEFC ODP TEFC ODP TEFC ODP TEFC Stages 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø (Ref.) 1Ø 1Ø Ø Ø Only 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø 5SV SV SV SV SV-6 56C SV SV SV SV SV SV SV SV TC 182TC 184TC SV SV SV SV SV SV SV SV TC 184TC SV SV SV SV SV TC 21TC 215TC

31 Performance Curve 5SV 5 RPM 6 Hz TOTAL STAGES SV 6Hz 5 RPM MINIMUM FLOW RATE: 7 GPM [1.6 m /hr] PAGE 1

32 Dimensions and Weights 1SV Series 5 RPM 6 Hz All dimensions are in inches (mm). 1SV SERIES 6Hz, 5 RPM ODP/TEFC Enclosures PAGE 2 Motor Dimensions (in) Weight (lbs.) Pump NEMA Frame L2 D1 (max.) Motor Pump/Motor Type HP ODP TEFC ODP TEFC L1 ODP TEFC ODP TEFC L L4 L5 L6 M ODP TEFC ODP TEFC D2 Pump ODP TEFC ODP TEFC ODP TEFC ODP TEFC Stages 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø (Ref.) 1Ø 1Ø Ø Ø Only 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø 1SV SV C SV SV SV TC 182TC 184TC SV SV TC 1SV TC SV-9 184TC / 21TC* SV SV SV TC 21TC 215TC SV SV SV SV SV TC 254TC SV SV SV TC 256TC * Please refer to motor table for frame size

33 Performance Curve 1SV 5 RPM 6 Hz TOTAL STAGES SV 6Hz 5 RPM MINIMUM FLOW RATE: 9 GPM [2 m /hr] PAGE

34 Dimensions and Weights 15SV Series 5 RPM 6 Hz All dimensions are in inches (mm). 15SV SERIES 6Hz, 5 RPM ODP/TEFC Enclosures Motor Dimensions (in) Weight (lbs.) Pump NEMA Frame L2 D1 (max.) Motor Pump/Motor Type HP ODP TEFC ODP TEFC L1 ODP TEFC ODP TEFC L L4 L5 L6 M ODP TEFC ODP TEFC D2 Pump ODP TEFC ODP TEFC ODP TEFC ODP TEFC Stages 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø (Ref.) 1Ø 1Ø Ø Ø Only 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø 15SV C SV TC 182TC 184TC 15SV SV TC 184TC SV TC TC 215TC SV SV SV TC 254TC SV SV SV TC SV TC 15SV SV TC SV PAGE 4

35 Performance Curve 15SV 5 RPM 6 Hz TOTAL STAGES 15 15SV 6Hz 5 RPM MINIMUM FLOW RATE: 18 GPM [4.1 m /hr] PAGE 5

36 Dimensions and Weights 22SV Series 5 RPM 6 Hz All dimensions are in inches (mm). 22SV SERIES 6Hz, 5 RPM ODP/TEFC Enclosures Motor Dimensions (in) Weight (lbs.) Pump NEMA Frame L2 D1 (max.) Motor Pump/Motor Type HP ODP TEFC ODP TEFC L1 ODP TEFC ODP TEFC L L4 L5 L6 M ODP TEFC ODP TEFC D2 Pump ODP TEFC ODP TEFC ODP TEFC ODP TEFC Stages 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø (Ref.) 1Ø 1Ø Ø Ø Only 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø 22SV-1 56C SV TC 182TC 184TC SV TC 184TC SV TC 21TC 215TC SV SV TC 254TC SV SV TC SV SV-1 254TC SV TC SV PAGE 6

37 Performance Curve 22SV 5 RPM 6 Hz 12 TOTAL STAGES 22SV 6Hz 5 RPM MINIMUM FLOW RATE: 21 GPM [4.8 m /hr] PAGE 7

38 Dimensions and Weights SV Series 5 RPM 6 Hz M REF Ø P REF Ø 5.5 B.C. (19.7) Ø.75 (19) 4 HOLES Ø 5.5 B.C. (19.7) Ø.75 (19) 4 HOLES Ø.6 (15) 4 HOLES 8.66 (22) 6.69 (17) 9.45 (24) (29) VENT 1/2 BSP /8 NPT L2 FILL 1/2 BSP L1 /8 NPT Ø 5.88 B.C. (149.) 7.5 (19.5) Cast Iron 2½" Class 125 F.F. Ø.88 (22) 8 HOLES 4.11 (14.5) 7.5 (19.5) 16SS 2½" Class 15 R.F. Ø 5.88 B.C. (149.) Ø.88 (22) 8 HOLES All dimensions are in inches (mm). 4.1 (15) 1.18 () DRAIN 1/2 BSP 12.6 (2) 4.94 (125.5) 7.5 (19.5) Cast Iron 2½" Class 25 R.F (14.5) 7.5 (19.5) 16SS 2½" Class R.F. SV SERIES 6Hz, 5 RPM ODP/TEFC Enclosures Motor Dimensions (in) Weight (lbs.) Pump NEMA Frame L2 D1 (max.) Motor Pump/Motor Type HP ODP TEFC ODP TEFC L1 ODP TEFC ODP TEFC M ODP TEFC ODP TEFC D2 Pump ODP TEFC ODP TEFC ODP TEFC ODP TEFC Stages 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø (Ref.) 1Ø 1Ø Ø Ø Only 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø SV TC 182TC 184TC SV-2/ TC 184TC SV-2/ TC 21TC 215TC SV SV-/ SV-/ TC 254TC SV SV-4/ SV-4/ TC 256TC SV SV-5/ SV-5/ TC 284TC SV SV-6/ SV-6/ TC SV SV-7/ SV-7/ TC SV TC SV-8/ SV-8/ SV SV-9/ SV-9/ SV TSC 26TSC SV-1/ SV-1/ SV PAGE 8

39 Performance Curve SV 5 RPM 6 Hz Q [m /h] TOTAL DYNAMIC HEAD [FEET] /1 1/2 9 9/1 9/2 8 8/1 8/2 7 7/1 7/2 6 6/1 6/2 5 5/1 5/2 4 4/1 4/2 /1 /2 2 2/1 2/2 1 1/1 TOTAL STAGES/REDUCED STAGES SV 6 Hz 5 RPM TOTAL DYNAMIC HEAD [METERS] 6 8 HP/STAGE NPSHr [FEET] 4 Full Dia Efficiency [%] Reduced Dia Q [US GPM] NPSHr [METERS] EFF [%] MINIMUM FLOW RATE: 5 GPM [8 m /hr] PAGE 9

40 Dimensions and Weights 46SV Series 5 RPM 6 Hz M REF D1 Ø 6. B.C. (152.4) Ø.75 (19) 4 HOLES Ø 6. B.C. (152.4) Ø.75 (19) 4 HOLES 9.45 (24) 7.48 (19) L (29.5) Cast Iron " Class 125 F.F. 5. (127) 8.25 (29.5) 16SS " Class 15 R.F. Ø.6 (15) 4 HOLES (265) (15) VENT 1/2 BSP /8 NPT FILL 1/2 BSP L1 /8 NPT Ø 6.62 B.C. (168.2) Ø.88 (22) 8 HOLES Ø 6.62 B.C. (168.2) Ø.88 (22) 8 HOLES 5.5 (14) 1.77 (45) All dimensions are in inches (mm). DRAIN 1/2 BSP 14.4 (65) 5.69 (144.5) 8.25 (29.5) Cast Iron " Class 25 R.F. 5. (127) 8.25 (29.5) 16SS " Class R.F. 46SV SERIES 6Hz, 5 RPM ODP/TEFC Enclosures Motor Dimensions (in) Weight (lbs.) Pump NEMA Frame L2 D1 (max.) Motor Pump/Motor Type HP ODP TEFC ODP TEFC L1 ODP TEFC ODP TEFC M ODP TEFC ODP TEFC D2 Pump ODP TEFC ODP TEFC ODP TEFC ODP TEFC Stages 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø (Ref.) 1Ø 1Ø Ø Ø Only 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø 46SV TC 215TC SV-2/ SV-2/ TC 254TC SV SV-/ TC 256TC 46SV-/ SV TC 284TC SV-4/ SV-4/ TC 286TC SV SV-5/ SV-5/ TC 286TC 46SV SV-6/ SV-6/ SV SV-7/ SV-7/ TSC 26TSC 46SV SV-8/ SV-8/ SV SV-9/ SV-9/ TSC 65TSC 46SV SV-1/ PAGE 4

41 Performance Curve 46SV 5 RPM 6 Hz Q [m /h] TOTAL STAGES/REDUCED STAGES 1/2 9 9/1 9/2 46SV 6 Hz 5 RPM /1 8/2 TOTAL DYNAMIC HEAD [FEET] /1 7/2 6 6/1 6/2 5 5/1 5/2 4 4/1 4/ TOTAL DYNAMIC HEAD [METERS] /1 /2 2 2/1 2/2 1 1/1 1 5 HP/STAGE Efficiency [%] Full Dia. Reduced Dia EFF [%] NPSHr [FEET] Q [US GPM] NPSHr [METERS] MINIMUM FLOW RATE: 4 GPM [9 m /hr] PAGE 41

42 Dimensions and Weights 66SV Series 5 RPM 6 Hz 9.45 (24) 7.48 (19) 1.4 (265) 12.4 (15) Ø 7.5 B.C. (19.5) Ø.75 (19) 8 HOLES Ø 7.5 B.C. (19.5) Ø.75 (19) 8 HOLES Ø.6 (15) 4 HOLES M REF D1 L2 1. (254) Cast Iron 4" Class 125 F.F (157) 1. (254) 16SS 4" Class 15 R.F. VENT 1/2 BSP FILL 1/2 BSP Ø 7.88 B.C. (2.1) Ø.88 (22) 8 HOLES Ø 7.88 B.C. (2.1) Ø.88 (22) 8 HOLES L1 /8 NPT /8 NPT 5.5 (14) 1.77 (45) DRAIN 1/2 BSP 14.4 (65) All dimensions are in inches (mm) (176.) 1. (254) Cast Iron 4" Class 25 R.F (157) 1. (254) 16SS 4" Class R.F. 66SV SERIES 6Hz, 5 RPM ODP/TEFC Enclosures Motor Dimensions (in) Weight (lbs.) Pump NEMA Frame L2 D1 (max.) Motor Pump/Motor Type HP ODP TEFC ODP TEFC L1 ODP TEFC ODP TEFC M ODP TEFC ODP TEFC D2 Pump ODP TEFC ODP TEFC ODP TEFC ODP TEFC Stages 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø (Ref.) 1Ø 1Ø Ø Ø Only 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø 66SV TC 254TC SV-2/ TC 256TC 66SV-2/ SV TC 284TC SV-/ SV-/ TC 284TC 66SV SV-4/ SV-4/ SV TSC 26TSC SV-5/ SV-5/ TSC 64TSC 66SV SV-6/ SV-6/ TSC 65TSC SV PAGE 42

43 Performance Curve 66SV 5 RPM 6 Hz Q [m /h] 8 6 6/1 6/2 TOTAL STAGES/REDUCED STAGES 66SV 6 Hz 5 RPM /1 5/2 2 TOTAL DYNAMIC HEAD [FEET] /1 4/2 /1 /2 2 2/1 2/ TOTAL DYNAMIC HEAD [METERS] /1 5 HP/STAGE NPSHr [FEET] 14 8 Full Dia Reduced Dia. 6 8 Efficiency [%] Q [US GPM] EFF % NPSHr [METERS] MINIMUM FLOW RATE: 7 GPM [16 m /hr] PAGE 4

44 Dimensions and Weights 92SV Series 5 RPM 6 Hz 9.45 (24) 7.48 (19) Ø 7.5 B.C. (19.5) Ø 7.5 B.C. (19.5) (265) (15) Ø.75 (19) 8 HOLES Ø.75 (19) 8 HOLES Ø.6 (15) 4 HOLES M REF D1 L2 1. (254) Cast Iron 4" Class 125 F.F (157) 1. (254) 16SS 4" Class 15 R.F. VENT 1/2 BSP FILL 1/2 BSP Ø 7.88 B.C. (2.1) Ø.88 (22) 8 HOLES Ø 7.88 B.C. (2.1) Ø.88 (22) 8 HOLES L1 /8 NPT /8 NPT 5.5 (14) 1.77 (45) DRAIN 1/2 BSP 14.4 (65) All dimensions are in inches (mm) (176.) 1. (254) Cast Iron 4" Class 25 R.F (157) 1. (254) 16SS 4" Class R.F. 92SV SERIES 6Hz, 5 RPM ODP/TEFC Enclosures Motor Dimensions (in) Weight (lbs.) Pump NEMA Frame L2 D1 (max.) Motor Pump/Motor Type HP ODP TEFC ODP TEFC L1 ODP TEFC ODP TEFC M ODP TEFC ODP TEFC D2 Pump ODP TEFC ODP TEFC ODP TEFC ODP TEFC Stages 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø (Ref.) 1Ø 1Ø Ø Ø Only 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø 92SV TC 254TC SV-2/ TC 284TC SV-2/ TC 284TC 92SV SV-/ TC 284TC 92SV-/ SV TSC 26TSC SV-4/ SV-4/ TSC 64TSC SV SV-5/ TSC 65TSC 92SV-5/ PAGE 44

45 Performance Curve 92SV 5 RPM 6 Hz Q [m /h] 7 5/1 5/2 TOTAL STAGES/REDUCED STAGES 92SV 6 Hz 5 RPM 22 2 TOTAL DYNAMIC HEAD [FEET] /1 4/2 /1 /2 2 2/1 2/ TOTAL DYNAMIC HEAD [METERS] 2 1 1/ HP/STAGE NPSHr [FEET] Full Dia Reduced Dia Efficiency [%] Q [US GPM] EFF % NPSHr [METERS] MINIMUM FLOW RATE: 1 GPM [2 m /hr] PAGE 45

46 Dimensions and Weights 125SV Series 5 RPM 6 Hz Ø.75 (19) 4 HOLES M REF 1. () 1.87 (275) D (8) (45) 8.5 B.C. (216) Ø.88 (22) 8 HOLES 8.5 B.C. (216) Ø.88 (22) 8 HOLES L2 1. (254) Cast Iron 5" Class 125 F.F (164) 1. (254) 16SS 5" Class 15 R.F. VENT 1/2 BSP FILL 1/2 BSP 9.25 B.C. (25) Ø.88 (22) 8 HOLES 9.25 B.C. (25) Ø.88 (22) 8 HOLES L1 /8 NPT /8 NPT 6. (16) 1.77 (45) DRAIN 1/2 BSP 18.9 (48) 8.1(211) 11. (28) Cast Iron 5" Class 25 R.F. 7. (178) 11. (28) 16SS 5" Class R.F. All dimensions are in inches (mm). 125SV SERIES 6Hz, 5 RPM ODP/TEFC Enclosures Motor Dimensions (in) Weight (lbs.) NEMA Frame L2 D1 (max.) Motor Pump/Motor Pump HP ODP TEFC ODP TEFC L1 ODP TEFC ODP TEFC L L4 L5 L6 M ODP TEFC ODP TEFC D2 Pump ODP TEFC ODP TEFC ODP TEFC ODP TEFC Type 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø (Ref.) 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø 125SV-1/C TC 254TC SV-2/C TC 286TC SV-/A TC 286TC SV-4/B TSC 26TSC SV-5/5B TSC 26TSC SV-5/C TSC 65TSC PAGE 46

47 Performance Curve 125SV 5 RPM 6 Hz 5/C 125SV 6Hz 5 RPM 5/5B 4/B /A 2/C 1/C MINIMUM FLOW RATE: 1 GPM [2 m /hr] PAGE 47

48 Dimensions and Weights 1SV Series 175 RPM 6 Hz 1SV SERIES 6Hz, 175 RPM ODP/TEFC Enclosures PAGE 48 Motor Dimensions (in) Weight (lbs.) All dimensions are in inches (mm). Pump NEMA Frame L2 D1 (max.) Motor Pump/Motor Type HP ODP TEFC ODP TEFC L1 ODP TEFC ODP TEFC L L4 L5 L6 M ODP TEFC ODP TEFC D2 Pump ODP TEFC ODP TEFC ODP TEFC ODP TEFC Stages 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø (Ref.) 1Ø 1Ø Ø Ø Only 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø 1SV SV SV SV SV SV SV SV SV SV SV SV SV SV SV C SV SV SV SV SV SV SV SV SV SV SV SV SV SV

49 Performance Curve 1SV 175 RPM 6 Hz TOTAL STAGES SV 6Hz 175 RPM MINIMUM FLOW RATE: 1 GPM [.24 m /hr] PAGE 49

50 Dimensions and Weights SV Series 175 RPM 6 Hz SV SERIES 6Hz, 175 RPM ODP/TEFC Enclosures PAGE 5 Motor Dimensions (in) Weight (lbs.) All dimensions are in inches (mm). Pump NEMA Frame L2 D1 (max.) Motor Pump/Motor Type HP ODP TEFC ODP TEFC L1 ODP TEFC ODP TEFC L L4 L5 L6 M ODP TEFC ODP TEFC D2 Pump ODP TEFC ODP TEFC ODP TEFC ODP TEFC Stages 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø (Ref.) 1Ø 1Ø Ø Ø Only 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø SV SV SV SV SV SV SV SV SV SV SV SV SV SV SV-16 56C SV SV SV SV SV SV SV SV SV SV SV SV SV SV

51 Performance Curve SV 175 RPM 6 Hz TOTAL STAGES SV 6Hz 175 RPM MINIMUM FLOW RATE: 1 GPM [.24 m /hr] PAGE 51

52 Dimensions and Weights 5SV Series 175 RPM 6 Hz All dimensions are in inches (mm). 5SV SERIES 6Hz, 175 RPM ODP/TEFC Enclosures Motor Dimensions (in) Weight (lbs.) Pump NEMA Frame L2 D1 (max.) Motor Pump/Motor Type HP ODP TEFC ODP TEFC L1 ODP TEFC ODP TEFC L L4 L5 L6 M ODP TEFC ODP TEFC D2 Pump ODP TEFC ODP TEFC ODP TEFC ODP TEFC Stages 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø (Ref.) 1Ø 1Ø Ø Ø Only 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø 5SV SV SV SV SV SV SV SV SV SV SV SV SV C 5SV SV SV SV SV SV SV SV SV SV SV SV SV PAGE 52

53 Performance Curve 5SV 175 RPM 6 Hz 27 TOTAL STAGES 5SV 6Hz RPM MINIMUM FLOW RATE: GPM [.7 m /hr] PAGE 5

54 Dimensions and Weights 1SV Series 175 RPM 6 Hz All dimensions are in inches (mm). 1SV SERIES 6Hz, 175 RPM ODP/TEFC Enclosures Motor Dimensions (in) Weight (lbs.) Pump NEMA Frame L2 D1 (max.) Motor Pump/Motor Type HP ODP TEFC ODP TEFC L1 ODP TEFC ODP TEFC L L4 L5 L6 M ODP TEFC ODP TEFC D2 Pump ODP TEFC ODP TEFC ODP TEFC ODP TEFC Stages 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø (Ref.) 1Ø 1Ø Ø Ø Only 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø 1SV SV SV SV SV SV SV SV SV SV C 1SV SV SV SV SV SV SV SV SV SV PAGE 54

55 Performance Curve 1SV 175 RPM 6 Hz 2 TOTAL STAGES 1SV 6Hz 175 RPM MINIMUM FLOW RATE: 5 GPM [1.4 m /hr] PAGE 55

56 Dimensions and Weights 15SV Series 175 RPM 6 Hz All dimensions are in inches (mm). 15SV SERIES 6Hz, 175 RPM ODP/TEFC Enclosures Motor Dimensions (in) Weight (lbs.) Pump NEMA Frame L2 D1 (max.) Motor Pump/Motor Type HP ODP TEFC ODP TEFC L1 ODP TEFC ODP TEFC L L4 L5 L6 M ODP TEFC ODP TEFC D2 Pump ODP TEFC ODP TEFC ODP TEFC ODP TEFC Stages 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø (Ref.) 1Ø 1Ø Ø Ø Only 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø 15SV SV SV SV SV SV SV C 15SV SV SV SV SV SV SV SV TC 182TC 184TC PAGE 56

57 Performance Curve 15SV 175 RPM 6 Hz TOTAL STAGES 15SV 6Hz 175 RPM MINIMUM FLOW RATE: 8 GPM [2 m /hr] PAGE 57

58 Dimensions and Weights 22SV Series 175 RPM 6 Hz All dimensions are in inches (mm). 22SV SERIES 6Hz, 175 RPM ODP/TEFC Enclosures Motor Dimensions (in) Weight (lbs.) Pump NEMA Frame L2 D1 (max.) Motor Pump/Motor Type HP ODP TEFC ODP TEFC L1 ODP TEFC ODP TEFC L L4 L5 L6 M ODP TEFC ODP TEFC D2 Pump ODP TEFC ODP TEFC ODP TEFC ODP TEFC Stages 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø (Ref.) 1Ø 1Ø Ø Ø Only 1Ø 1Ø Ø Ø 1Ø 1Ø Ø Ø 22SV SV SV SV SV SV C SV SV SV SV SV SV TC 182TC 184TC PAGE 58

59 Performance Curve 22SV 175 RPM 6 Hz TOTAL STAGES 12 22SV 6Hz 175 RPM MINIMUM FLOW RATE: 11 GPM [2.5 m /hr] PAGE 59