HIGH VISCOSITY LIQUID PUMPS

Transcription

1 HIGH VISCOSITY LIQUID PUMPS

2 FLUX-HIGH VISCOSITY LIQUID PUMPS HIGHLY ACCLAIMED... FLUX high viscosity liquid pumps have been tried and tested in numerous industrial sectors around the world. FLUX pumps are available in a variety of types and models designed to meet every requirement for transferring thin to high viscosity media. All models are easy to operate and maintain. Naturally, they all carry the advanced design and safety features that users expect from FLUX. For the last 0 years, we have manufactured innovative, high-quality products. Operators readily acknowledge the performance of our powerful and extremely reliable pumps. IN THIS BROCHURE: FLUX eccentric worm-drive pumps are designed for a wide range of applications and are available in two versions:. The robust bearing flange version is suited to continuous operation and is available with a three-phase electric motor or a compressed air motor.. A lightweight, easy-to-handle version for quick-change applications is equipped with a planetary gear. GS pump models are used with a FLUX commutator motor or compressed air motor, and are ideal for conveying substances with up to mpas (^=cp) viscosity. The GS model is suitable for lower capacities, covering the viscosity range up to mpas (^=cp) and available with a variety of motors. FLUX screw pumps are ideal for quickly and safely transferring thin to medium viscosity liquids with viscosities up to mpas (^=cp). In contrast to the eccentric wormdrive pumps they can be used against a closed discharge side. FLUX screw pumps are available with either a threephase electric motor or a compressed air motor in a variety of power ratings. NOTE Eccentric worm-drive pumps approved for use in hazardous areas Zone 0, for transferring high flammability fluids class IIA and IIB, see page.

3 FLUX Introduction Table of contents Eccentric worm-drive pump Type F 0 S version with bearing flange Eccentric worm-drive pump Type F 0 GS version with planetary gear TABLE OF CONTENTS 9 Eccentric worm-drive pump Type F 0 GS version with planetary gear; By-pass valve 0 Sanitary pump Type F 0 S version with bearing flange Sanitary pump Type F 0 GS version with planetary gear Eccentric worm-drive pumps horizontal version Screw pump Type F 0 S barrel pump version and version with bearing flange 9 Eccentric worm-drive pumps approved for use in Zone 0; Viscosity Chart INNOVATORS IN FLOW TECHNOLOGY

4 FLUX ECCENTRIC WORM-DRIVE PUMPS TYPE F 0 S AND F 0 SB VERSION WITH BEARING FLANGE Recommended for transferring: Thin to high viscosity, even pasty, yet still flowing substances. Three-phase motor Typical applications: Transferring viscous substances from barrels and/or containers. Feeding filling machines. Compressed air motor Available drive motors: Three-phase electric or compressed air motors. Three-phase motors of 0, or, kw, with a speed of 90 or 00 rpm. For high viscosity, pasty substances a motor of, kw is required with a recommended speed of 00 rpm for viscosities exceeding mpas (^=cp), because of the low velocity of such products. A speed of 90 rpm may be used if a follow-on plate would support the continuous flow of the product to the pump inlet. For viscosities up to.000 mpas (^=cp) a motor of 0, kw and 90 rpm will be sufficient. On compressed air motors of 0, to,0 kw, the speed may be controlled by a valve in the air supply line. ECCENTRIC WORM F 0 S-/ Seal types: F 0 S with mechanical seal or F 0 SB with stuffing box. Scope of supply: A complete eccentric worm-drive pump consists of: drive motor, pump, stator and hose connection. Pump Viscosity Curve Type mpas (^=cp) No. F 0 S-0/ F 0 SB-0/ F 0 S-/ F 0 SB-/ Values ± 0% obtained with a speed of 90 rpm H [bar] F 0 S-0/ AND F 0 SB-0/ F 0 S-/ AND F 0 SB-/ Q [l/min] Delivery data for other viscosities on request.

5 ECCENTRIC WORM-DRIVE PUMPS VERSION WITH BEARING FLANGE, WITHOUT STATOR STATORS FOR ECCENTRIC WORM-DRIVE PUMPS TYPE F 0 S AND F 0 SB Material Temperature Remarks Weight Outer-Ø FLUX Type F 0 S-0/ F 0 SB-0/ F 0 S-/ F 0 SB-/ Delivery rate max. 0 l/min max. 0 l/min max. 0 l/min max. 0 l/min Delivery head max. bars max. bars max. bars max. bars Seal type Mechanical seal in Stuffing box in PTFE, Mechanical seal in Stuffing box in PTFE, ceramic oxide, re-adjustable ceramic oxide, re-adjustable o-rings in FPM o-rings in FPM Material Bearing flange in aluminium*; outer tube, shaft, eccentric worm in stainless steel. ( Ti) Outer-Ø 0 mm 0 mm mm mm /Weight Immersion length 00 mm 0 0/,9 kg 0 0/,9 kg 0 9/, kg 0 9/, kg Immersion length 000 mm 0 0/, kg 0 /, kg 0 /, kg 0 9/, kg Immersion length 00 mm 0 /, kg 0 /, kg 0 /, kg 0 9/, kg *Type F 0 SF with bearing flange in stainless steel on request. NBR white max. 90 C particularly suitable for oils and greases, 0, kg 0 mm 0 (Perbunan) also for food products 0, kg mm 0 NBR black max. 90 C particularly suitable for oils and greases, 0, kg 0 mm 0 (Perbunan) not suitable for food products 0, kg mm 0 0 CSM max. 90 C paricularly suitable for corrosive products 0, kg 0 mm 0 (Hypalon) not suitable for oils, greases nor food products 0, kg mm 0 FPM max. 0 C excellent chemical resistance to all different 0, kg 0 mm 0 (Viton) kind of products, not suitable for food products 0, kg mm 0 PTFE max. 0 C excellent chemical resistance, 0, kg 0 mm 0 (Teflon) particularly suitable for food products, 0, kg mm 0 pharmaceuticals and cosmetics Hose connection complete with union G / (BSP / female) for pumps Type F 0 S and F 0 SB DN DN DN DRIVE MOTORS FOR ECCENTRIC WORM-DRIVE PUMPS TYPE F 0 S AND F 0 SB Three-phase motors 0/00 Volt, 0 Hz, jet-proof to IP Capacity Speed Weight Motor with Motor with cable terminal box motor protection switch 0, kw 90 rpm, kg , kw 00 rpm,0 kg , kw 90 rpm,0 kg , kw 00 rpm,0 kg Three-phase motors 0/00 Volt, 0 Hz, explosion-proof to EEx e II T Capacity Speed Weight Motor Motor prot. switch Weight Range of setting 0, kw 90 rpm,0 kg ,, A, kg 9 0 0, kw 00 rpm,0 kg 00 0,, A, kg 9 0 0,9 kw 00 rpm,0 kg 00 0,,0 A, kg 9 0 9, kw 90 rpm,0 kg ,,0 A, kg Compressed air motors, max. operating pressure bars Carrying handle Weight,0 kg Carrying handle for explosionproof motors, with support for motor protection switch Weight, kg 00 0 ECCENTRIC WORM-DRIVE PUMPS TYPE F 0 S AND F 0 SB Type Capacity Speed at bars Thread on air inlet Weight FPM Ex 0, kw 000 rpm G / (BSP / female),0 kg FPM Ex, kw 000 rpm G / (BSP / female),0 kg FPM Ex,0 kw 000 rpm G / (BSP / female) 0,0 kg Carrying handle Weight,0 kg ! Eccentric worm-drive pumps approved for use in hazardous area Zone 0, see page.

6 FLUX ECCENTRIC WORM-DRIVE PUMPS TYPE F 0 GS AND F 0 GSB VERSION WITH PLANETARY GEAR F Ex Recommended for transferring: Thin to medium viscosity liquids up to a maximum viscosity of mpas (^=cp). F - Ex Typical applications: Liquid transfer from barrels and/or containers. The pumps type F 0 GS and F 0 GSB are particularly lightweight and easy-to-handle making them extremely versatile pumps. The lightest model has a weight of, kg only. The weight of the complete pump depends on the immersion length and motor assembly. F F EL Available drive motors: Commutator motors or compressed air motors. F An infinitely variable speed variator also available on explosion-proof models allows the operator to set pump capacity to specific delivery requirements. F 0 Ex Seal types: F 0 GS with mechanical seal or F 0 GSB with stuffing box. F 0 GS-0/ Scope of supply: A complete eccentric worm-drive pump consists of: drive motor, pump, stator and hose connection. Pump Viscosity Curve Type mpas (^=cp) No. F /F EL F /F EL F 0 Ex F 0 Ex EL F - F 0- Ex FEx/F-Ex F- Ex F F EL Values ± 0% H [bar] 0 F 0 GS-0/ AND F 0 GSB-0/ Q [l/min] H [bar] 0 F 0 GS-/ AND F 0 GSB-/ Q [l/min] Delivery data for other viscosities on request.

7 ECCENTRIC WORM-DRIVE PUMPS VERSION WITH PLANETARY GEAR, WITHOUT STATOR FLUX Type F 0 GS-0/ F 0 GSB-0/ F 0 GS-/ F 0 GSB-/ Delivery rate max.0 l/min max. 0 l/min max. 0 l/min max. 0 l/min Delivery head max. bars max. bars max. bars max. bars Seal type Mechanical seal in Stuffing box in PTFE, Mechanical seal in Stuffing box in PTFE, ceramic oxide, re-adjustable ceramic oxide, re-adjustable o-rings in FPM o-rings in FPM Material Outer tube, shaft, eccentric worm in stainless steel. ( Ti) Outer-Ø 0 mm 0 mm mm mm /Weight Immersion length 00 mm 0 0/, kg 0 /, kg 0 /, kg 0 9/, kg Immersion length 000 mm 0 0/,0 kg 0 9/,0 kg 0 /, kg 0 9/, kg Immersion length 00 mm 0 /, kg 0 0/, kg 0 /,0 kg 0 99/,0 kg STATORS FOR ECCENTRIC WORM-DRIVE PUMPS TYPE F 0 GS AND F 0 GSB Material Temperature Remarks Weight Outer-Ø NBR white max. 90 C particularly suitable for oils and greases, 0, kg 0 mm 0 (Perbunan) also for food products 0, kg mm 0 NBR black max. 90 C particularly suitable for oils and greases, 0, kg 0 mm 0 (Perbunan) not suitable for food products 0, kg mm 0 0 CSM max. 90 C particularly suitable for corrosive products, 0, kg 0 mm 0 (Hypalon) not suitable for oils, greases nor food products 0, kg mm 0 FPM max. 0 C excellent chemical resistance to all different 0, kg 0 mm 0 (Viton) kind of products, not suitable for food products 0, kg mm 0 PTFE max. 0 C excellent chemical resistance, 0, kg 0 mm 0 (Teflon) particularly suitable for food products, 0, kg mm 0 pharmaceuticals and cosmetics Hose connection complete with union G / (BSP / female) for pumps Type F 0 GS and F 0 GSB DN DN DN COMMUTATOR AND COMPRESSED AIR MOTORS FOR PUMPS TYPE F 0 GS AND F 0 GSB Commutator motors 0 Volt, 0 Hz (other voltages and/or frequencies on request) Type Capacity protected to max. viscosity Weight with NVR* without NVR* F 0 Watt IP mpas (^=cp), kg 0 00 F EL 0 Watt IP mpas (^=cp), kg 0 0 F 00 Watt IP mpas (^=cp),0 kg F EL 00 Watt IP mpas (^=cp),0 kg F 0 Watt IP.000 mpas (^=cp), kg F EL 0 Watt IP.000 mpas (^=cp), kg 00 0 F - 00 Watt IP.000 mpas (^=cp), kg F 0 Ex 0 Watt II G EEx de IIC T.000 mpas (^=cp), kg F 0 Ex EL 0 Watt II G EEx de IIC T.000 mpas (^=cp), kg F 0- Ex 00 Watt II G EEx de IIC T.000 mpas (^=cp), kg *NVR = no-volt release Compressed air motors, explosion-proof, operating pressure max. bar, thread on air inlet G / (BSP / female) Type Capacity Valve type max. viscosity Weight F Ex 0 Watt trigger operated valve mpas (^=cp), kg F - Ex 0 Watt without valve mpas (^=cp) 0,9 kg F - Ex 0 Watt ball valve mpas (^=cp),0 kg ECCENTRIC WORM-DRIVE PUMPS TYPE F 0 GS AND F 0 GSB! Eccentric worm-drive pumps approved for use in Zone 0, see page.

8 FLUX ECCENTRIC WORM-DRIVE PUMP TYPE F 0 GS VERSION WITH PLANETARY GEAR Recommended for transferring: Thin to high viscosity media up to a maximum viscosity of mpas (^=cp). F 0 Typical applications: Very lightweight and easy-to-handle pump designed for lower capacities. Extremely smooth transfer operations with a speed of 0 or 0 rpm only. Available drive motors: Single-phase AC motors with capacitor or three-phase motors. Seal types: With mechanical seal or, on request, with stuffing box. Scope of supply: A complete eccentric worm-drive pump consists of: drive motor, pump, stator and hose connection. F 0 GS-0/ Pump Speed Curve Type No. F 0 GS-0/ F 0 GS-/ Motor 0 rpm Pump 0 rpm Motor 0 rpm Pump 0 rpm Motor 0 rpm Pump 0 rpm Motor 0 rpm Pump 0 rpm Viscosity:.000 mpas (^=cp) Values ± 0% H [bar] F 0 GS-0/ AND F 0 GS-/ Q [l/min] Delivery data for other viscosities on request.

9 FLUX ECCENTRIC WORM-DRIVE PUMP VERSION WITH PLANETARY GEAR, WITHOUT STATOR Type F 0 GS-0/ F 0 GS-/ Delivery rate max. l/min max. 0 l/min Delivery head max. bars max. bar Seal type Material Mechanical Seal* in ceramic oxide, o-rings in FPM Outer tube, shaft, eccentric worm in stainless steel. ( Ti) Outer-Ø 0 mm mm /Weight Immersion length 00 mm 0 00/, kg 0 00/, kg Immersion length 000 mm 0 0/,0 kg 0 0/, kg Immersion length 00 mm 0 0/, kg 0 0/,0 kg STATORS FOR ECCENTRIC WORM-DDRIVE PUMPS TYPE F 0 GS *version with stuffing box on request. Material Temperature Remarks Weight Outer-Ø NBR white max. 90 C particularly suitable for oils and greases, 0, kg 0 mm 0 (Perbunan) also for food products 0, kg mm 0 NBR black max. 90 C particularly suitable for oils and greases, 0, kg 0 mm 0 (Perbunan) not suitable for food products 0, kg mm 0 0 CSM max. 90 C particularly suitable for corrosive products, 0, kg 0 mm 0 (Hypalon) not suitable for oils, greases nor food products 0, kg mm 0 FPM max. 0 C excellent chemical resistance to all different 0, kg 0 mm 0 (Viton) kind of products, not suitable for food products 0, kg mm 0 PTFE max. 0 C excellent chemical resistance, 0, kg 0 mm 0 (Teflon) particularly suitable for food products, 0, kg mm 0 pharmaceuticals and cosmetics Hose connection complete with union G / (BSP / female) for pumps Type F 0 GS DN DN DN DRIVE MOTORS FOR ECCENTRIC WORM-DRIVE PUMPS TYPE F 0 GS Single-phase AC motors with capacitor, 0 Volt, 0 Hz, jet-proof to IP, with motor protection switch, m cable and plug Type Capacity Speed max. viscosity Weight F 0/ 0,0 kw 0 rpm mpas (^=cp),0 kg F 0/ 0,0 kw 0 rpm mpas (^=cp),0 kg F 0/ 0, kw 0 rpm mpas (^=cp),0 kg Three-phase motors 0/00 Volt, 0 Hz, jet-proof to IP, with motor protection switch, without cable Type Capacity Speed max. viscosity Weight F 0/ 0, kw 0 rpm mpas (^=cp),0 kg F 0/ 0, kw 0 rpm mpas (^=cp),0 kg By-pass valve BY-PASS VALVE, THREAD ON INLET G / (BSP / FEMALE) THREAD ON OUTLET G / A (BSP / MALE) Carrying handle Weight,0 kg 00 0 Carrying handle Weight,0 kg 00 0 Material Pressure Discharge Connection Weight Stainless steel. ( Ti) bars Flow back tube, kg 00 0 Stainless steel. ( Ti) bars Hose connector DN, kg Brass bars Flow back tube, kg 00 0 Brass bars Hose connector DN,9 kg 00 0 ECCENTRIC WORM-DRIVE PUMP TYPE F 0 GS/ BY-PASS VALVE 9

10 FLUX SANITARY PUMP F 0 S VERSION WITH BEARING FLANGE Recommended for transferring: Thin to high viscosity, even pasty, yet still flowing substances. Three-phase motor Typical applications: A pump designed to meet the specific requirements of the food, cosmetics and pharmaceutical industries. Compressed air motor The F 0 S can be stripped down in no time for cleaning and/or sterilisation. Different seal types are available and easily exchangeable. The stator housing comprises a safety bar to protect containers and to allow transfer operations from plastic inliners. The F 0 S pump is available in special version with A approval: ground and polished, equipped with a closed mecanical seal in stainless steel and sliding faces in silicium carbide (SiC). Available drive motors: Three-phase electric motors or compressed air motors. Seal type: Mechanical seal ECCENTRIC WORM F 0 SA-0/ Scope of supply: A complete sanitary pump consists of: drive motor, pump, stator and hose connection. Pump Viscosity Curve Type mpas (^=cp) No. F 0 S, S, SA-0/ AND F 0 S, S, SA-/ F 0 S-0/ F 0 S-0/ F 0 SA-0/ F 0 S-/ F 0 S-/ F 0 SA-/ Values ± 0% obtained with a speed of 90 rpm H [bar]! Eccentric worm-drive pumps approved for use in Zone 0, see page Q [l/min] Delivery data for other viscosities on request. 0

11 SANITARY PUMPS Eccentric worm-drive pump, version with bearing flange in stainless steel, without stator Thread on outlet Rd x / G / A Rd x / G / A FLUX Type F 0 S-0/ F 0 S-0/ F 0 S-/ F 0 S-/ Delivery rate max. 0 l/min max. 0 l/min max. 0 l/min max. 0 l/min Delivery head max. bars max. bars max. bars max. bars Seal type Material Mechanical seal in SiC, o-rings in FPM (food-grade) Bearing flange, outer tube, shaft, eccentric worm in stainless steel. ( Ti) Outer-Ø 0 mm 0 mm mm mm /Weight Immersion length 00 mm /, kg 0 0 0/, kg 0 00/, kg 0 0/, kg Immersion length 000 mm /, kg 0 0 0/, kg 0 00/,0 kg 0 0/,0 kg Immersion length 00 mm 0 0 0/,0 kg 0 0 /,0 kg 0 0/, kg 0 /, kg Eccentric worm-drive pump in A-version, with bearing flange in stainless steel, outlet Clamp without stator Type F 0 SA-0/ F 0 SA-/ Delivery rate max. 0 l/min max. 0 l/min Delivery head max. bars max bars Seal type Closed mechanical seal in stainless steel, sealing faces SiC, o-rings in FPM (food-grade) Material Bearing flange, outer tube, shaft, eccentric worm in stainless steel. ( Ti), ground and polished according to A standards Outer-Ø 0 mm mm /Weight Immersion length 00 mm 0 0 0/, kg 0 0/, kg Immersion length 000 mm 0 0 0/, kg 0 0/,0 kg Immersion length 00 mm 0 0 /,0 kg 0 /, kg STATOR IN PTFE, STATOR HOUSING IN STAINLESS STEEL WITH SAFTY BAR Type F 0 S and F 0 S outer-ø 0 mm Weight 0, kg outer-ø mm Weight 0, kg Type F 0 SA outer-ø 0 mm 0 90 Weight 0, kg outer-ø mm 0 90 Weight 0, kg Hose connection complete with union nut or Clamp for Pumps Type F 0 S, F 0 S and F 0 SA Union nut Rd x / DN 99 0 DN 99 0 DN Union nut G / DN DN DN Clamp DN DRIVE MOTORS FOR PUMPS TYPE F 0 S, F 0 S AND F 0 SA Three-phase motors 0/00 Volt, 0 Hz, jet-proof to IP, painting red/black* Capacity Speed Weight Motor with Motor with cable terminal box motor protection switch 0, kw 90 rpm, kg , kw 00 rpm,0 kg , kw 90 rpm,0 kg , kw 00 rpm,0 kg Carrying handle Weight,0 kg SANITARY PUMPS TYPE F 0 S Three-phase motors 0/00 Volt, 0 Hz, explosion-proof to EEx e II T, painting red/black* Capacity Speed Weight Motor Motor protection switch Range of setting Weight 0, kw 90 rpm,0 kg ,, A, kg 9 0 0, kw 00 rpm,0 kg 00 0,, A, kg 9 0 0,9 kw 00 rpm,0 kg 00 0,,0 A, kg 9 0 9, kw 90 rpm,0 kg ,,0 A, kg Carrying handle for explosion-proof motors with support for motor protection switch Weight, kg 00 0 Compressed air motors, max. operating pressure bars, painting red/black* Type Capacity Speed at bars Thread on air inlet Weight FPM Ex 0, kw 000 rpm G / (BSP / female),0 kg FPM Ex, kw 000 rpm G / (BSP / female),0 kg Carrying handle Weight,0 kg FPM Ex,0 kw 000 rpm G / (BSP / female) 0,0 kg *special painting white on request.

12 FLUX SANITARY PUMP TYPE F 0 GS VERSION WITH PLANETARY GEAR F Ex Recommended for transferring: Thin to medium viscosity liquids up to a maximum viscosity of mpas (^=cp). F - Ex Typical applications: Very lightweight and easy-to-handle pump for use in the food, cosmetics and pharmaceutical industries. The F 0 GS can be stripped down in no time for cleaning and/or sterilisation. Different seal types are available and easily exchangeable. The stator housing comprises a safety bar to protect containers and to allow transfer out of plastic inliners. The F 0 GS is available in special version with A approval: ground, polished, with a closed mechanical seal in stainless steel and sliding faces in silicium carbide (SiC). F F F EL Available drive motors: Electric commutator motors or compressed air motors. An infinite variable speed variator allows the operator to set pump capacity to specific delivery requirements. Seal type: Mechanical seal F 0 Ex F 0 GS-0/ Scope of supply: A complete sanitary pump consists of: drive motor, pump, stator and hose connection. Motor Viscosity Curve Type mpas (^=cp) No. F /F EL F /F EL F 0 Ex F 0 Ex EL F - F 0- Ex FEx/F-Ex F- Ex F F EL Values ± 0% 9 H [bar] 0 F 0 GS, GS, GSA-0/ Q [l/min] H [bar] 0 F 0 GS, GS, GSA-/ Q [l/min]! Eccentric worm-drive pumps approved for use in Zone 0 see page. Delivery data for other viscosities on request.

13 FLUX SANITARY PUMPS TYPE F 0 GS Eccentric worm-drive pump with planetary gear, suitable up to mpa (^=cp), without stator Type F 0 GS-0/ F 0 GS-0/ F 0 GS-/ F 0 GS-/ Outlet Rd x / G / A Rd x / G / A Delivery rate max. 0 l/min max. 0 l/min max. 0 l/min max. 0 l/min Delivery head max. bars max. bars max. bars max. bars Seal type Material Mechanical seal in SiC, o-rings in FPM (food-grade) Bearing flange, outer tube, shaft eccentric worm in stainless steel. ( Ti) Outer-Ø 0 mm 0 mm mm mm /Weight Immersion length 00 mm 0 0 0/, kg 0 0 0/, kg 0 0/, kg 0 0/, kg Immersion length 000 mm 0 0 0/, kg 0 0 0/, kg 0 0/, kg 0 0/, kg Immersion length 00 mm 0 0 /, kg 0 0 /, kg 0 /, kg 0 /, kg Eccentric worm-drive pump, A-version, with bearing flange in stainless steel, outlet Clamp, without stator Type F 0 GSA-0/ F 0 GSA-/ Delivery rate max. 0 l/min max. 0 l/min Delivery head max. bar max bar Seal type Closed mechanical seal in stainless steel, sliding faces SiC, o-rings in FPM (food-grade) Material Bearing flange, outer tube, shaft, eccentric worm in stainless steel. ( Ti), ground and polished according to A standards Outer-Ø 0 mm mm /Weight Immersion length 00 mm 0 0 0/, kg 0 0/, kg Immersion length 000 mm 0 0 0/, kg 0 0/,0 kg Immersion length 00 mm 0 0 /,0 kg 0 /, kg SANITARY PUMPS TYPE F 0 GS STATOR IN PTFE, STATOR HOUSING IN STAINLESS STEEL WITH SAFETY BAR Type F 0 GS and F 0 GS Outer-Ø 0 mm Weight 0, kg Outer-Ø mm Weightt 0, kg Type F 0 GSA Outer-Ø 0 mm 0 90 Weight 0, kg Outer-Ø mm 0 90 Weight 0, kg Hose connection complete with union nut or Clamp for pumps Type F 0 GS, F 0 GS and F 0 GSA Union nut Rd x / DN 99 0 DN 99 0 DN Union nut G / DN DN DN Clamp DN COMMUTATOR MOTORS AND COMPRESSED AIR MOTORS FOR PUMPS F 0 GS, F 0 GS, F 0 GSA Commutator motors 0 Volt, 0 Hz (other voltages and/or frequencies on request) Type Capacity protected to max. viscosity Weight With NRV* without NRV* F 0 Watt IP mpas (^=cp), kg 0 00 F EL 0 Watt IP mpas (^=cp), kg 0 0 F 00 Watt IP mpas (^=cp),0 kg F EL 00 Watt IP mpas (^=cp),0 kg F 0 Watt IP.000 mpas (^=cp), kg F EL 0 Watt IP.000 mpas (^=cp), kg 00 0 F - 00 Watt IP.000 mpas (^=cp), kg F 0 Ex 0 Watt II G EEx de IIC T.000 mpas (^=cp), kg F 0 Ex EL 0 Watt II G EEx de IIC T.000 mpas (^=cp), kg F 0- Ex 00 Watt II G EEx de IIC T.000 mpas (^=cp), kg *NRV = no-volt release Compressed air motors, explosion-proof, max. operating pressure bars, female thread G / for compressed air Type Capacity Valve type max. viscosity Weight F Ex 0 Watt trigger operated valve mpas (^=cp), kg F - Ex 0 Watt without valve mpas (^=cp) 0,9 kg F - Ex 0 Watt ball valve mpas (^=cp),0 kg 00 00

14 FLUX ECCENTRIC WORM-DRIVE PUMPS F 0 S TR HORIZONTAL INSTALLATION ON A BASE PLATE, VERSION WITH BEARING FLANGE Recommended for transferring: Thin to high viscosity, even pasty, yet still flowing substances. F 0 S-/ TR Typical applications: The F 0 S TR is designed for horizontal use. A base plate facilitates the installation with a three-phase electric motor. The pump is available in two versions: F 0 S TR with bearing flange in aluminium and flange connection between outer tube and stator housing. F 0 SF TR with bearing flange in stainless steel and clamp connection between outer tube and stator housing as well as on pump inlet and outlet. F 0 SF-/ TR Both versions comprise a stator in PTFE. Available drive motors: Three-phase electric motors. Seal type: Mechanical seal Scope of supply: A complete horizontal pump consists of: drive motor, pump and stator, hose connection on inlet and outlet, base plate. Pumps Viscosity Curve Type mpas (^=cp) Nr. F 0 S-/ TR F 0 SF-/ TR Values ± 0% obtained with a speed of 90 rpm H [bar] F 0 S-/ TR AND F 0 SF-/ TR Q [l/min] Delivery data for other viscosities on request.

15 FLUX ECCENTRIC WORM-DRIVE PUMPS IN HORIZONTAL VERSION Eccentric worm-drive pump type F0 S TR with bearing flange in aluminium, flange connection between outer tube and stator housing, thread on outlet G / A (BSP / male) Type Delivery rate Delivery head Seal type Material Weight F 0 S-/ TR max. 0 l/min max. bars Mechanical seal in ceramic oxide, o-rings in FPM Bearing flange in aluminium; outer tube, shaft, eccentric worm in stainless steel. ( Ti), kg 0 0 Base plate Base plate 00 00/, kg Eccentric worm-drive pump type F0 SF TR with bearing flange in stainless steel clamp connection between outer tube and stator housing, inlet and outlet Clamp, with PTFE stator Type Delivery rate Delivery head Seal type Material Weight F 0 SF-/ TR max. 0 l/min max. bars Mechanical seal in SiC, o-rings in FPM (food grade) Bearing flange, outer tube, shaft, eccentric worm in stainless steel. ( Ti), kg /, kg Hose connection complete with union nut or clamp for pumps type F 0 S TR and F 0 SF TR Union nut G / DN DN DN Union nut G DN DN Clamp DN DRIVE MOTORS FOR ECCENTRIC WORM-DRIVE PUMP TYPE E F 0 S-/ TR AND F 0 SF-/ TR Three-phase motors 0/00 Volt, 0 Hz, jet-proof to IP, with cable terminal box, without cable Capacity Speed Weight 0, kw 90 rpm, kg , kw 00 rpm,0 kg 00 0, kw 90 rpm,0 kg , kw 00 rpm,0 kg 00 0 ECCENTRIC WORM-DRIVE PUMPS TYPE F 0 S TR

16 FLUX SCREW PUMP TYPE F 0 S IN BARREL PUMP VERSION AND IN VERSION WITH BEARING FLANGE Recommended for transferring: thin to medium viscosity liquids up to a max. viscosity of mpas (^=cp). AC motor F 0 for F 0 S-/ Three-phase motor for F 0 S-0/ Typical applications: Version with bearing flange robust pump design suitable for viscosities up to mpas (^=cp). The screw pumps type F 0 S in contrast to the F 0 and F 0 series pumps are not a positive displacement pump design.this allows pumping operations against a closed outlet. The pump type F 0 S is also available in a special version with A approval: ground, polished, equipped with a closed mechanical seal in stainless steel, slidicing faces in silicium carbide (SiC). Available drive motors: Three-phase electric motors or compressed air motors. SCREW Seal types: Mechanical seal Scope of supply: A complete screw pump consists of: drive motor, pump and hose connection. F 0 S-/ F 0 S-0/ Pumps Viscosity Curve Type mpas (^=cp) Nr. F 0 S-0/ F 0 SA-0/ F 0 S-/ Values ± 0% obtained with a speed of 0 rpm F 0 S/SA-0/ Viskosität [mpas] 0.000, ,.000, H [bar],0,,0,,0 F 0 S-0/, F 0 SA-0/ AND F 0 S-/.000 0, 0, 00 Motorleistung in kw 0, Q [l/min] Delivery data for other viscosities on request.

17 SCREW PUMP, BARREL PUMP VERSION AND VERSION WITH BEARING FLANGE Type F 0 S-/ F 0 S-0/ Version barrel pump with bearing flange max. Viscosity.000 mpas (^=cp) mpas (^=cp) Delivery rate max. 0 l/min max. l/min Delivery head max. bars max. bars DRIVE MOTOR FOR SCREW PUMP TYPE F 0 S-/ Single-phase AC motor with capacitor, 0 Volt, 0 Hz, jet-proof to IP, speed 0 rpm, with motor protection switch, m cable and plug Type Capacity Weight F 0/ 0, kw,0 kg SANITARY PUMP, SCREW PUMP TO A-STANDARDS with bearing flange in stainless steel, outlet Clamp FLUX Seal type Mechanical seal in ceramic oxide, o-rings in FPM Material Stainless steel. ( Ti) bearing flange in aluminium; outer tube and shaft in stainless steel. ( Ti) Screw Polyethylene (PE) Stainless steel. ( Ti) outer-ø mm 0 mm /Weight Immersion length 00 mm /, kg 0 00/, kg Immersion length 000 mm /,0 kg 0 00/, kg Immersion length 00 mm 0 0 0/, kg 0 0/, kg Carrying handle Weight,0 kg 00 0 SCREW PUMP TYPE F 0 S Type Version max. Viscosity Delivery rate Delivery head Seal type Material Outer-Ø /Weight Immersion length 00 mm Immersion length 000 mm Immersion length 00 mm F 0 SA-0/ with bearing flange mpas (^=cp) max. l/min max. bars Closed mechanical seal in stainless steel, sliding faces in SiC, o-rings in FPM (food-grade) Bearing flange, outer tube, shaft in stainless steel. ( Ti), ground and polished according to A standards; screw in PTFE 0 mm 0 00/, kg 0 0/, kg 0 0/, kg Hose Connection complete with union nut or clamp for screw pumps type F 0 S and F 0 SA F 0 S-/ DN DN F 0 S-0/ DN DN DN F 0 SA-0/ DN DRIVE MOTORS FOR SCREW PUMPS TYPE F 0 S-0/ AND F0 SA-0/* Three-phase motors 0/00 Volt or 00 Volt at kw, 0 Hz, jet-proof to IP, speed 0 rpm, without cable Capacity Weight Motor with Motor with cable terminal box motor protection switch 0, kw, kg , kw,0 kg , kw,0 kg ,0 kw 0,0 kg Carrying handle Weight,0 kg *special painting white on request.

18 ZONE 0 ECCENTRICC WORM-DRIVE PUMPS APPROVED FOR USE IN HAZARDOUS AREAS ZONE 0, FOR TRANSFERRING HIGH FLAMMABILITY LIQUIDS CLASS IIA AND IIB (Capacities and technical data identical with those of standard versions). The version with stator in PTFE white, suitable for liquids class IIA, is marked with designation XA (Ex II / G IIA T). The version with stator in PTFE black, suitable for liquids class IIB, is marked with designation XB (Ex II / G IIB T). ECCENTRIC WORM-DRIVE PUMP, BEARING FLANGE VERSION, WITH STATOR IN PTFE WHITE EC-TYPE EXAMINATION CERTIFICATE NO. PTB 99 ATEX 00X Type Immersion length 00 mm Immersion length 000 mm Immersion length 00 mm F 0 SXA-0/ F 0 SXA-0/ F 0 SXA-0/ ECCENTRIC WORM-DRIVE PUMP, PLANETARY GEAR VERSION, WITH STATOR IN PTFE WHITE EC-TYPE EXAMINATION CERTIFICATE NO. PTB 99 ATEX 0X Type Immersion length 00 mm Immersion length 000 mm Immersion length 00 mm F 0 GSXA-0/ F 0 GSXA-0/ F 0 GSXA-0/ ECCENTRIC WORM-DRIVE PUMP, BEARING FLANGE VERSION, WITH STATOR IN PTFE BLACK EC-TYPE EXAMINATION CERTIFICATE NO. PTB 99 ATEX 0X Type Immersion length 00 mm Immersion length 000 mm Immersion length 00 mm F 0 SXB-0/ F 0 SXB-0/ F 0 SXB-0/ ECCENTRIC WORM-DRIVE PUMP, PLANETARY GEAR VERSION, WITH STATOR IN PTFE BLACK EC-TYPE EXAMINATION CERTIFICATE NO. PTB 99 ATEX 0X Type Immersion length 00 mm Immersion length 000 mm Immersion length 00 mm F 0 GSXB-0/ F 0 GSXB-0/ F 0 GSXB-0/ 0 0 0

19 FLUX VISCOSITY CHART Media Viscosity Temperature Alkyd resins mpas (^=cp) 0 C Apple-purée.00 mpas (^=cp) 0 C Baby food.00 mpas (^=cp) 0 C Brewers s yeast 0 mpas (^=cp) 0 C Butter mpas (^=cp) 0 C Butter cream, sour 0 mpas (^=cp) 0 C Butter fat mpas (^=cp) 0 C Castor oil.0 mpas (^=cp) 0 C Castor oil mpas (^=cp) 0 C Caustic soda 0% mpas (^=cp) 0 C Chocolate confectionery.00 mpas (^=cp) 0 C Chocolate sauce 0 mpas (^=cp) 0 C Cleaning emulsions.00 mpas (^=cp) 0 C Cocao butter 0 mpas (^=cp) 0 C Cocao paste.000 mpas (^=cp) 0 C Coconut oil 0 mpas (^=cp) 0 C Cod-liver oil mpas (^=cp) 0 C Corn oil 0 mpas (^=cp) 0 C Cotton seed oil 0 mpas (^=cp) 0 C Cream, 0 0% fat mpas (^=cp) 0 C Dental adhesive mpas (^=cp) 0 C Dipropyleneglycol 0 mpas (^=cp) 0 C Evaporated milk 0 mpas (^=cp) 0 C Evaporated milk, sweetened.00 mpas (^=cp) 0 C Fruit juice 0 mpas (^=cp) 0 C Fruit juice concentrate.00 mpas (^=cp) 0 C Fruit mash 00 mpas (^=cp) 0 C Gelatine.00 mpas (^=cp) C Glucose mpas (^=cp) 0 C Glycerine 00%.00 (^=cp) 0 C Glycerine 00%.00 mpas (^=cp) 0 C Glycerine 00%.90 mpas (^=cp) 0 C Glycol 0 mpas (^=cp) 0 C Gravy 0 mpas (^=cp) 0 C Hand creme.000 mpas (^=cp) 0 C Honey.000 mpas (^=cp) 0 C Jam.00 mpas (^=cp) 0 C Lacquers (% pigments).000 mpas (^=cp) 0 C Lard mpas (^=cp) 0 C Latex emulsions 00 mpas (^=cp) 0 C Linseed oil mpas (^=cp) 0 C Liqueurs 0 00 mpas (^=cp) 0 C Liquid egg 0 mpas (^=cp) C Liquid soap mpas (^=cp) 0 C Liquid wax 00 mpas (^=cp) 90 C Lubricating oil 0 00 mpas (^=cp) 0 C Machine oil, heavy 00 mpas (^=cp) 0 C Machine oil, light 0 mpas (^=cp) 0 C Malt extract 9.00 mpas (^=cp) 0 C Mayonnaise.000 mpas (^=cp) 0 C Media Viscosity Temperature Molasses 0 Bx mpas (^=cp) 0 C Molasses Bx mpas (^=cp) 0 C Molasses Bx mpas (^=cp) 0 C Motor oil SAE 0W 0 mpas (^=cp) 0 C Motor oil SAE 0.00 mpas (^=cp) 0 C Motor oil SAE 0W 0 mpas (^=cp) 0 C Motor oil SAE 0 0 mpas (^=cp) 0 C Motor oil SAE 0 00 mpas (^=cp) 0 C Motor oil SAE mpas (^=cp) 0 C Motor oil SAE W 0 mpas (^=cp) 0 C Motor oil SAE mpas (^=cp) 0 C Oleic acid 0 mpas (^=cp) 0 C Olive oil mpas (^=cp) 0 C Palm oil 0 mpas (^=cp) 0 C Paraffin emulsion.000 mpas (^=cp) 0 C Peanut oil 0 mpas (^=cp) 0 C Polyester resin.000 mpas (^=cp) 0 C Polyglycerine caprinate mpas (^=cp) C Polymer solution mpas (^=cp) 0 C Polyol (A-Component).000 mpas (^=cp) 0 C Polyol, non-pigmented mpas (^=cp) 0 C Potassium hydroxide mpas (^=cp) 0 C Printing ink (and colours) 0.00 mpas (^=cp) 0 C Pudding.000 mpas (^=cp) 0 C Rapeseed oil 0 mpas (^=cp) 0 C Resin solution.00 mpas (^=cp) 0 C Salad dressing mpas (^=cp) 0 C Salad oil mpas (^=cp) 0 C Shampoo.000 mpas (^=cp) 0 C Soft cheese mpas (^=cp) 0 C Soybean oil 0 mpas (^=cp) 0 C Soybean oil, treated mpas (^=cp) 0 C Starch solution Baumé 00 mpas (^=cp) 0 C Steam turbine oil mpas (^=cp) 0 C Sugar solution Bx 0 mpas (^=cp) 0 C Sugar solution 0 Bx 00 mpas (^=cp) 0 C Tomato ketchup.000 mpas (^=cp) 0 C Tomato paste 9 mpas (^=cp) 0 C Tooth paste mpas (^=cp) 0 C Train oil 00 mpas (^=cp) 0 C Transformer oil 0 mpas (^=cp) 0 C Transformer oil mpas (^=cp) 0 C Vegetable soup 0 mpas (^=cp) 0 C Vitamin oil.00 mpas (^=cp) 0 C Water-based lacquer 900 mpas (^=cp) 0 C Whey mpas (^=cp) 0 C Whipped foods.00 mpas (^=cp) 0 C White oil 00 mpas (^=cp) 0 C Yogurt 0 mpas (^=cp) 0 C ZONE 0 VISCOSITY CHART The media listed above have to be considered as examples only, as their viscosity may change substantially due to different composition and/or other temperatures. An in-service test will provide the utmost certainty in selecting the most suitable pump type. This applies especially to Non-Newtonian liquids, the exact viscosity of which is difficult to define and may change during pumping operation (intrinsic viscosity). FLUX sales representatives will always be at your disposal for an individual demonstration. 9

20 WORLD OF PUMPS PUMPS FOR THE WORLD All around the globe, FLUX is synonymous with top standards in pump technology. Whether it is barrel pumps, high viscosity liquid pumps, vertical centrifugal immersion pumps, air-operated diaphragm pumps, liquid meters, mixers or top class accessories FLUX with its complete and comprehensive range is always the one to address to. Benefit from our competence. We look forward to hearing from you! Distributed by: F00 0/ E