CX C-SERIES HYDRAULIC EXCAVATORS CX130C I CX160C I CX180C

Transcription

1 CX C-SERIES HYDRAULIC EXCAVATORS CX130C I CX160C I CX180C

2 CX C-SERIES HYDRAULIC EXCAVATORS CX130C I CX160C I CX180C Clean power Case C Series excavators use clean and effi cient Tier 4 interim diesel engines. Equipped with Cooled Exhaust Gas Recirculation (CEGR) and a diesel particulate fi lter, the engine is capable of meeting emissions regulations without the need for additional diesel exhaust fl uids. Automatic self-regeneration of the Diesel Particulate Diffusor (DPD) ensures no loss of productivity, while low engine rpm, improved hydraulic pump control and fi ve new energy saving systems boost fuel economy by up to 15%. A green economy gauge can be activated in the cab to inform the operator of the most economical operating mode setting for the machine, reporting fuel consumption in real-time. 2

3 3

4 CX C-SERIES HYDRAULIC EXCAVATORS CX130C I CX160C I CX180C Advanced energy management Through the use of 5 new fuel saving functions, C series excavators speed up productivity and substantially. improve fuel economy The new systems include: Boom Economy Control (BEC) Increased fuel effi ciency during boom lower and swing operations. Automatic Economy Control (AEC) Improved fuel effi ciency when servo joysticks are in neutral position and the operator is not calling for power from the machine. Swing Relief Control (SWC) Carefully manages the hydraulic power distribution at slewing operations, to provide the most effi cient fl ow and pressure. Spool Stroke Control (SSC) Creates an automatic pressure adjustment during digging and leveling operations. It saves fuel, while improving controllability for the operator in fi ne digging operations. Idle functions: All C-series excavators also feature Auto Idle and Idle Shut Down systems. When activated, Auto Idle automatically lowers engine revs, whatever the throttle position, when the levers have been inactive for 5 seconds. Manually, Idle can be activated by a switch on the joystick. Idle shut down, when activated, shuts down the engine when there has been no activity for 3 minutes, resulting in additional fuel savings. 4

5 Increased productivity As part of the Case Intelligent Hydraulic System all Case C Series excavators benefi t from improvements in performance and productivity. Lifting capacity is increased and cycle times have been cut. Individual operating weights are slightly increased to cope with the additional digging and loading forces, ensuring stable, consistent high production for the customer. Bucket and boom down regeneration systems feed hydraulic oil back to the supply side of the pump, reducing the requirement for engine power. The C Series excavators use the familiar working mode control from the B Series machines, making it easy for the operator to become familiar with the new models. The Super Power Mode provides a 5% boost when required for maximum digging ability. The new monitor in the C Series machines provides operators with the chance to pre-programme auxiliary hydraulic fl ow and pressure settings (option) for up to 10 attachments, providing rapid changeover and increased productivity. 5

6 CX C-SERIES HYDRAULIC EXCAVATORS CX130C I CX160C I CX180C Tier 4 interim: lower consumption, top durability The new Isuzu 4-cylinder engine meets EPA s Tier 4 interim without a need for additional diesel exhaust fl uid. The cooled exhaust gas recirculation (CEGR) in dual layer design effectively reduces NOx while PM is reduced by a diesel particulate fi lter (DPF) in combination with the variable geometry turbocharger. A diesel oxidation catalyst (DOC) treats carbon monoxide, hydrocarbons and other compounds. Both components are integrated in the DPD (Diesel Particle Diffusor). Automatic self regeneration speeds your productivity - you can go on working as usual without stopping for the regeneration process of the particle diffusor. Side by side coolers, intercooler and the fuel cooler are now even more effi cient thus further increasing our well appreciated durability. A look under the hood immediately confi rms an extremely effi cient use of space: the engine, the cooling system and the exhaust system are all designed and grouped so as to take advantage of all the available space, while also granting excellent serviceability and operator visibility A ECO gauge can be activated on the new multifunction screen to inform you instantly about the key parameters concerning fuel economy and fuel consumption. Low engine rpm in combination with further improved pump torque control and further 5 new energy saving systems reduces the fuel consumption further by up to 10%. 6

7 First class serviceability All fi lters and regular fi ll points are grouped for easy access, with engine oil change intervals set at 500 hours. A synthetic fi lter is used for the hydraulic oil, providing 5,000 hour intervals, and all pins and bushes (except the bucket pin) use the Case Extended Maintenance System bushings, allowing greasing intervals of up to 1,000 hours. The radiator and cooler cores are mounted side by side, to allow easy access for cleaning and more effi cient cooling. A 100 litre/min refuelling pump with automatic cut off is provided as standard, reducing downtime for regular fi lls. The Japanese-built Case excavators boast an enviable reputation for reliability and durability, which looks set to continue with the new C Series of CX class crawler excavators. 7

8 CX C-SERIES HYDRAULIC EXCAVATORS CX130C I CX160C I CX180C First class operator environment The C Series cab is 7% larger than the previous models and uses a smaller top beam and no overlap in the front windows to offer improved all round visibility. Noise levels are reduced to almost automotive standards, around 70dB(A), while the operator has a suspension seat and fully adjustable levers as standard. Travel pedals require less effort, reducing fatigue for the operator. The ROPS/FOPS level 1certifi ed cab sits on new suspension mounts. To reduces vibration for the operator and contributes to the lower internal noise levels. The cab has a powerful air conditioning system with 25% more airfl ow and an 8% increase in performance. New mirrors and a standard rear view camera, with optional side camera, improved 178 mm LED monitor inside the cab, providing the operator with a safe and secure working environment. 8

9 Full colour multifunction monitor The standard 178 mm LED monitor provides all of the information that the operator needs at a glance. Easy to use buttons guide the operator through the screen functions and the monitor can be split to show the standard rear view, and optional side view camera images. Information includes working mode, travel speed, working lights, attachment choice, time and working hours, along with system data such as coolant and hydraulic oil temperatures, fuel level and the condition of the particulate fi lter and the auto-regeneration function. When selected, the ECO gauge displays the function of the various energy saving systems, allowing the operator to maximise effi ciency and save fuel. The monitor can be set to work in one of 20 languages, and is also used by service technicians to access onboard diagnostic functions. 9

10 TELEMATICS The Science Bit The Case SiteWatch telematics system uses a high-tech control unit mounted on each machine to collate information from that machine and from GPS satellites. This data is then sent wirelessly through the mobile communication networks to the Case Telematics Web Portal. 10

11 SiteWatch: Centralised Fleet Control Benefits At Your Fingertips Measure your true asset availability and optimise it Eliminate the phantom fl eet : SiteWatch allows to identify spare units or under loaded machines on each site. Become able to reallocate units where they are more needed. Forward Maintenance Planning is easier since the actualised working hours are always available. Extend the benefi ts of SiteWatch to the rest of your fl eet: SiteWatch can be installed on the units of other brands as well. Challenge your Total Cost of Ownership! Being able to compare the fuel usage of different machine types will allow you choose the right equipment. Save on transport costs with planned and grouped maintenance tasks. Peace of mind, optimised uptime and lower repair costs: with preventive maintenance you can for example be alerted if the engine needs to be serviced and avoid a disruptive breakdown. Be able to compare your asset Return On Investment on different sites. Your equipment is used only during working hours. You can set up alerts so that you know if it is in use during the weekend or at night. Integrate with the programmed maintenance package, so that you can be sure every machine is at the right place at the right time. More Safety, Lower Insurance Premium Keep thieves away: dissuade them from attacking your asset because it is geo-localised. SiteWatch is hidden so that thieves can t fi nd it quickly. Your fl eet is used only where you decide. You can defi ne a virtual fence and receive an when a machine exits that perimeter. 11

12 CX C-SERIES HYDRAULIC EXCAVATORS CX130C Specifications Engine Model Tier 4 interim certifi ed ISUZU AM-4JJ1X Type Water-cooled, 4-cycle diesel, 4-cylinder in line, High pressure common rail system (electric control), Turbocharger with air cooled intercooler, DPD system Number of cylinders 4 Bore/Stroke 95.4 x mm Horsepower ISO kw at 200in -1 Maximum torque ISO Nm at 160in -1 Hydraulic system Max oil fl ow 2 x in -1 2 variable displacement axial piston pumps with regulating system Working circuit pressure Boom/Arm/Bucket 34.3 MPa Boom/Arm/Bucket (with auto power up) 36.3 MPa Swing circuit 27.9 MPa Travel 34.3 Mpa Swing Maximum swing speed 14.3 min -1 Travel Travel motor Variable displacement axial piston motor Max travel speed 5.6 km/h (Automatic travel speed shifting) Low travel speed 3.4 km/h Gradeability 70% (35 ) Drawbar pull 116 kn Electrical system Alternator 50 Amp Undercarriage Number of carriers rollers (each side) 2 Number of track rollers (each side) 7 Number of shoes (each side) 47 Type of shoe Triple grouser shoe Capacities Fuel tank 260 l Hydraulic system 157 l Cooling system 16.2 l Weight and ground pressure With 2.5 Arm, 0.5 m 3 bucket, operator, lubricant, coolant, full fuel tank CX130C Weight (kg) Ground pressure (MPa) 60m grouser shoe CX130C BLADE Weight (kg) Ground pressure (MPa) 60m grouser shoe

13 General dimensions A D B C G H E F I J K A B C D E F G H I J K Overall length (without attachment) Overall length (with attachment) Overall height (with attachment) Cab height Upper structure overall width Swing (rear end) radius Clearance height under upper structure Minimum ground clearance Wheel base (Center to center of wheels) Crawler overall length Track gauge Undercarriage overall width (with 60m shoes) Crawler tracks height Arm 2.5 Arm 3.0 Arm m 401m 401m 762m 761m 761m 292m 292m 292m 292m 292m 292m 254m 254m 254m 213m 213m 213m 895 mm 895 mm 895 mm 44m 44m 44m 304m 304m 304m 376m 376m 376m 199m 199m 199m 259m 259m 259m 79m 79m 79m CX130C BLADE Arm 2.5 Arm 3.0 Arm 2.1 A B C D E F G H I J K Overall length (without attachment) Overall length (with attachment) Overall height (with attachment) Cab height Upper structure overall width Swing (rear end) radius Clearance height under upper structure Minimum ground clearance Wheel base (Center to center of wheels) Crawler overall length Track gauge Undercarriage overall width (with 60m shoes) Crawler tracks height 418m 418m 418m 792m 791m 791m 292m 292m 292m 292m 292m 292m 254m 254m 254m 213m 213m 213m 895 mm 895 mm 895 mm 44m 44m 44m 279m 279m 279m 350m 350m 350m 199m 199m 199m 259m 259m 259m 79m 79m 79m 13

14 CX C-SERIES HYDRAULIC EXCAVATORS CX130C Performance data B D 5 E C A CX130C / CX130C BLADE Arm 2.5 Arm 3.0 Arm 2.1 A B C D E Boom length Bucket radius Bucket wrist action Maximum reach at GRP Maximum reach Max. digging depth Max. digging height Max. dumping height 463m 463m 463m 120m 120m 120m m 864m 781m 831m 877m 796m 554m 605m 515m 877m 905m 855m 639m 668m 617m 14 Digging force With 0.5 m 3 bucket (ISO 6015) CX130C / CX130C BLADE Arm 2.5 Arm 3.0 Arm 2.1 Arm digging force - with auto power boost Bucket digging force - with auto power boost 62 kn 56 kn 70 kn 66 kn 60 KN 74 kn 90 kn 90 kn 90 kn 95 kn 95 kn 95 kn

15 Lifting capacity Front REACH At max reach 360 Standard arm. 2.5 arm length, bucket, 600G LC shoes, max reach 8.02 m * 1840 * 1430 * 1430 * 2380 * * 1210 * 2910 * 2910 * 2840 * * 1250 * 1150 * 1150 * 5260 * 5260 * 3960 * * 1150 * 7710 * * * 2480 * 7980 * * * 3700 * 5020 * 5020 * 9250 * * * 5050 * 7810 * 7810 * 8530 * * * * 2710 Short arm. 2.1 arm length, 0.55 m 3 bucket, 600G LC shoes, max reach 7.67 m * 2070 * 1760 * 1760 * 2900 * 2900 * 2270 * * 1460 * 3240 * 3240 * 3020 * * 1370 * 5680 * 5680 * 4250 * * * * * * * * 5460 * 9090 * * * 8160 * 8060 * * * 3550 m Long arm. 3.0 arm length, 0.37 m 3 bucket, 600G LC shoes, max reach 8.48 m * 1370 * 2240 * 2240 * 1200 * 1200 * 2610 * * * 1140 * 3450 * * * * * * * 2600 * 8570 * * * 4560 * 9100 * * * 6670 * 8870 * * * * 7350 * * * Hydraulic capacity 87% 15

16 Lifting capacity Front * Hydraulic capacity 87% REACH At max reach CX130C BLADE UP. Standard arm. 2.5 arm length, bucket, 600G shoes, max reach 8.31 m * 1840 * 1430 * 1430 * 2380 * * 1210 * 2910 * 2910 * 2840 * * 1250 * 1150 * 1150 * 5260 * 5260 * 3960 * * 1150 * 7710 * * 1210 * 2480 * 2480 * 7980 * * * 5020 * * * 7810 * * * * 5890 * 4010 * * 2840 CX130C BLADE DOWN. Standard arm. 2.5 arm length, bucket, 600G shoes, max reach 8.31 m * 1840 * 1430 * 1430 * 2380 * 2380 * 1210 * 1210 * 2910 * 2910 * 2840 * * 1250 * 1150 * 1150 * 5260 * 5260 * 3960* * * * 1150 * 7710 * * * * * 1210 * 2480 * 2480 * 7980 * * * * * 1350 * 5020 * 5020 * 9250 * * * * * 7810 * 8530 * * * * * * * 3010 CX130C BLADE DOWN. Short arm. 2.1 arm length, bucket, 600G LC shoes, max reach 7.96 m * 2070 * 1760 * 1760 * 2900 * 2900 * 2270 * 2270 * 1460 * 1460 * 3240 * 3240 * 3020 * * 1370 * 5680 * 5680 * 4250 * * * * * * * * * * * * * * 5460 * 9090 * * * * * 8160 * 8060 * * * * 5480 * 3810 * 3810 * CX130C BLADE UP. Short arm. 2.1 arm length, bucket, 600G LC shoes, max reach 7.96 m * 2070 * 1760 * 1760 * 2900 * 2900 * 2270 * * 1460 * 3240 * 3240 * * 1370 * 5680 * 5680 * 4250 * * * 1370 * 8030 * * * * * 5460 * * * 8160 * 8060 * * * 5480 * 3810 * 3720 CX130C BLADE DOWN. Long arm. 3.0 arm length, bucket, 600G LC shoes, max reach 8.77 m 1370 * 1370 * 2240 * 2240 * 1200 * 1200 * 2610 * * * 1140 * 3450 * 3450 * 2990 * * * 1150 * 6630 * 6620 * 4700 * * * * * 2600 * 8570 * * * * * * 3700 * 4560 * 4560 * 9100 * * * * * * 5040 * 6670 * 6670 * 8870 * * * * * * 7360 * * * 2380 CX130C BLADE UP. Long arm. 3.0 arm length, bucket, 600G LC shoes, max reach 8.77 m * 1370 * 2240 * 2240 * 1200 * 1200 * 2610 * * 1140 * 3450 * 3450 * * 1150 * 6630 * * * 2600 * * * 3700 * 4560 * 4560 * * * 5040 * 6670 * 6670 * * * * 7360 * m

17 CX C-SERIES HYDRAULIC EXCAVATORS CX160C Specifications Engine Model Tier 4 interim certifi ed ISUZU AM-4JJ1X Type Water-cooled, 4-cycle diesel, 4-cylinder in line, High pressure common rail system (electric control), Turbocharger with air cooled intercooler, DPD system Number of cylinders 4 Bore/Stroke 95.4 x mm Horsepower SAE J1349 NET 92.2 kw at 2.20in -1 Maximum torque SAE J1349 NET 391 Nm at 1.80in -1 Hydraulic system Max oil fl ow 2 x in -1 2 variable displacement axial piston pumps with regulating system Working circuit pressure Boom/Arm/Bucket 34.3 MPa Boom/Arm/Bucket (with auto power up) 36.3 MPa Swing circuit 27.9 MPa Travel 34.3 Mpa Swing Maximum swing speed 1in -1 Travel Travel motor Variable displacement axial piston motor Max travel speed 5.4 km/h (Automatic travel speed shifting) Low travel speed 2.8 km/h Gradeability 70% (35 ) Drawbar pull 161 kn Electrical system Alternator 50 Amp Undercarriage Number of carriers rollers (each side) 2 Number of track rollers (each side) 7 Number of shoes (each side) 44 Type of shoe Triple grouser shoe Capacities Fuel tank 300 l Hydraulic system 165 l Cooling system 16.2 l Weight and ground pressure With 2.6 Arm, 0.62 m 3 bucket, operator, lubricant, coolant, full fuel tank Weight (kg) Ground pressure (MPa) 60m grouser shoe

18 CX C-SERIES HYDRAULIC EXCAVATORS CX160C General dimensions A B C D E F G H I J K Overall length (without attachment) Overall length (with attachment) Overall height (with attachment) Cab height Upper structure overall width Swing (rear end) radius Clearance height under upper structure Minimum ground clearance Wheel base (Center to center of wheels) Crawler overall length Track gauge Undercarriage overall width (with 60m shoes) Crawler tracks height Arm 2.2 Arm 2.6 Arm m 441m 441m 847m 844m 850m 305m 305m 315m 305m 305m 305m 254m 254m 254m 245m 245m 245m 102m 102m 102m 44m 44m 44m 319m 319m 319m 399m 399m 399m 199m 199m 199m 249m 249m 249m 92m 92m 92m Lifting capacity REACH Front 9. At max reach Standard arm. 2.6 arm length, 0.62 m 3 bucket, 600G LC shoes, max reach 9.04 m * 2600 * 1610 * 1610 * 3240 * 3240 * 2020 * 2020 * 1460 * 1460 * 4250 * * * 1420 * 8530 * 8530 * 6170 * * 1450 * 8890 * * * * * 6040 * 9640 * * * 8590 * * * * * * * 2950 m

19 Performance data A B C D E Boom length Bucket radius Bucket wrist action Maximum reach at GRP Maximum reach Max. digging depth Max. digging height Max. dumping height Arm 2.2 Arm 2.6 Arm m 515m 515m 135m 135m 135m m 887m 922m 867m 904m 938m 566m 606m 649m 901m 924m 929m 638m 661m 669m Digging force With 0.62 m 3 bucket (ISO 6015) Arm 2.2 Arm 2.6 Arm 3.0 Arm digging force - with auto power boost Bucket digging force - with auto power boost 90 kn 79 kn 72 kn 95 kn 84 kn 77 kn 112 kn 112 kn 112 kn 118 kn 118 kn 118 kn Lifting capacity Front 360 REACH Short arm. 2.2 arm length, 0.62 m 3 bucket, 600G LC shoes, max reach 8.67 m At max reach 2130 * 2130 * 3780 * * 1940 * 5000 * * * * * * * 6440 * * * 7150 * * * 6750 * * * * 9500 * * * * * * * 3560 Long arm. 3.0 arm length, 0.51 m 3 bucket, 600G LC shoes, max reach 9.38 m * Hydraulic capacity 87% * 2210 * 1500 * 1500 * 3030 * 3030 * 2360 * * 1380 * 3870 * * * 1360 * 7520 * 7520 * 5620 * 4780 * 4630 * * * * * * * 3220 * 8430 * * * 5690 * 9660 * * * 7920 * * * * * * * 2520 m

20 CX C-SERIES HYDRAULIC EXCAVATORS CX180C Specifications Engine Model Tier 4 interim certifi ed ISUZU AM-4JJ1X Type Water-cooled, 4-cycle diesel, 4-cylinder in line, High pressure common rail system (electric control), Turbocharger with air cooled intercooler, DPD system Number of cylinders 4 Bore/Stroke 95.4 x mm Horsepower SAE J1349 NET 92.2 kw at 2.20in -1 Maximum torque SAE J1349 NET 391 Nm at 1.80in -1 Hydraulic system Max oil fl ow 2 x in -1 2 variable displacement axial piston pumps with regulating system Working circuit pressure Boom/Arm/Bucket 34.3 MPa Boom/Arm/Bucket (with auto power up) 36.3 MPa Swing circuit 27.9 MPa Travel 34.3 Mpa Swing Maximum swing speed 1in -1 Travel Travel motor Fixed displacement axial piston motor Max travel speed 4.0 km/h (Automatic travel speed shifting) Low travel speed 2.3 km/h Gradeability 70% (35 ) Drawbar pull 190 kn Electrical system Alternator 50 Amp Undercarriage Number of carriers rollers (each side) 2 Number of track rollers (each side) 7 Number of shoes (each side) 46 Type of shoe Triple grouser shoe Capacities Fuel tank 300 l Hydraulic system 165 l Cooling system 16.2 l Weight and ground pressure With 2.6 Arm, 0.68 m 3 bucket, operator, lubricant, coolant, full fuel tank Weight (kg) Ground pressure (MPa) 60m grouser shoe

21 General dimensions A B C D E F G H I J K Overall length (without attachment) Overall length (with attachment) Overall height (with attachment) Cab height Upper structure overall width Swing (rear end) radius Clearance height under upper structure Minimum ground clearance Wheel base (Center to center of wheels) Crawler overall length Track gauge Undercarriage overall width (with 60m shoes) Crawler tracks height Arm 2.2 Arm 2.6 Arm m 450m 450m 847m 844m 850m 309m 309m 313m 309m 309m 309m 254m 254m 254m 245m 245m 245m 104m 104m 104m 44m 44m 44m 337m 337m 337m 418m 418m 418m 220m 220m 220m 280m 280m 280m 92m 92m 92m 21

22 CX C-SERIES HYDRAULIC EXCAVATORS CX180C Performance data Arm 2.2 Arm 2.6 Arm 3.0 A B C D E Boom length Bucket radius Bucket wrist action Maximum reach at GRP Maximum reach Max. digging depth Max. digging height Max. dumping height 515m 515m 515m 135m 135m 135m m 887m 922m 867m 904m 938m 564m 604m 647m 903m 926m 931m 640m 663m 671m Digging force With 0.62 m 3 bucket (ISO 6015) Arm digging force - with auto power boost Bucket digging force - with auto power boost Arm 2.2 Arm 2.6 Arm kn 79 kn 72 kn 95 kn 84 kn 77 kn 112 kn 112 kn 112 kn 118 kn 118 kn 118 kn 22

23 Lifting capacity Front REACH 9. At max reach 360 m Short arm. 2.2 arm length, 0.68 m 3 bucket, 600G LC shoes, max reach 8.67 m * 2100 * 2100 * 2100 * 3750 * 3750 * 1910 * 1910 * 4980 * 4980 * 4580 * * * 1860 * 9460 * 9460 * 6660 * * * 1900 * 6380 * 6380 * 8200 * * * 7140 * * * 6750 * * * * 9510 * * * * 9440 * 6230 * * 4380 Standard arm. 2.6 arm length, 0.68 m 3 bucket, 600G LC shoes, max reach 9.04 m * 2590 * 1570 * 1570 * 3210 * 3210 * 2020 * 2020 * 1430 * 1430 * 4220 * * * 1390 * 8540 * 8540 * 6160 * * * 1420 * 8790 * 8790 * 7800 * * 1520 * 7490 * 7490 * * 1690 * 6030 * 6030 * 9640 * * 2010 * 8600 * 8600 * * * * * * * * 3630 Long arm. 3.0 arm length, 0.62 m 3 bucket, 600G LC shoes, max reach 9.38 m 2180 * 2180 * 1460 * 1460 * 3010 * 3010 * 2340 * 2340 * 1350 * 1350 * 3840 * * * 1330 * 7520 * 7520 * 5610 * * * * 1440 * 1370 * 1370 * * * * 1630 * 1470 * 1470 * 3210 * 3210 * 8390 * 8390 * * 1640 * 4600 * 4600 * 5680 * 5680 * 9640 * * * 6190 * 7910 * 7910 * * * * * * * * * * Hydraulic capacity 87% 23

24 Standard Equipment ENGINE Isuzu 4-cylinder turbodiesel in line Certifi ed Tier 4 interim / EU stage 3b Electronic fuel injection High pressure common rail system Variable geometry turbo charger Exhaust gas recirculation Diesel Particulate Diffuser (DPD) Neutral safety start Auto-engine warm up, emergency stop Glow-plug pre-heat Idle System: Auto-idle One-touch idle Idle shut-down EPF (Engine Protection Feature) Dual-stage fuel fi ltration Dual element airfi lter Remote oil fi lter Green plug oil drain 500-hour engine oil change interval Refuelling Pump HYDRAULICS Auto power boost Auto swing priority Auto travel speed change Selectable work modes Options HYDRAULICS Auxiliary hydraulics Single acting pedal activated breaker circuit Multifunction circuit with proportional control Low fl ow circuit with proportional control ATTACHMENT Hydr. or mech quickcoupler Buckets: Extreme / Heavy duty / GP / ditching Overload warning device SWC - SWING RELIEF CONTROL SSC - SPOOL STROKE CONTROL BEC - BOOM ECONOMY CONTROL AEC - AUTO ECONOMY CONTROL SEC - SWING ECONOMY CONTROL ISO pattern controls Pre-set auxiliary pump settings Switch controlled auxiliary selection Auxiliary valve Auxiliary pipe brackets 5,000 hour hydraulic oil change interval 1,000 hour hydraulic fi lter change interval Hydraulic track adjustment SAHR brake UPPERSTRUCTURE Isolation mounted cab (fl uid and spring) Common key vandal locks Swivel guard belly pan Rear view safety camera ATTACHMENT Bucket linkage with hook Boom mounted work light (70 watt) Auxiliary pipe brackets Centralized lube bank Hammers, shears, grapples ONLY FOR CX130C Arm 2.1 / 3 m ONLY FOR CX160C - CX180C Arm 2.2 / 3 m OPERATOR STATION Front cab guard - vertical bars (OPG level 2) Front cab guard - vertical bars (OPG level 1) Front mesh screen AM/FM radio w/ antenna and Attachment cushion valve Arm and boom regeneration Arm and boom hose burst check valves ONLY FOR CX130C Standard monoboom 4.63 m Arm 2.5 ONLY FOR CX160C - CX180C Standard monoboom 5.15m Arm 2.60m OPERATOR STATION ROPS/FOPS level 1 cab FOPS guard OPG level II on cab roof Pressurized cab Tempered safety glass One-touch lock front window Sun visor & rain defl ector AC/heat/defrost w/ auto climate control Hot & coolbox, cup holder & ashtray Interior dome light Cloth covered air-suspension seat Seat-belt Adjustable armrests Tilting consoles - 4-position Low-effort controls (short) Sliding cockpit (18m) 2-speakers Side-view camera UPPERSTRUCTURE Auto centralized greasing system Rubber bumper guard (order through Service Parts) UNDERCARRIAGE Steel shoes, triple semi-grouser ONLY FOR CX130C 500mm, 60m, 700mm Rubber link chain 500mm Double track guide Controls pre-wired for auxiliary Auxiliary select system Straight travel Aux-in port for personal electronics Multifunction color monitor Rear-view camera Anti-theft system (start code system) Rubber fl oormat 12-volt electric socket 24-volt cigarette lighter One-piece right hand window 2 internal & 3 external view mirrors 2 working lights (boom & upperstructure) 2 cab top working lights Windshield wiper / washer Clear (Lexan) roof window w/ sunshade Storage compartments On-board diagnostic system Travel alarm with cancel switch UNDERCARRIAGE 60m steel shoes, triple semigrouser Full overlap turntable bearing tub ONLY FOR CX160C - CX180C Single track guide ONLY FOR CX160C 500mm, 700mm Rubber link chain 500mm Triple track guide ONLY FOR CX180C 700mm, 800mm Triple track guide Form No GB - Printed in Italy - MediaCross Firenze - 03/14 Standard and optional equipment shown can vary by country. Hanlon Case Highlands Campton Bedford SG17 5NZ info@hanlon-case.co.uk Customer Assistance The call is free from a land line. Check in advance with your Mobile Operator if you will be charged. NOTE: Standard and optional fi ttings can vary according to the demands and specifi c regulations of each country. The illustrations may include optional rather than standard fi ttings - consult your Case dealer. Furthermore, CNH Industrial reserves the right to modify machine specifi cations without incurring any obligation relating to such changes. Conforms to directive 98/37/CE