CX C-SERIES HYDRAULIC EXCAVATORS CX210C I CX210C LONG REACH I CX250C I CX250C LONG REACH

Transcription

1 X -SRIS HYRULI XVTORS X210 I X210 LONG RH I X250 I X250 LONG RH

2 X -SRIS HYRULI XVTORS X210 I X250 lean power ase Series excavators use clean and effi cient Tier 4 interim diesel engines. quipped with ooled xhaust Gas Recirculation (GR) and a diesel particulate fi lter, the engine is capable of meeting emissions regulations without the need for additional diesel exhaust fl uids. utomatic self-regeneration of the iesel Particulate iffusor (P) ensures no loss of productivity, while low engine rpm, improved hydraulic pump control and fi ve new energy saving systems boost fuel economy by up to 10%. green economy gauge can be activated in the cab to inform the operator of the most economical operating mode setting for the machine, reporting fuel consumption in real-time. 2

3 3

4 X -SRIS HYRULI XVTORS X210 I X250 dvanced energy management Through the use of 5 new fuel saving functions, series excavators speed up productivity and substantially. improve fuel economy The new systems include: oom conomy ontrol () Increased fuel effi ciency during boom lower and swing operations. utomatic conomy ontrol () Improved fuel effi ciency when servo joysticks are in neutral position and the operator is not calling for power from the machine. Swing Relief ontrol (SW) arefully manages the hydraulic power distribution at slewing operations, to provide the most effi cient fl ow and pressure. Spool Stroke ontrol (SS) reates an automatic pressure adjustment during digging and leveling operations. It saves fuel, while improving controllability for the operator in fi ne digging operations. Idle functions: ll -series excavators also feature uto Idle and Idle Shut own systems. When activated, uto Idle automatically lowers engine revs, whatever the throttle position, when the levers have been inactive for 5 seconds. Manually, Idle can be activated by a switch on the joystick. Idle shut down, when activated, shuts down the engine when there has been no activity for 3 minutes, resulting in additional fuel savings. 4

5 Increased productivity s part of the ase Intelligent Hydraulic System all ase Series excavators benefi t from improvements in performance and productivity. Lifting capacity is increased and cycle times have been cut. Individual operating weights are slightly increased to cope with the additional digging and loading forces, ensuring stable, consistent high production for the customer. ucket and boom down regeneration systems feed hydraulic oil back to the supply side of the pump, reducing the requirement for engine power. The Series excavators use the familiar working mode control from the Series machines, making it easy for the operator to become familiar with the new models. The Super Power Mode provides a 5% boost when required for maximum digging ability. The new monitor in the Series machines provides operators with the chance to pre-programme auxiliary hydraulic fl ow and pressure settings (option) for up to 10 attachments, providing rapid changeover and increased productivity. 5

6 X -SRIS HYRULI XVTORS X210 I X250 Tier 4 interim: lower consumption, top durability The new Isuzu 4-cylinder engine meets P's Tier 4 interim without a need for additional diesel exhaust fl uid. The cooled exhaust gas recirculation (GR) in dual layer design effectively reduces NOx while PM is reduced by a diesel particulate fi lter (PF) in combination with the variable geometry turbocharger. diesel oxidation catalyst (O) treats carbon monoxide, hydrocarbons and other compounds. oth components are integrated in the P (iesel Particle iffusor). utomatic self regeneration speeds your productivity - you can go on working as usual without stopping for the regeneration process of the particle diffusor. Side by side coolers, intercooler and the fuel cooler are now even more effi cient thus further increasing our well appreciated durability. look under the hood immediately confi rms an extremely effi cient use of space: the engine, the cooling system and the exhaust system are all designed and grouped so as to take advantage of all the available space, while also granting excellent serviceability and operator visibility O gauge can be activated on the new multifunction screen to inform you instantly about the key parameters concerning fuel economy and fuel consumption. Low engine rpm in combination with further improved pump torque control and further 5 new energy saving systems reduces the fuel consumption further by up to 10%. 6

7 First class serviceability ll fi lters and regular fi ll points are grouped for easy access, with engine oil change intervals set at 500 hours. synthetic fi lter is used for the hydraulic oil, providing 5,000 hour intervals, and all pins and bushes (except the bucket pin) use the ase xtended Maintenance System bushings, allowing greasing intervals of up to 1,000 hours. The radiator and cooler cores are mounted side by side, to allow easy access for cleaning and more effi cient cooling. 100 litre/min refuelling pump with automatic cut off is provided as standard, reducing downtime for regular fi lls. The Japanese-built ase excavators boast an enviable reputation for reliability and durability, which looks set to continue with the new Series of X class crawler excavators. 7

8 X -SRIS HYRULI XVTORS X210 I X250 First class operator environment The Series cab is 7% larger than the previous models and uses a smaller top beam and no overlap in the front windows to offer improved all round visibility. Noise levels are reduced to almost automotive standards, around 70d(), while the operator has a suspension seat and fully adjustable levers as standard. Travel pedals require less effort, reducing fatigue for the operator. The ROPS/FOPS level 1certifi ed cab sits on new suspension mounts. To reduces vibration for the operator and contributes to the lower internal noise levels. The cab has a powerful air conditioning system with 25% more airfl ow and an 8% increase in performance. New mirrors and a standard rear view camera, with optional side camera, improved 178 mm L monitor inside the cab, providing the operator with a safe and secure working environment. 8

9 Full colour multifunction monitor The standard 178 mm L monitor provides all of the information that the operator needs at a glance. asy to use buttons guide the operator through the screen functions and the monitor can be split to show the standard rear view, and optional side view camera images. Information includes working mode, travel speed, working lights, attachment choice, time and working hours, along with system data such as coolant and hydraulic oil temperatures, fuel level and the condition of the particulate fi lter and the autoregeneration function. When selected, the O gauge displays the function of the various energy saving systems, allowing the operator to maximise effi ciency and save fuel. The monitor can be set to work in one of 20 languages, and is also used by service technicians to access onboard diagnostic functions. 9

10 TLMTIS The Science it The ase SiteWatch telematics system uses a high-tech control unit mounted on each machine to collate information from that machine and from GPS satellites. This data is then sent wirelessly through the mobile communication networks to the ase Telematics Web Portal. 10

11 SiteWatch: entralised Fleet ontrol enefits t Your Fingertips Measure your true asset availability and optimise it liminate the phantom fl eet : SiteWatch allows to identify spare units or under loaded machines on each site. ecome able to reallocate units where they are more needed. Forward Maintenance Planning is easier since the actualised working hours are always available. xtend the benefi ts of SiteWatch to the rest of your fl eet: SiteWatch can be installed on the units of other brands as well. hallenge your Total ost of Ownership! eing able to compare the fuel usage of different machine types will allow you choose the right equipment. Save on transport costs with planned and grouped maintenance tasks. Peace of mind, optimised uptime and lower repair costs: with preventive maintenance you can for example be alerted if the engine needs to be serviced and avoid a disruptive breakdown. e able to compare your asset Return On Investment on different sites. Your equipment is used only during working hours. You can set up alerts so that you know if it is in use during the weekend or at night. Integrate with the programmed maintenance package, so that you can be sure every machine is at the right place at the right time. More Safety, Lower Insurance Premium Keep thieves away: dissuade them from attacking your asset because it is geo-localised. SiteWatch is hidden so that thieves can t fi nd it quickly. Your fl eet is used only where you decide. You can defi ne a virtual fence and receive an when a machine exits that perimeter. 11

12 X -SRIS HYRULI XVTORS X210 12

13 13

14 X -SRIS HYRULI XVTORS X210 Specifications ngine Model ISUZU M-4HK1X Type Water-cooled, 4-cycle diesel, 4-cylinder in line, lectronically controlled, high pressure common rail system, variable geometry turbocharger, air cooled intercooler, dual exhaust gas recirculation, P system with auto-regeneration. Tier 4 interim certifi ed. Number of cylinders/displacement 4/5.19 l ore/stroke 115 x 125 mm Horsepower ISO kw/160 hp at 1800 min -1 Maximum torque ISO Nm at 1500 min -1 Hydraulic system Max oil fl ow 2 x min -1 2 variable displacement axial piston pumps with regulating system Working circuit pressure oom/rm/ucket 34.3 MPa oom/rm/ucket (with auto power up) 36.8 MPa Swing circuit 29.4 MPa Travel 34.3 Mpa Swing Maximum swing speed 11.5 min -1 Travel Travel motor Variable displacement axial piston motor Max travel speed 5.6 km/h (utomatic travel speed shifting) Low travel speed 3.4 km/h Gradeability 70% (35 ) rawbar pull 188 kn lectrical system ircuit 24V lternator 50 mp Undercarriage Number of carriers rollers (each side) 2 Number of track rollers (each side) 8 Number of shoes (each side) 49 Type of shoe Triple grouser shoe apacities Fuel tank 320 l Hydraulic system 220 l ooling system 30.8 l 14 Weight and ground pressure With 2.40 m rm, 1.0 m 3 bucket, operator, lubricant, coolant, full fuel tank and top guard OPG level 2 X210 Weight (kg) Ground pressure (MPa) 500 mm grouser shoe mm grouser shoe mm grouser shoe mm grouser shoe With 2.40 m rm, 1.0 m 3 bucket, operator, lubricant, coolant, full fuel tank and top guard OPG level 2 X210 NL Mono Weight (kg) Ground pressure (MPa) 500 mm grouser shoe mm grouser shoe With 2.40 m rm, 1.0 m 3 bucket, operator, lubricant, coolant, full fuel tank and top guard OPG level 2 X210 NL 2P boom Weight (kg) Ground pressure (MPa) 500 mm grouser shoe mm grouser shoe With 6.40 m rm, 0.37 m 3 ucket, operator, lubricant, coolant, full fuel tank and top guard OPG level 2 X210 long reach Weight (kg) Ground pressure (MPa) 800 mm grouser shoe

15 General dimensions Monoboom G F I K H J F G H I J I J K Overall length (without attachment) Overall length (with attachment) Overall height (with attachment) ab height Upper structure overall width Swing (rear end) radius learance height under upper structure Minimum ground clearance Wheel base (enter to center of wheels) rawler overall length Track gauge Undercarriage overall width (with 500 mm shoes) Track gauge NL Undercarriage NL overall width (with 500 mm shoes) rawler tracks height rm 2.40 m rm H 1.90 m rm 2.94 m 4960 mm 4960 mm 4960 mm 9460 mm 9490 mm 9380 mm 3200 mm 3110 mm 3000 mm 3070 mm 3070 mm 3070 mm 2770 mm 2770 mm 2770 mm 2750 mm 2750 mm 2750 mm 1040 mm 1040 mm 1040 mm 440 mm 440 mm 440 mm 3660 mm 3660 mm 3660 mm 4470 mm 4470 mm 4470 mm 2390 mm 2390 mm 2390 mm 2990 mm 2990 mm 2990 mm 1990 mm 1990 mm 1990 mm 2490 mm 2490mm 2490 mm 920 mm 920 mm 920 mm NL 2 Piece boom F K G I H J rm 1,90 m rm 2,40 m rm 2,94 m Overall length (without attachment) 5060 mm 5060 mm 5060 mm Overall length (with attachment) 9570 mm 9540 mm 9480 mm Overall height (with attachment) 3100 mm 3100 mm 3100 mm ab height 3100 mm 3100 mm 3100 mm Upper structure overall width 2540 mm 2540 mm 2540 mm Swing (rear end) radius 2830 mm 2830 mm 2830 mm learance height under upper structure 1060 mm 1060 mm 1060 mm F Minimum ground clearance 430 mm 430 mm 430 mm G Wheel base (enter to center of wheels) 3660 mm 3660 mm 3600 mm H rawler overall length 4470 mm 4470 mm 4470 mm I Track gauge NL 1990 mm 1990 mm 1990 mm J Undercarriage NL overall width (with 500 mm shoes) 2490 mm 2490 mm 2490 mm K rawler tracks height 920 mm 920 mm 920 mm 15

16 Performance data 10 m Monoboom 11 m NL 2 Piece boom m m Monoboom oom length ucket radius ucket wrist action Maximum reach at GRP Maximum reach Max. digging depth Max. digging height Max. dumping height rm 2.40 m rm H 1.90 m rm 2.94 m 5700 mm 5700 mm 5700 mm 1450 mm 1450 mm 1450 mm mm 8770 mm 9730 mm 9420 mm 8960 mm 9900 mm 6110 mm 5610 mm 6650 mm 9390 mm 9140 mm 9610 mm 6590 mm 6330 mm 6810 mm NL 2 Piece boom oom length ucket radius ucket wrist action rm 1,90 m rm 2,40 m rm 2,94 m 5670 mm 5670 mm 5670 mm 1450 mm 1450 mm 1450 mm Maximum reach at GRP 8750 mm 9220 mm 9720 mm Maximum reach 8950 mm 9420 mm 9900 mm Max. digging depth 5310 mm 5800 mm 6320 mm Max. digging height mm mm mm Max. dumping height 7320 mm 7680mm 8040 mm igging force With 1.0 m 3 bucket (ISO 6015) rm digging force - with auto power boost ucket digging force - with auto power boost rm 2.40 m rm H 1.90 m rm 2.94 m 123 kn 142 kn 103 kn 132 kn 152 kn 110 kn 142 kn 142 kn 142 kn 152 kn 152 kn 152 kn 16

17 Lifting capacity Front RH 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m t max reach 360 Standard arm m arm length, 0.90 m 3 bucket, 600G L shoes, max reach 9.56 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 m -1.5 m -3.0 m -4.5 m 2890* 2890* 2200* 2200* 3850* * 2090* 4670* 4670* 4400* * * 2080* 10330* 10330* 7550* * * * * 8430* 9390* * * * 8130* 10380* * * 7390* 10600* 10600* 10540* * * 9790* 14530* * * * 13770* 13230* 12980* 9110* * * 3610 Short arm m arm length, 1.00 m 3 bucket, 600G L shoes, max reach 9.08 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 m -1.5 m -3.0 m -4.5 m 3440* 3440* 3260* 3260* 4570* 4570* 4230* * * 6220* 5140* 4840* 4740* * * * * * * * * 7350* 10510* * 7900* 10930* 10930* 10470* * 11060* 14460* 13050* 9930* * 11890* 8320* SP Short arm m arm length, 1.00 m 3 bucket, 600G L shoes, max reach 8.62 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 m -1.5 m -3.0 m -4.5 m 4590* 4590* 4030* 4030* 4870* 4870* 4580* * * 6930* 5600* * * * * * * 11630* 10440* * * * * 10500* 7410* * 5370 NL 2 PI OOM Short arm m arm length, 1.00 m 3 bucket Kg, L 500G mm shoes, max reach 9.42 m 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 m -1.5 m -3.0 m -4.5 m 3770* 3770* 3800* 3800* 3690* 3690* 4570* 4570* 3280* * 5980* 4880* 4580* 3940* * * 9780* 6940* * * * * 13470* 13970* 12160* 9140* * 4460* 4510* * * * 9860* 14560* 12000* 10270* * * * * * 11340* 11770* 11770* 16140* * * * 14660* 16700* 16700* 16480* * * * 17220* 24260* 24260* 16290* * * * 25970* 13060* * 5590 NL 2 PI OOM Short arm m arm length, 1.00 m 3 bucket Kg, L 500G mm shoes, max reach 8.95 m 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 m -1.5 m -3.0 m -4.5 m 4500* 4500* 5640* 5640* 4870* * * 6460* 5050* * * * 11410* 7580* 6870* 550* * * * 13510* 14010* * * * * * * * * 12370* 16510* * * * 15060* 19540* 19540* 16590* * * * * 17500* 29370* 29370* 15960* * * * * 10400* NL 2 PI OOM Short arm m arm length, 0.90 m 3 bucket Kg, L 500G mm shoes, max reach 9.90 m 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 m -1.5 m -3.0 m -4.5 m 2060* 2060* 3070* 3070* 2520* 2520* 4150* 4150* 2990* 2990* 2210* 2210* 4620* * * 2090* 4380* 4380* 6220* 6220* 4890* * * * * 16810* 13100* * * * * * * 16860* 14540* * * * * * * 9870* 11860* 11860* 15760* * * * * 12120* 14470* 14470* 16400* * * * 15530* 19480* 19480* 16500* * * * * 14980* 23120* 23120* 15030* * * * 3260 * Hydraulic capacity 87% m

18 X -SRIS HYRULI XVTORS X210 LONG RH General dimensions H I F G J K L F G H I J K L Overall length (without attachment) Overall length (with attachment) Overall height (with attachment) ab height Upper structure overall width Swing (rear end radius) learance height under upper structure Minimum ground clearance Wheel base (enter to center of wheels) rawler overall length Track gauge Undercarriage overall width (with 800 mm shoes) rawler tracks height rm 6.40 m 4960 mm mm 3070 mm 3070 mm 2770 mm 2750 mm 1040 mm 440 mm 3660 mm 4470 mm 2390 mm 3190 mm 920 mm 18

19 Performance data 13 m oom length ucket radius ucket wrist action Maximum reach at GRP Maximum reach Max. digging depth Max. digging height Max. dumping height rm digging force ucket digging force rm 6.40 m 8700 mm 1200 mm mm mm mm mm mm 46 kn 65 kn m m Lifting capacity Front 360 RH 0.0 m 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m t max reach m Super long arm m arm length, 0.37 m 3 bucket, 800G shoes, max reach m 12.0 m 10.5 m 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 m -1.5 m -3.0 m -4.5 m -6.0 m -7.5 m -9.0 m m 950* 950* 1520* 1520* 880* 880* 1690* 1690* 990* 990* 850* 850* 1760* 1760* 1680* * 830* 1870* 1870* 1840* * * 840* 2280* 2280* 2090* 2090* 1970* * * * 860* 5330* 5330* 3470* 3470* 3770* 3770* 3110* 3110* 2680* 2680* 2380* * * * * * 3100* 6710* 6710* 4700* * * * * * * * 1100* 2320* 2320* 5800* 5800* 5500* * * * * * 1750* 1830* 1830* 2700* 2700* 4870* 4870* 6060* * * * 2310* 2520* 2520* 3250* 3250* 5000* 5000* * * 2930* 3190* 3190* 3890* 3890* 550* * * 3470* 3840* 3840* 4660* 4660* 6400* * * 4020* 4780* 4780* 5790* 5790* 7770* * * 5630* 7140* 7140* 7330* * * * * 8280* 6010* 6010* 4600* * * * Hydraulic capacity 87% 19

20 X -SRIS HYRULI XVTORS X250 20

21 21

22 X -SRIS HYRULI XVTORS X250 Specifications ngine Model ISUZU L-4HK1X Type Water-cooled, 4-cycle diesel, 4-cylinder in line, lectronically controlled, high pressure common rail system, variable geometry turbocharger, air cooled intercooler, dual exhaust gas recirculation, P system with auto-regeneration. Tier 4 interim certifi ed. Number of cylinders/displacement 4/5.19 l ore/stroke 115 x 125 mm Horsepower 80/1269/ min -1 Maximum torque 80/1269/ min -1 Hydraulic system Max oil fl ow 2 x min -1 2 variable displacement axial piston pumps with regulating system oom/rm/ucket 36.8 MPa Swing circuit 27/28.9 MPa Travel 34.3 Mpa Swing Maximum swing speed 10.6 rpm Travel Travel motor Variable displacement axial piston motor Max travel speed 5.5 km/h (utomatic travel speed shifting) Low travel speed 3.5 km/h Gradeability 70% (35 ) rawbar pull 201 kn lectrical system ircuit 24V lternator 50 mp Undercarriage Number of carriers rollers (each side) 2 Number of track rollers (each side) 9 Number of shoes (each side) 51 Type of shoe Triple grouser shoe ircuit and component capacities Fuel tank 410 l Hydraulic system 250 l ooling system 30.2 l Weight and ground pressure With 3.00 m rm, 1.1 m 3 bucket, operator, lubricant, coolant, full fuel tank and top guard OPG level 2 X250 L Weight (kg) Ground pressure (MPa) 600 mm grouser shoe mm grouser shoe mm grouser shoe mm grouser shoe X250 NL Weight (kg) Ground pressure (MPa) 600 mm grouser shoe mm grouser shoe With 8.00 m arm, 0.37m³ bucket, operator, lubricant, coolant, full fuel tank and top guard OPG level 2 X250 L long reach Weight (kg) Ground pressure (MPa) 800 mm grouser shoe

23 General dimensions With 5.85 m standard boom X250 H I F L G J K L / NL rm 3.00 m rm H 2.50 m rm 3.52 m F G H I L Overall length (without attachment) Overall length (with attachment) Overall height (with attachment) ab height Upper structure overall width Swing (rear end radius) learance height under upper structure Minimum ground clearance Wheel base (enter to center of wheels) rawler overall length rawler tracks height 5270 mm 5270 mm 5270 mm 9880 mm 9950 mm 9910 mm 3200 mm 3350 mm 3360 mm 3130 mm 3130 mm 3130 mm 2770 mm 2770 mm 2770 mm 2950 mm 2950 mm 2950 mm 1100 mm 1100 mm 1100 mm 460 mm 460 mm 460 mm 3840 mm 3840 mm 3840 mm 4650 mm 4650 mm 4650 mm 940 mm 940 mm 940 mm L rm 3.00 m rm H 2.50 m rm 3.52 m J K Track gauge Undercarriage overall width (with 600 mm shoes) 2590 mm 2590 mm 2590 mm 3190 mm 3190 mm 3190 mm NL rm 3.00 m rm H 2.50 m rm 3.52 m J Track gauge 2390 mm 2390 mm 2390 mm K Undercarriage overall width 2990 mm 2990 mm 2990 mm (with 600 mm shoes) 23

24 X250 X -SRIS HYRULI XVTORS X250 Performance data With 5.85 m standard boom L / NL rm 3.00 m rm H 2.50 m rm 3.52 m oom length ucket radius ucket wrist action Maximum reach at GRP Maximum reach Max. digging depth Max. digging height Max. dumping height rm digging force - with auto power up ucket digging force - with auto power up 5850 mm 5850 mm 5850 mm 1570 mm 1570 mm 1570 mm mm 9630 mm mm mm 9820 mm mm 6900 mm 6400 mm 7420 mm 9760 mm 9560 mm mm 6760 mm 6550 mm 7060 mm 120 kn 141 kn 107 kn 129 kn 151 kn 115 kn 162 kn 162 kn 162 kn 174 kn 174 kn 174 kn 10 m m Lifting capacity RH Front 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m t max reach m L - Standard arm. 2.5 m H arm length, 1.30 m 3 bucket, 600G shoes, max reach 9.46 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 m -1.5 m -3.0 m -4.5 m 4130 * 4130 * 3430 * 3430 * 5330 * * 3260 * 6270 * 6270 * 6650 * * * * * * * * * * * 8500 * * * * 9640 * * * * * * * * * * * * * * * * * NL - Standard arm. 2.5 m H arm length, 1.30 m 3 bucket, 600G shoes, max reach 9.46 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 m -1.5 m -3.0 m -4.5 m 4130 * 4130 * 3430 * 3430 * 5330 * * * 6270 * 6650 * * * * * * * * * 2480 * * * * 8500 * * * * 9640 * * * * * * * * * * * * * * * *

25 Front RH 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m t max reach 360 L - Standard arm. 3.0 m arm length, 1.11 m 3 bucket, 600G shoes, max reach 9.92 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 m -1.5 m -3.0 m -4.5 m -6.0 m 4150 * 4150 * 2370 * 2370 * 4800 * * 2830 * 2250 * 2250 * 6180 * 6180 * 5640 * * * 2230 * * * 9720 * * * * * 9390 * * * * 2430 * 9250 * 9250 * * * * 8880 * * * * * * * * * * * * * * * * * * * * * 8430 * 8430 * 6020 * 6020 * m NL - Standard arm. 3.0 m arm length, 1.11 m 3 bucket, 600G shoes, max reach 9.92 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 m -1.5 m -3.0 m -4.5 m -6.0 m 4150 * 4150 * 2370 * 2370 * 4800 * * 2830 * 2250 * 2250 * 6180 * 5950 * 5640 * * * 2230 * * * 9720 * * * * 2290 * 9390 * 9390 * * * * * 9250 * * * * 8880 * * * * * * * * * * * * * * * * * * * 8430 * * 6020 * L - Standard arm. 3.5 m arm length, 1.00 m 3 bucket, 600G shoes, max reach 10.4 m 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 m -1.5 m -3.0 m -4.5 m -6.0 m 2240 * 2240 * 2120 * 2120 * 3300 * 3300 * 1890 * 1890 * 4330 * 4330 * 3490 * * 1790 * 5160 * * 1770 * 8770 * 8770 * 6910 * * * 1820 * * * * * * 1920 * 4270 * 4270 * 9690 * 9690 * * * 2100 * 7650 * 7650 * * * * 2400 * 9810 * 9810 * * * * * 2900 * * * * * * * * * NL - Standard arm. 3.5 m arm length, 1.00 m 3 bucket, 600G shoes, max reach 10.4 m 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 m -1.5 m -3.0 m -4.5 m -6.0 m 2240 * 2240 * 2120 * 2120 * 3300 * 3300 * 1890 * 1890 * 4330 * 4250 * 3490 * * 1790 * 5160 * * 1770 * 8770 * 8770 * 6910 * * * 1820 * * * * * * 1920 * 4270 * 4270 * 9690 * 9690 * * * 2100 * 7650 * 7650 * * * * * 9810 * * * * * * * * * * * * * 4740 * Hydraulic capacity 87%

26 X -SRIS HYRULI XVTORS X250 LONG RH General dimensions H I F G J K L F G H I J K L Overall length (without attachment) Overall length (with attachment) Overall height (with attachment) ab height Upper structure overall width Swing (rear end radius) learance height under upper structure Minimum ground clearance Wheel base (enter to center of wheels) rawler overall length Track gauge Undercarriage overall width (with 800 mm shoes) rawler tracks height rm 8.00 m 5270 mm mm 3130 mm 3130 mm 2770 mm 2950 mm 1100 mm 460 mm 3840 mm 4650 mm 2590 mm 3390 mm 940 mm 26

27 Performance data oom length ucket radius ucket wrist action Maximum reach at GRP Maximum reach Max. digging depth Max. digging height Max. dumping height rm digging force ucket digging force rm 8.00 m mm 1200 mm mm mm mm mm mm 40.3 kn 77.0 kn 14 m m Lifting capacity Front 360 RH 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m 16.5 m 18.0 m t max reach m Super long arm. 8.0 m arm length, 0.37 m 3 bucket, 800G shoes, max reach 18.0 m 12.0 m 10.5 m 9.0 m 7.5 m 6.0 m 4.5 m 3.0 m 1.5 m 0 m -1.5 m -3.0 m -4.5 m -6.0 m -7.5 m -9.0 m m m m 1270* 1270* 1600* 1600* 1240* 1240* 1640* 1640* 1670* 1670* 1370* 1370* 1230* 1230* 1710* 1710* 1710* 1710* 1660* * 1240* 1830* 1830* 1780* 1760* 1740* * * 2130* 1990* 1990* 1880* * * * 3820* 3070* 3070* 2490* 2490* 3620* 3620* 3070* 3070* 2680* 2680* 2390* 2390* 2170* * * * * * 1990* 7430* 7430* 5560* 5560* 4290* 4290* 3520* 3520* 3010* 2910* 2640* * * * * * * 660* 1500* 1500* 3680* 3680* 6480* * * * * * * * * 1190* 1770* 1770* 3180* 3180* 6300* * * * * * * 1670* 2190* 2190* 3320* 3320* 5570* * * * * 2170* 2690* 2690* 3670* 3670* 5590* * * 2690* 3220* 3220* 4160* 4160* 5980* * 3240* 3760* 3760* 4770* 4770* 6640* * 3840* 4490* 490* 5620* 5620* 7310* * * 4550* 5380* 5380* 6750* 6750* 6820* * * * * * 6440* 7740* 7740* 6040* * * * * * 4820* 3840* 3840* 3140* 3140* * Hydraulic capacity 87% 27

28 Standard quipment X210 NGIN Isuzu 4-cylinder turbodiesel in line ertified Tier 4 interim (GR) lectronic fuel injection High pressure common rail system Variable geometry turbo charger ooled xhaust Gas Recirculation (GR) iesel Particulate iffuser (P) (iesel Oxydation atalyst O + iesel Particulate Filter PF) Neutral safety start uto-engine warm up, emergency stop Glow-plug pre-heat Idle System: uto-idle One-touch idle Idle shut-down PF (ngine Protection Feature) Optional quipment X210 / X210 LONG RH HYRULIS uxiliary Hydraulics - Single acting breaker circuit Multifunction circuit w pressure control Low-flow circuit Standard quipment X250 NGIN Isuzu 4-cylinder turbodiesel in line ertified Tier 4 interim (GR) lectronic fuel injection High pressure common rail system Variable geometry turbo charger ooled xhaust Gas Recirculation (GR) iesel Particulate iffuser (P) (iesel Oxydation atalyst O + iesel Particulate Filter PF) Neutral safety start uto-engine warm up, emergency stop Glow-plug pre-heat Idle System: uto-idle One-touch idle Idle shut-down PF (ngine Protection Feature) ual-stage fuel filtration ual element air filter Remote oil filter Green plug oil drain 500-hour engine oil change interval Refuelling Pump HYRULIS uto power boost uto swing priority uto travel speed change Selectable work modes Overload warning device SW - SWING RLIF ONTROL SS - SPOOL STROK ONTROL - OOM ONOMY ONTROL - UTO ONOMY ONTROL S - SWING ONOMY ONTROL ISO pattern controls Pre-set auxiliary pump settings Optional quipment X250 / X250 LONG RH HYRULIS uxiliary Hydraulics - Single acting breaker circuit Multifunction circuit w pressure control Low-flow circuit ual-stage fuel filtration ual element air filter Remote oil filter Green plug oil drain 500-hour engine oil change interval Refuelling Pump HYRULIS uto power boost uto swing priority uto travel speed change Selectable work modes Overload warning device SW - SWING RLIF ONTROL SS - SPOOL STROK ONTROL - OOM ONOMY ONTROL - UTO ONOMY ONTROL S - SWING ONOMY ONTROL ISO pattern controls Pre-set auxiliary pump settings TTHMNTS Long Reach boom and arm rm m H / 2.94 m Hydr. or mech quickcoupler uckets: xtreme / Heavy duty / GP/ ditching TTHMNTS Long Reach boom and arm oom 5.85 m H rm m / 3.52 m rm Heavy uty m / 3.00 m Switch controlled auxiliary selection 10 x auxiliary flow settings in memory uxiliary valve uxiliary pipe brackets 5,000 hour hydraulic oil change interval 1,000 hour hydraulic filter change interval Hydraulic track adjustment SHR brake UPPRSTRUTUR 4-point isolation mounted cab (fluid and spring) ommon key vandal locks Swivel guard belly pan Rear view safety camera TTHMNTS Standard boom 5.70 m Hammers, shears, grapples OPRTOR STTION Front cab guard - vertical bars (OPG level 2) Front cab guard - vertical bars Switch controlled auxiliary selection 10 x auxiliary flow settings in memory uxiliary valve uxiliary pipe brackets 5,000 hour hydraulic oil change interval 1,000 hour hydraulic filter change interval Hydraulic track adjustment SHR brake UPPRSTRUTUR 4-point isolation mounted cab (fluid and spring) ommon key vandal locks Swivel guard belly pan Rear view safety camera TTHMNTS Standard boom 5.85 m rm 3.00 m Hydr. or mech quickcoupler uckets: xtreme / Heavy duty / GP / ditching Hammers, shears, grapples OPRTOR STTION Front cab guard - vertical bars rm H 2.40 m MS bushings ucket linkage with hook oom mounted work light (70 watt) uxiliary pipe brackets entralized lube bank ttachment cushion valve rm and boom regeneration Safety valves on boom and arm cylinders with overload warning device OPRTOR STTION Interior dome light (10W) ROPS/FOPS level 1 cab FOPS guard OPG level II on cab roof Pressurized cab Tempered safety glass One-touch lock front window Sun visor & rain defl ector (OPG level 1) Front mesh screen M/FM radio w/ antenna and 2-speakers Side-view camera UPPRSTRUTUR MS bushings ucket linkage with hook oom mounted work light (70 watt) uxiliary pipe brackets entralized lube bank ttachment cushion valve rm and boom regeneration Safety valves on boom and arm cylinders with overload warning device OPRTOR STTION Interior dome light (10W) ROPS/FOPS level 1 cab FOPS guard OPG level II on cab roof Pressurized cab Tempered safety glass One-touch lock front window Sun visor & rain defl ector /heat/defrost w/ auto climate control (OPG level 2) Front cab guard - vertical bars (OPG level 1) Front mesh screen M/FM radio w/ antenna and 2-speakers /heat/defrost w/ auto climate control Hot & coolbox, cup holder & ashtray Interior dome light loth covered air-suspension seat Seat-belt djustable armrests Tilting consoles - 4-position Low-effort controls (short) Sliding cockpit (180 mm) ontrols pre-wired for auxiliary uxiliary select system Straight travel ux-in port for personal electronics Multifunction color monitor Rear-view camera nti-theft system (start code system) Rubber fl oormat uto centralized greasing system Rubber bumper guard (order through Service Parts) UNRRRIG Steel shoes, triple semi-grouser Hot & coolbox, cup holder & ashtray Interior dome light loth covered air-suspension seat Seat-belt djustable armrests Tilting consoles - 4-position Low-effort controls (short) Sliding cockpit (180 mm) ontrols pre-wired for auxiliary uxiliary select system Straight travel ux-in port for personal electronics Multifunction color monitor Rear-view camera nti-theft system (start code system) Rubber fl oormat 12-volt electric socket 24-volt cigarette lighter One-piece right hand window Side-view camera UPPRSTRUTUR uto centralized greasing system Rubber bumper guard (order through Service Parts) 12-volt electric socket 24-volt cigarette lighter One-piece right hand window 2 internal & 3 external view mirrors 2 working lights (boom & upperstructure) eacon harness 2 cab top working lights Windshield wiper / washer lear (Lexan) roof window w/ sunshade Storage compartments On-board diagnostic system UNRRRIG 600 mm steel shoes, triple semigrouser Struttled and sealed link Full overlap turntable bearing tub Single track guide 700 mm, 800mm 900 mm steeltracks for swamp only, 600mm rubber link chains Triple track guide High ambient heat package (Tropical Package) 2 internal & 3 external view mirrors 2 working lights (boom & upperstructure) eacon harnesss 2 cab top working lights Windshield wiper / washer lear (Lexan) roof window w/ sunshade Storage compartments On-board diagnostic system UNRRRIG 600 mm steel shoes, triple semigrouser Struttled and sealed link Full overlap turntable bearing tub Single track guide UNRRRIG Steel shoes, triple semi-grouser 700 mm Steel shoes, triple semi-grouser 800 mm, 900 mm (L only) Triple track guide Form No G - Printed in Italy - Mediaross Firenze - 03/14 Standard and optional equipment shown can vary by country. Hanlon ase Highlands ampton edford SG17 5NZ info@hanlon-case.co.uk ustomer ssistance The call is free from a land line. heck in advance with your Mobile Operator if you will be charged. NOT: Standard and optional fi ttings can vary according to the demands and specifi c regulations of each country. The illustrations may include optional rather than standard fi ttings - consult your ase dealer. Furthermore, NH reserves the right to modify machine specifi cations without incurring any obligation relating to such changes. onforms to directive 98/37/