THAT S WHAT WE CALL HEAVY LIFTING!

Transcription

1 THAT S WHAT WE CALL HEAVY LIFTING!

2 Enerpac High-Tonnage s HCL-2006, LPL-602, HCR-2006 Highest Level of Durability Reaching the Summit Edition: Substrate bonded multi-layer treatment Hardened surface resists side-loading and cyclic wear Weather protected, inside and out Low friction to easily spin the load locking rings 1) Enclosed polymer bearing system pper and lower bearings enclose the cylinder plunger for support and are able to be replaced along with seals and other soft parts State-of-the-art bearing material provides maximum conformity to reduce wear and avoid bore damage even in high side-load conditions Low-wear, high-pressure seals Improved geometry and material selection increases seal performance even in harsh conditions Low friction improves retraction times The Summit Edition Innovation is at the heart of the new Summit Edition of cylinders, delivering the high quality construction that you expect Enerpac. The durability ensures your job gets done safely and reliably. support bearing adds support for eccentric loads 2) Nitrocarburization surface treatment for improved wear resistance and corrosion protection Replaceable composite bearings surround the seal providing support for eccentric loads Low wear, high pressure seals provide longer service life 2) Eccentric load (or side-load ) is inevitable in heavy lifting. Our unique Summit Edition features provide the ultimate protection against side-load. Increased bearing surface maintains stability, and nitrocarburization treatment prevents scoring on the inside of the cylinder. Side-load poses a real problem... our new cylinder features are the solution! Bridge lifting and launching system. The load is balanced on groups of lock nut cylinders. The hydraulic movements are synchronized using the Enerpac PLC-controlled synchronous lift systems. Versatile Over 200 models in four configurations 1) Certified lifting eyes, base mounting holes and collar threads are included for secure handling and cylinder mounting 1) 1) See specific models technical data for more information. 2

3 Enerpac High-Tonnage s High-Tonnage s The Enerpac High-Tonnage s are particularly suitable for (multipoint) lifting applications. In combination with our state-of-theart power packs, you will have a world class hydraulic system to perform the most challenging lifting jobs in a safe and professional manner. See the back page for more information on our pump offering. HCG, HCR, HCL-Series s ton lifting capacity - inch lifting stroke HCG-Series - single acting gravity-return stop-ring to prevent plunger blow-out 10% side-load resistance over full stroke HCR-Series - double acting hydraulic advance and retract for controlled movement 10% side-load resistance over full stroke HCL-Series - lock nut, single acting gravity-return lock nut for mechanical load holding overflow port to prevent plunger blow out 10% side-load resistance over full stroke LPL-Series - lock nut, low height, single acting ton lifting capacity inch lifting stroke integrated tilt saddle gravity-return lock nut for mechanical load holding 10% side-load resistance over full stroke HCG HCR HCL LPL Series : ton Stroke: inch. Maximum Operating Pressure: Certified lifting eyes Overflow plug prevents plunger blow-out (HCL, LPL) Safety valve prevents over-pressurization (HCR) Interchangeable saddle prevents plunger damage. Integrated Tilt allows for up to 5 degree misalignment (LPL) Lock nut provides safe mechanical load holding (HCL, LPL) Low friction wiper protects against contamination (HCG, HCR) Full load stop-ring (HCG, HCR) Collar threads for versatile cylinder mounting (HCG, HCR) 4 Assisted Return Pumps Enerpac HCG, HCL and LPL- Series cylinders are hydraulic advance and gravity-return. To improve productivity and plunger retraction Enerpac offers assisted return on Z4 and ZE-Series pumps featuring Enerpac Venturi valve technology, specifically to facilitate the faster return of single-acting, gravityreturn cylinders. See enerpac.com for details. Split-Flow Pumps SFP-Series pumps with multiple outlets with equal oil flow. For lifting and lowering applications on multiple points these pumps are a far better alternative than using separately operated pumps. Nitrocarburization surface on base, plunger, stop-ring and lock nut 20 Replaceable composite plunger support bearings Low-wear, high-pressure seals provide longer service life High-flow couplers for fast advance and retract Synchronous Lifting Systems Pumps for multiple lift-point capabilities. The economical EVOB-Series for basic applications and the multifunctional EVO-Series lifting system. Base mounting holes for versatile mounting (except LPL) 20

4 HCG-502 HCG-504 HCG-506 HCG-508 HCG-5010 HCG-5012 HCG-1002 HCG-1004 HCG-1006 HCG-1008 HCG HCG HCG-1502 HCG-1504 HCG-1506 HCG-1508 HCG HCG HCG-2002 HCG-2004 HCG-2006 HCG-2008 HCG HCG HCG-2502 HCG-2504 HCG-2506 HCG-2508 HCG HCG HCG-002 HCG-004 HCG-006 HCG-008 HCG-0010 HCG-0012 HCL-502 HCL-504 HCL-506 HCL-508 HCL-5010 HCL-5012 HCL-1002 HCL-1004 HCL-1006 HCL-1008 HCL HCL HCL-1502 HCL-1504 HCL-1506 HCL-1508 HCL HCL HCL-2002 HCL-2004 HCL-2006 HCL-2008 HCL HCL HCL-2502 HCL-2504 HCL-2506 HCL-2508 HCL HCL HCL-002 HCL-004 HCL-006 HCL-008 HCL-0010 HCL-0012 HCR-502 HCR-504 HCR-506 HCR-508 HCR-5010 HCR-5012 HCR-1002 HCR-1004 HCR-1006 HCR-1008 HCR HCR HCR-1502 HCR-1504 HCR-1506 HCR-1508 HCR HCR HCR-2002 HCR-2004 HCR-2006 HCR-2008 HCR HCR HCR-2502 HCR-2504 HCR-2506 HCR-2508 HCR HCR HCR-002 HCR-004 HCR-006 HCR-008 HCR-0010 HCR Single-Acting Single-Acting With Lock Nut Double-Acting QICK SELECTION Stroke Maximum at HCG-Series HCL-Series HCR-Series Enerpac High-Tonnage s

5 HCG-4002 HCG-4004 HCG-4006 HCG-4008 HCG HCG HCG-5002 HCG-5004 HCG-5006 HCG-5008 HCG HCG HCG-6002 HCG-6004 HCG-6006 HCG-6008 HCG HCG HCG-8002 HCG-8004 HCG-8006 HCG-8008 HCG HCG HCG HCG HCG HCG HCG HCG HCL-4002 HCL-4004 HCL-4006 HCL-4008 HCL HCL HCL-5002 HCL-5004 HCL-5006 HCL-5008 HCL HCL HCL-6002 HCL-6004 HCL-6006 HCL-6008 HCL HCL HCL-8002 HCL-8004 HCL-8006 HCL-8008 HCL HCL HCL HCL HCL HCL HCL HCL HCR-4002 HCR-4004 HCR-4006 HCR-4008 HCR HCR HCR-5002 HCR-5004 HCR-5006 HCR-5008 HCR HCR HCR-6002 HCR-6004 HCR-6006 HCR-6008 HCR HCR HCR-8002 HCR-8004 HCR-8006 HCR-8008 HCR HCR HCR HCR HCR HCR HCR HCR Single-Acting Single-Acting With Lock Nut Double-Acting QICK SELECTION Stroke Maximum at HCG-Series HCL-Series HCR-Series HCG HCR HCL Series : ton Stroke: - inch Maximum Operating Pressure: Enerpac High-Tonnage s

6 HCG-Series, High-Tonnage s X W HCG-Series, Single-Acting, Gravity-Return s Hardened surface resists side-loading and cyclic wear 10% side-load resistance over full stroke Stop-ring to prevent plunger blow-out Weather protected, inside and out pper and lower replaceable bearings enclose the cylinder plunger for support throughout the stroke Certified lifting eyes, base mounting holes and collar threads SELECTION CHART TON HCG-MODELS For ton models, see pages 8-9. For full product features see pages 2-. Collar / HCG-50 HCG-100 HCG-150 HCG-200 HCG-250 HCG-00 / HCG-50 HCG-100 HCG-150 HCG-200 HCG-250 HCG-00 Size W M10 x 2 M175 x M215 x M250 x M280 x M05 x Base Mounting Holes Bolt Circle Length X Size V M12 x 1,75 M12 x 1,75 M12 x 1,75 M12 x 1,75 M12 x 1,75 M16 x 2 HCG ton HCG ton The collar thread length is designed for the full rated cylinder capacity. Minimum Depth Z 0.98 of Holes Angle Coupler Stroke * Maximum at Efective Area Oil (in 2 ) (in ) HCG-502 HCG HCG HCG HCG-5010 HCG-5012 HCG-1002 HCG HCG HCG HCG HCG HCG-1502 HCG HCG HCG HCG HCG HCG-2002 HCG HCG HCG HCG HCG HCG-2502 HCG HCG HCG HCG HCG HCG-002 HCG HCG HCG HCG-0010 HCG * and 2000-ton models and additional stroke lengths available on request. A

7 Single-Acting, High-Tonnage s : ton Stroke: - inch Maximum Operating Pressure: HCG Series CATG-Series Tilt Extended B Outside D Bore E F Base to Advance Port H Standard J Protrusion K Wt. (lbs) * HCG-502 HCG-504 HCG-506 HCG-508 HCG-5010 HCG-5012 HCG-1002 HCG-1004 HCG-1006 HCG-1008 HCG HCG HCG-1502 HCG-1504 HCG-1506 HCG-1508 HCG HCG HCG-2002 HCG-2004 HCG-2006 HCG-2008 HCG HCG HCG-2502 HCG-2504 HCG-2506 HCG-2508 HCG HCG HCG-002 HCG-004 HCG-006 HCG-008 HCG-0010 HCG-0012 Optional Tilt J1 K CATG-50 CATG-100 CATG-150 CATG-200 CATG-250 CATG-00 7

8 HCG-Series, High-Tonnage s HCG-Series, Single-Acting, Gravity-Return s Hardened surface resists side-loading and cyclic wear 10% side-load resistance over full stroke Stop-ring to prevent plunger blow-out Weather protected, inside and out pper and lower replaceable bearings enclose the cylinder plunger for support throughout the stroke Certified lifting eyes, base mounting holes and collar threads W X Collar / HCG-400 HCG-500 HCG-600 HCG-800 HCG-1000 / HCG-400 HCG-500 HCG-600 HCG-800 HCG-1000 Size W M50 x M400 x 4 M40 x 4 M505 x 5 M570 x 5 Base Mounting Holes Bolt Circle Length X Size V M16 x 2 M24 x M24 x M24 x M24 x The collar thread length is designed for the full rated cylinder capacity. Minimum Depth Z 0.98 of Holes Angle Coupler SELECTION CHART TON HCG-MODELS For ton models, see pages 6-7. For full product features see pages 2-. Stroke * Maximum at Efective Area Oil (in 2 ) (in ) HCG-4002 HCG HCG HCG HCG HCG HCG-5002 HCG , HCG HCG HCG HCG HCG-6002 HCG , , HCG HCG ,04.87 HCG HCG HCG-8002 HCG , , HCG , HCG , HCG HCG HCG HCG , , HCG , HCG , HCG HCG , ,78.65 * and 2000-ton models and additional stroke lengths available on request. A

9 Single-Acting, High-Tonnage s HCG Series Offshore wind turbine leveling: Enerpac's synchronous lifting system was the solution for leveling support cross pieces on 80 wind turbines. : ton Stroke: - inch Maximum Operating Pressure: CATG-Series Tilt Extended B Outside Bore Base to Advance Port Standard Protrusion K Wt. * HCG-4002 HCG-4004 HCG-4006 HCG-4008 HCG HCG HCG-5002 HCG-5004 HCG-5006 HCG-5008 HCG HCG HCG-6002 HCG-6004 HCG-6006 HCG-6008 HCG HCG HCG-8002 HCG-8004 HCG-8006 HCG-8008 HCG HCG HCG HCG HCG HCG HCG HCG Optional Tilt D E F H J (lbs) J1 K ,056 1, ,06 1, ,29 1,40 1,6 1, ,621 1, ,905 2,047 1,852 2, ,188 2, ,52 2, CATG-400 CATG-500 CATG-600 CATG-800 CATG

10 HCR-Series, High-Tonnage s I W X HCR-Series, Double-Acting s Fast advance and retract 10% side-load resistance over full stroke Hardened surface resists side-loading and cyclic wear Weather protected, inside and out pper and lower replaceable bearings enclose the cylinder plunger for support throughout the stroke Certified lifting eyes, base mounting holes and collar threads Collar / HCR-50 HCR-100 HCR-150 HCR-200 HCR-250 HCR-00 / HCR-50 HCR-100 HCR-150 HCR-200 HCR-250 HCR-00 Size W M10 x 2 M175 x M215 x M250 x M280 x M05 x Base Mounting Holes Bolt Circle Length X Size V M12 x 1,75 M12 x 1,75 M12 x 1,75 M12 x 1,75 M12 x 1,75 M16 x 2 HCR ton HCR ton The collar thread length is designed for the full rated cylinder capacity. Minimum Depth Z 0.98 No. of Holes Angle Coupler SELECTION CHART AND DETAILS OF TON HCR-MODELS For ton models, see pages For full product features see pages 2- Stroke * Maximum at Efective Area Oil (in 2 ) (in ) HCR-502 HCR HCR HCR HCR-5010 HCR-5012 HCR-1002 HCR HCR HCR HCR HCR HCR-1502 HCR HCR HCR HCR HCR HCR-2002 HCR HCR HCR HCR HCR HCR-2502 HCR HCR HCR HCR HCR HCR-002 HCR HCR HCR HCR-0010 HCR * and 2000-ton models and additional stroke lengths available on request. A

11 Double-Acting, High-Tonnage s : ton Stroke: - inch Maximum Operating Pressure: HCR Series CATG-Series Tilt Extended B Outside D Bore E F Base to Advance Port H Top to Retract Port I Standard J Protrusion K Wt. (lbs) * HCR-502 HCR-504 HCR-506 HCR-508 HCR-5010 HCR-5012 HCR-1002 HCR-1004 HCR-1006 HCR-1008 HCR HCR HCR-1502 HCR-1504 HCR-1506 HCR-1508 HCR HCR HCR-2002 HCR-2004 HCR-2006 HCR-2008 HCR HCR HCR-2502 HCR-2504 HCR-2506 HCR-2508 HCR HCR HCR-002 HCR-004 HCR-006 HCR-008 HCR-0010 HCR-0012 Optional Tilt J1 K CATG-50 CATG-100 CATG-150 CATG-200 CATG-250 CATG-00 11

12 HCR-Series, High-Tonnage s HCR-Series, Double-Acting s Fast advance and retract 10% side-load resistance over full stroke Hardened surface resists side-loading and cyclic wear Weather protected, inside and out pper and lower replaceable bearings enclose the cylinder plunger for support throughout the stroke Certified lifting eyes, base mounting holes and collar threads W I X SELECTION CHART AND DETAILS OF TON HCR-MODELS For ton models, see pages For full product features see pages 2-. Collar / HCR-400 HCR-500 HCR-600 HCR-800 HCR-1000 / HCR-400 HCR-500 HCR-600 HCR-800 HCR-1000 Size W M50 x M400 x 4 M40 x 4 M505 x 5 M570 x 5 Base Mounting Holes Bolt Circle Length X Size V M16 x 2 M24 x M24 x M24 x M24 x The collar thread length is designed for the full rated cylinder capacity. Min. Depth Z 0.98 of Holes Angle Coupler Stroke * Maximum at Efective Area Oil (in 2 ) (in ) HCR-4002 HCR HCR HCR HCR HCR HCR-5002 HCR , HCR HCR HCR HCR HCR-6002 HCR , , HCR HCR ,04.87 HCR HCR HCR-8002 HCR , , HCR , HCR , HCR HCR HCR HCR , , HCR , HCR , HCR HCR , ,78.65 * and 2000-ton models and additional stroke lengths available on request. A

13 Double-Acting, High-Tonnage s HCR Series The superlifting and launch of a ton floating oil production system in Malaysia for the Gumusut-Kakap offshore field has set high benchmarks for safety through its use of sophisticated EVO-Series synchronous hydraulics to lift, balance, weigh and smoothly launch massive resources structures. : ton Stroke: - inch Maximum Operating Pressure: CATG-Series Tilt Extended B Outside Bore Base to Advance Port Top to Retract Port Standard Protrusion K Wt. * HCR-4002 HCR-4004 HCR-4006 HCR-4008 HCR HCR HCR-5002 HCR-5004 HCR-5006 HCR-5008 HCR HCR HCR-6002 HCR-6004 HCR-6006 HCR-6008 HCR HCR HCR-8002 HCR-8004 HCR-8006 HCR-8008 HCR HCR HCR HCR HCR HCR HCR HCR Optional Tilt D E F H I J (lbs) J1 K ,067 1, ,044 1, ,252 1,56 1,40 1, ,61 1, ,922 2,068 1,858 2, ,205 2, ,552 2, CATG-400 CATG-500 CATG-600 CATG-800 CATG

14 HCL-Series, Lock Nut s HCL-Series, Single-Acting, Gravity-Return s Lock nut provides positive and safe mechanical load holding Low friction to easily spin the load locking rings 10% side-load resistance over full stroke Hardened surface resists side-loading and cyclic wear Overflow port as stroke limiter to prevent plunger blow-out Weather protected, inside and out Replaceable bearings enclose the plunger for support throughout the stroke Certified lifting eyes and base mounting holes SELECTION CHART TON HCL-MODELS For ton models, see pages For full product features see pages 2-. S Base Mounting Holes / HCL-50 HCL-100 HCL-150 HCL-200 HCL-250 HCL-00 Bolt Circle Size V M8X1.25 M12X1.75 M12X1.75 M12X1.75 M12X1.75 M16X2 HCL ton HCL ton Minimum Depth Z of Holes Angle Coupler Stroke * Maximum at Efective Area Oil (in 2 ) (in ) HCL-502 HCL HCL HCL HCL-5010 HCL-5012 HCL-1002 HCL HCL HCL HCL HCL HCL-1502 HCL HCL HCL HCL HCL HCL-2002 HCL HCL HCL HCL HCL HCL-2502 HCL HCL HCL HCL HCL HCL-002 HCL HCL HCL HCL-0010 HCL * and 2000-ton models and additional stroke lengths available on request. A

15 Single-Acting, High-Tonnage Lock Nut s : ton Stroke: - inch Maximum Operating Pressure: HCL Series Extended B Outside Bore Base to Advance Port Standard Protrusion K Lock Nut Wt. * HCL-502 HCL-504 HCL-506 HCL-508 HCL-5010 HCL-5012 HCL-1002 HCL-1004 HCL-1006 HCL-1008 HCL HCL HCL-1502 HCL-1504 HCL-1506 HCL-1508 HCL HCL HCL-2002 HCL-2004 HCL-2006 HCL-2008 HCL HCL HCL-2502 HCL-2504 HCL-2506 HCL-2508 HCL HCL HCL-002 HCL-004 HCL-006 HCL-008 HCL-0010 HCL-0012 CAT-Series Tilt Optional Tilt D E F H J S J1 K1 (lbs) Tr 100 x CAT Tr 15 x CAT Tr 165 x CAT Tr 190 x CAT Tr 215 x CAT Tr 25 x CAT

16 HCL-Series, Lock Nut s HCL-Series, Single-Acting, Gravity-Return s Lock nut provides positive and safe mechanical load holding Low friction to easily spin the load locking rings 10% side-load resistance over full stroke Hardened surface resists side-loading and cyclic wear Overflow port as stroke limiter to prevent plunger blow-out Weather protected, inside and out Replaceable bearings enclose the plunger for support throughout the stroke Certified lifting eyes and base mounting holes SELECTION CHART TON HCL-MODELS For ton models, see pages For full product features see pages 2- S Base Mounting Holes / HCL-400 HCL-500 HCL-600 HCL-800 HCL-1000 Bolt Circle Size V M16 x 2 M24 x M24 x M24 x M24 x Minimum Depth Z 0.95 of Holes Angle Coupler Stroke * Maximum at Efective Area Oil (in 2 ) (in ) HCL-4002 HCL HCL HCL HCL HCL HCL-5002 HCL , HCL HCL HCL HCL HCL-6002 HCL , , HCL HCL ,04.87 HCL HCL HCL-8002 HCL , , HCL , HCL , HCL HCL HCL HCL , , HCL , HCL , HCL HCL , ,78.65 * and 2000-ton models and additional stroke lengths available on request. A

17 Single-Acting, High-Tonnage Lock Nut s HCL Series Heavy lifting and foundation levelling. The lock nut provides mechanical load holding over a long period of time. : ton Stroke: - inch Maximum Operating Pressure: CAT-Series Tilt Extended B Outside Bore Base to Advance Port Standard Protrusion K Lock Nut * HCL-4002 HCL-4004 HCL-4006 HCL-4008 HCL HCL HCL-5002 HCL-5004 HCL-5006 Optional Tilt Tr 05 x ,077 1,186 1, ,067 HCL-5008 HCL HCL HCL-6002 HCL Tr 0 x ,19 HCL ,19 HCL ,444 1,570 1,472 1,646 HCL HCL HCL-8002 HCL Tr 85 x ,819 HCL ,992 HCL ,166 2,9 2,115 2,5 HCL HCL HCL HCL Tr 440 x ,556 HCL ,777 HCL ,998,219 HCL HCL Wt. D E F H J S (lbs) J1 K Tr 270 x CAT-400 CAT-500 CAT-600 CAT-800 CAT

18 LPL-Series, Low-height Lock Nut s LPL-Series, Low-height Lock Nut s The Lowest Power Lifter Integrated Tilt s All LPL-Series cylinders include integral tilt saddles with maximum tilt angles up to 5. The Summit Edition Innovation is at the heart of the new Summit Edition cylinders, delivering the high-quality construction that you expect Enerpac. Their durability ensures your job is done safely and reliably. Lock nut provides mechanical load holding for a safe work environment Integrated tilt saddle allows for up to 5 degrees of misalignment Extreme low-height for use in confined areas 10% side-load resistance over full stroke Overflow port as stroke limiter to prevent plunger blow-out Single-acting, gravity-return Only the extreme low-height LPL-cylinder fits in this confined area to lift the construction. The lock nut provides positive and safe mechanical load holding over a long period of time. Replaceable plunger support bearing adds support for eccentric loads * Nitrocarburization surface treatment for improved load and wear resistance and corrosion protection Replaceable composite bearing surrounds the seal, providing support for eccentric loads Low-wear, high-pressure seals provide longer service life. * Eccentric load (or side-load ) is inevitable in heavy lifting. Enerpac's unique Summit Edition features provide the ultimate protection against side load. Increased bearing surface maintains stability, and nitrocarburization treatment prevents scoring on the inside of the cylinder. Side-load poses a real problem... our new cylinder features are the solution! Stroke Maximum at Effective Area (in 2 ) LPL-602 LPL-1002 LPL-1602 LPL-2002 LPL-2502 LPL-4002 LPL

19 Single-Acting, Low-height Lock Nut s IMPORTANT! All LPL-Series cylinders require a solid lifting surface for correct support. The use of these cylinders on surfaces such as sand, mud or dirt, may result in cylinder damage. LPL Series INCORRECT! Rough soil CORRECT! Flat lifting surface : ton Stroke: inch Maximum Operating Pressure: For more safety instructions see our Learning Center on Longer Stroke Lock Nut s For longer stroke applications HCL-Series lock nut cylinders are the perfect choice. 4 Split-Flow Pumps 90 R SFP-Series pumps with multiple outlets with equal oil flow. For lifting and lowering applications on multiple points these pumps are a far better alternative than using separately operated pumps. H S F J E D K A B Synchronous Lifting Systems Pumps for multiple lift-point capabilities. The economical EVOB-Series for basic applications and the multifunctional EVO-Series lifting system Oil (in ) A Extended B Outside D Bore E F Base to Advance Port H J Protrusion K Max. Tilt Angle R (degrees) Lock Nut S Wt. (lbs) Tr 105 x 4 Tr 15 x 6 Tr 170 x 6 Tr 190 x 6 Tr 215 x 6 Tr 270 x 6 Tr 05 x LPL-602 LPL-1002 LPL-1602 LPL-2002 LPL-2502 LPL-4002 LPL

20 Heavy Lifting Powered by Enerpac Controlled Hydraulic Movement At Enerpac, we specialize in designing high-pressure hydraulic systems required for the controlled movement of large, heavy structures. Powerpacks for lifting applications Around the world, construction experts consult with Enerpac to develop integrated hydraulic solutions for the relocation, positioning, raising and lowering of structures such as bridges, tunnels, buildings, ship modules and platforms. Together, with your engineers and our hydraulic experience, we can develop the innovative solutions you need for the controlled hydraulic movement of those large, heavy burdens. Heavy Lifting Technology Synchronous Lifting Systems Jack-p Systems Bridge Launching Systems Synchronous Hoisting Systems Telescopic Hydraulic Gantries Heavy-Lifting Strand Jacks Skidding Systems Self-Erecting Towers Chain Pulling Systems Self-Propelled Modular Transporter SFP-Series Split-flow pumps distribute an equal amount of hydraulic oil to a maximum of six outlets. Smart-valve technology allows controlled lifting and lowering of heavy loads. Assisted Return Pumps To improve productivity and plunger retraction, Enerpac offers assisted return on Z4 and ZE-Series pumps featuring Enerpac Venturi valve technology, specifically to facilitate the faster return of single-acting, gravity-return cylinders. See enerpac.com for details. EVOB-Series Basic PLC-controlled lifting systems using stroke sensors signals for synchronized lifting and lowering of multiple lifting points. Depending on model, this pump can control 4 or 8 lifting points. EVO-Series Multifunctional PLC-controlled lifting systems for up to 12 lifting points. Modular network capability between units to synchronize up to 48 points. Smart-pump technology in combination with stroke and load monitoring per lifting point, provides high accuracy for lifting and lowering applications. Optional: Weighing and center of gravity determination. Enerpac Worldwide Locations For a complete list of addresses see: About Enerpac Enerpac is the leading global provider of high-pressure hydraulic tools and solutions with a broad range of products, local expertise and worldwide distribution network. With a proven track record in a wide range of markets, Enerpac designs and manufactures high-quality tools and solutions for all industrial applications. Enerpac has gained unique experience in delivering hydraulic solutions for the controlled movement and positioning of heavy objects. Enerpac supports your business by offering the right solutions and service to help you get your work done efficiently and safely. Your Enerpac Distributor: 714_ _EN-S 2017 Enerpac - Subject to change without notice.