Fabri-Valve. C67 Bi-Directional Knife Gate Valve
|
|
|
- Alison Barnett
- 6 years ago
- Views:
Transcription
1 Fabri-Valve C67 Bi-Directional Knife Gate Valve
2 C67 Bi-Directional Knife Gate Valve The Fabri-Valve Figure C67 features a unique, patented*, perimeter seal that provides bi-directional shutoff. The seal is retained in the valve body by its trapezoidal shape. A relief has been cast into the valve body behind the seal. Designed to overcome the problems experienced with existing perimeter seal designs, the relief greatly reduces seal compression set; the shape of the seal eliminates leakage due to seat rollover, eliminates seal pullout due to fluid velocity, and eliminates grooves that collect material and prevent the valve from properly closing. This unique valve design is available in stainless steel and carbon steel. Stainless steel bodied valves have white EPDM seals as standard. Carbon steel bodied valves have black EPDM seals as standard. Black Viton or white Viton, AFLAS, Hycar, Hypalon, Neoprene, HNBR, and other seal materials are available as options. All Figure C67 handwheel actuated knife gate valves include a provision for a locking device. Specifications Size Range 2 36 Pressure Rating psi (10.3 bar) CWP (cold working pressure) psi (6.9 bar) psi (5.5 bar) Consult factory for higher pressure designs. Temperature Rating EPDM Seat -50 F (-45 C) to 280 F (138 C) Viton Seat -30 F(-34 C) to 350 F (177 C) Flange Drilling ANSI 125/150 Drilling Testing Every Fabri-Valve Figure C67 valve is fully tested prior to shipment. Testing includes a body shell test, a seat test and a cycling test to insure proper functioning of moving parts. Additional testing is also available. Please let us know your requirements. Standard Shell test: Hydro test at 1.5 times the rated CWP (cold working pressure) Zero allowable leakage Standard Resilient Seat test: Hydro test at 15 psi (1 bar) and rated CWP Energized cored packing and packing supports are standard with 6 (DN 150) and larger Figure C67 valves *U.S. Patent #5, 154,397 2
3 Pressure/Temperature Ratings The table below is the Maximum Pressure Temperature Ratings for the metallic components only. When checking pressure/temperature ratings, check the temperature rating and chemical compatibility of the packing material and the resilient seat material. In a majority of knife gate valve designs, the temperature limit or the chemical compatibility of the seat and/or packing material determines the practical pressure/ temperature limitations. Figure C67 Pressure-Temperature Rating -psi Temp Cast Cast Cast Cast Cast Cast WCB F C L L 317L A Shutoff Performance Zero leakage. All sizes. Flow Coefficients The Cv values below represent U.S. gallons per minute 60 F water through a 100% open valve at a pressure drop of 1 psi. The metric equivalent, Kv, is the flow of water at 16 C through the valve in cubic meters per hour at a pressure drop of 1 kg/ cm 2. To convert Cv to Kv, multiply the Cv by Figure C67 Knife Gate Valves C v Ratings, Port Diameter and Area Standard Port With V- Seat Valve Size C v Port I. D. Port Area C v Port I.D. Port Area In. DN Inches Sq. In. Inches Sq. In , , , , , , , , , , , , , , , , , , , , , Consult Factory Valve Open Valve Closed Seat Flush Gate Relief Seat Pushed Into Relief 3
4 Dimensions: C67 with Handwheel or Cylinder Valve Size TABLE 1 DIMENSION Inches (mm) C67 with HANDWHEEL OR CYLINDER Inches DN A C D H J K L M N P R S T V W lb kg HW 2-1/2 CYL 3-1/4 CYL HW 2-1/2 CYL 3-1/4 CYL 2-1/2 CYL 3-1/4 CYL /8 18-3/ / /8-18 1/ /64 2 5/8-11NC 4 4-3/4 3-5/8 4 1/16 9/16 1-7/ (378) (462) (418) (254) (76) (102) (51) (152) (11) (121) (92) (102) (2) (14) (48) HW 2-1/2 CYL 3-1/4 CYL HW 2-1/2 CYL 3-1/4 CYL 2-1/2 CYL 3-1/4 CYL / / / /8-18 1/ /2 23/64 2 5/8-11NC /16 9/ (448) (525) (487) (254) (76) (102) (76) (191) (9) (152) (127) (102) (2) (14) (51) HW 3-1/4 CYL 4 CYL HW 3-1/4 CYL 4 CYL 3-1/4 CYL 4 CYL / / / /2 1/4-18 3/ /64 2 5/8-11NC 8 7-1/2 6-3/16 4 1/16 11/ (503) (557) (576) (254) (102) (114) (102) (229) (11) (191) (157) (102) (2) (17) (51) HW 4 CYL 6 CYL HW 4 CYL 6 CYL 4 CYL 6 CYL /8 29-9/ / /2 6-1/2 3/8-18 3/ /16 2 3/4-10NC 8 9-1/2 8-1/2 7-3/8 1/16 5/8 2-1/ (695) (751) (760) (406) (114) (165) (152) (279) (11) (241) (216) (187) (2) (16) (57) HW 6 CYL 8 CYL HW 6 CYL 8 CYL 6 CYL 8 CYL / /8 36-7/ /2 8-5/8 3/8-18 3/ /2 21/32 2 3/4-10NC /4 10-5/8 7-3/8 1/16 13/16 2-3/ (868) (924) (937) (406) (165) (219) (203) (343) (17) (298) (270) (187) (2) (21) (70) HW 8 CYL 10 CYL HW 8 CYL 10 CYL 8 CYL 10 CYL /8 42-9/ / /8 10-7/8 3/8-18 1/ /16 4 7/8-9NC /4 12-3/4 7-3/8 1/16 15/16 2-3/ (1006) (1081) (1100) (406) (219) (276) (254) (406) (14) (362) (324) (187) (2) (24) (70) HW 8 CYL 10 CYL HW 8 CYL 10 CYL 8 CYL 10 CYL / / /8 10-7/8 3/8-18 1/ /2 4 7/8-9NC /2 3/ (1175) (1245) (1264) (508) (219) (276) (305) (483) (13) (432) (381) (191) (5) (25) (76) HW 12 CYL 14 CYL HW 12 CYL 14 CYL 12 CYL 14 CYL / / / /4 14-3/4 1/2-14 3/ /4 21 1/ NC /4 16-1/4 7-3/4 3/16 15/ (1310) (1399) (1427) (508) (324) (375) (337) (533) (13) (476) (413) (197) (5) (24) (76) HW 12 CYL 14 CYL HW 12 CYL 14 CYL 12 CYL 14 CYL / /8 63-1/ /4 14-3/4 1/2-14 3/ /4 23-1/2 5/ NC /4 18-1/2 11-1/4 3/16 1-1/16 3-1/ (1503) (1584) (1613) (508) (324) (375) (387) (597) (16) (540) (470) (286) (5) (27) (89) HW 12 CYL 14 CYL HW 12 CYL 14 CYL 12 CYL 14 CYL /2 70-1/ / /4 14-3/4 1/2-14 3/ / / /8-7NC / /4 3/16 1-1/16 3-1/ (1689) (1780) (1795) (762) (324) (375) (438) (635) (15) (578) (533) (286) (5) (27) (89) HW 14 CYL 16 CYL HW 14 CYL 16 CYL 14 CYL 16 CYL /8 77-1/4 77-3/ /4 17 3/4-14 3/ /4 27-1/2 31/ /8-7NC /16 1-3/16 4-1/ (1851) (1962) (1975) (762) (375) (432) (489) (699) (25) (635) (584) (356) (5) (30) (114) HW 16 CYL 18 CYL HW 16 CYL 18 CYL 16 CYL 18 CYL /4 88-9/ / /4-14 3/ / / /4-7NC /2 27-1/4 14-1/8 3/16 1-5/16 4-1/ (2153) (2249) (2299) (762) (432) (483) (591) (813) (23) (749) (692) (359) (5) (33) (114) HW 18 CYL 18 CYL HW 16 CYL 18 CYL 16 CYL 18 CYL N/A / /16 N/A /4-14 3/ /4 38-3/4 15/ /4-7NC /4 15 3/16 1-5/16 4-1/2 (2716) (2764) (432) (483) (591) (984) (24) (914) (857) (381) (5) (33) (114) HW 18 CYL 20 CYL HW 18 CYL 20 CYL 18 CYL 20 CYL N/A / /16 N/A /4-14 3/ / /2-6NC /4 40-1/4 19 3/16 1-3/8 5-1/2 (3326) (3345) (483) (533) (895) (1168) (25) (1086) (1022) (483) (5) (35) (140) * Figures C67R and C67S with Handwheel Reference Dimensions in (parentheses) Weight * Consult Factory 4
5 C67 with Handwheel or Cylinder Refer to table on page 4 for dimensions 5
6 Dimensions: C67 with Bevel Gear Valve Size TABLE 2 DIMENSION Inches (mm) C67 W/BEVEL GEAR Inches DN A B C D E H J K L M N P R S T V W / / /8 6-1/ /16 2 3/4-10NC 8 9-1/2 8-1/2 7-3/8 1/16 5/8 2-1/4 (678) (525) (305) (314) (165) (152) (279) (11) (241) (216) (187) (2) (16) (57) Materials of Construction Part Body and Chest 34-1/4 25-1/ /8 6-1/ /2 21/32 2 3/4-10NC /4 10-5/8 7-3/8 1/16 13/16 2-3/4 (870) (648) (305) (314) (165) (203) (343) (17) (298) (270) (187) (2) (21) (70) 39-5/8 29-1/ /8 6-1/ /16 4 7/8-9NC /4 12-3/4 7-3/8 1/16 15/16 2-3/4 (1006) (738) (305) (314) (165) (254) (406) (14) (362) (324) (187) (2) (24) (70) 46-1/4 33-7/ /8 6-1/ /2 4 7/8-9NC /2 3/ (1175) (849) (305) (314) (165) (305) (483) (13) (432) (381) (191) (5) (25) (76) 51-9/ / /8 6-1/2 13-1/4 21 1/ NC /4 16-1/4 7-3/4 3/16 15/16 3 (1310) (941) (305) (314) (165) (337) (533) (13) (476) (413) (197) (5) (24) (76) 59-3/ /16 6-1/2 15-1/4 23-1/2 5/ NC /4 18-1/2 11-1/4 3/16 1-1/16 3-1/2 (1503) (1092) (305) (306) (165) (387) (597) (16) (540) (470) (286) (5) (27) (89) 66-1/ /16 6-1/2 17-1/ / /8-7NC / /4 3/16 1-1/16 3-1/2 (1689) (1194) (305) (306) (165) (438) (635) (15) (578) (533) (286) (5) (27) (89) 72-7/8 51-3/ /16 6-1/2 19-1/4 27-1/2 31/ /8-7NC /16 1-3/16 4-1/2 (1851) (1305) (305) (306) (165) (489) (699) (25) (635) (584) (356) (5) (30) (114) 84-3/4 59-3/ /16 6-1/2 23-1/ / /4-7NC /2 27-1/4 14-1/8 3/16 1-5/16 4-1/2 (2029) (1508) (305) (306) (165) (591) (813) (23) (749) (692) (359) (5) (33) (114) 106-3/ / /16 6-1/2 29-1/4 38-3/4 15/ /4-7NC /4 15 3/16 1-5/16 4-1/2 (1851) (1305) (457) (306) (165) (743) (984) (24) (914) (857) (381) (5) (33) (114) 129-1/ /16 6-1/2 35-1/ /2-6NC /4 40-1/4 19 3/16 1-3/8 5-1/2 (2153) (1508) (610) (306) (165) (895) (1168) (25) (1086) (1022) (483) (5) (35) (140) 6-14 Valves have a bevel gear ratio of 3:1 Reference Dimensions in (parentheses) Valves have a bevel gear ratio of 4:1 Materials C67R 2-36 C67S 2-36 C67R-WCB 2-36 Solid, one piece, cast 304, Solid, one piece, cast 304, Solid, one piece, cast carbon steel 316 or 317L stainless steel. 316 or 317L stainless steel. Seat Elastomer, white EPDM std. Elastomer, white EPDM std. Elastomer, black EPDM standard Gate Same grade as body Same grade as body 304 stainless steel Yoke 2-4 Ductile iron Cast 304 stainless steel Ductile iron 6-36 Carbon steel 304 stainless steel Carbon steel Yoke Fasteners Plated steel Stainless steel Plated steel Stem 304 stainless steel 304 stainless steel 304 stainless steel Stem Nut Acid resistant bronze Acid resistant bronze Acid resistant bronze Lubrication Fitting Plated steel Plated steel Plated steel Packing Acrylic / PTFE 1 /Silicone Acrylic / PTFE 1 /Silicone Acrylic/PTFE 1 /Silicone Packing Follower Ductile iron/carbon steel 304 stainless steel Ductile iron Follower Bolts Plated steel Stainless steel Plated steel Handwheel Cast iron Cast iron Cast iron Handwheel Malleable iron Stainless steel Malleable Iron Retaining Nut Tab Washer Stainless steel Stainless steel Stainless steel Travel Stop Plated steel Stainless steel Plated steel 1 PTFE/Graphite/Viton packing is standard with Viton and AFLAS seals. 6
7 C67 with Bevel Gear Refer to table on page 6 for dimensions 7
8 Available Options Hard Gate Material Nickel-TFE Coated Gate Epoxy Coating Thru Drilled Flanges Flush Ports: Chest Only, 6 (DN 150) and larger V-Port Locking Devices E-Z Spin Handwheel Live Loaded Packing Chest Liners Self-Supporting Yokes Alternate Flange Drilling Bevel Gear Chainwheels Cylinder Actuators Electric Actuators Ratchet Extended Stems Rod Boots Chest Liners Optional chest liners fill the clearances between the gate and the chest of the Figure C67 body. Chest liners prevent solids entrapment in the chest area, and also provide increased gate support for high flow/high pressure applications. Standard materials are ultra high molecular weight polyethylene (UHMW) and reinforced PTFE. Engineered Valves, LLC 1110 Bankhead Ave Amory, MS ITT Enginered Valves, LLC Form C67
Fabri-Valve. CF37 Heavy Duty Knife Gate Valve
Fabri-Valve CF37 Heavy Duty Knife Gate Valve CF37 Heavy Duty Knife Gate Valve Fabri-Valve Figures C37 and F37 are some of the most popular knife gate valve configurations. Figure C37 knife gate valves
Fabri-Valve. CF33/CF133 Ported Slide Gate Valve
Fabri-Valve CF33/CF133 Ported Slide Gate Valve CF33/CF133 Ported Slide Gate Valve Fabri-Valve Figures C33 / C133 / F33 / F133 are bi-directional soft seated, slide gate valves designed for on/off service
Fabri-Valve XS150. Knife Gate Valve
Fabri-Valve XS150 Knife Gate Valve XS150 XS150 High Performance Knife Gate Valve The Fabri-Valve XS150 High Performance Knife Gate valve features a robust perimeter seal that provides bi-directional bubble
Fabri-Valve Push Through Slurry Valve SV1. Engineered Valves
Fabri-Valve Push Through Slurry Valve SV1 Engineered Valves Fabri-Valve SV1 - Push Through Slurry Valve The Fabri-Valve SV1 Push-Through Slurry Valve is one of the most versatile knife gate valve configurations
Fabri-Valve. Introduction
Fabri-Valve Introduction Standard Valve? No Such Thing. ITT Corporation has built a remarkable reputation in the standard and custom-engineered valve industry based upon the simple, yet innovative business
HD150/HD300 Heavy Duty Knife Gate Valve
Fabri-Valve HD150/HD300 Heavy Duty Knife Gate Valve HEAVY DUTY VALVES FOR THE OIL SANDS INDUSTRY Heavy Duty Knife Gate Valve The HD150 and HD300 Heavy Duty Knife Gate Valve The Fabri-Valve HD line of Heavy
KNIFE GATE VALVE Product Ref. : KG02W/KG02L
General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective
Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical
L15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST
L15 HEAVY DUTY KNIFE GATE VALVE The L15 model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body
Keystone knife gate valves Figure OS1700
Bi-directional zero leakage ASME Class 150 rated knife gate valve. Designed for the rigors of high pressure slurry and oil sands applications Features General application The OS1700 has many features to
RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-29 (Rev. 02/2016)
General Description The model FKB VGU-29 brings an economic solution to block abrasive and corrosive fluid sewage for granulometry until 5mm. They are light equipments, to be installed through flanges,
BI-DIRECTIONAL KNIFE GATE VALVE
Wastewater treatment plants Food and Beverage Chemical plants Sizes: Working pressure: DN 2"/ 50mm to DN 10"/ 250mm DN 12"/300mm to DN 16"/ 400mm DN 18"/450mm DN 20"/500mm to DN 24"/ 600mm DN 28"/700mm
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-01 (Rev. 02/2016)
General Description The model FKB VGU-01 is developed in accordance with MSS-SP 81 Standard and its function is blocking the fluid sewage. They are light equipments for semi-lug body and flange installation,
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Knife Gate & Butterfly Valves Data Sheets
Knife Gate & Butterfly Valves Data Sheets Series 80-TP Series 80-TP/XL Series 80-BA Series 80-SS Series 80-SSRS Series 80-DI Series 150 Series 120 Butterfly Valves Series TM-3 & TM-4 Butterfly Valves www.townley.net
FABRICAST VALVE. Knife Gate Valves & Custom Fabrication Toll Free: Fax:
FABRICAST VALVE Knife Gate Valves & Custom Fabrication 360-425-0306 Toll Free: 1-877-264-2503 Fax: 360-425-0353 1061 Industrial Way Longview, WA 98632 FIG 40 The Fabricast FIG 40 is a metal seated, uni-directional
BULLETIN D NOVEMBER DeZURIK KSL-SD SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS
BULLETIN 52.00-1D NOVEMBER 2016 DeZURIK KSL-SD SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS Materials of Construction Item Description Material A1 Body Ductile Iron, ASTM A395, Grade 65-45-15, ASTM
HEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10
HEAVY DUTY KNIFE GATE VALVE The SERIES knife gate is a uni-directional lug type valve designed according to the MSS-SP-1 and TAPPI TIS 405- standard for industrial service applications. The design of the
SERIES 2100 Resilient Seated Butterfly Valves
SERIES 2100 Resilient Seated Butterfly Valves Publication S2100-101 Issue 06/16 Rev. C Design Characteristics Applications Commercial Heating & Air Conditioning Waste Water & Water Treatment Sea Water
Model-1 Natural Gas Valves
Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding
BI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended
LCS6822 (Class 150) LCS7822 (Class 300)
Revision 8/22/2012 high performance butterfly valve LCS6822 (Class 150) LCS7822 (Class 300) APPLICATIONS Ideally suited for Commercial, Industrial and Mechanical HVAC Services. Use in other applications
Sealing Test Pressure (MPa)
TRIPLE ECCENTRIC BUTTERFLY VALVE Triple Eccentric Butterfly Valve provides a tight shut-off. This geometry ensures that the disc seal contacts the body seat only at the final shut-off position without
Keystone Figure 990 and 920 Resilient Seated Butterfly Valves
A split body thin disc valve for high flow and modulating service Figure 990 - Wafer body design Figure 920 - Lugged body design Features General application Figure 990 and 920 valves are used when modulating
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH RISING STEM & HANDWHEEL KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR KGV-XD FULLY LUGGED WITH BONNET & HADNWHEEL The XD model knife gate is a Bi-directional
SQUARE PORT KNIFE GATE VALVE
SQUARE PORT KNIFE GATE VALVE The model knife gate is a square port low-pressure valve for highly solid loaded fluids or solids, mainly used in bulk handling and silo outlet applications in industries such
BUTTERFLY VALVE VF-7 Series
BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm
Butterfly Valves. Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: Tel: Fax:
Butterfly Valves Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: 519-759-3911 Tel: 800-563-6302 Fax: 519-759-7970 www.craneenergy.com A Crane Co. Company Butterfly Valves Ordering Information
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-05 (Rev. 08/2015)
General Description The FKB Knife-gate valves model VGU-05 brings cost-effective solution to block the flow of abrasive fluids. These are strong equipments to be installed between flanges, which has Wafer
Paramax Series Control Ball Valve. Specification Data CM6004 7/97
Paramax Control Ball Valve Specification Data CM6004 7/97 Table of Contents Numbering System........................ 3 Specifications............................ 4 Seal Ring Limitations......................
RESILIENT SEATED BUTTERFLY VALVES
DESIGN FEATURES APPLICATIONS: HVAC Chemical/Petrochemical Processing Food and Beverage Industry Power and Utilities Pulp and Paper Industry Stem Configuration: Gives positive attachment for handles or
Valve Solutions for the Bulk Material Industry
Valve Solutions for the Bulk Material Industry SUCCESS STORY Plant name & location: Tronox, llc. Hamilton, Ms Application: Ore Silo Inlet Media: Titanium Rutile Ore Tronox, llc., formerly Kerr McGee Chemical
700 Series Anti-corrosion Control Valves
7 Series Anticorrosion Control Valves Specification Data CH92 11/97 Split Body PTFE Lined Control Valves for Corrosive Applications Table of Contents Foreword.................................................................
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
FloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required.
FloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required. Features Twin plate, flat seat design for enhanced sealing.
THROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice
THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or
DOUBLE GATE KNIFE GATE VALVE. OBX 09/09 8th EDITION Reserves the right to change specifications without notice
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
SERIES 2200 Replaceable Seat Butterfly Valves
SERIES 2200 Replaceable Seat Butterfly Valves Publication S2200-101 Issue 04/18 Rev. A Design Characteristics Multiple Seat Options VSI offers various seat options including EPDM, NBR, Viton, and others
Baumann Corrosion Resistant Control Valve
Product Bulletin D103337X012 Baumann 26000 Corrosion Resistant Control Valve The Baumann 26000 (figures 1 and 2) is a unique corrosion resistant control valve featuring a flangeless wafer valve body and
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
HIGH PERFORMANCE BUTTERFLY VALVE
Revised 11/17/2017 HIGH PERFORMANCE BUTTERFLY VALVE LCS-6822 (Class 150) LCS-7822 (Class 300) APPLICATIONS Ideally suited for commercial, industrial, and mechanical HVAC services. Use in other applications
KGC CAST STAINLESS STEEL KNIFE GATE VALVES BULLETIN MAY 2003
KGC CAST STAINLESS STEEL KNIFE GATE VALVES BULLETIN 35.00-1 MAY 2003 KGC CAST STAINLESS STEEL KNIFE GATE VALVES Design and Construction DeZURIK Cast Knife Gate Valves (KGC) are designed for on-off and
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company
BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2-20 (50mm-500mm) The High Performance Company SERIES 30/31 2-20 (50mm-500mm) Bray Controls is proud to offer a high quality line of butterfly valves
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The model knife gate is an uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and
WAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
BIDIRECTIONAL WAFER Knife Gate Valve
05/10/2012 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with
Series 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
LVS SUP-R-SEAL MODEL ES GATE VALVES
LVS SUP-R-SEAL MODEL ES GATE VALVES LOUISIANA VALVE SOURCE INC. LOUISIANA VALVE SOURCE INC. PROUDLY MADE AND ASSEMBLED IN USA May 2012 Page 1 www.lavalve.com ENGINEERING BULLETIN 2014 Table of Contents:
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
BULLETIN H JUNE DeZURIK KGC-BD BI-DIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES TECHNICAL SPECIFICATIONS
BUETIN 3-1H JUNE 2016 DeZURIK KGC-BD BI-DIRECTIONA CAST STAINESS STEE KNIFE GATE VAVES TECHNICA SPECIFICATIONS Materials of Construction Item Description Material A1 Body 304 Stainless Steel, ASTM A3 CF8
Suction Diffusers. Applications PROTECTION PUMP. Pressures to 790 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS SIZE RANGES RATINGS
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas Suction Diffusers Pressures to 790 PSIG Temperatures to 800ºF FEATURES Filtration
1-20 (25mm-500mm) SERIES 20/21 Wafer/Lug SANITARY AND CHEMICAL / RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company
BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED SERIES 20/21 Wafer/Lug 1-20 (25mm-500mm) The High Performance Company SERIES 20 1-20 (25mm-500mm) Bray Controls is proud to offer a high quality
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
Red Valve SERIES DX. Slurry Knife Gate Valve. The Best Choice for the Toughest Applications
SERIES DX Slurry Knife Gate Valve The Best Choice for the Toughest Applications Design Features 1. Available Sizes 3"- 36" 9 7 6 23. Abrasion-Resistant Slurry Sleeves are Field Replaceable, Provide Bi-Directional,
CLARKSON URETHANE KNIFE GATE VALVES FIGURE SU10R
CLARKSON URETHANE KNIFE GATE VALVES Installation and maintenance instructions for field replaceable urethane lined knife gate valves GENERAL INFORMATION The Clarkson SU10R knife gate valve offers bi-directional
Model 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (Figure ) and Model 5450 (Figure 2) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry. These
Resilient Seated Butterfly Valves
Resilient Seated Butterfly Valves Crane has been a market leader in quarter-turn valves for more than 40 years, and we have earned a reputation as a supplier of superior valves at competitive prices. Our
Mark 50 Series. Back Pressure Regulators Mark 50 Self-Operated Back Pressure Regulators. Self-Operated Back Pressure Regulators.
Mark 50 Series Self-Operated Back Pressure Regulators The Mark 50 Sliding Gate Back Pressure Regulator is used to regulate upstream pressure at a predetermined setpoint. The spring in the Mark 50 holds
PDC Elastomer Lined Series 27 Butterfly Valve 2" thru 36" for 125/150 lb. Flanging
PDC Elastomer Lined Series 27 Butterfly Valve 2" thru 36" for 125/150 lb. Flanging General Description: The PDC "Elastomer Lined" series butterfly valves are available in both full lug and wafer styles.
Red Valve. The World Leader In Pinch Valve Technology MANUAL PINCH VALVES
Red Valve The World Leader In Pinch Valve Technology MANUAL PINCH VALVES Manual Red Valve Pinch Valves Same Face-to-Face As Gate, Plug, Or Ball Valves To 12" 100% Full Port Bi-Directional Droptight Shutoff
CLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
F low L ine 72/73 Wafer & Lug Style Sizes 2-24
F low L ine 72/73 Wafer & Lug Style Sizes 2-24 Cartridge Seated Butterfly Valves KEY FEATURES Body One piece wafer and lugged body for strength and stability in extreme environments Wafer bodies have a
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
KEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,
Section 14. Gate Valves
Section 14 Gate Valves 221 A-Gate Brass Gate Valve S Brass Brass Brass Brass and Wheel Ductile Iron Threading ISO 228 Thread BSP 180 C 16 bar General Purpose Brass Gate Valve AGVFF/015 15 43 85 50 0.24
UNIDIRECTIONAL Knife Gate Valve
12/04/2016 UNIDIRECTIONAL Knife Gate Valve Unidirectional knife gate valve. Mechanically welded body. Various seat and packing materials available. Face to face dimension in accordance with standard, it
Mark 63/64 Series. Pressure Regulators Mark 63/64 Differential Pressure Regulators. Differential Pressure Regulators. Features
Mark 63/64 Series Differential Pressure Regulators The Jordan Mark 63 is designed to maintain a constant differential between the pressure on the discharge side of the regulator and the signal pressure
CENTER LINE. INSTALLATION and MAINTENANCE INSTRUCTIONS RESILIENT SEAT BUTTERFLY VALVES MANUAL AND AUTOMATED
INSTALLATION and MAINTENANCE INSTRUCTIONS MANUAL AND AUTOMATED RESILIENT SEAT BUTTERFLY VALVES CONTENTS Introduction Valve Description... Valve Design Features... Flange and Pipe Schedule Compatibility...
EMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 1075
EMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 107 The JAMESBURY brand FM (Factory Mutual) approved Emergency Shutoff and Firesafe Valves Figure 107 are manual assemblies consisting of the JAMESBURY FIRE-TITE
Shearseal Knife Gate Valves. Manufactured by TSE
Shearseal Knife Gate Valves Manufactured by TSE Shearseal Design Most knife gate valve manufacturers describe their valve as rugged and dependable. In the Shearseal Valve, these qualities are not idle
Wey Knife Gate Valve Options & Accessories
Wey Knife Gate Valve Options & Accessories Wey Valve offers a large variety of actuation, controls and accessories along with it s high performance knife gate valves. Due to servicing a wide range of industries
UNI-DIRECTIONAL KNIFE GATE VALVE
UNI-DIRECTIONAL KNIFE GATE VALVE The MU-CYL model knife gate is a Uni-directional valve, equipped with automatic or manual driver, that by its loose elastomeric clamping ring design (tight version) ensures
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48
SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48 509-110 R6 OCT 2018 REPLACEABLE 0-RINGS Triple O-ring sealed with upper two O-rings replaceable with the valve fully open and subjected to the
SECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
SECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES DESCRIPTION STANDARD COMPLIANCE/CERTIFICATIONS S-2 ADVANTAGES S-3 PAGE SOFT SEAT EXPLODED VIEW S-4 FIRE SAFE SEAT EXPLODED VIEW S-5 METAL SEAT
High Pressure 2-way 2 1/2-6 Globe Valves
Overview Datasheet High Pressure 2-way 2 1/2-6 Globe Valves Designed to work with either an electronic actuator with a 3/4-inch (20 mm) or 1-1/2-inch (40 mm) stroke, the two-way globe valves are available
KNIFE GATE VALVES -- MODEL A
PRODUCT DESCRIPTION Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. Several seat
Stainless Steel / Iron Valve ISO 9001
CAST IRON GATE VALVE CLASS 125 NON-RISING STEM. (N.R.S.) STEM: SS410 (BRASS / SS304) MODEL: CI-12N (CI-12N/CI-2NS) CAST IRON GATE VALVE CLASS 125 OUTSIDE SCREW AND YOKE. STEM: SS410 (BRASS / SS304) MODEL:
WAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH
SECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly
SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
KVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
SECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS. Standard Compliance/Certifications S-2 Advantages S-3
SECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS DESCRIPTION Standard Compliance/Certifications S-2 Advantages S-3 PAGE Soft Seat Exploded View S-4 Fire Safe Seat Exploded
Mark 675 Series. Pressure Regulators Mark 675 Pressure Regulators. Self-Operated Pressure Regulators. Mark 675 Features
Mark 675 Series Self-Operated Pressure Regulators The Mark 675 Wafer Style Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint. The spring in the Mark
SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
Keystone Figures 310/312 K-LOK Butterfly Valves
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,
Diaphragm Valves. Product information
Diaphragm Valves Product information ART 510 Diaphragm Valve Weir Type Features Screwed BSP Taper Ductile Iron Body Rising Handwheel Indicator Bonnet Diaphragm Available Grade A - Natural Rubber Grade
BUTTERFLY VALVES Resilient Seated
General Purpose Butterfly Valves 141 Series & 145 Series Item Description Material 1 Body Ductile Iron ASTM A536 (65-45-12) 2 Seat 3 Shaft 4 Disc AVAILABLE OPTIONS 10 Position Handle Gear Operator Infinite
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly
Lead-free valves for potable water systems. Rev 02/17
Lead-free valves for potable water systems. Rev 02/17 UltraPure for purer water. The new standard. Senate law S.3874 was passed January 4, 2011 and is effective January 4, 2014. The law regulates lead
SB Series Wafer/Lug Butterfly Valves
SB Series Wafer/Lug Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 ABOUT PRATT INDUSTRIAL Pratt Industrial specializes in the design, engineering, and worldwide distribution
SECTION MISCELLANEOUS VALVES
SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2
2"- 20" (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company
butterfly valves resilient seated series 30/31 Wafer/Lug 2"- 20" (50mm-500mm) The High Performance Company SERIES 30 2" 20" (50mm 500mm) Bray Controls is proud to offer a high quality line of butterfly
Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI