SANITARY PRODUCTS. SMITH-COOPER INTERNATIONAL TOLL FREE FAX (323)
|
|
|
- Annabelle Porter
- 6 years ago
- Views:
Transcription
1 SNITRY PRODUCTS SMITH-COOPR TRNTIONL TOLL R X (323)
2 Standardized oxes IMPROVS RCIVG ND DISTRIUTION STNDRDIZD CRTON SIZS PICTUR O PRODUCT ON CH LL R COD ON CH LL NR OXS LLD STNDRDIZD OX QUNTITIS Markings on ittings MRKGS ON VRY ITTG SCI LOGO 3 LOGO HT NUMR COUNTRY O ORG 2 SMITH-COOPR TRNTIONL TOLL R X (323)
3 Sanitary Weld ittings Stainless Steel Sanitary Tubing...2 Sanitary Clamp nd ittings Clamp nd Gaskets...6 Tube Hangers...6 Stainless Steel Tube Size Plate lange...6 Sanitary utterfly Valve...7 Sanitary Products Table of Contents Specifications Sanitary ittings and Tubing are 3- approved Stainless Steel tubing dimensions and materials conform to STM 269 / 270 and 3- approved Stainless Steel Plate langes made from STM 240 (Plate) or cast in conformance with STM 351 Material Test Reports available Manufacturing acility are ISO SCI Quality Plus Quality control inspections both at the overseas factory and our US warehouses Company engineer available at your request $10,000,000 product liability insurance SCI 5/50 guarantee Pro Pak System makes products easier to handle and warehouse Orders shipped with in 24 hours ax confirmation of every order Knowledgeable customer service personnel N66 all Valve...8 Series 66 all Valve...9 Series D88 Diverter all Valve...10 Series 77 3-Way or 4-Way all Vavle...11 Series 66 Tank ottom Valve...12 utomation...13 Warranty and Limitations of Liability SMITH-COOPR TRNTIONL (SCI) warrants to its initial purchaser only, that its products which are delivered to this initial purchaser will be of the kind described in the order or price list and will be free of defects in workmanship or material for a period of five years from the date of delivery to our initial purchaser. Should any failure to conform to this warranty appear within five years after the date of the initial delivery to our initial purchaser, SCI will, upon written notification thereof and substantiation that the goods have been stored, installed, maintained and operated in accordance with recognized engineering and piping practices and industry standards, correct such defects by suitable repair or replacement (which alternative shall be at the discretion of SCI) of product at SCI s own expense upon return of the defective part to SCI. In the event that SCI elects to replace the defective product, SCI shall pay up to $50 per defective product for total cost of replacement. In the event of multiple claims, such payment shall be no greater than $1,000 for each installation project. This warranty applies only during normal use that meets the above referenced conditions of installation and operation and is absolutely void if the product has been damaged after purchase or if it has been misused, repaired, altered or modified in any manner whatsoever. SCI shall not warranty any of its products if any portion of the product including without limitation, any component, gasket, housing or bolt has been modified, altered, remanufactured or replaced in any manner by any customer, user of the product or third party. Correction of non-conformities, in the manner and for the period of time provided above, shall constitute fulfillment of all liabilities of SCI to our initial purchaser, with respect to the goods, whether based on contract, negligence, strict tort, or otherwise. It is the intention of SCI that no warranty of any kind, whether expressed or implied shall pass through our initial purchaser to any other person or corporation. No returns will be allowed unless prior written permission of SCI is first obtained. uyers shall be responsible for all costs of transportation as well as a restocking charge. This warranty is exclusively for the benefit of the initial purchaser of this product from SCI and, except to the extent prohibited by applicable law, the foregoing warranty is in lieu of all other warranties, express or implied, including but not limited to warranties of fitness or merchantability. LIMITTIONS O LIILITY: SCI shall not under any circumstances be liable for special or consequential damages such as, but not limited to damage to loss of other property or equipment, loss of profits or revenue, cost of capital, cost of purchased or replacement goods, claims of customers of our initial purchaser, any labor cost for repair or replacement of the product or damage caused by the product. The remedies of our initial purchaser, and all others, set forth herein are exclusive, and the liability of SCI with respect to same shall not, except as expressly provided herein, exceed SMITH-COOPR the price of the SCI products TRNTIONL on which such liability is based. TOLL R X (323)
4 Sanitary ittings - Weld nds ig. S77L2S4 & S77L2S6 90 Tube end (Long Radius) Tube OD Packing L 1 S77L2S4010 S77L2S /2 S77L2S4014 S77L2S S77L2S4020 S77L2S /2 S77L2S4024 S77L2S S77L2S4030 S77L2S S77L2S4040 S77L2S S77L2S4060 S77L2S ig. S772WCL4 & S772WCL6 90 Tube end (Short Radius) Tube OD Packing L 1/2 - S772WCL /4 - S772WCL S772WCL4010 S772WCL /2 S772WCL4014 S772WCL S772WCL4020 S772WCL /2 S772WCL4024 S772WCL S772WCL4030 S772WCL S772WCL4040 S772WCL S772WCL4060 S772WCL ig. S77L2KS4 & S77L2KS6 45 Tube end (Long Radius) Tube OD Packing L 1/2 - S77L2KS /4 - S77L2KS S77L2KS4010 S77L2KS /2 S77L2KS4014 S77L2KS S77L2KS4020 S77L2KS /2 S77L2KS4024 S77L2KS S77L2KS4030 S77L2KS S77L2KS4040 S77L2KS ig. S77L7W4 & S77L7W6 Tee Tube OD Packing L 1/2 - S77L7W /4 - S77L7W S77L7W4010 S77L7W /2 S77L7W4014 S77L7W S77L7W4020 S77L7W /2 S77L7W4024 S77L7W S77L7W4030 S77L7W S77L7W4040 S77L7W S77L7W4060 S77L7W SMITH-COOPR TRNTIONL TOLL R X (323)
5 Sanitary ittings - Weld nds & Sanitary Tubing ig. S77L31W4 & S77L31W6 Concentric Reducer Tube OD Packing L 3/4 x 1/2 - S77L31W /2 x 1 S77L31W S77L31W x 1 S77L31W S77L31W x 1-1/2 S77L31W S77L31W /2 x 1-1/2 S77L31W S77L31W /2 x 2 S77L31W S77L31W x 1 S77L31W S77L31W x 1-1/2 S77L31W S77L31W x 2 S77L31W S77L31W x 2-1/2 S77L31W S77L31W x 1-1/2 S77L31W S77L31W x 2 S77L31W S77L31W x 2-1/2 S77L31W S77L31W x 3 S77L31W S77L31W x 3 S77L31W S77L31W x 4 S77L31W S77L31W ig. S77L32W4 & S77L32W6 ccentric Reducer Tube OD Packing L 1-1/2 x 1 S77L32W S77L32W x 1-1/2 S77L32W S77L32W /2 x 1-1/2 S77L32W S77L32W /2 x 2 S77L32W S77L32W x 1 S7732W S7732W x 1-1/2 S77L32W S77L32W x 2-1/2 S77L32W S77L32W x 1-1/2 S77L32W S77L32W x 2 S77L32W S77L32W x 2-1/2 S77L32W S77L32W x 3 S77L32W S77L32W x 3 S77L32W S77L32W x 4 S77L32W S77L32W ig. S62TP4 & S62TP6 Sanitary Tubing Tube OD Wall Thickness I.D. Tube Length T L/T 1/2 S62TP46004 S62TP /4 S62TP46006 S62TP S62TP46010 S62TP /2 S62TP46014 S62TP S62TP46020 S62TP /2 S62TP46024 S62TP S62TP46030 S62TP S62TP48040 S62TP S62TP49060 S62TP SMITH-COOPR TRNTIONL TOLL R X (323)
6 Sanitary ittings - Clamp nd ig. S772CMP4 & S772CMP6 90 lbow Tube OD Packing L 1/2 - S772CMP /4 - S772CMP S772CMP4010 S772CMP /2 S772CMP4014 S772CMP S772CMP4020 S772CMP /2 S772CMP4024 S772CMP S772CMP4030 S772CMP S772CMP4040 S772CMP S772CMP4060 S772CMP ig. S772KMP4 & S772KMP6 45 lbow Tube OD Packing L 1/2 - S772KMP /4 - S772KMP S772KMP4010 S772KMP /2 S772KMP4014 S772KMP S772KMP4020 S772KMP /2 S772KMP4024 S772KMP S772KMP4030 S772KMP S772KMP4040 S772KMP ig. S777MP4 & S777MP6 Tee Tube OD Packing L 1/2 - S777MP /4 - S777MP S777MP4010 S777MP /2 S777MP4014 S777MP S777MP4020 S777MP /2 S777MP4024 S777MP S777MP4030 S777MP S777MP4040 S777MP S777MP4060 S777MP ig. S777RMP4 & S777RMP6 Tee Tube OD Packing L 1 x 1/2 - S777RMP x 3/4 - S777RMP /2 x 1 S777RMP S777RMP x 1 S777RMP S777RMP x 1-1/2 S777RMP S777RMP /2 x 1 S777RMP S777RMP /2 x 2 S777RMP S777RMP x 1-1/2 S777RMP S777RMP x 2 S777RMP S777RMP x 2-1/2 S777RMP S777RMP x 1-1/2 S777RMP S777RMP x 2 S777RMP S777RMP x 2-1/2 S777RMP S777RMP x 3 S777RMP S777RMP SMITH-COOPR TRNTIONL TOLL R X (323)
7 Sanitary ittings - Clamp nd ig. S773114MP4 & S773114MP6 Concentric Reducer Tube OD Packing L 1 x 3/4 - S773114MP x 1 S773114MP S773114MP x 1-1/2 S773114MP S773114MP /2 x 1-1/2 S773114MP S773114MP x 1-1/2 S773114MP S773114MP x 2 S773114MP S773114MP x 2-1/2 S773114MP S773114MP x 2 S773114MP S773114MP x 2-1/2 S773114MP S773114MP x 3 S773114MP S773114MP ig. S773214MP4 & S773214MP6 ccentric Reducer Tube OD Packing L 2 x 1-1/2 S773214MP S773214MP /2 x 2 S773214MP S773214MP x 1-1/2 S773214MP S773214MP x 2 S773214MP S773214MP x 2-1/2 S773214MP S773214MP x 2 S773214MP S773214MP x 2-1/2 S773214MP S773214MP x 3 S773214MP S773214MP ig. S7721MP4 & S7721MP6 Male dapter Tube OD Packing L 1 x 3/4 S7721MP S7721MP x 1 S7721MP S7721MP /2 x 1 S7721MP S7721MP /2 x 1-1/2 S7721MP S7721MP /2 x 2 S7721MP S7721MP x 2 S7721MP S7721MP x 1-1/2 S7721MP S7721MP x 1-1/4 S7721MP S7721MP x 1-1/2 S7721MP S7721MP x 2 S7721MP S7721MP x 2-1/2 S7721MP S7721MP x 3 S7721MP S7721MP x 3 S7721MP S7721MP x 4 S7721MP S7721MP ig. S7722MP4 & S7722MP6 emale dapter Tube OD Packing /L Inner Master L 1 x 3/4 S7722MP S7722MP x 1 S7722MP S7722MP /2 x 1 S7722MP S7722MP /2 x 1-1/2 S7722MP S7722MP /2 x 2 S7722MP S7722MP x 1-1/2 S7722MP S7722MP x 2 S7722MP S7722MP x 1-1/2 S7722MP S7722MP x 2 S7722MP S7722MP x 2-1/2 S7722MP S7722MP x 3 S7722MP S7722MP x 3 S7722MP S7722MP x 4 S7722MP S7722MP SMITH-COOPR TRNTIONL TOLL R X (323)
8 Sanitary ittings - Clamp nd ig. S7716MP4 & S7716MP6 Solid nd Cap Tube OD Packing L 1/2 & 3/4 - S7716MP &1-1/2 S7716MP4014 S7716MP S7716MP4020 S7716MP /2 S7716MP4024 S7716MP S7716MP4030 S7716MP S7716MP4040 S7716MP C ig. S7714WMP4 & S7714WMP6 Short-Weld errule Tube OD C Packing L 1/2 - S7714WMP /4 - S7714WMP S7714WMP4010 S7714WMP /2 S7714WMP4014 S7714WMP S7714WMP4020 S7714WMP /2 S7714WMP4024 S7714WMP S7714WMP4030 S7714WMP S7714WMP4040 S7714WMP C ig. S77L14M74 & S77L14M76 Long-Weld errule Tube OD C Packing L 1/2 - S77L14M /4 - S77L14M S77L14M74010 S77L14M /2 S77L14M74014 S77L14M S77L14M74020 S77L14M /2 S77L14M74024 S77L14M S77L14M74030 S77L14M S77L14M74040 S77L14M ig. S7714RMP4 & S7714RMP6 Recessless (Roll-On) errule Tube OD Packing L 1 S7714RMP4010 S7714RMP /2 S7714RMP4014 S7714RMP S7714RMP4020 S7714RMP /2 S7714RMP4024 S7714RMP S7714RMP4030 S7714RMP S7714RMP4040 S7714RMP ig. S7713MHHM4 Heavy Duty Clamp Tube OD Packing 304 Inner Master L 1/2 & 3/4 S7713MHHM & 1-1/2 S7713MHHM S7713MHHM /2 S7713MHHM S7713MHHM S7713MHHM S7713MHHM SMITH-COOPR TRNTIONL TOLL R X (323)
9 Sanitary ittings - Tube Hangers PDM & una-n PT ig. S7740MP, S7740MPG & S7740MPU Gaskets PDM Gasket* PT Gasket Size -55 to to 450 UN-N Gasket -30 to 200 1/2 S7740MP004 S7740MPG004 S7740MPU004 3/4 S7740MP006 S7740MPG006 S7740MPU006 1 S7740MP010 S7740MPG010 S7740MPU /2 S7740MP014 S7740MPG014 S7740MPU014 2 S7740MP020 S7740MPG020 S7740MPU /2 S7740MP024 S7740MPG024 S7740MPU024 3 S7740MP030 S7740MPG030 S7740MPU030 4 S7740MP040 S7740MPG040 S7740MPU040 6 S7740MP060 S7740MPG060 S7740MPU060 *Do not use with any hydrocarbons. ig. S77TH4P4 Hanger with Sleeves Tube OD 1 S77TH4P /2 S77TH4P S77TH4P /2 S77TH4P S77TH4P S77TH4P S77TH4P L ig. S77TH4R Hanger with Grommets Tube OD 1 S77TH4R /2 S77TH4R S77TH4R /2 S77TH4R S77TH4R S77TH4R S77TH4R L ID T OD Tube Plate langes Tube Plate lange Tube OD s Outside Inside olt Holes Thickness Number of olt Circle Size Diameter Diameter Diameter (T) olt Holes L (OD) (ID) 1 S1414SOTP010 S1416SOTP /2 S1414SOTP014 S1416SOTP S1414SOTP020 S1416SOTP /2 S1414SOTP024 S1416SOTP S1414SOTP030 S1416SOTP S1414SOTP040 S1416SOTP S1414SOTP060 S1416SOTP S1414SOTP080 S1416SOTP S1414SOTP100 S1416SOTP S1414SOTP120 S1416SOTP SMITH-COOPR TRNTIONL TOLL R X (323)
10 TM V L V S Sharpe Valves Series 15 Sanitary utterfly Valve Port: Tube Port Size: 1 to 4 Material: 304 Stainless Steel nds: Clamp nds Pressure: 150 PSI Temperature: stainless steel precision milled body Sharpe Logo, Material Grade, Size, Heat Number and Country of Origin engraved on each valve body Disc fully machined and polished Pull handle 4 position, lue 12 position handle, Stainless Steel 12 position Handle Hygienic seating design utomation available upon request L No. Part Name Material 1 Handle Plastic 2 Gripper Stainless Steel 3 ody 304SS 4 Disc 304SS 5 Seat PDM 6 olt 304SS D 6 D 5 4 Nominal Tube Size Part Number 1 SV154CC /2 SV154CC SV154CC /2 SV154CC SV154CC SV154CC D L 7 Listed is for 304 SS ody, PDM Seat, Tri Clamp nds, 25 R inish, and 12 Position Handle. Other configurations available upon request SMITH-COOPR TRNTIONL TOLL R X (323)
11 TM V L V S Sharpe Valves Series N66 all Valve Port: ull Tube Port Size: 1/2 to 2-1/2 Material: 316 Stainless Steel nds: Tri-Clamp nds, xtended utt Weld, Short utt Weld Pressure: 1000 PSI Temperature: Piece design High cycle stem design Integral ISO 5211 mounting pad Lockable handle lever or oval handle Hygienic seating design Live loaded stem packing low out proof stem Cavity-illed Seats vailable No. Part Name Material 1 ody C8M 2 nd Cap C8M 3 all Seats TM 5 ody Gasket PT 6 Stem Gland Packing PT 8 Gland Stainless Steel 9 Handle Stainless Steel 10 Stem Washer Stainless Steel 11 Stem Nut Stainless Steel 12 olts Washer Stainless Steel 13 olts Nut Stainless Steel 14 olts Stainless Steel 15 Cover P.V.C. 16 Thrust Washer PT 17 elleville Stainless Steel 18 Gland Nut Stainless Steel 19 Lock Tab Stainless Steel 20 Stop Pin Stainless Steel D K P M J L N H 15 Nominal Tube Size D 1/2 SVN6666MTC M /4 SVN6666MTC M SVN6666MTC M /2 SVN6666MTC M SVN6666MTC M /2 SVN6666MTC M H J K L M N P Part number listed is for configuration listed on this page with clamp ends. full listing of configurations can be found at SMITH-COOPR TRNTIONL TOLL R X (323)
12 TM V L V S Sharpe Valves Series 66 all Valve No. Part Name Material 1 ody C3M 2 all SS 316L 3 Seats TM 4 ody Seals TM 5 Tri-Clamp nds C3M 6 ody olts SS Seal Protector TM 8 Thrust Washer TM 9 Stem Packing TM 10 Lower Lock Latch Stainless Steel 10 Lower Lock olt Stainless Steel 11 Upper Lock Latch Stainless Steel 12 Stem SS 316L 13 Gland Packing Stianless Steel 14 elleville Washer Stainless Steel 15 Packing Nut Stainless Steel 16 Lock Tab Stainless Steel 17 Stem Nut Stainless Steel 18 Lock Washer Stainless Steel 19 Handle Stainless Steel 20 Wrench lock Stainless Steel 21 Hex head olt Stainless Steel Nominal Tube Size C 20 Port: ull Tube Port Size: 1/2 to 4 Material: 316L Stainless Steel nds: Tri-Clamp nds, xtended utt Weld, Short utt Weld Pressure: 1480 PSI Temperature: Piece Design High Cycle Stem Packing ncapsulated ody olts Integral ISO Mounting Pad Lockable, Lever, xtended or Oval Handle Hygienic Seating Design low Out Proof Stem Cavity-illed Seats vailable /2 SV6666MTC /4 SV6666MTC SV6666MTC /2 SV6666MTC SV6666MTC /2 SV6666MTC SV6666MTC SV6666MTC Part number listed is for configuration listed on this page with clamp ends. full listing of configurations and flow plans can be found at 21 SMITH-COOPR TRNTIONL TOLL R X (323) C HNDL OR SIZ 2 1/2"-4" G ØJ ØG ØH H J
13 TM V L V S Sharpe Valves Series D88 all Valve No. Part Name Material 1 ody C3M 2 ody olts Stainless Steel 3 all C8M 4 Seats PT 5 ody Seals PT 6 Tri-Clamp nd C3M 7 ody Nuts C8M 8 Seal Protector PK 9 Thrust Washer PK 10 Stem Packing PT 11 Lower Lock Latch Stainless Steel 11 Lower Latch olt Stainless Steel 12 Upper Latch olt Stainless Steel 13 Stem C8M 14 Gland Packing C8M 15 elleville Washer Stainless Steel 16 Packing Nut Stainless Steel 17 Lock Tab Stainless Steel 18 Stem Nut Stainless Steel 19 Lock Washer Stainless Steel 20 Handle Stainless Steel 21 Stop olt Stainless Steel 22 Wrench lock Stainless Steel 23 Hex Head olt Stainless Steel Port: Tube ull Port Size: 1/2 to 4 Material: 316L Stainless Steel nds: Tri-Clamp nds, xtended utt Weld, Short utt Weld Pressure: 1480 PSI Temperature: 450 SM/P compliant 3- Piece design High cycle stem design ncapsulated body bolts Variety of seats, seals and aseptic end connections Integral mounting pad Lockable, lever, extended or oval handle ll wetted parts polished to R Optional 8-10 R electro polish Optional purge ports available Nominal Tube Size 1/2 SVD8866RTCP /4 SVD8866RTCP SVD8866RTCP /2 SVD8866RTCP SVD8866RTCP /2 SVD8866RTCP SVD8866RTCP SVD8866RTCP Part number listed is for configuration listed on this page with the addition of a L-Port 90 Turn all and 240 Grit Clamp nds. full listing of configurations and flow plans can be found at SMITH-COOPR TRNTIONL TOLL R X (323) G H J K
14 TM V L V S Sharpe Valves Series 77 3-Way or 4-Way all Valve Size: ull Port 1/2 to 4 Material: 316 Stainless Steel nds: Tri-Clamp nds, xtended utt Weld, Short utt Weld Pressure: 600 PSI Temperature: 450 SM 16.5 SM Seat design Double stem seals; stem design Trunnion-supported ball for 2 and larger ISO 5211 mounting pad T, L, and double L balls Live loaded stem packing low out proof stem ØL 20 ØK OLT CIRCL No. Part Name Material 1 ody C8M 2 Cap C8M 3 all C8M 4 Seats TM/RT /2 5 ody Gasket PT 6 olt Washer Stainless Steel 7 olt HNDL OR 1-1/2"-4" J 8 Low Thrust Washer 50% SS Powder / G 50% PT HNDL OR 1/2"-1" 21 G 19 9 Compression Ring SS Upper Thrust Washer TM V-Ring Stem Packing PT Thrust Washer 50% SS Powder / 10 50% PT nti-static Stem 276 Type R Gland Stainless Steel 8 14 H 15 elleville Washer SS olt Nut Stainless Steel 17 Handle Stainless Steel ØD ØC Ø 18 Handle Sleeve Vinyl 19 Lock Saddle Stainless Steel 20 Triangle Stopper Stainless Steel 21 Stop olt Nominal Tube Size 11 C D 1/2 SV7766MT6G /4 SV7766MT6G SV7766MT6G /2 SV7766MT6G SV7766MT6G /2 SV7766MT6G SV7766MT6G SV7766MT6G Part number listed is for configuration listed on this page with the addition of a L-Port 90 Turn all and 240 Grit Clamp nds. full listing of configurations and flow plans can be found at SMITH-COOPR TRNTIONL TOLL R X (323) G H J K L
15 TM STCOD STCOD STCOD STCOD V L V S Sharpe Valves Series 66 Tank ottom Valve Port: ull Tube Port Size: 1/2 to 4 Material: 316L Stainless Steel nds: Tri-Clamp nds, xtended utt Weld, Short utt Weld Pressure: 1480 PSI Temperature: 450 No. Part Name Material 1 ody C3M 2 lush ottom lange C3M 3 all SS 316L 4 Seats TM 5 ody Seals TM 6 Tri-Clamp nds C3M 7 ody olts SS Seal Protector TM 9 Thrust Washer TM 10 Stem Packing PT 11 Lower Lock Latch Stainless Steel 11 Lower Lock olt Stainless Steel 12 Upper Lock Latch Stainless Steel 13 Stem SS 316L 14 Gland Packing Stainless Steel 15 elleville Washer Stainless Steel 16 Packing Nut Stainless Steel 17 Lock Tab Stainless Steel 18 Stem Nut Stainless Steel 19 Lock Washer Stainless Steel 20 Handle Stainless Steel 21 Stop olt Stainless Steel 22 Wrench lock Stainless Steel 23 Hex head olt Stainless Steel Nominal Tube Size 21 C D 3-Piece design High cycle stem packing ncapsulated body bolts Variety of seats and seals Integral ISO mounting pad Lockable, lever, extended or oval handle Hygienic seating design low out proof stem lush pad made from solid bar stock Optional purge ports available 1/2 SV6666TTC /4 SV6666TTC SV6666TTC /2 SV6666TTC SV6666TTC /2 SV6666TTC SV6666TTC SV6666TTC Part number listed is for configuration listed on this page with the addition of a L-Port 90 Turn all and 240 Grit Clamp nds. full listing of configurations and flow plans can be found at SMITH-COOPR TRNTIONL TOLL R X (323) ØK D C G HNDL OR SIZ 2 1/2"-4" 12 H ØJ ØG ØH J K
16 TM V L V S Sharpe utomation SPN II - Nickel Plated Pneumatic ctuator Traditional Two - piston, rack and pinion design vailable in Double cting and Spring Return configurations Hard nodized luminum body, Rugged Polyester coated body, with poxy Coated nd Caps, with optional Nickel Infused coating for sanitary applications Standard Temperature Range with una O Rings: -4 to 180 Kits for low temp (-40 to 80) and high temperature (+5 300) Industry Standard ISO 5211 drilling and NMUR patterns i-directional Travel Stops for +/- 5 adjustment for precise control Pinion is specially designed to accept butterfly valve shafts With Inserts that allows for Direct Mounting capabilities to utterfly Valves that have Square, Double D, or Keyed shaft designs Mounting plates available, allowing for mounting to different industry standard bolt circles 4x4 - Pneumatic ctuator Unique our - piston, rack and pinion design nodized Interior and xterior aluminum body, Polyurethane painted body, and poxy coated end caps With Industry Standard ISO 5211 drilling and NMUR Multi-unction Visual Indicator can be used for Three Way indication i-directional Travel Stops for +/- 5 adjustment for precise control vailable in Double cting and Spring Return configurations Nested spring sets, with appropriate centering rings on piston face and end caps our Pistons allow for shorter travel and faster response times Reduced size means less air consumption, reducing costs with quicker response Generates more torque for reduced cost, size and air consumption Pinion is supported by four pistons; as a result, piston side load is minimized S III - lectric ctuator NM 4X: Waterproof and dust-proof enclosure nclosure material: Dry powder coating aluminum alloy Standard extended duty cycle induction motor insulation class for all models uilt-in thermal protection (275 ) prevents motor from burning out ll models have continuous mechanism position indicator on the top of the actuator cover Non-clutch design, the manual operation can be operated without any lever, clutch or brake upon power outage When electric motor is operating, manual hand-wheel will not rotate for safety purposes High alloy steel gear trains provide self-locking function to avoid valve back drive Gear trains have been already lubricated sufficiently with anti-high temperature lubricant at the factory Working conditions: ambient temperature: -22 to 149 and humidity: 30% to 95% 13 SMITH-COOPR TRNTIONL TOLL R X (323)
17 150# ittings 304 & 316 1/8 4 Weld ittings 304L & 316L Sch 10, 40 & 80 1/2-12 Nipples 304L & 316L Sch 40 Welded & Sch 80 Seamless 1/8-4 Diameter Close - ny Length Pipe & Sanitary Tubing Pipe, 304/304L & 316/316L Sch 10, 40 & 80 Welded & Seamless 1/8-8 Sanitary Tubing 1-4 langes 304/304L & 316/316L 150# & 300# 1/ # orged ittings 304L & 316L Threaded & Socket Weld 1/8-4 elled-nd ittings 304L & 316L 1/2-2 Valves 316/316L Cast and orged 150#, 200#, 300#, 600#, 800# all, Gate, Globe, & Check 1/4-12 Grooved ittings 304L & 316L Sch 10 & Sch /2-12 Compression ittings 316 Stainless Double errule Instrumentation Tubing 304/304L & 316/316L Welded & Seamless 1/16-1 abrication & Machining langed ittings made to order Custom machining of flanges Specialty ittings 316 King Combo Nipples Weld Spuds Hex Nipples CORPORT OIC TL (800) LOCL (323) X (323) SMITH-COOPR TRNTIONL TOLL R X (323)
Carbon Steel Nipples
CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 WWW.SMITHCOOPER.COM FAX (323) 890-4456 Carbon Steel Nipples Schedule 40 & 80 Welded, Schedule 80 Seamless, & XXH Seamless Carbon Steel Nipples Specifications
Manufacturing Facility is ISO9001:2000. Welded Steel Pipe Conform to ASTM A53. Threads Conform to ASME B1.20.1
STEEL NIPPLES S40 & S80 Steel Nipple Product Specifications Manufacturing Facility is ISO9001:2000 Welded Steel Pipe Conform to ASTM A53 Threads Conform to ASME B1.20.1 800-678-2544 800-678-0857 www.msi-products.com
SMITH-COOPER INTERNATIONAL TOLL FREE (800) FAX (323)
SMITH-OOPR TRNTIONL TOLL R (800)-766-0076 X (323) 890-4456 www.smithcooper.com 1 Standardized oxes Improves receivg and distribution Standardized carton sizes Picture of product on each label ar code on
STAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications
STAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications Manufactured in ISO9000:2000 Facility Manufactured to ASTM/ASME A182/SA182 Items conform
You get it All. Quality products are not enough. Standardized carton sizes. Large. The benchmark of packaging
Stainless Steel You get it ll. It s not just a quality product - it s a quality system Quality products are not enough. ecause if you want every product to be a quality product, you need a quality system.
Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
Sanitary Fittings & Tubing
anitary Fittgs & ubg pecifications anitary tubg is 3- approved taless steel sanitary tubg dimensions and materials conform to M 269/270 and 3- pproved taless steel plate flanges made from M 240 (Plate)
CSSDR-1. C Series Carbon Steel Bar Stock Ball Valves 4.1
Series arbon Steel ar Stock all Valves Lockout hole diameter is 8mm SSR-1 Reduced port NPT ends to NS 1.2.1 One piece body lowout-proof stem 2 p.s.i., W.O.G. omplies with N MR-13 N MR-175/SO 15156 4.1
Product Guide MAS CA 08/05
Product Guide MS 8/5 www.mastewart.com ontents series ball valves -1: full/large port, 2 piece, NPT 1.1-2: full port, 2 piece, solder end 1.1-3: full port, 2 piece, NPT 1.2-4: full port, 2 piece, solder
SERIES 7400 THREE PIECE BALL VALVES
SERIES 7400 THREE PIECE BALL VALVES Publication S7400-101E Issue 05/16 SERIES 7400 Body Stainless Steel (A351-CF8M) Carbon Steel (A216-WCB) Seat TFM* RPTFE PEEK ALTA Stem 316 Stainless Steel ISO 5211 Mounting
GRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description
Technical Services -00- +-0--0 www.grinnell.com GRINNELL Model B0 and Model BN0 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Models B0 and BN0
Valves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE
Valves, Automation & Controls SERIES 88 I PURITY TUBE ULL PORT 3-PIECE BALL VALVE Design & eatures Body Material 316L Stainless Steel ASME / BPE-2009 Designed specifically for the demanding process requirements
SERIES 9000 Double Offset HP Butterfly Valves
SERIES 9000 Double Offset HP Butterfly Valves Publication S9000-101 Issue 5/18 Rev. D DESIGN Design Characteristics STEM DESIGN: Available in square shaft for easy mounting of actuators, levers and gear
SERIES 7100 STANDARD PORT BALL VALVES
SERIES 7100 STANDARD PORT BALL VALVES Publication S7100-101 Issue 12/14 Rev. C SERIES 7100 Body Stainless Steel (A351-CF8M) Carbon Steel (A216-WCB) Stem 316 Stainless Steel ISO 5211 Mounting Plate Seat
G Series Investment Cast Stainless Steel Ball Valves
G Series Investment ast Stainless Steel all Valves G1 E Reduced port NPT ends to NSI 1.2.1 One piece body lowout-proof stem (Ring lock with 1 /4" to 3 /8", Latch lock with 1 /2" to 2") omplies with NE
BALL VALVES 4Evergreen Valve
BALL VALVES 4Evergreen Valve 4E represents Excellent quality, Excellent delivery, Excellent service and all at an Excellent price. 4E valve was founded by a group of enthusiastic people with more than
Ball Valves. Quality Valves at Low Cost
Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct
BC Brake Caliper. (i) MEX (55) QRO (442) MTY (81) DIST. AUTORIZADO
MEX (55) 5 6 QRO (44) 95 7 60 MTY () 54 0 BC Brake Caliper (i) FORM NO. L-0066-B-040 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this
SERIES 7200 FULL PORT BALL VALVES
SERIES 7200 FULL PORT BALL VALVES Publication S7200-101 Issue 05/16 Rev.F Design Body Stainless Steel (A351-CF8M) Carbon Steel (A216-WCB) Stem 316 Stainless Steel ISO 5211 Mounting Plate Seat TFM* RPTFE
SERIES 2100 Resilient Seated Butterfly Valves
SERIES 2100 Resilient Seated Butterfly Valves Publication S2100-101 Issue 06/16 Rev. C Design Characteristics Applications Commercial Heating & Air Conditioning Waste Water & Water Treatment Sea Water
FIGURE 310AM, 310AMSW & 311AM 3-PIECE BALL VALVE
INTRODUCTION This instruction manual includes installation, operation and maintenance information for the figure 310AM, 310AMSW, and 311AM 3-piece 1000CWP, threaded end (NPT) or socket weld end (SW) ball
MANUAL & AUTOMATED BALL VALVES
ESTABLISHED 1991 STEALTH VALVE & CONTROLS LTD. The Application Solution Company Exclusive Stocking Distributor for Valves, Actuators, Instruments and Specialty Products Serving: Industrial, Power, Food
Through-Shaft Clutch-Brake LSCB-32HT, LSCB-32HT, LSCB-44, LSCB-44HT, LSCB-54HT FORM NO. L D-0606 MEX (55) QRO (442)
Through-Shaft Clutch-Brake LSCB-HT, LSCB-HT, LSCB-, LSCB-HT, LSCB-5HT In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject
Quick quarter-turn rotation. High cycle stem design. Integrated mounting pad for actuators. Compact assembly. Complete line of accessories.
36 Series Stainless Steel 2-way ull Port all Valve The 36 is a full port, 36 stainless steel, 3 piece ball valve. t is available with threaded ends (36N), socket weld ends (36S), or quick clamp ends with
CRD610 Automatic Fitting Inserter
CRD610 Automatic Fitting Inserter OPERATIONS MANUAL VERSION 1.2 LAST EDITED 12.12.2018 cleanroomdevices.com 1 Table of Contents Title Page. 1 Table of Contents...2 1.0 General Product & Safety Information....3
,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
COOPLOK Grooved Submittal. Material Specifications
SmithCooper International (SCI) COOPLOK Submittal Directions: Enter in the project information below; then print. Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System:
CLEAN ROOM DEVICES, LLC "WHERE TUBING AND FITTINGS COME TOGETHER"
CLEAN ROOM DEVICES, LLC "WHERE TUBING AND FITTINGS COME TOGETHER" CRD400 Fitting Inserter OPERATIONS MANUAL VERSION 3.1 LAST EDITED 03.08.11 DOCUMENT NUMBER 001 cleanroomdevices.com 1 Table of Contents
DAP-625S and DAP-875S
AIR CHAMP PRODUCTS DAP-625S and DAP-875S (i) FORM NO. L-20078-B-0501 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject
Z-Tech Severe Chemical Service Valves We Put Control Where You Need It.
Z-Tech Severe Chemical Service Valves We Put Control Where You Need It. Z-Tech Series Valves TABLE OF CONTENTS Ball Valves ZT 4 Series: Three Piece Flanged Ball Valve... -3 Pneumatic Actuators and Accessories...
Single, Two & Three-piece Ball Valves. ASME Class 150, 300 & mm mm (¼"- 8")
Single, Two & Three-piece Ball Valves SM Class 1, 300 & 600 8 mm - 200 mm (¼"- 8") Larsen & Toubro (L&T) is a technology, engineering, construction and manufacturing company. Seven decades of strong, customer-focused
3 Piece Full Port Ball Valves, 1 /4-12 Wide Selection of End Connections
Bray High Performance ompany Subsidiary of BRY INTERNTIONL, Inc. 3 Piece Full Port Ball Valves, 1 /4-1 Wide Selection of End onnections Series 7000 & Series 8000 Model 7000-31SS Model 8000-WB Flow-Tek
HP30 Slab Saw Owner s Manual and Operating Instructions
HP30 Slab Saw Owner s Manual and Operating Instructions MADE IN USA Revision 07 09.0 Manual Part No. 67 Caution: Read all safety and operating instructions before using this equipment. This manual MUST
Sanitary Solutions Valves/Product Recovery System Catalog Distributed By:
Sanitary Solutions Valves/Product Recovery System Catalog Distributed By: Air Blow Check Valves SSABCV-Size-Alloy SSABCV-FNPT-Size-Alloy SSABCV-RHB-Size-Alloy Air Blow, Y-Ball, Check Valve Sanitary Solutions
CRD400 Fitting Inserter OPERATIONS MANUAL
CRD400 Fitting Inserter OPERATIONS MANUAL ORIGINAL INSTRUCTIONS VERSION 3.4 LAST EDITED 01.07.2019 www.cleanroomdevices.com 1 Table of Contents Title Page.. 1 Table of Contents... 2 1.0 General Product
Straight-Bore Clutch LSCC-32, 44, 54
Straight-Bore Clutch LSCC-32, 44, 54 1 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change without notice. Technical
2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive
SPN II. S h a r p e T o l l Free (877) F a x (708)
SPN II S h a r p e T o l l Free (877) 774-2773 F a x (708) 562-9250 www.sharpevalves.com 1 SPN II Pneumatic Actuator Rack & pinion design The standard actuator configuration has hard anodized aluminum
Valves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE
Valves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE Design & Features ASME / BPE-2009 Designed specifically for the demanding process requirements found in the pharmaceutical,
AD-7 THERMAL INDICATING AMMETER
AD-7 THERMAL INDICATING AMMETER a nd ACCESSORIES Operating & Instruction Manual HD ELECTRIC COMPANY 1 4 7 5 L A K E S I D E D R I V E W A U K E G A N, I L L I N O I S 6 0 0 8 5 U. S. A. P H O N E 8 4 7.
CLEAN ROOM DEVICES, LLC "WHERE TUBING AND FITTINGS COME TOGETHER"
CLEAN ROOM DEVICES, LLC "WHERE TUBING AND FITTINGS COME TOGETHER" CRD600 Automatic Fitting Inserter OPERATIONS MANUAL VERSION 2.1 LAST EDITED 7.25.14 DOCUMENT NUMBER 001 cleanroomdevices.com 1 Table of
SERIES Way Divert Valve Assembly, 2-inch to 4-inch
SERIES 7300 3-Way Divert Valve Assembly, 2-inch to 4-inch Publication -101 Issue 10/16 Rev.A Electric DC Motor is rated for 100% duty cycle and never requires maintenance The gear assembly comes standard
Parts Manual. Spray Gun Series Master II. Issue /09/2017 Ref. NR ENG
Spray Gun Series Master II Issue 3.2 27/09/2017 Ref. NR-00020-ENG Before starting or carrying out maintenance work on the MASTER II gun, please carefully read all the technical and safety documentation
HP14 Slab Saw Owner's Manual and Operating Instructions
Slab Saw Owner's Manual and Operating Instructions MADE IN USA Revision 112 09.2018 Manual Part No. 1771 Caution: Read all safety and operating instructions before using this equipment. This manual MUST
INSTALLATION, OPERATION & MAINTENANCE MANUAL
Rack & Pinion Pneumatic Actuators INSTALLATION, OPERATION & MAINTENANCE MANUAL QSM, Inc. 127 Village Lane Easley, SC 29642 U.S.A. Ph: (864) 605-0150 Fax: (864) 605-0830 www.tru-flo.com TABLE OF CONTENTS
SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
FIGURE 310A & 311A 3-PIECE BALL VALVE
INTRODUCTION This instruction manual includes installation, operation and maintenance information for the figure 310A, 310ASW, 311A, and 311ASW 3-piece 1000CWP, threaded end (NPT) or socket weld end (SW)
S T C. STC Air Actuated Valves. Fine Quality. Precision Engineered Advanced Design. Excellent Prices. connects fluid power to industrial automation TM
Precision Engineered Advanced Design Catalog No.: PUB09KS STC Air Actuated Valves Fine Quality Excellent Prices connects fluid power to industrial automation Website: StcValve.com STC PNEUMATIC ACTUATED
INTRODUCTION INSTALLATION
INTRODUCTION INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS This instruction manual includes installation, operation and maintenance information for the figure G73 gear operator. The figure G73 is
Level Alert Model Multi-Switch Liquid Level Sensor. Assembly and Installation Instructions
Level Alert Model 2000 Multi-Switch Liquid Level Sensor Assembly and Installation Instructions Kit Form Each unit is provided in kit form with step-by-step instructions, making it extremely easy to custom
Elgin Hydraulic Clutch-Brake ECB-240, Product Number FORM NO. L F FORM NO. L F-0704
Elgin Hydraulic Clutch-Brake ECB-20, Product Number 96225 FORM NO. L-20283-F-070 1 FORM NO. L-20283-F-070 In accordance with Nexen s established policy of constant product improvement, the specifications
SERIES 2200 Replaceable Seat Butterfly Valves
SERIES 2200 Replaceable Seat Butterfly Valves Publication S2200-101 Issue 04/18 Rev. A Design Characteristics Multiple Seat Options VSI offers various seat options including EPDM, NBR, Viton, and others
SLAB SAW SERIES PARTS LIST
SLAB SAW SERIES PARTS LIST MODELS: HP Part# 020 HP20 Part# 02020 HP2 Part# 0202 MADE IN USA MADE IN USA Revision 09.20 Manual Part No. 6269 Caution: Read all safety and operating instructions before using
Parts Manual V100G Vacuum Machine Part #E (SERIAL #1G G )
2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual V100G Vacuum
MEX (55) QRO (442) Web Controls
Web Controls SINGLE AND DUAL ROTOR TENSION CONTROL BRAKES MODELS:,,,, AND INSTALLATION, OPERATION, AND MAINTENANCE INSTRUCTIONS Read this manual carefully, making full use of its explanations and instructions.
Flowmaster K67/K69 Series Sanitary Air-Actuated Valve OPERATION MAINTENANCE & PARTS LIST
Flowmaster K67/K69 Series Sanitary AirActuated Valve OPERATION MAINTENANCE & PARTS LIST GENERAL INSTRUCTIONS DISASSEMBLY AND REASSEMBLY This manual contains disassembly and reassembly instructions with
CLEAN ROOM DEVICES, LLC "WHERE TUBING AND FITTINGS COME TOGETHER"
CLEAN ROOM DEVICES, LLC "WHERE TUBING AND FITTINGS COME TOGETHER" CRD600AF Automatic Fitting Inserter With Auto Feed OPERATIONS MANUAL (Shown with optional alcohol dispenser) 1 VERSION 1.1 LAST EDITED
Durco. Microfinish and General Purpose Threaded BallValves. Ball Valves To Suit All Needs. Bulletin VM-65d
P R E S E N T I N G T H E N E W urco Microfinish and General Purpose Threaded allvalves all Valves To Suit ll Needs ulletin VM-65d Rugged NSI 16.34 esign or Severe Service urco Microfinish ball valves
FCB-450, LCB-600, MCB-800
AIR CHAMP PRODUCTS User Manual FCB-450, LCB-600, MCB-800 Clutch-Brakes (i) In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are
DeZURIK 2-24 (50-600mm) KGN-RSB BI-DIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES
2-24 (50-600mm) KGN-RSB BI-DIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES Instruction D11023 October 2016 Instructions These instructions provide information about KGN-RSB Knife Gate Valves. They are
Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.
Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.
CRD600 Automatic Fitting Inserter
CRD600 Automatic Fitting Inserter OPERATIONS MANUAL VERSION 2.3 LAST EDITED 12.07.2018 cleanroomdevices.com 1 Table of Contents Title Page.. 1 Table of Contents. 2 1.0 General Product & Safety Information...3
Series FS50 Fire Safe API 607 4th Edition Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features Fire Safe API 607 4TH Edition flanged valves
24V Solar Charger. Instructions READ CAREFULLY Garrymore Ln Missoula, MT
24V Solar Charger 9889 Garrymore Ln Missoula, MT 59808 888-687-3552 +1-406-549-0769 www.aquacreek.com Instructions PART #: F-044SCH (For use with Pro Pool, Ranger, Ambassador & Pathfinder) MANDATORY LEAVE
PLEASE ENSURE THE JUMP STARTER IS FULLY CHARGED PRIOR TO FIRST USE.
PLEASE ENSURE THE JUMP STARTER IS FULLY CHARGED PRIOR TO FIRST USE.. (1) RG1000 EMERGENCY JUMP STARTER PORTABLE POWER SUPPLY (1) 3-IN-1 USB CABLE (1) RG1000 EMERGENCY JUMP STARTER PORTABLE POWER SUPPLY
Single-Position Detent Clutch DC Series. (i) MTY (81) MEX (55) QRO (442)
Single-Position Detent Clutch DC Series (i) FORM NO. L-2017-A-001 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject
TRUCK PRODUCT LINE A DIVISION OF DAKOTA FLUID POWER, INC.
TRUCK PRODUCT LINE 2210 Main Ave W, West Fargo, ND 58078 877.410.7072 www.epgdivision.com A DIVISION OF DAKOTA FLUID POWER, INC. ABOUT US About: Engineered Products Group (EPG), a division of Dakota Fluid
Section 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.
Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 84 Grooved Mechanical ouplings SS-5 Rigid oupling... 85 SS-7 Rigid oupling... 86 SS-7X Rigid oupling... 87 SS-8 Flexible oupling...
Parts Manual V100G Vacuum Machine Part #E (SERIAL #1G G )
2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual V100G Vacuum
Dome-Loaded Pressure Reducing BD-Series
Dome-Loaded Pressure Reducing BD-Series *Parts will differ for high pressure valves. Load Piston - Piston - U-cup U-cup Piston 1. Carefully place the u-cup over the neck of the piston. Load Cylinder -
Tri-Clover Manual and Air Actuated Fractional Valves
FVSM-99 Tri-Clover Manual and Air Actuated Fractional Valves Series 650 655 660 CONTENTS Thank you for purchasing an Alfa Laval Product! This manual contains disassembly and assembly instructions, maintenance
Standard Port, Uni-Body Flanged Ball Valves
USA 800-766-0076 Fax 323-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Standard port, Uni-body design
Single Post Caliper Brake VC500
Single Post Caliper Brake VC500 1 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change without notice. Technical
High Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300
ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality
Section G Series 77 High Purity Ball Valve Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Biotechnology, Pharmaceutical and Electronics Processing Industries www.toplineonline.com
Dyna Flood SO / HO. User guide
Dyna Flood SO / HO User guide Contents Introduction...2 Welcome 2 Safety 2 Supplied items 3 Optional extras 3 Installation...4 Mounting 4 Pan and tilt adjustment 6 Fitting a light shaping filter 7 Fitting
SERIES V4A TELESCOPING VALVE
SERIES V4A TELESCOPING VALVE Type 304 Stainless Steel T A B L E O F C O N T E N T S V e n d o r D a t a A p p l i c a t i o n a n d S p e c i f i c a t i o n Installation and Maintenance Instructions Limited
Parts Manual Vermeer/ McLaughlin Mud System 230P
2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual Vermeer/
GRINNELL MODEL CB800 CIRCUIT BALANCING VALVE INSTALLATION & SETTING HANDBOOK
Technical Services 866-500-4768 +-40-78-8220 GRINNELL MODEL CB800 CIRCUIT BALANCING VALVE INSTALLATION & SETTING HANDBOOK AUGUST 20 IH-4500 Table of Contents Contents General Description.... 3 Dimensional
Installation Power Management Unit Battery Cables and Battery Harness
Installation Power Management Unit Battery Cables and Battery Harness Important Safety Messages SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed during installation
MODEL HX. Fail Safe Hydraulic Actuator FEATURES INTRO AVAILABLE SIZES. Hydraulic Actuation
MODEL HX Fail Safe Hydraulic Actuator FEATURES Flexibility Model HX actuators can be adapted to operate valves from any manufacturer (interface information is required) and can be delivered with alternate
Model AS-FM64 Wall Mount. Full Motion Television Wall Mount
Model AS-FM64 Wall Mount Full Motion Television Wall Mount Getting Started Introduction Congratulations on the purchase of your new Audio Solutions AS-FM64 Television Wall Mount. For maximum benefit, please
MaxLite LED Linear HighBay Fixtures
Operating Instructions MaxLite LED Linear HighBay Fixtures General Safety Information To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions,
4-Ton Electric Log Splitter
4-Ton Electric Log Splitter Questions: Support@Powrkraft.com PK65556 2 18ga. @ 20ft, 16ga. @ 50ft, 14 ga. @ 75ft. 12ga @ 100ft, 10ga @ 200ft These are minimum cord requirements. 13-16 Model Number 65556
Parts Manual Vermeer/ McLaughlin Mud System 230P
2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual Vermeer/
Air Actuated Stainless Ball Valves 2-Piece Stainless Steel, Full Port 1/4 to 2 NPT
ir ctuated Stainless all Valves 2-Piece Stainless Steel, ull Port 1/4 to 2 SRIS eatures Spring Return or ouble cting ctuators ull Port direct mount ISO5211 valve 316 stainless steel body, ball and stem
II DISTRIBUTION & SUBSTATION TYPE C
CapCheckIII DISTRIBUTION & SUBSTATION TYPE Ca p a c i t o r C h e c ke r Operating & Instruction Manual 1475 Lakeside Drive Waukegan, Illinois 60085 U.S.A. 847.473.4980 f a x 8 4 7. 4 7 3. 4 9 8 1 w e
HIGH VOLTAGE DIGITAL AMMETER
HIGH VOLTAGE DIGITAL AMMETER Operating & Instruction Manual HVA-2000 Making the Invisible Visible TM 1475 Lakeside Drive Waukegan, Illinois 60085 U.S.A. 847.473.4980 f a x 8 4 7. 4 7 3. 4 9 8 1 w e b s
Model 58-93R Tubing Power Tong Installation, Operation, Service and Parts Book Manual
Model 58-93R Tubing Power Tong Installation, Operation, Service and Parts Book Manual WPI WELLKIN Inc. 8401 Industrial Dr. Pearland, TX 77584 PH: (281) 992-2064 FX: (281) 992-2076 E-mail: sales@wpiwellkin.com
Model FM2642 Wall Mount. Full Motion Television Wall Mount
Model FM2642 Wall Mount Full Motion Television Wall Mount Getting Started Introduction Congratulations on the purchase of your new Audio Solutions FM2642 Television Wall Mount. For maximum benefit, please
Nor East. Instructions Safety Messages. Inspection. Parts. DeZURIK Service. Type 05 Pneumatic Actuator Used With Globe Valves
Instructions Safety Messages These instructions are intended for personnel who are responsible for installation, operation and maintenance of your DeZURIK Actuator. All safety messages in the instructions
6A-1773 Q ISO-2944
6A-1773 Q1-2801 ISO-2944 Lowery Well Heads, Inc. Quality is #1 We are happy to announce that as of 9-11-15 we are now API Q1 and ISO 9001 certified. Lowery Well Heads, Inc. is committed to its customer
CYLINDERS SINGLE ACTING TELESCOPIC CYLINDERS
CYLINDERS SINGLE ACTING TELESCOPIC CYLINDERS Double Lip Wipers Double Lip Seal Solid Stop Sliders for Bearing Stability for Top and Bottom Chromed Final Stage Grease Zerk Standard CONSTRUCTION ELEMENTS
PNEUMATIC RACK AND PINION ACTUATORS. Advanced torque to size ratio
PNUMTI RK N PINION TUTORS dvanced torque to size ratio eatures: Pneumatic Rack and Pinion ctuators 90 ctuation for -way valves (Straight & ngle) 180 ctuation for -way (T-type) valves ctuators comply with
Instruction Sheet. SFR Series. Swing Frame rack
Instruction Sheet SFR Series Swing Frame rack THANK YOU Thank you for purchasing the SFR Series Swing Frame Rack. Please read these instructions thoroughly before installing/assembling this product. PRODUCT
DeZURIK KUL KNIFE GATE VALVES
KUL KNIFE GATE VALVES Instruction D11025 September 2013 Instructions These instructions are intended for personnel who are responsible for the installation, operation and maintenance of your KUL knife
PORTABLE PLATFORM SCALES Digital Type Series 850F Owner s Manual
PORTABLE PLATFORM SCALES Digital Type Series 850F Owner s Manual Model 850F CARDINAL SCALE MFG. CO. 0066-M176-O1 Rev J 203 E. Daugherty, Webb City, MO 64870 USA 11/14 Ph: 417-673-4631 Fax: 417-673-5001
Evans SN Series. Evans. Sanitary & Vacuum Ball Valves
SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish The SN
A Member of the. Integrated Metering Technologies
I n s t a l l a t i o n M a n u a l A Member of the Integrated Metering Technologies 1.0 General and Safety Do not install, operate or maintain this flow meter without reading, understanding and followingthe
33/43/53. Series. 3, 4, 5-Way Direct Mount Multi-Port Ball Valves 1/4" - 4" SERIES 33/43/53 Multi-Port
SERIES 33/43/53 Multi-Port Series 33/43/53 3, 4, 5-Way Direct Mount Multi-Port Ball Valves 1/4" - 4" 9955 International Blvd. Cincinnati, Ohio 45246 www.atcontrols.com PHONE (513) 247-5465 FAX (513) 247-5462