Programme overview Group 5

Transcription

1 Programme overview Group Electromechanical opening system easys for InnoTech Double walled drawer system InnoTech i Range summary Single-wall steel drawer system MultiTech i Range summary Partial and full-extension runners for wooden drawers i Range summary Drawer runners for special applications i i Range summary General information on drawer systems and drawer runners Table extension slides i Range summary Programme overview Group

2 Electromechanical opening system easys for InnoTech Opens drawers as if by magic No problem with easys. No handles, no need to exert force in order to open the pull-outs and certainly no need to bend down. Instead, lots of freedom for both hands. And an outstandingly attractive kitchen design. Which proves that less is indeed more Electromechanical opening system easys

3 Electromechanical opening system easys for InnoTech With easys, pull-out elements open almost by magic. Gently push or pull any point on the drawer front and the drawer opens gently and noiselessly. If the drawer cannot be opened by hand, because both hands are occupied, wet or dirty, simply tap the drawer front with your knee, foot or hip to open it. An electromechanical drive unit ensures that the drawer opens smoothly. Since drive unit and drawer are not coupled to one another, the freely moving drawer can be stopped at any point. Electromechanical opening system easys 5.1.1

4 Electromechanical opening system easys for InnoTech easys requires no more than a very short opening stroke. Large reveals are therefore unnecessary between drawer front and cabinet, thus permitting the use of sealing lips. The drawer closes without electromechanical assistance. As usual, the smooth gliding action of the proven Quadro runner technology in combination with dampened closure Silent System ensures that the pull-out closes gently and noiselessly. The drawer can also be opened conventionally should a power outage occur Electromechanical opening system easys

5 Electromechanical opening system easys for InnoTech easys adds flair to the design options for a perfect kitchen. User convenience is doubled by the combination with handles or decorative profiles. The customer can choose between gently pulling or pressing to open the pull-out. easys also increases the value of a kitchen even as a standalone system. Automatic opening is simply ideal for selected applications, such as particularly large pot-and-pan drawers or drawers for separate collection of waste. The ergonomic aspect additionally comes to bear in the case of plinth drawers and the bottom row of drawers. Comfort can be so easy. Electromechanical opening system easys 5.1.3

6 Electromechanical opening system easys for InnoTech System components easys can be included in the planning without difficulty. For the system is compactly and slimly concealed behind the rear panel of the drawer. The planned storage space in the drawer or pot-and-pan drawer is retained without restriction. easys is suitable for all widths and depths. Two drive units ensure that large, heavy drawers exeeding 40 kg or wider than 900 mm move easily inside cabinets. The electromechanical opening system easys comprises the following system parts: Drive unit for drawers and pot-and-pan drawers Mounting profile set Mounting set Distribution block Extension lead Power supply unit Mains power cable Power supply unit holder Stop damper for front panel Minimum inside cabinet depth for: InnoTech drawer/pot-and-pan drawer with steel back panel: Nominal length + 30 mm InnoTech drawer/pot-and-pan drawer with wooden back panel: Nominal length + 45 mm Electromechanical opening system easys

7 Electromechanical opening system easys for InnoTech System components! Drive unit For opening the drawer/pot-and-pan drawer Toolless assembly on mounting profiles with automatic power supply Driving force can be adjusted in several stages Two drive units are preferably used per drawer/pot-and-pan drawer for parallel opening in cabinets with a width of more than 900 mm or with drawers weighing more than 40 kg (synchronization can be set on the drive unit) For use in the following countries: Belgium, Bulgaria, Denmark, Germany, Estonia, Finland, France, Greece, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Austria, Poland, Portugal, Romania, Sweden, Switzerland, Slovakia, Slovenia, Spain, Czech Republic, Hungary, United Kingdom, Cyprus other countries on request Order no. PU ! Mounting profile set For up to 6 drive units Can be shortened as required Aluminium Set contains: 1 pcs mounting profile with integrated power and data cables 1 pcs mounting profile without cables Length mm Order no. PU set set Mounting set For securing the mounting profiles to the top and bottom of the cabinet Set contains: 1 pcs mounting profile retainer, bottom, complete with power feeder and 800 mm connecting cable 1 pcs mounting profile, top Order no. PU set! Electromechanical opening system easys 5.1.5

8 Electromechanical opening system easys for InnoTech System components! Mounting bracket Used instead of the mounting profiles for special installation situations For one drive unit With 800 mm connecting cable Order no. PU Distribution block One distribution block is required per cabinet! Order no. PU Extension lead For connecting from one distribution block to the next Length 1500 mm! Order no. PU ! Power supply unit V, Hz For operation of up to max. 6 cabinets Safety class mm secondary cable to the first distribution block Mains power cable needs to be ordered separately Order no. PU Electromechanical opening system easys

9 Electromechanical opening system easys for InnoTech System components Mains power cable Length 1800 mm! Mains power cable Order no. PU Euro Connector UK plug connector type G ! Power supply unit holder For mounting on the wall or bottom of the cabinet Order no. PU Stop damper for front panel Ensures the required activating travel 4 pcs needs to be mounted per drawer for front panel heights of more than 300 mm! Assembly Order no. PU for drilling into the drawer front for drilling into the cabinet side ! External sensor For reliable activation with very high drawer fronts Order no. PU Electromechanical opening system easys 5.1.7

10 Range summary 5.2 Double walled drawer system InnoTech i InnoTech surprisingly versatile Planning a kitchen with Intelligent Kitchens Double walled drawer system InnoTech

11 i Range summary 5.2 Double walled drawer system InnoTech Ordering made easy InnoTech Quickfinder InnoTech Range summary Double walled drawer system InnoTech 5.2.1

12 Double walled drawer system InnoTech Drawer silver steel anthracite steel stainless steel brushed solid beech Drawers/pot-and-pan drawers define the character and quality looks of a kitchen in a particular way. Surprise your clients with something they won't be expecting! The InnoTech drawer system adds visual and practical highlights behind cabinet fronts. Higher and higher: InnoTech has the right answer to any storage situation. Four standard configurations provide tremendous flexibility when it comes to optimising the use of space. These are available: Drawer profiles in a height of 54 mm Drawer profiles in a height of 70 mm Pot-and-pan drawers in a height of 144 mm and Pot-and-pan drawers in a height of 176 mm Drawer runner Quadro drawer runners with Silent System close drawers and pot-and-pan drawers gently and quietly. Silent System perfectly controlled closure! Double walled drawer system InnoTech

13 Double walled drawer system InnoTech in steel, silver in plastic with glass without TopSide The many different components can easily be combined to create attractive, fascinating and unique compositions. InnoTech lets you present ideas that bear fruit in everyday kitchen use. Innovations Design freedom InnoTech offers a range of depths that's nothing short of impressive! Available in seven standard depths of 260 to 620 mm, InnoTech caters to any application. Versatile organiser systems give you flexibility in tailoring drawer space to suit your needs. OrgaWing OrgaFlex drawer for sink units XL plinth drawer Double walled drawer system InnoTech 5.2.3

14 Double walled drawer system InnoTech InnoTech in the bathroom The different material types and surface finishes of InnoTech drawer profiles provide an impressive choice of options, not only in the kitchen. High-quality bathrooms benefit in just the same way from the advantages of the InnoTech system and guarantee huge potential when it comes to standing apart behind the furniture front Double walled drawer system InnoTech

15 Double walled drawer system InnoTech Creating dream bathrooms the InnoTech range also provides a wealth of different options for realising refreshing design ideas in the bathroom and combining them with plenty of convenience and clever organisation. Double walled drawer system InnoTech 5.2.5

16 Intelligent Kitchens Intelligent Kitchens

17 Intelligent Kitchens making kitchens a joy! Recipes for added convenience in the kitchen Why should a kitchen be intelligent? Because only a cleverly planned kitchen is a really good kitchen. Because there's plenty a perfectly organised kitchen can do: greatly reduce the time and effort involved in cooking, optimise the use of storage space, cut physical strain and a whole lot more. Intelligent Kitchens from Hettich shows how it's done. Intelligent Kitchens 5.2.7

18 Intelligent Kitchens Intelligent Kitchens works in every kitchen! Intelligent Kitchens makes every kitchen an intelligent kitchen. Pots and pans Cleaning and waste Food preparation China and cutlery What does it look like in your kitchen cupboards? Well organised and tidy, of course. Intelligent Kitchens brings organisation to your kitchen. Because perfectly organised, half the cooking's already done. Keeping the important things exactly where they are needed makes light work of jobs in the kitchen. Intelligent Kitchens logically organises a kitchen into five theme-based activity areas Intelligent Kitchens

19 Intelligent Kitchens Planning a kitchen with Intelligent Kitchens We will show you how to apply Intelligent Kitchens on the basis of different kitchen layouts. This way, you will know from the outset how every kitchen unit and drawer can be fitted out to create effective furniture for each activity zone. Single-galley kitchen Double-galley kitchen L-shaped kitchen U-shaped kitchen Food storage G-shaped kitchen Island kitchen Intelligent Kitchens provably ensures efficient, non-crossing workflows and short walking distances. Putting you in control of cooking in record time logically arranged, well organised and in easy reach. Intelligent Kitchens more time to enjoy. Intelligent Kitchens 5.2.9

20 Intelligent Kitchens Food storage The ideal place for provisions: Out of the way yet always to hand. InnoTech drawers/pot-and-pan drawers, range summary, page InnoTech Pantry unit, page Dispensa Pantry unit, page Arena CLASSIC drawers, see page Many items stored away, yet with everything in view and easily reached: Storage and pantry units with convenient pull-outs. Organised and clearly in view right to the very back: Fully extending pull-out elements or drawers with versatile internal organisers. InnoTech storage unit, page Intelligent Kitchens

21 Intelligent Kitchens Food preparation Always in reach when preparing meals: Food and cooking utensils are ideally stored near the cooker or below the hob. Front pull-outs for unit width of 150 mm, see page All utensils neatly stored away and in easy reach: Thanks to perfect organisation in the midway section too. Ideal for everything you need for cooking: Flexible compartments and pull-outs near the hob. Cosario, page OrgaTray Basic, see page OrgaTray DeLuxe, see page Intelligent Kitchens

22 Intelligent Kitchens Pots and pans Ergonomic, convenient storage: superior solutions for pots and pans. OrgaFlag, page Pot-and-pan-drawers perfectly organised: Keeping saucepans and lids in place. Corner units fully under control with LeMans the curvaceous star among corner-unit fittings. LeMans, page Cleaning and waste Next to and under the sink: space that's a shame to leave unused. Special under-sink pull-outs utilise spaces otherwise wasted and keep cleaning products quick to hand. Waste sorting systems, see page OrgaFlex, see page Intelligent Kitchens

23 Intelligent Kitchens China and cutlery How to store stacks of china and cutlery. Convenient, variable, stable, strong: drawers with high-level sides give even heavy stacks of plates the hold they need. Space that adapts to the items it holds: drawers with variable cutlery trays create space for a wide range of cutlery and utensils. Dish drainer system, page OrgaStore Exclusiv, page OrgaTray Premium, see page OrgaTray Exclusiv, see page Intelligent Kitchens

24 Double walled drawer system InnoTech for variable drawer widths Quickfinder Description Nominal length Height 54 mm Height 70 mm mm powder-coated steel powder-coated steel stainless steel beech silver anthracite silver anthracite brushed lacquered InnoTech drawer profile system for variable drawer/ pot-and-pan drawer widths Front connectors With expanding dowel Screw-on Rear panel for cutting to size Corner clip for wooden rear panel Quadro drawer slides Nominal Quadro V6 Silent System Quadro V6 Stop Control length mm EB 12,5 EB 10,5 EB 9,5 EB 12,5 EB 10,5 EB 9,5 PU 1 set PU 10 sets PU 1 set PU 10 sets PU 1 set PU 10 sets PU 1 set PU sets PU 1 set PU sets PU 1 set PU sets Double walled drawer system InnoTech

25 Double walled drawer system InnoTech for variable drawer widths Quickfinder Height 144 mm Height 176 mm powder-coated steel stainless steel beech powder-coated steel stainless steel silver anthracite brushed lacquered silver anthracite brushed Nominal Quadro V6+ Silent System Quadro V8 Silent System Quadro 30 Stop Control length mm EB 12,5 EB 10,5 EB 9,5 EB 12,5 EB 10,5/9,5 EB 12,5 EB 10,5 EB 9,5 PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 1 set PU 19 sets PU 19 sets PU 19 sets Double walled drawer system InnoTech

26 Double walled drawer system InnoTech for variable internal drawer widths Quickfinder Description Nominal length Internal drawer Basic, Internal drawer Exclusiv, mm height 70 mm height 70 mm powder-coated steel powder-coated steel stainless steel beech silver silver anthracite brushed lacquered InnoTech drawer profile system for variable internal drawer/pot-and-pan drawer widths Rear panel for cutting to size Corner clip for wooden rear panel Description Cabinet width grey plastic/ satin glass mm aluminium silver anodised Front panels Customised cabinet widths Corner clip for drawer front Exclusiv, see below Description Corner clip for drawer front Exclusiv Finish aluminium finish stainless steel finish Quadro drawer slides Nominal Quadro V6 Silent System Quadro V6 Stop Control length mm EB 12,5 EB 10,5 EB 9,5 EB 12,5 EB 10,5 EB 9,5 PU 1 set PU 10 sets PU 1 set PU 10 sets PU 1 set PU 10 sets PU 1 set PU sets PU 1 set PU sets PU 1 set PU sets Double walled drawer system InnoTech

27 Double walled drawer system InnoTech for variable internal pot-and-pan drawer widths Quickfinder Internal drawer Basic, Internal drawer Exclusiv, height 144 mm height 144 mm powder-coated steel powder-coated steel stainless steel beech silver silver anthracite brushed lacquered grey plastic/ aluminium silver anodised satin glass Corner clip for drawer front Exclusiv, see below Nominal Quadro V6+ Silent System Quadro V8 Silent System Quadro 30 Stop Control length mm EB 12,5 EB 10,5 EB 9,5 EB 12,5 EB 10,5/9,5 EB 12,5 EB 10,5 EB 9,5 PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 1 set PU 19 sets PU 19 sets PU 19 sets Double walled drawer system InnoTech

28 Double walled drawer system InnoTech for standard cabinet widths Quickfinder Description Cabinet Preassembled drawer, Preassembled internal drawer Basic, Preassembled internal drawer Exclusiv, width height 70 mm height 70 mm height 70 mm mm Nominal length mm Nominal length mm Nominal length mm Preassembled drawer/ pot-and-pan drawer Front connectors With expanding dowel Screw-on Description Cabinet aluminium silver anodised/ satin glass width grey plastic mm Front panel Longitudinal railing for internal drawer Basic Corner clip for drawer front Exclusiv, aluminium finish Quadro drawer slides Nominal Quadro V6 Silent System Quadro V6 Stop Control length mm EB 12,5 EB 10,5 EB 9,5 EB 12,5 EB 10,5 EB 9,5 PU 1 set PU 10 sets PU 1 set PU 10 sets PU 1 set PU 10 sets PU 1 set PU sets PU 1 set PU sets PU 1 set PU sets Double walled drawer system InnoTech

29 Double walled drawer system InnoTech for standard cabinet widths Quickfinder Preassembled pot-and-pan drawer, Preassembled internal pot-and-pan drawer Preassembled internal pot-and-pan drawer height 144 mm Basic, height 144 mm Exclusiv, height 144 mm Nominal length mm Nominal length mm Nominal length mm aluminium silver anodised/ grey plastic satin glass Nominal Quadro V6+ Silent System Quadro V8 Silent System Quadro 30 Stop Control length mm EB 12,5 EB 10,5 EB 9,5 EB 12,5 EB 10,5/9,5 EB 12,5 EB 10,5 EB 9,5 PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 1 set PU 19 sets PU 19 sets PU 19 sets Double walled drawer system InnoTech

30 Range summary Double walled drawer system InnoTech i Material/Finish Powder-coated steel, silver Powder-coated steel, anthracite Stainless steel brushed Can be used as Drawer/pot-and-pan drawer Internal drawer/internal pot-and-pan drawer InnoTech Set pack Material/Finish Powder-coated steel, silver Can be used as Drawer/pot-and-pan drawer Internal drawer/internal pot-and-pan drawer InnoTech Preassembled drawers Material/Finish Powder-coated steel, silver Powder-coated steel, anthracite Can be used as Drawer/pot-and-pan drawer Internal drawer/internal pot-and-pan drawer InnoTech bulk packing Material/Finish Beech lacquered Can be used as Drawer/pot-and-pan drawer Internal drawer/internal pot-and-pan drawer InnoTech wood Double walled drawer system InnoTech

31 i Range summary Double walled drawer system InnoTech Push-To-Open InnoTech pantry/storage cabinet Mounting examples Quadro drawer slides/drawer opening system Push-To-Open Range summary Accessories side stabiliser, anti-tilt block, front stabiliser, front angle, drawer bottom panels, stop attachments InnoTech organisation for (internal) drawers and (internal) pot-and-pan drawers Range summary InnoTech drawers for undersink cabinets InnoTech preassembled electrical appliance drawer InnoTech preassembled XXL drawer InnoTech under-oven drawers InnoTech waste sorting systems Range summary Technical information see pages Double walled drawer system InnoTech

32 Double walled steel/stainless steel drawer system InnoTech for variable drawer widths Height 70 mm Quick insertion and removal of the drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech wooden drawer: Drawer set, height 70 mm + Front connectors with expanding dowel or to screw-on + Rear panel of aluminium or wood, mm + Quadro drawer slides see page Bottom panel, mm Drawer set, height 70 mm contains: 1 set drawer profiles, steel/stainless steel 1 set back panel connectors, steel 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm Nominal Order no. PU length mm powder-coated steel stainless steel silver anthracite brushed set set set set set set set Cover caps with customised imprint available on request Front connectors White plastic Assembly Order no. PU A With expanding dowel /40 B Screw-on /40 A B Fixing with countersunk chipboard screw ø 3,5 mm Aluminium back panel Custom length Length 2000 mm Pan-head screws ø 3,5 x 20 mm Powder-coated Finish Order no. PU silver anthracite Technical information see page Double walled drawer system InnoTech

33 Double walled steel/stainless steel drawer system InnoTech for variable drawer widths Height 70 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page ø4 ø6, , ø4 ø6, , ø4 ø6, , ø4 ø6,3 94 9, ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 2x ø10x12,5 A 2x ø10x12,5 A 2x ø10x12,5 A 2x ø10x12,5 40,5 4, , ,5 51,5 4, , ,5 KD EB KD EB KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 Dimension A ,5 10,5 9,5 Dimensions LT NL C Wooden rear panel Aluminium rear panel B LB LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel Aluminium rear panel A Bottom panel depth NL + 10 NL - 3 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 LB - 2 x EB - 63 D Rear panel height 65,5 A D 9 65, x ø3,5x12 ø3,5x20 Dimensions Order no. PU mm ø 3,5 x ø 3,5 x Processing technology see group 2 Double walled drawer system InnoTech

34 Double walled steel drawer system InnoTech for variable drawer widths Height 54 mm Quick insertion and removal of the drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech wooden drawer: Drawer set, height 54 mm + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see page Bottom and rear panel, mm Drawer set, height 54 mm contains: 1 set drawer profiles, powder-coated steel 1 set back panel connectors, powder-coated steel 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm Nominal length Order no. PU mm silver anthracite set Cover caps with customised imprint available on request Front connectors White plastic Assembly Order no. PU A With expanding dowel /40 B Screw-on /40 A B Fixing with countersunk chipboard screw ø 3,5 mm Technical information see page Double walled drawer system InnoTech

35 Double walled steel drawer system InnoTech for variable drawer widths Height 54 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page ø4 ø6,3 12 9,5 54 ø4 ø6, , ø4 ø6, , ø4 ø6, ,5 33 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 2x ø10x12,5 A 2x ø10x12,5 A 2x ø10x12,5 A 2x ø10x12,5 40,5 4, , ,5 32 4, ,5 32 4, ,5 KD EB KD EB KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 Dimension A ,5 10,5 9,5 Dimensions LT Wooden rear panel NL C LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel A Bottom panel depth NL + 10 B Bottom panel width LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 D Rear panel height 53 B LB A D x ø3,5x12 Dimensions Order no. PU mm ø 3,5 x ø 3,5 x Processing technology see group 2 Double walled drawer system InnoTech

36 Double walled steel/stainless steel drawer system InnoTech for variable pot-and-pan drawer widths Height 144 mm Quick insertion and removal of the pot-and-pan drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech pot-and-pan drawer: Pot-and-pan drawer set, height 144 mm + Front connectors with expanding dowel or to screw-on Rear panel of aluminium or wood, mm + Quadro drawer slides see page Bottom panel, mm Pot-and-pan drawer set, height 144 mm contains: 1 set drawer profiles, steel/stainless steel 1 set back panel connectors, steel 2 lengthwise railings, steel/stainless steel including front connectors 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm Nominal Order no. PU length mm powder-coated steel stainless steel silver anthracite brushed set set set set set set set Cover caps with customised imprint available on request Front connectors White plastic Assembly Order no. PU A With expanding dowel /40 B Screw-on /40 A B Fixing with countersunk chipboard screw ø 3,5 mm Aluminium back panel Custom length Length 2000 mm Pan-head screws ø 3,5 x 20 mm Powder-coated Finish Order no. PU silver anthracite Technical information see page Double walled drawer system InnoTech

37 Double walled steel/stainless steel drawer system InnoTech for variable pot-and-pan drawer widths Height 144 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page ø4 ø6,3 12 9, ø4 ø6,3 12 9, ø4 ø6,3 12 9, ø4 ø6,3 9, ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12, ,5 40, ,5 4, ,5 4, ,5 37, KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 KD EB KD EB By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 Dimension A ,5 10,5 9,5 Dimensions LT NL C Wooden rear panel Aluminium rear panel B LB LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel Aluminium rear panel A Bottom panel depth NL + 10 NL - 3 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 LB - 2 x EB - 63 D Rear panel height 144 Processing technology see group 2 A D 3x ø3,5x ø3,5x20 2x Dimensions Order no. PU mm ø 3,5 x ø 3,5 x Double walled drawer system InnoTech

38 Double walled steel/stainless steel drawer system InnoTech for variable pot-and-pan drawer widths Height 176 mm Quick insertion and removal of the pot-and-pan drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech pot-and-pan drawer: Pot-and-pan drawer set, height 176 mm + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see page Bottom and rear panel, mm Pot-and-pan drawer set, height 176 mm contains: 1 set drawer profiles, steel/stainless steel 1 set back panel connectors, steel 2 lengthwise railings, steel/stainless steel including front connectors 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm Nominal Order no. PU length mm powder-coated steel stainless steel silver anthracite brushed set set set set set set set Cover caps with customised imprint available on request Front connectors White plastic Assembly Order no. PU A With expanding dowel /40 B Screw-on /40 A B Fixing with countersunk chipboard screw ø 3,5 mm Technical information see page Double walled drawer system InnoTech

39 Double walled steel/stainless steel drawer system InnoTech for variable pot-and-pan drawer widths Height 176 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page ø4 ø6,3 12 9, ø4 ø6,3 12 9,5 176 ø4 ø6, , ø4 ø6,3 9, ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12, ,5 40, ,5 4, ,5 4, ,5 37, KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 KD EB KD EB By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 Dimension A ,5 10,5 9,5 Dimensions LT NL C Wooden rear panel LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel A Bottom panel depth NL + 10 B Bottom panel width LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 D Rear panel height 176 B LB Processing technology see group 2 A D 3x ø3,5x Dimensions Order no. PU mm ø 3,5 x ø 3,5 x Double walled drawer system InnoTech

40 Double walled steel drawer system InnoTech internal drawer Basic for variable cabinet widths, height 70 mm Quick insertion and removal of the internal drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech internal drawer: Drawer set, height 70 mm + Rear panel of aluminium or wood, mm + Aluminium drawer front Basic for standard cabinet widths or Corner clip for drawer front Basic and Aluminium drawer front Basic for cutting to length + Quadro drawer slides see page Bottom panel, mm Drawer set, height 70 mm contains: 1 set drawer profiles, powder-coated steel, silver 1 set back panel connectors, powder-coated steel, silver 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm Nominal length mm Order no. PU set set set set set Cover caps with customised imprint available on request Aluminium back panel Custom length Length 2000 mm Pan-head screws ø 3,5 x 20 mm Powder-coated silver Order no. PU Aluminium front panel Basic With premounted corner connectors For standard cabinet widths Anodised silver Technical information see page Cabinet width Order no. mm PU 1 PU Corner connector for drawer front Basic Grey plastic Order no. PU /10 sets Aluminium front panel Basic Custom length Length 2000 mm Anodised silver Order no. PU Double walled drawer system InnoTech

41 Double walled steel drawer system InnoTech internal drawer Basic for variable cabinet widths, height 70 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page min. 2 ø4x40 Interior panel min. 2 ø4x40 Interior panel min. 2 min. 2 ø4x40 Interior panel ø4x40 Interior panel ø4 ø6,3 12 9, ø4 ø6,3 12 9, ø4 ø6, , ø4 ø6,3 9,5 34,5 min ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 12,5 10,5 9,5 Usable interior depth Nominal length - 24 Distance rail For bridging the door/hinge protrusion White plastic Order no. PU Dimensions LT NL C Wooden rear panel Aluminium rear panel D ø3,5x20 E B LB A 9 65, LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel Aluminium rear panel A Bottom panel depth NL + 10 NL - 3 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 LB - 2 x EB - 63 D Rear panel height 65,5 E Aluminium front panel LB - 2 x EB - 71,5 LB - 2 x EB - 71,5 2x ø3,5x12 Dimensions Order no. PU mm ø 3,5 x ø 3,5 x Processing technology see group 2 Double walled drawer system InnoTech

42 Double walled steel/stainless steel drawer system InnoTech internal drawer Exclusiv for variable cabinet widths, height 70 mm Quick insertion and removal of the internal drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech internal drawer: Drawer set, height 70 mm + Rear panel of aluminium or wood, mm + Glass drawer front Exclusiv for standard cabinet widths or front panels individually produced by the installer (drawing see page ) + Corner connectors for glass drawer front Exclusiv + Quadro drawer slides see page Bottom panel, mm Drawer set, height 70 mm contains: 1 set drawer profiles, steel/stainless steel 1 set back panel connectors, steel 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm Nominal Order no. PU length mm powder-coated steel stainless steel silver anthracite brushed set set set set set set set Cover caps with customised imprint available on request Glass drawer front Exclusiv For standard cabinet widths Satin Cabinet width Order no. PU mm Corner connectors for glass drawer front Exclusiv Corner connector, lacquered zinc die-cast Profiled retainer, length 1042 mm, aluminium lacquered/anodized Front connectors and screws Finish Order no. PU aluminium finish stainless steel finish Aluminium rear panel Custom length Length 2000 mm Pan-head screws ø 3,5 x 20 mm Powder-coated Finish Order no. PU silver anthracite Technical information see page Double walled drawer system InnoTech

43 Double walled steel/stainless steel drawer system InnoTech internal drawer Exclusiv for variable cabinet widths, height 70 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page min. 2 Interior panel min. 2 Interior panel min. 2 Interior panel min. 2 ø4 ø6, , ø4 ø6, , ø4 ø6,3 12 9, ø4 ø6,3 34,5 min. 2 9,5 Interior panel 70 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 12,5 10,5 9,5 Drawer front for internal drawer Exclusiv Material thickness 4 mm R2 57 ø10 Distance rail For bridging the door/hinge protrusion White plastic ,5 14,5 LB - 2 x EB ,5 Order no. PU Dimensions Wooden rear panel Aluminium rear panel LT NL C F B LB A D 9 65, ø3,5x20 LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel Aluminium rear panel A Bottom panel depth NL + 10 NL - 3 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 LB - 2 x EB - 63 D Rear panel height 65,5 F Profiled retainer LB - 2 x EB LB - 2 x EB x ø3,5x12 Dimensions Order no. PU mm ø 3,5 x ø 3,5 x Processing technology see group 2 Double walled drawer system InnoTech

44 Double walled steel drawer system InnoTech internal pot-and-pan drawer Basic for variable cabinet widths, height 144 mm Quick insertion and removal of the internal pot-and-pan drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech internal pot-and-pan drawer: Internal pot-and-pan drawer set, height 144 mm + Rear panel of aluminium or wood, mm + Aluminium drawer front Basic for standard cabinet widths or Aluminium drawer front Basic for cutting to length and Corner connector for drawer front Basic and Crosswise railing, custom length + Quadro drawer slides see page Bottom panel, mm Internal pot-and-pan drawer set, height 144 mm contains: 1 set drawer profiles, powder-coated steel, silver 1 set back panel connectors, powder-coated steel, silver 2 lengthwise railings, powder-coated steel, silver 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm Nominal length mm Order no. PU set set set set set Cover caps with customised imprint available on request Aluminium front panel Basic With premounted corner connectors For standard cabinet widths Anodised silver Aluminium rear panel Custom length Length 2000 mm Pan-head screws ø 3,5 x 20 mm Powder-coated Aluminium front panel Basic Custom length Length 2000 mm Anodised silver Cabinet width Order no. mm PU 1 PU Technical information see page Order no. PU Corner connector for drawer front Basic Grey plastic Order no. PU /10 sets Order no. PU Crosswise railing Custom length Length 1140 mm Powder-coated steel, silver Order no. PU / Double walled drawer system InnoTech

45 Double walled steel drawer system InnoTech internal pot-and-pan drawer Basic for variable cabinet widths, height 144 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page ø4x40 ø4ø6, ,5 36 Crosswise railing Interior panel 144 ø4x40 ø4ø6, ,5 42 Crosswise railing Interior panel 144 ø4x40 ø4ø6, , Crosswise railing Interior panel 144 ø4x40 ø4ø6, ,5 34,5 Crosswise railing Interior panel 144 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 12,5 10,5 9,5 Usable interior depth Distance rail For bridging the door/hinge 50 Nominal length - 24 protrusion White plastic Order no. PU Dimensions LT NL C Wooden rear panel Aluminium rear panel G D LB = inside cabinet width NL = nominal length E LB LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel Aluminium rear panel A Bottom panel depth NL + 10 NL - 3 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 LB - 2 x EB - 63 D Rear panel height 144 E Aluminium front panel LB - 2 x EB - 71,5 LB - 2 x EB - 71,5 G Crosswise railing LB - 2 x EB - 2 LB - 2 x EB - 2 Processing technology see group 2 B A 3x ø3,5x ø3,5x20 2x Dimensions Order no. PU mm ø 3,5 x ø 3,5 x Double walled drawer system InnoTech

46 Double walled steel/stainless steel drawer system InnoTech internal pot-and-pan drawer Exclusiv for variable cabinet widths, height 144 mm Quick insertion and removal of the internal pot-and-pan drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm Pot-and-pan drawer set, height 144 mm contains: 1 set drawer profiles, steel/stainless steel 1 set back panel connectors, steel 2 lengthwise railings, steel/stainless steel including front connectors 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm The following components are all you need for assembling an InnoTech internal pot-and-pan drawer: Pot-and-pan drawer set, height 144 mm + Rear panel of aluminium or wood, mm + Glass drawer front Exclusiv for standard cabinet widths or front panels individually produced by the installer (drawing see page ) + Corner connectors for glass drawer front Exclusiv + Quadro drawer slides see page Bottom panel, mm Nominal Order no. PU length mm powder-coated steel stainless steel silver anthracite brushed set set set set set set set Cover caps with customised imprint available on request Glass drawer front Exclusiv For standard cabinet widths Satin Cabinet width Order no. PU mm Corner connectors for glass drawer front Exclusiv Corner connector, lacquered zinc die-cast Profiled retainer, length 1042 mm, aluminium lacquered/anodized Front connectors and screws Finish Order no. PU aluminium finish stainless steel finish Aluminium back panel Custom length Length 2000 mm Pan-head screws ø 3,5 x 20 mm Powder-coated Finish Order no. PU silver anthracite Technical information see page Double walled drawer system InnoTech

47 Double walled steel/stainless steel drawer system InnoTech internal pot-and-pan drawer Exclusiv for variable cabinet widths, height 144 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height min. 2 ø4 ø6,3 Interior panel min. 2 ø4 ø6,3 Interior panel min. 2 ø4 ø6,3 Interior panel min. 2 ø4 ø6,3 Interior panel For further details see page , , , ,5 34,5 min ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 12,5 10,5 9,5 Drawer front for internal pot-and-pan drawer Exclusiv Material thickness 4 mm ø Distance rail For bridging the door/hinge protrusion White plastic ,5 14,5 LB - 2 x EB ,5 Order no. PU Dimensions LT NL C Wooden rear panel Aluminium rear panel F B LB A D 3x ø3,5x ø3,5x20 2x! LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel Aluminium rear panel A Bottom panel depth NL + 10 NL - 3 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 LB - 2 x EB - 63 D Rear panel height 144 F Profiled retainer LB - 2 x EB LB - 2 x EB Processing technology see group 2 10 Dimensions Order no. PU mm ø 3,5 x ø 3,5 x Double walled drawer system InnoTech

48 Double walled steel drawer system InnoTech preassembled drawers for standard cabinet widths Double walled drawer system InnoTech

49 Double walled steel drawer system InnoTech preassembled drawers for standard cabinet widths As an alternative to variable-width profile systems, we offer preassembled, 3-sided drawers Nominal lengths 420, 470, 520 mm For cabinet width mm As drawer/internal drawer or As pot-and-pan drawer/internal pot-and-pan drawer With drawer profiles and rear panel, powder-coated steel, silver mm bottom panel, silver-grey InnoTech preassembled drawer InnoTech preassembled pot-and-pan drawer InnoTech internal drawer Basic InnoTech internal pot-and-pan drawer Basic InnoTech internal drawer Exclusiv InnoTech internal pot-and-pan drawer Exclusiv...this is the easy way to a finished drawer! Double walled drawer system InnoTech

50 Double walled steel drawer system InnoTech preassembled drawer for standard cabinet widths, height 70 mm Quick insertion and removal of the drawer Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech wooden drawer: Preassembled drawer, height 70 mm + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see page Preassembled drawer, height 70 mm contains: 1 pcs drawer, powder-coated steel, silver, 3-sided, preassembled, complete with silver-grey drawer bottom 2 pcs cover caps with Hettich logo Cabinet Nominal length mm PU width mm Cover caps with customised imprint available on request Front connectors White plastic Assembly Order no. PU A With expanding dowel /40 B Screw-on /40 A B Fixing with countersunk chipboard screw ø 3,5 mm Technical information see page Double walled drawer system InnoTech

51 Double walled steel drawer system InnoTech preassembled drawer for standard cabinet widths, height 70 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page ø4 ø6, , ø4 ø6, , ø4 ø6, , ø4 ø6,3 94 9, ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 2x ø10x12,5 A 2x ø10x12,5 A 2x ø10x12,5 A 2x ø10x12,5 40,5 4, , ,5 51,5 4, , ,5 KD EB KD EB KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 Dimension A ,5 10,5 9,5 Processing technology see group 2 Double walled drawer system InnoTech

52 Double walled steel drawer system InnoTech preassembled pot-and-pan drawer for standard cabinet widths, height 144 mm Quick insertion and removal of the pot-and-pan drawer Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech pot-and-pan drawer: 21 Preassembled pot-and-pan drawer, height 144 mm + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see pages Preassembled pot-and-pan drawer, height 144 mm contains: 1 pcs pot-and-pan drawer, powder-coated steel, silver, 3-sided, preassembled, complete with silver-grey drawer bottom 2 lengthwise railings including front connectors, powder-coated steel, silver 2 pcs cover caps with Hettich logo Cabinet width Nominal length mm PU mm Cover caps with customised imprint available on request Front connectors White plastic Assembly Order no. PU A B A B With expanding dowel /40 Screw-on /40 Fixing with countersunk chipboard screw ø 3,5 mm Technical information see page Double walled drawer system InnoTech

53 Double walled steel drawer system InnoTech preassembled pot-and-pan drawer for standard cabinet widths, height 144 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page ø4 ø6,3 12 9, ø4 ø6,3 12 9, ø4 ø6,3 12 9, ø4 ø6,3 9, ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12, ,5 40, ,5 4, ,5 4, ,5 37, KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 KD EB KD EB By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 Dimension A ,5 10,5 9,5 Processing technology see group 2 Double walled drawer system InnoTech

54 Double walled steel drawer system InnoTech preassembled internal drawer Basic for standard cabinet widths, height 70 mm Quick insertion and removal of the internal drawer Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech internal drawer: Preassembled drawer, height 70 mm + Aluminium drawer front Basic for standard cabinet widths + Quadro drawer slides see page Preassembled drawer, height 70 mm contains: 1 pcs drawer, powder-coated steel, silver, 3-sided, preassembled, complete with silver-grey drawer bottom 2 pcs cover caps with Hettich logo Cabinet width Nominal length mm PU mm Cover caps with customised imprint available on request Aluminium front panel Basic With premounted corner connectors, grey plastic For standard cabinet widths Anodised silver Cabinet width Order no. mm PU 1 PU Technical information see page Double walled drawer system InnoTech

55 Double walled steel drawer system InnoTech preassembled internal drawer Basic for standard cabinet widths, height 70 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page min. 2 ø4x40 Interior panel min. 2 ø4x40 Interior panel min. 2 ø4x40 Interior panel min. 2 ø4x40 Interior panel ø4 ø6,3 12 9, ø4 ø6,3 12 9, ø4 ø6, , ø4 ø6,3 9,5 34,5 min ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 12,5 10,5 9,5 Usable interior depth Distance rail For bridging the door/hinge Nominal length - 24 protrusion 50 White plastic Order no. PU Processing technology see group 2 Double walled drawer system InnoTech

56 Double walled steel drawer system InnoTech preassembled internal drawer Exclusiv For standard cabinet widths, height 70 mm Quick insertion and removal of the internal drawer Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm Preassembled drawer, height 70 mm contains: 1 pcs drawer, powder-coated steel, silver, 3-sided, preassembled, complete with silver-grey drawer bottom 2 pcs cover caps with Hettich logo The following components are all you need for assembling an InnoTech internal drawer: Preassembled drawer, height 70 mm + Glass drawer front Exclusiv for standard cabinet widths or front panels individually produced by the installer (drawing see page ) + Corner connectors for glass drawer front Exclusiv + Quadro drawer slides see page Cabinet width Nominal length mm PU mm Cover caps with customised imprint available on request Glass drawer front Exclusiv For standard cabinet widths Satin Cabinet width Order no. PU mm Corner connectors for glass drawer front Exclusiv Corner connector, zinc die-cast with aluminium finish Profiled retainer, length 1042 mm, aluminium silver anodised Front connectors and screws Order no. PU Technical information see page Double walled drawer system InnoTech

57 Double walled steel drawer system InnoTech preassembled internal drawer Exclusiv for standard cabinet widths, height 70 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page min. 2 ø4 ø6, ,5 36 Interior panel 70 min. 2 ø4 ø6, ,5 42 Interior panel 70 min ø4 ø6,3 12 9, Interior panel 70 min. 2 ø4 ø6, ,5 34,5 Interior panel 70 min. 2 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 12,5 10,5 9,5 Drawer front for internal drawer Exclusiv Material thickness 4 mm R2 57 ø10 Distance rail For bridging the door/hinge protrusion White plastic ,5 14,5 LB - 2 x EB ,5 Order no. PU Processing technology see group 2 Double walled drawer system InnoTech

58 Double walled steel drawer system InnoTech preassembled internal pot-and-pan drawer Basic for standard cabinet widths, height 144 mm Quick insertion and removal of the internal pot-and-pan drawer Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech internal pot-and-pan drawer: 21 Preassembled pot-and-pan drawer, height 144 mm + Aluminium drawer front Basic for standard cabinet widths + 22 Lengthwise railings for preassembled internal drawer + Quadro drawer slides see page Preassembled pot-and-pan drawer, height 144 mm contains: 1 pcs pot-and-pan drawer, powder-coated steel, silver, 3-sided, preassembled, complete with silver-grey drawer bottom 2 pcs cover caps with Hettich logo Cabinet Nominal length mm PU width mm Cover caps with customised imprint available on request Aluminium front panel Basic With premounted corner connectors, grey plastic For standard cabinet widths Anodised silver Cabinet width Order no. mm PU 1 PU Technical information see page Lengthwise railings for preassembled internal pot-and-pan drawer Powder-coated steel, silver The longitudinal railing supplied with the preassembled front drawer must not be used Nominal length mm Order no. PU Double walled drawer system InnoTech

59 Double walled steel drawer system InnoTech preassembled internal pot-and-pan drawer Basic for standard cabinet widths, height 144 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page Crosswise Crosswise Crosswise min. 2 railing min. 2 railing min. 2 railing min. 2 ø4x40 ø4ø6, ,5 36 Interior panel ø4ø6, ø4x ,5 42 Interior panel ø4x , ø4ø6,3 Interior panel ø4ø6, ø4x40 9,5 34,5 min. 2 Crosswise railing Interior panel 144 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 12,5 10,5 9,5 Usable interior depth Distance rail For bridging the door/hinge 50 Nominal length - 24 protrusion White plastic Order no. PU Processing technology see group 2 Double walled drawer system InnoTech

60 Double walled steel drawer system InnoTech preassembled internal pot-and-pan drawer Exclusiv for standard cabinet widths, height 144 mm Quick insertion and removal of the internal pot-and-pan drawer Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm 21 Preassembled pot-and-pan drawer, height 144 mm contains: 1 pcs pot-and-pan drawer, powder-coated steel, silver, 3-sided, preassembled, complete with silver-grey drawer bottom 2 pcs cover caps with Hettich logo The following components are all you need for assembling an InnoTech internal drawer: 21 Preassembled pot-and-pan drawer, height 144 mm + Glass drawer front Exclusiv for standard cabinet widths or front panels individually produced by the installer (drawing see page ) + Corner clips for glass drawer front Exclusiv + Quadro drawer slides see page Cabinet Nominal length mm PU width mm Cover caps with customised imprint available on request Glass drawer front Exclusiv For standard cabinet widths Satin Cabinet width Order no. PU mm Technical information see page Corner connectors for drawer front Exclusiv Corner connector, zinc die-cast with aluminium finish Profiled retainer, length 1042 mm, aluminium silver anodised Front connectors and screws Order no. PU Double walled drawer system InnoTech

61 Double walled steel drawer system InnoTech preassembled internal pot-and-pan drawer Exclusiv for standard cabinet widths, height 144 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height min. 2 ø4 ø6,3 Interior panel min. 2 ø4 ø6,3 Interior panel min. 2 ø4 ø6,3 Interior panel min. 2 ø4 ø6,3 Interior panel For further details see page , , , ,5 34,5 min ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 12,5 10,5 9,5 Drawer front for internal pot-and-pan drawer Exclusiv Material thickness 4 mm ø Distance rail For bridging the door/hinge protrusion White plastic ,5 14,5 LB - 2 x EB ,5 Order no. PU Processing technology see group 2 Double walled drawer system InnoTech

62 Double walled steel drawer system InnoTech bulk packaging System components An InnoTech drawer comprises the following components: InnoTech drawer profile, left and right Steel rear panel for drawers in standard cabinet widths (rear panel connectors are not required when using steel rear panels!) Rear panel connectors for drawers, left and right (when using wooden rear panels) Cover caps for drawer profile, 2 pcs Drawer front connectors, 2 pcs Drawer slides Quadro for InnoTech, see page An InnoTech internal drawer Basic comprises the following components: InnoTech drawer profile, left and right Steel rear panel for drawers in standard cabinet widths (rear panel connectors are not required when using steel rear panels!) Rear panel connectors for drawers, left and right (when using wooden rear panels) Cover caps for drawer profile, 2 pcs Aluminium front panel Basic, height 70 mm Drawer slides Quadro for InnoTech, see page Double walled drawer system InnoTech

63 Double walled steel drawer system InnoTech bulk packaging System components An InnoTech pot-and-pan drawer comprises the following components: InnoTech drawer profile, left and right / Steel rear panel for pot-and-pan drawers in standard cabinet widths (rear panel connectors are not required when using steel rear panels!) Rear panel connectors for front panels, left and right (when using wooden rear panels) Cover caps for drawer profile, 2 pcs Drawer front connectors, 2 pcs Lengthwise railings for pot-and-pan drawer, 2 pcs Drawer slides Quadro for InnoTech, see page / / An InnoTech internal pot-and-pan drawer Basic comprises the following components: InnoTech drawer profile, left and right Steel rear panel for pot-and-pan drawers in standard cabinet widths (rear panel connectors are not required when using steel rear panels!) Rear panel connectors for front panels, left and right (when using wooden rear panels) Cover caps for drawer profile, 2 pcs Aluminium front panel Basic, height 144 mm Lengthwise railings for internal drawer Basic Drawer slides Quadro for InnoTech, see page Double walled drawer system InnoTech

64 Double walled steel drawer system InnoTech bulk packaging System components InnoTech drawer Powder-coated steel Rear panel for drawer, height 70 mm Powder-coated steel Nominal Finish Order no. PU length mm left right 260 silver silver silver silver silver silver silver anthracite anthracite anthracite anthracite anthracite anthracite anthracite Rear panel for pot-and-pan drawer, height 144 mm Powder-coated steel Cabinet width Finish PU mm silver anthracite Rear panel connector for wooden/aluminium rear panels Powder-coated steel Type Finish left right PU Drawer silver height 70 mm anthracite Pot-and-pan drawer silver height 144 mm anthracite Pot-and-pan drawer silver height 176 mm anthracite Cabinet width Finish PU mm silver anthracite Rear panel for pot-and-pan drawer, height 176 mm Powder-coated steel Cabinet width Finish PU mm silver anthracite Cover cap Plastic Finish Order no. PU grey grey with Hettich logo dark grey dark grey with Hettich logo chrome finish chrome finish with Hettich logo stainless steel finish stainless steel finish with Hettich logo Double walled drawer system InnoTech

65 Double walled steel drawer system InnoTech bulk packaging System components! Front connectors White plastic Assembly Order no. PU With expanding dowel Screw-on Front connector for lengthwise railing White plastic Assembly Order no. PU Screw-on Lengthwise railing for pot-and-pan drawer Complete with drawer front connection with expanding dowels Nominal powder-coated steel stainless steel PU length mm silver anthracite brushed TopSide for pot-and-pan drawer, height 144 mm Nominal powder- translucent length mm coated steel, plastic silver PU PU set sets sets sets sets sets set TopSide for pot-and-pan drawer, height 176 mm Translucent plastic Nominal length mm Order no. PU Design profile for gluing on Plastic Nominal Finish PU length mm chrome finish stainless steel finish Aluminium drawer front for internal drawer Basic Premounted corner connectors, grey plastic Anodised silver Cabinet width Order no. mm PU 1 PU Aluminium drawer front for internal pot-and-pan drawer Basic Premounted corner connectors, grey plastic Premounted crosswise railing, powder-coated steel, silver Anodised silver Cabinet width Order no. mm PU 1 PU Lengthwise railing for internal pot-and-pan drawer Basic Powder-coated steel, silver Nominal length mm Order no. PU Double walled drawer system InnoTech

66 Double walled wooden drawer system InnoTech for variable drawer widths/ standard cabinet widths Wooden kitchen organiser high quality, stylish and luxurious... The InnoTech wooden drawer/pot-and-pan drawer with the matching interior organisation lends a warm note to the kitchen. Available as a fixed cutlery tray in solid beech or a variable tray in wood/stainless steel, this is variable kitchen organisation in an attractive mix of materials Double walled drawer system InnoTech

67 Double walled wooden drawer system InnoTech for variable drawer widths/ standard cabinet widths The wooden drawer/pot-and-pan drawer offers a high quality alternative to the steel drawer/pot-and-pan drawer and includes all the advantages of the system, such as toolless panel height adjustment. Double walled drawer system InnoTech

68 Double walled wooden drawer system InnoTech for variable drawer widths/ standard cabinet widths, height 70 mm Quick insertion and removal of the drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm 23 Wooden drawer set, height 70 mm contains: 1 set drawer profiles, beech lacquered 2 pcs cover caps with Hettich logo Mounting material for rear panel Nominal length mm Order no. PU set set set set set set set Cover caps with customised imprint available on request The InnoTech wooden drawer can easily be assembled with the following components: 23 Wooden drawer set, height 70 mm + Front connectors with expanding dowel or to screw-on + 24 Wooden rear panel for standard cabinet widths or 25 Corner connectors for wooden rear panel and 26 Wooden rear panel for cutting to length, mm + Quadro drawer slides see page Bottom panel, mm Front connectors White plastic Assembly Order no. PU A With expanding dowel /40 B Screw-on /40 A B Fixing with countersunk chipboard screw ø 3,5 mm 24 Wooden rear panel for Cabinet width mm Order no. PU 25 Corner connectors for standard cabinet widths wooden rear panel Beech lacquered Beech lacquered Order no. PU set Wooden rear panel Custom length Length 1038 mm Beech lacquered Order no. PU Technical information see page Double walled drawer system InnoTech

69 Double walled wooden drawer system InnoTech for variable drawer widths/ standard cabinet widths, height 70 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page ø4 ø6, , ø4 ø6, ,5 42 ø4 ø6, , ø4 ø6,3 94 9, ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 2x ø10x12,5 A 2x ø10x12,5 A 2x ø10x12,5 A 2x ø10x12,5 4,5 40, , ,5 51,5 4, , ,5 KD EB KD EB KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 Dimension A ,5 10,5 9,5 Dimensions LT NL C Corner connectors for wooden rear panel Self-made wooden rear panel LB = inside cabinet width LB NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Corner connectors for Self-made wooden rear panel wooden rear panel A Bottom panel depth NL + 10 NL + 10 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB LB - 2 x EB - 25 D Rear panel height Processing technology see group 2 B A D 2x ø3,5x ø15x12, ø6x18 Dimensions Order no. PU mm ø 3,5 x ø 3,5 x Double walled drawer system InnoTech

70 Double walled wooden drawer system InnoTech for variable pot-and-pan drawer widths/ standard cabinet widths, height 148,5 mm Quick insertion and removal of the drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm 23 Wooden drawer set, height 70 mm contains: 1 set drawer profiles, beech lacquered 2 pcs cover caps with Hettich logo Mounting material for rear panel Nominal length mm Order no. PU set set set set set set set Cover caps with customised imprint available on request The following components are all you need for assembling an InnoTech wooden pot-and-pan drawer: 23 Wooden drawer set, height 70 mm + Front connectors with expanding dowel or to screw-on + 27 Longitudinal railing for wooden rear panel + 28 Wooden rear panel for standard cabinet widths or Corner clip for wooden rear panel and Wooden rear panel for cutting to length, mm + Quadro drawer slides see page Bottom panel, mm Front connectors White plastic Fixing with countersunk chipboard screw ø 3,5 mm Assembly Order no. PU A With expanding dowel /40 B Screw-on /40 27 Lengthwise railing for wooden rear panel 30 Wooden rear panel Stainless steel brushed Custom length Length 1038 mm Beech lacquered Nominal length Order no. PU mm set set set set set set A B 28 Wooden rear panel for standard cabinet widths Beech lacquered Cabinet width Order no. PU mm Corner connectors for wooden rear panel Order no. PU Beech lacquered set Order no. PU Technical information see page set Double walled drawer system InnoTech

71 Double walled wooden drawer system InnoTech for variable pot-and-pan drawer widths/ standard cabinet widths, height 148,5 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page ø4 ø6, , ,5 ø4 ø6,3 ø4 ø6,3 148, ,5 9, ,5 ø4 ø6, , ,5 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12, ,5 40, ,5 46, ,5 51, ,5 37, KDEB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 KD EB KDEB By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 Dimension A ,5 10,5 9,5 Dimensions LB LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used B Size Corner connector for Self-made wooden rear panel wooden rear panel A Bottom panel depth NL + 10 NL + 10 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB LB - 2 x EB - 25 D Rear panel height 148,5 148,5 LT NL A C D Corner connector for wooden rear panel 2x ø3,5x , x ø3,5x ,5 148,5 Self-made wooden rear panel 9 12,5 32 2x 148,5 ø3,5x12 Dimensions Order no. PU mm ø 3,5 x ø 3,5 x Processing technology see group 2 Double walled drawer system InnoTech

72 Double walled steel drawer system InnoTech pantry cabinet Mounting examples Flexible hardware system for individual cabinet heights and widths Drawers/pot-and-pan drawers and internal drawers/ internal pot-and-pan drawers which are partly connected to the furniture front ensure unimpeded access to the contents Easy to use: The user does not have to move the full weight of the stored item Drawers/pot-and-pan drawers and internal drawers/ internal pot-and-pan drawers can be individually organized High load capacity (depending on the Quadro drawer slides used) Optionally with dampened closure Silent System for gentle, noiseless closing action Ideal for retrofitting in larder cabinets and pantry cabinets Cabinet heights mm No. Article Quantity See catalogue page for variable for standard cabinet widths cabinet widths InnoTech drawer 1 pc Quadro V6 Silent System 1 set InnoTech front connectors 2 pcs InnoTech internal pot-and-pan drawer Basic or Exclusiv 1 pc Quadro V6 Silent System 1 set InnoTech front panel + accessories 1 pc InnoTech pot-and-pan drawer 1 pc Quadro V6 1 set InnoTech front connectors 2 pcs InnoTech internal pot-and-pan drawer Basic or Exclusiv 1 pc Quadro V6 Silent System 1 set InnoTech front panel + accessories 1 pc InnoTech pot-and-pan drawer 1 pc Quadro V8 Silent System 1 set InnoTech front connectors 2 pcs Interior equipment see page Double walled drawer system InnoTech

73 Double walled steel drawer system InnoTech pantry cabinet Mounting examples Cabinet heights mm No. Article Quantity See catalogue page for variable for standard cabinet widths cabinet widths InnoTech internal drawer Basic or Exclusiv 1 pc Quadro V6 Silent System 1 set InnoTech front panel + accessories 1 pc InnoTech pot-and-pan drawer 1 pc Quadro V6 1 set InnoTech front connectors 2 pcs InnoTech internal pot-and-pan drawer Basic or Exclusiv 1 pc Quadro V6 Silent System 1 set InnoTech front panel + accessories 1 pc InnoTech pot-and-pan drawer 1 pc Quadro V8 Silent System 1 set InnoTech front connectors 2 pcs Cabinet heights mm No. Article Quantity See catalogue page for variable for standard cabinet widths cabinet widths InnoTech drawer 1 pc Quadro V6 Silent System 1 set InnoTech front connectors 2 pcs InnoTech internal pot-and-pan drawer Basic or Exclusiv 1 pc Quadro V6 Silent System 1 set InnoTech Front panel + accessories 1 pc InnoTech pot-and-pan drawer 1 pc Quadro V6+ Silent System 1 set InnoTech front connectors 2 pcs Interior equipment see page Double walled drawer system InnoTech

74 InnoTech double-walled steel drawer system for storage cabinet Mounting example Flexible hardware system for individual cabinet heights and widths Optimum use of storage space Customised internal dividers ensure tidy, well-organised drawers High loading capacity of up to 70 kg per internal drawer/ internal pot-and-pan drawer (depending on the Quadro drawer runner used) Recommended cabinet widths mm, as from a cabinet width of 600 mm with 2 hinged doors Can be used with fast assembly Intermat 9956 concealed hinge, see pages min. 50 min. 50 Intermat 9956 see page Note: The door must be without any door protrusion! X X = depending on the internal drawer/internal pot-and-pan drawer or accessories used No. Article Quantity See catalogue page for variable for standard cabinet widths cabinet widths InnoTech internal drawer Basic or Exclusiv 1 pc Quadro V6+ Silent System 1 set InnoTech Front panel + accessories 1 pc InnoTech internal pot-and-pan drawer Basic or Exclusiv 1 pc Quadro V6+ Silent System 1 set InnoTech front panel + accessories 1 pc InnoTech internal pot-and-pan drawer Basic oder Exclusiv 1 pc Quadro V6+ Silent System 1 set InnoTech front panel + accessories 1 pc InnoTech internal pot-and-pan drawer Basic or Exclusiv 1 pc Quadro V6+ Silent System 1 set InnoTech front panel + accessories 1 pc Interior equipment see page Anti-tilt block see page Double walled drawer system InnoTech

75 i Range summary Quadro drawer slides for InnoTech drawer opening system P 2 O (Push-To-Open) Quadro V6 Silent System Full-extension with integrated soft-close function Load capacity 30 kg Quadro V6 Full-extension with integrated self-closing effect Load capacity 30 kg Quadro V6+ Silent System Full-extension with integrated soft-close function Load capacity 50 kg Quadro V8 Silent System Full-extension with integrated soft-close function Load capacity 70 kg Quadro 30 Partial-extension with integrated self-closing effect Load capacity 30 kg Drawer opening system P 2 O (Push-To-Open) for Quadro drawer slides with integrated self-closing function Push-To-Open Double walled drawer system InnoTech

76 Full-extension drawer slides for InnoTech Quadro V6 Silent System Load capacity 30 kg Slide-on assembly simply place the drawer on the slides and push home Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Flexibility through interchangeability swap between Quadro partial and full-extension slides without changing cabinet, drawer or front panel dimensions! Nominal Min. cabinet depth mm Hole Order no. Order no. Order no. length drawer/ intern. drawer/ spacing mm EB 12,5 EB 10,5 EB 9,5 mm p. & p. drawer p. & p. drawer b1 PU 1 set PU 10 sets PU 1 set PU 10 sets PU 1 set PU 10 sets Drawer/pot-and-pan drawer Cabinet front edge Nominal length Usable inside length Cabinet front edge ø4 ø6,3 Internal drawer/internal pot-and-pan drawer Cabinet front edge b1 Min. cabinet depth = minimum number of screw-fixing positions Usable inside length = nominal length -7,7 Internal drawer/internal pot-and-pan drawer Basic = nominal length - 24 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): ,5 10,5 9,5 Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 Dimension A Processing technology see group 2 Dimensions Order no. PU mm ø 6,3 x 10, ø 6,3 x ø 4,0 x Double walled drawer system InnoTech

77 Full-extension drawer slides for InnoTech Quadro V6 Load capacity 30 kg Slide-on assembly simply place the drawer on the slides and push home Stop Control the integrated self-closing mechanism closes drawers reliably and automatically and prevents them opening inadvertently Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Flexibility through interchangeability swap between Quadro partial and full-extension slides without changing cabinet, drawer or front panel dimensions! Can be combined with: P 2 O for Quadro see page Nominal Min. cabinet depth mm Hole Order no. Order no. Order no. length drawer/ intern. drawer/ spacing mm EB 12,5 EB 10,5 EB 9,5 mm p. & p. drawer p. & p. drawer b1 PU 1 set PU sets PU 1 set PU sets PU 1 set PU sets Drawer/pot-and-pan drawer Cabinet front edge Cabinet front edge Nominal length Usable inside length ø4 ø6,3 Internal drawer/internal pot-and-pan drawer Cabinet front edge b Min. cabinet depth = minimum number of screw-fixing positions Usable inside length = nominal length -7,7 Internal drawer/internal pot-and-pan drawer Basic = nominal length - 24 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): ,5 10,5 9,5 Carcase thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 Dimension A Processing technology see group 2 Dimensions Order no. PU mm ø 6,3 x 10, ø 6,3 x ø 4,0 x Double walled drawer system InnoTech

78 Full-extension drawer slides for InnoTech Quadro V6+ Silent System Load capacity 50 kg Slide-on assembly simply place the drawer on the slides and push home Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Nominal Min. cabinet depth mm Hole Order no. Order no. Order no. length drawer/ intern. drawer/ spacing mm EB 12,5 EB 10,5 EB 9,5 mm p. & p. drawer p. & p. drawer b1 b2 PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 8 sets Drawer/pot-and-pan drawer Cabinet front edge Nominal length Cabinet front edge ø4 ø6,3 Usable inside length Internal drawer/internal pot-and-pan drawer b1 b2 Min. cabinet depth = minimum number of screw-fixing positions Usable inside length = nominal length -7,7 Internal drawer/internal pot-and-pan drawer Basic = nominal length - 24 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): ,5 10,5 9,5 Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 Dimension A Processing technology see group 2 Dimensions Order no. PU mm ø 6,3 x 10, ø 6,3 x ø 4,0 x Double walled drawer system InnoTech

79 Full-extension drawer slides for InnoTech Quadro V8 Silent System Load capacity 70 kg Slide-on assembly simply place the drawer on the slides and push home Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Nominal length Min. cabinet depth mm Hole Order no. PU mm drawer/ intern. drawer/ spacing mm EB 12,5 EB 10,5/9,5 p. & p. drawer p. & p. drawer b1 b set set set Drawer/pot-and-pan drawer Cabinet front edge Nominal length Usable inside length Cabinet front edge ø4 ø6,3 Internal drawer/ internal pot-and-pan drawer b1 b Min. cabinet depth = minimum number of screw-fixing positions Usable inside length = nominal length -7,7 Internal drawer/internal pot-and-pan drawer Basic = nominal length - 24 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): ,5 10,5 9,5 Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 Dimension A Processing technology see group 2 Dimensions Order no. PU mm ø 6,3 x 10, ø 6,3 x ø 4,0 x Double walled drawer system InnoTech

80 Partial-extension drawer slides for InnoTech Quadro 30 Load capacity 30 kg Slide-on assembly simply place the drawer on the slides and push home Stop Control the integrated self-closing mechanism closes drawers reliably and automatically and prevents them opening inadvertently Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Flexibility through interchangeability swap between Quadro partial and full-extension slides without changing cabinet, drawer or front panel dimensions! Can be combined with: P 2 O for Quadro see page Nominal Min. cabinet depth mm Hole Extension Order no. PU length drawer/ intern. drawer/ spacing mm loss EB 12,5 EB 10,5 EB 9,5 mm p. & p. drawer p. & p. drawer b1 EL mm sets sets sets sets sets Drawer/pot-and-pan drawer Cabinet front edge Cabinet front edge Nominal length ø4 ø6,3 Usable inside length Internal drawer/ internal pot-and-pan drawer EL 37 b1 Min. cabinet depth = minimum number of screw-fixing positions Usable inside length = nominal length -7,7 Internal drawer/internal pot-and-pan drawer Basic = nominal length - 24 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): ,5 10,5 9,5 Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 Dimension A Processing technology see group 2 Dimensions Order no. PU mm ø 6,3 x 10, ø 6,3 x ø 4,0 x Double walled drawer system InnoTech

81 Push-To-Open Drawer opening system P 2 O (Push-To-Open) for Quadro drawer slides with integrated self-closing function For opening handleless InnoTech drawers/pot-and-pan drawers A nudge is all it takes to open the drawer/pot-and-pan drawer Used with Quadro V6 (see page ) or Quadro 30 (see page ) A trial mounting is recommended Set contains: P 2 O-mechanical Screw-on panel plate ø3 Order no. PU set 13 ø3 ø3 14,5 0-3 mm adjustable 42, , ,5 85 Mounting examples! Double walled drawer system InnoTech

82 Accessories for InnoTech drawer system Side stabilizer Recommended for drawers/pot-and-pan drawers in cabinets widths of 800 mm Can be used both for variable-widths as well as for pre-assembled drawers/pot-and-pan drawers and internal drawers/ internal pot-and-pan drawers Set contains: 2 racks, plastic 1 shaft for cutting to length to fit cabinet widths up to 1200 mm, aluminium 2 cogwheels, plastic 2 supports, plastic 2 rod bearings, plastic Article Order no. PU Side stabilizer set Drilling jig EB 12, Drilling jig EB 9,5/10, Nominal length + 33,5 EB 9,5/10,5 = inside cabinet width - 2 x EB - 37 EB 12,5 = inside cabinet width - 2 x EB - 33 Technical information see page Double walled drawer system InnoTech

83 Accessories for InnoTech drawer system Anti-tilt block for variable-width drawers/pot-and-pan drawers or internal drawers/pot-and-pan drawers Prevents several drawers/pot-and-pan drawers or internal drawers/internal pot-and-pan drawers from being opened at the same time Ideal anti-tilt protection on mobile pedestals or standalone elements Invisibly mounted behind the rear panel of the drawer/ pot-and-pan drawer or rear panel of the internal drawer/ pot-and-pan drawer Can only be used with Quadro drawer slides EB 12,5 Set for a maximum of 5 drawers/pot-and-pan drawers The InnoTech anti-tilt block can be assembled from the following components: + Anti-tilt block set + locking bar Stop Control/ Stop Control Plus see group 6 Set contains: 1 locking head (only required in conjunction with Stop Control Plus locking bar) 5 housings with pre-mounted glide 5 activators 5 activator holders Order no. PU set 26,4 40 min. 75 mm for upper drawers fitting space 20,6 ø5 for drawer/pot-and-pan drawer = nominal length + 14,5 for internal drawer/internal pot-and-pan drawer = nominal length + 23,5 7 12,5 46 min. inside cabinet depth for drawer/pot-and-pan drawer = nominal length + 56 for internal drawer/internal pot-and-pan drawer = nominal length + 65 Technical information see page Double walled drawer system InnoTech

84 Accessories for InnoTech drawer system Front stabiliser Front angle Front stabiliser VB 36 with ball pin For stabilising wide and/or high fronts Reinforces the connection between drawer/ pot-and-pan drawer bottom and front panel Height and side adjustment also possible with front stabiliser installed Set contains: 1 pc connecting fitting VB 36, nickel-plated zinc die-cast 1 pc ball pin Order no. PU set 9,5 +0, ,5 12,5 8 Front angle For stabilising wide and/or high fronts Reinforces the connection between drawer/ pot-and-pan drawer bottom and front panel For mounting below the drawer/pot-and-pan drawer bottom panel after adjusting the front Set contains: 1 pc front angle, chromated steel 3 pcs special screw ø 5 x 14 mm 1 pc pan-head screws ø 4,0 x 12 mm Order no. PU set , Double walled drawer system InnoTech

85 Accessories for InnoTech drawer system Drawer bottom panels Stop attachment Drawer bottom panels Can be used in conjunction with variable-width sets for drawers, pot-and-pan drawers, internal drawers and internal pot-and-pan drawers Can be tailored to individual bottom panel dimensions For nominal lengths 260/300/350/420/470/520/620 mm For cabinet widths right up to 1200 mm Chipboard mm Surfaces identical to InnoTech preassembled drawers/ pot-and-pan drawers Top side: silver-grey Under side: white For cabinet width Dimensions mm Order no. PU 600 mm and less 500 x mm and less 1100 x Stop attachment For 5 mm hole diameter Transparent plastic ø8 Order no. PU /1000 1,5 5,5 ø5 Stop attachment For 6 mm hole diameter Plastic 1,5 ø8 7 ø6 Finish Order no. PU white /1000 brown /1000 beige /1000 Stop attachment ø 8 mm, self-adhesive Transparent plastic Order no. PU Double walled drawer system InnoTech

86 Range summary InnoTech Organisation i InnoTech designer-style profile/ designer cover cap Cutting board OrgaTray Basic cutlery/spice tray knife/spice rack OrgaTray Professional cutlery tray OrgaTray Classic cutlery tray knife/spice rack OrgaTray Premium cutlery tray knife/spice rack OrgaTray Exclusiv cutlery/spice tray knife/spice rack OrgaTray Deluxe cutlery/spice tray InnoPlus cutlery tray Double walled drawer system InnoTech

87 i Range summary InnoTech Organisation OrgaWing TopSide for pot-and-pan/internal pot-and-pan drawers Railing systems OrgaFlag Crosswise railing/orgastore Basic OrgaStore Classic OrgaStore Professional OrgaStore Exclusiv OrgaStore Deluxe glass jar/storage container organisation rail organizer Double walled drawer system InnoTech

88 InnoTech drawer system organisation Designer-style profile/ designer-style cover cap Cutting board Designer-style profile and cover cap Simple, effective means of distinguishing InnoTech drawers Profiles are glued on afterwards Can also be used with TopSide, see pages Set contains: 2 design-style profiles, plastic 2 designer-style cover caps, plastic Nominal length Order no./finish PU mm chrome finish stainless steel finish set set set set set set set Cutting board Suitable for InnoTech drawers and pot-and-pan drawers Slides front to back Solid beech, oiled and steamed Cabinet width Order no. PU mm / Double walled drawer system InnoTech

89 InnoTech drawer system organisation Cutlery tray OrgaTray Basic 1 for drawers/internal drawers Universal application Easy to trim to size Knife and/or spice rack can be added, see page Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: silver For cabinet width Width Order no./depth mm PU mm mm Partitioning Depth Depth * * Width Depth Depth * * * * * * * * * * * Depth * * * * * * * * * * * Width * knife and spice rack can be incorporated, see page Double walled drawer system InnoTech

90 InnoTech drawer system organisation Tray OrgaTray Basic 2/OrgaTray Basic 3 for drawers/internal drawers Multi-purpose tray OrgaTray Basic 2 Universal application Easy to trim to size Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: silver For cabinet width Width Order no. PU mm mm Partitioning Depth Width Cutlery/spice tray OrgaTray Basic 3 Universal application Easy to trim to size Knife and/or spice rack can be added, see page Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: silver Partitioning Depth Width * * * For cabinet width Width Order no. PU mm mm * knife and spice rack can be incorporated, see page Trimmed width Cut sizes for trays OrgaTray Basic 1, 2 and 3 The wide rim can be trimmed to fit drawer size. Use a circular saw and calculate tray size using the following formulae: Trimmed width = inside cabinet width - 2 x EB - 31 When using fascia profiles = inside cabinet width - 2 x EB - 35 Trimmed depth For drawer/internal drawer Exclusiv = nominal length - 7,7 For internal drawer Basic = nominal length - 24 EB Inside cabinet width Double walled drawer system InnoTech

91 InnoTech drawer system organisation Cutlery tray OrgaTray Basic 4 for drawers/internal drawers Exclusiv Cutlery tray OrgaTray Basic 4 Designed for standard cabinet widths Knife and/or spice rack can be added, see below Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: silver Partitioning Nominal length Width Depth For cabinet width * * * * * Cabinet width Order no./nominal length mm PU mm * knife and spice rack can be incorporated, see below Accessories for OrgaTray Basic trays Knife/spice rack Beech lacquered Stainless steel containers Matches spice rack ø50 ø48 Article Order no. PU Salt-cellar Pepper-pot Article Order no. PU Knife holder (knives not included) Spice rack ø 53 mm, standing (spices not included) Spice rack, lying flat (spices not included) Duster, e.g. for icing sugar Coarse duster Fine duster With acrylic lid Spice shaker/mill Fascia profile with sealing lip For clipping on at the side Plastic Tray width needs to be reduced by 4 mm For nominal length Length Order no./finish PU mm mm chrome finish stainless steel finish Double walled drawer system InnoTech

92 InnoTech drawer system organisation Spice tray OrgaTray Basic 5 for drawers/internal drawers Anti-slip mat Spice tray OrgaTray Basic 5 Universal application Easy to trim to size Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: silver For cabinet width Width Order no. PU mm mm Trimmed width Partitioning 23 Depth Width EB Inside cabinet width Cut sizes for spice tray OrgaTray Basic 5 Trimmed width = inside cabinet width - 2 x EB - 46 When using fascia profiles = inside cabinet width - 2 x EB - 50 Trimmed depth = For drawer/internal drawer Exclusiv = nominal length - 7,7 For internal drawer Basic = nominal length - 24 Anti-slip mat 5 m roll Polystyrene rubber, nobbed Trimmed width = inside cabinet width - 2 x EB - 59 For nominal length Length Order no./finish PU mm mm silver transparent Double walled drawer system InnoTech

93 InnoTech drawer system organisation Cutlery tray OrgaTray Professional for drawers/internal drawers Exclusiv Designed for standard cabinet widths Organisation can be tailored to personal needs using the variable dividers set contains two dividers per compartment Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Height 60 mm Surface finish: silver Cabinet width Order no./nominal length mm PU mm set set set set set set set set set set set Additional dividers Length Order no. PU mm / /50 Partitioning Nominal length Depth Width For cabinet width Nominal length Depth Width For cabinet width Fascia profile with sealing lip For clipping on at the side Plastic Tray width needs to be reduced by 4 mm For nominal length Length Order no./finish PU mm mm chrome finish stainless steel finish Double walled drawer system InnoTech

94 InnoTech drawer system organisation Cutlery tray OrgaTray Classic 1 for drawers/internal drawers Universal application Easy to trim to size Dividers, knife and/or spice rack can be added, see page Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: silver For cabinet width Width Order no./depth mm PU mm mm Trimmed width Partitioning Depth ** ** Depth ** ** * * EB Inside cabinet width Depth Width ** * Trim sizes for cutlery tray OrgaTray Classic 1 The wide rim can be trimmed to fit drawer size. Use a circular saw and calculate tray size using the following formulae: Depth Depth ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** * * * * * * * * * * * * * * Trimmed width = inside cabinet width - 2 x EB - 28 When using fascia profiles Depth = inside cabinet width - 2 x EB - 32 Trimmed depth Width For drawer/internal drawer Exclusiv = nominal length - 7,7 For internal drawer Basic = nominal length - 24 * ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** * * * * * * * * * * * * * * knife and spice rack can be incorporated, see page dividers can be used, see page Double walled drawer system InnoTech

95 InnoTech drawer system organisation Cutlery tray OrgaTray Classic 2 for drawers/internal drawers Exclusiv Cutlery tray OrgaTray Classic 2 Designed for standard cabinet widths Dividers, knife and/or spice rack can be added, see below Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: silver Partitioning Nominal length Depth Cabinet width Order no./nominal length mm PU mm ** ** * * ** ** ** * * * Width ! For cabinet width * ** knife and spice rack can be incorporated, see below dividers can be used, see below Accessories for cutlery trays OrgaTray Classic Stainless steel containers Matches spice rack 60 Article Material Order no. PU Knife holder beech (knives not included) lacquered Spice rack, beech ø 53 mm lacquered (spices not included) Dividing element plastic /2 grey Article Order no. PU Salt-cellar Pepper-pot Duster, e.g. for icing sugar Coarse duster Fine duster With acrylic lid ø50 Fascia profile with sealing lip For clipping on at the side Plastic Tray width must be reduced by 4 mm For nominal length Length Order no./finish PU mm mm chrome finish stainless steel finish Double walled drawer system InnoTech

96 201 InnoTech drawer system organisation Cutlery tray OrgaTray Premium 1 for drawers/internal drawers Universal application Easy to trim to size Knife and/or spice rack can be added, see page Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: anthracite For cabinet width Width Order no./depth mm PU mm mm Trimmed width Partitioning Depth * Depth EB Inside cabinet width Trim sizes for cutlery tray OrgaTray Premium 1 The wide rim can be trimmed to fit drawer size. Use a circular saw and calculate tray size using the following formulae: Depth Width Depth Depth * * ** * ** ! Trimmed width = inside cabinet width - 2 x EB - 31 When using fascia profiles = inside cabinet width - 2 x EB - 35 Trimmed depth For drawer/internal drawer Exclusiv = nominal length - 7,7 For internal drawer Basic = nominal length - 24 * Depth Width * * * * * * * knife and spice rack can be incorporated, see page Double walled drawer system InnoTech

97 InnoTech drawer system organisation Cutlery tray OrgaTray Premium 2 for drawers/internal drawers Exclusiv Cutlery tray OrgaTray Premium 2 Designed for standard cabinet widths Knife and/or spice rack can be added, see below Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: anthracite Partitioning Nominal length * Depth Width For cabinet width * * knife and spice rack can be incorporated, see below Cabinet width Order no./nominal length mm PU mm Accessories for OrgaTray Premium trays Knife/spice rack Beech lacquered Stainless steel containers Matches spice rack 60 ø50 Article Order no. PU Knife holder type 1 (knives not included) Spice rack, ø 53 mm type 1 (spices not included) Knife holder type 2 (knives not included) Spice rack, ø 53 mm type 2 (spices not included) Article Order no. PU Salt-cellar Pepper-pot Duster, e.g. for icing sugar Coarse duster Fine duster With acrylic lid Fascia profile with sealing lip For clipping on at the side Plastic Tray width must be reduced by 4 mm For nominal length Length Order no./finish PU mm mm chrome finish stainless steel finish Double walled drawer system InnoTech

98 201 InnoTech drawer system organisation Cutlery tray OrgaTray Premium 1 for drawers/internal drawers Universal application Easy to trim to size Knife and/or spice rack can be added, see page Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface stainless steel finish For cabinet width Width Order no./depth mm PU mm mm Trimmed width Partitioning Depth * Depth EB Inside cabinet width Trim sizes for cutlery tray OrgaTray Premium 1 The wide rim can be trimmed to fit drawer size. Use a circular saw and calculate tray size using the following formulae: Depth Width Depth Depth * * ** * ** ! Trimmed width = inside cabinet width - 2 x EB - 31 When using fascia profiles = inside cabinet width - 2 x EB - 35 Trimmed depth For drawer/internal drawer Exclusiv = nominal length - 7,7 For internal drawer Basic = nominal length - 24 * Depth Width * * * * * * * knife and spice rack can be incorporated, see page Double walled drawer system InnoTech

99 InnoTech drawer system organisation Cutlery tray OrgaTray Premium 2 for drawers/internal drawers Exclusiv Cutlery tray OrgaTray Premium 2 Designed for standard cabinet widths Knife and/or spice rack can be added, see below Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface stainless steel finish Partitioning Nominal length * Depth Width For cabinet width * * knife and spice rack can be incorporated, see below Cabinet width Order no./nominal length mm PU mm Accessories for OrgaTray Premium trays Knife/spice rack Beech lacquered Stainless steel containers Matches spice rack 60 ø50 Article Order no. PU Knife holder type 1 (knives not included) Spice rack, ø 53 mm type 1 (spices not included) Knife holder type 2 (knives not included) Spice rack, ø 53 mm type 2 (spices not included) Article Order no. PU Salt-cellar Pepper-pot Duster, e.g. for icing sugar Coarse duster Fine duster With acrylic lid Fascia profile with sealing lip For clipping on at the side Plastic Tray width must be reduced by 4 mm For nominal length Length Order no./finish PU mm mm chrome finish stainless steel finish Double walled drawer system InnoTech

100 InnoTech drawer system organisation Use of OrgaTray Exclusiv 1/Exclusiv 2 for drawers/internal drawers Exclusiv Cutlery tray OrgaTray Exclusiv 1 Designed for standard cabinet widths Cabinet widths of up to 1200 mm can be organised by combining several cutlery/spice trays and universal boxes Can be extended by knife, spice or foil holder, see below Beech lacquered Partitioning Cabinet width Order no./nominal length mm PU mm Nominal length Depth Width For cabinet width Accessories for adding width Beech lacquered / Nominal length Depth / 7 Width Nominal width / /200 Article Nominal width Order no./nominal length mm PU mm Spice tray Universal tray Universal tray Spice tray OrgaTray Exclusiv 2 Cabinet widths of up to 1200 mm can be organised by combining several cutlery/spice trays and universal boxes Beech lacquered Nominal length Width For cabinet width Depth /412/ /500/600 Cabinet width Order no./nominal length mm PU mm Double walled drawer system InnoTech

101 InnoTech drawer system organisation Accessories for OrgaTray Exclusiv Combination examples When using a combination of several trays: Cabinet width 800 Cutlery tray 400 Universal tray 100 Spice tray 400 Cabinet width 1000 Cutlery tray 400 Spice tray 200 Cutlery tray 500 Cutlery tray 600 Universal tray 100 Spice tray 400 Cutlery tray 500 Universal tray 200 Spice tray 400 Cabinet width 1200 Cutlery tray 600 Universal tray 100 Cutlery tray 600 Cutlery tray 600 Universal tray 100 Spice tray 600 Accessories for fitting into cutlery tray OrgaTray Exclusiv 1/universal tray Beech lacquered/stainless steel Stainless steel containers Matches spice tray/rack Article Width Order no./ PU mm nominal length mm Knife holder Spice rack ø Roll holder ø50 Article Order no. PU Salt-cellar Pepper-pot Duster, e.g. for icing sugar Coarse duster Fine duster With acrylic lid Spice shaker/mill ø48 Double walled drawer system InnoTech

102 InnoTech drawer system organisation Cutlery tray OrgaTray Deluxe 1 for drawers/internal drawers Exclusiv Designed for standard cabinet widths With variable dividers for customised organisation Set contains: 6 stainless-steel profiles 2 side rails, beech lacquered Dividing elements, beech lacquered Cabinet width Number of Order no./nominal length mm PU mm dividing elements set set set set set set set set set Partitioning Nominal length Depth Width For cabinet width Nominal length Depth Width For cabinet width Double walled drawer system InnoTech

103 InnoTech drawer system organisation Spice tray OrgaTray Deluxe 2 for drawers/internal drawers Exclusiv Designed for standard cabinet widths With variable dividers for customised organisation Set contains: 4 stainless-steel profiles 2 side rails, beech lacquered 2 cross-rails, beech lacquered 2 spice racks, beech lacquered 2 longitudinal dividers, beech lacquered 10 spice jars, stainless steel Dividing elements, beech lacquered Cabinet width Number of Order no./nominal length mm PU mm dividing elements set set set set set set Partitioning Nominal length Depth Width For cabinet width ! Nominal length Depth Width For cabinet width Double walled drawer system InnoTech

104 InnoTech drawer system organisation Cutlery tray InnoPlus for drawers/internal drawers Exclusiv Designed for standard cabinet widths For nominal length 470 and 520 mm Elements simply push together Set including anti-slip mat, silver burled Environmentally friendly: made of 100% recyclable steel Powder-coated steel, silver Partitioning Cabinet width mm Order no. PU Nominal length 470 Depth 462 Width For cabinet width Nominal length 470 Depth 462 Width For cabinet width Assembly 50 Secured with 2 wooden strips* Nominal length 520 *InnoPlus can also be used in drawers with 520 mm nominal length, but then needs to be held in place by 2 wooden strips Double walled drawer system InnoTech

105 InnoTech drawer system organisation Pop-out compartments OrgaWing Provides InnoTech pot-and-pan drawers, 144 mm height, with an additional swing-out storage level above the railing. The moving compartments automatically swing out to the side when the pot-and-pan drawer is opened. They gently glide back to the home position on closing the drawer. Suitable for cabinet widths of 800 mm and over For nominal length 470 mm Set contains: 2 pop-out compartments, plastic silver 2 turning mechanisms, right/left 2 lateral guide rollers 2 support rollers 2 end stops Order no. PU set Minimum installation height 140 Position for screw-mounting side guiding roller Double walled drawer system InnoTech

106 InnoTech drawer system organisation TopSide for pot-and-pan drawers, height 144/176 mm and internal pot-and-pan drawers Exclusiv, height 144 mm Closes off the sides between railing and drawer profile Attractive design Easy to install Can be retrofitted Nominal length mm Height mm Order no./finish PU powder-coated translucent satin steel, silver plastic glass* set set set set set set set set set set set set set set * please order TopSide universal adapter separately TopSide universal adapter For using TopSide in satinised glass or materials of personal choice Plastic Set contains: 2 front pieces left/right 2 rear elements left/right Nominal length ,5 4 Finish Order no. PU grey set aluminium finish set stainless steel finish set Double walled drawer system InnoTech

107 InnoTech drawer system organisation TopSide for internal pot-and-pan drawers Basic, height 144 mm Anti-slip mat TopSide for internal pot-and-pan drawers Basic, height 144 mm Closes off the sides between railing and drawer profile Attractive design Easy to install Can be retrofitted Translucent plastic Nominal length mm Order no. PU set set set set set TopSide front for internal pot-and-pan drawers Basic, height 144 mm Closes off the front between aluminium profile and railing Attractive design Easy to install Can be retrofitted Translucent plastic Cabinet widths mm Order no. PU Anti-slip mat 5 m roll Polystyrene rubber, nobbed Trimmed width = inside cabinet width - 2 x EB - 59 Nominal length Length Order no./finish PU mm mm silver transparent Double walled drawer system InnoTech

108 InnoTech drawer system organisation Railing systems Add-on set, lengthwise railing The 70 mm height drawer set see page can be turned into a variable-width pot-and-pan drawer with wooden rear panel using the add-on lengthwise railing set Any rear panel height and number of railings can be selected to meet personal needs A Inside cabinet width - 2 x EB ,5 12,5 14 ø10x12, x ø3,5 X A X - 52,5 Set contains: 1 set lengthwise railing with adapter for wooden rear panel 2 front connectors for lengthwise railings, white plastic 2x ø3,5x12 KD EB Inside cabinet width EB KD Nominal length Order no./finish PU mm powder-coated steel, stainless steel silver brushed set set set Add-on set, 2nd railing level A 2nd railing level can be added quickly and easily to pot-and-pan drawers Crosswise railing must be ordered separately, see below Set contains: 1 set of corner posts, grey plastic 2 lengthwise railings, powder-coated steel, silver 2 front connectors for lengthwise railings, white plastic * 64 see pot-andpan drawer height 144 or height 176 mm A inside cabinet width 2 x EB 41 * Nominal length mm Order no. PU set set set set set set set KD EB Crosswise railing for 2nd railing level Length 1140 mm Order no. PU / Double walled drawer system InnoTech

109 InnoTech drawer system organisation Organiser system OrgaFlag for pot-and-pan drawers/internal pot-and-pan drawers Exclusiv OrgaFlag organiser system Designed for standard cabinet widths Additional OrgaFlag perforated profiles also permit the construction of other drawer widths in 50 mm intervals Silver-grey plastic Set contains: 2 fascia profiles left/right Perforated profiles OrgaFlags with pre-mounted threaded pin Cabinet width Number of Order no./nominal length mm PU mm OrgaFlags set set set set Additional OrgaFlag Silver-grey plastic Perforated profile for OrgaFlag Silver-grey plastic Order no. PU Nominal length mm Order no. PU Double walled drawer system InnoTech

110 InnoTech drawer system organisation Crosswise railing Organiser system OrgaStore Basic Crosswise railing For pot-and-pan and internal pot-and-pan drawers Custom length Length 1140 mm Powder-coated steel, silver Mount for crosswise railing Grey plastic * inside cabinet width 2 x EB 41 * Article Order no. PU Crosswise railing / 5 Mount for crosswise railing /40 Organiser system OrgaStore Basic For pot-and-pan drawers, 144 mm height/ internal pot-and-pan drawers Designed for standard cabinet widths Can also be used for customised drawer widths by shortening the crosswise railing Set contains: 1 crosswise railing, powder-coated steel, silver 2 mounts for crosswise railing, grey plastic Organisation elements, grey plastic *! For cabinet width Number of organisation Order no. PU mm elements set set set set set set inside cabinet width 2 x EB 41 * Additional organisation element Order no. PU set Double walled drawer system InnoTech

111 InnoTech drawer system organisation Organiser system OrgaStore Classic for (internal) pot-and-pan drawers, 144 mm height OrgaStore Classic organiser system Tailored to standard cabinet widths Can also be used for customised drawer widths by shortening the aluminium partition Set contains: 1 aluminium partition Organisation elements, grey plastic Support pieces, black plastic * inside cabinet width 2 x EB 238 * Cabinet width Number of Number of Order no. PU mm organisation support pieces elements set set set set set Additional organisation element Set contains: 1 organisation element with cap, grey plastic 1 support piece, black plastic Order no. PU set Double walled drawer system InnoTech

112 Organiser system OrgaStore Professional for pot-and-pan drawers, 144 mm height/ internal pot-and-pan drawers Exclusiv OrgaStore Professional organiser system Tailored to standard cabinet widths Can also be used for customised drawer widths by shortening the aluminium partition Set contains: 1 set glass holder, silver-grey plastic 1 set TopSide, powder-coated steel, silver 6 glass jars with blue lid 2 aluminium partitions Dividing elements, grey plastic Cabinet width Number of Order no./ PU mm dividing elements nominal length mm set set set set set Additional dividing element Grey plastic Order no. PU Glass jar with blue lid Set consists of 4 glasses Order no. PU set! Inside cabinet width - 2 x EB EB Inside cabinet width EB Double walled drawer system InnoTech

113 InnoTech drawer system organisation Perforated panel OrgaStore Exclusiv 1/Exclusiv 2 for pot-and-pan drawers/internal pot-and-pan drawers Perforated hardboard OrgaStore Exclusiv 1 Tailored to standard cabinet widths Multiplex beech, varnished Dividing rails need to be ordered separately, see below Cabinet width Order no./nominal length mm PU mm Perforated hardboard OrgaStore Exclusiv 2 For cutting to size Dimensions 1100 x 630 mm Multiplex beech, varnished Dividing rails need to be ordered separately, see below Order no. PU Trimmed width Trimmed width = inside cabinet width - 2 x EB - 48 Trimmed depth = For pot-and-pan drawer/internal pot-and-pan drawer Exclusiv = nominal length - 7,7 For internal pot-and-pan drawer Basic = nominal length - 24 Dividing rail for perforated panel OrgaStore Exclusiv With pre-mounted dowel Beech lacquered Order no. PU / /12 Double walled drawer system InnoTech

114 InnoTech drawer system organisation Organiser system OrgaStore Deluxe 1 for pot-and-pan drawers/internal pot-and-pan drawers Exclusiv Organiser system OrgaStore Deluxe 1 Tailored to standard cabinet widths With variable dividers for customised organisation Set contains: 4 stainless steel profiles 2 cross-rails, beech lacquered 2 longitudinal dividers, beech lacquered 2 side rails, beech lacquered Dividing elements, beech lacquered Divider for organising glass jars/ storage containers, beech lacquered Cabinet width Number of Number of dividers for organising Order no./nominal length mm PU mm dividing elements glass jars/storage containers set set set set set Partitioning Nominal length Depth Width For cabinet width Nominal length Depth Width For cabinet width Storage container with lid For use in organiser system OrgaStore Deluxe 1 Stainless steel with acrylic lid 0 Order no. PU ø Double walled drawer system InnoTech

115 Organiser system OrgaStore Deluxe 2/3 for pot-and-pan drawers/ internal pot-and-pan drawers Exclusiv Tailored to standard cabinet widths With variable dividers for customised organisation Set contains: 2 side rails, beech 2 dividers, beech 3 railings for dividers, stainless steel Organiser system OrgaStore Deluxe 2 for pot-and-pan drawers, 144 mm height/internal pot-and-pan drawers Exclusiv Cabinet width Order no./nominal length mm PU mm set set set set set set set set set Additional divider for OrgaStore Deluxe 2 Beech lacquered Order no. PU Organiser system OrgaStore Deluxe 3 for pot-and-pan drawers, height 176 mm Cabinet width Order no./nominal length mm PU mm set set set set set set set set set Additional divider for OrgaStore Deluxe 3 Beech lacquered Order no. PU Double walled drawer system InnoTech

116 Double-walled steel drawer system InnoTech preassembled under-sink drawer OrgaFlex with plastic containers For utilising the space below the sink Freely positionable and removable plastic containers provide additional storage space to the right and/or left of the siphon and flexibly adapt to the specific situation they are used in Designed for standard cabinet widths Nominal length 470 mm The following components are all you need for assembling an InnoTech drawer for sink cabinets: 31 OrgaFlex preassembled drawer for sink cabinets + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see page Preassembled drawer for sink cabinets OrgaFlex 31 Cabinet width Number of Order no. PU mm OrgaFlex plastic containers Front connectors White plastic Assembly Order no. PU A With expanding dowel /40 B Screw-on /40 A B Fixing with countersunk chipboard screw ø 3,5 mm Additional plastic container With lid and support Plastic Order no. PU Double walled drawer system InnoTech

117 Double-walled steel drawer system InnoTech preassembled under-sink drawer OrgaFlex with plastic containers Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 For further details see page , ,5 12 9, ,5 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12, ,5 40, ,5 46, ,5 4, ,5 37, KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 KD EB KD EB By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 Dimension A ,5 10,5 9, Double walled drawer system InnoTech

118 Double-walled steel drawer system InnoTech preassembled under-sink drawer Cut-out railing for under-sink drawer InnoTech preassembled drawer for sink cabinets For utilising the space below the sink Designed for a standard 900 mm cabinet width Nominal length 470 mm Powder-coated steel, silver The following components are all you need for assembling an InnoTech drawer for sink cabinet: 32 Preassembled drawer for sink cabinets + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see page Preassembled drawer for sink cabinets Order no. PU Cut-out railing for under-sink drawer For utilising the space below the sink For customised drawer widths The following components are all you need for assembling an InnoTech drawer for sink cabinets: 33 Cut-out railing for under-sink drawer + Pot-and-pan drawer set, height 144 mm see pages Front connectors with expanding dowel or to screw-on + Aluminium rear panel see pages or Wooden rear panel, mm + Quadro drawer slides see page Bottom panel, mm 33 Order no. PU Cut sizes for the drawer base see page Front connectors White plastic Assembly Order no. PU A With expanding dowel /40 B Screw-on /40 A B Fixing with countersunk chipboard screw ø 3,5 mm Double walled drawer system InnoTech

119 Double-walled steel drawer system InnoTech preassembled under-sink drawer Cut-out railing for under-sink drawer Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page ø4 ø6,3 12 9, ø4 ø6,3 12 9, ø4 ø6,3 12 9, ø4 ø6,3 9, ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12, ,5 40, ,5 4, ,5 4, ,5 37, KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 KD EB KD EB By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 Dimension A ,5 10,5 9,5 B ø5 x K L C1 D 471,5 M A H C2 Wooden rear panel 3x ø3,5x Aluminium rear panel 2x 100 ø3,5x12 Size Wooden rear panel Aluminium rear panel A Bottom panel depth NL + 10 NL - 3 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C1 Rear panel width K - 20 K - 20 C2 Rear panel width H - 20 H - 20 D Rear panel height 144 L Cut-out depth M Hole distance NL = nominal length/lb = inside cabinet width Dimensions Order no. PU mm ø 3,5 x ø 3,5 x Double walled drawer system InnoTech

120 Double-walled steel drawer system InnoTech preassembled electrical appliance drawer Includes 2 wired socket outlets with child guard With pre-installed wiring Designed for standard cabinet widths Nominal length 470 mm The system is pre-mounted and comes with two wired socket outlets with child guard Must only be connected to a 230V/50 Hz/ A mains power supply The following components are all you need for assembling an InnoTech electrical appliance drawer: 34 Preassembled electrical pot-and-pan drawer + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see page Approved for use in: Germany, Sweden, Norway, Finland, Spain, Italy! 34 Preassembled electrical pot-and-pan drawer 34 Cabinet width Order no. PU mm Front connectors White plastic Assembly Order no. PU A B A B With expanding dowel /40 Screw-on /40 Fixing with countersunk chipboard screw ø 3,5 mm A 3x ø10x12,5 min min ,5 12 9,5 min. 86 KD EB 32 min. 90,5 46 ø50 EB 41,5 55, Double walled drawer system InnoTech

121 Double-walled steel drawer system InnoTech preassembled XXL drawer For additionally utilising storage space at plinth level With spill-proof plastic tub Create space for large and bulky items, from saucepans and buckets to bottle crates With plinth lifting mechanism for neat appearance and smooth running action without leaving scratches or marks Designed for standard cabinet widths Nominal length 470 mm The following components are all you need for assembling an InnoTech XXL drawer: 35 Preassembled XXL drawer + Front connectors with expanding dowel or to screw-on + Quadro drawer slides V6+ Silent System or V8 Silent System see pages Preassembled XXL drawer Cabinet width Order no. PU mm Front connectors White plastic Assembly Order no. PU A B A B With expanding dowel /40 Screw-on /40 Fixing with countersunk chipboard screw ø 3,5 mm Quadro V6+ Silent System = min. 485 Quadro V8 Silent System = min. 505 A 3x ø10x12,5 141 T (min. 47) min Nominal length ø5x13 13 Cross member 141 4,5 min. T T 32 KDEB = = = min. 125 Leveller see group = = = 867 Double walled drawer system InnoTech

122 Double-walled steel drawer system InnoTech for under-oven bottom drawer Height 54 mm Quick insertion and removal of the drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Cabinet width 600 mm or customised cabinet widths Nominal length 470 mm Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech under-oven drawer for cabinet width of 600 mm: 36 Preassembled drawer, height 54 mm + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see page Preassembled drawer, height 54 mm contains: 1 pcs drawer, powder-coated steel, silver, 3-sided, preassembled, complete with silver-grey drawer bottom panel 2 pcs cover caps with Hettich logo Order no. PU Cover caps with customised imprint available on request 36 Drawer set, height 54 mm contains: 1 set drawer profiles, powder-coated steel 1 set back panel connectors, powder-coated steel 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm The following components are all you need for assembling a customised InnoTech under-oven drawer: Drawer set, height 54 mm + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see page Bottom and rear panel, mm Nominal length Order no./ PU mm finish silver anthracite set Cover caps with customised imprint available on request Front connectors White plastic Assembly Order no. PU A With expanding dowel /40 B Screw-on /40 A B Fixing with countersunk chipboard screw ø 3,5 mm Double walled drawer system InnoTech

123 Double walled steel drawer system InnoTech for variable drawer widths Height 54 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page ø4 ø6,3 12 9,5 54 ø4 ø6, , ø4 ø6, , ø4 ø6, ,5 33 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors 40,5 4,5 A 2x ø10x12, A 2x ø10x12,5 4, ,5 A 2x ø10x12,5 32 4, ,5 A 2x ø10x12,5 32 4, ,5 KD EB KD EB KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) Quadro installation width (EB) 12,5 10,5 9,5 Dimension A ,5 10,5 9,5 Dimensions LT Wooden rear panel NL C LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel A Bottom panel depth NL + 10 B Bottom panel width LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 D Rear panel height 53 B LB A D x ø3,5x12 Dimensions Order no. PU mm ø 3,5 x ø 3,5 x Double walled drawer system InnoTech

124 XXL under-oven drawer For additionally utilising the space at plinth level below the oven With non-spill plastic tub and moveable storage tray Creates space for large and bulky items With plinth lifting mechanism for neat appearance and smooth running action without leaving scratches or marks For plinth heights from 100 mm Cabinet width 600 mm Nominal length 470 mm The following components are all you need for assembling a XXL under-oven drawer: 37 Preassembled XXL under-oven drawer + Quadro drawer slides see pages XXL under-oven drawer contains: 1 plastic tub with storage tray 2 plinth lifting mechanisms 2 front connections 2 levelling feet right/left Plinth height min. Order no. PU mm Mounting application ,5 / 142,5 min ,5 T Y T min KS Y = drawer front overlay T = space required for plinth ø4 92,5 / 142, ø4 ø6,3 = minimum number of screw-fixing positions Plinth hole pattern Drawer front hole pattern Y min. 81 ø5 26,5 T , ,5 ø4 ø6, Double walled drawer system InnoTech

125 i Range summary Waste systems behind drawer fronts for InnoTech drawer system InnoTech Pull InnoFlex Bin.it Flex top-running for InnoTech pull-out cabinets Quadro full-extension slide Dampened closure Silent System bottom-running for InnoTech pot-and-pan drawers Quadro full-extension slide Dampened closure Silent System for InnoTech pot-and-pan drawers Quadro full-extension slide Dampened closure Silent System InnoDeluxe InnoTech Vario bottom-running for InnoTech pot-and-pan drawers Quadro full-extension slide Dampened closure Silent System Stainless steel look for InnoTech pot-and-pan drawers Quadro full-extension slide Dampened closure Silent System Stainless steel look Double walled drawer system InnoTech

126 Technical information i Wooden rear panel assembly Steel/stainless-steel drawer Wooden rear panel assembly Beech drawer/pot-and-pan drawer ø3,5x12 Rear panel connector Steel/stainless-steel pot-and-pan drawer ø3,5x12 Rear panel connector Drawer installation ø3,5x12 Alternatively: Knock adapter claws into the base Double walled drawer system InnoTech

127 i Technical information InnoFit Pro For assembling InnoTech drawers and pot-and-pan drawers Quickly set using latch levers for - Drawer widths of 275 mm and 300 to 1200 mm in 50 mm increments - Drawer depths of 260, 300, 350, 420, 470, 520 and 620 mm - Rear panel heights of 70, 144 and 176 mm Also for customised drawer widths Sturdy aluminium frame Order no. PU For further assembly machinery, see Group 2 Railing installation Steel/stainless steel Railing installation Beech ø3,5 Double walled drawer system InnoTech

128 Technical information i Quadro drawer slides assembly Fitting drawer Remove drawer Double walled drawer system InnoTech

129 i Technical information Installing front panel Removing front panel Toolless assembly Toolless disassembly Adjusting front panel Toolless height adjustment Side adjustment on right-hand drawer profile only ±2 mm ± 1,5 mm Tilt adjustment Double walled drawer system InnoTech

130 Technical information i Installing front panel Internal drawer Basic ø3,5x40 Removing front panel Internal drawer Exclusiv 4x M3,5 x 19 = = = ca LB - 2 x EB -101 ø4 ø3,5 x Double walled drawer system InnoTech

131 i Technical information Installing front panel Internal pot-and-pan drawer Basic ø3,5x40 Removing front panel Internal pot-and-pan drawer Exclusiv 2x M3,5 x 8 4x M3,5 x 19 = = = ca LB - 2 x EB -101 ø4 ø3,5 x 12 Double walled drawer system InnoTech

132 Technical information i Assembly of add-on set, 2nd railing level Assembly of add-on set, lengthwise railing ø3, Double walled drawer system InnoTech

133 i Technical information Side stabilizer assembly ø 2,5 Drilling jig 40 22,5 EB 9,5=14,6 EB 10,5=14,6 EB 12,5=12,6 EB 9,5/10,5 = inside cabinet width - 2 x EB - 37 EB 12,5 = inside cabinet width - 2 x EB - 33 ø3,5x Anti-tilt assembly 26,4 ø5 20,6 12,5 Double walled drawer system InnoTech

134

135 i Range summary 5.3 Single-wall steel drawer system MultiTech MultiTech Drawer profile height 54 mm MultiTech Drawer profile height 86 mm MultiTech Drawer profile height 118 mm MultiTech Drawer profile height 150 mm MultiTech Drawer profile height 214 mm MultiTech Railing set for pot-and-pan drawers/ Cabinet side view and hole positions MultiTech Hanging file frame set/ Accessories for central lock MultiTech Accessories MultiTech Technical information/ Assembly aid MultiFit Pro Single-wall steel drawer system MultiTech 5.3.1

136 Single-wall steel drawer system MultiTech Drawer profile Full range with drawer profile heights of 54, 86, 118, 150 and 214 mm, the variable drawer system ensures a large variety of uses. Depths ranging from 250 to 550 mm ensure perfect variability. Drawer runner Roller runner with partial or over-extension Load capacity: 25 kg with partial-extension 30 kg with over-extension With integrated self-closing effect and double stop With captive guide rail on one side and automatic tolerance compensation Single-wall steel drawer system MultiTech

137 Single-wall steel drawer system MultiTech Use storage space effectively MultiTech internal drawers enlarge the available storage space considerably Use the space under the built-in kitchen range effectively MultiTech with a drawer profile height of 54 mm Broad application spectrum The extensive arge range of accessories allows MultiTech system components to be used for a variety of purposes in the kitchen, office, living room or bedroom... Plenty of space for large or bulky items MultiTech with a drawer profile heigth of 214 mm Single-wall steel drawer system MultiTech 5.3.3

138 Single-wall steel drawer system MultiTech for variable drawer widths Drawer profile height 54 mm Single-wall steel drawer system with roller runner as partially extending system with self-closing function Load capacity 25 kg No bottom panel machining Quick insertion and removal of the drawer Simple assembly and front panel adjustment One-sided constrained guidance, automatic tolerance compensation ±1 mm Integrated double stop The following components are all you need for assembling a MultiTech drawer: Drawer set, height 54 mm + Front connectors + Bottom and rear panel, mm Drawer set, height 54 mm contains: 1 set drawer profiles, powder-coated steel 1 set cabinet rails (part-extension), powder-coated steel Nominal length Order no. PU mm white grey /10 sets /10 sets /10 sets /10 sets /10 sets /10 sets /10 sets Front connectors Nickel-plated zinc die-cast A B Assembly Order no. PU A Press-in /10 sets B Screw on /10 sets Technical information see page Single-wall steel drawer system MultiTech

139 Single-wall steel drawer system MultiTech for variable drawer widths Drawer profile height 54 mm Hole position Roller runner/minimum installation height Part-extension For further details see page ø3,5 ø6,3 min. 24 Fixing screws Dimensions mm Order no. PU min ø 6,3 x 10, ø 6,3 x ø 3,5 x ø 3,5 x ø 4,0 x ø4x12 Hole position Front connectors Hole position Rear panel Drawer ø2,5 ø10x12,5 9 2x ø4x ,5 8,5 8,5 Dimensions LT NL C LB = inside cabinet width NL = nominal length NH = nominal height, 54 mm Size Drawer A Shelf depth NL - 3 NH D B Shelf width LB - 32 C Rear panel width LB - 32 B A D Rear panel height 39 LT Inside cabinet depth min. NL + 5 LB Processing technology see group 2 Single-wall steel drawer system MultiTech 5.3.5

140 Single-wall steel drawer system MultiTech for variable drawer/internal drawer widths Drawer profile height 86 mm Single-wall steel drawer system with roller runner as part-extension or over-extension with self-closing effect Load capacity 25 kg (part-extension) 30 kg (over-extension) No bottom panel machining Quick insertion and removal of the drawer/internal drawer Simple assembly and front panel adjustment One-sided constrained guidance, automatic tolerance compensation ±1 mm Integrated double stop The following components are all you need for assembling a MultiTech drawer/internal drawer: Drawer set, height 86 mm contains: 1 set drawer profiles, powder-coated steel 1 set cabinet rails (part-extension), powder-coated steel Drawer set, height 86 mm + Front connectors + Bottom and rear panel, mm Optional: Cover cap Front connector for internal drawer Additional set for over-extension Nominal length Order no. PU mm white grey /10 sets /10 sets /10 sets /10 sets /10 sets /10 sets /10 sets Front connectors Nickel-plated steel A B C Assembly Order no. PU A Press-in /20 B Screw on /20 C With expanding sockets /20 Cover cap Plastic Finish Order no. PU white /20 grey /20 Cover caps with customised imprint available on request Front connector for internal drawer Plastic Finish Order no. PU white /10 sets grey /10 sets Technical information see page Additional set for over-extension contains: 1 set cabinet rails, powder-coated steel (the cabinet rails from the drawer kit must not be used!) 1 set centre profile, powder-coated steel 1 set safety catch, plastic Nominal length Order no. PU mm white grey /10 sets /10 sets /10 sets /10 sets /10 sets Single-wall steel drawer system MultiTech

141 Single-wall steel drawer system MultiTech for variable drawer/internal drawer widths Drawer profile height 86 mm Hole position Roller runner/minimum installation height Part-extension Over-extension For further details see page ø3,5 ø6,3 ø3,5 ø6,3 min. 24 min. 56 Fixing screws min min Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x ø 3,5 x ø 3,5 x ø4x12 ø4x12 ø 4,0 x Hole position Front connectors Hole position Rear panel Drawer Internal drawer ø2,5 ø10x12, x ø4x x ø3,5x ,5 18,5 8,5 8,5 Dimensions LT NL C LB = inside cabinet width NL = nominal length NH = nominal height, 86 mm Size Drawer Internal drawer A Shelf depth NL - 3 NL - 19 E NH D B Shelf width LB - 32 LB - 32 C Rear panel width LB - 32 LB - 32 F B A D Rear panel height E Front panel - LB - 58 LB F Front height - 71 LT Inside cabinet depth min. NL + 5 min. NL + 14 Processing technology see group 2 Single-wall steel drawer system MultiTech 5.3.7

142 Single-wall steel drawer system MultiTech for variable drawer/internal drawer widths Drawer profile height 118 mm Single-wall steel drawer system with roller runner as part-extension or over-extension with self-closing effect Load capacity 25 kg (part-extension) 30 kg (over-extension) No bottom panel machining Quick insertion and removal of the drawer/internal drawer Simple assembly and front panel adjustment One-sided constrained guidance, automatic tolerance compensation ±1 mm Integrated double stop The following components are all you need for assembling a MultiTech drawer/internal drawer: Drawer set, height 118 mm contains: 1 set drawer profiles, powder-coated steel 1 set cabinet rails (part-extension), powder-coated steel Drawer set, height 118 mm + Front connectors + Bottom and rear panel, mm Optional: Cover cap Front connector for internal drawer Additional set for over-extension Nominal length Order no. PU mm white grey /10 sets /10 sets /10 sets /10 sets /10 sets /10 sets /10 sets Front connectors Nickel-plated steel A B C Assembly Order no. PU A Press-in /20 B Screw on /20 C With expanding sockets /20 Cover cap Plastic Finish Order no. PU white /20 grey /20 Cover caps with customised imprint available on request Front connector for internal drawer Plastic Finish Order no. PU white /10 sets grey /10 sets Technical information see page Additional set for over-extension contains: 1 set cabinet rails, powder-coated steel (the cabinet rails from the drawer kit must not be used!) 1 set centre profile, powder-coated steel 1 set safety catch, plastic Nominal length Order no. PU mm white grey /10 sets /10 sets /10 sets /10 sets /10 sets Single-wall steel drawer system MultiTech

143 Single-wall steel drawer system MultiTech for variable drawer/internal drawer widths Drawer profile height 118 mm Hole position Roller runner/minimum installation height Part-extension ø3,5 ø6,3 Over-extension ø3,5 ø6,3 For further details see page min. 24 min min. 5 ø4x min. 5 ø4x Fixing screws Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x ø 3,5 x ø 3,5 x ø 4,0 x Hole position Front connectors Hole position Rear panel Drawer Internal drawer ø2,5 ø10x12, x ø3,5x x ø4x12 40,5 34,5 18,5 8,5 Dimensions E NH F B LB LT NL A C D LB = inside cabinet width NL = nominal length NH = nominal height, 118 mm Size Drawer Internal drawer A Shelf depth NL - 3 NL - 19 B Shelf width LB - 32 LB - 32 C Rear panel width LB - 32 LB - 32 D Rear panel height E Front panel - LB - 58 F Front height LT Inside cabinet depth min. NL + 5 min. NL + 14 Processing technology see group 2 Single-wall steel drawer system MultiTech 5.3.9

144 Single-wall steel drawer system MultiTech for variable drawer/internal drawer widths Drawer profile height 150 mm Single-wall steel drawer system with roller runner as part-extension or over-extension with self-closing effect Load capacity 25 kg (part-extension) 30 kg (over-extension) No bottom panel machining Quick insertion and removal of the drawer/internal drawer Simple assembly and front panel adjustment One-sided constrained guidance, automatic tolerance compensation ±1 mm Integrated double stop The following components are all you need for assembling a MultiTech drawer/internal drawer: Drawer set, height 150 mm contains: 1 set drawer profiles, powder-coated steel 1 set cabinet rails (part-extension), powder-coated steel Drawer set, height 150 mm + Front connectors + Bottom and rear panel, mm Optional: Cover cap Front connector for internal drawer Additional set for over-extension Nominal length Order no. PU mm white grey /10 sets /10 sets /10 sets /10 sets /10 sets /10 sets /10 sets Front connectors Nickel-plated steel A B C Assembly Order no. PU A Press-in /20 B Screw on /20 C With expanding sockets /20 Cover cap Plastic Finish Order no. PU white /20 grey /20 Cover caps with customised imprint available on request Front connector for internal drawer Plastic Finish Order no. PU white /10 sets grey /10 sets Technical information see page Additional set for over-extension contains: 1 set cabinet rails, powder-coated steel (The cabinet rails from the drawer kit must not be used!) 1 set centre profile, powder-coated steel 1 set safety catch, plastic Nominal length Order no. PU mm white grey /10 sets /10 sets /10 sets /10 sets /10 sets Single-wall steel drawer system MultiTech

145 Single-wall steel drawer system MultiTech for variable drawer/internal drawer widths Drawer profile height 150 mm Hole position Roller runner/minimum installation height Part-extension Over-extension ø3,5 ø6,3 ø3,5 ø6,3 For further details see page min. 24 min Fixing screws min. 5 ø4x min. 5 ø4x12 Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x ø 3,5 x ø 3,5 x ø 4,0 x Hole position Front connectors Drawer Internal drawer Hole position Rear panel ø2,5 ø10x12, x ø4x x ø3,5x ,5 52,5 18,5 8,5 Dimensions Processing technology see group 2 E NH F LT NL B LB A C D LB = inside cabinet width NL = nominal length NH = nominal height, 150 mm Size Drawer Internal drawer A Shelf depth NL - 3 NL - 19 B Shelf width LB - 32 LB - 32 C Rear panel width LB - 32 LB - 32 D Rear panel height E Front panel - LB - 58 F Front height LT Inside cabinet depth min. NL + 5 min. NL + 14 Single-wall steel drawer system MultiTech

146 Single-wall steel drawer system MultiTech for variable drawer widths Drawer profile height 214 mm Single-wall steel drawer system with roller runner as part-extension or over-extension with self-closing effect Load capacity 25 kg (part-extension) 30 kg (over-extension) No bottom panel machining Quick insertion and removal of the drawer Simple assembly and front panel adjustment One-sided constrained guidance, automatic tolerance compensation ±1 mm Integrated double stop The following components are all you need for assembling a MultiTech drawer: Drawer set, height 214 mm + Front connectors + Bottom and rear panel, mm Optional: Cover cap Additional set for over-extension Drawer set, height 214 mm contains: 1 set drawer profiles, powder-coated steel 1 set cabinet rails (part-extension), powder-coated steel Nominal length Order no. PU mm white grey /5 sets /5 sets /5 sets /5 sets /5 sets Front connectors Nickel-plated steel A B C Assembly Order no. PU A Press-in /20 B Screw on /20 C With expanding sockets /20 Cover cap Plastic Additional set for over-extension contains: 1 set cabinet rails, powder-coated steel (The cabinet rails from the drawer kit must not be used!) 1 set centre profile, powder-coated steel 1 set safety catch, plastic Finish Order no. PU white /20 grey /20 Cover caps with customised imprint available on request Technical information see page Nominal length Order no. PU mm white grey /10 sets /10 sets /10 sets /10 sets /10 sets Single-wall steel drawer system MultiTech

147 Single-wall steel drawer system MultiTech for variable drawer widths Drawer profile height 214 mm Hole position Roller runner/minimum installation height Part-extension Over-extension For further details see page ø3,5 ø6,3 ø3,5 ø6,3 min. 24 min Fixing screws Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x min. 5 min. 5 ø 3,5 x ø 3,5 x ø 4,0 x ø4x12 ø4x12 Hole position Front connectors Drawer Hole position Rear panel Dimensions LB = inside cabinet width NL = nominal length NH = nominal height, 214 mm LT NL ø2,5 ø10x12 9 C 3x ø4x NH D 64 B A 136,5 96 LB ø 2,5 8,5 Processing technology see group 2 18,5 Size Drawer A Shelf depth NL - 3 B Shelf width LB - 32 C Rear panel width LB - 32 D Rear panel height 199 LT Inside cabinet depth min. NL + 5 Single-wall steel drawer system MultiTech

148 Single-wall steel drawer system MultiTech for front pull-outs Railing set MultiTech drawer sets with drawer profile widths of 86, 118 and 150 mm can be combined with the railing set to create pot-and-pan drawers For drawer lengths 350, 400, 450, 500 and 550 mm Load capacity 25 kg (part-extension) 30 kg (over-extension) The following components are all you need for assembling a MultiTech pot-and-pan drawer: Drawer set (see page ) + Front connectors (see page ) + Railing set + Bottom and rear panel, mm Optional: Cover cap (see page ) Additional set for over-extension (see page ) Crosswise railing Mount for crosswise railing Railing set contains: 2 railing tubes, powder-coated steel 2 drawer front connections with expanding socket for railing bar Nominal length Order no. PU mm white grey /10 sets /10 sets /10 sets /10 sets /10 sets Crosswise railing Custom length Length 1100 mm Powder-coated steel Crosswise railing length = inside cabinet width - 38 Hole position Front connectors ø10x12,5 6,5 Hole position Rear panel 9 2x 12,5 ø3,5x12 32 ø2,5 ø10x12,5 Y 2x ø4x12 RW 64 Z Order no. PU white grey /5 Mount for crosswise railing Plastic Order no. PU white grey /40 Technical information see page ,5 X Drawer profile Size Size Size Size height mm RW mm X mm Y mm Z mm 86 min ,5 Rear panel height min ,5 bottom panel 64 thickness - 6,5 150 min , , Single-wall steel drawer system MultiTech

149 Single-wall steel drawer system MultiTech Cabinet side view and hole positions Part-extension Cabinet front edge Drawer Cabinet front edge! ø3,5 ø6,3 Nominal length 37 9 Internal drawer Cabinet front edge 37 EL b1 b2 b3 Min. cabinet depth = minimum number of screw-fixing positions!! Nominal length Hole spacing mm Extension loss Min. cabinet depth mm mm b1 b2 b3 EL mm drawer internal drawer Over-extension Drawer Cabinet front edge! Cabinet front edge ø3,5 ø6,3 Nominal length 37 Internal drawer Cabinet front edge b1 b2 Min. cabinet depth = minimum number of screw-fixing positions 37! Nominal length Hole spacing mm Min. cabinet depth mm mm b1 b2 drawer internal drawer Processing technology see group 2 Single-wall steel drawer system MultiTech

150 Single-wall steel drawer system MultiTech Hanging file frame set/accessories for central lock MultiTech drawer sets with frame heights of 86, 118 and 150 mm can be used with the file frame set for office applications. For drawer lengths 400, 450, 500 and 550 mm Load capacity 25 kg (part-extension) 30 kg (over-extension) The following components are all you need for assembling a MultiTech drawer with hanging file frame: Drawer set (see page ) + Front connectors (see page ) + Hanging file frame set + Bottom and rear panel, mm Optional: Cover cap (see page ) Additional set for over-extension (see page ) Locking stop for central locking Locking device for central lock with anti-tilt blokking function Locking bar Cylinder cam lock including rosette Hanging file frame set contains: 2 file frame profiles, nickel-plated steel 4 adapters for file frame profiles, left/right Nominal length Order no. PU mm set set set set Accessories for central lock Locking stop Locking device Order no. PU /10 Order no. PU /10 Locking bar With five adjustable pins Cylinder cam lock including rosette Barrel Z23 see group 7.2 Order no. PU Order no. PU Technical information see page Single-wall steel drawer system MultiTech

151 Single-wall steel drawer system MultiTech Hanging file frame set/accessories for central lock Hole position for adapter Front Rear panel 2x ø3,5x,5 ø4 9, ,2 L 32 R 26 32,5 14,2 9,5 2x ø3,5x H K 21 L M 8,5 H = rear panel height + panel thickness - 9,5 min. K = L - 2 x,5 + 2 x 26 K + 32 Central lock 37 Lock ,5 18,5 ø ø7 G Height Size G mm mm Part-extension Over-extension 86 76,5 44, ,5 76, ,5 108,5 Processing technology see group 2 Single-wall steel drawer system MultiTech

152 Single-wall steel drawer system MultiTech Accessories Cutlery tray Universal application for nominal lengths 450 and 500 mm Cutlery tray depth mm White plastic, high-gloss laminate For cabinet width Order no. PU mm / / / / / /10 The wide rim can be trimmed to fit drawer size. Use a circular saw and calculate tray size using the following formulae Trim sizes for cutlery tray Trimmed width = inside cabinet width - 32 mm Trimmed depth = nominal length - 17 mm (for rear panel mm) 81 Cutlery tray 50 ±1 Possible trim sizes Cutlery tray depth mm Cutlery tray Width For cabinet width Single-wall steel drawer system MultiTech

153 Single-wall steel drawer system MultiTech Accessories Spacers/distance rail for side clearance For drawers positioned behind doors The spacers/distance rail bridge the door/hinge protrusion For larger clearances several spacers can be clipped together White plastic Article Distance Order no. PU mm Spacers / / /100 Distance rail Stop attachment For 5 mm hole diameter Transparent plastic ø8 Order no. PU /1000 1,5 5,5 ø5 Stop attachment For 6 mm hole diameter Plastic 1,5 ø8 7 ø6 Finish Order no. PU white /1000 brown /1000 beige /1000 Stop attachment ø 8 mm, self-adhesive Transparent plastic Order no. PU Single-wall steel drawer system MultiTech

154 Single-wall steel drawer system MultiTech Technical information/assembly aid MultiFit Pro i Drawer installation 4x ø4x12 4x ø4x12 Assembly aid for MultiTech drawers MultiFit Pro For assembling MultiTech drawers and pot-and-pan drawers Quickly set using latch levers for - Drawer widths of 275 mm and 300 to 900 mm in 50 mm increments - Drawer depths of 250, 275, 350, 400, 500 and 550 mm - Rear-panel heights of 86, 118, 150 and 214 mm Also for customised drawer widths Sturdy aluminium frame For further details see page Order no. PU Mounting the cabinet rails/engaging the drawer Part-extension Processing technology see group Single-wall steel drawer system MultiTech

155 i Single-wall steel drawer system MultiTech Technical information Over-extension Assembly of the front connectors... press-in... screw on... with expanding sockets ø10x12,5 4x ø10x12,5 ø3,5 Processing technology see group 2 Single-wall steel drawer system MultiTech

156 Single-wall steel drawer system MultiTech Technical information i Assembly of the front panels Drawer click Pot-and-pan drawer 4x ø3,5 click Internal drawer click 4x ø3,5 click Front panel removal 45 Article Order no. PU Disassembly tool Front adjustment Height adjustment Side adjustment Tilt adjustment ± 1,5 m ± 2 mm Processing technology see group Single-wall steel drawer system MultiTech

157 i Single-wall steel drawer system MultiTech Technical information Hanging file frames click Locking device/locking stop 2x ø4,5x Processing technology see group 2 Single-wall steel drawer system MultiTech

158 Single-wall steel drawer system MultiTech Technical information i Locking bar Extension is stopped by the first notch The integrated double stop, second notch, engages the extension in the front position Processing technology see group Single-wall steel drawer system MultiTech

159 i Range summary 5.4 Partial and full-extension runners for wooden drawers Drawer slides Quadro Range summary/technical comparison Ball bearing slides Range summary/technical comparison Roller runners Range summary/technical comparison Partial and full-extension runners for wooden drawers 5.4.1

160 Range summary/technical comparison Drawer slides Quadro i Quadro for wooden drawers with grooved frame and pull-out shelves, slide-on application Quadro V6 Silent System Quadro 30 Silent System Quadro V6 Page number Brief description Full-extension with Partial-extension with Full-extension with integrated dampened closure integrated dampened closure integrated self-closing effect Load capacity 30 kg 30 kg 30 kg For drawer lengths mm mm mm Assembly to the cabinet side to the cabinet side to the cabinet side Quadro for wooden drawers with rebated frame, slide-on application Quadro V6+ Silent System Quadro V6 Silent System Page number Brief description Full-extension with integrated dampened closure Full-extension with integrated dampened closure Load capacity 50 kg 30 kg For drawer lengths mm mm Assembly to the cabinet side to the cabinet side Quadro for wooden drawers and pull-out shelves, plug-on assembly Quadro 25 Silent System Quadro 25 Quadro 40 Page number Brief description Partial-extension with Partial-extension with Over-extension integrated dampened closure integrated self-closing effect Load capacity 25 kg 25 kg 40 kg For drawer lengths mm mm mm Assembly to the cabinet side to the cabinet side to the cabinet side Range summary of drawer slides Quadro

161 i Range summary/technical comparison Drawer slides Quadro Quadro Catches Variario Partial-extension with integrated self-closing effect 30 kg mm to the cabinet side Catches for wooden drawers/ pull-out shelves Solid wood drawer insert 500 mm Quadro V6 BM Silent System Quadro 40 BM P 2 O (Push-To-Open) Push-To-Open Accessories Stop attachment/ bracket/ front panel fitting Full-extension with Part-extension Drawer opening system integrated dampened closure 30 kg 40 kg for Quadro drawer slides with integrated self-closing function mm mm on cabinet base on cabinet base Range summary of drawer slides Quadro 5.4.3

162 Full-extension for wooden drawers with grooved frame Quadro V6 Silent System Load capacity 30 kg Slide-on assembly simply place the drawer on the slides and push home Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Flexibility through interchangeability swap between Quadro partial and fullextension slides without changing cabinet, drawer or front panel dimensions! Nominal length/drawer length Hole spacing Min. cabinet depth Order no. mm b1 mm mm PU 1 set PU 10 sets Catch for wooden drawers For safely connecting the Quadro extension and wooden drawer without the aid of tools (slide-on assembly) Infinite height adjustment up to + 2 mm via a knurled wheel (toolless) The set height is retained when the drawer is dismantled Details see page Black plastic Article Order no. PU Catch left Catch right Set left/right /5 sets Pull-out combination system for front and inside drawer see group 9.1 Catch for pull-out shelves/wooden drawers with flush bottom see page Solid wood drawer insert Variario see page Processing technology see group Drawer slides Quadro

163 Full-extension for wooden drawers with grooved frame Quadro V6 Silent System Load capacity 30 kg ø4 ø6,3 max. 7 ø6 12 9, ,5 EB Dimensions mm Order no. PU 6,3 x 10, ,3 x ,0 x ø6 11 Cabinet front edge Nominal length ø4 ø6, b1 Min. cabinet depth = minimum number of screw-fixing positions Assembly Disassembly Drawer slides Quadro 5.4.5

164 Partial-extension for wooden drawers with grooved frame Quadro 30 Silent System Load capacity 30 kg Slide-on assembly simply place the drawer on the slides and push home Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening. Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Flexibility through interchangeability swap between Quadro partial and fullextension slides without changing cabinet, drawer or front panel dimensions! Nominal length/slide length Hole spacing Min. cabinet depth Extension loss Order no. mm b1 mm mm EL mm PU 1 set PU 12 sets Coupling for wooden drawers For safely connecting the Quadro extension and wooden drawer without the aid of tools (slide-on assembly) Infinite height adjustment up to + 2 mm via a knurled wheel (toolless) The set height is retained when the drawer is dismantled Details see page Black plastic Article Order no. PU Catch left Catch right Set left/right /5 sets Pull-out combination system for front and inside drawer see group 9.1 Catch for pull-out shelves/wooden drawers with flush bottom see page Solid wood drawer insert Variario see page Processing technology see group Drawer slides Quadro

165 Partial-extension for wooden drawers with grooved frame Quadro 30 Silent System Load capacity 30 kg ø4 ø6,3 max. 7 ø6 12 9, ,5 EB Dimensions mm Order no. PU 6,3 x 10, ,3 x ,0 x Cabinet front edge 10 ø6 11 Nominal length ø4 ø6, EL 37 b1 Min. cabinet depth = minimum number of screw-fixing positions Assembly Disassembly Drawer slides Quadro 5.4.7

166 Full-extension for wooden drawers with grooved frame Quadro V6 Load capacity 30 kg Stop Control Slide-on assembly simply place the drawer on the slides and push home Stop Control the integrated self-closing mechanism closes drawers reliably and automatically and prevents them opening inadvertently Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Flexibility through interchangeability swap between Quadro partial and fullextension slides without changing cabinet, drawer or front panel dimensions! Nominal length/slide length Hole spacing Min. cabinet depth Order no. mm b1 mm mm PU 1 set PU 15 sets Catch for wooden drawers For safely connecting the Quadro extension and wooden drawer without the aid of tools (slide-on assembly) Infinite height adjustment up to + 2 mm via a knurled wheel (toolless) The set height is retained when the drawer is dismantled Details see page Black plastic Article Order no. PU Catch left Catch right Set left/right /5 sets Pull-out combination system for front and inside drawer see group 9.1 Catch for pull-out shelves/wooden drawers with flush bottom see page Solid wood drawer insert Variario see page Processing technology see group Drawer slides Quadro

167 Full-extension for wooden drawers with grooved frame Quadro V6 Load capacity 30 kg ø4 ø6,3 max. 7 ø6 12 9, ,5 EB 20 Dimensions mm Order no. PU 6,3 x 10, ,3 x ,0 x Cabinet front edge Nominal length ø4 ø6,3 10 ø b1 Min. cabinet depth = minimum number of screw-fixing positions Assembly Disassembly Drawer slides Quadro 5.4.9

168 Partial-extension for wooden drawers with grooved frame Quadro 30 Load capacity 30 kg Stop Control Slide-on assembly simply place the drawer on the slides and push home Stop Control the integrated self-closing mechanism closes drawers reliably and automatically and prevents them opening inadvertently Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Flexibility through interchangeability swap between Quadro partial and fullextension slides without changing cabinet, drawer or front panel dimensions! Nominal length/ Hole spacing Min. cabinet Extension Order no. PU Order no. PU slide b1 mm depth mm loss EL mm length mm set sets set sets set sets set sets set sets set sets set sets set sets set sets set sets set sets set sets set sets set sets set sets set sets Catch for wooden drawers For safely connecting the Quadro extension and wooden drawer without the aid of tools (slide-on assembly) Infinite height adjustment up to + 2 mm via a knurled wheel (toolless) The set height is retained when the drawer is dismantled Details see page Black plastic Article Order no. PU Catch left Catch right Set left/right /5 sets Pull-out combination system for front and inside drawer see group 9.1 Catch for pull-out shelves/wooden drawers with flush bottom see page Solid wood drawer insert Variario see page Processing technology see group Drawer slides Quadro

169 Partial-extension for wooden drawers with grooved frame Quadro 30 Load capacity 30 kg ø4 ø6,3 max. 7 ø6 12 9, EB 20 23,5 Dimensions mm Order no. PU 6,3 x 10, ,3 x ,0 x Cabinet front edge Nominal length 10 ø6 11 ø4 ø6, EL 37 b1 Min. cabinet depth = minimum number of screw-fixing positions Assembly Disassembly Drawer slides Quadro

170 Accessories Quadro V6 Silent System/Quadro V6 Quadro 30 Silent System/Quadro 30 Catch for wooden drawers For safely connecting the Quadro extension and wooden drawer without the aid of tools (slide-on assembly) Infinite height adjustment up to + 2 mm via a knurled wheel (toolless) The set height is retained when the drawer is dismantled Black plastic Article Order no. PU Catch left Catch right Set left/right /5 sets Cabinet side 9 Drawer frame Quadro max Mounting with countersunk wood screws ø 3, ,5 Fixing options Stepless height adjustment of +2 mm Three-sided wooden drawer Four-sided wooden drawer Internal pot-and-pan drawer Drawer slides Quadro

171 Accessories Quadro V6 Silent System/Quadro V6 Quadro 30 Silent System/Quadro 30 Catch for pull-out shelves/wooden drawers with flush bottom For safely connecting the Quadro extension and pull-out shelf without the aid of tools (slide-on assembly) For - 19 mm pull-out shelves Complete with 2 rear mountings; the length of the pull-out shelf/drawer is reduced by 12 mm when using these mountings Black plastic Order no. PU /5 sets Chipboard screw ø 3,5 Pull-out shelf/drawer length = nominal length - 12 mm Pull-out shelf/drawer width = inside cabinet width - mm ,4 Quadro 26,5 Chipboard screw ø 3,5 47,5 ø8 x Chipboard screw ø 3,5 6 Drawer slides Quadro

172 Solid wood drawer insert Variario Variable width adjustable Variable width adjustable from mm or mm For nominal drawer length 500 mm Can be ideally combined with organizer accessories, see below and page Beech lacquered Width mm Order no. PU C A 57 A B B A B A Cutlery insert for insertion in compartment A With 5 diagonal compartments Width 208 mm Depth 418 mm Beech lacquered Order no. PU Knife holder for insertion in compartment A For 6 knives Width 208 mm Depth 418 mm Beech lacquered Order no. PU Drawer slides Quadro

173 Solid wood drawer insert Variario Variable width adjustable Roll holder for insertion in compartment B For 2 rolls Width 208 mm, can be cut to 130 mm Depth 440 mm Stainless steel/beech lacquered Order no. PU Cutlery insert for insertion in compartment B With 2 compartments Width 208 mm, can be cut to 110 mm Depth 440 mm Beech lacquered Order no. PU Spice box holder for insertion in compartments B and C For 5 jars Width 85 mm Depth 440 mm Beech lacquered ø Order no. PU Stainless steel containers for spice box holders 60 Article Order no. PU Salt-cellar Pepper-pot Duster, e.g. for icing sugar Coarse duster Fine duster with acrylic lid ø50 Drawer slides Quadro

174 Full-extension for wooden drawers with rebated frame Quadro V6+ Silent System Load capacity 50 kg Slide-on assembly simply place the drawer on the slides and push home Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Nominal length/slide length Hole spacing mm Min. cabinet depth Order no. mm b1 b2 mm PU 1 set PU 8 sets Catch for wooden drawers with rebated frame For safely connecting the Quadro extension and wooden drawer without the aid of tools (slide-on assembly) Infinite height adjustment up to + 2 mm via a knurled wheel (toolless) The set height is retained when the drawer is dismantled Black plastic Article Order no. PU Catch left Catch right Set left/right /5 sets 9 Cabinet side Drawer frame Quadro Mounting with countersunk wood screws ø 3, ,5 Processing technology see group Drawer slides Quadro

175 Full-extension for wooden drawers with rebated frame Quadro V6+ Silent System Load capacity 50 kg ø4 ø6,3 8 7 ø6 12 9, ,5 EB 12,5 26 Dimensions mm Order no. PU 6,3 x 10, ,3 x ,0 x ø6 11 Cabinet front edge ø4 ø6,3 Nominal length b1 b2 Min. cabinet depth = minimum number of screw-fixing positions Assembly Disassembly Drawer slides Quadro

176 Full-extension for wooden drawers with rebated frame Quadro V6 Silent System Load capacity 30 kg Slide-on assembly simply place the drawer on the slides and push home Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening. Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Nominal length/slide length Hole spacing Min. cabinet depth Order no. mm b1 mm mm PU 1 set PU 10 sets Catch for wooden drawers with rebated frame For safely connecting the Quadro extension and wooden drawer without the aid of tools (slide-on assembly) Infinite height adjustment up to + 2 mm via a knurled wheel (toolless) The set height is retained when the drawer is dismantled Black plastic Article Order no. PU Catch left Catch right Set left/right /5 sets 9 Cabinet side Drawer frame Quadro Mounting with countersunk wood screws ø 3, ,5 Processing technology see group Drawer slides Quadro

177 Full-extension for wooden drawers with rebated frame Quadro V6 Silent System Load capacity 30 kg ø4 ø6,3 8 7 ø6 12 9, ,5 EB 12,5 26 Dimensions mm Order no. PU 6,3 x 10, ,3 x ,0 x ø6 11 Cabinet front edge Nominal length ø4 ø6, b1 Min. cabinet depth = minimum number of screw-fixing positions Assembly Disassembly Drawer slides Quadro

178 Part-extension for wooden drawers Quadro 25 Silent System Load capacity 25 kg Plug-on assembly simply place the drawer on the locating pins and slides Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening Integrated height adjustment up to + 3 mm Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Nominal length/slide length Hole spacing mm Min. cabinet depth Extension loss Order no. mm b1 C mm EL mm PU 1 set PU 12 sets , , , , , , , , , Push-on holder For drawers with flush bottom and pull-out shelves Plastic Article Finish Order no. PU Front mounting beige /200 Rear mounting* white /200 * The length of the pull-out shelf/drawer is reduced by 10 mm when using rear mountings Solid wood drawer insert Variario see page Processing technology see group Drawer slides Quadro

179 Part-extension for wooden drawers Quadro 25 Silent System Load capacity 25 kg Grooved bottom panel Flush bottom panel ø4 ø6,3 max. 7 ø ,5 8 ø4 ø6,3 ø ,5 ø ,5 C C 8 ø6 x 10 6 EB EB 20 Dimensions mm Order no. PU 6,3 x 10, ,3 x ,0 x Cabinet front edge 10 ø6 11 Nominal length C ø4 ø6, EL 37 b1 Min. cabinet depth = minimum number of screw-fixing positions Assembly Grooved bottom panel Flush bottom panel Drawer slides Quadro

180 Part-extension for wooden drawers Quadro 25 Load capacity 25 kg Stop Control Plug-on assembly simply place the drawer on the locating pins and slides Stop Control the integrated self-closing mechanism closes drawers reliably and automatically and prevents them opening inadvertently Integrated height adjustment + 3 mm Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Nominal length/slide length Hole spacing mm Min. cabinet depth Extension loss Order no. PU mm b1 C mm EL mm , /18 sets , /18 sets , /18 sets , /18 sets , /18 sets , /18 sets , /18 sets , /18 sets , /18 sets , /18 sets Push-on holder For drawers with flush bottom and pull-out shelves Plastic Article Finish Order no. PU Front mounting beige /200 Rear mounting* white /200 * The length of the pull-out shelf/drawer is reduced by 10 mm when using rear mountings Solid wood drawer insert Variario see page Processing technology see group Drawer slides Quadro

181 Part-extension for wooden drawers Quadro 25 Load capacity 25 kg Grooved bottom panel Flush bottom panel 33 ø ø4 ø6,3 ø4 ø6,3 max ,5 8 ø6 ø6 11 C C 12 9, ,5 ø6 x 10 6 EB 20 EB 20 Dimensions mm Order no. PU 6,3 x 10, ,3 x ,0 x Cabinet front edge Nominal length C 10 ø6 11 ø4 ø6, EL 37 b1 Min. cabinet depth = minimum number of screw-fixing positions Assembly Grooved bottom panel Flush bottom panel Drawer slides Quadro

182 Over-extension for wooden drawers Quadro 40 Load capacity 40 kg Plug-on assembly simply place the drawer on the locating pins and slides Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks With roll-out prevention and bumpers one roll-out prevention (order number ) and two bumpers are enclosed per set Drawer length Hole spacing mm Min. cabinet depth Over-extension Order no. PU mm b1 C mm OE mm , /12 sets , /12 sets , /12 sets Push-on holder For drawers with flush bottom and pull-out shelves Plastic Article Finish Order no. PU Front mounting beige /200 Rear mounting* white /200 * The length of the pull-out shelf/drawer is reduced by 10 mm when using rear mountings Solid wood drawer insert Variario see page Processing technology see group Drawer slides Quadro

183 Over-extension for wooden drawers Quadro 40 Load capacity 40 kg Grooved bottom panel Flush bottom panel ø4 ø6,3 max. 7 ø6 ø ,5 8 ø4 ø6,3 ø ,5 10 C C 29 36,5 6 ø6 x 10 EB 20 EB 20 Dimensions mm Order no. PU 6,3 x 10, ,3 x ,0 x Cabinet front edge Drawer length C ø4 ø6,3 10 ø6 11 Rubber bumper OE 37 b1 Min. cabinet depth = minimum number of screw-fixing positions Assembly Grooved bottom panel Flush bottom panel Drawer slides Quadro

184 Full-extension for base mounting Quadro V6 BM Silent System Load capacity 30 kg i Slide-on assembly simply place the drawer on the slides and push home Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Nominal length/drawer length Hole spacing Min. cabinet depth Order no. PU mm mm mm set set set set Catch for wooden drawers For safely connecting the Quadro extension and wooden drawer without the aid of tools (slide-on assembly) Infinite height adjustment up to + 2 mm via a knurled wheel (toolless) The set height is retained when the drawer is dismantled Details see page Black plastic Article Order no. PU Catch left Catch right Set left/right /5 sets Catch for pull-out shelves/wooden drawers with flush bottom For safely connecting the Quadro extension and pull-out shelf without the aid of tools (slide-on assembly) For - 19 mm pull-out shelves Complete with 2 rear mountings; the length of the pull-out shelf/drawer is reduced by 12 mm when using these mountings Details see page Black plastic Order no. PU /5 sets Solid wood drawer insert Variario see page Processing technology see group Drawer slides Quadro

185 Full-extension for base mounting Quadro V6 BM Silent System Load capacity 30 kg max. 7 ø EB 20 22,5 28 ø4 Dimensions mm Order no. PU 4,0 x ø6 11 Cabinet front edge Nominal length ø b1 Min. cabinet depth At least 4 screws per Quadro for attaching to base Assembly Disassembly Drawer slides Quadro

186 Partial-extension for bottom panels Quadro 40 BM Load capacity 40 kg Plug-on assembly simply place the drawer on the locating pins and slides Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Integrated height adjustment + 3 mm With roll-out guard one roll-out guard is included in each set (order no ) Drawer length Hole spacing mm Min. cabinet depth Extension loss Order no. PU mm b1 C mm EL mm , set , set , set Push-on holder For drawers with flush bottom and pull-out shelves Plastic Article Finish Order no. PU Front mounting beige /200 Rear mounting* white /200 * The length of the pull-out shelf/drawer is reduced by 10 mm when using rear mountings Solid wood drawer insert Variario see page Processing technology see group Drawer slides Quadro

187 Partial-extension for bottom panels Quadro 40 BM Load capacity 40 kg Grooved bottom panel Flush bottom panel ø ,5 ø6 ø6 11 C C ,5 ø6 x , ,5 ø4 Dimensions mm Order no. PU 4,0 x Cabinet front edge Drawer length C 10 ø6 11 ø EL b1 Min. cabinet depth At least 4 screws per Quadro for attaching to base Assembly Grooved bottom panel Flush bottom panel Drawer slides Quadro

188 Drawer opening system P 2 O (Push-To-Open) for Quadro drawer slides with integrated self-closing function Push-To-Open For opening handleless wooden drawers A nudge is all it takes to open the drawer Suitable for use with Quadro drawer slides for slide-on assembly (see pages ) and Quadro drawer slides for plug-on assembly (see pages ) A trial mounting is recommended Set contains: P 2 O-mechanical Screw-on panel plate ø3 Order no. PU set 13 ø3 ø3 14,5 42,5 19 adjustable mm 42, ,5 85 Mounting examples! Drawer slides Quadro

189 Accessories for drawer slides Quadro Stop attachment For 5 mm hole diameter Transparent plastic Stop attachment For 6 mm hole diameter Plastic ø8 ø8 1,5 7 ø6 Order no. PU /1000 1,5 5,5 ø5 Finish Order no. PU white /1000 brown /1000 beige /1000 Stop attachment ø 8 mm, self-adhesive Transparent plastic Bracket For fixing drawer bottoms and rear panels White plastic 10,7 15 4,7 Order no. PU Order no. PU /200 Front panel fitting For two-dimensional adjustment of fronts on 4-sided drawers For knocking into the drawer fronts White plastic ø5 ± ± ø20 10 Use ø 4 mm countersunk screws to fix the front panel fitting. Order no. PU /200 Screw length = frame thickness + 10 mm fitting thickness After adjustment, the front panel must be secured by means of one additional countersunk screw. Spacer discs/bar see page Drawer slides Quadro

190 Range summary/technical comparison Ball bearing slides i Ball bearing slide systems for slot mounting KA 1730 KA 270 KA 290 Page number Brief description Part-extension Part-extension Over-extension Load capacity 10 kg 12 kg 20 kg For drawer lengths mm mm mm Groove measurement 17 mm 27 mm 27 mm Ball bearing slide systems for 12,7 mm installed width, mounted on sides KA 3432 KA 5332 KA 5632 SC Page number Brief description Part-extension, detachable Full-extension, detachable Full-extension with integrated self-closing effect, detachable Load capacity 34 kg 30 kg 40 kg For drawer lengths mm mm mm Ball bearing slide systems for 12,7 mm installed width, mounted on sides Page number KA KA Brief description Full-extension, detachable Over-extension, detachable Load capacity 45 kg 60 kg For drawer lengths mm mm Range summary of ball bearing slides

191 i Range summary/technical comparison Ball bearing slides Ball bearing slide systems for 12,7 mm installed width with screw-on assembly Page number KA 5632 AM KA 4932 AM Brief description Full-extension, detachable Over-extension, detachable Load capacity 45 kg 60 kg For drawer lengths mm mm Ball bearing slide systems for heavy loads KA 4620 KA 3320 KA 3550 Page number Brief description Over-extension for Full-extension for Over-extension for 19 mm installed width, detachable 19 mm installed width 24 mm installed width Load capacity 90 kg 136 kg kg For drawer lengths mm mm mm Accessories Page number Stop attachment/ bracket/front panel fitting Range summary of ball bearing slides

192 Part-extension for wooden drawers Ball bearing slide KA mm groove, load capacity 10 kg Precision partial-extension slide with pull-out stop and roll-out prevention Slide and ball race form a single inseparable unit Smooth action and high side stability through precision slide Arrow marking fitting direction Additional front support for drawers longer than 430 mm For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel Nominal Drawer Extension Hole spacing Cabinet Drawer slide Order no. PU length mm length loss mm rail mm mm EL mm b1 C mm /20 sets /20 sets /20 sets! /20 sets /20 sets /20 sets /20 sets Front support from 430 mm /20 sets /20 sets /20 sets /20 sets /20 sets 2 M4 x 9 screws are included in every set Cabinet front edge max. 13 M4x9 Drawer length ø3,5 ø6,3 17 8,5 8,5 C M4 EL 37 b1 Min. cabinet depth = drawer length + 1 = minimum number of screw-fixing positions Assembly ø3,5 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x ø 3,5 x ø 3,5 x M4 x Processing technology see group Ball bearing slides

193 Part-extension for wooden drawers Ball bearing slide KA mm groove, load capacity 12 kg Precision partial-extension slide with pull-out stop and roll-out prevention Slide and ball race form a single inseparable unit Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel Nominal Drawer Extension Hole spacing Cabinet Drawer Order no. PU length mm length loss mm rail slide mm mm EL mm b1 C mm /10 sets /10 sets 2 M4 x 9 screws are included in every set 13, , max. 13 M4x9 Drawer length C Cabinet front edge ø3,5 ø6, M4 ø3,5 ø6,3 37 EL b1 Min. cabinet depth = Drawer length + 1 = minimum number of screw-fixing positions Assembly Fixing screws Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x ø 3,5 x ø 3,5 x M4 x Processing technology see group 2 Ball-bearing slides

194 Over-extension for wooden drawers Ball bearing slide KA mm groove, load capacity 20 kg Precision full-extension slide with pull-out stop and roll-out prevention Slide and ball race form a single inseparable unit Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel Nominal Drawer Over-extension Hole spacing Cabinet rail Drawer Order no. PU length mm length OE mm mm mm slide mm mm b1 C /5 sets /5 sets /5 sets Cabinet front edge 2 M4 x 9 screws are included in every set Drawer length C 9 32 ø3,5 ø6,3 32 M4 OE 37 b1 Min. cabinet depth for drawer length 200 up to 249 = 250, for drawers longer than 250 = drawer length +1 max. 13 = minimum number of screw-fixing positions 27 13,5 13,5 M4x Assembly ø3,5 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x ø 3,5 x ø 3,5 x M4 x Processing technology see group Ball-bearing slides

195 Part-extension for wooden drawers Ball bearing slide KA ,7 mm installation width, load capacity 34 kg! Precision partial-extension slide with pull-out stop and roll-out prevention Using a release lever, the drawer can be detached from the slide and thus removed and re-fitted with ease. Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated Drawer Min. cabinet Extension Hole spacing mm Order no. PU length mm depth mm loss EL mm b1 b2 b3 C set set set set set set set set set set Cabinet front edge 37 Drawer length C ø4 ø6,3 Fix to drawer with at least 8 screws 2 EL 12, b1 b2 b3 17, ,5 ø4 Min. cabinet depth = minimum number of screw-fixing positions Assembly ø4 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x ø 4,0 x ø 4,0 x Processing technology see group 2 Ball-bearing slides

196 Full-extension for wooden drawers Ball bearing slide KA ,7 mm installation width, load capacity 30 kg! Precision full-extension slide with pull-out stop and roll-out prevention Using a release lever, the drawer can be detached from the slide and thus removed and re-fitted with ease. Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated Drawer Min. cabinet Hole spacing mm Order no. PU length mm depth mm b1 b2 b3 b4 C /10 sets /10 sets /10 sets /10 sets /10 sets Cabinet front edge 37 C Drawer length ø4 ø6,3 Fix to drawer with at least 8 screws b1 b2 b3 b4 Min. cabinet depth = minimum number of screw-fixing positions 12, ø4 Assembly ø4 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x ø 4,0 x ø 4,0 x Processing technology see group Ball bearing slides

197 Stop Control Full-extension for wooden drawers Ball bearing slide KA 5632 SC with self-closing facility 12,7 mm installation width, load capacity 40 kg! Precision full-extension slide the integrated self-closing feature reliably and automatically closes the drawer Using a release lever, the drawer can be detached from the slide and thus removed and re-fitted with ease. Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated or black Drawer Min. cabinet Hole spacing mm Order no. PU length mm depth mm b1 b2 b3 b4 C blue passivated black set set set set set set set set set! Cabinet front edge 37 C Drawer length ø4 ø6,3 Fix to drawer with at least 8 screws 12, b1 b2 b3 b4 Min. cabinet depth = minimum number of screw-fixing positions ø4 Assembly ø4 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x ø 4,0 x ø 4,0 x Processing technology see group 2 Ball bearing slides

198 Full-extension for wooden drawers Ball bearing slide KA ,7 mm installation width, load capacity 45 kg! Precision full-extension slide with pull-out stop and roll-out prevention Using a release lever, the drawer can be detached from the slide and thus removed and re-fitted with ease. Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated or black Drawer Min. cabinet Hole spacing mm Order no. PU length mm depth mm b1 b2 b3 b4 b5 C blue passivated black set set set set set set set set set set! Cabinet front edge 37 C Drawer length ø4 ø6,3 Fix to drawer with at least 8 screws 12, b1 b2 b3 b4 b5 Min. cabinet depth = minimum number of screw-fixing positions ø4 Assembly ø4 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x ø 4,0 x ø 4,0 x Ball bearing slide KA 5632 in conjunction with central locking Stop Control see group 6.1 Processing technology see group Ball bearing slides

199 Over-extension for wooden drawers Ball bearing slide KA ,7 mm installation width, load capacity 60 kg! Precision full-extension slide with pull-out stop and roll-out prevention Using a release lever, the drawer can be detached from the slide and thus removed and re-fitted with ease. Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated Drawer Min. cabinet Hole spacing mm Order no. PU length mm depth mm b1 b2 b3 b4 b5 C set set set set set set set set set set Cabinet front edge ø4 ø6,3 37 Drawer length C Fix to drawer with at least 8 screws b1 b2 b3 b4 b5 12,7 Min. cabinet depth = minimum number of screw-fixing positions ø4 Assembly ø4 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x ø 4,0 x ø 4,0 x Processing technology see group 2 Ball bearing slides

200 Full-extension for wooden drawers Ball bearing slide KA 5632 AM, overlay assembly 12,7 mm installation width, load capacity 45 kg! Precision full-extension slide with pull-out stop and roll-out prevention Overlay drawer assembly Using a release lever, the drawer can be detached from the slide and thus removed and re-fitted with ease. Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated Drawer Min. cabinet Hole spacing mm Order no. PU length mm depth mm b1 b2 b3 b4 C set set set set set set 37 C Drawer length Cabinet front edge ø4 ø6, b1 b2 b3 b4 Min. cabinet depth = minimum number of screw-fixing positions ,7 8,7 ø4 15 Assembly ø4 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x ø 4,0 x ø 4,0 x Processing technology see group Ball bearing slides

201 Over-extension for wooden drawers Ball bearing slide KA 4932 AM, overlay assembly 12,7 mm installation width, load capacity 60 kg! Precision full-extension slide with pull-out stop and roll-out prevention Overlay drawer assembly Using a release lever, the drawer can be detached from the slide and thus removed and re-fitted with ease. Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated Drawer Min. cabinet Hole spacing mm Order no. PU length mm depth mm b1 b2 b3 b4 C set set set set set set 37 C Drawer length Cabinet front edge ø4 ø6, b1 b2 b3 b4 = minimum number of screw-fixing positions Min. cabinet depth 25 12,7 8,7 ø4 Assembly ø4 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x ø 4,0 x ø 4,0 x Processing technology see group 2 Ball bearing slides

202 Over-extension for wooden drawers Ball bearing slide KA mm installation width, load capacity 90 kg! Precision full-extension slide with pull-out stop and roll-out prevention Using a release lever, the drawer can be detached from the slide and thus removed and re-fitted with ease. Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated Drawer length Min. cabinet depth Hole spacing mm Order no. PU mm mm b1 b2 C , set , set , set , set , set , set , set , set , set Cabinet front edge 34 Drawer length C ø4,5 ø6,3 Fix to drawer with at least 8 screws ø8,2 ø4,5 ø6, b1 b2 Min. cabinet depth = minimum number of screw-fixing positions 19 Assembly ø4,5 ø4,5 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x Processing technology see group Ball bearing slides

203 Full-extension for wooden drawers Ball bearing slide KA mm installation width, load capacity 136 kg Precision full-extension runner with push-in and pull-out stops Smooth action and high side stability through precision slide Slide and ball race form a single inseparable unit For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel Drawer length Min. cabinet depth Hole spacing mm Order no. PU mm mm b1 C ,0 217, set ,0 268, set ,5 319, set ,5 370, set ,0 421, set ,0 471, set ,0 522, set ,5 573, set ,5 624, set ,0 675, set ,0 725, set ,0 776, set ,5 827, set Cabinet front edge Drawer length 34 C ø5 Fix to drawer with at least 8 screws 5x 9,5 15 ø8 8x10 76 b1 76 Min. cabinet depth = minimum number of screw-fixing positions 19 +0,75 Assembly ø4,5 ø5 Processing technology see group 2 Ball bearing slides

204 Over-extension for wooden drawers Ball bearing slide KA mm installation width, load capacity kg! Precision over-extension slide with push-in and pull-out stops Smooth action and high side stability through precision slide Slide and ball race form a single inseparable unit For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated Drawer Min. cabinet Load Over-extension Hole spacing mm Order no. PU length mm depth mm capacity kg OE mm b1 b2 b3 C ,1 123,8-273, set ,9 123,8-323, set ,7 123,8-374, set ,6 88,9 123,8 425, set ,0 114,3 123,8 476, set ,4 139,7 123,8 527, set ,8 5,1 123,8 577, set ,2 190,5 123,8 628, set ,6 215,9 123,8 679, set Cabinet front edge Drawer length C ø4,5 ø6,3 Fix to drawer with at least screws 36,1 24+0,6 OE 111,1 b1 b2 b3 17 Min. cabinet depth = minimum number of screw-fixing positions 71,4 36,1 ø4,5 Assembly min.19 ø4,5 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x ø 6,3 x Processing technology see group Ball bearing slides

205 Accessories for ball bearing slides Stop attachment For 5 mm hole diameter Transparent plastic Stop attachment For 6 mm hole diameter Plastic ø8 ø8 1,5 7 ø6 Order no. PU /1000 1,5 5,5 ø5 Finish Order no. PU white /1000 brown /1000 beige /1000 Stop attachment ø 8 mm, self-adhesive Transparent plastic Bracket For fixing drawer bottoms and rear panels White plastic 10,7 15 4,7 Order no. PU Order no. PU /200 Front panel fitting For two-dimensional adjustment of fronts on 4-sided drawers For knocking into the drawer fronts White plastic ø5 ± ± ø20 10 Use ø 4 mm countersunk screws to fix the front panel fitting. Order no. PU /200 Screw length = frame thickness + 10 mm fitting thickness After adjustment, the front panel must be secured by means of one additional countersunk screw. Ball bearing slides

206 Range summary/technical comparison Roller runners i FR 302 FR 402 FR 602 Page number Brief description Part-extension Part-extension Part-extension Load capacity 20 kg 25 kg 35 kg For drawer lengths mm mm mm Page number FR FR Brief description Over-extension Part-extension Load capacity 50 kg kg For drawer lengths mm mm Page number Accessories Brief description Central locking/ spacer discs/distance rail/ stop attachment/bracket/front panel fitting Range summary of roller runners

207 Part-extension runner for wooden drawers Roller runner FR 302 Load capacity 20 kg With captive guide rail on one side For screw-on assembly Integrated self-closing feature, double stop and roll-out prevention Automatic tolerance compensation ± 1 mm Steel powder-coated white Drawer length Min. cabinet depth Extension loss Hole spacing mm Order no. PU mm mm EL mm b1 b2 b3 b /20 sets /20 sets /20 sets /20 sets /20 sets /20 sets Drawer length Cabinet front edge ø3,5 ø6,3 50 Cabinet front edge min.3,5 30 EL b1 b2 b3 b4 Min. cabinet depth = minimum number of screw-fixing positions Assembly min.2,5 min.1,5 up to 20 min. Double stop engages the extension in the front position 12,5 ±1 12, ø3,5 ø3,5 ø6,3 Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x ø 3,5 x ø 3,5 x Processing technology see group 2 Roller runners

208 Part-extension runner for wooden drawers Roller runner FR 402 Load capacity 25 kg With captive guide rail on one side For screw-on assembly Integrated self-closing feature, double stop and roll-out prevention Automatic tolerance compensation ± 1 mm Steel powder-coated white or brown Drawer Min. cabinet Extension loss Hole spacing mm Order no. PU length mm depth mm EL mm b1 b2 b3 b4 white brown /20 sets /20 sets /20 sets /20 sets /20 sets /20 sets /20 sets /20 sets 50 Cabinet front edge Drawer length Cabinet front edge ø3,5 ø6,3 min.3,5 30 min.2,5 min.1,5 up to 20 EL b1 b2 b3 b4 Min. cabinet depth = minimum number of screw-fixing positions Assembly min. Double stop engages the extension in the front position 12,5 ±1 12, ø3,5 ø3,5 ø6,3 Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x ø 3,5 x ø 3,5 x Processing technology see group Roller runners

209 Part-extension runner for wooden drawers Roller runner FR 602 Load capacity 35 kg With captive guide rail on one side For screw-on assembly Integrated self-closing feature, double stop and roll-out prevention Automatic tolerance compensation + 2 mm Steel powder-coated white or brown Drawer Min. cabinet Extension loss Hole spacing mm Order no. PU length mm depth mm EL mm b1 b2 b3 white brown /20 sets /20 sets /20 sets /20 sets /20 sets /20 sets /20 sets /20 sets /20 sets /20 sets /20 sets /20 sets 50 Cabinet front edge Drawer length Cabinet front edge ø3,5 ø6,3 min.3,5 30 min.2,5 up to 20 EL 9 min.1,5 min b1 b2 b3 Min. cabinet depth = minimum number of screw-fixing positions Assembly , ,5 33 Double stop engages the extension in the front position ø3,5 ø3,5 ø6,3 Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x ø 3,5 x ø 3,5 x Processing technology see group 2 Roller runners

210 Over-extension runner for wooden drawers Roller runner FR 6142 Load capacity 50 kg Two-sided captive guide rail For screw-on assembly Integrated self-closing feature Automatic tolerance compensation + 2 mm Steel powder-coated white or brown Safety catch and lockable centre runner Drawer Min. cabinet Over-extension Hole spacing mm Order no. PU length mm depth mm OE mm b1 b2 b3 b4 white brown /4 sets /4 sets /4 sets /4 sets /4 sets /4 sets /4 sets /4 sets /4 sets /4 sets /4 sets /4 sets Cabinet front edge ø3,5 ø6,3 50 Cabinet front edge Drawer length min.3, min.2,5 OE b1 b2 b3 b4 Min. cabinet depth min.1,5 = minimum number of screw-fixing positions Assembly 12, , min ø3,5 ø3,5 ø6,3 Centre runner Press safety catch into centre runner Dimensions mm Order no. PU ø 6,3 x 10, ø 6,3 x ø 3,5 x ø 3,5 x Processing technology see group Roller runners

211 Part-extension runner for wooden drawers Roller runner FR 1105 Load capacity kg For screw-on assembly Integrated self-closing feature, double stop and roll-out prevention Automatic tolerance compensation + 1 mm Steel, bright galvanised Drawer Min. cabinet Load capacity Extension loss Hole spacing mm Order no. PU length mm depth mm kg EL mm b1 b2 b3 b set set , set , set , set , set , set , set , set ,0 204, set , set , set , set Cabinet front edge Cabinet front edge Drawer length ø4 ø6,3 9 EL 34 b1 b2 b3 Min. cabinet depth = minimum number of screw-fixing positions b4 min. 20 Assembly 9 12,5 min , ,5 32 Double stop engages the extension in the front position ø4 ø4 ø6,3 Dimensions mm Order no. PU ø 6,3 x ø 6,3 x ø 4,0 x Processing technology see group 2 Roller runners

212 Accessories for roller runners Central locking Central locking system for wooden drawers with roller runner FR 302/402 or 602 Barrel Z23 see group 7 Article Order no. PU Locking bar with 5 adjustable pins Cylinder cam lock including rosette Anti-tilt block for wooden drawers / ,5 18,5 ø19 min Roller runner system FR 302/402/ X = min ø7 12,5 ±1 min. 128 X Roller runners

213 Accessories for roller runners Spacers/distance rail for side clearance For drawers positioned behind doors The spacers/distance rail bridge the door/hinge protrusion For larger clearances several discs can be clipped together White plastic Article Distance Order no. PU mm Spacers / / /100 Distance rail Roller runners

214 Accessories for roller runners Stop attachment For 5 mm hole diameter Transparent plastic Stop attachment For 6 mm hole diameter Plastic ø8 ø8 1,5 7 ø6 Order no. PU /1000 1,5 5,5 ø5 Finish Order no. PU white /1000 brown /1000 beige /1000 Stop attachment ø 8 mm, self-adhesive Transparent plastic Bracket For fixing drawer bottoms and rear panels White plastic 10,7 15 4,7 Order no. PU Order no. PU /200 Front panel fitting For two-dimensional adjustment of fronts on 4-sided drawers For knocking into the drawer fronts White plastic ø5 ± ± ø20 10 Use ø 4 mm countersunk screws to fix the front panel fitting. Order no. PU /200 Screw length = profile thickness + 10 mm fitting thickness After adjustment, the front panel must be secured by means of one additional countersunk screw Roller runners

215 i Range summary/technical comparison 5.5 Drawer runners for special applications Quadro for writing tables KA 3434 Keyboard tray Double-Ender Page number Brief description Part-extension with Part-extension with Full-extension for drawers locating catch locating catch which extend in both directions, with integrated dampened closure mechanism Load capacity 25 kg 20 kg 25 kg Runner lengths mm Quadro sliding panel Quadro sliding panel Pull-out system for pantry units Page number Brief description Part-extension Part-extension Full-extension with optional dampening Load capacity 40 kg 50 kg kg Runner lengths mm mm Summary of drawer runners for special applications 5.5.1

216 Partial-extension for writing tables Quadro 25 Load capacity 25 kg Integrated locating catch Push the shelf panel onto the rear hooks and screw through brackets at the front Galvanized steel Order no. PU set Example 1 Free space, e.g. for espagnolette lock 10 ø6 9,5 Cabinet front edge Min. installation depth Panel depth 84 Min. installation depth Panel depth 84 Example 2 Min. installation depth Panel depth 68 Assembly 27 min. 5 ø6 12 9,5 30,5 22 Locating catch ø3,5 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x ø 6,3 x ø 3,5 x ø 3,5 x Drawer runners for special applications

217 Partial-extension for keyboards Ball bearing runner KA 3434 Load capacity 20 kg Precision partial-extension runner with locating catch and roll-out prevention For keyboard trays, drawers and pull-outs Variable installation height 62,5 to 105,5 mm via 5 slot positions Galvanized steel, blue passivated! Nominal length Min. cabinet depth Extension loss Hole spacing mm Order no. PU mm mm EL mm b1 C ,0 108, set ,5 158, set ,5 184, set ,0 209, set ,0 260, set ,0 311, set Cabinet front edge b1 71,5 C EL 25 Nominal length ø4 Min. cabinet depth 40 25, ,5 ø4 105,5 95,5 84,5 73,5 62, ,5 ø4,5 14,5 Assembly Fixing screws 9, ø4 Dimensions mm Order no. PU ø 4 x Drawer runners for special applications 5.5.3

218 Full-extension for drawers which extend in both directions Double-Ender Load capacity 25 kg Face-mounted drawer fronts Integrated dampening system Silent System Drawer widths up to 900 mm Innovative drawer solution for serving hatches, connecting partitions or kitchen blocks Powder-coated steel, silver Depth mm Order no. PU set set set set set Cabinet hole positions X 96 ø5 x 12 X 96 Y 96 X T Y X LM 22 LH Depth mm T mm Y mm LM mm LH = min. 111/max. 240 X = (T Y 192) / 2 Drawer hole positions Z Z C OA 47 LH BH ø2x10 LH FH SA LM FB SA UA FB = LM + (2 x SA) FH = LH + OA + UA BH= UA + 50 C = min. 0,5/max. 3 Z = SA ST = = 11 LH = = 32 8,5 SB 1,5 ø5 x 12 SB = LM 77 SH = LH 23 ST = T + (2 x C) Y SH Drawer runners for special applications

219 Part-extension runner for sliding panels Quadro 40 Load capacity 40 kg For pull-out panels, sample walls and displays which are vertically mounted between two Quadro drawer runners Integrated pull-out stop Galvanized steel Order no. PU set Max. extension 5 Max. sliding panel depth 685 Min. sliding panel depth Cabinet front edge 260 Assembly note The extension loss of 189 mm can be reduced by 90 mm if the sliding panel is shortened by this amount at the back. The maximum installation depth is 595 mm in this case. Use M4 screws to fasten the sliding panel to the Quadro runners. M4 M Extension loss Cut off max. min Extension loss , ,5 + 0,3 H 14,5 + 0,3 18, Drawer runners for special applications 5.5.5

220 Part-extension runner for roll-out cabinets Quadro 50 Load capacity 50 kg For ceiling and/or floor assembly Suitable for roll-out cabinets in living areas and kitchens, or pharmacies and medical practices Mounting plates fixed with through-bolts Galvanized steel Roll-out runner Installation Hole spacing mm Order no. PU length mm a1 a2 a3 a4 a5 a Top guide rail Length Hole spacing mm Order no. PU mm b1 b2 b3 b Roller unit for upper guide rail Order no. PU Ceiling/floor assembly Floor assembly 56,5 45 M6 32 For optimal stability install a set of runners both at the top and bottom! (Load capacity 50 kg) 45 M Top guide rail Height adjustment via tolerance plate 56,5 32 Load capacity 75 kg Attention: Replace countersunk screws with ø 4.5 mm pan-head screws when using the height adjustment. Assembly accessories/drilling jigs, see group Drawer runners for special applications

221 Part-extension runner for roll-out cabinets Quadro 50 Load capacity 50 kg Ceiling/floor assembly Cabinet front edge a1 a2 a3 a6 a5 a4 90 Installation length M6 Floor assembly with top guide rail Installation length Cabinet front edge b1 b2 b3 44 b4 a6 a5 a a1 a2 a3 M6 Drawer runners for special applications 5.5.7

222 Differential full-extension for pantry units of wooden construction Load capacity kg For flexible widths (from 110 mm) and heights Automatic top guide tolerance compensation Optional dampening Silent System Steel, white, zinc-plated from 600 mm length Length Min. cabinet depth Load capacity Order no. PU mm mm kg Dampened closure Silent System Assembly Assembly of top cabinet rail/ Dampened closure Silent System Min. cabinet depth Assembly of top extension rail A B C Assembly of bottom extension rail 88 ø6 Through-holes 56, D E F Assembly of bottom cabinet rail G 30 Drawer bottom must be reinforced for attaching the pull-out! Length Hole spacing mm mm A B C D E F G Drawer runners for special applications

223 i General information pertaining to drawer and runner systems Range of application Hettich drawer and runner systems are suitable for domestic and commercial furniture applications in living and bed rooms, kitchens, bathrooms and offices. Load Capacity and pull-out prevention The load capacity (according to DIN EN 15338) shown in the catalogue refers to the empty weight of the drawer including contents in kg. All Hettich drawer systems have a lift-up and pull-out prevention and meet the requirements of the stop position within a test frame according to DIN EN Depending on the appropriate installation the drawer and runner systems are suitable for furniture according to DIN The maximum drawer front height depends in particular on the material, the drawer measurements and the runner system. For further information please contact your Hettich representative. Corrosion testing Hettich drawer and runner systems meet corrosion requirements according to DIN EN 15338, 72 hour condensation water testing according to EN Additional information Using a chipboard quality - with reference to the screw pull-out resistance according to DIN EN 320 (>1.000 N) we recommend an installation with screws according to the attachment illustrations in the catalogue. Modes of attachment which diverge from the specification need to be verified by the furniture manufacturer

224 Range summary/technical comparison 5.6 Table extension slides i Table extension slides for frame profiles Trimanis Basic Trimanis Advanced Trimanis Alu square Page number Installation length 700/1350 mm 850/1350 mm 1310/60 mm Number of extension leaves 1/2 1/2 1/2 Width of extension leaf max. 500 mm max. 500 mm max. 600/500 mm Load capacity max. 60/90 kg max. 60 kg max. 90 kg Material galvanized steel galvanized steel aluminium silver/dark anodised Table extension slides for tables with fixed lower frame Page number Trimanis Combi Trimanis Combi Alu Installation length 720/980/1200/1500 mm 980/1200 mm Number of extension leaves 2/3/4/5 3/4 Width of extension leaf max. 500 mm max. 500 mm Load capacity max. 90/100 kg max. 100 kg Material galvanized steel aluminium silver anodised Range summary of table extension slides

225 i Range summary/technical comparison 5.6 Table extension slides Table extension slides for tables with extension to one side Trimanis Frontslide Trimanis Frontslide Alu square Trimanis Frontslide Alu Page number Installation length 1300/1800 mm 1200/1800 mm 1315/1815 mm Number of extension leaves 2 1/2 2 Width of extension leaf max. 500 mm max. 600/500 mm max. 500 mm Load capacity max. 90 kg max. 90 kg max. 90 kg Material galvanized steel aluminium silver/dark anodised aluminium silver anodised Table extension slides Folding leaf fitting Page number Trimanis Classic Installation length 450/740/650 mm - Number of extension leaves 1/2/3/4 1 Width of extension leaf max. 600/500 mm max. 500/600 mm Load capacity max. 60/90 kg - Material galvanized steel galvanized steel Accessories Corner bracket/reinforcing bar/ plate with support pin Page Range summary of table extension slides 5.6.1

226 Table extension slide for frame profiles Trimanis Basic Table extension slide for 1 extension leaf with max. leaf width of 500 mm For installation in open frame systems With synchronized control: for simultaneously opening and closing both table tops (only Trimanis Basic synchron) Installation length 700 mm Max. load capacity 60 kg Can be combined with folding leaf fitting, see page Galvanized steel 31 ±0,5 40 ±0,5 Set contains: 1 pair of table extension slides, standard or synchronous 8 dowels/bushes 4 locking hooks 13,5 ±0,5 Article Order no. PU Trimanis Basic standard set Trimanis Basic synchron set ø5,1 ø5,1 ø7,5 y 500 min. 600 min extension leaf y x 500 mm! Table extension slides

227 Table extension slide for frame profiles Trimanis Basic Table extension slide for 2 extension leaves with max. leaf width of 500 mm For installation in open frame systems With synchronized control: for simultaneously opening and closing both table tops (only Trimanis Basic synchron) Integrated rope brake (only Trimanis Basic synchron) Installation length 1350 mm Max. load capacity 90 kg Galvanized steel 36 ±0,5 49 ±0,5 Set contains: 1 pair of table extension slides, standard or synchronous 12 dowels/bushes 6 tension jacks (only Trimanis Basic standard) Article Order no. PU Trimanis Basic standard set Trimanis Basic synchron set x 55 ø5,1 y 500 min. 10 min extension leaves y x 500 mm Table extension slides 5.6.3

228 Table extension slide for frame profiles Trimanis Advanced Table extension slide for 1 extension leaf with max. leaf width of 500 mm For installation in closed frame systems With synchronized control (for simultaneously opening and closing both table tops) Integrated rope brake Installation length 850 mm Max. load capacity 60 kg Can be combined with folding leaf fitting, see page Galvanized steel Set contains: 1 pair of table extension slides 8 dowels/bushes 36,6 ±0, ±0,5 Order no. PU set x ø5, y 500 min extension leaf y x 500 mm Table extension slides

229 Table extension slide for frame profiles Trimanis Advanced Table extension slide for 2 extension leaves with max. leaf width of 500 mm For installation in closed frame systems With synchronized control (for simultaneously opening and closing both table tops) Integrated rope brake Installation length 1350 mm Max. load capacity 60 kg Can be combined with folding leaf fitting, see page Galvanized steel Set contains: 1 pair of table extension slides 12 dowels/bushes 36,6 ±0,5 49 ±0,5 Order no. PU set x ø5, y 500 min. 10 min extension leaves y x 500 mm Table extension slides 5.6.5

230 Table extension slide for frame profiles Trimanis Alu square High-quality aluminium table extension slide for one or two extension leaves with a leaf width of max. 600/500 mm Table extension slide acts as frame profile With synchronized control: for simultaneously opening and closing both table tops Integrated rope brake 58,5 Max. load capacity 90 kg ±0,5 Anodised aluminium ±0,3 52 M8 Set contains: 1 pair of table extension slides 8 or 12 dowels/bushes 28 Installation length Number of extension leaves Width of extension leaves Order no./finish PU mm mm silver anodised dark anodised set set Installation length 1310 mm 10 ø ø14 ø10 ø6, min. 10 Installation length 60 mm 10 min extension leaf y x 600 mm 27 ø ø14 ø10 ø6, min. 10 min extension leaves y x 500 mm Table extension slides

231 Table extension slide for tables with fixed lower frame Trimanis Combi Table extension slide for 2 extension leaves with max. leaf width of 500 mm Installation length 720 mm Integrated rope brake Max. load capacity 90 kg Galvanized steel 81 ±0,5 Set contains: 1 pair of table extension slides 12 dowels/bushes 57 Order no. PU set ø5,1 7x y 500 min. 10 min extension leaves y x 500 mm Table extension slides 5.6.7

232 Table extension slide for tables with fixed lower frame Trimanis Combi Table extension slide for 3 extension leaves with max. leaf width of 500 mm Installation length 980 mm Integrated rope brake Max. load capacity 90 kg Galvanized steel 81 ±0,5 Set contains: 1 pair of table extension slides dowels/bushes 73 Order no. PU set ø5,1 7x y 500 min. 10 min extension leaves y x 500 mm Table extension slides

233 Table extension slide for tables with fixed lower frame Trimanis Combi Table extension slide for 4 or 5 extension leaves with max. leaf width of 500 mm Integrated rope brake Max. load capacity 100 kg Galvanized steel 87,4 ±0,5 Set contains: 1 pair of table extension slides 20 or 24 dowels/bushes 82 Installation length mm Number of extension leaves Order no. PU set set Installation length 1200 mm ø5,1 7x y 500 min. 10 min extension leaves y x 500 mm Installation length 1500 mm ø5,1 7x y 500 min. 10 min extension leaves y x 500 mm Table extension slides 5.6.9

234 Table extension slide for tables with fixed lower frame Trimanis Combi Alu High-quality aluminium table extension slide for three or four extension leaves with a leaf width of max. 500 mm Integrated rope brake Max. load capacity 100 kg Aluminium silver anodised 88,5 ±0,5 Set contains: 1 pair of table extension slides or 20 dowels/bushes 82 Installation length mm Number of extension leaves Order no. PU set set Installation length 980 mm 4x ø5, y 500 min. 10 Installation length 1200 mm min extension leaves y x 500 mm 5x ø5, y 500 min. 10 min extension leaves y x 500 mm Table extension slides

235 Table extension slide for tables with extension to one side Trimanis Frontslide Table extension slide for 2 extension leaves with max. leaf width of 500 mm Integrated rope brake Max. load capacity 90 kg Galvanized steel 41 ±0,5 Set contains: 1 pair of table extension slides 12 dowels/bushes 74,5 ±0,5 Installation length mm Order no. PU set set Installation length 1300 mm ø5, , Installation length 1800 mm ø5, x ,5 30 y 500 min extension leaves y x 500 mm Table extension slides

236 Table extension slide for tables with extension to one side Trimanis Frontslide Alu square High-quality aluminium table extension slide for one or two extension leaves with a leaf width of max. 600/500 mm Can optionally be combined with Trimanis 2-leg frames With premounted angle connector Table extension slide acts as frame profile Integrated rope brake Max. load capacity 90 kg Anodised aluminium Set contains: 1 pair of table extension slides 8 or 12 dowels/bushes Installation length Number of extension leaves Width of extension leaves Order no./finish PU mm mm silver anodised dark anodised set set 100 5x200 ø5,3 Installation length 1200 mm 9, x200 ø5,3 Installation length 1800 mm 9, ø5, ,5 ø8 600/ ,5 43, Table extension slides

237 Accessories for Trimanis Frontslide Alu Square Trimanis 2-leg frame High-quality aluminium frame with 2 legs Can be combined with Trimanis Frontslide Alu Anodised aluminium Set contains: 2 pcs 2-leg frames Fixing accessories Finish Order no. PU silver anodised set dark anodised set 1200 / x Table extension slides

238 Table extension slide for tables with extension to one side Trimanis Frontslide Alu High-quality aluminium table extension slide for two extension leaves with a leaf width of max. 500 mm Table extension slide acts as frame profile Integrated rope brake Max. load capacity 90 kg Aluminium silver anodised 88 ±0,5 Set contains: 1 pair of table extension slides 12 dowels/bushes 73,2 Installation length mm Order no. PU set set Installation length 1315 mm 5x ø4, Installation length 1815 mm 5x ø4, y 500 min. 10 min extension leaves y x 500 mm Table extension slides

239 Table extension slide for single telescopic extension Trimanis Classic Table extension slide for 1 extension leaf with max. leaf width of 600 mm For tables without frame structure Installation length 450 mm Max. load capacity 60 kg Galvanized steel 71 ±0,5 Set contains: 1 pair of table extension slides 8 dowels/bushes 4 tension jacks 40 ±0,5 Order no. PU set ø7,5 ø5,1 450 Table extension slides

240 Table extension slide for multiple telescopic extension Trimanis Classic Table extension slide for 2 extension leaves with max. leaf width of 500 mm For tables without frame structure Installation length 740 mm Max. load capacity 60 kg Galvanized steel 72 ±0,5 Set contains: 1 pair of table extension slides 12 dowels/bushes 6 tension jacks 1,50 50,5 ±0,5 Order no. PU set 20 7x55 ø5, Table extension slides

241 Table extension slide for multiple telescopic extension Trimanis Classic Table extension slide for 3 extension leaves with max. leaf width of 500 mm For tables without frame structure Installation length 740 mm Max. load capacity 90 kg Can optionally be combined with supporting leg Galvanized steel 86 ±0,5 Set contains: 1 pair of table extension slides dowels/bushes 8 tension jacks 1,5 50,5 ±0,5 Order no. PU set Trimanis supporting leg Leg for central support of the table extension slide Secured to the table extension slide ø19 M6 x 6 Order no. PU x Table extension slides

242 Table extension slide for multiple telescopic extension Trimanis Classic Trimanis Classic Table extension slide for 4 extension leaves with max. leaf width of 500 mm For tables without frame structure Installation length 650 mm Max. load capacity 90 kg Can optionally be combined with supporting leg Galvanized steel 100 ±0,5 Set contains: 1 pair of table extension slides 20 dowels/bushes 10 tension jacks 1,5 ±0,5 50,5 Order no. PU set Trimanis supporting leg Leg for central support of the table extension slide Secured to the table extension slide ø19 M6 x 6 Order no. PU x Table extension slides

243 Accessories for table extension slide Trimanis Folding leaf fittings Retractable, for extension leaves with a width of 500 mm For use in combination with table extension slides with closed frame system or central leg Galvanized steel Set contains: 2 stop plates for extension leaf 2 bearings for turn bar 1 turn bar with closed frame system or central leg Order no. PU set Functional principle Retractable, for inlaid panels with a width of mm For use in combination with table extension slides with open frame system Galvanized steel, yellow passivated Set contains: 2 stop plates for inlaid panel left/right 2 rod bearings left/right Order no. PU set Functional principle Table extension slides

244 Accessories for table extension slides Trimanis Corner bracket For connecting table leg and table frame profile Galvanized steel 8,5 15,6 11,3! 11, , ca Height x Depth mm Order no. PU 40 x x x Reinforcing bar for solid wood panels Application: to prevent warpage of thick, solid table tops Length: 700 mm Width: 40 mm Height: 20 mm Grey steel Order no. PU Plate with support pin For assembly of the extension leaf Chromated steel Order no PU 5,5 5,5 27 ø5,3 2, Table extension slides