High power roller chains with improved fatigue strength and impact strength
|
|
|
- Donald McGee
- 5 years ago
- Views:
Transcription
1 Ultimate Power hain Series HI-PWR-S Type hains High power roller chains with improved fatigue strength and impact strength HI-PWR-S roller chains are enhanced in fatigue strength and impact strength without changing the dimension in the pin length direction of standard roller chains. s are enlarged, and the machining accuracy and assembling accuracy of components are improved. The roller chains hold high transmission efficiency for applications from low to high speeds and are powerful enough to withstand long-term use. Recommended uses ompared to standard roller chains, HI-PWR-S roller chains are higher in maximum kilowatt rating by about 30 percent in a medium to low speed range. They exhibit excellent capability in places where large shock loads are applied, drive units for frequent start/ stop, and also in high speed applications. Maximum kilowatt ratings (kw) Maximum kilowatt rating diagram Rotating speed of smaller sprocket (r/ min) <Examples> ivil engineering machines such as skid steer, trenchers, trucks, cranes, agitating trucks, forklifts and drive units for conveyors, elevators, stackers, etc. 50
2 llowable 0 Tensile strength index Temperature Range in Use GRIULTURE ONST- RUTION OUTDOOR Selection of chains In general, select your chain with reference to "Designing of hain Transmission" (P~126) and also to the tables of "Drive Performance" and "" of HI-PWR-S type roller chains (P52~59) However, only for a special case of low speed and less shock, "Low-speed selection" (P1) is also applicable. s HI-PWR-S chains and NSI standard chains are the same in basic dimensions. Use NSI standard sprockets. onnecting links and offset links Use H connecting links for HI-PWR-S. In an H connecting link, the pins are lightly interference-fitted with the connecting plate. For the connection between the connecting plate and the connecting pins, spring pins are used instead of cotter pins for a standard roller chain. The center plates of an H connecting link for multiplex chain has bushings pressed in. HI-PWR-S roller chains do not have any offset link. Use an even number of links. Never make the holes of the connecting plate larger and never make the pins thinner to facilitate the work for fitting the pins into the connecting plate, since otherwise the fatigue strength will be lowered. HJ HI-PWR-S 80 HI-PWR-S 100 HI-PWR-S HI-PWR-S HI-PWR-S 0 HI-PWR-S HI-PWR-S 0 HI-PWR-S 0 NSI* link pitch Note: 1. The values of average tensile strength and maximum allowable load are for chains. 2. sk us for the delivery time. 3. vg. tensile strength Max. allowable load Max. allowable load , , , ,880 12, , ,450, , ,930 5, , ,7 3 31, , , , , , , , , ,600.0,400.70
3 Ultimate Power hain Series HI-PWR-S80 (Please refer to P33 for sprocket) NSI* link HI-PWR-S 80 HI-PWR-S 80-2 HI-PWR-S ,680,330 23, ,530,060 25, ,890 3,0 4, Max. kilowatt Ratings HI-PWR-S
4 HI-PWR-S100 (Please refer to P35 for sprocket) NSI* link HI-PWR-S 100 HI-PWR-S HI-PWR-S ,880 23,760 35, ,890 25,890 38, ,090 5,0 7, Max. kilowatt Ratings HI-PWR-S
5 Ultimate Power hain Series HI-PWR-S (Please refer to P37 for sprocket) NSI* link HI-PWR-S HI-PWR-S -2 HI-PWR-S ,450 32,890 49, ,880 37,770 56, ,080 6,930 10, Max. kilowatt Ratings HI-PWR-S
6 HI-PWR-S (Please refer to P39 for sprocket) NSI* link HI-PWR-S HI-PWR-S -2 HI-PWR-S ,930 43,860 65, ,870 49,750 74, ,470 9,310, Max. kilowatt Ratings HI-PWR-S
7 Ultimate Power hain Series HI-PWR-S0 (Please refer to P41 for sprocket) NSI* link HI-PWR-S 0 HI-PWR-S 0-2 HI-PWR-S ,7 55,430 83, ,780 63,550 95, ,0 12,, Max. kilowatt Ratings HI-PWR-S
8 HI-PWR-S (Please refer to P43 for sprocket) NSI* link HI-PWR-S HI-PWR-S -2 HI-PWR-S , 38,480 76,950, , 41,830 83, , ,460,310, Max. kilowatt Ratings HI-PWR-S
9 Ultimate Power hain Series HI-PWR-S0 (Please refer to P45 for sprocket) NSI* link HI-PWR-S 0 HI-PWR-S 0-2 HI-PWR-S ,380 46,700 93,400, ,000 1,500 50,760,5 2, ,960,850, Max. kilowatt Ratings HI-PWR-S
10 HI-PWR-S0 (Please refer to P47 for sprocket) NSI* link HI-PWR-S 0 HI-PWR-S 0-2 HI-PWR-S ,334 2,001 67,7,430 3, ,450 2,5 73,600 7,0 2, ,400,840 33, Max. kilowatt Ratings HI-PWR-S
ANSI RS Roller Chain
U.S. TSUBAKI RS ROLLER CHAIN IMPROVED ANSI RS Roller Chain RS ROLLER CHAIN RS11 RS240 Superior Impact Resistance U.S. Tsubaki chain has increased tensile strength and approximately 20% greater impact resistance
PRECISION ROLLER CHAIN AGRICULTURAL, STEEL PINTLE STEEL DETACHABLE CHAIN, T-BAR AND T-ROD WELDED STEEL CHAIN AND ATTACHMENTS...
TABLE OF CONTENTS PRECISION ROLLER CHAIN...1-34 AGRICULTURAL, STEEL PINTLE STEEL DETACHABLE CHAIN, T-BAR AND T-ROD...35-56 WELDED STEEL CHAIN AND ATTACHMENTS...57-61 STEEL BUSHED CHAIN AND ATTACHMENTS...62-67
U.S. TSUBAKI DRIVE CHAINS
DRIVE CHAINS Contents Page ASME/ANSI RS ROLLER CHAIN A- ~ A-24 INTRODUCTION A- ~ A-5 RS25 THROUGH RS24 A-6 ~ A-9 HEAVY SERIES A-2 RS DOUBLE PITCH ROLLER CHAINS A-2 SELECTION AND ENGINEERING INFORMATION
Chain. ceeder. U.S. Tsubaki, Inc. Lock out dirt Lock in lube. A Revolutionary Innovation in Lube-free Chain. Roller Chain Division
U.S. Tsubaki, Inc. Roller Chain Division ceeder Chain A Revolutionary Innovation in Lube-free Chain Lock out dirt Lock in lube Exceed Your Expectations Lasts up to ten times longer than other lube-free
The HKK Solid Advantage
The HKK Solid Advantage HKK Chain, with its cold-forged, solid bushings, solid rollers, and specially treated pins and bushings provides a unique advantage over conventional chains. HKK s cold forging
DRIVE CHAINS ENGINEERED STEEL DRIVE CHAINS DRIVE CHAINS
ENGINEERED STEEL Designed to give you superior performance, even under the most punishing conditions Rugged, all-steel Rex and Link-Belt drive chains are built to perform at levels other drive chains can
Oilfield Chain 7F
Oilfield Chain 7F-0008 www.renoldjeffrey.com 2 I Renold Oilfield Chain Renold Oilfield Chain Unique quality and safety Consistent reliability Renold's 100+ years of experience in the design and manufacture
U.S. TSUBAKI DRIVE CHAINS
DRIVE CHAINS Contents Page ANSI RS ROLLER CHAIN A- ~ A-4 INTRODUCTION A- ~ A-5 RS5 THROUGH RS4 A-6 ~ A-9 HEAVY SERIES A- RS DOUBLE PITCH ROLLER CHAINS A- SELECTION AND ENGINEERING INFORMATION A- ~ A-4
ROLLER LUBRICANT VISCOSITY RATING
CHAIN INFORMATION OUTER PLATE OUTER PLATE PIN 2 PIECES OF EACH MAKE AN OUTER LINK BUSH INNER PLATE INNER PLATE 2 PIECES OF EACH MAKE AN INNER LINK ROLLER AMERICAN BRITISH Lubrication (Dependent on power
General Catalog SOLID BUSHING SOLID ROLLER SOLID POWER
General Catalog SOLI USING SOLI ROLLER SOLI POER SOLI USING SOLI ROLLER SOLI POER SOLI USING SOLI ROLLER SOLI POER SOLI USING SOLI ROLLER SOLI POER SOLI USING SOLI ROLLER SOLI POER SOLI USING SOLI ROLLER
More Powerful ANSI Chains
There s Nothing Standard about Tsubaki Performance More Powerful ANSI Chains Improve reliability Reduce downtime Decrease equipment costs Tsubaki: The choice for chain Tsubaki ANSI Chains Your link to
CAUTION MAINTENANCE INFORMATION CONNECTING AND DISCONNECTING CHAIN
CONNECTING AND DISCONNECTING CHAIN Introduction Chains are manufactured with connectors, either pins or rivets of various constructions depending upon the chain type, i.e., offset or straight sidebar,
DIAMOND ROLLER CHAIN. For Agricultural and Construction Equipment
DIAMOND ROLLER CHAIN For Agricultural and Construction Equipment FABRICATION While roller chain would appear to be a simple product, the number of components in a ten foot section of 40 pitch chain totals
Offset Link L2 L1. SK1 Attachment
tandard ouble itch hain ouble itch tandard ouble itch hain has the same basic construction as standard roller chain, but chain pitch is twice as long, and the chain has flat-shaped link plates. his series
FLIGHT CHAIN CONVEYOR
8- FLIGHT CHAIN CONVEYOR 5th Edition CAT5 Beginning Serial No. 5000 Revised April 7, 06 Owner's Name Dealer's Name Serial Number Date Purchased Model No. TABLE OF CONTENTS 8- FLIGHT CHAIN CONVEYOR CAT5
TSUBAKI HEAVY DUTY CHAINS THE ULTIMATE IN STRENGTH
TSUBAKI HEAVY DUTY CHAINS THE ULTIMATE IN STRENGTH G8 SERIES DRIVE CHAIN MADE IN JAPAN Located in Kansai Science City, the Kyotanabe plant embodies our wide spectrum of cutting-edge technological solutions.
ITR ELEVATING SCRAPER PARTS
ITR ELEVATING SCRAPER PARTS Make Caterpillar Series & Model 613 / 613B Remarks 1 Chain 9J0115 2 2 Flight Bolt 0S1603 128 2A Flight Nut 6B6684 128 2B Flight Washer 5P8245 128 3 Sprocket 9J1653 2 4 Sprocket
DIAMOND CHAIN COMPANY INC. Maintenance Guide
Maintenance Guide 2006 BULLETIN 1067 TABLE OF CONTENTS ORDERING INFORMATION 3 INSTALLATION 4 LUBRICATION 5 INSPECTIONS 6 ELONGATION LIMITS 7 WHAT IS CHAIN WEAR? Did you know Chain does not STRETCH? Chain
CONTENTS Sprockets for Roller Chain
CONTENTS Sprockets for Roller Chain Features/enefits.................................................... PT14-2 Specification: TAPER-LOCK, A, #35 Pitch......................................................
Modular transfer plates with rollers
Modular transfer plates with rollers For heavy duty construction, and for bigger width please see page 328-330 Create a smooth transfer between two conveyors Can be used individually or back-to back Ultra
RS Double Strand Compatible / LAMBDA Roller / RS160-LMD-1
AMBDA hain RS Double Strand ompatible / AMBDA Roller / RS160-MD-1 ube-free chain RS Double Strand ompatible AMBDA Roller RS160 -MD -1 RS Double Strand ompatible AMBDA aking your roller chain operations
Model 104 Slider Belt Conveyor
Model 104 Slider Belt Conveyor Model Description: The Model 104 Slider Bed Belt is designed with the systems approach in mind. The square head and tail end terminals allow you the flexibility to combine
Oil Field Chain USA. Since 1959 U.S.A. Performance. Institute (API) 7F. QUALITY Service. Made in USA/ Fulton, IL
28 USA Oil Field American Petroleum Institute (API) 7F QUALITY Service Performance Since 1959 1-800-435-0782 www.drivesinc.com USA/ Fulton, IL ISO 9001: 2000 REGISTERED AMERICAN CHAIN ASSOCIATION American
American Standard (ANSI) Roller Chain
American Standard () Roller (All dimensions in inches) Single Roller ISO itch p Between lates Roller Connector links are wider than chain sections. Overall dimensions may vary depending on manufacturer.
Chain Drives. Chain Drives
08 Chain Drives Chain Drives 166 Renold Roller Chains Synergy BS Roller Chain - Duplex Synergy BS Roller Chain - Simplex Renold No. ISO No. Pitch inch A Pitch mm A Inside Width B Roller diam C 116038
Selection Procedure, Example... PT13-16 Basic Horsepower Ratings... PT13-20
CONTENTS Sprockets for Roller Chain V-Drives Features/Benefits.......................................... PT13-2 Specification: TAPER-LOCK, A, B #35 Pitch...............................................
TSUBAKI LOW NOISE DRIVE CHAIN NEW
TSUBAKI LOW NOISE DRIVE CHAIN NEW Low Noise Drive Chain SN Roller Chain Tsubakimoto introduces its original spring roller for use in roller chain. When Tsubaki s SN Roller Chain engages with the sprocket,
ENGINEERING CHAIN DIVISION
Style A ram hains Y G Style D Y G ram hain Specifications hain Width Pins ushings Rollers Sidebars hain ead nd Inside Weight Number Style Overall to L to L Width Dia. Matl. Dia. Matl. Dia. Matl. hick.
Choose from straight, bent, extended pin, wide tab and special attachments in your choice of materials:
A Wide Variety of Attachment for Quality onscious onsumers Extensive attachment chain selection Engineering capabilities Dedicated specialty chain center facility Outstanding customer service hoose from
Conveyor Chain for R Rollers
Semi-F Series s R Conveyor for R s KTMS3075-R 100-link Length Conveyor s/ Shaft Collars ions/racks/ (Transport) s ulleys/flanges itch Diameter D Rail contact width S W Width C Thickness T Diameter d Length
Industrial Chain and Conveying
Industrial Chain List Price Book Industrial Chain and Conveying Chain, Idlers, Engineered Chain, Conveying Equipment 102-606 October 1, 2017 Supersedes January 1, 2017 TABLE OF CONTENTS Chain Lengths and
1008 thru 3030 sizes. C Hub Dia. Short No. Std. Hex Capacity. Key u. F Wrench D Steel Qty. Size Install.
TAPER-LOCK ings - Dimensions PT6-3 1008 thru 3030 sizes DIMENSIONS FOR 1008 THRU 3030 TAPER-LOCK BUSHINGS RATINGS (Lb-in) C Hub Dia. F L M Wrench Torque A B D Std. Short Short No. Torque CL 30 Std. Hex
AEROTHATCH 83/SEEDER 93
FORM NO. 01-505-0110 Rev. B MODEL NO. 44830-20101 & UP MODEL NO. 44831-20101 & UP MODEL NO. 44835-40162 & UP PARTS CATALOG AEROTHATCH 83/SEEDER 93 AEROTHATCH 83 - MODEL NO. 44830 & 44831 MAIN FRAME ASSEMBLY
SAPPHIRE ROLLER CHAIN. Performance that s priced right US CHAIN ( ) diamondchain.com
SAPPHIE OLLE HAIN Performance that s priced right. 1-317-638-6431 1-800 US HAIN (872-4246) diamondchain.com TABLE OF ONTENTS THE NEW STANDAD 3 STANDAD/HEAVY SEIES HAIN Standard Series hain 4 Heavy Series
4. TRANSMISSION 1. SAFETY 2. PREPARATION 3. FRAME 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT
TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT TRANSMISSION 7 x 7 3pt Mounted and Stacking Toolbar Frame PLANTING RATE CHART 3pt Mounted
Service Life and Performance Are Critical,
When Conveyor System Service Life and Performance Are Critical, Do It Right The First Time With Gates THE DRIVING FORCE IN POWER TRANSMISSION The Right Tools and Expertise For Performance Design Gates,
Section 9: Gearboxes: Series F
GEARBOXES Section 9: Gearboxes: Series F The new Fenner Series F geared motor range is primarily designed as a compact shaft mounted unit incorporating an integral torque reaction bracket. ew range now
AN SI Standard Roller Chains
RO LLER CH AIN S AN SI Standard Roller Chains SY's precision power transmission roller chains meet or exceed AN SI standard B29.1. Supplied in single and multiple strands of AN SI sizes from 3/8" to 3"
Feed Rolls 3940 and 3960 PTFH Upper Feed Rolls
Feed Rolls Upper Feed Rolls 12 3940 and 3960 PTFH 3940 and 3960 PTFH Feed Rolls 46 KEY PART NO. PART NAME QTY. SERIAL NO. 00 REMARKS 1 E52437 BUSHING 1 XX 2 34H353 SPRING PIN 1 X X 3/8" X 1-3/4" 3 24H1480
MAX DYNAMIC - Omega equivalent. Standard Coupling
- Omega equivalent Characteristics of 1. Facility protection for twirl and twist, impact and abrasion 2. Very simple replacement and maintenance without oil and grease 3. Very simple replacement without
Agricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
DEBRIS BLOWER 2613 BLOWER ASSEMBLY PARTS CATALOG MODEL NO & UP. The TORO Company All Rights Reserved. FORM NO Rev.
FORM NO. 01-505-0440 Rev. D MODEL NO. 44520-20101 & UP PARTS CATALOG DEBRIS BLOWER 2613 Part 1 61-005-0073 Hitch & Lower Housing 1 2 61-005-0121 Fan Housing 1 3 61-005-0061 Fan Assembly 1 4 01-113-0070
Standard Series Chain 4-5. Heavy Series Chain 6. Non-Standard Series Chain 7. High Strength/Lift Chain 8-9. Specialty Lubrication DURALUBE Chain 10
Diamond Oil Field ondensed Poduct Product Guide Guide Table of ontents Standard Series hain 4-5 Heavy Series hain 6 Non-Standard Series hain 7 High Strength/Lift hain 8-9 Specialty Lubrication DUALUBE
Webb-Stiles Enclosed Track
Webb-Stiles Enclosed Track Webb-Stiles Enclosed Track Conveyors utilize the Universal Enclosed Track Chain and many industry standard components for enclosed track conveyors. Enclosed Track Conveyors are
Chain Drives. Pitch. Basic Types -There are six major types of power-
1 2 Power transmission chains have two things in common; side bars or link plates, and pin and bushing joints. The chain articulates at each joint to operate around a toothed sprocket. The pitch of the
TOPDRESSER 1800 ATTACHMENT FOR WORKMAN 3000 SERIES
MODEL NO. 44220-60001 & UP FORM NO. 01-505-1741 Rev. A PARTS CATALOG TOPDRESSER 1800 ATTACHMENT FOR WORKMAN 3000 SERIES BASE & FRAME ASSEMBLY 1800-3 Part 1 92-4350 Frame - Topdresser 1 2 92-4364 Bracket
GRAIN DECK BELT CONVEYOR PARTS LIST SERIAL NOS
GRAIN DECK BELT CONVEYOR PARTS LIST SERIAL NOS. 112000-115499 1 DISCHARGE ASSEMBLY - GRAIN BELT DRIVE OVER CONVEYOR SERIAL NOS. 112000-115499 2 REF # PART NO. DESCRIPTION QTY 1 C200760 Discharge Weldment
Combine Pickup Heads
Combine Pickup Heads Torsion Combine Pickup Heads Section 6 30 ft. Torsion Combine Pickup Head... 2-5 24 ft. Torsion Combine Pickup Head... 6-9 Return to this page by clicking the upper right corner of
Main Frame (1,676 MM (5-1/2 FT.) Hay Pickup)
Main Frame (,676 MM (5-/2 FT.) Hay Pickup) 2 E34250 STRIPPER 2-3000 AUGER E66297 ANGLE 2 300- AUGER, (SUB FOR E34496) (SUB E9572) E9572 ANGLE 2 AUGER E6905 TUBE 59400-86 Pickup Heads Strippers (,676 MM
Chain and Sprockets. for the Steel Mill Industry. ISO 9001 Registered Quality System Dixon, IL Plants Only.
ISO 9001 Registered Quality System Dixon, IL Plants Only Chain and Sprockets for the Steel Mill Industry Most Models Available in Carbon, Alloy and Stainless Steel www.alliedlocke.com ALLIEDLOCKE Metal
NEW. Lambda Chain. Lube-free chain Patented
NE Lambda Chain Lube-free chain atented hilosophy One hundred years of fundamental technology, and the endless pursuit of new value. subakimoto Chain has worked tirelessly on improving chain performance
One Step Ahead Rod Cutter (Front Mount Unit)
One Step Ahead Rod Cutter (Front Mount Unit) Pickup Head Gear System (LH End View) Section 6 Model Years 1992 1998... 2-3 Model Years 1998 1999 (1 PUH Bearing)... 4-6 Model Years 1998 2012 (1 1/4 PUH Bearing)...
Series SK Straight running plastic chains
Series 80-83 - SK 38-8 - 857 Straight running plastic chains 80 STRAIGHT RUI CHAIS RD=50 38. 38. 7..5 3.5 9.5 Ø 6.35. STRAIGHT RUI CHAIS Series 80 Applications: Food and beverage industry: Conveying lines
Marine Engineering Exam Resource Review of Couplings
1. What are rigid couplings used for? Used to join drive shafts together. True alignment and rigidity are required. Example Drive shafts and production lines, bridge cranes, solid shaft that needs to be
8 x 8 R oller Mill. A. T. Ferrell Company Inc S. Adams St. Bluffton, IN Phone Fax
8 x 8 R oller Mill A. T. Ferrell Company Inc. 1440 S. Adams St. Bluffton, IN 46714 260-824-3400 Phone 260-824-8318 Fax 8 x8 Mill Roll Assembly Item # Part Number Quanity Description 1 90001079 1 Base Frame
TRADITIONAL SHAFT HUB CONNECTIONS
TABLE OF CONTENTS MAV locking devices.... Pg. 2 Traditional shaft hub connections...pg. 3 Advantages of MAV locking devices...pg. 4 The wedge principle..... Pg. 5 Installation removal...pg. 6 Characteristics....
Products Catalogue. Quality Guaranteed
Products Catalogue CHAINS The GB range of Chains, Sprockets, Couplings and Pulleys has evolved from 20 years expertise in the importation and sale of the products locally in the Australia. The GB range
PRODUCT CATALOG. This icon and any blue colored copy are hyperlinks that you can use to navigate to more specific information within this PDF catalog.
Wilmot Company is recognized as a leader in supplying rivetless chain, attachments and related products with unsurpassed customer service. We were the first, the original, over 100 years ago we re #1 in
The right chain! High Performance from Rexnord. Roller chains Factory standard. MODULE_04/GB/2014/03 // No liability accepted for misprints or errors!
High Performance from Rexnord Roller chains Factory standard High Performance from Rexnord. The right chain! Factory standard Roller chains Tailored solutions for specific meets customer needs Inner link
RM42G MOWER Deck and Chute... 5 Spindles, Belts and Pulleys... 7 Mounting Brackets and Axle... 9 Decals... 39, 41
RM42G RM38, RM44, RM48 R Ingersoll RM42G MOWER Deck and Chute... 5 Spindles, Belts and Pulleys... 7 Mounting Brackets and Axle... 9 Decals... 39, 41 RM38, RM44, RM44GR, RM48 MOWER Deck, Belts, Backside
C - Engineered pin-bush conveyor chains and chain sprockets
C - Engineered pin-bush conveyor chains and chain sprockets 142 C - Engineered pin-bush conveyor chains and chain wheels DIN 8165 - DIN 8167 - DIN 8168 ( standard and according drawing ) - Chain sprockets
Diamond Oil Field PRoduct Guide Diamond Condensed Product Guide
Diamond Product Diamond Oilondensed Field Poduct GuideGuide Table of ontents ASE/ASI Series hain 4-5 Heavy Series hain 6 on-standard Series hain 7 High Strength/Lift hain 8-9 Specialty Lubrication DUALUBE
Key factors for superior performance
Since 1917, Tsubakimoto Chain has maintained a line-up of cutting edge chain products with exceptional quality and performance that help end-users meet their power transmission and conveying requirements.
4 Fenner Torque Drive Plus 3
Fenner Torque Drive Plus 3 offers; State of the art power ratings. Compact drive package - reduced weight. Quiet operation. Accuracy of positioning. Anti-static as standard. Runs on standard HTD pulleys.
Roller chains H-Series American type. High Performance from Rexnord. The right chain!
High Performance from Rexnord Roller chains H-Series American type Highly robust & durable through reinforced plates H-Series - American type High Performance from Rexnord. Inner Reinforced, fatigue resistant
MAX DYNAMIC COUPLING
MAX DYNAMIC COUPLING MAX DYNAMIC COUPLING Characteristics of Max Dynamic Coupling 1. Facility protection for twirl and twist, impact and abrasion. 2. Very simple replacement and maintenance without oil
Strong. Powerful. Even Better Performance.
Strong. Powerful. Even Better Performance. www.renoldjeffrey.com 2 I Renold Synergy Chain Renold Synergy Simply the best Synergy was created to meet a specific requirement of our customers: Improved chain
Conveyor Chain ENGLISH ISSUE 8
Conveyor Chain ENLIS ISSUE 8 www.challengept.com Never a problem, always a... CALLENE RODUCT RANE RECISION ROLLER CAIN, IN STEEL, STAINLESS STEEL & ZINC/NICKEL LATED LEAF CAIN EAVY DUTY DRIVE CAIN WELDED
Links. Kg/ft (W) Of 1. Unit CC ,850 3, Links. Of 1. Unit. Chain
s Stainless Steel Milk Crate Finer Power Transmissions stocks a range of economy Stainless Steel chain in British Standard, American Standard and Double. This economy range of Stainless Steel chain offers
300mm Conveyor System
300mm Conveyor System FlexMove Product Catalogue 281 SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width
LAMBDA Chain. U.S. Tsubaki, Inc. The Next Generation of Lube-Free Roller Chain. Better than ever!
U.S. Tsubaki, Inc. Roller Chain Division LAMBDA Chain The Next Generation of Lube-Free Roller Chain Better than ever! Maintenance-Free Even Longer Wear Life Increased Operating Temperatures Unique Patented
Chains & cables: Lubricant function and composition BEST PRACTICES NOTEBOOK
BEST PRACTICES NOTEBOOK Chains & cables: Lubricant function and composition Both lubricant quality and application effectiveness have a significant impact on chain and cable component life cycles. By Mike
Synchronous Belt Failure Analysis Guide
Synchronous Belt Failure Analysis Guide Contents Part 1: Common Causes of Belt Failure Normal Belt Wear and Failure Belt Crimp Failures Shock Load Part 2: Improper Belt Installation Tension Introduction
Installation Tensioning Procedure
Contents PARTICULARS Introduction PIX X treme HTD Belts Construction Features Designation Pitch range Length range Pulley Dimensions Length tolerances Width tolerances PIX X treme Classical Belts Construction
Ratchet lever hoists. Ratchet lever hoists for lifting, pulling, lashing and tensioning
4 lever hoists Ratchet for lifting, pulling, lashing and tensioning Yale Hand Lever Hoists are versatile, portable units for pulling, tensioning, lashing and lifting of loads. The operation of the Hand
MAINTENANCE INSTRUCTIONS
MAINTENANCE INSTRUCTIONS ECOMAT EASY / GIROTEC WRS Version G0101 ECOMAT EASY H / GIROTEC WRS H Version G0301 ECOMAT PLUS / ECOMAT PLUS H Versions G0503 / G0603 V 2.0 Table of contents 1/3 1.0 Maintenance
Large & Small Pitch Heavy, Super & Ultra Double Pitch Leaf. Corrosion Resistant. Stainless Steel Nickel-Plated Neptune Industrial Plastic Poly Steel
ROLLER CHAINS ANSI Large & Small Pitch Heavy, Super & Ultra Double Pitch Leaf Attachment Lube-Free Carbon Steel & Stainless Steel Corrosion Resistant Hollow Pin LAMBDA Xceeder (Felt Seal) Plastic Stainless
LONG LENGTH DESIGN MANUAL CONTENTS PAGE. Introduction Long Length features & benefits... 2 Long Length belting programme... 7
DESIGN MANUAL LONG CONTENTS PAGE LENGTH Introduction Long Length features & benefits... 2 Long Length belting programme... 7 Drive Design Belt drive selection procedure... 8 Belt pitch selection guides...
SYNCHRONOUS BELT DRIVES
Experience The PTH-98 SYNCHRONOUS BELT DRIVES EMERSON POWER TRANSMISSION MORE HORSEPOWER PER DOLLAR... For Positive Performance, Choose... BROWNING Panther Synchronous Drive Systems. Todays Choice For:
ELEVATING UNDERCAR CONVEYOR 12" & 16" FLUSH - TYPE
ELEVATING UNDERCAR CONVEYOR 12" & 16" FLUSH - TYPE OWNER'S MANUAL 19013200 (10/97) Contents Introduction.................................... 1 Warnings...................................... 1 Statement
Chains 2013_FPT BOOK.indb 5 17/02/13 6:54 PM
s Contents Australia s Only Agricultural...08 Detachable chain... 08 Agri-Power-...09 Simplex roller chain... 09 Heavy duty series chain... 09 ANSI Standard...10 ANSI Heavy Duty...11 BS...12 Breaker and
STEELS WITH HIGH MECHANICAL STRENGTH REINFORCED RIVETING. REINFORCED RESISTANCE to shocks et to misalignment
STANDARD CHAINS - SOLID INS ISO STANDARD CHAINS - 1977 RANGE OF CONVEYOR CHAINS STEELS WITH HIGH MECHANICAL STRENGTH improved material RESISTANCE & HARDNESS Increased BREAKING LOADS (see table on next
L I F T I N G C A R T S
L I F T I N G C A R T S LIFTING CARTS The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
Conveyor chain catalogue
Conveyor chain catalogue www.renold.com Table of Contents Section - Conveyor Products and Dimensions Conveyor chain introduction....................................................................5-7 BS
CONTENTS. HT200/HTD Synchronous Belt Drives. Features/Benefits... PT11-2
CONTENTS HT200/HTD Synchronous Belt Drives V-Drives Features/Benefits.......................................... PT11-2 Specification HT TAPER-LOCK Sprockets................................ PT11-4 MPB &
Section 9: Gearboxes: Series K
GEARBOXES Section : 9 Section 9: Gearboxes: Series K The Fenner Series K incorporates all the core design features in a highly efficient yet flexible bevel helical drive. Drives up to 90 Highly efficient
PLASTICS INDEX...L-1 PLASTIC CAPABILITIES...L-2
Index SECTION L PRODUCT PAGE INDEX...L-1 PLASTIC CAPABILITIES...L-2 SECTION I NON-METALLIC SPROCKETS...L-3 - L-12 Sprockets - Stock No. 25 1/4" Pitch...L-3 No. 35 3/8" Pitch...L-4 No. 40 1/2" Pitch...L-5
HEAT RESISTANT LAMBDA CHAIN LUBE-FREE CHAIN
E SUBAKI EA RESISA LAMBDA AI LUBE-FREE AI Lambda hain advantages Increased productivity Lower maintenance costs Greater savings on chain replacement costs leaner working environment Increased equipment
Viking Helical Gear Reducers
Page 610.1 Issue J Gear Ratio Range: (varies by reducer size) 1.87:1 to 7.95:1 Output Speeds (with 1750 rpm input) Reducer Horsepower Range: 950 to 220 rpm 1.4 HP (.1 kw) to 49.8 HP (37.2 kw) THREE SIZES
Oilfield Chain 7F
Oilfield Chain 7F-0008 www.renold.com 2 I Renold Oilfield Chain Renold Oilfield Chain Unique quality and safety Leading edge technology Renold provides practical cost effective solutions, with a commitment
HIGH PRECISION CONVEYOR CHAINS AND SPROCKETS
HIGH PRECISION CONVEYOR CHAINS AND SPROCKETS Dro forged DIN 8165 FV DIN 8167 M SMS 1698 Transmission chains scanchain.net About ScanChain About ScanChain Most roviders of industrial chains in the Nordic
Power Heads. Standard Unload. Power Sweep. Commercial Unload. Bin Systems. Unloading
Standard Unload Power Sweep Commercial Unload Power Heads Unloading Bin Systems Klean Sweep the finishing touch. The unique back-up shield and torque tube combination adjusts for close floor clearance
Massey Ferguson Fitment Guide May 2002
Massey Ferguson Fitment Guide May 2002 Feeder Chains Clean & Return Chains Chains Only Sprockets Replacement parts Copyright Collier and Miller Pty Ltd. ABN 97 000 521 344 The information contained within
Service Life and Performance are Critical,
When Conveyor System Service Life and Performance are Critical, Do it Right the First Time with Gates! The Right Tools and Expertise For Performance Design Gates meets the needs of the materials handling
The right chain! Extreme Performance from Rexnord. Leaf chains RexAthletic. MODULE_08/GB/2014/08 // No liability accepted for misprints or errors!
Extreme Performance from Rexnord Leaf chains RexAthletic RexAthletic Extreme Performance from Rexnord. Good corrosion protection, maximum operating reliability Intermediate plate Pin hardened and tempered,
150mm Conveyor System
150mm Conveyor System FlexMove Product Catalogue 231 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM.
Universal Platform. 246 Model Section 4. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...
Universal Platform 246 Model Section 4 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup
E1650 REMIXING TRANSFER VEHICLE ENGINEERED INNOVATION
E650 REMIXING TRANSFER VEHICLE ENGINEERED INNOVATION Engineered Innovation Weiler innovations have transformed the material transfer vehicle market since their introduction and continue to lead the industry
Universal Platform. 222 Model Section 3. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...
Universal Platform 222 Model Section 3 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup
Twin Master Combine. Threshing Cylinder Section 1. Threshing Cylinder ( ) Threshing Cylinder (2009 Present)...
Threshing Cylinder Section 1 Threshing Cylinder (2006 2008)... 2-8 Threshing Cylinder (2009 Present)... 9-15 Return to this page by clicking the upper right corner of any page in this section. Revised