GENERAL ELECTRIC FAN COIL UNITS

Size: px

Start display at page:

Download "GENERAL ELECTRIC FAN COIL UNITS"

Reynold Butler
5 years ago
Views:

1 GENERAL ELECTRIC FAN COIL S Chilled Water System CFM thru CFM GE_AWHE_series.indd 3/6/ 3:3 PM

2 GE_AWHE_series.indd 3/6/ 3:3 PM

water curves & sound power data - Chilled

connection dimensions -3 Valve packages 3

3 CONTENTS Outstanding features 4 Model decoding 5 A pplications 5 Physical data 6 Fan performance data 6-7 Heating capacities -9 Cooling water pressure water curves & sound power data - Chilled water cooling capacities -5 Correction factors 6 Typical schematic wiring diagram 7- Unit dimensions 9- Coil connection dimensions -3 Valve packages 3 Continuing research results in steady improvements. Therefore, these specifications are subject to change without notice 3 GE_AWHE_series.indd 3 3/6/ 3:3 PM

4 OUTSTANDING FEATURES MEDIUM STATIC S ( AWHE MODELS) Capacitie base o ARI 44 Safety al electrica component ar UL o CE approved. Gauge galvanize stee cabinets Coate insulate drai pan Standar 4 row, 3/ tube diameter wit aluminu fi n fo hig capacit effi ciency Eas accessibility Thic aluminu fi lte o wh models Three speed centrifuga fan Permanent split capacitor ( PSC) wit buil i overloa protection variet o valve packages ar availab a a option ttractiv wal moun thermostat Mediu externa stati pressur u t. Inc wg Enablin unit fo duc connectio t mor tha on room HIGH STATIC S ( AWAP & AWAR MODELS) Safety al electrica component ar UL o CE approved Unit ar EUROVENT certifi ed Gauge insulate galvanize stee housing Ceilin mountin hole o collar ar provided Forwar curve fan staticall dynamicall balanced Permanent split capacitor ( PSC) speed wit automati therma overloa protection Coolin o heatin coils / tube diameter, 4 rows & 6 rows Insulate drai pan Thic aluminu fi lter 4 GE_AWHE_series.indd 4 3/6/ 3:3 PM

MODEL DECODING & BASIC (SERIES) AW: CHILLE D WATER FA N COIL UNI T 3 & 4 APPLICATION MEDIUM STATIC S HE : H ORIZONTAL CONCEALE D WITH PLENUM HIGH STATIC S AP : H ORIZONTAL CONCEALE D WITH PLENUM AR :

5 & 6 7 SIZE ELECTRICAL (x CFM) SUPPLY (V-Ph-Hz) 3 4 6 6 4 6 Q : /4--5 COIL X : N O COIL C : 4 ROW, CHILLED OR HOT WATE R D : 6 ROW, * CHILLE D WATE R 9 HEATER X : NO HEATER D : kw E : 3 kw F : 4 kw

5 MODEL DECODING & BASIC (SERIES) AW: CHILLE D WATER FA N COIL UNI T 3 & 4 APPLICATION MEDIUM STATIC S HE : H ORIZONTAL CONCEALE D WITH PLENUM HIGH STATIC S AP : H ORIZONTAL CONCEALE D WITH PLENUM AR : H ORIZONTAL CONCEALE D WITH CASING * Applicable for AWAP & AWAR models only. 5 & 6 7 SIZE ELECTRICAL (x CFM) SUPPLY (V-Ph-Hz) Q : /4--5 COIL X : N O COIL C : 4 ROW, CHILLED OR HOT WATE R D : 6 ROW, * CHILLE D WATE R 9 HEATER X : NO HEATER D : kw E : 3 kw F : 4 kw G : 5 kw H : 6 kw J : 7 kw K : kw L : 9 kw M : kw * TUBING & COIL L : LH SIDE & ALUMINUM FI N R : RH SIDE & ALUMINUM FI N B : LH SIDE & COPPER FI C : RH SIDE & COPPER FI NOTE :.RH/LH FACING AIR DIS- CHARGE.. ELECTRICAL CONNECTION ON THE OPPOSITE SIDE. N N GENERATION B :SECOND GENERATION APPLICATIONS AWHE: HORIZONTAL CONCEALED WITH PLENUM Ducted applications. Return air plenum. Rear or bottom return air with air filter. Removable heater. Drain pan & drip lip. Control box. AWAP: HORIZONTAL CONCEALED WITH PLENUM Ducted applications with return air plenum. Return air opening on the rear or bottom. * Easy access to motor through plenum panel. Electrical control box opposite side of piping connections. High static up to.5 External Static Pressure (ESP). AWAR: HORIZONTAL CONCEALED WITH CASING Ideal for ducted supply & return air applications. Duct collar, front & rear. Removable bottom panel for service access. High static up to.5 External Static Pressure (ESP). 5 GE_AWHE_series.indd 5 3/6/ 3:4 PM

6 PHYSICAL DATA MEDIUM STATIC S DESCRIPTION Number of blowers 4 4 Number of motors Coil face area (sq. f t.) Nominal filter (" thick) size, inches x x x x 33 x 4 x 54 x 6 Drip pan / casing material MODEL: AWHE gauge galvanized steel Shipping weight (4 row coil), Lbs HIGH STATIC S DESCRIPTION Number of blowers Number of motors Coil face area (sq. ft.) Nominal filter (" thick) AWAP 4 x 4 x 6 4 x 3 4 x 35 4 x 4 4 x 45 4 x 5 4 x 54 size, inches AWAR 4 x 4-3/4 4 x 9-3/4 4 x 3-3/4 4 x -3/4 4 x 33-3/4 4 x 3-3/4 4 x 43-3/4 4 x 47-3/4 Drip pan / casing material Shipping weight (4 row coil), Lbs. MODELS: AWAP & AWAR gauge galvanized steel AWAP AWA R FAN PERFORMANCE DATA / MODEL: AWHE SIZE BLOWER MOTOR SPEED EXTERNAL STATIC PRESSURE (Inches of water) HIGH MEDIUM LOW HIGH MEDIUM LOW HIGH MEDIUM LOW HIGH MEDIUM LOW HIGH MEDIUM LOW HIGH MEDIUM LOW HIGH MEDIUM LOW NOTE: Airflow values include losses for dry coil & filters. 6 GE_AWHE_series.indd 6 3/6/ 3:4 PM

7 FAN PERFORMANCE DATA (4 ROW) / MODELS: AWAP & AWAR SIZE BLOWER MOTOR SPEED EXTERNAL STATIC PRESSURE (Inches of water) HIGH MEDIUM LOW HIGH MEDIUM LOW HIGH MEDIUM LOW HIGH MEDIUM LOW HIGH MEDIUM LOW HIGH MEDIUM LOW HIGH MEDIUM LOW HIGH MEDIUM LOW NOTE:. Airflow values include losses for dry coil & filters.. For 6 row coils, add. H O to the required external static pressure. 3. Do not operate high speed below. external static pressure (ESP). 7 GE_AWHE_series.indd 7 3/6/ 3:4 PM

8 HEATING CAPACITIES / MODEL: AWHE HOT WATER HEATING CAPACITIES IN MBH ROWS OF GALLONS PER MINUTE COIL SIZE HOT WATER CAPACITY CORRECTION FACTORS ENTERING AIR TEMP. F ENTERING WATER TEMPERATURE F NOTE: Application BTUH = Base BTUH (@ 7 F EAT, F EWT) x Correction factor. GE_AWHE_series.indd 3/6/ 3:4 PM

9 HEATING CAPACITIES / MODELS: AWAP & AWAR HOT WATER CAPACITY IN MBH SIZE GPM FOUR ROW EWT - F PD ENTERING AIR TEMP. - F HOT WATER CAPACITY CORRECTION FACTORS ENTERING WATER TEMPERATURE - F NOTE: Application BTUH = Base BTUH (@ 7 F EAT, F EWT) x Correction factor. NOTE:. 7 F EAT, PD based on F EWT, Nominal CFM.. For conditions not tabulated, use capacity at F EWT and correct for design conditions with factors tabulated below. ELECTRIC HEATERS / MODELS: AWAP & AWAR CONSTRUCTION The electric heater consists of open coils of the highest grade resistance wire which are located and insulated by ceramic insulators in plated steel brackets. The heater coils are positioned on the entering (preheat) side the of cooling coil. ELECTRIC HEAT APPLICATIONS ELECTRIC HEATER CAPACITY AMPS MAXIMUM kw EQUIVALENT SIZE RATING BTUH V. V. 4V. BARE RESISTANCE WIRE NOTE: Two power sources required on electric heat units (motors - heaters). 9 GE_AWHE_series.indd 9 3/6/ 3:4 PM

10 COOLING WATER PRESSURE DROP CURVES / MODEL: AWHE Pressure Drop - Feet of Water Water Flow - GPM SOUND POWER DATA MODEL: AWHE MOTOR DATA MODEL: AWHE db re Watts SPEED SIZE 5 OCTAVE BAND & CENTER FREQUENCY (CPS) AT ZERO ESP H M L SIZE SPEED /4V-Ph-5Hz AMPS WATTS H.4 75 M. 45 L. 35 H M.3 7 L. 65 H M.55 4 L.3 H M.6 4 L.44 3 H.9 M.6 65 L H.3 M. 6 L.6 4 H.56 3 M.9 5 L.9 5 GE_AWHE_series.indd 3/6/ 3:4 PM

11 SOUND POWER DATA / MODELS: AWAP & AWAR db re Watts (@. ESP) OCTAVE BAND CENTER FREQUENCY - Hz SIZE SPEED H M L H M L H M L H M L H M L H M L H M L H M L MOTOR DATA / MODELS: AWAP & AWAR /4V-Ph-5Hz SIZE SPEED AMPS WATTS H. 5 6 M. 55 L.5 5 H 5 95 M. L.7 3 H.4 5 M.3 75 L.9 5 H. 445 M.6 3 L. H M.6 3 L. 3 H M.3 4 L.6 3 H M.3 4 L.6 33 H M.3 4 NOTES: L Watts and Amps are total per unit. ESP.. Unit Size 6 thru have one motor; Unit Size thru have two motors. GE_AWHE_series.indd 3/6/ 3:4 PM

12 CHILLED WATER COOLING CAPACITIES / MODEL: AWHE TOTAL & SENSIBLE COOLING CAPACITY OF 4 ROW/ FINS ENTERING AIR TEMP. = 7 F DB/6 F WB WTR 4 F EWT 45 F EWT 5 F EWT F SIZE TC SC GPM TC SC GPM TC SC GPM ENTERING AIR TEMP. = 74 F DB/6 F WB WTR 4 F EWT 45 F EWT 5 F EWT F SIZE TC SC GPM TC SC GPM TC SC GPM ENTERING AIR TEMP. = 74 F DB/63 F WB ENTERING AIR TEMP. = 76 F DB/63 F WB WTR 4 F EWT 45 F EWT 5 F EWT WTR 4 F EWT 45 F EWT 5 F EWT F SIZE TC SC GPM TC SC GPM TC SC GPM F SIZE TC SC GPM TC SC GPM TC SC GPM ENTERING AIR TEMP. = 76 F DB/65 F WB ENTERING AIR TEMP. = 7 F DB/65 F WB WTR 4 F EWT 45 F EWT 5 F EWT WTR 4 F EWT 45 F EWT 5 F EWT F SIZE TC SC GPM TC SC GPM TC SC GPM F SIZE TC SC GPM TC SC GPM TC SC GPM LEGEND: TC - Total Capacity (MBH); SC - Sensible Heat Capacity (MBH); WTR - Water Temperature Rise ( F); EWT - Entering Water Temperature ( F) GE_AWHE_series.indd 3/6/ 3:4 PM

13 CHILLED WATER COOLING CAPACITIES / MODEL: AWHE TOTAL & SENSIBLE COOLING CAPACITY OF 4 ROW/ FINS ENTERING AIR TEMP. = F DB/67 F WB ENTERING AIR TEMP. = F DB/67 F WB WTR 4 F EWT 45 F EWT 5 F EWT WTR 4 F EWT 45 F EWT 5 F EWT F SIZE TC SC GPM TC SC GPM TC SC GPM F SIZE TC SC GPM TC SC GPM TC SC GPM ENTERING AIR TEMP. = F DB/69 F WB ENTERING AIR TEMP. = 4 F DB/69 F WB WTR 4 F EWT 45 F EWT 5 F EWT WTR 4 F EWT 45 F EWT 5 F EWT F SIZE TC SC GPM TC SC GPM TC SC GPM F SIZE TC SC GPM TC SC GPM TC SC GPM ENTERING AIR TEMP. = 4 F DB/7 F WB ENTERING AIR TEMP. = 6 F DB/7 F WB WTR 4 F EWT 45 F EWT 5 F EWT WTR 4 F EWT 45 F EWT 5 F EWT F SIZE TC SC GPM TC SC GPM TC SC GPM F SIZE TC SC GPM TC SC GPM TC SC GPM LEGEND: TC - Total Capacity (MBH); SC - Sensible Heat Capacity (MBH); WTR - Water Temperature Rise ( F); EWT - Entering Water Temperature ( F) NOTE: Spaces le blank correspond to GPM s in laminar flow areas or excessive water velocities flowing through the coil. Above CFM ratings are nominal. 3 GE_AWHE_series.indd 3 3/6/ 3:4 PM

14 CHILLED WATER COOLING CAPACITIES / MODELS: AWAP & AWAR TOTAL & SENSIBLE COOLING CAPACITY OF 4 ROW/ FINS ENTERING AIR TEMP. = 76 F DB/63 F WB (@ HIGH SPEED) WTR ( F) 4 F EWT 45 F EWT 5 F EWT SIZE TC SC GPM TC SC GPM TC SC GPM ENTERING AIR TEMP. = 4 F DB/69 F WB (@ HIGH SPEED) WTR ( F) 4 F EWT 45 F EWT 5 F EWT SIZE TC SC GPM TC SC GPM TC SC GPM ENTERING AIR TEMP. = F DB/67 F WB (@ HIGH SPEED) WTR ( F) 4 F EWT 45 F EWT 5 F EWT SIZE TC SC GPM TC SC GPM TC SC GPM NOTE: For any other conditions, please use selection soflware for AWAP & AWAR fan coil units. Apart from capacities, this soflware provides; a) Sensible heat ratio b) Leaving air temperature (DB/WB) - F c) Leaving water temperature - F d) Leaving water velocities (FPM) e) Water pressure drop (feet of water) LEGEND: TC - Total Capacity (MBH) SC - Sensible Heat Capacity (MBH) WTR - Water Temperature Rise ( F) EWT - Entering Water Temperature ( F) GPM - Water flow (Gallons Per Minute) 4 GE_AWHE_series.indd 4 3/6/ 3:4 PM

15 CHILLED WATER COOLING CAPACITIES / MODEL: AWAP & AWAR TOTAL & SENSIBLE COOLING CAPACITY OF 6 ROW/ FINS ENTERING AIR TEMP. = 76 F DB/63 F WB (@ HIGH SPEED) WTR ( F) 4 F EWT 45 F EWT 5 F EWT SIZE TC SC GPM TC SC GPM TC SC GPM ENTERING AIR TEMP. = 4 F DB/69 F WB (@ HIGH SPEED) WTR ( F) 4 F EWT 45 F EWT 5 F EWT SIZE TC SC GPM TC SC GPM TC SC GPM ENTERING AIR TEMP. = F DB/67 F WB (@ HIGH SPEED) WTR ( F) 4 F EWT 45 F EWT 5 F EWT SIZE TC SC GPM TC SC GPM TC SC GPM NOTE: For any other conditions, please use selection soflware for AWAP & AWAR fan coil units. Apart from capacities, this soflware provides; a) Sensible heat ratio b) Leaving air temperature (DB/WB) - F c) Leaving water temperature - F d) Leaving water velocities (FPM) e) Water pressure drop (feet of water) LEGEND: TC - Total Capacity (MBH) SC - Sensible Heat Capacity (MBH) WTR - Water Temperature Rise ( F) EWT - Entering Water Temperature ( F) GPM - Water flow (Gallons Per Minute) 5 GE_AWHE_series.indd 5 3/6/ 3:4 PM

16 COOLING CAPACITY CORRECTION FACTORS MODEL: AWHE AIRFLOW CFM C t C s C t C s C t C s C t C s C t C s C t C s C t C s NOTE:. Cooling application BTUH: Base BTUH (@ Nominal CFM) x Capacity Correction Factor for (C Total, and C for sensible heat). t s. Heating application BTUH: Base Heating BTUH (@ Nominal CFM) x Capacity Correction Factor,. C s 3. Above based on constant water temperature difference. MODELS: AWAP & AWAR CFM AIRFLOW C t C s C t C s C t C s C t C s C t C s C t C s C t C s C t C s NOTE:. Cooling application BTUH: Base BTUH (@ Nominal CFM) x Capacity Correction Factor for (C Total, and C for sensible heat). t s. Heating Application BTUH = Base Heating BTUH (@ Nominal CFM) x Capacity Correction Factor, C ALTITUDE COOLING CORRECTION FACTOR* ELEVATION TOTAL CAPACITY SENSIBLE HEAT * Load at sea level condition = Design load at elevation Altitude correction factor s. 6 GE_AWHE_series.indd 6 3/6/ 3:4 PM

17 TYPICAL SCHEMATIC WIRING DIAGRAM / MODEL: AWHE L /7 COM LEGEND AFS AIRFLOW SWITCH EV ELECTRIC VALVE L M 3 4 H 3/5 H /4 C FM FAN MOTOR GN D G ROUND CONNECTIO N TO FUSE DISCONNECT SWITCH L L GND HIGH MED LOW (SEE NOTE # 3) OPTIONAL (SEE NOTE -5) HIGH MED LOW FM FM COM COM HC NC NO OPT'L GRN EV GND HC HEATER CONTACTOR HTR HEATE R L/L LINE /LINE OPT' L O PTIONA L OHT OVER HEAT THERMOSTAT _ FIELD WIRING FACTORY WIRING (SEE NOTE # 3) AFS C OPTIONAL (SEE NOTE-4) HC OHT HTR FACTORY WIRED MOTOR LEADS BASIC MODEL COM HI MED HI MED MED LO LO (WHT) (BLK) (YEL) (BLU) (ORN) (RED) CONTACT COM HIGH MED LOW 3 COM HIGH MED LOW OFF 4 COM HIGH MED LOW LOW COOL 6 COM HIGH MED LOW COM HIGH MED LOW MED COOL COM HIGH MED LOW COM HIGH HIGH COOL MED LOW 3 SPEED SWITCH SEQUENCE L-4 L- L- L-3 O X X X X X X NOTE:. Motors thermally protected.. Use copper conductors only. 3. Free end of fan motor leads to be capped with crimpable wire nut. 4. Applicable only if AFS is required. 5. FM not required for single motor AHU. If FM is factory installed, please read broken lines as continuous lines Field wiring. If it is factory wiring, please read broken lines as continuous lines. 7 GE_AWHE_series.indd 7 3/6/ 3:4 PM

18 TYPICAL SCHEMATIC WIRING DIAGRAM / MODEL: AWAP & AWAR L /7 COM LEGEND AFS AIRFLOW SWITCH CAP CAPACITOR TO FUSE DISCONNECT SWITCH L L GND L M 3 4 H HIGH-BLK MED-BLU LOW-RED BRN CAP BRN OPTIONAL (SEE NOTE -4) HIGH-BLK MED-BLU LOW-RED FM FM COM COM 3/5 H HC /4 C OPT'L GRN EV GND EV ELECTRIC VALVE FM FAN MOTOR GN D G ROUND CONNECTIO N HC HEATER CONTACTOR HTR HEATER L/L LINE /LINE OHT OVER HEAT THERMOSTAT _ FIELD WIRING FACTORY WIRING CAP BRN BRN AFS NC NO C OPTIONAL (SEE NOTE-3) HC OHT HTR OPTIONAL (SEE NOTE -5) OHT HTR 3 SPEED SWITCH SEQUENCE CONTACT L-4 L- L- L-3 OFF O LOW COOL X X MED COOL X X HIGH COOL X X NOTE:. Motors thermally protected.. Use copper conductors only. 3. Applicable only if AFS is required. 4. FM not required for single motor AHU. If FM is factory installed, please read broken lines as continuous lines. 5. Heater is not required for single heater circuit Field wiring. If it is factory wiring, please read broken lines as continuous lines. 7. Free end of fan motor leads to be capped with crimpable wire nut. GE_AWHE_series.indd 3/6/ 3:4 PM

19 DIMENSIONS / MODEL: AWHE -7/6" 7 G -7/6" -3/" -/4" (Opening) -3/" 9 5-3/" -/" Ø3/" Hole For Mounting(TYP) 6 3 -/4" (Opening) -/4" D (Mounting Holes) 5-5/ 5 3-3/4" 9-3/" -/4" B A C 6" -7/6" 7/" 4 E F TOP VIEW RIGHT SIDE VIEW F FRONT VIEW DIMENSIONS MODEL CFM A B C D E F G NO. OF NO. OF MOTORS BLOWERS. Flexible conduit. Air vent 3. Drip lip 4. 5/ O.D. coil outlet 5. 5/ O.D. coil inlet 6. 7/ O.D. drain 7. Junction box. Mounting clips 9. Filter rack. Filter rack (optional location) AWHE- -/ 5-5/ /4 AWHE / 9-5/ /4 AWHE / 5-5/ /4 AWHE / 3-5/ /4 -/4 33-/4 AWHE- 43-/ 37-5/ /4 -/4 4-/4 AWHE- 57-/ 5-5/ /4 -/4 54-/4 4 AWHE- 65-/ 59-5/ /4 -/4 6-/4 4 9 GE_AWHE_series.indd 9 3/6/ 3:4 PM

20 DIMENSIONS MODEL: AWAP (SINGLE BLOWER) /4 7 E / / / DRIP LIP 9 3/ 6 4 / D (MOUNTING HOLES) C 3 B A TOP VIEW 4 7/ 9 3/4 3 / 6 7/ RIGHT SIDE VIEW MODEL: AWAP (DOUBLE BLOWER) 4 E /4 / /4 / DRIP LIP 9 3/ 6 4 / D (MOUNTING HOLES) C 3 B A 4 7/ 9 3/4 3 / 6 7/ TOP VIEW RIGHT SIDE VIEW NOTE: All dimensions are in inches. For coil connection dimensions, see page. MODEL CFM DIMENSIONS A B C D E NO. OF MOTORS COIL CONN. SIZE NO. OF (inch), INLET/OUTLET BLOWERS 4 ROW 6 ROW AWAP / 7/ AWAP / 7/ AWAP / 7/ AWAP / -/ AWAP / -/ AWAP / -/ AWAP / -/ AWAP / -/. Blower housing. Motor 3. Coil 4. 7/ O.D. drain 5. Drain pan 6. (4) 3/4 O.D. mounting holes 7. Junction box. Supply air duct, 9. Coil outlet. Coil inlet. Air vent. Return air duct 3. Flexible conduit 4. Rear access panel 5. Plenum 6. Mounting clips 7. Heater GE_AWHE_series.indd 3/6/ 3:4 PM

21 DIMENSIONS / MODEL: AWAR 3/ 4 9/6 5 /4 / 3 7 5/ 3/ PROJECTED REAR PANEL 5 D C 9 9/6 B A 4 3 TOP VIEW RIGHT SIDE VIEW MODEL CFM DIMENSIONS A B C D NO. OF MOTORS COIL CONN. SIZE NO. OF (inch), INLET/OUTLET BLOWERS 4 ROW 6 ROW AWAR / 7/ AWAR- 36 5/ 7/ AWAR / 7/ AWAR / -/ AWAR / -/ AWAR / -/ AWAR / -/ AWAR / -/ NOTE: All dimensions are in inches. For coil connection dimensions, see page.. -/ dia. drain knockout. 7/ dia. electrical knockout 3. -/ dia. supply & return knockout 4. () Mounting channels with / x mounting slot (4) 5. Filter 6. Motor junction box 7. Motor-blower assembly. 7/ O.D. drain connection 9. Coil outlet. Coil inlet. Supply air duct,. Heater GE_AWHE_series.indd 3/6/ 3:4 PM

22 COIL CONNECTION DIMENSIONS / MODEL: AWAP B F A E D H C G INLET OUTLET TOLERANCE: ± 5/" 4 ROW COIL 6 ROW COIL RIGHT HAND (RH) COIL CONN. DIMENSIONS SIZE 4 ROW COIL 6 ROW COIL A B C D E F G H 6-3/4 6-/ 3-5/ -7/ -3/4-3/ 3-5/ -7/ -3/4 6-/ 3-5/ -7/ -3/4-3/ 3-5/ -7/ -3/4 6-/ 3-5/ -7/ -3/4-3/ 3-5/ -7/ -3/4 6-/ 3-5/ -7/ -3/4-3/ 3-5/ -7/ 4-3/4 6-/ 3-/6-7/6-3/4-3/ 3-/6-7/6 6-3/4 6-/ 3-/6-7/6-3/4-3/ 3-/6-7/6-3/4 6-/ 3-/6-7/6-3/4-3/ 3-/6-7/6-3/4 6-/ 3-/6-7/6-3/4-3/ 3-/6-7/6 LEFT HAND (LH) COIL CONN. DIMENSIONS SIZE 4 ROW COIL 6 ROW COIL A B C D E F G H 6-3/4 6-/ 4-/4 -/4-3/4-3/ 4-/4 -/4-3/4 6-/ 4-/4 -/4-3/4-3/ 4-/4 -/4-3/4 6-/ 4-/4 -/4-3/4-3/ 4-/4 -/4-3/4 6-/ 4-/4 -/4-3/4-3/ 4-/4 -/4 4-3/4 6-/ -7/6 3-/6-3/4-3/ -7/6 3-/6 6-3/4 6-/ -7/6 3-/6-3/4-3/ -7/6 3-/6-3/4 6-/ -7/6 3-/6-3/4-3/ -7/6 3-/6-3/4 6-/ -7/6 3-/6-3/4-3/ -7/6 3-/6 COIL CONNECTION DIMENSIONS / MODEL: AWAR B F A E D H C G INLET OUTLET TOLERANCE: 5/" ± 4 ROW COIL RIGHT HAND (RH) COIL CONN. DIMENSIONS SIZE 4 ROW COIL 6 ROW COIL A B C D E F G H 6 3-3/4 7-/ 3-7/ -3/ 3-3/4 9-3/ 3-7/ -/ 3-3/4 7-/ 3-7/ -3/ 3-3/4 9-3/ 3-7/ -/ 3-3/4 7-/ 3-7/ -3/ 3-3/4 9-3/ 3-7/ -/ 3-3/4 7-/ 3-7/ -3/ 3-3/4 9-3/ 3-7/ -/ 4 3-3/4 7-/ 3-5/6 -/6 3-3/4 9-3/ 3-5/6 -/ /4 7-/ 3-5/6 -/6 3-3/4 9-3/ 3-5/6 -/6 3-3/4 7-/ 3-5/6 -/6 3-3/4 9-3/ 3-5/6 -/6 3-3/4 7-/ 3-5/6 -/6 3-3/4 9-3/ 3-5/6 -/6 SIZE 6 ROW COIL LEFT HAND (LH) COIL CONN. DIMENSIONS 4 ROW COIL 6 ROW COIL A B C D E F G H 6 3-3/4 7-/ 4-/ -/ 3-3/4 9-3/ 4-/ -/ 3-3/4 7-/ 4-/ -/ 3-3/4 9-3/ 4-/ -/ 3-3/4 7-/ 4-/ -/ 3-3/4 9-3/ 4-/ -/ 3-3/4 7-/ 4-/ -/ 3-3/4 9-3/ 4-/ -/ 4 3-3/4 7-/ -/6 3-5/6 3-3/4 9-3/ -/6 3-5/ /4 7-/ -/6 3-5/6 3-3/4 9-3/ -/6 3-5/6 3-3/4 7-/ -/6 3-5/6 3-3/4 9-3/ -/6 3-5/6 3-3/4 7-/ -/6 3-5/6 3-3/4 9-3/ -/6 3-5/6 NOTE: All dimensions are in inches. GE_AWHE_series.indd 3/6/ 3:4 PM

23 COIL CONNECTION DIMENSIONS / MODEL: AWHE A OUTLET C B COIL CONN. DIMENSIONS SIZE 4 ROW COIL A B C 6-3/4-5/ 4-/ /4-5/ 4-/ /4-5/ 4-/ /4-5/ 6-/4 6-3/4-5/ 6-/4 6-3/4-5/ 6-/4 6-3/4-5/ 6-/4 INLET VALVE PACKAGES VALVE PACKAGE -D VALVE PACKAGE 3-D * 3 3 Two Gate Shut Off Valves Two Gate Shut Off Valves One Balancing Valv e One Balancing Valve 3 One Two Way Motor Valv e 3 One Three Way Motor Valv e * NOTE:. Bypass is required, when aquastat is used for automatic cooling/heating system changeover.. Three way motor valves are non-modulating type. 3 GE_AWHE_series.indd 3 3/6/ 3:4 PM

24 Middle East Air Conditioners Co. Ltd. Middle East Air Conditioners Co. Ltd. P.O. Box 4346 Dammam 344 KSA Kingdom of Saudi Arabia Tel: Fax: GE_AWHE_series.indd 4 3/6/ 3:5 PM

GENERAL ELECTRIC CONCEALED CHILLED WATER FAN COIL UNITS

GENERAL ELECTRIC CONCEALED CHILLED WATER FAN COIL UNITS ACWL Series ACWL0 thru ACWL4 00 CFM thru 400 CFM GE_ACWL_series.indd 3// : PM CONTENTS Model decoding 3 Unit features 3 Standard specifications 3-4