HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 12 / A / 551 / 0911 / E
|
|
|
- Carol Gilmore
- 5 years ago
- Views:
Transcription
1 HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 12 / A / 551 / 0911 / E Speed-up and Splitter Gearboxes
2 Contents General Information 4-5 Speed-up Gearboxes Series kw 6-7 Speed-up Gearboxes Series kw 8-9 Speed-up Gearboxes Series (through-shaft) - 20 kw Speed-up Gearboxes Series kw Speed-up Gearboxes Series 7012 (cast-iron housing) - 37 kw Speed-up Gearboxes Series (MLT 3,5) (cast-iron housing) - 40 kw Speed-up Gearboxes Series (cast-iron housing) - 68 kw Speed-up Gearboxes Series (cast-iron housing) - 68 kw Splitter Gearboxes Series kw Splitter Gearboxes Series kw Splitter Gearboxes Series kw Pump Flanges for Gearboxes Series Pump Flanges for Gearboxes Series HT 12 / A / 551 / 0911 / E Pag. 3
3 General Information Speed-up and Splitter Gearboxes They are used for installing hydraulic pumps on the farm tractor power take-off. Max. output speed of the power take-off is 1000 n/min. which can be modified to the proper running speed of the hydraulic pump. Different input speed can also be suitable, provided that the output speed is not higher than 3000 n/min. GEARBOX: Made in alluminium alloy or cast iron with high mechanical resistance. GEARS: In compliance with ISO - DIN standard. Made in treated steel UNI 18 PCR Mo 3 with properly shaved teeth. Stub teeth guarantee high resistance and low noise. SHAFT: Made in treated steel UNI 16 Cr Ni 4 and key coupled with gears. They are coupled with gears via splined parts and are thus more suitable to transmit the torque stated in the catalogue. TORQUE: The torque mentioned in the technical charts refer to continuous duty. For intermittent duty the torque may be higher by 20%. LUBRICATION: Use oil SAE 90 to ensure proper running and long life of the unit. Check the oil level via the level gauge every 1500 hours. Carry out first oil change after working hours. WORKING TEMPERATURE: The working temperature should not exceed 120 C under continuous duty. HYDRAULIC PUMP INSTALLATION: The installation of the hydraulic pumps on the gearboxes require a coupling sleeve and adapter flange according to the specific requirements. When ordering please specify pump flange and shaft type. Please contact our Tech. Dpt. for special components with working characteristics not mentioned in this catalogue. Pag. 4 HT 12 / A / 551 / 0911 / E
4 General Information Speed-up and Splitter Gearboxes Product Overview Gearbox Series Power kw Pump group Housing Gr. 2 Aluminium Gr. 3 Aluminium through shaft 20 Gr. 3 Aluminium Splitter Speed-up Gr. 3,5 Aluminium Gr. 3 Cast Iron (MTL 3,5) 40 Gr. 3,5 Cast Iron SAE A - B Cast Iron Gr. 2-3 Cast Iron Gr. 2-3 Aluminium Gr. 3-3,5 Aluminium Gr. 4 Aluminium HT 12 / A / 551 / 0911 / E Pag. 5
5 Speed-up Gearboxes Series kw Outlet pump flange Gr. 2 INSTALLATION DRAWING Pag. 6 HT 12 / A / 551 / 0911 / E
6 Speed-up Gearboxes Series kw Outlet pump flange Gr. 2 ORDER CODE Flanges: see page 28 Speed-Up Gearbox Series Outlet pump flange Gr. 2 Special versions Gear Ratio N2 / N1 Inlet shaft 1 - Male shaft A SAE 1-3/8 2 - Long Female shaft A SAE 1-3/8 3 - Short Female shaft A SAE 1-3/8 4 - Quick Coupling Female shaft A SAE 1-3/8 Code - Ratio Shaft ,5 x x x x 2-2 x x x x 3-2,5 x x x x 4-3 x x x x 5-3,5 x x x x 6-3,8 x x x x blank - not available x - Available SPARE PARTS LIST HT 12 / A / 551 / 0911 / E Pag. 7
7 Speed-up Gearboxes Series kw Outlet pump flange Gr. 3 INSTALLATION DRAWING Pag. 8 HT 12 / A / 551 / 0911 / E
8 Speed-up Gearboxes Series kw Outlet pump flange Gr. 3 ORDER CODE Flanges: see page 28 Speed-Up Gearbox Series Outlet pump flange Gr. 3 Special versions Gear Ratio N2 / N1 Inlet shaft 1 - Male shaft A SAE 1-3/8 2 - Long Female shaft A SAE 1-3/8 3 - Short Female shaft A SAE 1-3/8 4 - Quick Coupling Female shaft A SAE 1-3/8 Code - Ratio Shaft x 1-1,5 x x x x 2-2 x x x x 3-2,5 x x x x 4-3 x x x x 5-3,5 x x x x 6-3,8 x x x x blank - not available x - Available SPARE PARTS LIST HT 12 / A / 551 / 0911 / E Pag. 9
9 Speed-up Gearboxes Series through shaft -20 kw Outlet pump flange Gr. 3 INSTALLATION DRAWING Pag. 10 HT 12 / A / 551 / 0911 / E
10 Speed-up Gearboxes Series through shaft-20 kw Outlet pump flange Gr. 3 ORDER CODE Speed-Up Gearbox Series Through-shaft Outlet pump flange Gr. 3 Flanges: see page 28 Special versions Gear Ratio N2 / N1 Through shaft 5 - Male-Long Female shaft A SAE 1-3/8 6 - Long Female-Long Female shaft A SAE 1-3/8 7 - Male-Male shaft A SAE 1-3/8 8 - Male-Quick Coupling shaft A SAE 1-3/8 9 - Short Female-Short Female shaft A SAE 1-3/8 11- Male-Short Female shaft A SAE 1-3/8 Code - Ratio Shaft ,5 x x x 2-2 x x x x x 3-2,5 x x x x 4-3 x x x x x x 5-3,5 x x x x x x 6-3,8 x x x x x x blank - not available x - Available SPARE PARTS LIST HT 12 / A / 551 / 0911 / E Pag. 11
11 Speed-up Gearboxes Series kw INSTALLATION DRAWING Pag. 12 HT 12 / A / 551 / 0911 / E
12 Speed-up Gearboxes Series kw ORDER CODE Flanges: see page 29 Special versions Speed-Up Gearbox Series Inlet shaft 1 - Male shaft A SAE 1-3/8 2 - Long Female shaft A SAE 1-3/8 3 - Quick Coupling Female shaft A SAE 1-3/8 Gear Ratio N2 / N1 Code - Ratio Shaft x x x 2-1,5 x x x 3-2 x x x 4-2,5 x x x 5-3 x x x 6-3,5 x x x 7-3,8 x x x 8-4 x x x 9-4,8 x x x blank - not available x - Available SPARE PARTS LIST HT 12 / A / 551 / 0911 / E Pag. 13
13 Speed-up Gearboxes Series Cast iron housing - 37 kw Outlet pump flange Gr.3 INSTALLATION DRAWING Pag. 14 HT 12 / A / 551 / 0911 / E
14 Speed-up Gearboxes Series Cast iron housing - 37 kw Outlet pump flange Gr. 3 ORDER CODE Flanges: see page 28 Speed-Up Gearbox Series Outlet pump flange Gr. 3 Cast Iron Housing Special versions Gear Ratio N2 / N1 Inlet shaft 12 - Male shaft A SAE 1-3/ Female shaft A SAE 1-3/ Quick Coupling Female shaft A SAE 1-3/8 Code - Ratio Shaft x 1-1,5 x x x 2-2 x x x 3-2,5 x x x 4-3 x x x 5-3,5 x x x 6-3,8 x x x blank - not available x - Available SPARE PARTS LIST HT 12 / A / 551 / 0911 / E Pag. 15
15 Speed-up Gearboxes Series (MTL 3,5) - Cast iron housing - 40 kw Outlet pump flange Gr. 3,5 INSTALLATION DRAWING Pag. 16 HT 12 / A / 551 / 0911 / E
16 Speed-up Gearboxes Series (MTL 3,5) - Cast iron housing - 40 kw Outlet pump flange Gr. 3,5 ORDER CODE Speed-Up Gearbox Series (MTL 3,5) Outlet pump flange Gr 3,5 - Gr 3 Cast Iron Housing Gear Ratio N2 / N1 Special versions Inlet shaft 1 - Male shaft A SAE 1-3/8 2 - Female Shaft SAE 1-3/8 3 - Quick coupling female shaft SAE 1-3/8 Code - Ratio Shaft x 2-2,5 x 3-3,1 x x x 5-3,7 x x x blank - not available x - Available SPARE PARTS LIST HT 12 / A / 551 / 0911 / E Pag. 17
17 Speed-up Gearboxes Series Cast iron housing - 68 kw Outlet pump flange SAE A - SAE B INSTALLATION DRAWING Pag. 18 HT 12 / A / 551 / 0911 / E
18 Speed-up Gearboxes Series Cast iron housing - 68 kw Outlet pump flange SAE A - SAE B ORDER CODE Speed-Up Gearbox Series Outlet pump flange SAE A - SAE B Cast Iron Housing Inlet shaft 1 - Male shaft SAE 1-3/8 Gear Ratio N2 / N1 Code - Ratio 6-3,5 7-3,8 Special versions SPARE PARTS LIST HT 12 / A / 551 / 0911 / E Pag. 19
19 Speed-up Gearboxes Series Cast iron housing - 68 kw Outlet pump flange Gr. 2 - Gr. 3 INSTALLATION DRAWING Pag. 20 HT 12 / A / 551 / 0911 / E
20 Speed-up Gearboxes Series Cast iron housing - 68 kw Outlet pump flange Gr. 2 - Gr. 3 ORDER CODE Speed-Up Gearbox Series Outlet pump flange Gr 2 - Gr 3 Cast Iron Housing Special versions Inlet shaft 1 - Male shaft SAE 1-3/8 Gear Ratio N2 / N1 Code - Ratio 6-3,5 SPARE PARTS LIST HT 12 / A / 551 / 0911 / E Pag. 21
21 Splitter Gearboxes Series kw Outlet pump flange Gr. 2-3 INSTALLATION DRAWING Speed-up and Splitter Gearboxes Pag. 22 HT 12 / A / 551 / 0911 / E
22 Splitter Gearboxes Series kw Outlet pump flange Gr. 2-3 ORDER CODE Flanges: see page 28 Splitter Gearbox Series Outlet pump flange Gr. 2-3 Special versions Gear Ratio N 2 / N 1 Inlet shaft 1 - Male shaft A SAE 1-3/8 2 - Long Female shaft A SAE 1-3/8 3 - Quick Coupling Female shaft A SAE 1-3/8 Code - Ratio Shaft x x x 2-1,5 x x x 3-2 x x x 4-2,5 x x x 5-3 x x x 6-3,5 x x x 7-3,8 x x x blank - not available x - Available SPARE PARTS LIST HT 12 / A / 551 / 0911 / E Pag. 23
23 Splitter Gearboxes Series kw Outlet pump flange Gr. 3-3,5 INSTALLATION DRAWING Speed-up and Splitter Gearboxes Pag. 24 HT 12 / A / 551 / 0911 / E
24 Splitter Gearboxes Series kw Outlet pump flange Gr. 3-3,5 ORDER CODE Flanges: see page 29 Splitter Gearbox Series Outlet pump flange Gr. 3-3,5 Special versions Gear Ratio N 2 / N 1 Inlet shaft 1 - Male shaft SAE 1-3/8 2 - Long Female shaft SAE 1-3/8 3 - Quick Coupling Female shaft SAE 1-3/8 5 - Male shaft DIN 5282 Code - Ratio Shaft x x x x 2-1,5 x x x x 3-2 x x x x 4-2,5 x x x x 5-3 x x x x 6-3,5 x x x x 7-3,8 x x x x 8-4 x x x x 9-4,8 x x x x blank - not available x - Available SPARE PARTS LIST HT 12 / A / 551 / 0911 / E Pag. 25
25 Splitter Gearboxes Series kw Outlet pump flange Gr. 4 INSTALLATION DRAWING Speed-up and Splitter Gearboxes Pag. 26 HT 12 / A / 551 / 0911 / E
26 Splitter Gearboxes Series kw Outlet pump flange Gr. 4 ORDER CODE Flanges: see page 29 Splitter Gearbox Series Outlet pump flange Gr. 4 Special versions Gear Ratio N 2 / N 1 Inlet shaft 1 - Male shaft SAE 1-3/8 2 - Long Female shaft SAE 1-3/8 3 - Male shaft DIN 5482 Code - Ratio Shaft x x x 2-1,5 x x x 3-2 x x x 4-2,5 x x x 5-3 x x x 6-3,5 x x x 7-3,8 x x x blank - not available x - Available SPARE PARTS LIST HT 12 / A / 551 / 0911 / E Pag. 27
27 FLANGES for SPEED-UP and SPLITTER GEARBOXES Series Speed-up and Splitter Gearboxes Pag. 28 HT 12 / A / 551 / 0911 / E
28 FLANGES for SPEED-UP and SPLITTER GEARBOXES Series Speed-up and Splitter Gearboxes HT 12 / A / 551 / 0911 / E Pag. 29
29 As HANSA-TMP has a very extensive range of products and some products have a variety of applications, the information supplied may often only apply to specific situations. If the catalogue does not supply all the information required, please contact HANSA-TMP. In order to provide a comprehensive reply to queries we may require specific data regarding the proposed application. Whilst every reasonable endeavour has been made to ensure accuracy, this publication cannot be considered to represent part of any contract, whether expressed or implied. HANSA-TMP reserves the right to amend specifications at their discretion.
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 12 / A / 452 / 1212 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Electromagnetic Clutches Contents General Information... 4-5 Electromagnetic Clutches - 3 danm Series 30900-1 30900-2... Series 30900-1N
TMF 500. Fixed Displacement Axial Piston Motor for Open and Closed Loop System MANUFACTURING THE PRODUCTION LINE OF HANSA-TMP
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES MANUFACTURING THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 /
TPV Variable Displacement Closed Loop System Axial Piston Pump MANUFACTURING THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 403 / 1110 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
TPV 4000 (EX 28-41) Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE TRANSMISSION LINE OF HANSA-TMP HT 16 / M / 280 / 1008 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
TPV 1000 (Ex 6-18) Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 109 / 1008 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
Fixed Displacement Bent Axis Axial Piston Pumps TPB 70 - TAP 70
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC
Variable Displacement Open Loop Circuit Axial Piston Pumps AR Series
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 59 415 711 Fax: +39 59 415 729 / 59 415 73 INTERNET: http://www.hansatmp.it E-MAIL:
TPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
TPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 114 / 0814 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
TPVT 1200 BTB. Variable Displacement Axial Piston Pumps CONTENTS. General Information. Installation Instructions. Technical Specifications 6-7
CONTENTS General Information Installation Instructions Technical Specifications Tandem Pump Installation Drawings Hydraulic Diagrams Rear Pump Mounting Flanges Mounting Shaft and Shaft Details Control
Slewing Rings HT 2100 / A / 102 / 0609 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES
YDRAULIC COMPONENTS YDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 x: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
TPF 60 (36,16 49,94 cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
TPV Variable Displacement Axial Piston Pumps CONTENTS. General Information. Installation Instructions. Technical Specifications 6-7
CONTENTS General Information Installation Instructions Technical Specifications Single Pump Installation Drawing Tandem Pump Installation Drawing Mounting Flanges and Shaft Details Rear Pump Mounting Flanges
TMF 600 ( cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
Variable Displacement Open Loop Circuit Axial Piston Pumps. V Series
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 59 415 711 Fax: +39 59 415 729 / 59 415 73 INTERNET: http://www.hansatmp.it E-MAIL:
TPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 851 / 0813 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES THE PRODUCTION LINE OF HANSA-TMP Variable Displacement Closed Loop System CONTENTS General Information... Order Code... Manual Control
P.T.O. GEARBOXES Technical Catalogue October 2017
GEARBOXES Technical Catalogue October 7 web edition Gearboxes Table of contents Introduction... ML Speed increaser gearbox for pumps GR. with European unified flange... ML5 Speed increaser gearbox for
Fixed Displacement Bent Axis Axial Piston Motors TMB 700
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC
TPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
TPV 1200 BTB. Variable Displacement Closed Loop System Axial Piston Compact Tandem Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 154 / 0413 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified ISO 9001 and 14001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 TERNET:
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 14 / A / 103 / 0309 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 14 / A / 103 / 0309 / E Pump Drives - Gearboxes Mechanical Dry Clutches Hydraulic Clutches Pump Adaptors CONTENTS Pump Drives AM
ISO Certificate N 12-E TIC. ISO 9001 Certificate N 12-Q TIC
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Certificate N 12-Q-0200545-TIC ISO 14001 Certificate N 12-E-0200545-TIC Via M. L. King,
High Torque Geared Motors GB
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
Brochure Hydraulic Pumps, Hydraulic Parts
www.hidrocel.com.tr 2013 Brochure Hydraulic s, Hydraulic Parts Product Group Bent Axis s Piston s PBA s 2PBA s PBX s Gear s PA s PH s Power Take Off HDP s PTO Adapter, Valve, Cardan Shaft www.hidrocel.com.tr
Veljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
Hydraulic gear pumps and motors
PL 01 T E DISPLACEMENTS From To Hydraulic gear pumps and motors 0.07 in 3 /rev (1.07 cm 3 /rev) 5.56 in 3 /rev (91.10 cm 3 /rev) through bore aluminum body PRESSURE Max. Continuous Max. Intermittent Max.
Veljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
Gear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
![Gear Housing Widths 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Gear Housing Widths / Flow Rate [ VGP - D Series ]](/thumbs/76/74105930.jpg "Gear Housing Widths 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Gear Housing Widths / Flow Rate [ VGP - D Series ]")
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
Displacement. (cc/rev) Tap Water Sea Water PC PV
J anus Pumps - Axial Piston Totally oil free, clean and completely safe for people, processes and products. As a result of employing advanced materials, high velocity and loaded sliding surfaces can operate
TPV 1200 BTB. Variable Displacement Closed Loop System Axial Piston Compact Tandem Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 160 / 0516 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
Engineering Product & System Guide
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
HDP Series. Hydraulic Gear Pumps. high performance, custom design, low noise emission, high efficiency...
HDP Series Hydraulic Gear s high performance, custom design, low noise emission, high efficiency... www.hidrocel.com.tr 1 Contents Design of HDP s Range and characteristics HDP 3/61 ISO HDP 3/61 UNI HDP
AP212 Gear Pumps. Standard and Low Noise series. Reference: 200-P EN-03 1/60. Issue:
Gear Pumps Standard and Low Noise series Reference: 2-P-99123-EN-3 Issue: 9.215 1/6 Contents Page 1 General information... 4 1.1 External gear pumps components... 5 1.2 Example of typical sound pressure
High-Pressure Fixed Displacement Radial Piston Pumps PR Series
HYDRULIC COMONENTS HYDROSTTIC TRNSMISSIONS GERBOXES - CCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODEN (ITLY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET:
Low Speed High Torque Motors
Low Speed High Torque Motors Catalogue HY29-0503/UK TABLE OF CONTENTS Table of contents Features General information Functional description Technical data 3 4 4 5 6 FRAME SIZE P Operating diagrams Overall
GEAR PUMPS DIMENSIONAL DETAILS
DIMENSIONAL DETAILS OUTLET INLET TYPE DISPLACEMENT CM 3 /REV FLOW AT 1500 REV/MIN MAX. WORKING PRESSURE MAX. SPEED DIMENSIONS MM P1 P2 P3 RPM L M D2 1.4 2.0 270 290 310 6000 40 79 D3 2.1 2.9 270 290 310
Spiral Bevel Gearboxes Type BG. General. 1. Construction Features. 2. Lubrication
Spiral Bevel Gearboxes Type BG General Spiral bevel gearboxes BG incorporate the most modern advances in bevel gearbox design and construction. These gearboxes offer an extensive range of ratios together
HIGH PRESSURE - pumps
Gear pumps TRAE Positive displacement, external gear pumps intended for hydraulic systems of machines and devices. Material Housing Aluminium Mounting plate Aluminium (groups 1 and 2), cast iron (group
THE PRODUCTION LINE OF PONAR WADOWICE
PONAR Wadowice S.A. ul. Wojska Polskiego 29 34-100 Wadowice Tel.: +48 33 488 21 00 Fax: +48 33 488 21 03 E-mail: ponar@ponar-wadowice.pl Web: www.ponar-wadowice.pl THE PRODUCTION LINE OF PONAR WADOWICE
Displacement. (cc/rev) Tap Water Sea Water MC MV Example.
J anus Motors - Axial Piston Totally oil free, clean and completely safe for people, processes and products. As a result of employing advanced materials, high velocity and loaded sliding surfaces can operate
Handtorque Multipliers What is a Torque Multiplier? How Handtorque Torque Multipliers Work Why use a Handtorque Torque Multiplier?
Handtorque Multipliers What is a Torque Multiplier? A torque multiplier is a device that increases the torque that can be applied by an operator. Because the power output can not exceed the power input,
Company Information. Omni Gear. Shanghai Manufacturing Facility. Product ready for shipment. Houston Assembly Facility
Omni Gear Company Information Shanghai Manufacturing Facility Omni Gear provides world markets with precision quality open gearing and enclosed drives in production lots of 50 to 10,000 pieces. With American
Geared Piston Air Motors
Geared Piston Air Motors GEARED PISTON AIR MOTORS The latest technology in air motors Armak has been continually developing over the past 7 years a contact free rotary piston design of geared piston motor,
HEAVY DUTY WORM GEARBOX MODEL SBWG
FEATURES AND BENEFITS The SBWG model is suitable for use with Butterfly, Plug and any other type requiring quarter turn motion for thrust and torque applications High Tensile Aluminium bronze material
SPEED INCREASER GEARBOX FOR PUMPS GR.2 WITH EUROPEAN UNIFIED FLANGE
ML32 SPEED INCRESER GERBOX FOR PUMPS GR.2 WITH EUROPEN UNIFIED FLNGE 114 [4.4] 6 [3.77] 32.35 [1.273] 6.62 [3.41] 71.5 [2.15] N 4 M t.u. 13 [dept.51] -.5 -.1 Ø 2 [Ø 3.22 ] -.2 -.4 7.5 [.25] z14 DIN 542
HPC. Dual Displacement Staffa Radial Piston Motors HT 18 / C / 150 / 1007 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
Kawasaki Motors Corp., U.S.A. Precision Machinery Division. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HM(HD)B 270 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3
Fisher 1077 Manual Handwheel Rotary Actuator
1077 Handwheel Actuator Product Bulletin Fisher 1077 Manual Handwheel Rotary Actuator Fisher 1077 manual only handwheel actuator is for use with rotary shaft valves such as the 9500 butterfly valve; 8532,
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 325. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 325 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance
HPVR-10 AXIAL PISTON PUMPS
The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that
Handtorque Multipliers What is a Torque Multiplier? How Handtorque Torque Multipliers Work Why use a Handtorque Torque Multiplier?
www.norbar.com Handtorque Multipliers What is a Torque Multiplier? A torque multiplier is a device that increases the torque that can be applied by an operator. Because the power output can not exceed
Linear Motion Flanged Trapezoidal Nuts
Linear Motion Flanged apezoidal Nuts Material Cast Iron GG25 DIN 103 Round, Flanged without holes, Quality 8 H d x p L I da dn 1-5 List Price 6-19 -10% 20-39 -20% 40-59 -30% 60-99 -35% 100-499 -40% 500-999
V Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 1 D X A 11 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Ma. Displacement (cm 3 /n): 15, 18, 23, 25,
TX2 Serie Product Catalog. 2017v1.1 Edition
TX2 Serie Product Catalog 2017v1.1 Edition Company Overview Benevelli is a company established in 1962 that designs and manufactures transmissions for self propelled vehicles, focused on battery operated
AP212HP Cast Iron Gear Pumps
Cast Iron Gear Pumps Standard and Low Noise series Reference: 200-P-991236-EN-01 Issue: 09.2016 1/56 Contents Page 1 General information... 5 1.1 External gear pumps components... 6 1.2 Technical data...
DIN /DIN Aseptic Flange Union for DIN 11866/11850 Tube
/ Aseptic Flange Union for DIN 11866/11850 Tube / Aseptic Flange Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
HYDRAULIC-MOTORS. Radial Piston Motors with fixed displacement RM...X series V g = 250 cm 3 /rev cm 3 /rev
s with fixed displacement RM...X series V g = 250 cm 3 /rev - 900 cm 3 /rev HYDRAULIC-MOTORS Catalogue No. HM1-015E RM 250X - RM 900X Page 2 Features: many displacements for all applications very high
Automation for a Changing World. Delta Planetary Gearbox PS High Precision Series.
Automation for a Changing World Delta Planetary Gearbox PS High Precision Series www.deltaww.com PS Series Planetary Gearbox PS High Precision Series The PS Series Planetary Gearbox features many advantages
V Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V A 1 R B S - A D X A 1 Customers demand Pump Series V Links Type (only V -18): none - Standard A - SAE A bolts Ma. (cm 3 /n):, 18, 3,, 38, 4,, 7 Pump Control Type
Gear Pumps - AP05. Reference: 200-P EN-05 1/26. Issue:
Gear Pumps - Reference: 200-P-991218-EN-05 Issue: 09.2015 1/26 Contents Page 1 General information... 3 1.1 Introduction to the product... 3 1.2 Non-standard symbols used in the text... 4 2 Technical information...
10.3 Flanged Connections acc. to EN 1092
10.3 Flanged Connections acc. to EN 1092 EN 1092 is split into two sections: - EN 1092-1 edition 09-2008 for steel flanges - EN 1092-2 edition 06-1997 for cast iron flanges EN 1092 contains dimensions
Gear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Contents Contents Page PGP/PGM500 Characteristics... 3 PGP502 Ordering... 4 PGP502 Performance curves... 5
SIHI LPH-X - Liquid Ring Vacuum Pump One Stage
- Liquid Ring Vacuum Pump One Stage LPH 40106, LPH 40411, LPH 40516 Pressure Range: Suction Range: 150 to 1013 mbar 50 to 270 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but
QHD1 TABLE OF CONTENTS. Gear Pump Catalogue Table of Contents
TABE OF CONTENTS Table of Contents DESCIPTION... 2 BASIC PATS OF PUMP... 2 PAAMETE TABE... 3 FOMUAS USED FO CACUATION... 4 PUMP EFFICIENCIES... 4 WOKING IQUID... 5 PESSUE OAD... 5 OTHE EQUIEMENTS... 6
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
Series HOL-W Welded Construction Hydraulic Cylinders
Series HOL-W Welded Construction Hydraulic Cylinders Description Series HOL-W hydraulic cylinders are available in Industrial and Marine specifications, they are of a heavy duty welded construction and
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
Large Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions
Engineering & Manufacturing Solutions LEFC Specifications: See flow chart for capacity. Max. 3000 psi cartridge input pressure. Nominally Rated for 3000 psi (207 bar). Tank Port - #4 SAE (10 psi (0.69
AN ISO 9001 : 2008 COMPANY SWING CHECK VALVE. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 COMPNY SWING CHECK VLVE Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TECH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 14 16 18 20
MS-Series. S Series. Twin Triple Screw Pumps.
MS-Series S Series Twin Triple Screw Pumps W h e r e I n n o v a t i o n F l o w s www.maag.com Triple Screw Pump S E R I E S A Safer, Greener, More Cost-Effective Pumping Solution Maag, part of Dover
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance
Hy-Trans Product Guide
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
HYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG. Hybel - Hydraulic Oil Pumps and Motors
HYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG Hybel Hydraulic Oil Pumps and Motors HYDRAULIC OIL PUMPS AND MOTORS Contents CONTENTS About us.... 04 Products Line.... 06 Configure your product.... 08 Aluminibeta
Series T6W Welded Construction Hydraulic Cylinders
Series T6W Welded Construction Hydraulic Cylinders Description Series T6W hydraulic cylinders are available in Industrial and Marine specifications, they are of a heavy duty welded construction and are
Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
Carbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
Table of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold
Flange Dimensions Based on Tables D and E of BS 10 : Common BS 10 Table D Dimensions BS 10 Table E Dimensions Flange Size Flange.
BS 10 : 1962 British Standard BS 10 : 1962 - Specification for s and Bolting for Pipes, Valves, and Fittings. This covers plain, boss, integrally cast or forged, and welding neck type flanges, in ten tables.
Output flow In l/min at 1500 min
Introduction With thru drive For single and multiple pumps Swash plate type for open circuit 1. New type of swash plate and large servo piston with strong bias spring achieves fast response, reduce the
Vane Air Motors - P1V-B
Vane Air Motors - P1V-B These large motors are designed for use in the most arduous applications, requiring considerable power, torque, robustness and reliability Operating information Working pressure:
SIHI LPH-X - Liquid Ring Vacuum Pump Two Stage
- Liquid Ring Vacuum Pump Two Stage 45008, 45311, 45316 Pressure Range: Suction Volume: 33 to 1013 mbar 55 to 258 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but robust construction
Truck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi 1 l...0,264 US
SPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMC 045. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMC 045 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance
Cast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
High Torque Low Speed Motors MR - MRE
High Torque Low Speed Motors MR - MRE Calzoni Radial Piston Technology aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding
Heavy Duty Hydrostatic Transmissions
Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded
PARTS CATALOG MODELS 310, 410, 610, 910 GRAIN CART. Unverferth
Unverferth Manufacturing Company, Inc. P.O. Box 357 Kalida, Ohio 45853 (419) 532-3121 FAX (419) 532-2468 Grain Carts PARTS CATALOG 290901 MODELS 310, 410, 610, 910 GRAIN CART REVISED 10-12-00 Unverferth
AXIAL PISTON PUMPS V SERIES V 23 - V 25 Series Axial Piston Pump Installation drawings
V 23 - V 25 Series Axial Piston Pump Installation drawings V 23 FG - V 25 FG Dual Pressure & Flow Control by Solenoid Operated & Remote Valve V 23 G - V 25 G Remote Pressure Compensator Control V 23 GJ
PUMP TYPE Single stage, axially split volute casing pump with double entry radial impeller, for horizontal installation.
SKD SERIES PRODUCT DESCRIPTION AND TECHNICAL DATA PUMP TYPE Single stage, axially split volute casing pump with double entry radial impeller, for horizontal installation. APPLICATION Water supply systems,
S and SF Series Cast Iron Inverted Bucket Steam Traps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
INSTRUCTIONS FOR USE FACE GEARBOXES
INSTRUCTIONS FOR USE FACE GEARBOXES TNC MTC-TC KTM ES Declaration of Conformity Producer: TOS ZNOJMO, akciová společnost Družstevní 3 CZ 669 02 Znojmo Equipment: Face gearboxes Type/ Modification:MTC,
CHIARAVALLI Trasmissioni spa
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
www.motiontech.com.au Copyright SERVOMECH This catalogue contents are under publisher copyright and may not be reproduced unless permission is agreed. Every care has been taken to ensure the accuracy of
External gear pump Series G
External gear pump Series G RE 10 093/04.14 Replace RE 10 093/06.13 AZPG-22 Fixed pumps V = 22.5...100 cm 3 / rev Overview of contents Contents Page General 2 Product overview 3 Ordering code single pumps
ES 134 ES 144 Tank top mounting Connection up to SAE 1½ Nominal flow rate up to 130 l/min
Suction Filters ES 134 ES 144 Tank top mounting Connection up to SAE 1½ Nominal flow rate up to 130 l/min Description Application To be installed in the suction line of the pumps of hydraulic systems resp.
B.W AND POINTS HITCH LEAF AND DEBRIS BLOWERS
B.W. 3500 AND 4500 3 POINTS HITCH LEAF AND DEBRIS BLOWERS 1 32-34-0030 PTO SHAFT (T60) 1 2 32-55-1040 PTO GUARD "STICKER INCLUDED" 1 3 NC17-46-0018 PLASTIC KNOB 2 4 32-50-1040 BELT GUARD SUPPORT 2 5 32-57-1047