THERMAL ENGINEERING INTERNATIONAL

Transcription

1 PUBLIC PLANT Plant ClosInG CLOSED BID IN-PERSON OR ONLINE. SEE PAGE 7 FOR DETAILS PUBLIC Rebuilt 2007 Updated MM PINES FIVE-AXIS MULTI-STACK EXTENDED BASE CNC HORIZONTAL TUBE BENDER 3-1/2 X 10 BERTSCH 3-1/2 X 10 HEAVY DUTY INITIAL PINCH MECHANICAL POWER PLATE BENDING ROLL PACIFIC K TON HYDRAULIC PRESS BRAKE PLANT CLOSING THERMAL ENGINEERING INTERNATIONAL 2110 Industrial Road in Sapulpa, Oklahoma (Approx. 15 Miles Southeast of Tulsa) THURSDAY, FEB. 13TH STARTS AT 10AM Inspection: Day prior to auction from 9AM-4PM VANGUARD XHGK TON TURNING ROLLS 50,000 LB. READCO WELDING POSITIONER Industries (1991) Inc. AUCTIONEERS LIQUIDATORS APPRAISERS

2 THERMAL ENGINEERING INTERNATIONAL / 2110 INDUSTRIAL ROAD IN SAPULPA, OK MM PINES FIVE-AXIS MULTI-STACK EXTENDED BASE CNC HORIZONTAL TUBE BENDER Rebuilt 2007 CNC TUBE BENDERS 90 MM PInEs Five-axis Multi-stack Extended Base CnC Horizontal tube Bender, Model MNC-090, Pines S/N , HMT S/N 383B, Complete Rebuild by HMT Horn Machine Tools at Cost of Approx. $170, in 2007 Including New Bend Pro G2 Control & Complete Mechanical & Hydraulic Overhaul, 38' Bed Length, 50-HP Hydraulics w/booster Pump, Thermal Transfer Heat Exchanger, Model AOVH- 25, S/N , Power Feed & Stop, 40' Loading & Feed Conveyor, Catalog Specs: 3.5 x.109 Steel Tubing, 4 x.065 Stainless Steel, 3 x.188 Non- Ferrous Tubing, 14 Standard Bend Radius to Center Line, 136 Standard Max Tube Length Over Mandrel, 72 Standard Carriage Travel, 195 Degrees Bend Arm Rotation, 360 Degrees Max Bend Angle (+ Allowance for Spring Back), 360 Collet Rotation, 4.7 RPM Bending Arm Speed, jeffjr@cia-auction.com for info on rebuild (Rebuilt 2007) 6 PInEs #4 Heavy Duty Base CnC Horizontal tube Bender w/booster & Extended Base, S/N , Complete Rebuild by Pines at Cost of Approx. $185, in 2007, Pines Dial- A-Bend 6SE Touch Screen CNC Control, Approx. 10 Base Extension, Hydraulic Booster, 200 Max. Bend, 20' Table w/hydraulic Stop, 40-HP Hydraulics, Catalog Specifications: 6 x.250 Round Tubing Non Ferrous, 6 x.165 Round Tubing, 4-1/2 x.250 Round Tubing Stainless, 4.50 x.337 Steel Pipe, 4 x.250 Square Tubing, 3 x 6 x.250 Rectangular Steel Tubing, 3 x 5 x.250 Rectangular Steel Tubing, 3-1/2 Round Bar, 3-1/8 Square Bar, Section Modulus (Z), 6 Max. Horizontal & Vertical (Rebuilt 2007) 6 PINES #4 HEAVY DUTY BASE CNC HORIZONTAL TUBE BENDER Rebuilt

3 THURSDAY, FEBRUARY 13TH AT 10AM / INSPECTION: DAY PRIOR TO AUCTION FROM 9AM - 4PM PRESS BRAKE PaCIFIC 400-ton Hydraulic Press Brake, Model K400-14, S/N 6872, 1/2" x 11' Capacity, 14' Overall, 146" Between Housings, 10" Throat, Hurco Autobed 5C, 36" Back Gauge SHEAR CInCInnatI Hydraulic squaring shear, Model Century 4H12, S/N 3C031, 12' x 1/2" Mild, Roller Ball Top, (2) 32" Front Gauge Supports, 60" Squaring Arm, 32" Front Gauge Supports, 60" Squaring Arm, 32" Power Back Gauge, 25 HP PIPE EQUIPMENT HYDRaUlIC HoRIZontal BUllDoZER type Pipe Bender, 3" Dies, 20-HP Hydraulics & Reservoir PanGBoRn tube Blast system, 50' Load & Unload Conveyors, Blast Cleaner P/N ES1902, S/N , Pass Thru Type, 4" Max Dia. Pipe Dust Collector & Reclaim System (System Rebuild Parts are in Plant Inventory) PInEs tube End Former, S/N , 1-3/4" Sizing Dies, 30-HP Hydraulics DRaFto Induction type tube swedger, w/30-hp Hydraulic System, Tocco Induction Power Supply, Tube End Heater, Thermal Transfer Heat Exchanger Custom tube straightener, 9" Dia. Tube, 3-HP Hydraulics PACIFIC K TON HYDRAULIC PRESS BRAKE PINES TUBE END FORMER CINCINNATI CENTURY 4H12 HYDRAULIC SQUARING SHEAR HYDRAULIC HORIZONTAL BULLDOZER TYPE PIPE BENDER PANGBORN TUBE BLAST SYSTEM 3

4 THERMAL ENGINEERING INTERNATIONAL / 2110 INDUSTRIAL ROAD IN SAPULPA, OK PLATE BENDING ROLLS 3-1/2 X 10 BERTSCH 3-1/2 X 10 HEAVY DUTY INITIAL PINCH MECHANICAL POWER PLATE BENDING ROLL Updated 2011 BERTSCH 2-1/2 X 10 Heavy Duty Initial Pinch Mechanical Power Plate Bending Roll ROUNDO 10' X 1/2" PLATE BENDING ROLLS 2-1/2 X 10 PLATE BENDING ROLLS BERtsCH 3-1/2 x 10 Heavy Duty Initial Pinch Mechanical Power Plate Bending Roll, Model 34, S/N 9926, Manufactured 1971, Capacities 3-1/2" Cold & 7" Hot, Approx. $150, Work Done Over Last 2 Years Including Replacing Main Worm Gear, Wedge Motor, Limit Torque Update and Lube System Upgrade, 10-2 Tread Length, 10-4 Between Side Frames, Arranged to Receive Interchangeable Top Rolls from 22 Mi. to 35 Max. Diameter, Arranged w/ about 11 Vertical Adjustment of Lower Front Pinch Roll, Furnished w/ Standard 1045, 35 Diameter Top Roll, Idler Top Roll, (2) Lower Rolls Geared, Hydraulic Powr-Pak for Drop Hinge Operation; S/N , 20 Diameter Dial Type Indicator for Rear Roll, Centralized Farval Grease Lubricating System, Automatic Power Type, Guards Enclosing Gears, Steel Housing Hinge, Main Drive Gears, Arranged for Power Adjustment to Lower Front Pinch Roll, 200-HP Main / 100-HP Adjusting Wedge Motor (New 1971, Updated 2011) Bertsch 2-1/2 x 10 Heavy Duty Initial Pinch Mechanical Power Plate Bending Roll, Model 30, S/N M10372, 120 Maximum Bending Length, 26 Top Roll Diameter, 28 Bottom Roll Diameter, Hydraulic Drop End, 125 HP, 60 HP Roll Adjustment Motor, P&H Controls, Min Diameter, x Min Diameter, 10 Diameter Top Roll For 1, No. 30 Special Combination Drive, Heavy Duty, 10 2 Treads, 10 4 Between Frames, Interchangeable Top Rolls from 12 Dia. Min. thru 26 Dia. Max., 8 Max. Daylight Opening Between, 7-1/2 HP Hydraulic System, Digital Type Durant Position Indicator for Rear Roll (New 1978) Located in Milwaukee, will be sold via photo, jeffjr@cia-auction.com for Factory Build Sheet 1992 RoUnDo 10' x 1/2" Plate Bending Rolls, Model PS225, S/N , 122" x 9 1/2" Rolls, Drop End PEXtRo 36" Power Bending Rolls, Model 3416-I, S/N , 3" Dia. Rolls, 16-Gauge POWER TURNING ROLLS 2011 VanGUaRD 600-ton turning Rolls, Model XHGK 600, S/N , Power/Idler Rolls, 35" x 14" Rollers, 175" Between Centers, (2) 7.5 KW Drive Motors, 4"-40" IN/MIN Speed 400-ton Power turning Rolls, 39" x 7" Steel Rollers, 15' Between Centers w/idler 300-ton MItRosKI Power turning Rolls, 39" x 7" Steel Rollers, 178" Between Centers, (2) Idlers 300-ton teledyne REaDCo Idler, 39" x 7" Steel Rollers, 160" Between Centers (2) PREston EastIn 200,000-lb. Power turning Rolls 19" x 9" steel Rollers, 80" Between Centers, Model 11SA- 200HD-3 & 11SA-200HD-4 PREston EastIn 90,000-lb. Power turning Rolls w/idler, Model TDRA 90HD, S/N TDRA 90HD-7, 19" x 18" Rubber Rollers, 80" Between Centers aronson 90,000-lb. Power turning Rolls, 19" x 5" Steel Rollers, 70" Between Centers 34,000 lb. Capacity Power turning Rolls 19" x 12" Rubber Rollers w/idler PREston EastIn Power turning Rolls, 28" x 5" Steel 4

5 THURSDAY, FEBRUARY 13TH AT 10AM / INSPECTION: DAY PRIOR TO AUCTION FROM 9AM - 4PM POWER TURNING ROLLS 2011 VANGUARD XHGK TON TURNING ROLLS 300-TON MITROSKI POWER TURNING ROLLS 400-TON POWER TURNING ROLLS 300-TON TELEDYNE READCO IDLER PRESTIN EASTIN 90,000-LB. POWER TURNING ROLLS Rollers, 92" Between Centers WEBB Power turning Rolls, 13' x 13" Steel Rollers w/idler, 60" Between Centers Power turning Rolls, 78" x 13" Steel Rollers w/idler, 54" Between Centers Rubber turning Rolls, 20" x 6-1/2" Rollers w/idler, 88" Between Centers PREston EastIn Idler, 28" x 5" Steel Rollers, 90" Between Centers Power turning Rolls, 12" x 11" Rubber Rollers, 48" Between Centers w/idler TEST BUILDING sound Insulated Blast test Building, Concrete Pad Mounted w/33" Concrete Walls, 15' Width, 14' Domed Height, Double Door, 60' Length, 3/4" Plate Steel, (8) Walls, Vented OVENS 75' Gas Fired Car Bottom tempering oven, Approx. 12' Inside Width, 5-Zone / 20-Burner, 1,200-1,800 F Honeywell Chart Recorder & Controls 25' Gas Fired Car Bottom tempering oven, Approx. 12' Inside Width, 5-Zone / 20-Burner, 1,200-1,800 F Honeywell Chart Recorder & Controls 75' GAS FIRED CAR BOTTOM TEMPERING OVEN SOUND INSULATED BLAST TEST BUILDING 5

6 THERMAL ENGINEERING INTERNATIONAL / 2110 INDUSTRIAL ROAD IN SAPULPA, OK VANGUARD WELDING MANIPULATOR PANDJIRIS WELDING MANIPULATOR MG PLASMA BURNING TABLE RANSOME 1212 WELDING MANIPULATOR 2011 (2) 200-AMP THERMAL DYNAMIC PAK 200 PLASMA CUTTERS THERMAL DYNAMICS CUTMASTER 152 PLASMA CUTTER CYPRESS 72" CIRCLE BURNER (30+) MILLER, LINCOLN, TRW & PRO-WELD MIG, TIG & STUD WELDERS & POWER SUPPLIES 6

7 THURSDAY, FEBRUARY 13TH AT 10AM / INSPECTION: DAY PRIOR TO AUCTION FROM 9AM - 4PM 50,000 LB. READCO WELDING POSITIONER KOIKE ARONSON WELDING POSITIONER PRESTIN EASTIN 12,000-LB. WELDING POSITIONER UNABLE TO ATTEND? BID ONLINE IN REAL TIME AT ARONSON WELDING POSITIONER PLATE BEVELLERS GUllCo Plate Beveller, Model KBM 28, 5/16" - 2" Capacity, 22-1/2-55 Bevels PUllMaX Beveler, Model X91, 1" Max, Bevel WELDING MANIPULATORS 2008 VanGUaRD Welding Manipulator, Model lhw 6X6, s/n , Max Vertical / Horizontal 236.2" in Work Capacity, 39.4" " in Elevation Speed, 3.28 FT/MIN Traverse Speed, FT/MIN, 180 Rotation, 23' Track, Flux Hopper, (2) Lincoln Idealarc DC600 Power Supplies, Lincoln NA-3S & NA-3N Weld Controllers PanDJIRIs Welding Manipulator, Model 1400 MANIP, S/N , Lincoln Idealarc AC1200 & DC1000 Power Supplies, Lincoln NA-3S & NA- 4 Weld Controllers, 13' Vertical & 18' Horizontal Reach, Mobile Base RansoME Welding Manipulator, Model 1212, S/N , 12' Vertical / Horizontal, Lincoln Idealarc DC1000 Power Supply Flux Hopper lewis Welding Manipulator, 10' Vertical & Horizontal Reach, Lincoln Idealarc DC600 Power Supply, Lincoln NA-3S, Weld Controller, Mobile Base 25' Manipulator travel Rail Welding screens & leads WELDING POSITIONERS 50,000 lb. REaDCo Welding Positioner, Model UPG-500, (1966) S/N S5033, 82" x 82" Table, w/pandjiris Model "A" Chuck, 8,000-lb./In Rotational Torque, 22,500-lb./In Tilt, Capacities: 6", 60" PREstIn EastIn 12,000-lb. Welding Positioner, Model FT120, S/N FT TRACK BURNERS EsaB track Burner Model CM-79, S/N AARJ16003 BUGo GoFER track Burner, Model GOF3240, S/N A arcair Portable track Burner Controller PLASMA TABLE / CUTTERS MG PlasMa Burning table, Model MG4514, S/N 3694, (1) Plasma, (1) Oxy-Ace, (1) Hypertherm arc Writer Head, Model , S/N , Hypertherm Ht4400 Plasma Power supply, S/N , 400 AMP, 46' x 14' Tank, Burny 10 LCD Plus Control, Rebuilt 2000 by Alltra (2) 200-aMP thermal Dynamic PaK 200 Plasma Cutters, (New 2011) thermal Dynamics Cutmaster 152 Plasma Cutter Hypertherm MaX100 Plasma Cutter Hypertherm Powermax 900 Plasma Cutter w/bugo Gofer III track Burner CIRCLE BURNERS CYPREss 72" Circle Burner, Model GB-5, S/N H CYPREss 36" Circle Burner, Model CB-2, S/N B CYPREss 48" Circle Burner, Model CBO-200, S/N A CYPREss Welding Circle Burner, Model 6E-4P, S/N (Parts / Repair) PRESTIN EASTIN WELDING POSITIONER WELDERS & RELATED (4) MIllER XMt 350 CC/CV MIG Welders, 100%, (3) w/miller 70 series Wire Feeder, Miller Coolers, Carts MIllER XMt 304 MIG Welder w/process Controller, Miller Cooler, Cart (3) MIllER Deltaweld 651 MIG Welders, 650-AMP, (1) Parts/Repair) (6) MIllER Deltaweld 650 MIG Welders, 650-AMP (4) MIllER Deltaweld 451 Mig Welder, 450-AMP, w/miller D-52D & D- 54D Wirefeeders MIllER 250 Welder, 100% (2) MEssER / lincoln Euro Matig 35-2 tig Welder (4) MIllER syncrowave 350 tig Welder, 40%, w/cooler, (1) Parts/Repair (2) MIllER syncrowave 250DX tig Welder, 40% w/cooler lincoln Idealarc tig 300/300 Welder, 60%, w/dyna Flux Cooler lincoln Idealarc tig 250/250 Welder, 40% w/bernard Cooler trw stud Welder, 5000 Series, Type 101, Model , S/N 07791B, 20%, Max 1,600-AMP, 3/16" - 3/4" Studs PRo-WElD arc 1200 stud Welder, 1/4" - 5/8" Capacity (2) MIllER CP/CC 1500P Power supplies, 1,500-AMP, w/nelson 3/8" - 7/8" Stud Welder, Model NS-20A-4D lincoln Idealarc DC1000 Power supply 1,000-aMP (6) MIllER Deltaweld 651 & 650 Power supplies, 650-AMP ESAB & BUGO GOFER TRACK BURNERS ltec VI450a Power supply, 450-aMP lincoln Idealarc R3s-400 Power supply, 400-AMP tocco Inductron Power supply, Model OL-294, S/N (Parts / Repair) (12) MIllER Wire Feeders (70 Series, S60, D-52D, S-22A) (11) BERnaRD Coolers (3) MIllER Coolers (13) lincoln Xtractor 1GC Fume Collectors lincoln Fume Collector MIllER load Bank Welding Machine Calibrator PHoEnIX F Dry Rod oven, Type 950FX, Model 5 KEEn Rod oven 7

8 THERMAL ENGINEERING INTERNATIONAL / 2110 INDUSTRIAL ROAD IN SAPULPA, OK (2) HYSTER S120FTS 12,000-LB. FORKLIFTS (2) HYSTER S120FT 12,000-LB. FORKLIFTS CLARK C500Y200 20,000-LB. FORKLIFT (PARTS / REPAIR) CLARK C500Y-155D 11,200-LB. FORKLIFT (PARTS / REPAIR) SULLAIR PORTABLE VACUUM PUMP SULLAIR VACUUM PUMP PARTEK HYDROSTATIC TEST PUMP PORTABLE HYDROSTATIC TESTER 8

9 THURSDAY, FEBRUARY 13TH AT 10AM / INSPECTION: DAY PRIOR TO AUCTION FROM 9AM - 4PM 2 OF 5 TRACK MOBILE TM4000 RAILCAR TRANSFER (5) SPREADER BEAMS FORKLIFTS ClaRK 20,000-lb. Forklift, Model C500Y200, S/N Y , 120" Lift, Dual Solid Front (Parts / Repair) allis CHalMERs 17,000-lb. Forklift, S/N AJK132508, 213" Lift, Solid Tire (Parts / Repair) 2008 HYstER 12,000-lb. Forklifts, Model S120FT, S/N G004V03486F, LPG, GM Engine, Solid Tires, 209" Lift Height, Three-Stage Mast, Side Shift, Fork Positioner, Self-Leveling Forks, 64" Forks, Cab w/fan & Heat 2008 HYstER 12,000-lb. Forklift, Model S120FT, Solid Tires, GM Engine, Lever Shift, 3-Stage Mast, 208" Lift Height, Side Shift, Cab w/heat 2008 HYstER 12,000-lb. Forklift, Model S120FTS, S/N G004V03236F, Compact Body Style, Solid Tires, GM Engine, Lever Shift, Standard Mast, 111" Lift Height 2008 HYstER 12,000-lb. Forklift, Model S120FTS, S/N G004V03440F, Compact Body Style, Solid Tires, GM Engine, Lever Shift, Standard Mast, 111" Lift Height ClaRK 11,200-lb. Forklift, Model C500Y-155D, S/N Y FC, 137" Lift, Solid Tire (Parts / Repair) 2001 YalE 9,000-lb. Forklift, Model GDP090, S/N C813V01693Y, Pneumatic Tires, Diesel Engine, Lever Shift, Standard Mast, 112" Lift Height, Side Shift, 54" Forks ClaRK 6,000-lb. Forklift, Model CGC32, S/N C365L FB, (3) 53' 6" L 220,000-LB. FLATBED RAILCARS Solid Tires, LPG, Lever Shift, Standard Mast, 127" Lift Height, Side Shift 2004 YalE 5,000-lb. Forklift, Model GLC050RGN, S/N E187V22351B, Solid Tires, LPG, Lever Shift, 3-Stage Mast, 195" Lift Height, Side Shift (2) Forklift-Mount 5th Wheel Plates (2) GEnIE Electric Platform scissor lifts (Parts / Repair) skyjack Platform scissor lift (Parts / Repair) MATERIAL HANDLING (2) Flatbed Railcars, 53' 6" Length Steel Deck, 220,000-lb. Capacity, 249,000-lb. Load Limit, 49,260-lb. Frame Weight, ID# SS1002 & SS1004 (1) Flatbed Railcar, 53' 6" Length Steel Deck, 220,000-lb. Capacity, 249,000-lb. Load Limit, 49,260-lb. Frame Weight (Parts/Repair) track Mobile Railcar transfer, Model TM4000 Super, Road/Track Wheels, DSL, Front/Rear Coupler, HR (5) spreader Beams: (2) 120,000-lb. x 26' Lift, (1) 20,000-lb. x 24' Lift, (1) 20,000-lb. x 25' Lift, (1) 20,000-lb. x 30' Tube Lift, S/N ,000-lb. x 35' tube lift spreader Beam, S/N ton Crane Forks, Model HDP-4-42, 42" Forks 1-1/2-ton Crane Forks, 29" Forks 25'l x 8'W Rail Mount transfer Car (8) t/a Flatbed Yard trailers, (3) 40', (1) 45', (1) 47', (1) 40' w/ 8' Tail (1) 40' w/ 12' Tail, (1) 40' w/ 15' Tail (8) Rail Mount transfer Dollies (2) adjustable Work Gantries, 12' Wide Platform, 15' Platform Height trailer tug Pro w/10.5 HP Briggs & stratton Gas Engine (4) 2-1/2" Wire Rope slings, 50-Ton Capacity, 6XWS36+1WRC Construction, D 65 x 7 M Length, Cert Tags (3) CooPERHEat stress Relievers w/chart Recorders, Model MDH PR, S/N 032; Model PMD ; Model PMD TEST / INSPECTION EQUIPMENT sullair Portable Vacuum Pump, Model RSV10-15A AC, S/N ,000-LB. X 35' TUBE LIFT SPREADER BEAM 2 OF 3 V82813, IN/HG Max Vacuum sullair Vacuum Pump, Model VS-20, S/N 003-V87222, 75-HP, Rated Vacuum IN/HG, 1,780 Hours PaRtEK Hydrostatic test Pump, 15,000 PSI, Model L-74, S/N 2656, 6.5 GPM RontonICs Hydrostatic tester, Portable 7.5-HP Pump, 250-Gallon Poly Water Tank Portable Hydrostatic tester, 7.5-HP, 950-Gallon Poly Water Tank (3) Hydrostatic testers, Model PDQC, S/N's 1079, 1577, 1881 lasermark lmh-c laser DaVID WHItE auto laser 900 9

10 THERMAL ENGINEERING INTERNATIONAL / 2110 INDUSTRIAL ROAD IN SAPULPA, OK (6) CRATES AP1000 #4 FINNED STAINLESS TUBES NILFISK ADVANCE SWEEPER / SCRUBBER CLEMCO 2024 ABRASIVE BLAST CLEANER 900-GALLON ARGON REFRIGERATED AIR TANK SUNBEAM GAS FIRED END HEATER 1 OF 2 1 OF 2 THERMCO 6105 GAS MIXER WEBEN JARCO AUTOMATIC CIRCULATING WATER HEATER 2005 (2) LANDA PRESSURE WASHERS (2) LANDA PRESSURE WASHERS MINUTEMAN POWERBOSS FLOOR SWEEPER/SCRUBBER ADAPTIVE VAR COMPENSATOR TRANSFORMER 10

11 THURSDAY, FEBRUARY 13TH AT 10AM / INSPECTION: DAY PRIOR TO AUCTION FROM 9AM - 4PM CHEVROLET DUALLY FLATBED TRUCK INTERNATIONAL TRUCK TRACTOR (PARTS / REPAIR) CARLTON 4' ARM X 11" COLUMN RADIAL ARM DRILL RAW MATERIAL (6) Crates ap1000 #4 Finned stainless tubes, 120/Crate, Approx. 7,200-lb./Crate, 120' Length assorted Plate & structural steel, Drops & Pieces (Parts / Repair) scrap steel (Parts / Repair) ASSORTED EQUIPMENT CaRlton 4' arm x 11" Column Radial arm Drill, MT 4-Spindle, Spindle RPM, Power Clamp & Elevation, 32" x 26" x 23" Box CaRlton 7' arm x 19" Col. Radial arm Drill, MT 6-Spindle, RPM (Parts / Repair) CaRlton 6' arm, 19" Col. Radial Arm Drill, MT 6 Spindle, RPM (Parts / Repair) leblond Dual Drive Engine lathe, 12" 3-Jaw Chuck, 16" Swing Over Bed, 48" Between Centers, 1-1/2" Thru Spindle, 31-2,400 RPM Spindle, Threading, No Carriage lodge & shipley Engine lathe, Model 2516, S/N 47993, 26-1/2" Swing Over Bed, 20" Swing Over Carriage, 192" Between Centers Threading (Parts / Repair) lodge & shipley 20" Power turn lathe (Parts / Repair) sunbeam Gas Fired End Heater, S/N F M, 2,100, Natural Gas (2) oliver of adrian Drill Point Grinders, Model 600A, S/N 8867 & Model PT, S/N 2054 nu-mark 20-1/2" Floor type Drill Press, S/N 05075, 18-1/2" x 16" Table, 150-4,200 RPM DaYton 12" Disc sander KalaMaZoo Horizontal Band saw (Parts / Repair) Custom Facing & Milling Machine (Parts / Repair) TRUCKS CHEVRolEt Dually Flatbed truck, Auto, Air, AM/FM, Gas, 12' Bed, 186,868 Miles, VIN 1GBJC34KPE IntERnatIonal truck tractor (Parts / Repair) MISCELLANEOUS ClEMCo abrasive Blast Cleaner, Model 2024, 6.0 Cu/Ft Capacity nilfisk advance sweeper / scrubber, Model Captor4800, Riding Type LP, S/N (13) VERsaGUaRD & GloBal Flexible Barrier system 900-Gallon argon Refrigerated air tank 660-Gallon air Header tank thermco Gas Mixer, Model 6105, S/N 14704, 0-50% CO2 in Argon SCFH, PSIG out WEBEn JaRCo automatic Circulating Water Heater, Model AJH120, S/N 59448, 1,200,000 BTU, Natural Gas 2005 MInUtEMan Powerboss Floor sweeper/scrubber, Model TSS/90, S/N , LPG, Variable Speed, 665 Hours 2005 MInUtEMan Powerboss Electric Floor sweeper/scrubber, Model MC40005QP, S/N , - Volt, 743 Hours (2) landa Pressure Washers, Model PHW C, S/N , 4-GPM, 2,200-PSI, 225 Heat, Electric / Fuel Oil (2) landa Pressure Washers, Electric, Model EHW C, S/N & , 120 F Max, 4.2-GPM, 2,000- PSI adaptive VaR Compensator transformer, Type 600/1700-2P, S/N LEBLOND DUAL DRIVE ENGINE LATHE (2) OLIVER OF ADRIAN DRILL POINT GRINDERS 90062, 15 Step Capacitor, 1700 Max KVA, Outdoor Type sola Hevi Duty transformer, 75- KVA, Model T2H75 PRoFoRMER 30-KVa transformer HoBaRt & EXIDE 24 to 48-Volt Battery Chargers FMC syntron 8' x 12' Incline Belt Conveyor (Parts / Repair) (20) 20,000-lb. Metal Horses (Parts / Repair) (3) VIDMaR Cabinets, (2) 11-Drawer, (1) 7-Drawer Marley Radiant Heaters (28) HIllMan Roller Machine skates large Quantity Heavy lifting Equipment, Chains, Plate Grabbers, Nylon Slings and Related assorted Hardware, Vee Belts, Wiring, Furnace Filters, Crane Parts, Machine Repair Parts, Taper Shank Drills, Reamers, Taps, Collets, Chucks, Assorted Jobsite Tool Boxes, Air Circulators, Pedestal Fans, Pipe Stand, Roller Stands, Layout Tables, Transit & Laser Stands, Hose Material, Clamps, Ladders, Lifting Chains, Desks, Chairs, Files, Bookcases, Overhead Projectors SALE CONDUCTED BY: 1 OF

12 PUBLIC Plant ClosInG PUBLIC PLANT CLOSING THERMAL ENGINEERING INTERNATIONAL 2110 Industrial Road in Sapulpa, OK (Approx. 15 Miles Southeast of Tulsa) THURSDAY, FEB. 13TH STARTS AT 10AM Inspection: Day prior to auction from 9AM - 4PM Myron Bowling Auctioneers P.O. BOX 369 ROSS, OHIO VANGUARD WELDING MANIPULATOR OF Important Mail PRE-SORT FIRST CLASS U.S. POSTAGE PAID CINCINNATI, OHIO PERMIT NO FIRST CLASS MAIL! TRACK MOBILE TM4000 RAILCAR TRANSFER TO BE DIRECTED NEWTO THE ATTENTION EXECUTIVE 1984 PERSONNEL Updated 2011 BERTSCH 3-1/2 X 10 HEAVY DUTY PLATE BENDING ROLL THERMAL ENGINEERING INTERNATIONAL 2110 Industrial Road in Sapulpa, OK THURSDAY, FEB. 13TH STARTS AT 10AM Inspection: Day Prior to auction from 9AM - 4PM IMPORTANT NOTICE: Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the sale. This brochure is intended to provide general information of the equipment being offered and is subject to errors, omissions, additions or deletions. Please check with the Auctioneer s Office for a final listing. Items offered may or may not necessarily be sold as described and/or photographed in this brochure. MAIL BIDS ACCEPTED WITH A 25% DEPOSIT Plant ClosInG TERMS OF SALE All of the above is sold as is, where is to the highest bidder or bidders for cash in accordance with our regular terms and conditions of sale. A deposit of 25% on all purchases is required in cash, certified or cashier s check, made payable to Myron Bowling Auctioneers, Inc. Firm or personal checks accepted only if accompanied by a letter of credit from your bank guaranteeing your funds. Balance due at conclusion of sale. All sales are subject to state and/or local sales tax, unless a signed exemption form is presented at the time of purchase. No merchandise may be removed while the sale is in progress. 15% buyer s premium in effect for in-person bidding and 18% for online bidding at this sale. AUCTIONEERS Sale managed by Myron Bowling Auctioneers, Inc. and conducted by Myron Bowling, Buyer s Premium: 15% Onsite, 18% Online DIRECTIONS From the Tulsa International Airport, follow signs to OK-11 W and go 3.3 miles to US-75 S. Go 3 miles South on US-75 to I-244 W / US-412 W. Go 5.8 Miles West on I-244 W and continue another mile on I-44 W to OK-66 w/new Sapulpa Rd. Go 4.2 Miles to 98th Street S. Turn right and go.6 miles to Industrial Road. Turn left and follow signs to parking. LODGING Hampton Inn - (800) S Olympia Ave Comfort Inn & Suites - (877) Casper St Holiday Inn Express - (888) Aquarium Dr Industries (1991) Inc. AUCTIONEERS LIQUIDATORS APPRAISERS