Innovative Handy Comfortable Exact

Transcription

1 Innovative Handy Comfortable Exact Microprocessor controlled peristaltic pumps Multifunctional for all applications in laboratories of Analytic, Biotechnology, Medicine

2 Peristaltic Pumps TC / TU / TL / TB / TI / TV / HP A perfect pump can transport the fluid sterile based on the peristaltic principle. A tube pump should be able to pump even viscous media without problems. medorex tube pumps master both functions. medorex peristaltic pumps can be used in the laboratories of medicine, biotechnology, environmental analytics, chemistry and food industry. They differ by the following qualities from pumps of other companies: Simple operation using 5 function keys Easy change of tubes Graphical LCD-display with two lines Display of pump capacity in ml/min Clockwise/anticlockwise rotation Variable driving speed 1:100 controlled by microprocessor Calibration, timer operation, cyclic operation. start and stop High precision. linearity and reproducibility > 0.3% Option of external triggering Temperature and current limitation for max. reliability even on continuous operation High quality motors with almost noiseless transmission 6 and 8 roller heads with low pulsation Depending on pump type usable as dosing pump Pump heads can be disassembled easily and turned by 90 Duplication of flow rate by parallel operation of two channels Stackable case Operation: A touch pad with 5 function keys and a display with 2 lines ensure very simple and comfortable the function of all medorex peristaltic-pumps. The display takes the operation and shows during the operation of the pumps all relevant data. The flow rates can be adjusted by the calibrating function both by the proportional choice of the speed and directly by predefined flow of liquid very exact. At multiple channels pumps is advisable to use the same sizes of tube cassettes, tubes and all channels for the calibration of the capacity indication because the calibration of only one channel is enough. However the flow rates remain untouched of it because they are dependent on tubediameter and outer-influences like the pressure, viscosity, Temperature of the liquids. In the timer function are predefined the break time and the number of cycles. In the tact operation are to adjust the flow rates and to trigger the function by hand. The start of both functions can be triggered by a foot switch also. All data are saved up to the further change. Pump capacities: The pump capacities shown in the particular tables apply to a pump head with 3. The pump flow rates decrease with increasing number. With 6 decrease the flow rates about approx. 30% and the pulsation is diminished. With 8 the flow rates decrease about approx. 40% and the pulsation is the least. : Timer and trigger function depending on the type External control. analog 0-10 V External control. analog (0) 4-20 ma External control. digital RS heads 8- heads 2-channel models 3-channel models 4-channel models depending on the type Stainless steel case Foot switch

3 TC TU Flow rate per channel ml/min The TC peristaltic pump is an innovative and exact pump, which can be used in applications in all laboratories. It is characterized by its precision and reliability. 106 mm Number of 3, 6 or 8 Number of channels 1 or 2 Flow rate per channel ml/min medorex hose pump "TU" promotes shear sensitive and viscous fluids easily, accurately and reliably. 84 or 62 mm Number of 3, 6 or 8 Number of channels x 146 x 245 mm 5800 g T 1.2 A / 250 V 95 W 156 x 146 x 203 mm 4700 g T 1.0 A / 250 V 48 W No. of Tube Head Ø 106 ID x W ml/min x x x x No. of Tube Head Ø 62 Head Ø 84 ID x W ml/min ml/min x x x x x TC 3 External triggering analog 0-10 V, external triggering analog (0) 4-20 ma, external triggering digital RS 232, 6- and 8- head, 2 channel model, housing of stainless steel, foot switch TU 3 External triggering, analog 0-10 V, external triggering analog (0) 4-20 ma, external triggering digital RS 232, 6- and 8- head, 2 channel model, 3 and 4 channel model, housing of stainless steel, foot switch

4 TB TBS Flow rate per channel ml/min Simple operation via two control knobs Variable driving speed 1:10 62 mm Number of 3, 6 or 8 Number of channels 1-2 Flow rate per channel TBS ml/min Simple operation via two control knobs Variable driving speed 1:10 62 and 84 mm Number of 3, 6 or 8 Number of channels g T 0.2 A / 250V 10 W T 0.2 A / 250V 15 W No. of Tube Driving speed 150 rpm 10 rpm ID x W ml/min ml/min 3 1 x x x x x x x TB 3 6 and 8- head, 2 channel model, housing of stainless steel, No. of Tube Head Ø 62 Head Ø 84 ID x W ml/min [ml/min] 3 1 x x x x x x x x TBS 3 6 and 8- head, 2 channel model, housing of stainless steel

5 TBE TL Flow rate per channel TBE ml/min Variable driving speed Head Ø 62 and 84: 1:20 Variable driving speed Head Ø , 84 and 106 mm Number of 3, 6 or 8 Number of channels 1-2 Flow rate per channel 0.1 µl ml/min Simple operation and tube change. Suitable for all sensitive tests in medicine, biotechnology, food and chemical industries. 62 mm Number of 3, 6 or 8 Number of channels g 0.63 A / 250V EC-motor with gearbox 35 W 1800 g T 0.2 A / 250 V 10 W Head Ø 62 Head Ø 62 Head Ø 84 Head Ø 106 No. of Tube rpm rpm rpm rpm ID x W ml/min ml/min ml/min ml/min 3 1 x x x x x x x x x x TBE 3 6 and 8- head, 2 channel model, housing of stainless steel No. of Tube Driving speed 150 rpm 15 rpm ml/min µl/min x x x x x x x x x TL/150 TL/10 3 External triggering analog 0-10 V, (0) 4-20 ma, external triggering digital RS 232, 6- and 8- head, 2, 3 and 4 channel model, housing of stainless steel, foot switch

6 TV TVS Flow rate per channel ml/min Available with 3 fixed driving speeds Standard: 50 rpm 62 mm Number of 3, 6 or 8 Number of channels 1-4 (2) Flow rate per channel ml/min Available with 3 fixed driving speeds Standard: 200 rpm TVS 84 mm Number of 3, 6 or 8 Number of channels g T 0.2 A/250 V AC motor with gearbox 5 W 1800 g T 0.2 A/250 V AC motor with gearbox 15 W Type TV/20 TV/50 TV/100 Head Ø 62 Ø 62 Ø 62 No. of Speed rpm No. of channels Tube ID x W ml/min ml/min ml/min x x x x x x x x Head Ø 84 No. of Speed rpm 200 No. of 1 channels Tube ID x W ml/min x x x x x x x x x x TV/ head, 8- head, 2, 3 and 4 channel model, housing of stainless steel, foot switch TV/50 TV/ channel, the rest like above TVS 3 6- head, 8- head, housing of stainless steel, foot switch

7 TI HP Flow rate per channel ml/min Timer pump, cyclic operation, number of dowsing s and intervals may be reselected from 0.1 to 999 s on the 2 lines of the LCD display, dosing-pulse triggering at the device or extern by floating contact. Available with 3 fixed driving speeds Standard: 50 rpm 62 mm Number of 3, 6 or 8 Number of channels 1-4 (2) Flow rate per channel 0.05 µl - 27 ml/min HP is a mini pump with two fixed speeds to choose from. Application field: Sensitive tests of medical, biotechnological, food chemical and pharmaceutical researches 42 mm Number of 6 Number of channels g T 0.2 A / 250 V AC motor with gearbox 5 W External power supply 73 x 56 x 120 mm 550 g 12 VACS 110/220 VAC 6 W Speed rpm No. of No. of channels Tube ID x W ml/min x x x x x x x x Driving speed No. of Tube 90 rpm 10 rpm ID x W ml/min µl/min x x x x x x x TI62/ head, 8- head, 2, 3 and 4 channel model, housing of stainless steel, foot switch TI62/50 TI62/100 3 See above but without 3 and 4 channel models Type Number of HP/90 HP/10 6 External triggering, analog 0-10 V, external triggering analog (0) 4-20 ma, external triggering digital RS 232, foot switch

8 Insertion of tubes 1. Open swivel lever 2. Remove tube cassette 3. Insert appropriate tube 4. Pull tube tight and Insert the tube cassette 5. Close swivel lever until it locks Commercial tubes without stopper can be used